summaryrefslogtreecommitdiff
path: root/src/soc/amd/stoneyridge/gpio.c
AgeCommit message (Collapse)Author
2021-09-23soc/amd/common/blocks/include: rename gpio_banks.h to gpio.hFelix Held
This brings the AMD SoC GPIO code in line with the Intel SoC code and removes the not really needed suffix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie2dbec81dfe503869beb2872b01a7475e2b88b33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-08soc/amd: remove special GPIO_2 override soc_gpio_hookKyösti Mälkki
This override was added to have the SCI mapping configured if GPIO was used as WAKE_L pin. This however didn't set up the SCI level and trigger information, so it likely never worked as intended. Change-Id: I44661f05c8f517ece88714c625603579731d174b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-29soc/amd/*/gpio: include types.h instead of stdint.h to have size_tFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7a747d4c28e6d449c054ce83966767e13b51a939 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-02-10soc/amd: Move soc_route_sci to common/blocks/smi/smi_utilFelix Held
Change-Id: Ic379723c0bf6e5edf5f3d63cc11b24d0e59b5075 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42988 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02soc/amd: factor out common SMI/SCI enums and function prototypesFelix Held
At least a part or the remaining definitions in the soc-specific smi.h files are also common, but those have to be verified more closely. Change-Id: I5a3858e793331a8d2ec262371fa22abac044fd4a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-05soc/amd: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I22fffa0eab006be2bad4d3dd776b22ad9830faef Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-18soc: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-06-06soc/amd/stoneyridge: Move GPIO support to commonMarshall Dawson
The banked GPIO functionality in the AcpiMmio block has been consistent since the Mullins product. Move the basic support into a common directory. Each product's pin availability, MUXes, and other details must remain specific to the product. The relocated source also drops the weak configure_gevent_smi() that reports SMI is not available. The stoneyridge port relies on SMI to do its initialization, similar to modern soc/intel devices. This is the plan for future soc/amd ports, so make a missing function a build error instead of a runtime warning. BUG=b:131682806 Change-Id: I9cda00210a74de2bd1308ad43e2b867d24a67845 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-16soc/amd/stoneyridge: Move I2C bus clear out of gpio.cMarshall Dawson
Relocate the I2C bus reset code from gpio.c to i2c.c. When it first went in, gpio.c was a natural location due to the nature of the algorithm. This is preparation for moving most of gpio.c to common code. Change-Id: I3b2d8e1b54e7c5929220d763bd99fe01b0636aaa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32650 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/amd/common: Create AcpiMmio functionality from stoneyridgeMarshall Dawson
Move the stoneyridge AcpiMmio code into soc/amd/common. The SB800 southbridge introduced the MMIO hardware blocks at 0xfed80000 commonly known as AcpiMmio. Implementations beginning with Mullins enable decode in PMx04. Older designs use PMx24 and allow for configuring the base address. Future work may support the older version. Comparing the documentation for AMD's RRGs and BKDGs, it is evident that the block locations have not been reassigned across products. In some cases, address locations are deprecated and new ones consumed, e.g. the early GPIO blocks were simpler at offset 0x100 and the newer GPIO banks are now at 0x1500, 0x1600, and 0x1700. Note: Do not infer the definitions within the hardware blocks are consistent across family/model products. BUG=b:131682806 Change-Id: I083b6339cd29e72289e63c9331a815c46d71600d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32649 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-08soc/amd/stoneyridge: Add iomux read/write functionsMarshall Dawson
Add functions to read and write the region in the AcpiMmio block. Convert gpio.c to use them instead of creating pointers. Change-Id: I2a0f44b6ec7261648cf0357b44a6c18dd40d1504 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-08soc/amd/stoneyridge: Rename AcpiMmio blocksMarshall Dawson
A subsequent patch will move the AcpiMmio support into amd/common. Take this opportunity to rename the blocks in the 0xfed8xxxx region with more consistency. Change-Id: I9a69a6ecfc10f78b4860df05a77a061d2fc8be7d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
MMIO operations are arch-agnostic so the include path should not be arch/. Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-28amd/stoneyridge: Disable GPIO MASK STATUSRaul E Rangel
MASK_STATUS disables interrupt status generation for the entire GPIO controller when any debounce register is configured. This causes problems when the kernel is loading drivers because we could lose interrupts for previously loaded devices. sb_program_gpios is also not setup to wait when configuring PAD_DEBOUNCE, so there is a potential that we could lose the interrupt status enable bit for other registers. By disabling MASK_STATUS we avoid that problem. BUG=b:113880780 BRANCH=none TEST=Ran a reboot stress test that concluded that we are no longer losing TPM interrupts while booting. Change-Id: Ife1db3b1449f205092509595cbc3eca511bff57a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/31082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-01-21Revert "soc/amd/stoneyridge/gpio: Configure debounce for irq gpios"Raul Rangel
This reverts commit b82afce18aff24b6e5e3b73a67a6533cc4865a26. Reason for revert: This causes depthcharge to not boot due to TPM timeout errors. Because there is no wait after setting the debounce register, we lose data because the read-modify-write loses the interrupt status bit. e.g., GPIO 5 sets debounce, without a wait. Then GPIO 9 has it's debounce set. Because the interrupt controller is masking the interrupt enable status bit, the read-modify-write for GPIO9 loses the interrupt enable status bit and it never gets set again. This causes the interrupt to never latch. We should possibly make depthcharge set the interrupt enable status bit for latched GPIOs. Change-Id: Idd7259b14b24c441529d64e173be9faec03f4fc8 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/30981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-01-16soc/amd/stoneyridge/gpio: Configure debounce for irq gpiosDaniel Kurtz
FT4 has a strange property where whenever the debounce registers for any one gpio are changed, the FT4 disables interrupt propagation for ALL gpio irqs for ~4ms. In other words, if an edge interrupt of one gpio happens exactly during this debounce-irq-off window immediately following the configuration of another gpio, the interrupt will be lost. It is quite difficult to deal with this in the kernel, since during kernel boot time, drivers & devices are probed asynchronously, meaning it may happen that an already loaded driver may miss an interrupt when some later driver is being probed and configuring its gpio interrupt. To eliminate this possibility, we pre-configure the debounce registers in ram stage for all gpios that will be used as irqs later by the kernel using the same configuration as used by the kernel, as per this table: IRQ Debounce Edge Remove Glitch Level High Preserve Low Glitch Level Low Preserve High Glitch Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=b:113880780 BRANCH=none TEST=Reboot stress test grunt (>100 times); no messages in dmesg like: tpm tpm0: Timeout waiting for TPM ready Change-Id: I94c7ecfb14e5bb209b3598e10287c80eb19da25b Reviewed-on: https://review.coreboot.org/c/30921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
Change-Id: I2e28b9f4ecaf258bff8a062b5a54cb3d8e2bb9b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-18soc/amd/stoneyridge: Remove double defined GPIO MMIO basesRichard Spiegel
GPIO control a mux base addresses are defined within MMIO definitions and again bellow as GPIO specific base addresses. Eliminate those outside MMIO bases. Rename them to something indicating that they are both MMIO and related to GPIO. BUG=b:117754420 TEST=Build grunt. Change-Id: I53f7cf17d6267e6f8daa650b5f864bab688dc3f0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29156 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10soc/amd/stoneyridge/gpio.c: Create I2C slave reset codeRichard Spiegel
AMD's SOC do not wait for I2C transactions to complete before executing a reset. Because of this, it's possible for the reset to happen in the middle of a transaction, resulting on a slave hang. There are 2 possible solutions: If the slave has a reset pin connected to a GPIO pin, it can be used to reset the slave, else the only solution is to bang SCL 9 times. Create code that makes it easy to implement SCL bang, using a devicetree register to define which I2C SCL lines needs to be reset. BUG=b:114479395 TEST=Build and boot grunt. Look at transactions on a scope. Change-Id: I7f74b7e45c509044825355874753969f074e2382 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28574 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-12soc/amd/stoneyridge: Fix more GPIO functionsJonathan Neuschäfer
Instead of gpio_num, gpio_address should be used as the address in write32. This lets us also get rid of a few casts. Commit c9ed3ee8d8 ("soc/amd/stoneyridge: Fix gpio_set function") fixed one instance of this bug, but it was more widespread. TEST=None Change-Id: I0cf87aac2f1b87b6eac2b506515e48fe908c1f2b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-16soc/amd/stoneyridge: Fix gpio_set functionMarc Jones
The gpio_set function was not writing the correct GPIO register address. Change-Id: Ib306773ac72505977b606836bbaf3e2067324894 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-13soc/amd/stoneyridge/acpi.c: Create GPIO acpigen proceduresRichard Spiegel
There are some acpigen functionality that have not been implemented. They are defined as week within acpigen.c, in order to not break the build. This adds stoneyridge specific versions. BUG=b:79546790 TEST=Build grunt with added debug code to gpio_lib.asl. Boot to OS, activate ACPI debug, activate S3 stress test. Interrupt stress test, do a "cat /var/log/messages" saving the serial output. Examine the serial output, see added debug code showing action taken. Confirm action by reading proper register. Debug code removed. Change-Id: I9062d889f828a3175b89e6f4a3659ebbf90eac68 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-08amd/stoneyridge: Set SCI_MAP for SCI enabled GPIOsDaniel Kurtz
By default we use a 1:1 mapping between GEVENT bits and the corresponding SCI_MAP entry. However, we still must program the SCI_MAP entries with the GEVENT number. BUG=b:109759838 TEST=(1) powerd_dbus_suspend (2) move finger on touchpad for ~1 second => system resumes from S3 Change-Id: Ie7be45264f9bfec56efc47a03071fdb924d16b6a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26930 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-27stoneyridge GPIO: Create and use PAD_INT for interrupt pinsRichard Spiegel
The default interrupt control for GPIO pins within stoneyridge is for edge triggered, high. However, sometimes these need to change, or maybe the interrupt needs to be reported or delivered. This was the case of platform grunt, where the interrupt related bits were being changed afterwards. Ideally all the bits should be programmed through the same procedure. Create several PAD_INT definitions (for general configuration, for trigger configuration and for interrupt type configuration) and change function sb_program_gpios() to accept the output from PAD_INT_XX and program all the necessary bits while keeping compatibility with other PAD_XX definitions. BUG=b:72875858 TEST=Add code to report GPIO and interrupt configuration, build grunt and record a baseline. Add new code, rebuild grunt and record a test output. Compare baseline against test, there should be no change in GPIO or interrupt programming. Remove code that reports GPIO/interrupt configuration. Change-Id: I3457543bdf64ec757fd82df53c83fdc1d03c1f22 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-30soc/amd/stoneyridge/gpio.c: Fix gpio_output()Richard Spiegel
Function gpio_output() is only setting the pin as an output, when in fact it should also set the state (high/low) of the pin. Fix the procedure to set the state of the pin. BUG=b:78328773 TEST=None Change-Id: I516192a0782a9bbb40124029f264a2711114c800 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-21soc/amd/stoneyridge: Add functions for GPIO interruptsChris Ching
Add a function to configure interrupt settings for a GPIO. This does not currently configure GEVENT signals. The second function returns the GPIO interrupt status and clears the flag if set. BUG=b:72838769 BRANCH=none TEST=Update and test interrupt settings for GPIO_9 on grunt Change-Id: I1addd3abcb6a57d916b1c93480bacb0450abddf2 Signed-off-by: Chris Ching <chingcodes@chromium.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-30soc/amd/stoneyridge: fix gpio_acpi_path()Aaron Durbin
The path for the GPIO devices needs to be '\_SB', not '\SB'. Fix the path so that it references the system bus. BUG=b:72121803 Change-Id: I7c6c38ecea0f8f95ff52b3390f92c5b7e79bcd6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23501 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-25src/amd/stoneyridge: Add devicetree ACPI namesJustin TerAvest
This commit adds device name to ACPI name bindings for various entries in the devicetree. BUG=b:72121803 Change-Id: I5564e4a7e56fdd1bc9f34497bdb78383093a2ba3 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-27amd/stoneyridge: Refactor GPIO functionsMarc Jones
Refactor the GPIO functions to use GPIO numbers. This is more consistent with other GPIO code in coreboot. BUG=b:66462235 BRANCH=none TEST=Build and boot Kahlee Change-Id: I6d6af7f6a0ed9ba1230342e1ca024535c4f34d47 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-04soc/amd/stoneyridge: Use generic gpio libraryMarc Jones
Use the genric GPIO library. Add the required functions. Also, update the Kahlee mainboard dependency to match. Change-Id: I2ea562b052401efff3101f736788ca77d21e6de6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20543 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-27soc/amd/stoneyridge: Fix most checkpatch errorsMarshall Dawson
Correct the majority of reported errors and mark most of the remaining ones as todo. (Some of the lines requiring a >80 break are indented too much currently.) Some of the alignment in hudson.h still causes checkpatch errors, but this is intentionally left as-is. Also make other misc. changes, e.g. consistency in lower-case for hex values, using defined values, etc. These changes were confirmed to cause no changes in a Gardenia build. No other improvements were made, e.g. changing to helper functions, or converting functions like __outbyte(). BUG=chrome-os-partner:622407746 Change-Id: I768884a4c4b9505e77f5d6bfde37797520878912 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc: Add AMD Stoney Ridge southbridge codeMarc Jones
Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This is the first of a series of patches to migrate Stoney Ridge support from cpu, northbridge, and southbridge to soc/ Changes: - add soc/amd/stoneyridge and soc/amd/common - remove all other Husdon versions - update include paths, etc - clean up Kconfig and Makefile - create chip.c to contain chip_ops Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:14:52 +0000