aboutsummaryrefslogtreecommitdiff
path: root/src/soc/amd/common
AgeCommit message (Collapse)Author
2017-09-30soc/amd/common: Add included directoryMarshall Dawson
If the symbol SOC_AMD_COMMON is selected, include the soc/amd/common directory. Until now this has been working due to the directory being included as part of AGESA_INC in vendorcode. That one is still necessary in order to build the AGESA code so it is left in place for now. Change-Id: Ia8191897d2030c475c9268ae86faaf01952c6ace Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-27soc/amd/stoneyridge: Revert CAR teardown wbinvdMarshall Dawson
Change the cache-as-ram teardown to use invd instead of wbinvd. Save the return and recover the call's return address in chipset_teardown_car. CAR teardown had been modified to use wbinvd to send CAR contents to DRAM backing prior to teardown. This allowed CAR variables, stack, and local variables to be preserved while running the AMD_DISABLE_STACK macro. Using the wbinvd instruction has the side effect of sending all dirty cache contents to DRAM and not only our CAR data. This would likely cause corruption, e.g. during S3 resume. Stoney Ridge now uses a postcar stage and this is no longer a requirement. BUG=b:64768556 Change-Id: I8e6bcb3947f508b1db1a42fd0714bba70074837a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20967 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-27soc/amd/stoneyridge: Add postcar stageMarshall Dawson
Insert a postcar stage for Stoney Ridge and move romstage's CAR teardown there. The AMD cache-as-ram teardown procedure currently uses a wbinvd instruction to send CAR contents to DRAM backing. This allows preserving stack contents and CAR globals after the teardown happens, but likely results in memory corruption during S3 resume. Due to the current base of the DCACHE region, reverting to an invd instruction will break the detection mechanism for CAR migrated variables. Using postcar avoids this problem. The current behavior of AGESA is to set up all cores' MTRRs during the AmdInitPost() entry point. This implementation takes control back and causes postcar's _start to clear all settings and set attributes only for the BIOS flash device, TSEG, and enough space below cbmem_top to load and run ramstage. BUG=b:64768556 Change-Id: I1045446655b81b806d75903d75288ab17b5e77d1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-27amd/stoneyridge: Put AGESA heap into cbmemMarshall Dawson
Now that soc/amd supports EARLY_CBMEM_INIT, put the HEAP into cbmem, allowing better control of its cacheability in subsequent patches. This relocates the heap initialization from the common directory into a romstage cbmem hook. The conversion relies on cbmem_add() first searching cbmem for the ID before adding a new entry. Change-Id: I9ff35eefb2a68879ff44c6e29f58635831b19848 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-27soc/amd/common: Clean up GetHeapBase functionMarshall Dawson
Make GetHeapBase a static function. Change the type of return value to a void pointer and remove the unused StdHeader argument. This should be innocuous and will allow a subsequent patch to be simpler. Change-Id: Id4a024d000a514ea9a44f9dfc2caffae9ff01789 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21593 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-26AGESA: Avoid cpuRegisters.h includeKyösti Mälkki
Change-Id: I077677c10508a89a79bcb580249c1310e319aaf1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-28soc/amd: Standardize guards on header filesMartin Roth
The guards in the header files were inconsistent. Some had no leading or trailing underscores, some had one, some had both leading and trailing. Change all to double leading & trailing underscores. Change all comments to have a space before them instead of tabs BUG=b:62235990 Test=Build Kahlee Change-Id: I4466df529ab201c922096a31d7438381778b582f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-14stoneyridge: Rename hudson to southbridgeMarc Jones
Simplify funciton names and remove reference to hudson in stoneyridge. The southbridge in Stoney Ridge is Kern and hudson naming is no longer accurate. BUG=b:62200157 BRANCH=none TEST=Build and booted on Kahlee. Change-Id: Ide7a72dae69b881997101f1e37a1ac739901744d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20912 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27soc/amd/common: Convert to C_ENVIRONMENT_BOOTBLOCKMarshall Dawson
Add dedicated CAR setup and teardown functions and Kconfig options to force their inclusion into the build. The .S files are mostly duplicated code from the old cache_as_ram.inc file. The .S files use global proc names in anticipation for use with the Kconfig symbols C_ENVIRONMENT_BOOTBLOCK and POSTCAR_STAGE. Move the mainboard romstage functionality into the soc directory and change the function name to be compatible with the call from assembly_entry.S. Drop the BIST check like other devices. Move InitReset and InitEarly to bootblock. These AGESA entry points set some default settings, and release/recapture the AP cores. There are currently some early dependencies on InitReset. Future work should include: * Pull the necessary functionality from InitReset into bootblock * Move InitReset and InitEarly to car_stage_entry() and out of bootblock - Add a mechanism for the BSP to give the APs an address to call and skip most of bootblock and verstage (when available) (1) - Reunify BiosCallOuts.c and OemCustomize.c (1) During the InitReset call, the BSP enables the APs by setting core enable bits in F18F0x1DC and APs begin fetching/executing from the reset vector. The BSP waits for all APs to also reach InitReset, where they enter an endless loop. The BSP sends a command to them to execute a HLT instruction and the BSP eventually returns from InitReset. The goal would be to preserve this process but prevent APs from rerunning early code. Change-Id: I811c7ef875b980874f3c4b1f234f969ae5618c44 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-11binaryPI: Define AGESA blob in CBFS as Kconfig stringKyösti Mälkki
Change-Id: I0f78cb275ecad732f81c609564a0640f03d2559e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-07-02soc/amd/common: Add initial support for AMD PSPMarshall Dawson
Add files for supporting the BIOS->PSP communication not covered by AGESA. The first command implemented notifies the PSP that DRAM is ready. This patch also introduces the amd/common/block directory structure similar to intel/common/block. Change-Id: I34b2744b071aa3dfb1071b2aabde32ddb662ab87 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/amd/common: Fix most checkpatch errorsMarshall Dawson
Correct the majority of reported errors and mark most of the remaining ones as todo. Some of the lines requiring a >80 break are indented too much currently. Changes to agesawrapper.c cause the build to change, so this file is also left as-is. Make hex values consistently lower-case. BUG=chrome-os-partner:622407746 Change-Id: I0464f0cafac4ee67edc95d377dcf7aab9a90c66b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27vendorcode/amd: Unify Porting.h across all targetsStefan Reinauer
This requires to also unify the calling convention for AGESA functions from AGESA_STATUS (*agesa_func)(UINT32 Func, UINT32 Data, VOID *ConfigPtr) to AGESA_STATUS (*agesa_func)(UINT32 Func, UINTN Data, VOID *ConfigPtr) On systems running 32bit x86 code this will not make a difference as UINTN is uintptr_t which is 32bit on these machines. Change-Id: I095ec2273c18a9fda11712654e290ebc41b27bd9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-06-26soc/amd/stoneyridge: Add northbridge supportMarc Jones
Copy northbridge files from northbridge/amd/pi/00670F00 to soc/amd/stoneyridge and soc/amd/common. Changes: - update chip_ops and device_ops - remove multi-node support - clean up Kconfig and Makefile Change-Id: Ie86b4d744900f23502068517ece5bcea6c128993 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc/amd/stoneyridge: Add CPU filesMarc Jones
Copy cpu/amd/pi/00670F00 to soc/amd/stoneyridge and soc/amd/common. This is the second patch in the process of converting Stoney Ridge to soc/. Changes: - update Kconfig and Makefiles - update vendorcode/amd for new soc/ path Change-Id: I8b6b1991372c2c6a02709777a73615a86e78ac26 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc: Add AMD Stoney Ridge southbridge codeMarc Jones
Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This is the first of a series of patches to migrate Stoney Ridge support from cpu, northbridge, and southbridge to soc/ Changes: - add soc/amd/stoneyridge and soc/amd/common - remove all other Husdon versions - update include paths, etc - clean up Kconfig and Makefile - create chip.c to contain chip_ops Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-20 17:00:56 +0000