summaryrefslogtreecommitdiff
path: root/src/soc/amd/stoneyridge/Kconfig
AgeCommit message (Collapse)Author
2018-03-07soc/amd/stoneyridge/Kconfig: Create a power restore optionRichard Spiegel
File soc/amd/stoneyridge/sm.c has a CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL that's not used at all and has no control. It's also not used in the build process. Remove the define from sm.c, create a true Kconfig definition and use it to define if power should be restored after a power failure/recovery. BUG=b:72873003 TEST=Build kahlee. Use serial output to check what is being programmed to RTC shadow. Build with and without selecting the Kconfig parameter. Then remove serial output and leave the parameter unselected (always S5 at power recovery). Change-Id: Iec82cb68cf1e2a820e610f12d8620488662232aa Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-16amd/stoneyridge: Use generic fixed MTRR setupMarshall Dawson
Add the X86_AMD_FIXED_MTRRS select back to Kconfig. This got lost when stoneyridge was converted from a cpu/northbridge/southbridge implementation to soc/. Remove the setup from model_15_init.c because this is duplicated functionality. BUG=b:68019051 TEST=Boot Kahlee, check steps with HDT Change-Id: Id5526dcff12555efccab811fa3442ba1bff051bb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-12amd/stoneyridge: Add S3 support to POSTMarshall Dawson
Add/update the romstage and ramstage paths to check for S3 resume and call the appropriate AGESA functions. TEST=Suspend/Resume Kahlee with full S3 patch stack BUG=b:69614064 Change-Id: Ie6ae66f88b888fff3a800b4ed55dd1f6fed712b2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07amd/stoneyridge: Put stage cache into TSEGMarshall Dawson
Add a function to allow an external region to be located in TSEG. Select the option to use memory outside of cbmem. Increase the size reserved in TSEG. Change-Id: Ic1073af04475d862753136c9e14e2b2dde31fe66 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-25soc/amd/stoneyridge: remove dependence on TSCAaron Durbin
The TSC rate is empirically swinging during early boot. That leaves timestamps and udelay()s to not be correct. To rectify this stop using TSC for all of these time sources. Instead use the performance TSC which is at a fixed 100MHz clock. That provides stable time sources and legit timestamps. BUG=b:72378235,b:72170796 Change-Id: Ia2693c415c557aac687bcb48ee69358ea1c53d67 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-25src/soc/amd/stoneyridge/Kconfig: Use vbios new locationRichard Spiegel
3rdparty/blobs was updated to move northbridge/amd/00670F00 contents into soc/amd/stoneyridge. Now soc/amd/stoneyridge/Kconfig needs to be updated to use VBIOS.bin new location. BUG=b:70785272 TEST=Update 3rdparty/blobs master branch, try to build kahlee. It should fail. Update soc/amd/stoneyridge/Kconfig, try to build kahlee again, it should work (need to rebuild .config first). CQ-DEPEND=CL:881709 Change-Id: I8cb9874eedc4a5d41d42b3f727c6d3cb9b920b5a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-24soc/amd/stoneyridge: provide alternate monotonic timerAaron Durbin
The TSC has been observed to be ticking at a non-constant rate in early boot. The root cause is still not known, but this misbehavior necessitates an alternative monotonic timer source. Use the perf TSC which ticks at 100 MHz. This also means the timestamp table is not accurate as well. Root cause of TSC rate instability needs to be resolved in order to fix that. BUG=b:72170796 Change-Id: Ie052169868a9d9f25f8cc0ce8dd8251b560e671f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-01-08soc/amd/stoneyridge: Define CONSOLE_UART_BASE_ADDRESSArthur Heymans
The build system for the SeaBIOS payload needs this when DRIVERS_UART_8250MEM is set. Set it to the first uart controller, which the coreboot code also seems to do. Fixes: https://ticket.coreboot.org/issues/150 Change-Id: I962f750f89e0352082e0b7415ceaa9bd350fdf0b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-073rdparty/blobs/soc/amd/stoneyridge: Use new location of stoneyridge blobRichard Spiegel
Stoneyridge related contents of 3rdparty/blobs/southbridge/amd/kern were moved to 3rdparty/blobs/southbridge/amd/stoneyridge. Commit the new blob to coreboot, and modify src/soc/amd/stoneyridge/Kconfig to use it. BUG=b:69613465 TEST=Build and run kahlee. Change-Id: I1784824dc7767c620e2fcbad7c6e5674934832ff Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-03soc/amd/stoneyridge: Add I2C supportChris Ching
BUG=b:69416132 BRANCH=none TEST=make Change-Id: Id940af917c9525aba7bc25eea0821f5f36a36653 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-22amd/stoneyridge: Increase pre-cbmem console sizeMarshall Dawson
The existing stoneyridge pre-cbmem console log contains about 250 bytes of unused space. Increase this amount to accomodate any additional debug messages. BUG=b:64980233 TEST=Build and boot Kahlee, inspect console log with "cbmem -c" Change-Id: Ia307795e91d81ff9b2be027916081f6824f90bad Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22soc/amd/stoneyridge: select RTCMarc Jones
Stoneyridge has an RTC. Elog requires it for timestamps. BUG=b:65485690 TEST=Build Kahlee with Elog. Check mosys eventlog list for timestamps. Change-Id: I4d820fbe11043e7e3153d67159f52274d5f14bae Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-18amd/stoneyridge: Skip VGA initialization on S3 resumeMarshall Dawson
Sync with the other AMD implementations. Change-Id: I222cc7fcf5e58f451cee9621a1b876346226af09 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-12soc/amd/common: Move AGESA related source filesRichard Spiegel
Move AGESA related source files in soc/amd/common under block directory. Folder soc/amd/common/block subfolders should mimic soc/intel/common/block subfolders (one subfolder per subject). BUG=b:69262110 TEST=Build with no error gardenia and kahlee (no code change, just folder reorg). Change-Id: I497cdefe64e8dff00aaff7153c4ffa9c57c9acf8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-11soc/amd/common: Move files to common/blockRichard Spiegel
The following files need to be moved: amd_pci_util.c, amd_pci_util.h and spi.c. The remaining files are AGESA related and will be part of a separate issue/commit. BUG=b:62240201 TEST=Build with no error gardenia and kahlee (no code change, just folder reorg). Change-Id: I3f965afa21124d4874d3b7bfe0f404a58b070e23 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-11soc/amd/stoneyridge: Enable SPI writesJohn E. Kabat Jr
- Change soc/amd/stoneyridge/Kconfig to set BOOT_DEVICE_SUPPORTS_WRITES BUG=b:65485690 TEST=Build & boot kahlee. Change-Id: I595a27ac27daa42c2499de1a343bc30be9a89fa6 Signed-off-by: John E. Kabat Jr <john.kabat@scarletltd.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-08soc/amd/stoneyridge: Add RO_REGION_ONLYMarc Jones
We only need the apu firmware in the RO region when building for ChromeOS. Adding it to the RW regions is a waste of space. BUG=b:70027919 TEST=Build kahlee and use cbfstool to check for "apu/amdfw" sections. Change-Id: Ieafe4a5ec4a5e3177e4e23fcf42afa2626a0b19f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02soc/amd/stoneyridge: Add RunOnAP supportMarc Jones
Add support for AGESA callbacks RunFcnOnAp() and RunFcnOnAllAp(). Update the wording on the AP errors. The functions are not missing, they are not supported. BUG= b:66690176 BRANCH=none TEST=Check serial output for the AP calls from AGESA. Change-Id: Id30cb2e0c6cc474158f3a7710dbb8ecf54f1ffe4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-23soc/amd/stoneyridge: Get entire DDR4 SPDMarc Jones
Set the SPD size to 512 to get the entire DDR4 SPD. Change-Id: I0bdf8101de22533b2f4337d3c9e4423d62e6c66d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-10amd/stoneyridge: Select AMD common sleep statesMarshall Dawson
Change-Id: I2097293a1e843839bdc814345b1ec6437a6a0656 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08amd/stoneyridge: Add SMU firmware blobs to cbfsMarshall Dawson
Stoney Ridge supports two different sets of SMU firmware, one for either fanless OPNs and one for fanned. Add a Kconfig mechanism to select the proper set and add the blobs into cbfs. BUG=b:66339938 Change-Id: I8510823e2232b74ec6fe001cc28953f53b2aa520 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/amd/stoneyridge: Use macros for PCI_DEVFN callsChris Ching
* Change all calls to PCI_DEVFN to macros * Remove CBB and CDB Kconfig since these are static for stoneyridge BUG=b:62200746 TEST=build Change-Id: I001c4ccd0ad7cf2047870b3618e13642144ddf56 Signed-off-by: Chris Ching <chingcodes@google.com> Reviewed-on: https://review.coreboot.org/22110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-16soc/amd/stoneyridge: Update AMD firmware placement optionsMartin Roth
- Don't force the selection of placing the firmware outside of cbfs when using vboot. - Set a prompt to allow the option of placing it outside of cbfs. - Leave all Kconfig defaults the same. - Place the AMD firmware directory table in the specified location even when using the 'outside of cbfs" option. - Print where the firmware is being placed when placing it outside of cbfs. BUG=b:65484600 TEST=Assign PSP firmware location, build & test. Firmware shows up inside CBFS. Set 'outside of cbfs' option, verify firmware gets written to the correct location. Change-Id: Ia8258b5c2ecfaaa42d623e3376ec3233115aed58 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21867 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-03soc/amd/stoney: Allow alternative placement for AMD FW directoryMartin Roth
Allow the AMD FW directory to be placed at one of the alternative locations within the ROM. BUG=b:65484600 TEST=Assign PSP firmware location, build & test. Change-Id: I9c95b9805c60ab6204750f7929049c7382e0c6cd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-27soc/amd/stoneyridge: Enable SSEMartin Roth
BUG=b:66997392 TEST=Flash to Kahlee, system no longer resets when the compiler uses SSE instructions. Change-Id: I7c1aed9ecfa6f3496760dcda422ddf184e2a043c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-27soc/amd/stoneyridge: Add postcar stageMarshall Dawson
Insert a postcar stage for Stoney Ridge and move romstage's CAR teardown there. The AMD cache-as-ram teardown procedure currently uses a wbinvd instruction to send CAR contents to DRAM backing. This allows preserving stack contents and CAR globals after the teardown happens, but likely results in memory corruption during S3 resume. Due to the current base of the DCACHE region, reverting to an invd instruction will break the detection mechanism for CAR migrated variables. Using postcar avoids this problem. The current behavior of AGESA is to set up all cores' MTRRs during the AmdInitPost() entry point. This implementation takes control back and causes postcar's _start to clear all settings and set attributes only for the BIOS flash device, TSEG, and enough space below cbmem_top to load and run ramstage. BUG=b:64768556 Change-Id: I1045446655b81b806d75903d75288ab17b5e77d1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-27amd/stoneyridge: Enable SMM in TSEGMarshall Dawson
Add necessary features to allow mp_init_with_smm() to install and relocate an SMM handler. SMM region functions are added to easily identify the SMM attributes. Adjust the neighboring cbmem_top() rounding downward to better reflect the default TSEG size. Add relocation attributes to be set by each core a relocation handler. Modify the definition of smi_southbridge_handler() to match TSEG prototype. BUG=b:62103112 Change-Id: I4dc03ed27d0d109ab919a4f0861de9c7420d03ce Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-27amd/stoneyridge: Convert MP init to mp_init_with_smmMarshall Dawson
Change the Stoney Ridge SOC to a more modern method for setting up the multiple cores. Add a new cpu.c file for most of the processor initiliazation. Build mp_ops with the necessary callbacks. Note also that this patch removes cpu_bus_scan. Rather than manually find CPUs and add them to the devicetree, allow this to be done automatically in the generic mp_init.c file. SMM information is left blank in mp_ops to avoid having mp_init.c install a handler at this time. A later patch will add TSEG SMM capabilities for the APU. This patch also contains a hack to mask the behavior of AGESA which configures the MTRRs and Tom2ForceMemTypeWB coming out of AmdInitPost. The hack immediately changes all WB variable MTRRs, on the BSP, to UC so that all writes to memory space will make it to the DRAM. BUG=b:66200075 Change-Id: Ie54295cb00c6835947456e8818a289b7eb260914 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-26amd/stoneyridge: Simplify memory hole calculationMarshall Dawson
Delete the obselete Kconfig symbols regarding the memory hole. Integrate the hole check into domain_set_resources(). The hardware configuration is done by AGESA, so only discover the setting and adjust the mmio_basek accordingly. BUG=b:66202887 TEST=Check settings with HDT Change-Id: Id15a88897e29bff28ab7c498dc4d3818834f08b2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13amd/stoneyridge: Make cbmem_top SMM awareMarshall Dawson
Make the default for SMM_TSEG_SIZE depend on SMM_TSEG in addition to HAVE_SMI_HANDLER. Change the value returned by cbmem_top() to carve out a range to be used by TSEG. The SMM Mask register has a granularity of 128KB but align the value to 16MB to keep down the number of variable MTRRs required. Change-Id: I54ffc10108862b7d022fbbd92bf97525b349df27 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-08soc/amd/stoneyridge: Update amdfw buildMartin Roth
- The SMU firmware used to be named *.sbin, now is named *.csbin. Update the makefile so that the files can be named as they are delivered and don't have to be renamed. - Add a Kconfig option to allow the secure os binaries to be excluded. BUG=b:64932297 TEST=Build with old and new firmware, verify file sizes. Change-Id: I3091f8af126159488c3c398a6dc881fa05039cff Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-29amd/stoneyridge: Change ACPI _PR.CPxx to _PR.PxxxMarc Jones
This is a bug introduced by this commit: stoneyridge: Fix CPU ASL \_PR table [commit I870f81] The following error is found in dmesg ACPI Error: [\_PR_.P000] Namespace lookup failure, AE_NOT_FOUND... ACPI Exception: AE_NOT_FOUND, During name lookup/catalog... ACPI Exception: AE_NOT_FOUND, (SSDT:AGESA ) while loading table... ACPI Error: 1 table load failures, 3 successful... ... acpi-cpufreq: overriding BIOS provided _PSD data And, "ls -la /sys/devices/system/cpu/cpufreq/" doesn't work The cause is that the Pstate SSDT table generated by AGESA expects CPU variables \_PR.Pxxx, not \_PR.CPxx as generated by coreboot. Use Kconfig to set the required string. BRANCH=none BUG=b:64885241 TEST= Check dmeg and ls -la /sys/devices/system/cpu/cpufreq/ Change-Id: I4929f9a1c39705c6df9d965c8d030f4d1f0b5e5f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-28soc/amd/stoneyridge: Increase preram console sizeMarshall Dawson
Increase the default setting to add more CAR space for the early console. This avoids truncation of the log. BUG=b:64980233 Change-Id: Ia11d1c6c186a7025510c240206743ebe8d741461 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21186 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-04soc/amd/stoneyridge: Use generic gpio libraryMarc Jones
Use the genric GPIO library. Add the required functions. Also, update the Kahlee mainboard dependency to match. Change-Id: I2ea562b052401efff3101f736788ca77d21e6de6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20543 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27soc/amd/stoneyridge: Enable verstage supportMarshall Dawson
Add Kconfig selects for vboot and update the makefile to pick up files to be used in verstage. Change-Id: If5c439a330d687156006aec2ebaea18ff2c96b3e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19756 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27soc/amd/common: Convert to C_ENVIRONMENT_BOOTBLOCKMarshall Dawson
Add dedicated CAR setup and teardown functions and Kconfig options to force their inclusion into the build. The .S files are mostly duplicated code from the old cache_as_ram.inc file. The .S files use global proc names in anticipation for use with the Kconfig symbols C_ENVIRONMENT_BOOTBLOCK and POSTCAR_STAGE. Move the mainboard romstage functionality into the soc directory and change the function name to be compatible with the call from assembly_entry.S. Drop the BIST check like other devices. Move InitReset and InitEarly to bootblock. These AGESA entry points set some default settings, and release/recapture the AP cores. There are currently some early dependencies on InitReset. Future work should include: * Pull the necessary functionality from InitReset into bootblock * Move InitReset and InitEarly to car_stage_entry() and out of bootblock - Add a mechanism for the BSP to give the APs an address to call and skip most of bootblock and verstage (when available) (1) - Reunify BiosCallOuts.c and OemCustomize.c (1) During the InitReset call, the BSP enables the APs by setting core enable bits in F18F0x1DC and APs begin fetching/executing from the reset vector. The BSP waits for all APs to also reach InitReset, where they enter an endless loop. The BSP sends a command to them to execute a HLT instruction and the BSP eventually returns from InitReset. The goal would be to preserve this process but prevent APs from rerunning early code. Change-Id: I811c7ef875b980874f3c4b1f234f969ae5618c44 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-02soc/amd/common: Add initial support for AMD PSPMarshall Dawson
Add files for supporting the BIOS->PSP communication not covered by AGESA. The first command implemented notifies the PSP that DRAM is ready. This patch also introduces the amd/common/block directory structure similar to intel/common/block. Change-Id: I34b2744b071aa3dfb1071b2aabde32ddb662ab87 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-29soc/amd/stoneyridge: Convert monotonic timerMarshall Dawson
Use the TSC for the Stoney Ridge monotonic timer. Modern AMD CPUs have invariant timestamp counters. This patch brings the feature more in line with other devices and allows the use of typical monotonic timer functions. BUG=chrome-os-partner:62578062 Change-Id: I07b05fbc7cdea54a45daac01954284a9fd67e42f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-28soc/amd/stoneyridge: Enable early cbmemMarshall Dawson
Add a memmap file with a cbmem_top() function. Remove the LATE_CBMEM_INIT, allowing the default of EARLY. Remove calls to the late-only set_top_of_ram() function. Change-Id: I11ad7190031c912642a7312f2fc6f792866288b7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/amd/stoneyridge: Add tseg size to KconfigMarshall Dawson
Add a SMM_TSEG_SIZE symbol that can be used in top of memory calculations. Change-Id: I26f3b06f85f0cf5613656c1d5df55bd9ea4bbbbc Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19750 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-26soc/amd/stoneyridge: Add northbridge supportMarc Jones
Copy northbridge files from northbridge/amd/pi/00670F00 to soc/amd/stoneyridge and soc/amd/common. Changes: - update chip_ops and device_ops - remove multi-node support - clean up Kconfig and Makefile Change-Id: Ie86b4d744900f23502068517ece5bcea6c128993 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc/amd/stoneyridge: Add CPU filesMarc Jones
Copy cpu/amd/pi/00670F00 to soc/amd/stoneyridge and soc/amd/common. This is the second patch in the process of converting Stoney Ridge to soc/. Changes: - update Kconfig and Makefiles - update vendorcode/amd for new soc/ path Change-Id: I8b6b1991372c2c6a02709777a73615a86e78ac26 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc: Add AMD Stoney Ridge southbridge codeMarc Jones
Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This is the first of a series of patches to migrate Stoney Ridge support from cpu, northbridge, and southbridge to soc/ Changes: - add soc/amd/stoneyridge and soc/amd/common - remove all other Husdon versions - update include paths, etc - clean up Kconfig and Makefile - create chip.c to contain chip_ops Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 13:21:27 +0000