summaryrefslogtreecommitdiff
path: root/src/northbridge
AgeCommit message (Collapse)Author
2016-03-11northbridge/intel: move mrccache.c of sandybridge + haswell to commonAlexander Couzens
The sourcecode is 99% the same. Only two lines differ, but not in functionality. Also rename mrccache.c -> mrc_cache.c Tested-on: boot + suspend/resume on x220 Change-Id: I36f79d066336f223b608c70c847ea6ea6e4ad287 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14007 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11northbridge/intel: move mrc_cache definition into a common headerAlexander Couzens
The mrc_cache definition and the struct mrc_container are the same over all intel platforms. Change-Id: I128a4b5693d27ead709325c597ffe68a0cc78bab Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/13998 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nortbridge/sandybridge/mrccache: parse the return code of flash->writeAlexander Couzens
Change-Id: I2738da99e4651598faeaa228fba447d0872e9ded Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/13999 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Train correct receiver in TrainDQSRdWrPos_D_Fam15Timothy Pearson
Change-Id: Ia26950a8297f0a7125c21e995c89a3fc68d9d8a9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13932 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Consolidate calls to MCT minimum clock setting fetchTimothy Pearson
Change-Id: I4497b0be6ed6c90dbb31e89013feed8ff5ff9071 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13885 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11nb/amd/mct_ddr3: Require minumum training quality for both read and writeTimothy Pearson
The existing MCT code proceeded to the next DRAM training phase if the minimum lane quality standard passed for either the read or write direction. Ensure that both pass for a given set of delay values before proceeding to the next training phase. Change-Id: I2316ca639f58a23cf64bea56290e9422e02edf1c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13993 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Set read DQS delay to 1UI before calculating read latencyTimothy Pearson
The AMD Family 15h BKDG rev. 3.14 indicates that the maximum read latency must be calculated prior to DQS position training, however the read latency calculations use read DQS delay values that have not been set prior to DQS position training. Set the read DQS delay values to 1UI (i.e worst case) before calculating the read latency prior to DQS position training. Change-Id: I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13995 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Properly initialize arrays and add bounds checksTimothy Pearson
A couple of arrays were not properly initialized. This did not appear to affect operation of the codebase however it led to some ugly values being displayed when debugging was turned on. Also bounds check an array index; as before this did not appear to affect operation but was a potential point of failure. Change-Id: I243b7197a74aed78ddca808eb3b0f35f1fe9d95a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13934 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Restore previous DQS delay values on failed loopTimothy Pearson
Change-Id: Iacfcd7f379d09a633973b4c3ef3cbb97e6d1f09f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13931 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11northbridge/i945/gma: Re-enable NVRAM tft_brightnessAlexander Couzens
Commit 71512b2c (northbridge/i945/gma: fix build error with native graphics init) unintentionally changed the code to ignore the NVRAM setting `tft_brightness`. Revert that hunk to restore the original behavior. Change-Id: Iffdfc5272732bad3476f35ddac1f5a7564270531 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14002 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-10northbridge/intel/i440bx: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i440BX boards in the chipset. Change-Id: I411191927f3fba1d0749edcf79378e8013fb195a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13781 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-09northbridge/intel/gm45: Use TSC for ramstage timer per defaultStefan Reinauer
This is a step towards isolating the timer drivers. Change-Id: I4c9349054be0cf520cd4407be9fb393b664223a4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13922 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-05sandybridge/gma_lvds: support both Sandy&Ivy on one boardIru Cai
Sandy and Ivy Bridge processors use the same socket, and a mainboard with the socket can support both types of CPUs. However, they use different native graphics init code for LVDS and cause a crash if running the wrong code. This change detects the CPU type and then selects the right code to run. It will add some more code in ramstage. It also merges the {SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS. Tested on a Lenovo T520 with i7-2630qm and i7-3720qm Signed-off-by: Iru Cai <mytbk920423@gmail.com> Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91 Reviewed-on: https://review.coreboot.org/12087 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2016-03-03nb/intel/sandybridge/raminit: Fill SMBIOS type17 infoPatrick Rudolph
Fill minimal info required for SMBIOS type 17. Report * DIMM size * channel * rank per DIMM * speed in Mhz * DIMM type * slot * manufacturer ID * serial Allows dmidecode to print the current RAM configuration. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 * Linux 4.3 * dmidecode 3.0 dmidecode output: Handle 0x0005, DMI type 17, 40 bytes Memory Device Array Handle: 0x0000 Error Information Handle: Not Provided Total Width: 16 bits Data Width: 8 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR3 Type Detail: Synchronous Speed: 1600 MHz Manufacturer: Unknown (cd04) Serial Number: None Asset Tag: Not Specified Part Number: F3-1866C9-8GSR Rank: 2 Configured Clock Speed: 1600 MHz Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Handle 0x0006, DMI type 17, 40 bytes Memory Device Array Handle: 0x0000 Error Information Handle: Not Provided Total Width: 16 bits Data Width: 8 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: Channel-1-DIMM-1 Bank Locator: BANK 0 Type: DDR3 Type Detail: Synchronous Speed: 1600 MHz Manufacturer: Unknown (cd04) Serial Number: None Asset Tag: Not Specified Part Number: F3-1866C9-8GSR Rank: 2 Configured Clock Speed: 1600 MHz Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Change-Id: I4e5f772d68484b9cb178ca8a1d63ad99839f3993 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13852 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02nb/intel/sandybridge/romstage: Read fuse bits for max MEM ClkPatrick Rudolph
Instead of hardcoding the maximum supported DDR frequency to 800Mhz (DDR3-1600), read the fuse bits that encode this information. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: I515a2695a490f16aeb946bfaf3a1e860c607cba9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13487 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02nb/intel/sandybridge/raminit: Make discover_timC_write non cyclicPatrick Rudolph
The code can't handle cyclic zero runs. Make sure it will never wrap around by setting the top-most bit to constant one. Fixes "Mini channel test failed (2)". Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Change-Id: I55e610d984d564bd4675f9318dead6d6c1e288a3 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13853 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-28northbridge/intel: add missing #include guardsIru Cai
I first found the missing of #include guards when I tried to include both sandybridge/gma.h and sandybridge/sandybridge.h, but sandybridge.h includes gma.h in it and gives a compile error. Change-Id: I13fdb8014b82e6065be2064137b7ea10062deaca Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/13775 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-02-26nb/intel/sandybridge/raminit: Adjust timB to prevent overflowPatrick Rudolph
Improved version of I1a115a45d5febf351d89721ece79eaf43f7ee8a0 The first version wasn't well tested due to the lack of hardware and it was to aggressive. With timC being direct function of timB's 6 LSBs it's critical to match timC and timB. Some tests increments the value of timB by a small value, which might cause the 6bit value to overflow, if it's close to 0x3F. Increment the value by a small offset if it's likely to overflow, to make sure it won't overflow while running tests and bricks the system due to a non matching timC. In comparission to the first attempt, only 4 out of 128 timB values are considered bad. Needs test on real hardware ! Fixes a "edge write discovery failed" on my test system. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: If9abfc5f92e20a8f39c6f50cc709ca1cedf6827d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-26tree wide: Convert "if (CONFIG_.*_TPM.*)" to "if (IS_ENABLED(...))"Denis 'GNUtoo' Carikli
Change-Id: Ib73abb0ada7dfdfab3487c005719e19f51ef1812 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/13779 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-20nb/intel/sandybridge/raminit: Add XMP supportPatrick Rudolph
Some vendors store lower frequency profiles in the regular SPD, if the SPD contains a XMP profile. To make use of the board's and DIMM's maximum supported DRAM frequency, try to parse the XMP profile and use it instead. Validate the XMP profile to make sure that the installed DIMM count per channel is supported and the requested voltage is supported. To reduce complexity only XMP Profile 1 is read. Allows my DRAM to run at 800Mhz instead of 666Mhz as encoded in the default SPD. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Change-Id: Ib4dd68debfdcfdce138e813ad5b0e8e2ce3a40b2 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13486 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-19nb/amd/amdmct: Add socket specific configuration for FM2Damien Zammit
Change-Id: I1088064e5f84fcabcd51e0eaaedfb5074f7fb2b5 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13709 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-02-19nb/intel/sandybridge/raminit: Improve loggingPatrick Rudolph
Use printram() in more places and use printk() only where it makes sense. Remove spamming "MRd: %x <= %x\n". Use common syntax for timing output. Change-Id: I38965967a029994112d7ab63afd4d9968a7728c5 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13414 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18nb/intel/sandybridge: Start PEG link trainingPatrick Rudolph
Issue observed: The PCIe Root port shows up in GNU/Linux but no PCIe device is being detected. Test system: * Gigabyte GA-B75M-D3H (Intel Pentium CPU G2130) * Lenovo T530 (Intel Core i5-3320M CPU) Problem description: The PEG Root port link training on Ivy Bridge needs to be manually started. Problem solution: The bits are set in early_init to meet PCIe reset timeout of 100msec. The bits should be set in PCI device enable function, but this causes the PCI enumeration to not detect the card, as it's still booting. Adding a fixed delay of 100msec resolves this problem, but this would increase boot time. Read the PCI base revision mask to make sure it's any IvyBridge CPU. Don't run the code on MRC path as it has its own PEG initilization code. Tested with: * Nvidia NVS 5400M (PCIe2) * ATI Radeon HD4780 (PCIe2) * Nvidia GeForce 8600 GT (PCIe1) Untested: * PCIe3 devices Final test results: The PEG device shows up under GNU/Linux and can be used without issues. Change-Id: Id8cfc43e5c4630b0ac217d98bb857c3308e6015b Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/11917 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18southbridge/intel/bd82x6x: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder. Bd82x6x's gpio.c and gpio.h is used by other southbridges as well and will be removed once it is unused. Change-Id: I8bd981c4696c174152cf41caefa6c083650d283a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13614 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-16nb/intel/sandybridge/raminit: Add shift offsetPatrick Rudolph
It looks like the falling timing was missing the shift offset. Not sure if this was intentional, I guess not. Tested on my hardware and produced no regressions. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Please test on real hardware ! Change-Id: Id8c60217093a48bf322f406ea258c10a02c936e8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13682 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-13sandybridge: Always include MRC if not using native RAM init.Vladimir Serbinenko
Otherwise the image is simply unusable. Change-Id: I1e2562ba17279d14dc73b05e4f8fa493e06fbcd2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13699 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-12Make MRC vs native a config rather than making a separate chipset for it.Vladimir Serbinenko
Tested by making lenovo x230 configurable despite pretty MRC bugs. Change-Id: Ia2a123f24334f5cd5f42473b7ce7f3d77c0e65b7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13658 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Merge sandy/ivybridge romstage flow for MRC and non-MRC.Vladimir Serbinenko
Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13656 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10Kconfig: Move defaults for CBFS_SIZEMartin Roth
We want the question for CBFS size to be next to the rom size in the mainboard directory, but that doesn't seem to work for how people want to set the defaults. Instead of having the list of exceptions to the size, just set the defaults at the end of kconfig. - Move the defaults for chipsets not setting HAVE_INTEL_FIRMWARE into the chipset Kconfigs (gm45, nehalem, sandybridge, x4x) - Override the default for HAVE_INTEL_FIRMWARE on skylake. - Move the HAVE_INTEL_FIRMWARE default setting into the firmware Kconfig file - Move the location of the default CBFS_SIZE=ROM_SIZE to the end of the top level kconfig file, while leaving the question where it is. Test=rebuild Kconfig files before and after the change, verify that they are how they were intended to be. Note: the Skylake boards actually changed value, because they were picking up the 0x100000 from HAVE_INTEL_FIRMWARE instead of the 0x200000 desired. This was due to the SOC_INTEL_SKYLAKE being after the HAVE_INTEL_FIRMWARE default. Affected boards were: Google chell, glados, & lars and Intel kunimitsu. Change-Id: I2963a7a7eab037955558d401f5573533674a664f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13645 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-09sandybridge: Set all native gfx-related options in northbridge code.Vladimir Serbinenko
In the same time remove few native gfx options which were improperly set and only added dead code to the binary. Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13649 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-09ivy: Add a possiblity for mainboard early init.Vladimir Serbinenko
This is needed for stout EC init. Change-Id: I5c73499c17763229840152a473a2d820802ee2f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13535 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09Revert "northbridge/intel/peg: Disable unused ports"Nico Huber
This reverts commit 0e06f5bd70b45fd330d8dfb1dc77cce043caf841. It breaks gm45 and also does some magic without being asked too. It disables bridge devices permanently if no device was found on the se- condary bus. In a simple notebook world this might be ok, but it breaks hot-plugging and late detection (if a secondary bus device comes up too slow for the firmware to detect and the OS has to enumerate it). Change-Id: Ia2010640d7c55b0bdd44164b81c75dd4be50410b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/13609 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-02-05nb/amd/mct_ddr3: Fix RDIMM training failure on Fam15hTimothy Pearson
Certain registered DIMMs failed training due to an error likely introduced during historical rebase. Ensure that the SubMemclkRegDly bit is set according to BKDG recommendations on Family 15 processors. Change-Id: I24c95265dada9eabf4df280b6f2b4a1eb9cecaf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13148 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05nb/amd/mct_ddr3: Work around RDIMM training failureTimothy Pearson
Under certain conditions, not elucidated in the BKDG, an extra memclock of CAS write latency is required. The only reliable way I have found to detect when this is required is to try training without the delay, and if DQS position training fails, adding the delay and retraining. This is probably related in some form or another to the badly broken DQS Write Early algorithm given in the BKDG. Change-Id: Idfaca1b3da3f45793d210980e952ccdfc9ba1410 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13531 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04northbridge/intel/peg: Disable unused portsPatrick Rudolph
Walk the bus and try to find enabled devices. Disable the PEG port if no devices are attached. Change-Id: I67fcc831fd78ecc6dba83f4e0662ec7549cc2591 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12894 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04nb/intel/sandybridge/raminit: Fix two dimms per channelPatrick Rudolph
Issue observed: The system boots with 4G in channel 0 and 4G in channel 1. The system doesn't boot with any combination of 4G + 1G in channel 0 and 4G in channel 1. In both cases DIMM1 failed, while DIMM0 showed no issues. Problem description: The CLK to CMD/CTL was off by a half clock cycle. The find the issue I X-Y plotted timC vs timB for every lane on the failing rank. You can see an offset by 32 units for timB, that is not present on other ranks. It turns out that the XOVER CMD/XOVER CTL enable bit for DIMM1 was missing in program_timings(), which caused the clock offset. Problem solution: Add two functions to calculate XOVER CMD and XOVER CTL and use both to set XOVER in program_timings() and dram_xover(). Final testing result: The system boots with 4G + 1G in channel 0 and 4G in channel 1. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: I88694c86054ade77e9d8bb2f1fdaf7bc559c1218 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13415 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-02src: Fix various spelling and whitespace issues.Martin Roth
This fixes some spelling and whitespace issues that I came across while working on various things in the tree. There are no functional changes. Change-Id: I33bc77282f2f94a1fc5f1bc713e44f72db20c1ab Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13016 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-01nb/amd/amdmct/mct_ddr3: Save and restore SkewMemClk for S3 resumeTimothy Pearson
Change-Id: Ib331bd330530d4d6be5eb7351d9f9b15c135dd63 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13167 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01drivers/pc80: Add PS/2 mouse presence detectTimothy Pearson
On certain Winbond SuperIO devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. Add auxiliary channel PS/2 device presence detect, and update the Winbond W83667HG-A driver to flag the auxiliary channel as disabled if no device was detected. Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29Revert "northbridge/intel/sandybridge: Fix random raminit failures"Vladimir Serbinenko
It break x230 access to channel 1. This reverts commit 9f1fbb9a3002e8d74d53d7973bd1c7e3d4879238. Change-Id: I8a3b13d17729f25cea3460ac2f87bca3c193d388 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13512 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-01-29nb/amdmct/mct_ddr3: Enable mainboard voltage setTimothy Pearson
The existing code used an incorrect macro name to check for mainboard DRAM voltage set support, and as a result no voltages were actually set. Furthermore, the existing code did not contain a centralized voltage assumption for boards that did not have a DIMM voltage set implementation. Use the correct macro name to test for boards with voltage set implementation, and provide a basic fallback to 1.5V operation for boards without a voltage set implementation. Change-Id: I638c65fe013a8e600694d8cbedf6a10b33b0ef95 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13150 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29cpu/amd/fam10h-fam15h: Correctly create APIC ID on single node systemsTimothy Pearson
The existing code generated an incorrect boot APIC ID from node and core number for single node packages, leading to a boot failure when the second node was installed. Properly generate the boot APIC ID from node and core number. Change-Id: I7a00e216a6841c527b0a016fa07befb42162414a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13149 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29nb/intel/x4x: Move to early cbmemDamien Zammit
Previously with errors in the ram init, early cbmem was disabled. Now that the ram is working correctly, set as early cbmem platform and update all (1) boards to use it. Tested on GA-G41M-ES2L Change-Id: I5925c28821537f0e326b4f5a2ac39778e4724a3c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13131 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29nb/intel/x4x: Cleanup gma.cDamien Zammit
Tidy up the code and move vga_textmode_init() later Change-Id: I49967e7197416c955ae6c8775eac7d1a60c92d1c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13128 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29nb/intel/x4x: Tidy up raminit and fix msbpos() functionDamien Zammit
- Fix bug with msbpos, it was not returning the correct result due to typo in logic, and unsigned value needed to be negative. - Add reclaim above 4GiB - Fix to ME related registers near the end of raminit Change-Id: I04acd0593a457437ee4a42e14b287b2b17a160af Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13127 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-29nb/intel/x4x: Tidy up northbridgeDamien Zammit
- Add device enable macros - Set the PMBASE correctly through southbridge device Change-Id: I1b8cc3de96b1ecaf01e31bad8fba1fada8671c2d Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13126 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29nb/intel/x4x: Fix memory hole with both channels populatedDamien Zammit
Previously, 0xa0000000 to 0xc0000000 needed to be reserved as a non-usable memory hole because it would hang on memory i/o. Memtest86+ now passes with no errors on both channels populated. Tested on GA-G41M-ES2L with 2x2GiB sticks of ram. Change-Id: Ib52a63a80f5f69c16841f10ddb896ab3c7d30462 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13125 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-01-28via/cx700: Use zeroptr over 0Patrick Georgi
This eliminates all "ud2" instances from romstage disassembly. Change-Id: I3b0c8322a4ca4a851b0cce8f3941425d9cb30383 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/13488 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28nb/intel/pineview: Native VGA init (CRT)Damien Zammit
VGA grub console works but display wobbles left/right drm/i915 driver reports one error: - [drm:i915_irq_handler] *ERROR* pipe A underrun - Monitor does not display 1920x1080 after modeset - Other resolutions look out of sync Cause: suspect single bug in raminit (chipset init) Change-Id: I2dcf59f8f30efe98f17a937bf98f5ab7221fc3ac Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12921 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-26nb/intel/pineview: Increase MMCONF decoding to 256 bussesDamien Zammit
Linux kernel detects 256 busses but previously only 64 were allocated. Removes warning in OS. Change-Id: Id83c85e60025a04acbe6a53dfea6878222d8791f Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13033 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-24nb/amd/mct_ddr3: Properly set MR0 WR valueTimothy Pearson
The existing code accidentally truncated the MSB from the MR0 WR value. While this probably had a minimal effect in reality, it should be configured correctly for maximal system stability. Change-Id: Ifb8a39c6ca47b32b44d33735e5c6c39f1dc5a44e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13147 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-01-24nb/amd/mct_ddr3: Add additional verbose-level debug statementsTimothy Pearson
Change-Id: Ie91c990d9c2bcab8292a75d87523a46d5694a34a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13146 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24nb/amd/mct_ddr3: Update drive strength configurationTimothy Pearson
The existing drive strength calibration code did not strictly follow the BKDG-defined setup process. Bring the calibration code in line with the BKDG recommendations. Change-Id: I122eeb93958d88de59d0c3b2979f607afa2c52c3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13145 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24northbridge/amd/amdmct/mct_ddr3: Enable fast refresh on ETR devicesTimothy Pearson
When an Extended Temperature Range DIMM is installed on a channel the refresh rate should be increased per the BKDG recommendations to allow correct operation at higher temperature ranges. Set fast refresh on a channel if an ETR DIMM is installed on that channel. Change-Id: I7a085d34efc78f3f0794a5cb33b88f27a5e6d54e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13144 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24northbridge/amd/amdmct: Add termination and timing values for C32 socketsTimothy Pearson
The existing MCT initialization code was largely missing C32 socket- specific configuration data. Add C32 socket-specific timing and ODT values as specified in the BKDG. Change-Id: I8eef8d5c8581f03d269663a338d5542744c5cdd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13141 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24northbridge/amd/amdfam10: Update DRAM speed limits for C32 socketsTimothy Pearson
The existing code applied G34-specific speed limits to all socket types. Update G34 and C32 specific speed limits to be in line with BKDG recommendations. Change-Id: I958ad333c47948ae741a56de5866af3e636fd24d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13140 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-20nb/intel/pineview: Use macro names for memory base registersDamien Zammit
Change-Id: I0b79ddcf9248c6a6964dd60e30a6ea18e27bc186 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13032 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-18nb/intel/pineview: Fix decode_pciebar()Damien Zammit
Fixes bug that decode_pciebar() function was bypassed due to PCI_DEV(0,0,0) being detected as zero and function returning 0. Change-Id: Ia79bcebbe3ba36f479cbb24dbbb163a031d9c099 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13031 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-17intel/sandybridge/raminit: fix ODT settingPatrick Rudolph
Count DIMMs on current memory channel instead of all memory channels. The current code is only able to correctly handle the following memory configurations: One DIMM installed in either channel. Four DIMMs installed, two in each channel. Two DIMMs installed, both in the same channel. For systems that have any other configuration the DRAM On-Die-Termination setting is wrong. For example: Two DIMMs installed, one in each channel. Test system: * Gigabyte GA-B75M-D3H (Intel Pentium CPU G2130) Change-Id: I0e8e1a47a2c33a326926c6aac1ec4d8ffaf57bb6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12892 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-01-14nb/intel/gm45: Backport configuration of panel power timingsNico Huber
Register settings are the same as on newer chips (compare sandy- bridge), just at different locations. Change-Id: Iea0359165074298a376e0e2ca8f37f71b83ac335 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/12885 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-14nb/intel/gm45: Drop unnecessary panel power handlingNico Huber
Skip everything but the final setting of PP_CONTROL, i.e. triggering the power up. The settings with PANEL_UNLOCK_REGS are useless as no lockable registers were touched in between. Also the loop waiting for the panel power up to finish was a no-op as the registers with the power timings were never filled (see follow-up commits). Change-Id: Ife27dcafdf197b2246c4e69f2bf7a3a6765d1d82 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/12884 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
This continues what was done in commit a73b93157f2 (tree: drop last paragraph of GPL copyright header) Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12914 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-13intel/northbridge/sandy: raminit code cleanupPatrick Rudolph
Remove redundant call to dram_mrscommands(). Change-Id: I157915b4432093c556b538433e3337db1e9c525f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12891 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-13northbridge/intel/x4x: clean up includesMartin Roth
- Don't redefine D0F0_PCIEXBAR_LO, use the #define in x4x.h - Move TPMBASE and TPM32() definitions into iomap.h - Use "" style include for x4x.h in nortbridge files. - Move includes of .h files out of x4x.h and into the c files that need them. - Protect function definitions in bootblock. Change-Id: I3fdb579235c5446733a0ffba05fffe1a73381251 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12849 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-12nb/intel/gm45: Convert gma.c to `if (IS_ENABLED(` styleNico Huber
Change-Id: Ifae3822b6c28832f6aa05a4ffd8f02067a923f2c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/12883 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-04Revert "AMD OemS3Save: refactor for Merlin Falcon"Kyösti Mälkki
This reverts commit d3deecdd9c5c0a8031f2ea9d6c90e0997f123d93. Do not mix open-source AGESA and binary PI trees. Once you have working S3 support for binaryPI platforms, add the adapted oem_s3.c file as northbridge/amd/pi/oem_s3.c instead. Change-Id: I7c981d0023a5c0225e046f9c0104acfa07436b79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/12282 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-31nb/intel/gm45: Export low-power and (SFF) optionsNico Huber
Make the low-power and small form factor (SFF) options overridable from romstage main. Also disable both options by default. That's ok as there aren't yet any in-tree users of the GS45 chipset. As a nice side-effect, this adds X200s support to the lenovo/x200 port. Change-Id: I94373851262e6d424cf4885ceca7260c31bc9f61 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/12814 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-30northbridge/intel/x4x: Native raminitDamien Zammit
Passes memtest86+ with either one or two sticks of 2GB ram but memory map needs a hole at 0xa0000000 to 0xc0000000 Change-Id: Ib34d862cb48b49c054a505fffcba1c17aeb39436 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/11307 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-30x86 chipsets: Link non-code flow CHIPSET_BOOTBLOCK_INCLUDE filesAlexandru Gagniuc
Non-code flow assembly stubs do not have to be included in bootblock.S, now that we have more freedom in bootblock linking. Rather than bringing these stubs to the config system, just link them in the bootblock. Note that we cannot fully remove CHIPSET_BOOTBLOCK_INCLUDE at this point, as some intel SOCs use this stub for code flow. objdump -h build/cbfs/fallback/bootblock.debug on a few random boards confirms that the appropriate sections are still included in the final binary. Change-Id: Id3f9ece14e399c1cc83090f407780c4a05a076f0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/11856 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-29northbridge/intel/x4x: Intel 4-series northbridge supportDamien Zammit
Boots to console on Gigabyte GA-G41M-ES2L Ram initialization *not* included in this patch VGA native init works on analog connector Change-Id: I5262f73fd03d5e5c12e9f11d027bdfbbf0ddde82 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/11305 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-18southbridge/amd/sr5650: Add MCFG ACPI table supportTimothy Pearson
As the southbridge largely controls the PCI[e] configuration space this patch moves the resource allocation from the northbridge to the southbridge when the extended configuration space region is enabled. Change-Id: I0c4ba74ddcc727cd92b848d5d3240e6f9f392101 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12050 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-12-16northbridge/intel ACPI: Remove unused Local methodMartin Roth
The remainder of the divide operation was being placed into a Local, but was never being used, causing an IASL warning. Since this field is optional, just remove the Local. Fixes IASL warning: dsdt.aml 640:Divide (Multiply (CTDN, 125), 100, Local0, PL2V) Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: I0b43ef638b1bc3e1163c45f31f8da57aa0d39e22 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12706 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-12-15x86 acpi: remove ALIGN_CURRENT macroAaron Durbin
The ALIGN_CURRENT macro relied on a local variable name as well as being defined in numerous compilation units. Replace those instances with an acpi_align_current() inline function. Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12707 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-13amd/[nb/fam10|sb/sr5650]: Minor cosmetic changesTimothy Pearson
Change-Id: Ia9cb4fe4f46327e38648f89da0ffce647fb118d3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12712 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-08northbridge/amd/agesa/agesawrapper.c: Fix Kconfig symbolsMartin Roth
The Kconfig symbols were missing an underscore, so were not getting evaluated properly. Change-Id: I619cf3f44f44f9c9699482d64164d3db28cd4c8f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12559 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-12-06Remove #ifdef checks on Kconfig symbolsMartin Roth
In coreboot, bool, hex, and int type symbols are ALWAYS defined. Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12560 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06amd/pi/00660F01: Remove 'PER_DEVICE_ACPI_TABLES'Martin Roth
The PER_DEVICE_ACPI_TABLES Kconfig symbol is no longer used as it was removed in commit 83f81cad (acpi: Remove monolithic ACPI) Change-Id: Ie6ba252f6e7d33da9d4500f1201367f116e4c505 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12554 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-04northbridge/amd/amdht: Reduce excessive romstage array sizeTimothy Pearson
Change-Id: Ibcdf5d3927375da5cb72987ae83eaaa789ab9a70 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12573 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-02northbridge/intel/pineview: Add native raminitDamien Zammit
Does native ram init for Intel Atom D5xx 8086:a000 northbridge Tested on Intel D510MO mainboard, board boots linux kernel - Works fully with both dimms populated (2x2GB), memtest passes 100% - Almost boots with only one dimm in one of the slots (suspect bad memory map with one dimm?) - Reads garbage with only one dimm in other slot Change-Id: Ibd22be2a959045e0a83aae2a3a0e877013f80711 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12501 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-02northbridge/intel/pineview: Add remaining boilerplate code for northbridgeDamien Zammit
This patch does *not* include native raminit Change-Id: I3fb8146ef7fe2ad27c167ecd2fb0fd629f051cc1 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12430 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-12-01nb/amd/amdht: Fix XCS buffer count setup on AMD Family 15h CPUsTimothy Pearson
The existing code re-used the Family 10h XCS buffer setup on Family 15h CPUs, which set incorrect values leading to random system lockups. Use the Family 15h XCS buffer setup shown in the BKDG. Change-Id: Ie4bc8b3ea6b110bc507beda025de53d828118f55 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12070 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-01nb/amd/amdfam10: Fix incorrect channel buffer count configurationTimothy Pearson
The secondary bus number set code incorrectly overwrote the link buffer settings in F0x[F4,D4,B4,94]. Constrain the secondary bus number set to the appropriate bits of the registers. Change-Id: If70825449f298aa66f7f8b76dbd7367455a6deb1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12068 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-01nb/amd/mct_ddr3: Add Family 15h tristate enable codesTimothy Pearson
The Family 15h DRAM initialization did not set up the various tristate enable codes in the MCT. Add Family 15h tristate enable setup. This fixes multiple DIMMs on a single channel. Change-Id: I0278656e98461882d0a64519dfde54a6cf28ab0f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12060 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-12-01amd/pi/00630F01: Drop HT3_SUPPORTMartin Roth
The Kconfig symbol CONFIG_HT3_SUPPORT is not implemented. This mirrors commit c5163ed8 (AMD binaryPI: Drop HT3_SUPPORT) Change-Id: I2682d3b620e2cee613c7421622a8c79db5ba3a86 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12556 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-11-30nb/amd/amdmct/mct_ddr3: Use StopOnError to decrease training timeTimothy Pearson
There is no need to continue testing a DCT configuration after data errors have already been detected; this just wastes time during boot. Change-Id: I979e27c32a3e0b101590fba0de3d7a25d6fc44d2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12066 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-30cpu/amd/family_10h-family_15h: Apply missing Family 15h errata fixesTimothy Pearson
Change-Id: I132874fe5b5a8b9a87422e2f07bff03bc5863ca4 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12065 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins)
2015-11-30nb/amd/mct_ddr3: Use antiphase to better center DQS windowTimothy Pearson
The BKDG recommends the use of an antiphase window detection algorithm to ensure that the DQS data eye is properly centered. TEST: Booted both with DIMMs known to move the data eye into the prior clock phase and DIMMs known to keep the data eye in the current clock phase. Change-Id: I1d85fddd45197ca82dcaa46fe863e64589712d1f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12059 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-29nb/amd/mct_ddr3: Fix odd rank data corruptionTimothy Pearson
The odd rank of each DIMM could experience data corruption due to incorrect DQS training. Fix the DQS training algorithm by executing the relevant portions of the training algorithm on the odd ranks. Change-Id: Ibc51f5052d5189e45b3d9aa98ca8febbfe13f178 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12058 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-29nb/amd/amdmct/mct_ddr3: Fix a minor RDIMM CS select errorTimothy Pearson
Change-Id: I4cdfeec887813c17edcdee8858222414fb19b72c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12057 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-29nb/amd/amdmct/mct_ddr3: Ensure channel clock skew is properly setTimothy Pearson
Also fix incorrect Trfc[0-3] value on Family 15h. Change-Id: Iafc233984ae1d44fe6a1cb5b109d36397cbd991a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12055 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-28nb/amd/amdfam10: Work around sporadic lockups when CC6 enabledTimothy Pearson
The silicon in control of CC6 appears to contain minor bugs and / or deviations from the BKDG; through trial and error it was found that these issues can be worked around by reserving the entire possible CC6 save region, regardless of currently installed node count. Change-Id: If31140651f25f9c524a824b2da552ce3690eae18 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12054 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-24northbridge/amd/amdmct/mct_ddr3: Add CC6 setup information messagesTimothy Pearson
Change-Id: I17660ce5429431e08476b7bba15e381636b64c7d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12053 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-11-24northbridge/amd/amdmct/mct_ddr3: Add DDR3 termination debug outputTimothy Pearson
Change-Id: Iabd2e3e20b0e9719080f6bd7be2032c1749994dc Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12056 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-24nb/amd/amdfam10: Fix gart setup not working on Fam15h processorsTimothy Pearson
Change-Id: Ib78620c30502df6add9cc2ea1dbd4fb6dc89203e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12047 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-11-24northbridge/amd/amdht: Add isochronous setup supportTimothy Pearson
The coherent fabric on all Family 10h/15h devices supports isochronous mode, which is required for IOMMU operation. Add initial support for isochronous operation. Change-Id: Idd7c9b94a65f856b0059e1d45f8719d9475771b6 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12042 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-24amd/amdfam10: Control Fam15h cache partitioning via nvramTimothy Pearson
Add options to control cache partitioning and overall memory performance via nvram. Change-Id: I3dd5d7f3640aee0395a68645c0242307605d3ce7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-24northbridge/amd/amdfam10: Rename mislabeled iommu nvram option to gartTimothy Pearson
Change-Id: Ia24102e164eb5753ade3f9b5ab21eba2fa60836b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12046 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-24northbridge/intel/pineview: Add minimal Pineview northbridgeDamien Zammit
Based on i945. Tested on Intel D510MO mainboard, board boots to UART console with this code. Change-Id: I1d92a1aa6d6d767bda8379807dc26b50b9de75c9 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/10073 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>