Age | Commit message (Collapse) | Author |
|
I forgot to remove these in commit 0fe36db154eb ("ACPI: Make FADT
entries for SMI architectural").
Change-Id: Ib1bc1dad6053ddb0454d4510917fd2bcf0901f35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74811
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For AMD, replace name RTC_ALT_CENTURY with RTC_CLK_ALTCENTURY
that points to same offset. Since the century field inside
RTC falls within the NVRAM space, and could interfere with
OPTION_TABLE, it is now guarded with config USE_PC_CMOS_ALTCENTURY.
There were no reference for the use of offset 0x48 for century.
Change-Id: I965a83dc8daaa02ad0935bdde5ca50110adb014a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74601
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I80aa71b813ab8e50801a66556d45ff66804ad349
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74600
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
It is unused. The use of field irq is problematic as it should
appear relative to IOAPIC GSI bases in the devicetree.
Change-Id: I460fd5fde3a7fba5518ccfc153a266d097a95a39
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change IRQ #0 to GSI #2 override to positive edge trigger from
the bus ISA default (positive edge).
Change-Id: I2de941071fca6f7208646a065a271fbf47ac2696
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74354
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Platform needs to implement this to provide information about SCI IRQ
pin and polarity, to be used for filling in ACPI FADT and MADT entries.
Change-Id: Icea7e9ca4abf3997c01617d2f78f25036d85a52f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
After the obsoletion of Processor() it is necessary to provide
_CST package to define P_LVLx IO addresses for C2/C3 transitions.
The latency values from _CST will always replace those in FADT.
Change-Id: I3230be719659fe9cdf9ed6ae73bc91b05093ab97
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Boards with SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID have
special handling for the time being.
Change of aopen/dxplplusu is coupled with sb/intel/i82801dx.
Change of emulation/qemu-i440fx is coupled with intel/i82371eb.
For asus/p2b, this adds MADT LAPIC entries, even though platform
has ACPI_NO_MADT selected. Even previously ACPI_NO_MADT creates
the MADT, including an entry for LAPIC address.
Change-Id: I1f8d7ee9891553742d73a92b55a87c04fa95a132
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Factor out the get_pstate_core_freq function from the SoC's acpi.c files
to both avoid duplication and to also be able to use the same function
in the TSC frequency calculation in a follow-up patch. The family 17h
and 19h SoCs use the same frequency encoding in the P state MSRs while
the family 1Ah SoCs use a different encoding. The family 15h and 16h
SoCs use another encoding, but since this isn't implemented in
Stoneyridge's acpi.c, this will be added in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8619822c2c61e06ae5db86896d5323c9b105b25b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Now that all get_pstate_core_power implementations in each SoC's acpi.c
file is identical, factor it out into a common implementation. This
implementation will also work for Stoneyridge which isn't using the
common P state code yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iba3833024a5e3ca5a47ffb1c1afdbfd884313c96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73997
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since SVI3 has the CPU voltage ID split into two parts, a serial voltage
ID version specific function is needed to get the raw core VID value.
This will allow making get_pstate_core_power common for all AMD CPUs in
a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71ca88c38b307558905a26cce8be1e8ffc5fbed4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73996
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of implementing the conversion from the raw serial voltage ID
value to the voltage in microvolts in every SoC, introduce the
SOC_AMD_COMMON_BLOCK_SVI[2,3] Kconfig options for the SoC to select the
correct version, implement get_uvolts_from_vid for both cases and only
include the selected implementation in the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I344641217e6e4654fd281d434b88e346e0482f57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73995
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Picasso and Cezanne use the serial voltage ID 2 standard to communicate
the CPU voltage to the voltage regulator module on the mainboard, while
Mendocino, Phoenix and Glinda use the serial voltage ID 3 standard for
this. Both standards encode the voltage in a different way, so add the
serial VID version number to the defines to clarify for which version
the define is.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8ddab8df27c86dc2c70a6dfb47908d9405d86240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73994
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The _LO part in the definition names is a leftover from before moving to
the pstate_msr union access to the bitfield elements where it still
mattered if a bit was in the lower of higher half of the MSR. With the
mask-and-shift access to the two parts of the MSR being gone, the _LO
part in the name isn't useful any more and possibly a bit misleading, so
drop that part.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib43c71e946388c944ecf40659d4c12ca02a27a5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73927
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since we already have and use the pstate_msr union in get_pstate_info,
also pass it directly to the get_pstate_core_freq and
get_pstate_core_power function calls avoids having to sort-of convert
the msr_t type parameter in the implementations of those two functions.
In amdblocks/cpu.h a forward declaration of the pstate_msr union is used
since soc/msr.h doesn't exist in the two pre-Zen SoCs that also include
amdblocks/cpu.h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I112030a15211587ccdc949807d1a1d552fe662b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73926
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the pstate_msr union of a bitfield struct and a raw uint64_t to
allow easier access of the bitfields of the P state MSRs which will be
implemented in a following patch. PPR #57254 Rev 1.52 was used as a
reference. This patch adds and uses the cpu_vid_8 bit which is the 9th
bit of the voltage ID specified in the SVI3 spec. The way the CPU
frequency is encoded in the PSTATE MSR has changed compared to Phoenix,
so also update the comment in the SoC's Kconfig file that the selected
SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H is likely incompatible which will be
addressed in the future.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3d1878ce4d9bc62ac597e6f71ef9630491628698
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Assign true/false instead of 1/0 to the valid_freq_divisor bool variable
in get_pstate_core_freq.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92d0eb029c55f80a2027ff6d404c63ed84282750
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The implementations of get_pstate_info of Picasso, Cezanne, Mendocino,
Phoenix and Glinda are identical, so factor it out and move it to the
common AMD SoC code. The SoC-specific get_pstate_core_freq and
get_pstate_core_power functions remain in the SoC-specific code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibe0494f1747f381a75b3dd71a8cc38fdc6dce042
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
With the exception of the generate_cppc_entries call, the
implementations of generate_cpu_entries of Picasso, Cezanne, Mendocino,
Phoenix and Glinda are identical, so factor it out and move it to the
common AMD SoC code. Since all SoCs that support CPPC already select the
SOC_AMD_COMMON_BLOCK_ACPI_CPPC Kconfig option, this can be used to only
call generate_cppc_entries for platforms where it is available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71323d9d071b6f9d82852479b60dc56c24f2b9ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
The actual values in cstate_cfg_table haven't been checked against the
reference code yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5157fc031c5b19d8633132222520f582620208c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the duty_offset and duty_width FADT field in
acpi_fill_fadt for all SoC except Stoneyridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib63b24891d44298841153dfc500b030619e1a5ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the pstate_cnt FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If3ddb466de1d437361d811e45e328a1dbff02fcc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the mon_alrm FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iabb5fc7367f1e4e7acea1a58abdb643fc46ca776
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Instead of adding the P-state number to the PSTATE_0_MSR number to get
the P-state MSR number for the rdmsr call, provide a macro that directly
calculates the MSR number for a given power state. Also drop the unused
PSTATE_[1..4]_MSR definitions which also didn't cover all P-state MSRs
available in the hardware.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If85acf556efe82c209e1608e56c05f7a2a748403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The latency values in the _CST package override the values in the
p_lvl2_lat and p_lvl3_lat FADT fields. In Picasso, Cezanne, Mendocino,
Phoenix and Glinda generate_cpu_entries generates the _CST packages for
each CPU device. The coreboot code for Stoneyridge doesn't generate _CST
packages for the CPU objects, but those are provided via the PSTATE SSDT
binaryPI generates and agesa_write_acpi_tables gets and adds to the ACPI
tables. The AGESA reference code also sets those two FADT entries to the
equivalents of ACPI_FADT_C2_NOT_SUPPORTED and ACPI_FADT_C3_NOT_SUPPORTED
so this also matches the AGESA behavior.
From the ACPI 6.4 spec: "Values provided by the _CST object override
P_LVLx values in P_BLK and P_LVLx_LAT values in the FADT."
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1116a3013576b18b6f521604d6b0a9d75b971e0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iec9cf7c195fa5cb5c8d992aeab400d05cbe801c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use the broadcast ID to deliver LINT1 as NMI to all CPUs,
instead of listing individual LAPIC IDs.
Change-Id: Iaf714d8c2aabd16c59c3bcebc4a207406fc85ca9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Calling setup_ioapic() was only correct for the
IOAPIC routing GSI 0..15 that mimic legacy PIC IRQs.
Change-Id: Ifdacc61b72f461ec6bea334fa06651c09a9695d6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This adds the initial framework for the Glinda SoC, based on what's been
done for Morgana already.
I believe that there's more that can be made common, but that work will
continue as both platforms are developed.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I43d0fdb711c441dc410a14f6bb04b808abefe920
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|