Age | Commit message (Collapse) | Author |
|
espi_poll_status describes better what the function actually does, since
it polls the status register instead of just doing a single read to
check.
Change-Id: I0feeef5504bd911e1fb0a00d4f4c546df3548db2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
It's only an error if bits other than ESPI_STATUS_DNCMD_COMPLETE are set
in the status register. If ESPI_STATUS_DNCMD_COMPLETE isn't set, the
command failed, so we expect that one to be set.
Change-Id: I6f1fb5a59b1ecadd6724a07212626f21fb90e7e7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
When address and data register for the SIO control register access is
passed as one I/O region with a size of 2, the corresponding special
decode enable register should be used instead of a generic one to save
the rather limited generic ones for other decode ranges.
Change-Id: Ie54ff6afa2bd2156f7b3a3cf83091f1f932b6993
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
We can just return at all places where the ret variable was written
before its value gets returned at the end of the function.
Change-Id: Id87f41c0d9e3397879ac3d15b13179cca1a1263f
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Since this is a bit mask applied to the raw value of a 32 bit register,
this should be a 32 bit unsigned type.
Change-Id: I9d9930963d8c827a84dc1f67e2f2fa8f95ab40f2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Th register number passed to the low level read/write functions should
never be negative.
Change-Id: I5d7e117b3badab900d030be8e69ded026d659f8a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
I would like to make assertions evaluate at compile time where possible,
but sometimes people used a literal assert(0) to force an assertion in a
certain code path. We already have BUG() for that so let's just replace
those instances with that.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I674e5f8ec7f5fe8b92b1c7c95d9f9202d422ce32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The Embedded Firmware Structure should contain SPI speed, mode
and Micron support for the PSP to program. Add Kconfig options
to specify these values to use for future platform changes.
BUG=b:158755102
TEST=Test menuconfig and platform build for Trembyle and Mandolin.
Signed-off-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Change-Id: I78558fa3fa27c70820f0f3d636544127adab6f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42567
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BIT(x) needs <types.h>.
Change-Id: Icaeda969cae52d9c62d976db4ead0e734efa838c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:161366241
TEST=Build & boot Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ied7789e9315c75174df9a686c831c5a969ce3bfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Because there was a lot of discussion about the size increase,
I also looked at the impact of calling the get_spi_bar() function
vs reading spi_base directly and just not worring about whether
or not spi_base was already set.
Using the spi_base variable directly is 77 bytes bytes for all 6
functions. it's roughly double the size to call the function at
153 bytes. This was almost entirely due to setting up a call stack.
If we add an assert into each function to make sure that the spi_base
variable is set, it doubles from the size of the function call to
333 bytes.
For my money, the function call is the best bet, because it not only
protects us from using spi_base before it's set, it also gets the
value for us (at least on x86, on the PSP, it still just dies.)
BUG=b:161366241
TEST: Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I0b0d005426ef90f09bf090789acb9d6383f17bd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
'memset' needs <string.h>.
Change-Id: Idc1d72e92c97cd5139ae7439aadb575ef011129a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42342
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previously, the spi base address code was using a number of different
functions in a way that didn't work for use on the PSP.
This patch consolidates all of that to a single saved value that gets
the LPC SPI base address by default on X86, and allows the PSP to set
it to a different value.
BUG=b:159811539
TEST=Build with following patch to set the SPI speed in psp_verstage.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I50d9de269bcb88fbf510056a6216e22a050cae6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43307
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change fixes the definition of `GPIO_INT_ENABLE_STATUS_DELIVERY`
to use `GPIO_INT_ENABLE_DELIVERY` instead of
`GPIO_INT_ENABLE_STATUS_DELIVERY`.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I64d912200779875cf121cec4476fd39de74c0223
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds a macro `PAD_NC` for configuring no-connect pads. This
configures the pad as input with pull-down.
Change-Id: I47c41c88ccfebe2c5dd9a24f85a120af9c8f56b5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Exclude lpc_get_spibase() on the PSP. This also simplifies the
espi_get_bar() function.
BUG=b:159811539
TEST=Build & boot trembyle; Verify address in PSP & x86
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I5927dd40610860b54bb35a7e5b03ddb731597745
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43468
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BIT(x) needs <types.h>
Change-Id: I5dc0d45567ae9879a7e12f2ccc48929d2abc9456
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/msr.h>' -- src/) <(git grep -l 'IA32_EFER\|EFER_\|TSC_MSR\|IA32_\|FEATURE_CONTROL_LOCK_BIT\|FEATURE_ENABLE_VMX\|SMRR_ENABLE\|CPUID_\|SGX_GLOBAL_ENABLE\|PLATFORM_INFO_SET_TDP\|SMBASE_RO_MSR\|MCG_CTL_P\|MCA_BANKS_MASK\|FAST_STRINGS_ENABLE_BIT\|SPEED_STEP_ENABLE_BIT\|ENERGY_POLICY_\|SMRR_PHYSMASK_\|MCA_STATUS_\|VMX_BASIC_HI_DUAL_MONITOR\|MC0_ADDR\|MC0_MISC\|MC0_CTL_MASK\|msr_struct\|msrinit_struct\|soc_msr_read\|soc_msr_write\|rdmsr\|wrmsr\|mca_valid\|mca_over\|mca_uc\|mca_en\|mca_miscv\|mca_addrv\|mca_pcc\|mca_idv\|mca_cecc\|mca_uecc\|mca_defd\|mca_poison\|mca_sublink\|mca_err_code\|mca_err_extcode\|MCA_ERRCODE_\|MCA_BANK_\|MCA_ERRTYPE_\|mca_err_type\|msr_set_bit\|msr_t\|msrinit_t' -- src/) |grep '<'
Change-Id: I45a41e77e5269969280e9f95cfc0effe7f117a40
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41969
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<'
Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Code has evolved such that there seems to be little
use for global definition of cbmem_top_chipset().
Even for AMD we had three different implementations.
Change-Id: I44805aa49eab526b940e57bd51cd1d9ae0377b4b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43326
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SMM_LOCK bit isn't in SMM_MASK_MSR, but in HWCR_MSR, so move it
there. The soc/amd/* code itself uses the bit definition when accessing
HWCR_MSR, so SMM_LOCK was just below the wrong MSR definition.
Also remove SMM_LOCK from comment about masking bits in SMM_MASK_MSR,
since that bit isn't in that MSR.
TEST=Checked the code and the corresponding BKDG/PPR.
Change-Id: I2df446f5a9e11e1e7c8d10256f3c2803b18f9088
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43309
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This isn't needed for psp_verstage, and causes build failures if
included.
BUG=b:158124527
TEST=Build & boot Trembyle with psp_verstage
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I63942ad896d205c327d65bb8083da817b972962b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42808
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We can't set the SMI or SCI flags in psp verstage, so skip them.
TEST=Build
BUG=b:154142138
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I40eb464cde6b233607de1e177702c643ea2b4bb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42765
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2c92280f3bbd80bd7a0d3abfb2fddcef997e144e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
eSPI interrupts are active level high. The eSPI polarity register
in the chipset inverts incoming signals if the corresonding bit
is 0 in the register. Therefore, all active high (edge or level)
virtual wire interrupts need to ensure they are not inverted.
And really the sender of the interrupts should be conforming to the
the eSPI spec. As such inverting any signals should not be necessary,
but this register in the chipset allows for fixing up those misbehaviors.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7346bb0484506d96d7ab2e6d046ffa0571683a48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change clears interrupt and wake status for a pad when
configuring it. This ensures that stale interrupts/wake notifications
are flushed out and do not cause spurious wakes in future suspends.
BUG=b:159944426
Change-Id: Ia4ebd975312a4136f1d0690d7af7372615e31f0f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42877
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`flags` field of soc_amd_gpio structure is set only for SCI and SMI
configurations. This change adds a new helper macro
PAD_CFG_STRUCT_FLAGS that allows setting of all soc_amd_gpio members
including `flags` field. This can be used directly by PAD_SCI and
PAD_SMI. For all other pad configurations, PAD_CFG_STRUCT macro uses
PAD_CFG_STRUCT_FLAGS with flags set to 0. This allows dropping of
redundant parameter 0 for flags for all other pad configurations.
BUG=b:159944426
Change-Id: I835b62f5502375ffc4215548b51338a67546d699
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42876
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
configuration table
Currently, for Stoneyridge and Picasso mainboards, pads that are
configured for SCI/SMI/WAKE need to have multiple entries in the
configuration table - one for PAD_GPI and other for the special
configuration that is required. This requires a very specific ordering
of pads within the table and is prone to errors because of conflicting
params provided to the different entries for the same pad. This also
does not work very well with the concept of override GPIOs where the
entry in base table is overridden with the first matched entry from
the override table.
This change updates the way GPIO configuration is handled for special
routing like SCI/SMI/WAKE/DEBOUNCE by setting the control field of
soc_amd_gpio structure in the macros performing these
configurations. Also, program_gpios() is updated to perform a write to
GPIO control register instead of read-modify-write. This is because
mainboard is expected to provide only a single configuration entry for
each pad within a given table. Thus, there is no need to preserve
earlier configuration.
Mainboards that were providing multiple entries for a single pad are
updated accordingly.
BUG=b:159944426
Change-Id: I3364dc2982d66c4e33c2b4e6b0b97641ebea27f0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some codepaths want to set selected bits of a hardware register
to match those of a given variable in memory. Provide a helper
function for this purpose and use it in gpio_set(),
gpio_input_pulldown() and gpio_input_pullup().
This change also adds GPIO_PULL_MASK and updates GPIO_OUTPUT_MASK to
include all bits dealing with pull and output respectively.
Change-Id: I4413d113dff550900348a44f71b949b7547a9cfc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds helper macro PAD_CFG_STRUCT for setting the fields
of `soc_amd_gpio`. Additionally, macros are added for different
operations i.e. pull, output, trigger, int_enable, event_trigger,
wake_enable, debounce, etc. All GPIO configuration macros are updated
to use PAD_CFG_STRUCT instead of setting the fields directly.
BUG=b:159944426
Change-Id: I03535d2da0c05f72c4163fa30d72f9c6df44908b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42872
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:157984427
TEST=check value of PMx054
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I2ca14c137ed784a1a7cfeed969719f46fc8230f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change updates the macros for GPIO debounce to add _DEB_ in the
name. This is done to make the names consistent with rest of the GPIO
control field names.
BUG=b:159944426
Change-Id: Ic47678108c871c5f1cd0d512783230f18adf3484
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42871
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change renames GPIO macros as follows:
1. Pad filtering macros are renamed to GPIO_TRIGGER_ and
GPIO_ACTIVE_. This determines the filtering applied on the input
signal at the pad.
2. Interrupt enabling macros are renamed to GPIO_INT_ENABLE_.
_INT_ is dropped from pad filtering macros because the filtering
applies to the input signal irrespective of how it is routed. It is
applied at the pad not only for GPIO interrupts but also for other
routes i.e. SCI, SMI, etc.
BUG=b:159944426
Change-Id: Id0ad770be77409aaaae4cc135945e2815ce97030
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42870
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`soc_amd_gpio` structure uses a flag field to store additional
information about GPIO configuration that does not end up directly in
the GPIO control register. However, the naming for these flags is not
consistent across event triggers and special configurations. This
change updates the flag names to be consistent (starting with
GPIO_FLAG_*) and adds some helper functions for GPIO events.
In the following CLs, more changes will be made to drop some of the
special flags which are not really required.
BUG=b:159944426
Change-Id: Idca795c3e594eb956d297d5ba5d08f75b5563ee5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42869
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops unused macro GPIO_TRIGGER_VALID from gpio_banks.h.
BUG=b:159944426
Change-Id: Ie115f37893d9ba190bab56cf8b037febd8b5f4b5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Bring all GNVS related initialisation function to global
scope to force identical signatures. Followup work is
likely to remove some as duplicates.
Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib2c7cd70ab38d0d8e745b0a611b780d2b0b8dc5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
There is no GPIO_63 but the register position is used for
interrupt controls.
Change-Id: I754a2f6bbee12d637f8c99a9d330ab0ac8187247
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42686
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The banks are one after each other in the ACPIMMIO space. Also
there is space for more banks and existing ASL takes advantage
of the property.
Change-Id: Ib78559a60b5c20d53a60e1726ee2aad1f38f78ce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42522
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Future implementation of verstage running on PSP will have access
to some of the ACPIMMIO banks, but banks will be mapped runtime
at non-deterministic addresses. Provide preprocessor helpers to
accomplish this.
Change-Id: I8d50de60bb1ea1b3a521ab535a5637c4de8c3559
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Using proper symbols for base addresses, it is possible to
only define the symbols for base addresses implemented for
the specific platform and executing stage.
Change-Id: Ib8599ee93bfb1c2d6d9b4accfca1ebbefe758e09
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This reverts commit 4883252912665f56c8e7801fe03a26594a1e9d5d.
Almost everything in <amdblocks/acpimmio_map.h> is invalid for PSP as
it does not have the same view of memory space.
The prototypes xx_set/get_bar() are only valid for PSP as x86 cores
will use the constant mapping defined in <amdblocks/acpimmio_map.h>
The selected MMIO base address model depends of the architecture the
stage is built for and, to current knowledge, nothing else. So
the guards should have been with ENV_X86 vs ENV_ARM and not about
CONFIG(VERSTAGE_BEFORE_BOOTBLOCK).
For the ENV_ARM stage builds, <arch/io.h> file referenced in the
previously added mmio_util_psp.c file has not been added to the tree.
So there was some out-of-order submitting, which did not get caught
as the build-testing of mixed-arch stages has not been incorporated
into the tree yet.
The previously added file mmio_util_psp.c is also 90% redundant with
mmio_util.c.
Change-Id: I1d632f52745bc6cd3c3dbddb1ea5ff9ba962c2e8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42486
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The assumption up to this point was that if the system had an x86
processor, verstage would be running on the x86 processor. With running
verstage on the PSP, that assumption no longer holds true, so exclude
pieces of code that cause problems for verstage on the PSP.
This change will add these files to verstage only if the verstage
architecture is X86 - either 32 or 64 bit.
BUG=b:158124527
TEST=Build and boot on Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I797b67394825172bd44ad1ee693a0c509289486b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42062
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most LAPIC registers are 32bit, and thus the use of long is valid on
x86_32, however it doesn't work on x86_64.
* Don't use long as it is 64bit on x86_64, which breaks interrupts
in QEMU and thus SeaBIOS wouldn't time out the boot menu
* Get rid of unused defines
* Get rid of unused atomic xchg code
Tested on QEMU Q35 with x86_64 enabled: Interrupts work again.
Tested on QEMU Q35 with x86_32 enabled: Interrupts are still working.
Tested on Lenovo T410 with x86_64 enabled.
Change-Id: Iaed1ad956d090625c7bb5cd9cf55cbae16dd82bd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36777
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because the PSP maps the MMIO addresses that are used to non-
deterministic addresses, the accesses need to be able to find
the address at runtime.
BUG=b:158124527
TEST=Build & boot with Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I68305e0f31956c57bfdee42025bdfe938703e82d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42061
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie004a94a49fc8f53c370412bee1c3e7eacbf8beb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The existing define for SPI_FIFO_DEPTH looked a bit suspicious, but
turned out to be correct.
Change-Id: I91e65d922673f5c451a336ae013cb75f87a3fc98
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<types.h> is supposed to provide <commonlib/bsd/cb_err.h>,
<stdbool.h>,<stdint.h> and <stddef.h>. So remove those includes
each time when <types.h> is included.
Change-Id: I886f02255099f3005852a2e6095b21ca86a940ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: If8c7e26ebd954b19bfb8766b26570c6865ad255e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41676
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I54eda3d51ecda77309841e598f06eb9cea3babc1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I57e064d26b215743a1cb06bb6605fc4fe1160876
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41491
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also, replace 'lapic.h' by 'lapic_def.h' in 'soc/intel/braswell/northcluster.c'.
Change-Id: I71cff43d53660dc1e5a760ac3034bcf75f93c6e7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41489
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function adds support for gpio_configure_pads_with_override
which:
1. Takes as input two GPIO tables -- base config table and override
config table
2. Configures each pad in base config by first checking if there is a
config available for the pad in override config table. If yes, then
uses the one from override config table. Else, uses the base config to
configure the pad.
BUG=b:153456574
TEST=Build and boot dalboz
BRANCH=none
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I07bfe82827d1f7aea9fcc96574d6deab9e91d503
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153423
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41576
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function espi_setup() which allows SoCs to
configure connection to slave. Most of the configuration is dependent
upon mainboard settings in espi_config done as part of the device
tree. The general flow for setup involves the following steps:
1. Set initial configuration (lowest operating frequency and single mode).
2. Perform in-band reset and set initial configuration since the
settings would be lost by the reset.
3. Read slave capabilities.
4. Set slave configuration based on mainboard settings.
5. Perform eSPI host controller configuration to match the slave
configuration and set polarities for VW interrupts.
6. Perform VW channel setup and deassert PLTRST#.
7. Perform peripheral channel setup.
8. Perform OOB channel setup.
9. Perform flash channel setup.
10. Enable subtractive decoding if requested by mainboard.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I872ec09cd92e9bb53f22e38d2773f3491355279e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41272
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CB:41194 got rid of "this file is part of" lines. However, there are
some changes that landed right around the same time including those
lines. This change uses the following command to drop the lines from
new files:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ic3c1d717416f6b7e946f84748e2b260552c06a1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41342
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:147042464
TEST=Build trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5df618f69a7dcca47b9733efb3699b37fd171e90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41261
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
fch_spi_ctrl.c uses read*()/write*() functions which are declared in
arch/mmio.h. This change includes the file arch/mmio.h in
fch_spi_ctrl.c.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I6540004512af1f59f5fb300a3a4818b87ad94bfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change adds a helper function lpc_early_init() which does the
following things:
1. Enables LPC controller
2. Disables any LPC decodes (These can be set up later by SoC or
mainboard as required).
3. Sets SPI base so that MMIO base for SPI and eSPI controllers is
initialized.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I016f29339466c3fee92fe9b62a13d72297c29b8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change updates lpc_enable_children_resources() to configure IO
and MMIO resources differently depending upon whether the mainboard
wants to setup decode windows for LPC or eSPI.
BUG=b:154445472,b:153675913
Change-Id: Ie8803e934f39388aeb6e3cbd7157664cb357ab23
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change provides a helper function espi_update_static_bar() that
informs the eSPI common driver about the static BAR to use for eSPI
controller instead of reading the SPIBASE. This is required to support
the case of verstage running on PSP.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1f11bb2e29ea0acd71ba6984e42573cfe914e5d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change adds the following helper functions for eSPI decode:
1. espi_open_io_window() - Open generic IO window decoded by eSPI
2. espi_open_mmio_window() - Open generic MMIO window decoded by eSPI
3. espi_configure_decodes() - Configures standard and generic I/O
windows using the espi configuration provided by mainboard in device tree.
BUG=b:153675913,b:154445472
Change-Id: Idb49ef0477280eb46ecad65131d4cd7357618941
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41073
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds eSPI register definitions for I/O and MMIO decode
using eSPI on AMD SoCs. Additionally, it also adds a macro to define
the offset of ESPI MMIO base from SPI MMIO base.
BUG=b:153675913
Change-Id: Ifb70ae0c63cc823334a1d851faf4dda6d1c1fc1a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
decodes
This change sets LPC_IO_PORT_DECODE_ENABLE to 0 as part of
lpc_disable_decodes() to ensure that the I/O port decodes are also disabled.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1474f561997f2ee1231bd0fcaab4d4d4e98ff923
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds support for following SPI configuration functions to
common block SPI driver and exposes them to be used by SoC:
1. fch_spi_early_init(): Sets up SPI ROM base, enables SPI ROM,
enables prefetching, disables 4dw burst mode and sets SPI speed and mode.
2. fch_spi_config_modes(): This allows SoC to configure SPI speed and
mode. It uses SPI settings from soc_amd_common_config to configure the
speed and mode.
These functions expect SoC to include soc_amd_common_config in SoC
chip config and mainboard to configure these settings in device tree.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia4f231bab69e8450005dd6abe7a8e014d5eb7261
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41248
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change splits lpc_set_spibase() into two separate functions:
lpc_set_spibase() - Sets MMIO base address for SPI controller and eSPI
controller (if supported by platforms)
lpc_enable_spi_rom() - Enables SPI ROM
This split is done to allow setting of MMIO base independent of ROM
enable bits. On platforms like Picasso, eSPI base is determined by the
same register and hence eSPI can set the BAR without having to touch
the enable bits.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3f270ba1745b4bb8a403f00cd069a02e21d444be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change adds support for struct soc_amd_common_config that allows
multiple AMD SoCs to share common configuration. This can then be used
by common/block drivers to get the required configuration from device
tree. It also provides function declaration for
soc_get_common_config() that needs to be provided by SoCs making use
of the common configuration structure.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Idb0d797525414c99894a8e4ede65469381db7794
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41246
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves all the logic for setting up decode windows for LPC
under configure_child_lpc_windows() which is called from
lpc_enable_children_resources(). This is in preparation to configure
decode windows for eSPI differently if mainboard decides to use eSPI
instead of LPC.
Side-effect of this change is that the IO decode registers are written
after each child device resources are considered.
BUG=b:154445472
Change-Id: Ib8275bc4ce51cd8afd390901ac723ce71c7a9148
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41070
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
eSPI on Picasso is configured using the LPC bridge configuration
registers. This change enables config options to allow SoC to select
if it supports eSPI (SOC_AMD_COMMON_BLOCK_HAS_ESPI) and mainboard to
select if it wants to use eSPI instead of LPC for talking to legacy
devices and embedded controllers (SOC_AMD_COMMON_BLOCK_USE_ESPI).
BUG=b:154445472
Change-Id: I15e9eb25706e09393c019eea4d61b66f17490be6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41069
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
AMD common block LPC driver does not really need a custom ops_pci
structure. This change drops the lops_pci and instead set .ops_pci to
the default pci_dev_ops_pci.
BUG=b:154445472
Change-Id: Ia06eed04097739c3e21dc13e056a2120ff5eb382
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
If a Picasso platform wants to use GPIO 67 it must disable ROM sharing.
Otherwise ROM access is incredibly slow.
BUG=b:153502861
TEST=Build trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia9ab3803a2f56f68c1164bd241fc3917a3ffcf2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change moves all ACPI table support in coreboot currently living
under arch/x86 into common code to make it architecture
independent. ACPI table generation is not really tied to any
architecture and hence it makes sense to move this to its own
directory.
In order to make it easier to review, this change is being split into
multiple CLs. This is change 3/5 which basically is generated by
running the following command:
$ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g'
BUG=b:155428745
Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
BUG=none
TEST=Made sure trembyle builds
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I9df70fd5c41a9a68edc7be3c2e920c4dc94d5af9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40871
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
sm.c requires acpimmio_map.h for ACPIMMIO_* macros. This change
includes acpimmio_map.h in sm.c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia049254fa389a76bcf6538c0449229b4d856086e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40821
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support in common block HDA driver to add a PCI
device for HDA in SSDT and removes the HDA device from DSDT for
Stoneyridge and Picasso.
_INI method is still retained in stoneyridge since I am unsure why it
was added. In order to support the _INI method, HDA driver makes a
callback hda_soc_ssdt_quirks() to allow SoCs to add any quirks
required for the HDA device. This callback is implemented by
Stoneyridge to provide the _INI method which retains the same
functionality for HDA device.
This makes it easier to ensure that we don't accidentally
make the DSDT and SSDT entries inconsistent w.r.t. ACPI name and
scope.
BUG=b:153858769,b:155132752
TEST=Verified that audio still works fine on Trembyle.
Change-Id: I89dc46b92fdcb785bd37e18f0456935c0e57eff5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40785
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds .acpi_name() callback to HDA driver that returns
"AZHD" as the ACPI device name for HDA controller. Since this is now
done by the common HDA driver, this change also removes the HDA device
name returned by stoneyridge in chip.c.
BUG=b:153858769
Change-Id: I89eaa799518572f3c46c7ce9ef8dd3f85daa12bb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40781
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a cosmetic change to use tabs to align hda_audio_ops and
hdaaudio_driver entries.
Change-Id: I8e398706cbe7087d0178b2433606f8984651c0d6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40780
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change sets ops_pci for hda_audio_ops to default pci_dev_ops_pci
and removes the custom lops_pci since the driver does not really need
a custom ops_pci.
BUG=b:153858769
Change-Id: I4b46e22ef556c0f49152c41a07f3c54c513ae37a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40779
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCI device PCI_DEVICE_ID_AMD_FAM17H_HDA0 does not really use the same
vendor ID as PCI_VENDOR_ID_AMD. Thus, drop this device from the list
of pci_device_ids[] that are supported by the common hda driver.
BUG=b:153858769
Change-Id: If41dc7179e1e5b476878ee24c8a355b1cde762eb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40778
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change sets .ops_pci for sata device_operations to default
pci_dev_ops_pci. It is required to set the subsystem IDs making the
behavior consistent with default_pci_ops_dev.
BUG=b:153858769
Change-Id: I695ac8961c92a3061beca890f5d47413b251e22b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40777
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables the use of AMD common block SATA driver for
Picasso. Since the common driver provides ACPI device name and PCI
device for SATA in SSDT, these are removed from picasso chip.c and
sb_pci0_fch.asl.
BUG=b:153858769
TEST=Verified that "STCR" device is correctly reported on trembyle in
SSDT.
Change-Id: Icfdcf9f5e08820b565aa9fcdd0cdc7b5c9eadcd5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40770
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support in common block SATA driver to add a PCI
device for SATA in SSDT and removes the SATA device from DSDT.
This makes it easier to ensure that we don't accidentally
make the DSDT and SSDT entries inconsistent w.r.t. ACPI name and
scope.
BUG=b:153858769
Change-Id: I16ac36d997496ff33c5b44ec9bd2731b2b8799eb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40769
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds .acpi_name() callback to SATA driver that returns
"STCR" as the ACPI device name for SATA. Since this is now done by the
common SATA driver, this change also removes the SATA device name
returned by stoneyridge in chip.c.
BUG=b:153858769
Change-Id: I5e0998be3016febbb3b0e91940750a38edb6a9e7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40768
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a cosmetic change to use tabs to align sata_ops and
sata0_driver entries.
Change-Id: Ia9eabd0cd64ecc9cbff0d4c3e3c6b71bbf29e3a9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40767
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
sata.c was being added to ramstage based on the selection of
CONFIG_SOC_AMD_COMMON_BLOCK_HDA which is not correct. This change
fixes the error by including sata.c based on selection of
CONFIG_SOC_AMD_COMMON_BLOCK_SATA.
BUG=b:153858769
Change-Id: I5d23e5817872ddbb3d8d4f7dcabbaafcee4d51f4
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40766
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change:
1. Adds PCI device for graphics controller in ACPI SSDT tables using
acpi_device_write_pci_dev().
2. Gets rid of IGFX device from picasso acpi/northbridge.asl.
This makes it easier to ensure that we don't accidentally
make the DSDT and SSDT entries inconsistent w.r.t. ACPI name and
scope.
BUG=b:153858769
Change-Id: I3a967cdc43b74f786e645d3fb666506070851a99
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change selects common block graphics driver for Picasso and also
adds PCI ID for Family 17h graphics controller to the graphics
driver.
Since the common driver provides .acpi_name() callback for graphics
device, soc_acpi_name() no longer needs to provide the ACPI name for
graphics device.
BUG=b:153858769
Change-Id: Id3ffcb05d8f8a253a0b27407d52d7907c507cabb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change adds a common graphics block device driver for AMD
SoCs. In follow-up CLs, this driver will be utilized for Picasso.
This driver is added to enable ACPI name and SSDT generation for
graphics controller.
BUG=b:153858769
Change-Id: I45e2b98fede41e49158d9ff9f93785a34c392c22
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change adds all the missing PCI device IDs for AMD Family
17h. IDs that were already present are updated to include _FAM17H_ in
the name instead of _PCO_ and _DALI_. This ensures that the PCI IDs
match the family and models as per the PPR. In cases where the
controller is present only on certain models, _MODEL##H_ is also
included in the name.
BUG=b:153858769
BRANCH=None
TEST=Verified that trembyle and dalboz still build.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia767d32ec22f5e58827e7531c0d3d3bac90d3425
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
IOMMU for AMD Family 17h Model 10-20h uses the same PCI device ID
0x15D1. This change updates the name to indicate that the PCI device
ID is supported for FP5(Model 18h) and FT5(Model 20h).
BUG=b:153858769
BRANCH=None
TEST=Trembyle and dalboz still build.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I17c782000ed525075a3e438ed820a22d9af61a26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
I2C0&1 are either not available or not functional. Add place holders
instead, so that the array index matches the I2C controller number. I2C4
is slave device only, so do not initialize it as I2C host controller.
Also do some slight refactoring.
BUG=b:153152871
BUG=b:153675916
Change-Id: I397b074ef9c14bf6a4f6680696582f5173a5d0d3
Signed-off-by: Martin Roth <martinroth@chromium.org>
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1897071
Reviewed-on: https://chromium-review.googlesource.com/2057468
Reviewed-on: https://chromium-review.googlesource.com/2094855
Reviewed-on: https://chromium-review.googlesource.com/2149870
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40247
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib45e93faebc2d24389f8739911419dfec437bd59
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
psp_print_cmd_status only needs data from the mbox buffer header and not
the whole buffer. This avoids type casts when the buffer type isn't
mbox_default_buffer.
BUG=b:153677737
Change-Id: I8688b66fefe89fc4f3ce2207d4360ceb2dbaef12
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40412
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the command to tell the PSP the system is going to a sleep
state.
BUG=b:153677737
Change-Id: I50da358e1f8438b46dbb1bda593becf6dd4549ea
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/2020367
Reviewed-on: https://chromium-review.googlesource.com/2110764
Reviewed-on: https://chromium-review.googlesource.com/2121159
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Implement the MboxBiosCmdSmmInfo function to inform the PSP of the SoC's
SMM configuration. Once the BootDone command is sent, the PSP only
responds to commands where the buffer is in SMM memory.
Set aside a region for the core-to-PSP command buffer and the
PSP-to-core mailbox. Also add an SMM flag, which the PSP expects to read
as non-zero during an SMI.
Add calls to soc functions for the soc to populate the trigger info and
register info (v2 only).
Add functions to set up the structures needed for the SmmInfo function
in Picasso support. Issue a SW SMI, and add a new handler to call the
new PSP function.
BUG=b:153677737
Change-Id: I10088a53e786db788740e4b388650641339dae75
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:153677737
Change-Id: I5b017dfc92563ec4f0a2edb24416d6b65587d9a3
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This function is only needed and valid for the 1st generation PSP
interface used on stoneyridge.
BUG=b:153677737
Change-Id: Ia1be09c32271fe9480a0acbe324c4a45d8620882
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Family 17h redefines the PSP command and status, and therefore the
steps required to send commands via the mailbox. Convert the existing
version into a v1 and add a v2. New Kconfig options allow the soc to
choose v1 vs. v2.
The v2 PSP begins responding to the mailbox command when the full
bit range is written. Define the new mailbox as a union of a u32
and a structure.
Additional PSP details may be found in the NDA publication (#55758)
AMD Platform Security Processor BIOS Architecture Design Guide for
AMD Family 17h Processors
Change the existing two soc functions that return pointers to void
pointers.
BUG=b:153677737
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d358fdae07da471640856f57568059e9487f6a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
`.read_resources` and `.set_resources` are the only two device
operations that are considered mandatory. Other function pointers
can be left NULL. Having dedicated no-op implementations for the
two mandatory fields should stop the leaking of no-op pointers to
other fields.
Change-Id: I6469a7568dc24317c95e238749d878e798b0a362
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40207
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I22fffa0eab006be2bad4d3dd776b22ad9830faef
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|