summaryrefslogtreecommitdiff
path: root/src/soc/amd/cezanne
AgeCommit message (Collapse)Author
2022-02-07soc/amd/cezanne: Add the fw SPL to fw.cfgZheng Bao
SPL: Security Patch Level The data in SPL is used for FW anti-rollback, preventing rollback of platform level firmware to older version that are deemed vulnerable from a security point of view. BUG=b:216096562 Change-Id: I0aa456b8b4eec506fbb319293f0903b293325cb0 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-05cpu/x86/lapic: Move LAPIC configuration to MP initKyösti Mälkki
Implementation for setup_lapic() did two things -- call enable_lapic() and virtual_wire_mode_init(). In PARALLEL_MP case enable_lapic() was redundant as it was already executed prior to initialize_cpu() call. For the !PARALLEL_MP case enable_lapic() is added to AP CPUs. Change-Id: I5caf94315776a499e9cf8f007251b61f51292dc5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-02-03soc/amd/*/i2c: factor out common I2C pad configurationFelix Held
The I2C pad control registers of Picasso and Cezanne are identical and the one of Sabrina is a superset of it, so factor out the functionality. To avoid having devicetree settings that contain raw register bits, the i2c_pad_control struct is introduced and used. The old Picasso code for this had the RX level hard-coded for 3.3V I2C interfaces, so keep it this way in this patch but add a TODO for future improvements. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1d70329644b68be3c4a1602f748e09db20cf6de1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-03soc/amd/*/i2c: introduce and use MISC_I2C_PAD_CTRL(bus) macroFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9d098a55a5c6f6e022c3896750c752e2759e101b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-03soc/amd/*/i2c: drop unused mainboard_i2c_overrideFelix Held
No mainboard in the current tree implements mainboard_i2c_override. In a follow-up commit the i2c_pad_control struct is introduced to be able to make more parameters controllable by devicetree settings in the future. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8f9ed5d50d26e4623dc5888cc8af090fdd00fc03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61566 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-02soc/amd/cezanne: Rename PSP_POSTCODES_ON_ESPI to PSP_INIT_ESPIRaul E Rangel
This flag only controls eSPI init in the PSP Stage 2 Boot Loader. It doesn't control if port 80s are written. This flag also doesn't currently control LPC init. The PSP is currently hard coded to remove any LPC init. BUG=b:215425753 TEST=build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idf3f0dcc216df2fd15b016f9458a208b7e15c720 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61534 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-02soc/amd/cezanne,vc/cezanne: Implement svc_write_postcodeRaul E Rangel
This will allow verstage to write post codes. BUG=b:215425753 TEST=Boot guybrush and verify PSP post codes are printed 22-01-31 15:12:03.214 (S3->S0) 22-01-31 15:12:03.214 03 04 0f 0e f0 f1 f2 01 10 a0 a2 <--new Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6ceee8fcb094f462de99c07aef8e96425d9c3270 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61522 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-01psp_verstage: report developer mode to PSPKangheui Won
Add platform_report_mode function which report current developer mode status to the PSP. L1 widevine app in the PSP will use this information to select key box. BUG=b:211058864 TEST=build and boot guybrush TEST=build picasso chrome os boards Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I04b5fcfa338b485b36f1b946203f32823385c0b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-02-01psp_verstage: add new svc for cezanneKangheui Won
Add svc_set_platform_bootmode svc to cezanne. PSP will use this information to select proper widevine keybox. BUG=b:211058864 TEST=build guybrush Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I6bcc9e49a2b73d486cfecd7b240bf989cad94630 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-01-26src: Add missing 'void' in function definitionElyes HAOUAS
Change-Id: I7fa1f9402b177a036f08bf99c98a6191c35fa0b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-26soc/amd/cezanne,picasso,sabrina: factor out get_threads_per_coreFelix Held
This code is common to at least all Zen-based APUs (Picasso, Cezanne, Sabrina) and is also useful outside of the SoC-specific dynamic ACPI table generation code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie96d4429fb6ed9223efed9b3c754e04052d7ca7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-by: Eric Peers <epeers@google.com>
2022-01-25soc/amd/cezanne: FSP: Add UPD entry for eDP tuningZheng Bao
The FSP gets these values from the UPD and sets the internal values. The document about eDP tuning is attached in issue tracker of this ticket, at the issue tracker b/203061533#comment6. BUG=b:203061533 Cq-Depend: chrome-internal:4303901 Change-Id: I9b85faac4f2fa1fb2c14bb85b615346d4379baac Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-25soc/amd/cezanne: Increase PRERAM_CBMEM_CONSOLE_SIZE to 0x2000Raul E Rangel
Let's increase this to avoid losing any logs. BUG=b:213828947 TEST=Boot guybrush and no longer see *** Pre-CBMEM romstage console overflowed, log truncated! Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3258145e352af3a75893c7cc96f36eb238c99abb Reviewed-on: https://review.coreboot.org/c/coreboot/+/61100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-23soc/amd/{common,cezanne,picasso}: Add PRE_X86_CBMEM_CONSOLE_SIZERaul E Rangel
This change splits the size of the console transfer region and size of the bootblock/romstage Pre-RAM console region. This allows having a larger Pre-RAM console while not impacting the size of the PSP verstage console. Instead of directly using the PRE_X86_CBMEM_CONSOLE_SIZE symbol in `setup_cbmem_console`, I chose to use the offsets provided in the transfer buffer. It would be nice to eventually do this for all the fields in the transfer buffer. BUG=b:213828947 TEST=Boot guybrush and verify verstage logs are no longer truncated Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8b8cc46600192a7db00f5c1f24c3c8304c4db31d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-20soc/amd/cezanne,picasso: factor out common early non-car cache setupFelix Held
This implementation is the same for all SoC that select SOC_AMD_COMMON_BLOCK_NONCAR, so factor it out to the common AMD non-CAR CPU support code folder. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I53528f0bb75e9d945740ad5065c75e7de7b5878f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61257 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-20soc/amd/cezanne/include/espi.h: add missing include guardsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I393feab8550a7124ab2982ff3d256e3491d27b4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-01-18soc/amd/{picasso,cezanne}: Enable CBMEM_PRINT_PRE_BOOTBLOCK_CONTENTSRaul E Rangel
This will help debugging verstage failures. BUG=b:213828947 TEST=Boot guybrush and verify verstage logs are printed before bootblock messages. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia60991b3e81c19c24ceb69193840dde873ef3346 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-01-14soc/amd/cezanne: factor out eSPI SPI2 pads configuration functionsFelix Held
verstage_mainboard_espi_init in mb/guybrush/verstage.c still accesses some of the registers directly. BUG=b:183149183 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2f48d1c62b48866d8d942f1586bcb72017b8dd72 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-01-13soc/amd/*/chip.h: add missing gpio.h includeFelix Held
Since we need the GPIO defines in the devicetree settings, include gpio.h in each SoC's chip.h file which will indirectly include the soc-specific soc/gpio.h header instead of having it indirectly included via soc/i2c.h. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id26721a6b8ae94784d4a90d7ccac28fef2be36dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/60977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2022-01-11soc/amd/cezanne/include/i2c: add missing types.h includeFelix Held
uintptr_t is defined in stdint.h which gets included by types.h. I use types.h instead of stdint.h, since that's also what the Picasso code does. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id3d0811d831b5acc9343398f4d28c73467c0a429 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-11soc/amd/cezanne/include/i2c: move include inside header guardFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a8c21c462258c8a419ccc3f2db50f74a154e465 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-10src/soc/amd: Remove unused <console/console.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<" Change-Id: Iff7fdd679ac31a121d56746ed8efa1b3da932638 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-20soc/amd/cezanne: Correct S0i3 verstage softfuse bitRob Barnes
PSP_S0I3_RESUME_VERSTAGE softfuse bit is 58, not 40. BUG=b:202397678 BRANCH=None TEST=Boot guybrush, ensure S0i3 verstage runs with latest PSP. Change-Id: Ia27f6e48e345aac0d5f6579d663a6b655688239a Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-20soc/amd/cezanne/fch: disable 48MHz output in S0i3Felix Held
S0i3 is a low power state which reduces the power consumption to about the level of the S3 suspend state where the DRAM is kept in a self- refresh state and most of the rest of the system is powered down. So everything that can be switched off in the S0i3 state should be switched off in order to maximize the standby time. BUG=b:210722314 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If445f5825dc7b795c95d73c061156cc485421ada Reviewed-on: https://review.coreboot.org/c/coreboot/+/60125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-18soc/amd/cezanne/acpi: Add support for RTC workaroundRaul E Rangel
The RTC on Cezanne is an unstable wake source when the system is in S0i3. We instead need to use an internal timer that triggers a GPIO that acts as a wake source. This change provides the ACPI necessary to allow the OS to manage the wake source. BUG=b:209705576 TEST=Boot guybrush with this patch and several OS patches. Verified the OS sets the correct wake bit, the system correctly suspends and resumes, and the wake source is correctly accounted for. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1f14d14df5d30d48d244416f2ec8c10ac5c8040e Reviewed-on: https://review.coreboot.org/c/coreboot/+/60172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-14soc/amd/{cezanne,common}: Add PSP_S0I3_RESUME_VERSTAGE Kconfig optionRob Barnes
Add PSP_S0I3_RESUME_VERSTAGE Kconfig option. When enabled, verstage will be run in PSP during S0i3 resume. Setting softfuse bit 40 enables this in PSP. BUG=b:200578885, b:202397678 BRANCH=None TEST=Verstage runs during s0i3 resume on Nipperkin Change-Id: I2c185f787c1e77bd09f6cbbb1f47deb665ed0c79 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-13soc/amd/cezanne: Don't select CPU_INFO_V2 explicitlyNico Huber
It's already implied by PARALLEL_MP now. Change-Id: Ia76f1a925b2c0ebbba0bf20b094e716708d540c2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-08soc/amd/{cezanne,picasso,stoney,common}: Don't clear PM1 on resumeRaul E Rangel
According to https://uefi.org/specs/ACPI/6.4/04_ACPI_Hardware_Specification/ACPI_Hardware_Specification.html#pm1-event-grouping > For ACPI/legacy systems, when transitioning from the legacy to the G0 > working state this register is cleared by platform firmware prior to > setting the SCI_EN bit (and thus passing control to OSPM). For ACPI > only platforms (where SCI_EN is always set), when transitioning from > either the mechanical off (G3) or soft-off state to the G0 working > state this register is cleared prior to entering the G0 working state. This means we don't want to clear the PM1 register on resume. By clearing it the linux kernel can't correctly increment the wake count when the power button is pressed. The AMD platforms implement the _SWS ACPI methods, but the linux kernel doesn't actually use these methods. BUG=b:172021431 TEST=suspend zork and push power button and verify power button wake_count increments. Verified other wake sources still work. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iaa886540d90f4751d14837c1485ef50ceca48561 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-08soc/amd/{cezanne,picasso,stoney}: Clear PM/GPE when enabling ACPIRaul E Rangel
According to https://uefi.org/specs/ACPI/6.4/16_Waking_and_Sleeping/sleeping-states.html?highlight=power%20states# > For ACPI/legacy systems, when transitioning from the legacy to the G0 > working state this register is cleared by platform firmware prior to > setting the SCI_EN bit. This change makes sure we clear the PM/GPE blocks are cleared before enabling the SCI_EN bit. BUG=b:172021431 TEST=Boot guybrush and morphius to OS and verify suspend resume still works. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Icc6f542185dc520f8d181423961b74481c0b5506 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-03soc/amd/cezanne: Enable secure countersKarthikeyan Ramasubramanian
Guybrush uses secure counters to protect against High Definition (HD) protected content rollback. These secure counters are hosted in TPM NVRAM. Enable secure counters so that they are defined in PSP verstage. BUG=b:205261728 TEST=Build and boot to OS in Guybrush. Ensure that the secure counters are defined successfully in TPM NVRAM. Change-Id: I6818c6f7905aa2eb815059e23c4f79437593f8ca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-30soc/amd/cezanne: add missing PM_ACPI_* bit definitionsFelix Held
This part was copied from Picasso but Cezanne has some more bits used so add the definitions now. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icd128dca1ec30e7c70501c0e64482159be71cc7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-29cpu/x86: Rename X86_AMD_INIT_SIPI to X86_INIT_NEED_1_SIPISubrata Banik
This patch renames X86_AMD_INIT_SIPI Kconfig to leverage the same logic (to skip 2nd SIPI and reduce delay between INIT and SIPI while perform AP initialization) even on newer Intel platform. Change-Id: I7a4e6a8b1edc6e8ba43597259bd8b2de697e4e62 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56651 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-25soc/amd/*/data_fabric: use DF_ prefix for bit and shift definesFelix Held
Adding the DP_ prefix to the defines for MMIO_NP, MMIO_WE and MMIO_RE clarifies the scope of those definitions. For consistency also add this prefix to MMIO_DST_FABRIC_ID_SHIFT. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a509ccc071aa51a67552fb9e7195358a76fe4dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/*/include/data_fabric: make MMIO_NP definition SoC-specificFelix Held
On Picasso the MMIO_NP bit in the D18F0_MMIO_CTRL0 data fabric register is bit 12, but that has changed to bit 16 in Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I64c06b84e2c0737b259077e7932f418306638e19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-16lib/prog_loaders, soc/amd/: Make payload_preload use cbfs_preloadRaul E Rangel
Now that CBFS has this functionality built in, we no longer need to manually code it. payload_preload used to use the payload_preload_cache region to store the raw payload contents. This region was placed outside the firmware reserved region, so it was available for use by the OS. This was possible because the payload isn't loaded again on S3 resume. cbfs_preload only uses the cbfs_cache region. This region must be reserved because it gets used on the S3 resume path. Unfortunately this means that cbfs_cache must be increased to hold the payload. Cezanne is the only platform currently using payload_preload, and the size of cbfs_cache has already been adjusted. In the future we could look into adding an option to cbfs_preload that would allow it to use a different memory pool for the cache allocation. BUG=b:179699789 TEST=Boot guybrush and verify preloading the payload was successful CBFS DEBUG: get_preload_rdev(name='fallback/payload') preload successful Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idc521b238620ff52b8ba481cd3c10e5c4f1394bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-13sod/amd/cezanne: Use LZ4 for FSP-M when using SPI DMARaul E Rangel
This change adds about 30 KiB to FSP-M. When not using the SPI DMA controller, this change actually has a ~7 ms boot time penalty. When we use the DMA engine, we end up with about a 5 ms decrease. Once we switch to 100 MHz SPI this will help even more since we have effectively eliminated the decompression time. BUG=b:179699789 TEST=Boot nipperkin to OS and take boot time measurements fspm.bin 0x2efc0 fsp 90953 LZMA (233472 decompressed) fspm.bin 0x2cfc0 fsp 121156 LZ4 (233472 decompressed) - FSP-M / no async - | 508 - finished loading body | 177.019 | 179.384 Δ( 2.36, 0.16%) | ... | 970 - loading FSP-M | 0.346 | 0.346 Δ( 0.00, 0.00%) | | 17 - starting LZ4 decompress (ignore for x86) | 0.009 | 0.01 Δ( 0.00, 0.00%) | | 18 - finished LZ4 decompress (ignore for x86) | 53.916 | 59.475 Δ( 5.56, 0.37%) | - FSP-M / async - | 508 - finished loading body | 177.185 | 179.689 Δ( 2.50, 0.18%) | ... | 970 - loading FSP-M | 0.989 | 0.99 Δ( 0.00, 0.00%) | | 17 - starting LZ4 decompress (ignore for x86) | 9.483 | 12.877 Δ( 3.39, 0.24%) | | 18 - finished LZ4 decompress (ignore for x86) | 10.833 | 0.312 Δ(-10.52, -0.75%) | Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7d0363d27d98d4ed3afc6f802a13ff7986391921 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-12soc/amd/cezanne: Use LZ4 for FSP-SRaul E Rangel
This change increases the fsps.bin by 20 KiB, but it decreases decompression time. When not using preloading we save about 4 ms, when using preloading we save about 6. BUG=b:179699789 TEST=Boot nipperkin to OS fsps.bin 0x4afc0 fsp 66253 LZMA (200704 decompressed) fsps.bin 0x45fc0 fsp 87157 LZ4 (200704 decompressed) - FSP-S / no async - | 505 - starting to verify keyblock/preamble (RSA) | 9.36 | 11.012 Δ( 1.65, 0.11%) | ... | 971 - loading FSP-S | 7.095 | 6.141 Δ( -0.95, -0.07%) | | 17 - starting LZ4 decompress (ignore for x86) | 0.009 | 0.008 Δ( -0.00, -0.00%) | | 18 - finished LZ4 decompress (ignore for x86) | 15.149 | 8.98 Δ( -6.17, -0.42%) | | 954 - calling FspSiliconInit | 0.038 | 0.037 Δ( -0.00, -0.00%) | - FSP-S / async - | 508 - finished loading body | 177.978 | 179.689 Δ( 1.71, 0.12%) | ... | 971 - loading FSP-S | 6.928 | 7.225 Δ( 0.30, 0.02%) | | 17 - starting LZ4 decompress (ignore for x86) | 0.011 | 0.01 Δ( -0.00, -0.00%) | | 18 - finished LZ4 decompress (ignore for x86) | 8.312 | 0.241 Δ( -8.07, -0.58%) | | 954 - calling FspSiliconInit | 0.091 | 0.09 Δ( -0.00, -0.00%) | Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib0479ed3c92158799ea2b023bd2ce4c5c09757dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-12soc/amd/cezanne: Preload FSP-SRaul E Rangel
FSP-S is normally memmapped and then decompressed. There are about 7 ms between starting ramstage, and loading FSP-S. By preloading we can ensure the fsps.bin is already in RAM by the time we need it. This reduces boot time by about 7 ms. BUG=b: TEST=Boot nipperkin and see ~7ms reduction in boot time | 10 - start of ramstage | 0.044 | 0.044 Δ( 0.00, 0.00%) | | 30 - device enumeration | 1.899 | 2.073 Δ( 0.17, 0.01%) | | 971 - loading FSP-S | 6.645 | 6.628 Δ( -0.02, -0.00%) | | 15 - starting LZMA decompress (ignore for x86) | 0.016 | 0.01 Δ( -0.01, -0.00%) | | 16 - finished LZMA decompress (ignore for x86) | 15.266 | 8.316 Δ( -6.95, -0.47%) | | 954 - calling FspSiliconInit | 0.08 | 0.09 Δ( 0.01, 0.00%) | CBFS DEBUG: _cbfs_alloc(name='fsps.bin', alloc=0xc9761e5c(0xc97a3f0c), force_ro=false, type=-1) CBFS: Found 'fsps.bin' @0x1a1fc0 size 0x102cd in mcache @0xc97dd208 waiting for thread took 1 us <-- fsps.bin was preloaded CBFS DEBUG: get_preload_rdev(name='fsps.bin') preload successful Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5a728047b8ad92d70bba8485017579aa3df48d95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-10soc/amd/cezanne/fsp_m_parameters: add curly braces around else blockFelix Held
Since the if block contains multiple statements, it uses curly braces around them, so also add curly braces around the else block even though it only contains one statement. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia8d6b45ec16916ff77078446414de259cffa1475 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59070 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-10Rename ECAM-specific MMCONF KconfigsShelley Chen
Currently, the MMCONF Kconfigs only support the Enhanced Configuration Access mechanism (ECAM) method for accessing the PCI config address space. Some platforms have a different way of mapping the PCI config space to memory. This patch renames the following configs to make it clear that these configs are ECAM-specific: - NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT - MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT - MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS - MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER - MMCONF_LENGTH --> ECAM_MMCONF_LENGTH Please refer to CB:57861 "Proposed coreboot Changes" for more details. BUG=b:181098581 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max Make sure Jenkins verifies that builds on other boards Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-10soc/amd/cezanne,picasso/include/southbridge: use bitwise or in definesFelix Held
Use bitwise or instead of additions to build bit masks with multiple bits set. TEST=Timeless build results in identical image on amd/mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I42cc6686d8fa3f694a46ba4ca801a822ef1db1d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-09soc/amd/cezanne,picasso/include/southbridge: fix typo in defineFelix Held
In both the Picasso PPR (rev 3.16) and the Cezanne PPR (rev 3.03) bit 16 of the misc I2C pad control registers is defined as BiasCrtEn, so rename I2C_PAD_CTRL_BIOS_CRT_EN to I2C_PAD_CTRL_BIAS_CRT_EN. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If39ac17a433cb90c944fdde038cd246a995e193a Reviewed-on: https://review.coreboot.org/c/coreboot/+/59028 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-08soc/amd/{cezanne,picasso}: Stop passing base for fspm.binRaul E Rangel
We no longer need to do this since we relocate at runtime. BUG=b:179699789 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ibef849d5b3f0290cb7b7c5ff18aabe002bf53344 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-08soc/amd/cezanne: Enable CBFS_PRELOADRaul E Rangel
The follow up CLs will use CBFS_PRELOAD. The default CBFS_CACHE_SIZE was derived by examining the `cbfstool print` output and summing the files we intend to preload. BUG=b:179699789 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I208067e6ceec6ffb602a87bee3bf99a0a75c822d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-08soc/amd/cezanne: Add ASYNC_FILE_LOADINGRaul E Rangel
This gives us a knob that can be controlled via a .config to enable/disable file preloading. I left the option disabled because there is currently a race condition that can cause data corruption when using the SPI DMA controller. The fix will actually introduce a boot time regression because the preloads are happening at the same time as the elog init. I want to keep preloading disabled for now until I get all the sequencing worked out. BUG=b:179699789 TEST=Boot guybrush and verify no preloading happens. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie839e54fa38b81a5d18715f190c0c92467bd9371 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-05soc/amd/*/include/smi: move NUMBER_SMITYPES definition to the topFelix Held
Since all other defines for the number of certain things are at the top of the file, move NUMBER_SMITYPES there as well to keep things consistent. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idfb599531d6cc382ab258bd1eae89e7b35fa9e79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-05soc/amd/*/include/smi: fix off-by-one in SCIMAPS definesFelix Held
SCIMAPS is the total number of SCI to GEVENT mappings. configure_scimap returns early when the scimap is greater or equal than SCIMAPS, so for SMITYPE_ACDC_TIMER it returned early without doing what was expected from it to do despite that being a valid value, so fix this off-by-one. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibaf8c5618ddbf0b8d4cd612a7f1347d8562bbfcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-04Kconfig,soc/amd/cezanne: Make COOP_MULTITASKING select TIMER_QUEUERaul E Rangel
This reduces the number of selects required in the SOC_SPECIFIC_OPTIONS. BUG=b:179699789 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7f1364fc269ea5ec17982bf750a164a3290adb0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04soc/amd/cezanne/include/gpio: fix GPIO 106 native function namesFelix Held
The name looked a bit odd and the Cezanne PPR #56569 Rev 3.03 confirmed that the native function names don't have the EMMC_ prefix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I917c74afd98f2e2133e160d352f11f08c19a3ec6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-04soc/amd/cezanne/include/cppc: use AMD_CEZANNE_CPPC_H as include guardFelix Held
This makes this header file consistent with the rest. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ice2872b4a24032d3a65777795943602cd2595de7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03soc/amd/cezanne/include/aoac_defs: drop leading newlineFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8458fbee7edd19117a207f39ac8f9575b1374fbc Reviewed-on: https://review.coreboot.org/c/coreboot/+/58863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03soc/amd/cezanne/include: replace PICASSO with CEZANNE in include guardsFelix Held
Somehow missed renaming those when creating the coreboot support for Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I13c28f67d32ba987987cfc2b45e248d535ccdca9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03soc/amd/*/cpu: handle mp_init_with_smm failureFelix Held
When the mp_init_with_smm call returns a failure, coreboot can't just continue with the initialization and boot process due to the system being in a bad state. Ignoring the failure here would just cause the boot process failing elsewhere where it may not be obvious that the failed multi-processor initialization step was the root cause of that. I'm not 100% sure if calling do_cold_reset or calling die_with_post_code is the better option here. Calling do_cold_reset likely here would likely result in a boot-failure loop, so I call die_with_post_code here. BUG=b:193809448 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifeadffb3bae749c4bbd7ad2f3f395201e67d9e28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03cpu/x86/Kconfig: Remove unused CPU_ADDR_BITSArthur Heymans
Change-Id: I88f62c18b814ac0ddd356944359e727d6e3bba5a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
2021-11-02psp_verstage: convert relative address in EFS2Kangheui Won
Addresses in AMD fw table with EFS gen2 are relative addresses, but PSP doesn't accept relative addresses in update_psp_bios_dir(). Check for EFS gen2 and convert them as needed. BUG=b:194263115 TEST=build and boot on guybrush and shuboz Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I95813beba7278480e6640599fcf7445923259361 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-26cpu/x86: Introduce and use `CPU_X86_LAPIC`Felix Held
With using a Kconfig option to add the x86 LAPIC support code to the build, there's no need for adding the corresponding directory to subdirs in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added (cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding MTRR code selection patch and having verified that all platforms added the MTRR code on that patch shows that soc/example/min86 and soc/intel/quark are the only platforms that don't end up selecting the LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y which gets overridden to n in the Kconfig of the two SoCs mentioned above. Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-25cpu,soc/x86: always include cpu/x86/mtrr on x86 CPUs/SoCsFelix Held
All x86-based CPUs and SoCs in the coreboot tree end up including the Makefile in cpu/x86/mtrr, so include this directly in the Makefile in cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is selected be default could be added and the new CPU/SoC without MTRR support can override this option that then will be used in the Makefile to guard adding the Makefile from the cpu/x86/mtrr sub-directory. In cpu/intel all models except model 2065X and 206AX are selcted by a socket and rely on the socket's Makefile.inc to add x86/mtrr to the subdirs, so those models don't add x86/mtrr themselves. The Intel Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the subdirs. The Intel Xeon SP SoC directory contains two sub-folders for different versions or generations which both add x86/mtrr to the subdirs in their Makefiles. Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-22soc/amd/cezanne,picasso/chipset.cb: drop LAPIC deviceFelix Held
After adding code to handle the case of missing the link/bus on the CPU cluster device in mp_cpu_bus_init, there's no need to have the LAPIC device in the devicetree any more. TEST=Mandolin still boots successfully. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icfc4fb61b373129f3bf4f4de09c38076a8f66733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22arch/x86/ioapic: Select IOAPIC with SMPKyösti Mälkki
For coreboot proper, I/O APIC programming is not really required, except for the APIC ID field. We generally do not guard the related set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC). In practice it's something one cannot leave unselected, but maintain the Kconfig for the time being. Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: move printing of failure message into mp_init_with_smmFelix Held
Each CPU/SoC checks the return value of the mp_init_with_smm and prints the same error message if it wasn't successful, so move this check and printk to mp_init_with_smm. For this the original mp_init_with_smm function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm function is created which then calls do_mp_init_with_smm, prints the error if it didn't return CB_SUCCESS and passes the return value of do_mp_init_with_smm to its caller. Since no CPU/SoC code handles a mp_init_with_smm failure apart from printing a message, also add a comment at the mp_init_with_smm call sites that the code might want to handle a failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init_with_smm return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of mp_init_with_smm against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21acpigen,soc/amd,cpu/intel: rework static DWORD for CPPC tableMichael Niewöhner
Some elements in the ACPI CPPC table allow static DWORDs. Instead of using a fake register resource, use a tagged union with the two types "register" and "DWORD" and respective macros for CPPC table entries. Test: dumped SSDT before and after do not differ. Change-Id: Ib853261b5c0ea87ae2424fed188f2d1872be9a06 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-20psp_verstage: remove psp_ef_table structKangheui Won
psp_efs.h now has embedded_firmware struct which is copied from amdfwtool. Remove psp_ef_table from psp_verstage and use it instead to remove duplicates. TEST=boot on zork and guybrush Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ia362445cb7fc565b2d963f264461d833dc0338d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-19acpi/acpigen: Constify CST functions' pointersAngel Pons
The `acpigen_write_CST_package` and `acpigen_write_CST_package_entry` functions don't modify the provided C-state information. So, make the pointer parameters read-only to enforce this. Also constify arguments where possible. Change-Id: I9e18d82ee6c16e4435b8fad6d467e58c33194cf4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-15soc/amd: make configure_espi_with_mb_hook call conditionalFelix Held
If a system doesn't use eSPI or has the eSPI interface already configured in verstage on PSP, not calling configure_espi_with_mb_hook from fch_pre_init makes it a bit more obvious that the eSPI interface initialization will be skipped. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia77b83d56a5dab1bac6cfbbd92d33aa60a9e8b89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/common/include/espi: rename configure_espiFelix Held
Rename configure_espi to configure_espi_with_mb_hook to clarify that this function will call into the mb_set_up_early_espi function in the mainboard-specific code if it exists. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5d0f099288b0100242629c736dd69a8add977b5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/common/block/i2c: implement proper read_resourceFelix Held
Before this patch the reservation of the MMIO region of the I2C controllers was done in the LPC controller PCI device despite the I2C controllers already being devices in the devicetree. This patch implements this functionality as read_resources function of the I2C device instead. This will only reserve the memory when the I2C devices are enabled in devicetree which is a change from the previous behavior. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I67c853df3be2f593ecfa113ae2f74e5df7cf74e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58307 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-15soc/amd/cezanne,picasso/uart: implement read_resourceFelix Held
Implement the read_resources function for the UART devices so that the resource allocator knows about their fixed MMIO resources when enabled. TEST=UART still works on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4ffddee3f5f4281aca98ddfcefa639dfb7a38dae Reviewed-on: https://review.coreboot.org/c/coreboot/+/58306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13src/soc/amd/cezanne: enable clock gatingJulian Schroeder
Enabling clock gating for CGPLL to lower power consumption in S3 and S0i3 states. See also: Cezanne PPR chapter 7, rev 3.03. BUG=b:185273565 TEST=iotools mmio_read32 0xfed80e2c and 0e30 show clk gating enabled and suspend_stress_test works. Change-Id: I33cbdeec62e49db90b680da37e5028df03a9c015 Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13soc/amd/common/block/espi_util: Refactor eSPI SetupKarthikeyan Ramasubramanian
eSPI is setup in two different locations in bootblock depending on early port80 routing configuration. Also eSPI is setup in PSP, if verified boot starts before bootblock. Consolidate all the scenarios by initializating eSPI very early in fch_pre_init if verified boot starts after bootblock and eSPI is enabled. BUG=None TEST=Build and boot to OS in Guybrush. Perform S5->S0, G3->S0, warm reset and suspend/resume cycles for 50 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Icfeba17dae0a964c9ca73686e29c18d965589934 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13soc/amd/*: Enable ACPIMMIO decode first in fch_pre_initFelix Held
Since the GPIO mux/control MMIO regions are within the ACPIMMIO region, we need to call enable_acpimmio_decode_pm04 here first so that accessing the GPIO registers will work. BUG=None TEST=Build and boot to OS in Guybrush. Change-Id: I4bc076261c72cf999a5f2464b74cff6bf694d473 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13soc/amd/cezanne,soc/intel/common: rework CPPC table generationMichael Niewöhner
Make use of the newly introduced ACPI macros for CPPC table generation that currently exists of a bunch of confusing assignments of structs that only get partially filled. Test: dumped SSDT before and after do not differ. Change-Id: I844d191b1134b98e409240ede71e2751e51e2159 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-11soc/amd/cezanne/include/southbridge: add some more PM register definesFelix Held
Register and bit definitions are from the Cezanne PPR #56569 Rev 3.03. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib109efe679560604ff8209b4177611eb2aa9ebdf Reviewed-on: https://review.coreboot.org/c/coreboot/+/58068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-11soc/amd/common/include/lpc: add definitions for LPC LDRQ control bitsFelix Held
The definitions of bit 9 and 10 somehow got swapped between Picasso and Renoir/Cezanne, so put those in the Cezanne-specific header file. The reference code writes the same values to the raw bits in both, so we probably would still get away with putting this into the common header, but it's better to keep the defines consistent with the documentation in all cases. Register and bit definitions are from the Cezanne PPR #56569 Rev 3.03 and cross-checked to be compatible with the Picasso PPR #55570 Rev 3.16. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a033d63eeb06eed6783e4c3797ad8dea490db8d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-05Revert "soc/amd/cezanne: Disable Co-op multitasking"Raul E Rangel
This reverts commit 5f80e7c764b9a1cb46beeaa490a4f60be04abcd4. The smm_do_relocation failure has been fixed. I also added CPU_INFO_V2 into this patch to satisfy the dependency. BUG=b:194391185, b:179699789 TEST=reboot stress test guybrush for 50 iterations. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I134c14748711a9c9865e0cc3e3185825f85248ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/57894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-05src/soc to src/superio: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ieafbc93e49fcef198ac6e31fc8a3b708c395e08e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58082 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27soc/amd/cezanne/early_fch: move mb_set_up_early_espi into if blockFelix Held
mb_set_up_early_espi should only be called when SOC_AMD_COMMON_BLOCK_USE_ESPI is selected. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic8ad724a2a79c1995fbe9d97f11a0f69eed9435c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-27soc/amd/cezanne: Enable CCP DMAKarthikeyan Ramasubramanian
Enable CCP DMA use in PSP verstage. This helps to reduce the boot time. BUG=b:194990811 TEST=Build and boot to OS in Guybrush. Observed a 35 - 40 ms improvement in the boot time. Before CCP DMA: 508:finished loading body 898,286 (287,576) Total Time: 2,146,182 After CCP DMA: 508:finished loading body 853,627 (240,061) Total Time: 2,110,117 Cq-Depend: chrome-internal:4116566 Change-Id: I6e4f081622a2ec78763adf56548204efc1bccf39 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-27soc/amd/cezanne, vc/amd/fsp/*: Add support for CCP DMA SVC callKarthikeyan Ramasubramanian
Add support to access the boot device from PSP through Crypto Co-Processor (CCP) DMA. Implement a SVC call to use CCP DMA on SoCs where it is supported and a stub on SoCs where it is not supported. This provides an improved performance while accessing the boot device and reduces the boot time by ~45 ms. BUG=b:194990811 TEST=Build and boot to OS in guybrush. Perform cold and warm reboot cycling for 250 iterations. Change-Id: I02b94a842190ac4dcf45ff2d846b8665f06a9c75 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23soc/amd/common/blocks/include: rename gpio_banks.h to gpio.hFelix Held
This brings the AMD SoC GPIO code in line with the Intel SoC code and removes the not really needed suffix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie2dbec81dfe503869beb2872b01a7475e2b88b33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23soc/amd: rename program_gpios to gpio_configure_padsFelix Held
Use the same function name as in soc/intel for this functionality. This also brings the function name more in line with the extended version of this function gpio_configure_pads_with_override which additionally supports passing a GPIO override configuration. This might cause some pain for out-of-tree boards, but at some point this should be made more consistent, so I don't see a too strong reason not to do this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I88852e040f79861ce7d190bf2203f9e0ce156690 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-21soc/amd/cezanne/fsp_m_params: use DEV_PTR to check if device is enabledFelix Held
The aliases are defined in the chipset devicetree, so the device pointers will be available for all boards using this SoC. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id655e9eba9b8e9898fa01bf03876074e136cc7c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-20soc/amd/cezanna/acpi/mmio.asl: enable ACPI AOAC for I2CJulian Schroeder
This enables runtime power management for the I2C controllers. BUG=b:182556027, b:183983959 TEST=enable dynamic debug in kernel and check i2c D3/D0 transitions during suspend_stress_test. Change-Id: Ia6b9ca95d751f32b7cd701494377f15091c22d2f Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56462 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-20soc/amd/cezanne/acpi/mmio: uncomment AOAC_DEVICE macro for UARTsFelix Held
This enables runtime power management for the UART controllers. BUG=b:183983959 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4e57d6312feda459cec65f330c6d2072774d4eb5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-09soc/amd/cezanne/include/gpio: add remote GPIO pin mux definitionsFelix Held
Add the pin definitions for the remote GPIOs and the GPIO pin mux values for the GPIO mode of those pins. For now, accessing the remote GPIOs is only supported from the native coreboot code running on the x86 cores and not from verstage on PSP or ACPI. BUG=b:194524995 TEST=On Majolica with a Cezanne APU configuring GPIO 262 as output and then toggling that GPIO in an infinite loop in the mainboard's bootblock code results in GPIO 262 toggling as expected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0e57042e74da88503b36d6065e9500876287f8bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/56811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-09soc/amd/common/block/include/i2c: introduce I2C_RESET_SCL_PIN macroFelix Held
Add and use the I2C_RESET_SCL_PIN macro for populating the i2c_scl_pins array that is used for the sb_reset_i2c_peripherals call to bring the I2C buses into a defined state. TEST=Timeless build results in identical image for Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifedc09d0bf745545fa0510df7d5037f02b9012a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-08soc/amd/cezanne/fsp_m_params: set usb_phy version and length.Julian Schroeder
Setting the usb_phy version and length in the soc code instead of devicetree. That way the devicetree code does not have to reapeat it for different AMD Cezanne based systems. Tested on guybrush by changing phy settings in devicetree and then checking the usb phy register. Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: I2db49e095672054b9b15042fb003a93b67e3a4c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-08soc/amd/*/bootblock,early_fch: rework i2c_scl_pins configurationFelix Held
drive_scl in soc/amd/common/block/i2c/i2c.c writes the raw GPIO MMIO configuration register and drives it as output, so don't initially configure the GPIO as input with no pull up/down. This is a preparation to use the common AMD GPIO access functions instead of the raw register accesses, since the gpio_set function only sets the output value, but doesn't reconfigure the direction. Using gpio_output there instead would reconfigure the direction as well, but would result in doubling the number of MMIO accesses, so just configure the GPIOs correctly right away to avoid that. TEST=The waveform on the SCL pin of I2C3 on a barla/careena Chromebook looks exactly the same as before during the reset_i2c_peripherals call. This was probed at the SCL pad of the unpopulated I2C level shifter on the side that is connected to the SoC. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8e94afe0c755a02abcc722d5094e220d8781f8f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56807 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-01soc/amd/cezanne: Increase the FSP_M_SIZE configurationKarthikeyan Ramasubramanian
On mainboards with Cezanne SOC, serial enabled FSP_M binary size is greater than the size allocated in DRAM. Increase the allocated size for FSP_M binary in DRAM to handle both debug and release FSP_M binaries. Also adjust the verstage load address accordingly. BUG=None TEST=Build and boot to OS in guybrush with both debug and release FSP_M. Perform warm, cold reboot and suspend/resume cycling for 10 iterations. Change-Id: Ic6f90041e258039e691cbdb3a978cfe1f782642a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57293 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-31soc/amd/*/include/soc/gpio: remove GPIO_2_EVENTFelix Held
commit de7262f82cdc1a7c868dbc9ca41e186e885eb2ba (soc/amd: remove special GPIO_2 override soc_gpio_hook) removed the workaround that needed those definitions, so remove the now unused GPIO_2_EVENT definitions. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3f3e3061eade0e0cd25e2263451ccf6cefdc4ea4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56812 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-30soc/amd/cezanne/fch: implement and use fch_clk_output_48MhzFelix Held
Make sure that the 48MHz clock output that is typically used as a clock source for an I2S audio codec or a Super I/O chip. TEST=On Guybrush before and after this patch the final state of MISC_CLK_CNTL0 is 0x1006044, so BP_X48M0_OUTPUT_EN is set in both cases. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I38be344a95ccf166c344b2bddcb388fea437a4df Reviewed-on: https://review.coreboot.org/c/coreboot/+/56528 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-30soc/amd: Show SPI settings in bootblockMartin Roth
BUG=b:194919326 TEST=See SPI settings in bootblock Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I8ee8981986990240b09414cde8b84d9b109cb5b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-08-30soc/amd/cezanne/early_fch: Perform early SPI initializationKarthikeyan Ramasubramanian
Add the fch_spi_early_init call in fch_pre_init to perform early SPI initialization which enables SPI ROM and setting the speed & read modes. BUG=b:194919326 TEST=Build and boot to OS in Guybrush. Change-Id: Ibfbe6e16bd6b0dd46c13cecf2a35f0c0b4576b88 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56684 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-29soc/amd/cezanne/chip: add functionality to power down eMMC interfaceFelix Held
Power down the eMMC controller via the AOAC interface when it's not enabled in the devicetree. BUG=b:184978118 TEST=On guybrush the unused eMMC controller is disabled in AOAC after applying this patch. Before this patch it was enabled. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I18f4626a29fdc422218777058341b0eae401bcd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-08-18soc/amd/cezanne: Disable Co-op multitaskingRaul E Rangel
There are gremlins in the system. thread_coop_enable has an assert. This is currently problematic for two reasons. assert(current->can_yield <= 0); When doing smm_do_relocate we are entering a deadlock. The root cause hasn't been quite found yet, but it's related to co-op multi-threading. For some reason the assert in thread_coop_enable is firing when releasing the console_lock spin lock. I'm assuming cpu_info hasn't been initialized yet. The assert tries to perform a printk, but since the console_lock is still held we end up in a dead lock. This dead lock will generally not happen after a warm reset. Again I'm assuming because the cpu_info struct has some valid values at this point. For now disable multi-tasking until we fix the cpu_info initialization. BUG=b:194391185 TEST=Boot guybrush to OS Co-developed-by: nikolai.vyssotski@amd.corp-partner.google.com Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia3143f538a31b5aaaea104aa1d8bcf44e6dcb528 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57005 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-05soc/amd/cezanne/fsp_m_params:Configure the iommu_support UPDJason Glenesk
Configure the IOMMU support upd if iommu is enabled. BUG=b:194173037 Cq-Depend: chrome-internal:4027293,4027294 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: I56b433cdc1ca5459c51b4b764e22292bd27b8892 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-05soc/amd/cezanne: Generate IVRS for cezanneJason Glenesk
Generate IVRS for cezanne using common IVRS generation code. BUG=b:190515051 TEST=Build cezanne coreboot image. Compare IVRS table with agesa generated tables. Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: Ie15addba62ec7da25a7452512b6871e46c61b0a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-07-24soc/amd/*/chip.h: Correct PSPP Enum ValueMatt Papageorge
It appears the pspp_policy enum is not the same as the FSP definition currently being used. This means that the incorrect PSPP value setting would get read by FSP. For Zork programs this meant we actually were setting links as DXIO_PSPP_BALANCED instead of DXIO_PSPP_POWERSAVE. This change adds DXIO_PSPP_DISABLED as the first enum value to properly match the FSP definition and adjusts non AMD Customer Reference Boards that reference the enum to still send the same value even though it has now change definitions. If we actually want DXIO_PSPP_POWERSAVE for those boards that can be adjusted in a future change. BUG=b:193495634 TEST=Boot to OS with Majolica and Guybrush and run 10G iperf on wifi with other server on local network. Change-Id: I287b6d3168697793a2ae8d8e68b4ec824f2ca5ef Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-07-21soc/amd/cezanne/mca: add and use mca_bank_name[]Felix Held
This enables the MCAX checking and BERT entry generation for Cezanne. TEST=When printing all registers of all MCAX banks of core 0 on a google/guybrush device, the registers have values that look correctly and there is no general protection fault, so all MCAX MSRs that could be accessed exist on Cezanne. BUG=b:192997706 Change-Id: Ibe8047ce5bb5e7136a8786693bcced4d2225b1fd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56345 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21soc/amd/cezanne: enable crypto in psp_verstageKangheui Won
Enable RSA and SHA for cezanne since support has been added to the PSP. Also picasso and cezanne have different enums definitions for hash algorithm, so split that out into chipset.c. BUG=b:187906425 TEST=boot guybrush, check cbmem -t and the logs Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I725b0cac801ac0429f362a83aa58a8b9de158550 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 18:52:31 +0000