summaryrefslogtreecommitdiff
path: root/src/northbridge
AgeCommit message (Expand)Author
2010-01-27Add the MSR writes that are needed to provide VGA legacy routing for the Geod...Edwin Beasant
2010-01-27Change memory map of geode lx: 768kb-systop is aEdwin Beasant
2010-01-26Mark c0000-fffff as usable on geode-lx. SeaBIOS needs it.Edwin Beasant
2010-01-25This code was copied from amdk8 and never really made usable. Stefan Reinauer
2010-01-17Support a few more i945 variants. With this framework in place it shouldStefan Reinauer
2010-01-16coreboot has 13 instances of IOAPIC setup distributed across a lotStefan Reinauer
2010-01-16coreboot used to have two different "APIs" for memory accesses:Stefan Reinauer
2010-01-16* drop reset files from 945 mainboards (and use southbridge specific reset)Stefan Reinauer
2010-01-06Move fam10 temp files from build/ to build/northbridge/amd/amdfam10/ Trivial.Myles Watson
2010-01-06Fix amdht on newer compilers.Patrick Georgi
2009-12-31romcc:Patrick Georgi
2009-11-28Maciej Pijanka tried to get the Biostar M6TLD running, and created a patch forMaciej Pijanka
2009-11-18Update amdk8/util.c since __PRE_RAM__. Make node & link more unique.Myles Watson
2009-11-06Remove drivers/pci/onboard. The only purpose was for option ROMs, which areMyles Watson
2009-11-06Split the two usages of __ROMCC__:Myles Watson
2009-11-05Add debugging utility file for dumping routing registers on K8.Myles Watson
2009-10-30Allow per-northbridge and per-board VGA BIOS file name and PCI ID defaults.Uwe Hermann
2009-10-30Remove some warnings from the tyan s2895.Myles Watson
2009-10-28Drop remainders of PPC portStefan Reinauer
2009-10-27Improve coreboot build output and eliminate some warnings:Uwe Hermann
2009-10-26Add kconfig menus for most chipset VIDEO_MB values.Uwe Hermann
2009-10-26Kontron 986LCD-M updateStefan Reinauer
2009-10-26Define some variables that were not defined. There are a couple left.Myles Watson
2009-10-24Trivial regrouping of a calculation to simplify it.Myles Watson
2009-10-24Fix K8 boards high tables on UMA systems (KT690 for example)Stefan Reinauer
2009-10-23Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses beforeMyles Watson
2009-10-23Remove PRINTK_IN_CAR tests from AMD files.Myles Watson
2009-10-20When I converted an #ifdef to an #if it broke the code because the variable wasMyles Watson
2009-10-19Clean up some #ifdef CONFIG_*Myles Watson
2009-10-18Simplify Kconfig files by using "select" where possible (trivial).Uwe Hermann
2009-10-18Drop dead/unused code (trivial).Uwe Hermann
2009-10-16Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE.Myles Watson
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
2009-10-14Fix high tables address calculation on cn700 with VIDEO_MB > 0.Myles Watson
2009-10-14White space and typo fixes. This makes it easier to compare the s2895 & s2892.Myles Watson
2009-10-12Make fam10 build (but not boot due to bootblock size problems.)Myles Watson
2009-10-09Add const to get rid of some warnings when passing quoted strings.Myles Watson
2009-10-09Remove default n statements to simplify .config and ldoptions files.Myles Watson
2009-10-08Disable x86emu for via based boards which bringPatrick Georgi
2009-10-08More kconfig:Patrick Georgi
2009-10-04Add initial kconfig support for all AMD GX1 boards.Uwe Hermann
2009-10-03Tell vgabios code in a couple of boards/chipsets about CBFSPatrick Georgi
2009-10-01Add some trivial numbers for 945, and Core2 Duo E8200 Intel partsPeter Stuge
2009-10-01Fix Kconfig build for K8 boards.Myles Watson
2009-09-29Make CONFIG_HAVE_HIGH_TABLES consistent in where and how it is set.Myles Watson
2009-09-29Remove some warnings.Myles Watson
2009-09-29More consistent use of "default n" and "select XYZ" inPatrick Georgi
2009-09-25some progress on kconfig:Patrick Georgi
2009-09-24Remove HyperTransport support from boards that don't need it.Myles Watson
2009-09-24Make all Kconfig enabled boards build (tested with kbuildall).Patrick Georgi
2009-09-23fix some wrong versions of the FSF's address (trivial)Stefan Reinauer
2009-09-23simplify source tree hierarchy: move files from sdram/ and ram/ to lib/Stefan Reinauer
2009-09-22tables.diff: Add Kconfig dialogues for ACPI, MP_TABLE, ...Myles Watson
2009-09-14Use the coreboot pci config read/write functions instead of direct cf8/cfcMarc Jones
2009-08-29This is the final set of changes to allow rumba to build. Rumba is notRonald G. Minnich
2009-08-29Fixes per Uwe's comments.Ronald G. Minnich
2009-08-28This patch adds VGA and PS/2 Keyboard/mouse support to the already existing i...Arnaud Maye
2009-08-28This is the beginning of support for Geode and Kconfig in v2. Ronald G. Minnich
2009-08-26Remove a couple of CONFIG_ prefixes that shouldn't have happened.Patrick Georgi
2009-08-25Add kconfig support for ASUS P2B-F.Uwe Hermann
2009-08-25Without this patch, if we only got a DIMM in Channel B, memory can not beZheng Bao
2009-08-25Various Kconfig and Makefile.inc fixes and cosmetics.Uwe Hermann
2009-08-24This patch is about the DA-C2 and RB-C2. Chip with install processorZheng Bao
2009-08-20This goes a surprisingly long way to building the epia-n. It also hasRonald G. Minnich
2009-08-19The Errata350 is "Write 0000_8000h to register F2x[1, 0]9C_xD080F0C.", instea...Zheng Bao
2009-08-18Correct usage of Makefile.inc and add support for cn400Ronald G. Minnich
2009-08-18Add the rest of the files.Jon Harrison
2009-08-17Get the Via EPIA-N(L)/CN400 to a reasonable level of maturity::Jon Harrison
2009-08-13Fix some conflicting types of variablesPatrick Georgi
2009-08-12drop extra whitespace at end of line for i945 + ICH7 (trivial)Stefan Reinauer
2009-08-12This now builds. Ronald G. Minnich
2009-08-12Kconfig!Patrick Georgi
2009-07-22Fix up the tree again...Stefan Reinauer
2009-07-21* drop ich7 includeStefan Reinauer
2009-07-21Remove a comment that no longer applies. Trivial.Myles Watson
2009-07-17This is an obvious bug which I overlooked when I worked on the AM2r2Zheng Bao
2009-07-07Add pci_rawops.h from the mailing list and fix the via/epia-m700 build.Myles Watson
2009-07-07Add the IORESOURCE_BRIDGE flag to the fam10 resources for the benefit of the ...Myles Watson
2009-07-05Fix build for i810 boards that don't enable onboard VGA, yet.Uwe Hermann
2009-07-05Various Intel 82810/82810E changes which allow onboard VGA to work.Elia Yehuda
2009-07-02Fix many things for via/epia-m700 to build.Myles Watson
2009-07-02Update the k8 code for the v3 resource allocator.Myles Watson
2009-07-02Move the v3 resource allocator to v2.Myles Watson
2009-07-01Add support for the Intel Eagle Heights development board.Thomas Jourdan
2009-07-01Ron,Jon Harrison
2009-07-01Add AMD family 10 AM2r2 support.Zheng Bao
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
2009-06-21This patch adds a proper namestring generation to our ACPIgen generator.Rudolf Marek
2009-06-19Convert the MSI MS-6178 board to CBFS.Uwe Hermann
2009-06-09this port is horribly broken and should not have been checked in. This patchStefan Reinauer
2009-06-06Fix for Erratum 350 for AMD Fam10h CPUs.Marco Schmidt
2009-06-05Fix non-revF K8 ram init compilation which was broken in r4341.Carl-Daniel Hailfinger
2009-06-05K8 RAM init debug messages are pretty short and sometimes cryptic. MakeCarl-Daniel Hailfinger
2009-06-05Add a hopefully more correct and flexible set_dram_buffer_strength()Elia Yehuda
2009-06-04The point of the patch is to make it easier to understand the raminitMyles Watson
2009-06-03Revert "CMOS: Add set_option and rework get_option."Luc Verhaegen
2009-06-03CMOS: Add set_option and rework get_option.Luc Verhaegen
2009-05-27First batch of indent-aided code cleanups, more will follow.Uwe Hermann
2009-05-27Make directory hierarchy flat to match the same layout we useUwe Hermann
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 13:09:44 +0000