summaryrefslogtreecommitdiff
path: root/src/soc/amd/stoneyridge/chip.h
AgeCommit message (Collapse)Author
2019-12-11soc/amd/stoneyridge|mb: Add Kconfig symbol for Prairie FalconMarshall Dawson
The stoneyridge code inferred that if Merlin Falcon was built but no Merlin Falcon binaries were present, the intent must be Prairie Falcon. The two falcons are Embedded variants, and Prairie Falcon falls within Family 15h Models 70h-7Fh. Add a Prairie Falcon symbol that can be used explicitely. Drop HAVE_MERLINFALCON_BINARIES. Change-Id: I0d3a1bc302760c18c8fe3d57c955e2bb3bd8153a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-31soc/amd/stoneyridge: Change code to accommodate Merlin Falcon SOCRichard Spiegel
Stoney Ridge is family 15h models 70h-7Fh, Merlin Falcon is family 15h models 60h-6Fh. Add changes based on config parameter SOC_AMD_MERLINFALCON to make the code backward compatible with Merlin Falcon. BUG=none. TEST=Tested later with padmelon board. Change-Id: I00fe832324500bcb07fca292a0a55f7258a2d82f Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33624 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/amd/stoneyridge: Move I2C bus clear out of gpio.cMarshall Dawson
Relocate the I2C bus reset code from gpio.c to i2c.c. When it first went in, gpio.c was a natural location due to the nature of the algorithm. This is preparation for moving most of gpio.c to common code. Change-Id: I3b2d8e1b54e7c5929220d763bd99fe01b0636aaa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32650 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-09mb/google/kahlee: Tune eDP panel initialization timeChris Wang
1. Add two parameters for panel initialization timing. > lvds_poseq_varybl_to_blon > lvds_poseq_blon_to_varybl 2. The BL_PWM is controlled by APU_EDP_BKLTEN_L/APU_DP_VARY_BL/ EDP_BKLTEN_L, so move APU_EDP_BKLTEN_L to early init stage, and be enabled depends on SKU, thus we can control the delay time by config APU_DP_VARY_BL. BUG=b:118011567 TEST=emerge-grunt coreboot. Change-Id: Ib20c48813b208d697b950b2f02a70a690e483fdb Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-11amd/stoneyridge: Indicate STAPM units in their nameRichard Spiegel
STAPM devicetree registers do not indicate the unit, which causes confusion. More importantly, the time was assumed to be in seconds when it's actually milliseconds. This caused early STAPM configurations to fail. BUG=b:117590953 TEST=Build grunt Change-Id: I2a7e3d43601992d1f7b02456913c763d940fe9ee Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29035 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10soc/amd/stoneyridge/gpio.c: Create I2C slave reset codeRichard Spiegel
AMD's SOC do not wait for I2C transactions to complete before executing a reset. Because of this, it's possible for the reset to happen in the middle of a transaction, resulting on a slave hang. There are 2 possible solutions: If the slave has a reset pin connected to a GPIO pin, it can be used to reset the slave, else the only solution is to bang SCL 9 times. Create code that makes it easy to implement SCL bang, using a devicetree register to define which I2C SCL lines needs to be reset. BUG=b:114479395 TEST=Build and boot grunt. Look at transactions on a scope. Change-Id: I7f74b7e45c509044825355874753969f074e2382 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28574 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-17mb/google/kahlee/variants/baseboard: Set STAPM percentageRichard Spiegel
Default STAPM percentage causes a lot of thermal throttling on grunt. AMD experimented with 80%, it works for grunt. This is initial code to provide easy change path for other grunt based platforms. BUG=b:111608748 TEST=build and boot grunt. Change-Id: I22863f6ed76152bf872fce3e275f8a7fd8077504 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-25soc/amd/stoneyridge: Add I2C devicetree support.Justin TerAvest
This commit establishes the stoneyridge implementation for i2c entries in the devicetree.cb file. BUG=b:72121803 Change-Id: I0d923609bd8fce94c9aee401a5ae2811281b60e5 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-20amd/stoneyridge: Fix SPD files and functions camel caseMarc Jones
Remove ugly camel case in the soc/amd/common and Stoney Ridge SPD files and functions. Update the related mainboards. Also, remove a unreferenced function prototype, smbus_readSpd(). Change-Id: I51045b6621f0708d61a570acbdcb4e6522baa1ea Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-10soc/amd/stoneyridge: Add UMA settings to devicetreeAaron Durbin
Add three settings for the UMA configuration to correspond with definitions in AGESA.h. * UMA off, Auto, or size specified * Size (if specified above) * Legacy vs. non-legacy (if Auto) BUG=b:64927639 Change-Id: I38b6603f365fdc1f1f615794365476f749e58be7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-10soc/amd/common: Add DRAM clear option to northbridge.cRichard Spiegel
AmdInitPost() can be instructed to clear DRAM after a reset or to preserve it. Use SetMemParams() to tell AGESA which action to take. Note that any overrides from OemPostParams (OemCustomize.c) are not affected by this change. Change-Id: Ie18e7a265b6e0a00c0cc8912db6361087f772d2d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/21856 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-03amd/stoneyridge: Clarify SPD structure in chip.hMarshall Dawson
Add #define values and clarify the spdAddrLookup array. Change-Id: I39b9913a2fd52f9105e4a771f651a8d9649202e6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21852 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-17soc/amd/stoneyridge: clean up chip.hMartin Roth
Remove obsolete register entries. BUG=None TEST=build Change-Id: Ia9beb9d42f0ee5d63d9e9073507fc606a9d45c46 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-28soc/amd: Standardize guards on header filesMartin Roth
The guards in the header files were inconsistent. Some had no leading or trailing underscores, some had one, some had both leading and trailing. Change all to double leading & trailing underscores. Change all comments to have a space before them instead of tabs BUG=b:62235990 Test=Build Kahlee Change-Id: I4466df529ab201c922096a31d7438381778b582f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-06-27soc/amd/stoneyridge: Fix most checkpatch errorsMarshall Dawson
Correct the majority of reported errors and mark most of the remaining ones as todo. (Some of the lines requiring a >80 break are indented too much currently.) Some of the alignment in hudson.h still causes checkpatch errors, but this is intentionally left as-is. Also make other misc. changes, e.g. consistency in lower-case for hex values, using defined values, etc. These changes were confirmed to cause no changes in a Gardenia build. No other improvements were made, e.g. changing to helper functions, or converting functions like __outbyte(). BUG=chrome-os-partner:622407746 Change-Id: I768884a4c4b9505e77f5d6bfde37797520878912 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc/amd/stoneyridge: Add northbridge supportMarc Jones
Copy northbridge files from northbridge/amd/pi/00670F00 to soc/amd/stoneyridge and soc/amd/common. Changes: - update chip_ops and device_ops - remove multi-node support - clean up Kconfig and Makefile Change-Id: Ie86b4d744900f23502068517ece5bcea6c128993 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc: Add AMD Stoney Ridge southbridge codeMarc Jones
Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This is the first of a series of patches to migrate Stoney Ridge support from cpu, northbridge, and southbridge to soc/ Changes: - add soc/amd/stoneyridge and soc/amd/common - remove all other Husdon versions - update include paths, etc - clean up Kconfig and Makefile - create chip.c to contain chip_ops Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>