summaryrefslogtreecommitdiff
path: root/src/northbridge
AgeCommit message (Collapse)Author
2016-08-31i945: Enable changing VRAM sizeArthur Heymans
On i945 the vram size is the default 8mb. It is also possible to set it 1mb or 0mb hardcoding the GGC register in early_init.c The intel documentation on i945, "Mobile Intel® 945 Express Chipset Family datasheet june 2008" only documents those three options. They are set using 3 bits. The documententation also makes mention of 4mb, 16mb, 32mb, 48mb, 64mb but not how to set it. The other non documented (straight forward) bit combinations allow to change the VRAM size to those other states. What this patch does is: - add those undocumented registers with their respective vram size to the i945 NB code; - make this a cmos option on targets that have this northbridge. TEST: build, flash to target, set cmos as desired and boot linux. On Debian it can be found using "dmesg | grep stolen". NOTE: dmesg message about reserved vram are quite different depending on linux version Change-Id: Ia71367ae3efb51bd64affd728407b8386e74594f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/14819 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23src/northbridge: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I6a533667c7c8ff5ec6ab9d4e1cfc51e993a90084 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16280 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-09x4x: make preallocated IGD memory a cmos optionArthur Heymans
This allows to set the preallocated memory for the IGD on x4x using a cmos option. If no cmos option is found a default value of 64M is used. TESTED most options on ga-g41m-es2l with 2G dimm in one slot and 2x2G. 352M also works in contrast with gm45 where it is known to cause issues with certain ram combinations. Change-Id: I9051d080be82f6dfab37d353252e29b2ed1fca7f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15492 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09x4x: add non documented vram sizesArthur Heymans
The Intel documtentation, "Intel ® 4 Series Chipset Family" mentions the possibility of 1, 4, 8 and 16M of preallocated memory for the IGD, but does not document this. This allows to set those undocumented values. TESTED on ga-g41m-es2l with 2G dimm in one slot and 2x2G. Change-Id: I92beb8d78907d4514a5aaf69248dd607dcf227c0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15491 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-02amd/amdfam10: eliminate dead codePatrick Georgi
if (gart) { foo = gart?a:b; } never evaluates to foo=b. Change-Id: Ibc7376687374065585b125a670dea5fe46bda97a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1347365 Reviewed-on: https://review.coreboot.org/16008 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31src/northbridge: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: I5aa27f06f82a8309afb6e06c9e462e5792aa9986 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15940 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-28bootmode: Get rid of CONFIG_BOOTMODE_STRAPSFurquan Shaikh
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and developer mode check functions to vboot. Thus, get rid of the BOOTMODE_STRAPS option which controlled these functions under src/lib. BUG=chrome-os-partner:55639 Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-27nb/intel/x4x: Fix CAS latency detection and max memory detectionDamien Zammit
Now hardcode maximum memory frequency capability to 800MHz, as all chipsets in x4x family support PC2-6400 according to the datasheet. CAS latency detection also relies on this, and has been cleaned up. Ram initialization does not work with FSB 1333MHz / DDR2 800MHz combination, so disable this combination for now, and reduce to 667MHz instead. Still don't know why this is the case, but FSB1333/667 works. These changes should now allow existing configurations to continue working, while providing support for previously unworking configurations, due to previous buggy CAS latency detection code. TESTED: on GA-G41M-ES2L CPU: E5200 @ 2.50GHz (FSB 800MHz) 2x 1GB 667MHz hynix worked @ 667 1x 2GB 800Mhz ARAM worked @ 800 1x 1GB 667Mhz StarRam worked @ 667 2x 2GB 800Mhz (generic) worked @ 800 Change-Id: I1ddd7827ee6fe3d4162ba0546f738a8f9decdf93 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15818 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-26intel sandy/ivy: Redefine DCACHE_RAM_SIZE and DCACHE_RAM_MRC_VAR_SIZEKyösti Mälkki
Match the definition and use of these variable with haswell, such that DCACHE_RAM_MRC_VAR_SIZE is not included in DCACHE_RAM_SIZE. Change-Id: I5af20f63cd0cb631d39f7c7fe0e2a99ebd3ce986 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15761 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-19nb/intel/x4x: Fix CAS latency detectionDamien Zammit
Fix and use the failsafe CAS detection logic rather than recalulating the values from raw SPDs. Tested on GA-G41M-ES2L with 2x2GB DDR2-800 DIMMs (which worked before and still work) Change-Id: I6af0f1705d099f7bcbff8c9baa94a68dae689e01 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15726 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2016-07-15intel/x4x: Do not use scratchpad register for ACPI S3Kyösti Mälkki
If S3 support was implemented for this platform later on, use romstage handoff structure instead. Change-Id: I03c1e07a7fcc17c27203d0c4e32e3958f2ba5273 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15716 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2016-07-15intel/pineview: Do not use scratchpad register for ACPI S3Kyösti Mälkki
If S3 support was implemented for this platform later on, use romstage handoff structure instead. Change-Id: Ib0cf3ad41753baee26354c5ed19294048e7fb533 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15715 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2016-07-15AGESA: Use common romstage ram stackKyösti Mälkki
Change-Id: Ie120360fa79aa0f6f6d82606838404bb0b0d9681 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15466 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-14nb/intel/pineview/northbridge.c: Remove legacy_hole_size_k declarationJonathan Neuschäfer
Change-Id: I7c3973ff325f11a86728e8660c70839776981aa5 Reported-by: GCC 6.1.0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15554 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-09nb/intel/x4x: Fix underclocking of 800MHz DDR2 RAMDamien Zammit
Previously, any 800MHz DIMMs were being slowed to 667MHz for no reason other than there was a bug in the maximum frequency detection code for the MCH. Change-Id: Id6c6c88c4a40631f6caf52f536a939a43cb3faf1 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15257 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-07intel/sandybridge: read correct leaf for cpu familyRyan Salsamendi
Reading cpuid leaf 0 is incorrect for testing cpu family. Use leaf 1 instead. See Intel SDM 2a Table 3-17. Change-Id: Ib2c95cdd1fb93db06a08ecd7266f6b88700caf83 Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com> Reviewed-on: https://review.coreboot.org/15346 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-06-26intel/i945: Use common ACPI S3 recoveryKyösti Mälkki
Change-Id: I6f0cdc80870fddeaada3191e493bd85fdefee07f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-23intel/sandybridge: Fix builds with System Agent blobKyösti Mälkki
Broken with commit: 5c10abe nb/intel/sandybridge: increase MMCONF_BASE_ADDRESS Available sandybridge/systemagent-r6.bin has MMCONF hard-coded at some places and samsung/lumpy fails at boot here: CBFS: Locating 'mrc.bin' CBFS: Found @ offset 9fec0 size 2fc94 System Agent: Starting up... System Agent: Initializing These are the last lines as captured over USB debug. Change-Id: I441847f0e71a5e1be9c8ef6a04a81eb7bdd8a6d9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15328 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-22Ignore RAMTOP for MTRRsKyösti Mälkki
Without RELOCATABLE_RAMSTAGE have WB cache large enough to cover the greatest ramstage needs, as there is no benefit of trying to accurately match the actual need. Choose this to be bottom 16MiB. With RELOCATABLE_RAMSTAGE write-back cache of low ram is only useful for bottom 1MiB of RAM as a small part of this gets used during SMP initialisation before proper MTRR setup. Change-Id: Icd5f8461f81ed0e671130f1142641a48d1304f30 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15249 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-22intel/model_206ax: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: Ib3250677ee926deaa957c83aca7479eb0159358c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15231 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-20nb/intel/sandybridge/raminit: Use supported CASPatrick Rudolph
Instead of programming unsupported CAS use the highest supported value. Start at DDR3 maximum of CAS 18T. Increase error message verbosity level. Useful for overclocking. Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16). Allows to run a DDR3-1600 DIMM at 933Mhz. Change-Id: I2e8aadd541f06fa032ad7095c9a2d5e3bb7613f3 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15217 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-20nb/intel/sandybridge/raminit: Do code cleanupPatrick Rudolph
Calculate the value from current DDR frequency. Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16). Change-Id: I57ffbfeb291fc2fede278d18527993e7432e9bd8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15184 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-20nb/intel/sandybridge/raminit: Do code cleanupPatrick Rudolph
Simplify calculation of value. Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16). Change-Id: I3ecd12c431b46a8d2218f33d7eb3e10de3bcd61d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15181 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-20nb/intel/sandybridge/raminit: Allow 933Mhz on Lenovo devicesPatrick Rudolph
Set max_mem_clock_mhz in devicetree to 933Mhz. Allows to run the memory at up to DDR3-1866. The same frequency was allowed within the first vendor bios, but Lenovo than decided to limit it to DDR3-1333. Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16). The RAM is now running at DDR3-1600 instead of DDR3-1333. This gives about 4% performance increase in glmark2 using the Intel GPU. Change-Id: If15be497402d84a2778f0434b6381a64eda832d6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15158 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-17intel/model_206ax: Move platform specific definesKyösti Mälkki
Change-Id: I3c517fc55dd333b1a457324f1d69aeb6f70acec2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15197 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-06-17Move definitions of HIGH_MEMORY_SAVEKyösti Mälkki
This is more of ACPI S3 resume and x86 definition than CBMEM. Change-Id: Iffbfb2e30ab5ea0b736e5626f51c86c7452f3129 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15190 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-12nb/intel/raminit (native): Read PCI mmio size from devicetreePatrick Rudolph
Instead of hardcoding the PCI mmio size read it from devicetree. Set a default value of 2048 MiB and 1024MiB for laptops without discrete graphics. Tested on Sandybridge Lenovo T520. Change-Id: I791ebd6897c5ba4e2e18bd307d320568b1378a13 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15140 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-12nb/intel: Factor out common MRC codePatrick Rudolph
Remove code duplication and use the common function store_current_mrc_cache instead. No functionality is changed. Tested on Sandybridge Lenovo T520. Change-Id: I4aa5463f1b1d5e1afbe44b4bfc659524d86204db Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15074 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-04nb/intel/x4x: Fix unpopulated valueDamien Zammit
Previously, 0x0 was the value being used for an unpopulated dimm on spd[62], however some DDR2 dimms have 0x0 as a valid value. Now use 0xff which is an unused value even on DDR2/DDR3. Change-Id: I55a91a6c3fe3733a7bb2abc45ca352c955c07c99 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15058 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04gm45: enable setting all vram sizes from cmosArthur Heymans
Setting the size of the preallocated memory for the igd is done using a cmos parameter, gfx_uma_size. This was limited to a subset of all available sizes, that were already implemented elsewhere in the northbridge code. What this does is change the cmos parameter to 4 bits instead of 3 bits to accomodate all vram sizes. It also adds a sane default of 32mb that already was in place. The northbridge code that reads this cmos parameter is also changed for this new cmos settings. 352M is disabled since it causes issues on systems with 4GB or more ram. TEST: Build, flash target. Clear cmos by corrupting the checksum (nvramtool -c something). Set a desired value in gfx_uma_size using nvramtool. "dmesg | grep stolen" to see what is actually allocated. Change-Id: Ia6479d03f1abe6d0c94bd7264365505e8f8eaeec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/14900 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-06-04AGESA: Fix invalid use of CFG_ declarationsKyösti Mälkki
The declarations of CFG_ evaluate to correct values only when included after the definitions of BLDCFG_ in buildOpts.c. So we never have CFG_PLAT_NUM_IO_APICS defined here. Change-Id: I94b3dee5a3207b37921eb24a0bcd73b5a217b2d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14887 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31nb/intel/x4x: Add DMI/EP initDamien Zammit
The values were obtained from vendor bios at runtime. I am not 100% sure of the sequence required to initiate them, but guessed from the gm45 code. There may be some status bytes needed to be polled during the sequence that is missing, but as I don't have bios writer's datasheet it's very hard for me to know. Change-Id: Idd205e0bab5f75e01c6e3a5dc320c08639f52db8 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14925 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31Fix leaking CONFIG_VGA=yKyösti Mälkki
Items under DEVICE_SPECIFIC_OPTIONS got selected without the driver being selected. Change-Id: I1797fa6175620a9291873559a6308eaea85a090e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14823 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-17intel/sch: Merge northbridge and southbridge in src/socStefan Reinauer
Change-Id: I6ea9b9d2353c0d767c837e6d629b45f23b306f6e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14599 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2016-05-09nb/amd/mct_ddr3: Report correct DIMM size in SMBIOS structureTimothy Pearson
The existing DIMM size calculation for DDR3 was incorrect. Use the recommended calculation from the DDR3 SPD specification. Change-Id: Id6a39e2b38b5d9f483341ebef8f2960ae52bda6c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14739 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09nb/amd/mct_ddr3: Add support for non-ECC DIMMs on AMD Family 15hTimothy Pearson
While some stubs existed before this patch to handle non-ECC memory initialization, there were a number of ECC detect unaware sections of code. Add ECC support detection to those sections. Change-Id: I56dad8a0f6833b2f42796212afb9777e9cc73d6d Tested-On: ASUS KGPE-D16 Tested-With: 1x Opteron 6262 Tested-With: 1x SuperTalent 4G non-ECC DIMM in slot A2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14737 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Damien Zammit <damien@zamaudio.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-08intel/pineview: Don't try to store 34 bits in 32Stefan Reinauer
Mask out the bit that doesn't fit in 32bits, so gcc 6.1 is happy Change-Id: I13e2b41742206b8d86b90314b80cc324c00ae637 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14639 Reviewed-by: Damien Zammit <damien@zamaudio.com> Tested-by: build bot (Jenkins)
2016-05-06amd/gx2 + amd/lx: Fix shift overflow issueStefan Reinauer
gcc 6.1 complains that SMM_OFFSET << 8 is larger than the register it is assigned to (rightly so): src/northbridge/amd/gx2/northbridgeinit.c:196:23: error: result of '1077936128 << 8' requires 40 bits to represent, but 'int' only has 32 bits [-Werror=shift-overflow=] msr.lo = (SMM_OFFSET << 8) & 0xfff00000; ^~ Change-Id: Ib0d669268202d222574abee335a6a65c8a255cc7 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14617 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-05rdc/r8610: Move to src/socStefan Reinauer
Change-Id: I99e5d7f3b46c90ca863ddf6c186b5447d0c8e6f2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14607 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-05dmp/vortex86ex: Merge northbridge and southbridge into socStefan Reinauer
Change-Id: I16c04452d2d6c3205aea29fe8aa8fad8fc485a46 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14600 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-04nb/intel/sandybridge/raminit: support calling dram_freq multiple timesPatrick Rudolph
The PLL will never lock if the requested frequency is already set. As the fallback may request the same frequency again exit early to prevent a hang. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Change-Id: I625b2956346d8c50cca84def6190c076bf99dbec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14174 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04nb/intel/sandybridge/raminit: add additional fallbacksPatrick Rudolph
Add the following fallbacks: * Try decreasing clock frequency. In case of DDR1600 the next possible value of DDR1333 is being used. * Try decreasing clock frequency. In case of DDR1333 the next possible value of DDR1066 is being used. * Disable failing channel. The system may be able to boot with a single channel enabled. The fallbacks are untested. Change-Id: I3be7034ad25312b3ebf47a54f335a3893f8d7cc1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14173 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04nb/intel/gm45: Fix native text mode initializationNick High
The LVDS port is configured to accept data from pipe A, but the panel fitter and VGA were attached to pipe B. Changes to VGACNTRL: - select pipe A instead of pipe B. - disable VGA centering to fix jitter. TEST=Build and run on Thinkpad X200 in both text and framebuffer modes. Change-Id: I2356f264580d8b021952c217de3477291d866f98 Signed-off-by: Nick High <nhigh@openmailbox.org> Reviewed-on: https://review.coreboot.org/14524 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-05-02nb/amd/mct_ddr3: Only initialize ECC bits onceTimothy Pearson
The ECC check bits of all ECC DIMMS were inadvertently initialized twice in the same routine, significantly delaying startup. Part of this was related to an obsolete MCA workaround that has been fixed through multiple commits, therefore the workaround is no longer needed. Only initialize the ECC check bits once. Change-Id: I90ac1147d9b006794d29b866a9cb5b7ead8f01e7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14503 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-01nb/amd/mct_ddr3: Warn if MaxRdLatency training fails on Family 15hTimothy Pearson
Change-Id: Idb948acd1a508379f600fbd2fd40fb26b7571d7c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14545 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Stop receiver enable cycle training after window foundTimothy Pearson
During receiver enable cycle training on Family 15h the entire range of possible delays is searched, even though the single passing window is often found nearly immediately. Skip the remainder of the delay range after the passing window has been located. Change-Id: If98217fa8e7de77366762d3c7bb01049a1dc080f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14544 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Do not constantly reset read data timing registers to 0Timothy Pearson
During DQS receiver enable cycle training on Family 15h platforms the read data timing registers were inadvertently set to zero on every lane training attempt. Ensure that the read data timing registers are correctly set after each lane is trained in receiver enable cycle training. This allows more than one RDIMM to function on a given DCT channel. Change-Id: I87d732f0383e9785a73b57e6f48855f3e872f1f9 Tested-On: ASUS KGPE-D16 Tested-With: 1x Opteron 6262HE Tested-With: 4x Crucial 36KSF1G72PZ-1G6M1 (slots A2 / A1 / B2 / B1) Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14543 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Skip nibble training when current DIMM is not x4Timothy Pearson
Change-Id: I1f5b024606093dc81de3f3d69b7a43e20141b709 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14542 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Fix x4 DIMM receiver enable training on Fam15hTimothy Pearson
The existing Family 15h receiver enable training code stored temporary delay values in the wrong variables, leading to the requisite averaging of delays across nibbles not being applied. This in turn made x4 DIMMs less stable than they should have been. Store temporary nibble delay values in a dedicated array. Change-Id: Ic5da898af7d689db4110211f89b886ccdbb5f78f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14541 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-29nb/intel/sandybridge/raminit: fix regression "always use mrccache"Patrick Rudolph
Fix regression introduced by: Ib48fe8380446846df17d37b22968f7d4fd6b9b13 Don't run channel_test on S3 resume as it overrides memory that might be in use. Fixes MCE events reported by the GNU/Linux kernel that low memory has been modified. Reset on failed s3 resume. Change-Id: Ibadea286619c7906225f86a93aaa0b4caf26cabe Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-28nb/amd/mct_ddr3: Restart system on training failure instead of using die()Timothy Pearson
DIMM training can sporadically fail due to external influences or various errata. In these cases, restarting to retry training is a more appropriate response than halting the system and requiring manual intervention. Change-Id: Id49f7419f56e0640a84448cc06ecbaf62bed145e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14529 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-26nb/amd/mct_ddr3: Report correct DIMM in MRS setup routinesTimothy Pearson
The wrong DIMM number was used in the initial non-target MRS setup routines. This had no functional impact other than to print the wrong DIMM number in the DDR3 verbose debug output. Change-Id: I480118ed00e1786a06e641a56f0fb19cd87f92eb Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14501 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-26nb/amd/mct_ddr3: Fix a number of minor errors in RDIMM setupTimothy Pearson
The existing RDIMM RC control word send routines were a hodgepodge of various AGESA chunks with different ways of handling the same task. Unify the control word chip select setup, use precise timing routines on Family 15h, fix a couple of incorrect masks, and add additional debugging statements. It is believed that this patch is cosmetic and does not significantly alter existing functionality. Change-Id: Ie4ec7b6a7be7fce09e89f9eec146cc98b15b6160 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14500 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-25nb/amd/mct_ddr3: Scale lane delays for each DIMM after MEMCLK changeTimothy Pearson
When more than one DIMM is installed on a DCT, only the first DIMM delay values are scaled to the new memory clock frequency after a memory clock change during write leveling. Store the previous memory clock of each DIMM during write leveling to ensure that every DIMM has its delay values rescaled. Change-Id: I56e816d3d3256925598219d92783246f5f4ab567 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14479 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22Revert "nb/amd/mct_ddr3: Disable MCE framework during DRAM training"Timothy Pearson
After substantial testing it has been determined that it is neither required nor safe to disable the DRAM MCA during initial startup. This (mostly) reverts commit c094d9961144871c472698c41ce634e58abb6a32. The minor debugging enhancements from that commit were left in place. Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Config-RAM: 1x Kingston 9965516-483.A00LF Change-Id: I58fcc296b8c45ecaedf540951c365e4ce52baaf5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14446 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Enhance debugging around MEMCLK frequency changeTimothy Pearson
Change-Id: I5056cf885b7063a97c095bfaaf01dd8da777a425 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14447 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Fix RDIMM training on certain DIMMsTimothy Pearson
Certain RDIMMs have inherently large write levelling delays, in some cases exceeding 1.5 MEMCLK. When these DIMMs are utilized, the phase recovery system requires special handling due to the resultant offset exceeding the phase recovery reporting capabilities. Fix an old error where delays > 1.5 MEMCLK were not being programmed (gross delay high bit was not in set range), and restore special delay handling for delays greater than 1.5 MEMCLK. Also enhance debugging for x4 DIMMs around the affected code. Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Change-Id: I0fb5454c4d5a9f308cc735597607f095fe9188db Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14441 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Run fence training on each node after memory clock changeTimothy Pearson
The BKDG requires phy fences to be re-trained after a memory clock change. Memory training on the ASUS KGPE-D16 and KCMA-D8 somehow "mostly" worked -- without actually following this requirement -- ! Fix the single typo that caused several weeks of delay in putting servers with Kingston RAM (and others) into production... Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Change-Id: I197e6728d2b0ac8c1535740599459d080b17af33 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14445 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-20AMD CIMX: Drop unused codeKyösti Mälkki
We never define B1_IMAGE or B2_IMAGE. These are about building CIMx as separate binary modules, while coreboot builds these into same romstage or ramstage module. Change-Id: I9cfa3f0bff8332aff4b661d56d0e7b340a992992 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14393 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Kerry Sheh <shekairui@gmail.com>
2016-04-19kbuild: Allow drivers to fit src/drivers/[X]/[Y]/ schemeStefan Reinauer
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make them pluggable. Also, fix up the following driver subdirectories by switching to the src/drivers/[X]/[Y]/ scheme as these are hard requirements for the main change: * drivers/intel * drivers/pc80 * drivers/dec Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14047 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-16northbridge/amd/{lx,gx2}: remove immediate accesses of 0Patrick Georgi
gcc doesn't like these because they're undefined behavior, so use zeroptr instead. For the loop that just does a number of writes (0..4), use zeroptr + i. Checked the disassembly (AMD_RUMBA and PCENGINES_ALIX2D) to not contain ud2 anymore and to look reasonable where zeroptr was used. Change-Id: I4a58220ec9a10c465909ca4ecbe5366d0a8cc0df Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14345 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-04-13amd/agesa/family12/dimmSpd.c: Indent (tab) fixEdward O'Callaghan
Trivial; Use tab over space for indent. Clean up some ASCII art while here. Change-Id: Id2478d140a98596c5eeefdf5b047c1ca23203909 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: https://review.coreboot.org/8016 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-11and/nb/mct_ddr3: Pack all structures passed to ramstage and set alignmentTimothy Pearson
Two of the MCT data structures passed as substructures to ramstage were not packed, and additionally no alignment was specified. On at least SP5100-based platforms, specifying packed with no alignment caused boot failure dependent on the exact compiled binary layout (LPC hang). Specifying the alignment and packing the remaining structures appears to have resolved the remaining LPC hang issues on the KGPE-D16. Note that packing the remaining structures alone was not sufficient to eliminate the hang, however removing the packed attribute entirely (during debugging) did resolve the hang at the expense of potential problems in ramstage. Change-Id: If3a7509ed438870d4d05caaaaa091e1c47bf9b97 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14303 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-04-11nb/amd/amdfam10: Write MCT variables to flash after PCI configurationTimothy Pearson
The SPI controller needs to be set up on devices such as the SP5100 before it can be accessed to write MCT backup data. Move the backup data write after PCI configuration has been completed. Change-Id: Ibcf31755242ac058407a422ce8aa33d6b0b293c7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14305 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-10nb/intel/sandybridge/raminit: always use mrccachePatrick Rudolph
Always use MRC cache if possible. Added a CRC16 array to make sure the DIMMs haven't been replaced. In case one of the CRC's doesn't match, start normal RAM training. Use new fallback in case of broken mrc cache. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Test result: The system boots a lot faster using the MRC cache. On swapping DIMMs the CRC16 doesn't match and normal ram training is started. Change-Id: Ib48fe8380446846df17d37b22968f7d4fd6b9b13 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14172 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-08Revert "nb/amd/mct_ddr3: Enable DIMM parity when RDIMMs installed"Timothy Pearson
This reverts commit f961becc433bf23fc8744fdfd757f0cdb75c2c62. On studying the BKDG more closely this is not the correct place to enable DIMM parity. Further patches to clarify the parity setup process on Family 15h are forthcoming. Change-Id: I5a3a4f1621e3048f9dfc159709410be9de6ebecd Reviewed-on: https://review.coreboot.org/14271 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/mct_ddr3: Reenable sync flood after ECC initTimothy Pearson
The sync flood reset fix in Change-Id: I62d897010a8120aa14b4cb8d096bc4f2edc5f248 and related changes have made it possible to move the sync flood enable statements back into romstage. Change-Id: I5a3a4f1621e3048f9dfc159709410be9de6ebece Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14270 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/mct_ddr3: Add MCE reporting logicTimothy Pearson
When a fatal error and subsequent sync flood / reset occurs, the MCA status registers may contain valuable information on the cause of the fatal error. Add functions to report MCEs and reset the MCA status registers early in the boot process. Change-Id: Icde1051ac22f93688de1330f5e2c9ce28b14b59a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14265 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/amdfam10: Only flag machine check exception if valid bit is setTimothy Pearson
Change-Id: I42d901ae9445943a863fb3ba9bda5a915f255e02 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14264 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/mct_ddr3: Cache whether ECC is allowed at the platform levelTimothy Pearson
Certain AMD platforms, such as those using the SP5100 southbridge, contain a very poorly documented bug related to LPC ROM access, which is triggered by repeated (hundreds or more) rapid calls to get_option(). This bug manifests as a complete system deadlock in ramstage device configuration, requiring standby power to be removed from the system to release the deadlock. Cache the platform ECC status to avoid repeated calls to get_option() in the lane count detection logic. Change-Id: I8b48c523218ccc8c113319957d6eca2d15e1070f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14273 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-05nb/intel/sandybridge/raminit: die in toplevel functionPatrick Rudolph
In error case die in top level function. No functionality is changed. Change-Id: Ie15b01184d40bdbce20d49dcab2f9fb607068c7a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14171 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-05nb/intel/sandybridge/raminit: prepare raminit for fallbackPatrick Rudolph
Return errors to top level ram init function. Required by the folowing series to implement a fallback. No functionality is changed. On error case the system still halts in every test. Change-Id: I6278c4a1d7b4a96be8988a60671fc3d72cd6cb3d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14170 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-01nb/amd/mct_ddr3: Fix revision mask for DR processorsTimothy Pearson
The revision mask for all DR-* series processors was incorrectly set to only include the DR-B revision mask. Include all DR-* series prcessors in the DR_ALL revision mask. Change-Id: Iceda96aa6267b24abcbf78d39f4848d2be8053b8 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Found-by: Coverity, CID 1229627 (#1 of 1): Logically dead code (DEADCODE) Reviewed-on: https://review.coreboot.org/14216 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-03-31nb/amd_mct_ddr3: Move DRAM MCE sync flood enable to ramstageTimothy Pearson
Enabling sync flood on DRAM MCE directly after ECC clear can lead to a system hang with no way to determine the offending DRAM module. Clear MCEs after ECC setup, but do not enable sync flood until NB setup in ramstage to allow time for any MCEs to accumulate in the status registers. Before enabling sync flood on MCE, determine if any MCEs were logged during ramstage execution and display them on the serial console. Also clear the DRAM ECC sync flood bits during DRAM training and initial ramstage execution. Change-Id: Ibd93801be2eed06d89c8d306c14aef5558dd5a15 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14192 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-31nb/amd/mct_ddr3: Clear early MCEs and report DRAM MCEsTimothy Pearson
During power on from cold (S5) state, numerous MCEs are generated before DRAM training starts, e.g. during HT link training. Clear these MCEs before DRAM training start, and report any MCEs generated during DRAM training. Change-Id: I7d047571242e5bd041e4aac22c1ec1d7d26ef0e6 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14191 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-31nb/amd/mct_ddr3: Disable MCE framework during DRAM trainingTimothy Pearson
On Family 15h processors, with certain RDIMMs, MCEs are generated as a normal part of DCT startup / DRAM training. Disable sync flood on parity or UC data error until ECC has been enabled. Change-Id: Ife54751ff127ffd59baaad35d3fea14ea01ef505 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14186 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30nb/amd/mct_ddr3: Enable DIMM parity when RDIMMs installedTimothy Pearson
This resolves a long-standing issue with RDIMM control word configuration failure, likely due to random parity failure. Change-Id: If8b8dc5b8b99f4c2fe29b3a133b064631e4693be Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14184 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30northbridge/amd/amdfam10: Add family15h model10h-1fh (Trinity)Damien Zammit
Change-Id: I96d695ed10176276116fcf3a2b77605fb3f2d5db Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13710 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30nb/intel/sandybridge/raminit: move ram training into seperate functionPatrick Rudolph
In order to add a fallback mechanism, move the ram training code into a new function. This function will be called multiple times and must return error or success to the calling function. Change-Id: I5ee1b3a528290d8252d236b9152b81291736958a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14169 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-29nb/intel/sandybridge/raminit: move dimm_info into ramctr_timingPatrick Rudolph
It's required to store the dimm_info in ramctr_timing as only ramctr_timing is written to mrc cache. Allows to fill SMBIOS type 17 if mrc cache is used. Change-Id: I7634b05069df307d471938d9854997a018de81b3 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14168 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-28nb/amd/mct_ddr3: Use standard C function calls in mct_ResetDataStruct_D()Timothy Pearson
Replace open coded memset() functions with calls to the library function. The new code also explicitly backs up and restores the data structures that are preserved across calls to mct_ResetDataStruct_D(), and no longer relies on structure member order to function correctly. Change-Id: I6dd6377deda0087cd1b65f7555588978657d6516 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-26nb/amd/amdmct: Select max_lanes based on ECC presence or absenceDamien Zammit
Change-Id: Ic5482dc13ab7b53ec4df408bbe32d20888ae2e12 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13725 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-24nb/amd/mct_ddr3: Set the NBP0 read latency from P0 trained valuesTimothy Pearson
During maximum read latency training on Family 15h processors, the maximum read latency was incorrectly set from the NBP1 value instead of the correct NBP0 value. Modify maximimum read latency training to explicitly operate on the NBP0 value, and store the previously calculated NBP1 value for reference by other portions of the training algorithm. Change-Id: I5d4a6c2def83df3e23f1a4c598314c31a0172cd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14150 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-03-23nb/amd/mct_ddr3: Remove spurious Addl_Index variable in ↵Timothy Pearson
dqsTrainMaxRdLatency_SW_Fam15() Change-Id: Ic3f636983cf6ba2796ee56e2a25b56513a4343c1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14148 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21nb/amd/amdmct/mct_ddr3: Ensure BlockRxDqsLock does not remain setTimothy Pearson
Under certain conditions (training abort) BlockRxDqsLock could remain set in violation of the BKDG. Ensure BlockRxDqsLock is reset to 0 after a lane training abort. Change-Id: I1a49a24d02b2b7cacae074794ec274a424a9e66b Reviewed-on: https://review.coreboot.org/14144 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-16cpu/x86/mtrr: move cache_ramstage() to its only userAaron Durbin
The Intel i3100 northbridge code is the only user of cache_ramstage(). Therefore, place it next to the sole consumer. Change-Id: If15fb8d84f98dce7f4de9e089ec33035622d8f74 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14097 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-13nb/amd/mct_ddr3: Use correct initial UI setting during DRAM trainingTimothy Pearson
Rebasing change I3be808db5d15ceec4c36d17582756b01425df09a did not take into account the default UI setting introduced in change I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 , causing DRAM instability and occassional failure to boot. Use the correct 1UI value for the modified function semantics. Change-Id: I9fd24cf83e4c4083c6e467d49021c98e5f5f2c53 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14073 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13northbridge/intel/i3100: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i3100 boards in the chipset. Change-Id: Ia66a0561c75777a9e98bb87117859808a2ff3732 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13786 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13northbridge/intel/i82810: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i810 boards in the chipset. Change-Id: Ifda7dcfdf37b6affce838ee96ca6382b2d4be8c3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13784 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12northbridge/intel/i82830: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i830 boards in the chipset. Change-Id: I0a63ddd3c5e43ea65f776385f54eceb6569751ac Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13783 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12nb/amd/mct_ddr3: Consolidate duplicated codeTimothy Pearson
read_dqs_read_data_timing_registers() and read_read_dqs_timing_control_registers() served essentially the same function but had slightly different semantics, causing confusion and needlessly complex Family15h code. Consolidate both into read_dqs_read_data_timing_registers() and adjust surrounding code to match new semantics. Change-Id: I3be808db5d15ceec4c36d17582756b01425df09a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13994 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11northbridge/intel: move mrccache.c of sandybridge + haswell to commonAlexander Couzens
The sourcecode is 99% the same. Only two lines differ, but not in functionality. Also rename mrccache.c -> mrc_cache.c Tested-on: boot + suspend/resume on x220 Change-Id: I36f79d066336f223b608c70c847ea6ea6e4ad287 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14007 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11northbridge/intel: move mrc_cache definition into a common headerAlexander Couzens
The mrc_cache definition and the struct mrc_container are the same over all intel platforms. Change-Id: I128a4b5693d27ead709325c597ffe68a0cc78bab Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/13998 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nortbridge/sandybridge/mrccache: parse the return code of flash->writeAlexander Couzens
Change-Id: I2738da99e4651598faeaa228fba447d0872e9ded Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/13999 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Train correct receiver in TrainDQSRdWrPos_D_Fam15Timothy Pearson
Change-Id: Ia26950a8297f0a7125c21e995c89a3fc68d9d8a9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13932 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Consolidate calls to MCT minimum clock setting fetchTimothy Pearson
Change-Id: I4497b0be6ed6c90dbb31e89013feed8ff5ff9071 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13885 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11nb/amd/mct_ddr3: Require minumum training quality for both read and writeTimothy Pearson
The existing MCT code proceeded to the next DRAM training phase if the minimum lane quality standard passed for either the read or write direction. Ensure that both pass for a given set of delay values before proceeding to the next training phase. Change-Id: I2316ca639f58a23cf64bea56290e9422e02edf1c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13993 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Set read DQS delay to 1UI before calculating read latencyTimothy Pearson
The AMD Family 15h BKDG rev. 3.14 indicates that the maximum read latency must be calculated prior to DQS position training, however the read latency calculations use read DQS delay values that have not been set prior to DQS position training. Set the read DQS delay values to 1UI (i.e worst case) before calculating the read latency prior to DQS position training. Change-Id: I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13995 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>