| Age | Commit message (Collapse) | Author |
|---|
|
The table of initial i440BX register values has a bitmask that allows
preserving certain bits as they are programmed. This feature has been
unused since day one and probably will never be used. So drop it.
Drop DRB, RPS, PGPOL registers from the table as they will be
programmed during RAM init. These two reductions combined saved ~104
bytes.
Drop unneeded SDRAMC "+0".
Slightly compact a comment block.
TEST=Boot tested on asus/p2b-ls, i440bx config did not change
Change-Id: I020f616455bb671fe284993a488beb6386a03d0d
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I2bf1eb87bb5476dd77b5a56dfe8846e82d414523
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40666
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Looks like 5 is a valid system type, as Google Beltino and Slippy are
using it. According to comments on these mainboards' code, this value
corresponds to ULT systems. So, add it to the comment on the pei_data
struct, which was likely copied from Sandy Bridge and was not updated.
Change-Id: I3654bb6022839dba3e1499cf43e8beaa97d1def1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
.acpi_fill_ssdt() does not need to modify the device structure. This
change makes the struct device * parameter to acpi_fill_ssdt() as
const.
Change-Id: I110f4c67c3b6671c9ac0a82e02609902a8ee5d5c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40710
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
.write_acpi_tables() should not be updating the device structure. This
change makes the struct device * argument to it as const.
Change-Id: I50d013e83a404e0a0e3837ca16fa75c7eaa0e14a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Some PCI peripherals, such as discrete VGA adapters, require a great
amount of memory mapped IO. This patch allows the user to select at
build time the bottom IO to leave enough space for such devices.
We cannot calculate this value at runtime because it has to be set
before the PCI devices are enumerated. 0x80000000 has been successfully
boot-tested on A88XM-E (fam15tn), G505S (fam15tn) and AM1I-A (fam16kb).
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ie235631231bcb4aeebaff2e0026da2ea9d82f9d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
The WDB (Write Data Buffer) is a data region in CAR, used as a
scratchpad in the read and write training algorithms of memory
initialization. Both SNB and IVB use this buffer, but HSW does not.
Unlike earlier chipsets, Haswell contains much more in-hardware memory
training machinery, known as REUT (Robust Electrical Unified Testing).
Among other changes, the REUT hardware has a pattern storage buffer,
which renders the need for a pattern storage buffer in CAR obsolete.
Deprecate the WDB-related parameters in the pei_data structure for
Haswell, as they are leftovers from the previous generation's MRC.
Remove them from the mainboards, and explain why they are not required.
Because the MRC ABI has to remain the same, the layout of pei_data must
not be changed, so rename the WDB parameters instead of deleting them.
Tested on Asrock B85M Pro4, still boots with the MRC from Google Wolf.
Change-Id: I7acc9353a22f8c6f9fe6407617162f35849a79dd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
It is not necessary to pass its value around various function calls.
Move it closer to where it is actually used, so as to make it static.
Also, use config_of_soc and flip the branches of the first conditional.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I5c49c943c87218d4d40d3168bd8b7b900b0ec2e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39851
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With this bootblock messages are transmitted over serial too.
TEST=Serial messages transmitted normally on asus/p2b-ls.
Change-Id: I6f3ee68e7c76a8c6db6d75956e6a7fb75ef83850
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add ECC support for native raminit on SandyBridge/IvyBridge.
Change-Id: I1206746332c9939a78b67e7b48d3098bdef8a2ed
Depends-On: I5b7599746195cfa996a48320404a8dbe6820483a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/22215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add support for detection ECC capability and forced ECC mode.
Print the ECC mode in verbose debugging mode.
Change-Id: I5b7599746195cfa996a48320404a8dbe6820483a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/22214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I749be0044be04b044ff82e96aff8093f4b0d295e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I8a1eadcdc51dedd1e17eb6ae7847d9209b2bd598
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
`.read_resources` and `.set_resources` are the only two device
operations that are considered mandatory. Other function pointers
can be left NULL. Having dedicated no-op implementations for the
two mandatory fields should stop the leaking of no-op pointers to
other fields.
Change-Id: I6469a7568dc24317c95e238749d878e798b0a362
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40207
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Providing an explicit no-op function pointer is only necessary for
`.read_resources` and `.set_resources`. All other device-operation
pointers are optional and can be NULL.
Change-Id: I3d139f7be86180558cabec04b8566873062e33be
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40206
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I879dd2fc61bc385486b506e2123f32629a67f518
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use defined structures to assemble IVRS and IVHD entries. Additionally
assemble IVHD type 11h which supersedes IVHD type 10h. In order to
utilize all IOMMU features firmware should also expose IVHD type 11h.
The new type is already supported and parsed since Xen 1.13. IVHD
type 10h should still be present for backwards compatibility.
TEST=boot PC Engines apu2 and disassemble IVRS using newest IASL,
boot Xen 1.13 or newer with debug enabled and see IVRS IVHD 11h parsed
in xl dmesg
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9a2c24b67adfa8ebd718caeb5eec88687dcbcc9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: Id2cb642baa764fd69543460ba869cd822ab5acad
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Unmentioned fields are initialized with 0 (or NULL) implicitly. Beside
that, the struct has grown over the years. There are too many optional
fields to list them all.
Change-Id: Icb9e14c58153d7c14817bcde148e86e977666e4b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40126
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No longer used by southbridge, no longer needed since pineview
doesn't utilize drivers_intel_gma_displays_ssdt_generate()
Change-Id: Ia386f8fcd208e201fb8bc2a37cdbecd6f45a044b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39960
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Simplify generation of GMA SSDT, using updated naming convention.
If acpi_fill_ssdt is being invoked, then we know the IGD device is
present and enabled, so we can skip those checks. And the SSDT
generator now checks that the gfx struct is populated, so we can
skip that too.
Change-Id: Ideddfc3d327c4421faffb6583e347cd2b094e155
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Simplify generation of GMA SSDT, using updated naming convention.
If acpi_fill_ssdt is being invoked, then we know the IGD device is
present and enabled, so we can skip those checks. And the SSDT
generator now checks that the gfx struct is populated, so we can
skip that too.
Change-Id: I68848516fab2058d4aa96ac0342c883fd1df2d6d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Simplify generation of GMA SSDT, using updated naming convention.
If acpi_fill_ssdt is being invoked, then we know the IGD device is
present and enabled, so we can skip those checks. And the SSDT
generator now checks that the gfx struct is populated, so we can
skip that too.
Change-Id: Iacce01ab7d6c220779e84c2b695fbb597b493586
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Simplify generation of GMA SSDT, using updated naming convention.
If acpi_fill_ssdt is being invoked, then we know the IGD device is
present and enabled, so we can skip those checks. And the SSDT
generator now checks that the gfx struct is populated, so we can
skip that too.
Change-Id: I1b6d57c091441aa7431061b1f16135d54cc97b47
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Simplify generation of GMA SSDT, using updated naming convention.
If acpi_fill_ssdt is being invoked, then we know the IGD device is
present and enabled, so we can skip those checks. And the SSDT
generator now checks that the gfx struct is populated, so we can
skip that too.
Change-Id: If34ebe0edc46674244c9d5afc7ed165c2ad685ba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Simplify generation of GMA SSDT, using updated naming convention.
If acpi_fill_ssdt is being invoked, then we know the IGD device is
present and enabled, so we can skip those checks. And the SSDT
generator now checks that the gfx struct is populated, so we can
skip that too.
Change-Id: Icd9caf622dd4c46b13589ebb772138b25888752f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These two identifiers were always very confusing. We're not filling and
injecting generators. We are filling SSDTs and injecting into the DSDT.
So drop the `_generator` suffix. Hopefully, this also makes ACPI look a
little less scary.
Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: David Guckian
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Including gma.asl at the platform level (vs the board level)
means that even desktop boards need to include the default
brightness levels, which makes no sense. To begin to clean this up,
include gma.asl in default_brightness_levels.asl (as well as
the handful of board-specific brightness files) and remove it
from the various platforms.
A follow-on commit will remove default_brightness_levels.asl
from all boards which lack an internal display.
Change-Id: I8063deeef4ab6d6ab34ed9b0be5b1d541d6e9b6b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39878
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will make i945GC and i945GM splitting easier.
Change-Id: I3acc1f526056248f8fbb1778a3c381d369faf020
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Further backport the backlight-PWM handling from Skylake. Beside
configuring the PWM frequency in Hz, we also use the PCH's logic
for the brightness setting via BLM_PCH_OVERRIDE_ENABLE. Linux
would toggle it anyway and that might confuse our ASL code.
We assume that the 183Hz value that was set before for Slippy
variants was overridden by Linux with the 200Hz VBT value, like
it was for the Broadwell Chromebooks. So we set 200Hz for them
in the devicetrees. The calculated value for the T440p of 220Hz
seems sane and also matches the VBT.
Change-Id: I17dfe1a3610d5e2918c617cf5d10896692fdccb3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some commands, like ZQCS and ZQCL, use the same macro. This is because
they differ in things outside of the IOSAV_SP_CMD_CTRL registers. Also,
correct a comment that does not concur with the actual command in use.
With BUILD_TIMELESS=1, the binary of ASUS P8Z77-V LX2 remains identical.
Change-Id: Id2ff4c85f9d9db7c892b764472423cbf2e6db422
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The four CS control signals are grouped into the same nibble.
Change-Id: Iaf8d5216fdca6014be61ae2583fc963d69111571
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It is only for Ivy Bridge, and needs to be set on certain circumstances.
Change-Id: I4093adef44fae787c96fec4b4b8c7c867786d219
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This register is specific to Ivy Bridge. This changes the binary because
the operations get reordered, but it is equivalent.
Change-Id: Ibc9127e0fc268466c13f7c5ac8d942543713ca32
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This changes the binary because the operations get reordered, but it is
otherwise equivalent.
Change-Id: I362187b2889e6f7a68bf752a23c1279cebf961f2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Expand a comment with additional information, and split it in two lines.
Change-Id: I10389a1a575833c8ecc9a79a374c1816000f5667
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It is no longer specific to Ivy Bridge.
Change-Id: I3684e654a1b1aee308e30db739d41cf18e7ea6bd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39790
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Sandy Bridge now uses the same code as Ivy Bridge. Drop the old code.
Change-Id: I4f6a71a4223194d83c0ee790d317ecdcafd664fd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The code for Sandy Bridge is a subset of the code for Ivy Bridge. Adapt
the Ivy Bridge code so that it also supports Sandy Bridge, and use it.
Tested on Asus P8Z77-V LX2, still boots with i7-2600 and i5-3330.
Change-Id: I7b78ec605aff976b9a5cdbb364a69df4b4947c6e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39737
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This field can take eight different values, depending on the maximum
supported speed for the memory when using the 100 MHz reference clock.
Change-Id: I8f2f04f9444831319d4f7bf0d246d01030b6f864
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The code is just clamping the frequency index to a valid range. Do it
with a helper function. Also, add a CPUID check, as Sandy Bridge will
eventually use this code.
Change-Id: I4c7aa5f7615c6edb1ab62fb004abb126df9d284b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
It does not change once a frequency has been set, so store it somewhere.
Since this changes the saved data definition, update MRC_CACHE_VERSION.
As SNB will eventually use the same code, only IVB is being refactored.
Change-Id: I25b7c394abab173241fffdf57ac5c929daad8257
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There is no need to call get_FRQ a dozen times with the same parameters.
As SNB will eventually use the same code, only IVB is being refactored.
Tested on Asus P8Z77-V LX2, still boots with i7-2600 and i5-3330.
Change-Id: Idd7c119b2aa291e6396e12fb29effaf3ec73108a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I048d1906bc474be4d5a4e44b9c7ae28f53b49d5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Instead of adding more versions of the `*pch.asl`, unify the existing
ones and allow to override the register locations via Kconfig. The
current defaults should work for Skylake and some newer platforms.
TEST=Booted ThinkPad X201s, backlight control still works.
Change-Id: I0b21d9a0288f0f8d6cb0a4776909bffdae7576f5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
|
|
The ACPI Spec 2.0 states, that Processor declarations should be made
within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated
and is removed here.
Additionally add processor scope patching for P-State SSDT created by
AGESA, becasue AGESA creates the tables with processors in \_PR scope.
TEST=boot Debian Linux on PC Engines apu2, check dmesg that there are
no errors, decompile ACPI tables with acpica to check whether the
processor scope is correct and if IASL does not complain on wrong
checksum, run FWTS
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I35f112e9f9f15f06ddb83b4192f082f9e51a969c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39698
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The timing tables for Sandy Bridge are a subset of Ivy Bridge's tables.
Move the latter to a common place, and use it for both generations.
Tested on Asus P8Z77-V LX2 with an i7-2600 and an i5-3330, both work.
Change-Id: Id14227febf4eebb8a2b4d2d4f37759d0f42648c6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39735
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Note that pei_data.h uses the BSD 3-Clause license:
https://opensource.org/licenses/BSD-3-Clause
Change-Id: I904b343283239af4fdee583bcbea757f59a0cca7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I95964ac6b5939f66c40bd56939bdf532a72d75ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Northbridge IOAPIC was not being initialized which caused its APIC ID to
be set to 0 (the same APIC ID as BSP).
TEST=boot Debian Linux on PC Engines apu2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Id06ad4c22a56eb3559e1d584fd0fcac1f95f13e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Now that we have it, we might as well pass it around.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: Ia5aa2f932321983f11d2f8869aa624832afe9347
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39721
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Native raminit asserts that the DIMMs haven't been replaced before
reusing the saved training data. However, it does not check if the CPU
is still the same, so it can end up happily reusing data from an Ivy
Bridge CPU onto a Sandy Bridge CPU, which runs the raminit_ivy.c code
path. This can make the CPU run in unsupported configurations, which may
result in an unstable system, or a failure to boot.
To prevent that, ensure that the stored CPUID matches the CPUID of the
installed CPU. If they differ, print a message and do not use the saved
data. As it does not pose a problem for a regular boot, but precludes
resuming from S3, use different loglevels depending on the bootpath.
Tested on Asus P8Z77-V LX2 with an i7-2600 and an i5-3330, works well.
Change-Id: Ib0691f1f849b567579f6afa845c9460e14f8fa27
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of storing an int with a single bit of information taken from
the CPUID, we might as well store the actual CPUID. And since we are
changing the definition of the saved data, bump the version number.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: I6ac435fb83900a52890f823e7614055061299e23
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39720
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When changing any of the structures that are cached in non-volatile
storage, it is necessary to bump MRC_CACHE_VERSION so that the old
information is not misinterpreted.
Change-Id: Idefbc38b3a8198b1b5909e775b3c289db689fc0c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39756
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If99fd6511fcea474a1398d2b680e0df4bb1a229b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39755
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Header files are supposed to not make allocations from .bss. Builds
fail if said file is included multiple times. To prevent this from
happening, move the definitions to a C file.
Also, rename raminit_patterns to raminit_tables. This is because more
tables that are not patterns will be added here in subsequent changes.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: If8e3a285ecdc4df9e978ae156be915ced6e1750b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39754
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make them fit in 96 characters, so that Jenkins does not complain.
With BUILD_TIMELESS=1, the binary of ASUS P8Z77-V LX2 remains identical.
Change-Id: I4a763f6050593e9d4db9211bfeedb442724e1ace
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39719
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ACPI Spec 2.0 states, that Processor declarations should be made
within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated
and is removed here for Intel CPUs only.
Tested on:
* X11SSH (Kabylake)
* CFL Platform
* Asus P8Z77-V LX2 and Windows 10
FWTS does not return FAIL anymore on ACPI tests
Tested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: Ib101ed718f90f9056d2ecbc31b13b749ed1fc438
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
According to BKDGs these northbridges should support the K10
compatible temperature sensors.
TEST=boot FreeBSD on PC Engines apu2 and check the thermal zone
temperature using sysctl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Icbdf44508085964452d74e084b133f1baa39e1a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
According to BKDGs HTC temperature limit field indicates the threshold
where HTC becomes active. HTC active state means that processor is
limiting its power consumption and maximum P-State. Using this threshold
as _CRT is incorrect, since HTC active is designed to prevent
overheating, not causing immediate shutdown.
Change the behavior of temperature limit to act as a passive cooling
threshold. Make the passive cooling threshold a reference value for
critical and hot temperature with 5 degrees step.
TEST=boot FreeBSD on PC Engines apu2 and check the thermal zone
temperature using sysctl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ife64c3aab76f8e125493ecc8183a6e87fb012e3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Fixes a blunder in commit 50db9c99be7e09aafb7cfd353bd0ac9878b76fca
(nb/intel/sandybridge: Use DIV_ROUND_UP macro to select timings).
Tested on Asus P8Z77-V LX2, still boots fine with an i7-2600.
Change-Id: I73436b9f7df9f3a065469fb89bcd0cc6183bb774
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I487fb53bb2b011d214f002fc200ade2f128a4cc6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
It does not make sense to disable an optimization that was not enabled
before, especially if that optimization only applies to Ivy Bridge.
Tested, still boots and can suspend correctly with:
- Asus P8Z77-V LX2 with i5-3330 and Windows 10
- Gigabyte GA-H61MA-D3V with i5-2400 and Arch Linux
Change-Id: I9f3eb545585824bbdf51e33f0592e7daa1c425af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use the version from native raminit, as it takes the reference clock
into account.
Change-Id: I00e979bec236167d22561e3eb44b30b4a34ad663
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39622
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This register needs to be written to once to lock it down. Do so.
Change-Id: I04bd496d064940b51cb9aa1ded6f5b8853ea7334
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39624
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DMI link consists of four lanes, grouped in two bundles. Therefore,
some DMI registers may be organized as "per-lane" or "per-bundle". This
can be seen in the DMI initialization sequence as series of equidistant
offsets being programmed with the same value. Make this more obvious by
factoring out the register groups using loops.
With BUILD_TIMELESS=1, the binary of ASUS P8Z77-V LX2 remains identical.
Change-Id: Iebf40b2a5b37ed9060a6660840ea6cdff7eb3fc3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
- Reformat some lines of code
- Move MCHBAR registers and documentation into a separate file
- Add a few missing macros
- Rename some registers
- Rewrite several comments
- Use C-style comments for consistency
- Rewrite some hex constants
- Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0)
With BUILD_TIMELESS=1, this commit does not change the result of:
- Asus P8Z77-V LX2 with native raminit.
- Asus P8Z77-M PRO with MRC raminit.
Change-Id: I6e113e48afd685ca63cfcb11ff9fcf9df6e41e46
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39599
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I89b10076e0f4a4b3acd59160fb7abe349b228321
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39611
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use De Morgan’s law to simplify the condition by getting rid of the
negations.
TEST=With `make BUILD_TIMELESS=1` getac/p470 remains unchanged.
Change-Id: I041f2740d6991f9b4e6b8f77988b970c028ca512
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
- Reformat some lines of code
- Put names to all MCHBAR registers in a separate file
- Rewrite several comments
- Use C-style comments for consistency
- Rewrite some hex constants
- Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0)
- Align a bunch of things
Tested with BUILD_TIMELESS=1, foxconn/d41s remains unaffected.
Change-Id: I29104b0c24d66c6f49844f99d62ec433bb31bdaf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The code in coreboot is actually for the Arrandale processors, which
are a MCM (Multi-Chip Module) with two different dies:
- Hillel: 32nm Westmere dual-core CPU
- Ironlake: 45nm northbridge with integrated graphics
This has nothing to do with the older, single-die Nehalem processors.
Therefore, replace the references to Nehalem with the correct names.
Change-Id: I8c10a2618c519d2411211b9b8f66d24f0018f908
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38942
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code is for Arrandale CPUs, whose System Agent is Ironlake.
This change simply replaces `nehalem` with `ironlake` and `NEHALEM`
with `IRONLAKE`. The remaining `Nehalem` cases are handled later, as
changing some of them would impact the resulting binary.
Tested with BUILD_TIMELESS=1 without adding the configuration options
into the binary, and packardbell/ms2290 does not change.
Change-Id: I8eb96eeb5e69f49150d47793b33e87b650c64acc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38941
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I465a68f281534cd9fc5a7bde02c32d1353cfdaed
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I35d14541e0eab4474b03a9d2f114c7aa3e92918c
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
- Reformat some lines of code
- Put names to all used MCHBAR registers
- Move MCHBAR registers into a separate file, for future expansion
- Rewrite several comments
- Use C-style comments for consistency
- Rewrite some hex constants
- Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0)
Tested, it does not change the binary of Asrock B85M Pro4.
Change-Id: I926289304acb834f9b13cd7902801798f8ee478a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38434
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Per Mobile Intel ® 945 Express Chipset Family - Specification Update
Document Number: 309220-013 (page 15), the power saving optimization
Erratum is for Mobile Intel ® 945 Express Chipset family.
So rename 'fixup_i945_errata()' to 'fixup_i945gm_errata()' and apply
that function only for I945GM.
Change-Id: I2656021b791061b4c22c0b252656a340de76ae5e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I7dd6dd8e8debe1b6419625fca38670be375ef581
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I942457a820a59428f7ae302262c4891a4c5ef1a6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37520
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a port of https://review.coreboot.org/c/coreboot/+/22337 to the
Haswell northbridge. This code is necessary to support the dGPU of the
t440p. Code was cut and pasted from Sandy Bridge with vendor IDs updated
to the correct Haswell values. Tested on t440p with dGPU on Ubuntu
18.04.4 with 5.3.0-28 kernel. Without patches dmesg reports Nouveau is
unable to read the VBIOS of the dGPU as it has an invalid checksum (I
checked that the ROM in CBFS is correct). With this patch DRM works
correctly with both the Nouveau driver and the Nvidia proprietary
driver. Windows 10 1909 also tested but generates bluescreen once GPU
driver is loaded.
Change-Id: Ie5f089fb6fd774e6c61f4f9281e2945bd44edf27
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Some local functions need renaming to avoid name collision.
Change-Id: I0ca311c12f013e54e23ff0427421bfad0b747ea6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37195
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
"amdfam10" is no more.
Change-Id: Ibf4892bb4076eb88b864fc0e894b986bf6f6e5bf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38054
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The VBOOT code can be compiled but it asserts with:
ASSERTION ERROR: file 'src/security/vboot/common.c', line 40
Start VBOOT in bootblock to fix the assertion.
Tested on Lenovo X220:
The assertion is gone, the platform boots again.
Change-Id: I48365e911b4f43aecba3b1f950178b7ceed5b2e9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I1d36e554618498d70f33f6c425b0abc91d4fb952
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38928
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia05cb2de1b9f2a36fc9ecc22fb82f0c14da00a76
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Previously the PRTs were defined in southbridge code (8014714
southbridge/intel/bd82x6x/acpi: Fix IRQ warnings), but this was lost
when southbridge PRTs became autogenerated. Add the proper PRTs for the
PCI express for graphics root ports.
This (again) fixes warnings issued by Linux for interrupts on secondary
functions of devices on the PEG ports, such as the HDMI audio controller
on graphics cards.
pcieport 0000:00:01.0: can't derive routing for PCI INT B
snd_hda_intel 0000:01:00.1: PCI INT B: no GSI
Tested with GIGABYTE P67A-UD3R (CB:31363) with Radeon HD 5670.
Change-Id: Ic429ec2fdeadb9dab1c03916974e173004d6cd16
Signed-off-by: James Ye <jye836@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I70187d09ecdaa8149299cdd8f6f8fc9517b05e15
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ida311a7b0c1f33b1724a07c7cd64ea9834cfc179
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38882
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable Access Control Services and Advanced Error Reporting for PCI Express
bridges in order to have PCIe devices in separate IOMMU groups for correct
passthrough.
TEST=run dmesg on Debian Buster on PC Engines apu2 and check whether PCIe
devices have separate groups
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I10a8eff0ba37196692f9db6519e498fe535ecd15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ia0d7d5ecf376af97ee54ff3ca536160202e43f79
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I5d00fb238be6399ea6e9f394d8f899b03b1d44cf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Calculate the correct MMCONF size, which was only correct for
256MiB, but not for smaller values.
Tested on HP Z220:
Fixes "Not using MMCONF" warning in dmesg.
Change-Id: I986681126637c28f6442ab7c34acea5bb58ea3d2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathan Kollasch <jakllsch@kollasch.net>
|
|
* Use new ACPI syntax
* Return either 0 or 0xf for PCI root port. That will make the
device show up in Windows. This might help users and possibly
Windows drivers working with PCIe ports.
Change-Id: I1e76b735ab1472f6a4ea493c733cd6b2e6fca29e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The type of dev in the PCI_FUNC(dev) is incorrect. Fix it using
PCI_DEV2DEVFN() macro. Tested on a T440P, and necessary on this board
to enable the dGPU.
Change-Id: I3fb0f677cc98800f355f6af7d3172be3e59ce5c2
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38722
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the multiplications with corresponding shifts, so that it's
easier to see at which bit offsets the values get assigned.
Change-Id: I0b0d5172394ff65edfe57bdad474631938e58872
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It's symmetric to the code found in 00730F01 northbridge.
Change-Id: I1ee439213ff128b534f5bf130661d0ae2b9558ab
Signed-off-by: Jorge Fernandez <jorgefm@cirsa.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37547
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I932bd0cb97507fa159d1fe3cf2335beb31ca1caf
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Types from stdint.h are used in that header file without stdint.h being
included.
Change-Id: I71449dd26162dc8420c206285896ac9a8e4e04d4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The two defines are identical, so deduplicate this.
Timeless build for lenovo/x230 results in identical binary.
Change-Id: I32e0eee88d72eb6f8dc71b0324d62f46079120a9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Drop DRAMT write as it's only rewriting the power on default.
PMCR write is required. Update comment on its purpose and move to
end of sdram_enable().
Change-Id: I62e8b2531f0f297ffb7db440db89ffa65771b7d5
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I27b2fcf6fea18e03dddb015eb017acc5db1db540
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
