summaryrefslogtreecommitdiff
path: root/src/soc/amd/stoneyridge/acpi.c
AgeCommit message (Collapse)Author
2019-06-06soc/amd/stoneyridge: Relocate MMIO access of ACPI registersMarshall Dawson
The AcpiMmio block allowing direct access to the ACPI registers has remained consistent across AMD models. Move the support from soc//stoneyridge to soc//common. BUG=b:131682806 Change-Id: I0e017a71f8efb4b614986cb327de398644599853 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32655 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move GPIO support to commonMarshall Dawson
The banked GPIO functionality in the AcpiMmio block has been consistent since the Mullins product. Move the basic support into a common directory. Each product's pin availability, MUXes, and other details must remain specific to the product. The relocated source also drops the weak configure_gevent_smi() that reports SMI is not available. The stoneyridge port relies on SMI to do its initialization, similar to modern soc/intel devices. This is the plan for future soc/amd ports, so make a missing function a build error instead of a runtime warning. BUG=b:131682806 Change-Id: I9cda00210a74de2bd1308ad43e2b867d24a67845 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-16soc/amd/common: Create AcpiMmio functionality from stoneyridgeMarshall Dawson
Move the stoneyridge AcpiMmio code into soc/amd/common. The SB800 southbridge introduced the MMIO hardware blocks at 0xfed80000 commonly known as AcpiMmio. Implementations beginning with Mullins enable decode in PMx04. Older designs use PMx24 and allow for configuring the base address. Future work may support the older version. Comparing the documentation for AMD's RRGs and BKDGs, it is evident that the block locations have not been reassigned across products. In some cases, address locations are deprecated and new ones consumed, e.g. the early GPIO blocks were simpler at offset 0x100 and the newer GPIO banks are now at 0x1500, 0x1600, and 0x1700. Note: Do not infer the definitions within the hardware blocks are consistent across family/model products. BUG=b:131682806 Change-Id: I083b6339cd29e72289e63c9331a815c46d71600d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32649 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-01device/pci: Fix PCI accessor headersKyösti Mälkki
PCI config accessors are no longer indirectly included from <arch/io.h> use <device/pci_ops.h> instead. Change-Id: I2adf46430a33bc52ef69d1bf7dca4655fc8475bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-03-01ACPI: Rename FADT model and set it to zeroElyes HAOUAS
INT_MODEL defined in ACPI 1.0 and renamed to reserved since V 2.0. The value for this field is zero but 1 is allowed to maintain compatibility with ACPI 1.0. So set this value to zero as we are using greater version than ACPI 1.0. Change-Id: I910ead4e5618c958a7989f4c309a3a4bb938e31a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29986 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: David Guckian Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-21ACPI: Correct asl_compiler_revision valueElyes HAOUAS
Change-Id: I91b54b43c8bb5cb17ff86a6d9afa95f265ee49df Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-03soc/amd/stoneyridge: Use new ACPI MMIO functionsRichard Spiegel
Replace IO access to ACPI registers with the new MMIO access functions. BUG=b:118049037 TEST=Build and boot grunt. Test ACPI related functionality. Change-Id: I7544169bb21982fcf7b1c07ab7c19c6f5e65ad56 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-29arch/acpi.h: Add some update to version 6.2aElyes HAOUAS
Some tables updated to comply with ACPI version 6.2a. Change-Id: I91291c8202d1562b720b9922791c6282e572601f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-11-28soc/amd/stoneyridge: Replace public magic numbersPatrick Georgi
Some "magic" numbers became public available registers/bits after the code was originally written. Find all magic numbers, and if available in a public BKDG than replace them with literals. BUG=b:117648026 TEST=Build and boot grunt. Change-Id: I96ac59fd92c4a5e27c3836f77bf6633e9b0c4990 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-12amd/stoneyridge: Convert hex definitions to lower caseMarshall Dawson
Match the rest of the soc/stoneyridge source. Change-Id: I4531e6dad0362be73499647d9fc93c168b6f163e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-09-06chromeos/gnvs: remove function and naming cleanupJoel Kitching
- Remove unused acpi_get_chromeos_acpi_info (see CB:28190) - Make function naming in gnvs.h consistent (start with "chromeos_") BUG=b:112288216 TEST=compile and run on eve Change-Id: I5b0066bc311b0ea995fa30bca1cd9235dc9b7d1b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-27update all FADT version 3.0 to use the get tables functionMarc Jones
Most FADT report using ACPIv3 FADT table. Using the get revision function keeps the table versions in sync. Change-Id: Ie554faf1be65c7034dd0836f0029cdc79eae1aed Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-22acpi: remove CBMEM_ID_ACPI_GNVS_PTR entryJoel Kitching
Since we can retrieve the address of ACPI GNVS directly from CBMEM_ID_ACPI_GNVS, there is no need to store and update a pointer separately. TEST=Compile and run on Eve Signed-off-by: Joel Kitching <kitching@google.com> Change-Id: I59f3d0547a4a724e66617c791ad82c9f504cadea Reviewed-on: https://review.coreboot.org/28189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-08soc/amd/stoneyridge/acpi.c: Remove fixed value variablesRichard Spiegel
In procedure generate_cpu_entries(), the code was copied from code that could change variables "plen" and "pcontrol_blk" based on number of cores. This is not the case with stoneyridge (2 cores only), and there's no need to use the variables. Remove them and replace with fixed values. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I0258b19960b050e8da9d218ded3f1f3bfccad163 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27877 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-03soc/amd/stoneyridge: correct GPIO emission error in ACPIKevin Chiu
It can not emit byte data without BytePrefix. design to: Or (Local5, GPIO_PIN_OUT, Local5) error due to GPIO_PIN_OUT is 0x40 but 0x40 encoding means nothing in AML spec. so it will include next emitted string in Or: Or (Local5, Local5, \_SB.GPW2) fix: Store (0x40, Local0) Or (Local5, Local0, Local5) BUG=b:110962003 BRANCH=master TEST=emerge-grunt coreboot extract SSDT then check ACPI syntax is correct Change-Id: I7a0704112b77105826de87b14a38ed2f665224d5 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-13soc/amd/stoneyridge/acpi.c: Create GPIO acpigen proceduresRichard Spiegel
There are some acpigen functionality that have not been implemented. They are defined as week within acpigen.c, in order to not break the build. This adds stoneyridge specific versions. BUG=b:79546790 TEST=Build grunt with added debug code to gpio_lib.asl. Boot to OS, activate ACPI debug, activate S3 stress test. Interrupt stress test, do a "cat /var/log/messages" saving the serial output. Examine the serial output, see added debug code showing action taken. Confirm action by reading proper register. Debug code removed. Change-Id: I9062d889f828a3175b89e6f4a3659ebbf90eac68 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-23stoneyridge: Store wake parameters in NVSRichard Spiegel
ACPI _SWS needs information on PM1 and ACPI events (though events can be read directly). Unfortunately PM1 is cleared in normal path and in resume path. Save PM1 and ACPI events in NVS to be accessed by ACPI _SWS. BUG=b:75996437 TEST=Build and boot grunt recording serial. Run suspend stress test, after 3 resumes closed file and examined for the message indicating what was being saved to NVS. Two different path, normal boot (first boot) and resume path had different PM1. Change-Id: If3b191854afb27779b47c3d8d9f5671a255f51b5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26208 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-23soc/amd/stoneyridge/: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I84fbc90b2a81fe5476d659716f0d6e4f0d7e1de2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-19soc/amd/stoneyridge: Use macros for PCI_DEVFN callsChris Ching
* Change all calls to PCI_DEVFN to macros * Remove CBB and CDB Kconfig since these are static for stoneyridge BUG=b:62200746 TEST=build Change-Id: I001c4ccd0ad7cf2047870b3618e13642144ddf56 Signed-off-by: Chris Ching <chingcodes@google.com> Reviewed-on: https://review.coreboot.org/22110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-30amd/stoneyridge: Use generic SMM command port valuesMarshall Dawson
Remove the old Hudson-specific SMM command port definitions and use the ones in cpu/x86/smm.h. Change-Id: I3de9a178e5f189ac1dbc921e41b69d47e3796a4f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-29amd/stoneyridge: Change ACPI _PR.CPxx to _PR.PxxxMarc Jones
This is a bug introduced by this commit: stoneyridge: Fix CPU ASL \_PR table [commit I870f81] The following error is found in dmesg ACPI Error: [\_PR_.P000] Namespace lookup failure, AE_NOT_FOUND... ACPI Exception: AE_NOT_FOUND, During name lookup/catalog... ACPI Exception: AE_NOT_FOUND, (SSDT:AGESA ) while loading table... ACPI Error: 1 table load failures, 3 successful... ... acpi-cpufreq: overriding BIOS provided _PSD data And, "ls -la /sys/devices/system/cpu/cpufreq/" doesn't work The cause is that the Pstate SSDT table generated by AGESA expects CPU variables \_PR.Pxxx, not \_PR.CPxx as generated by coreboot. Use Kconfig to set the required string. BRANCH=none BUG=b:64885241 TEST= Check dmeg and ls -la /sys/devices/system/cpu/cpufreq/ Change-Id: I4929f9a1c39705c6df9d965c8d030f4d1f0b5e5f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-14stoneyridge: Fix CPU ASL \_PR tableMarc Jones
The PMIO region was moved, but not updated in the ASL. Change to generate \_PR table runtime and to report the correct PMIO region and length. Fix on Kahlee, where the EC overlaps the region: [ 0.802721] cros_ec_lpcs GOOG0004:00: couldn't reserve region0 [ 0.807446] cros_ec_lpcs: probe of GOOG0004:00 failed with error -16 BUG=b:63902389 BRANCH=none TEST=Cros_ec_lps can reserve the region. ACPI tables are correct. Change-Id: I870f810cc5d2edc0b842478cde5b3c164ed3b47f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-14stoneyridge: Rename hudson to southbridgeMarc Jones
Simplify funciton names and remove reference to hudson in stoneyridge. The southbridge in Stoney Ridge is Kern and hudson naming is no longer accurate. BUG=b:62200157 BRANCH=none TEST=Build and booted on Kahlee. Change-Id: Ide7a72dae69b881997101f1e37a1ac739901744d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20912 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31soc/amd/stoneyridge: Move ACPI MADT table to socMarc Jones
Move the mainboard MADT tables to generic soc ACPI code. Change-Id: I49fb55b1315da8fe65421b43fc4312ed588d5ecb Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20277 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31soc/amd/stoneyridge: Add GNVSMarc Jones
Add ACPI asl for global non-volatile storage (GNVS). Change-Id: I9ecab92181bfe60e7b6c6e91ffb9fa843345352f Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/20275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 07:32:16 +0000