| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I4a8297397d878e38516c8df19dd311c7ef19ec06
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17478
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
When MRC cache is available, first read only the SPD unique
identifier bytes required to detect possible DIMM replacement.
As this is 11 vs 256 bytes with slow SMBus operations, we save
about 70ms for every installed DIMM on normal boot path.
In the DIMM replacement case this adds some 10ms per installed DIMM
as some SPD gets read twice, but we are on slow RAM training boot path
anyways.
Change-Id: I294a56e7b7562c3dea322c644b21a15abb033870
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17491
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
For S3 resume path SPD is only used for DIMM replacement detection.
As this detection already fails in the case of removal/insertion of
same DIMM, we can rely on cbmem_recovery() failure alone to force
system reset in case someone accidentally does DIMM replacements while
system is suspend-to-ram stage.
Skipping DIMM replacement detection allows skipping slow SPD loading,
thus reducing S3 resume path time by 80ms for every installed DIMM.
Change-Id: I4f2838c05f172d3cb351b027c9b8dd6543ab5944
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17490
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Take the timestamp before SPD loading takes place, for easier
comparison against MRC blob performance and followup changes
will optimize some of the slow SPD/SMBus operations.
Change-Id: I50b5a9d02d2caf4c63e1a4025544131a085b8fb6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17489
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Switch to use CRC of unique identifier section SPD[117..127],
remaining area of SPD data is ignored.
Change-Id: If4b43183f99f5f911ae6c311b43c29a72b9922e2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17487
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Also memset info.dimm as it contains decoded SPD timings
used to calculate common timings.
Tested manually on Lenovo T420.
Change-Id: I659e5bc2a6cbadd9539931ee00ddea0a5253295f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17473
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
No need to find the same CMD rate for all channels.
Allow different CMD rates for every channel.
Tested on Lenovo T420 with different modules on each channel.
No regressions found.
Change-Id: I7036275ae89335dd3549ec392fa64824355b3cbf
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17472
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use register names found on forums.corsair.com.
No functionality changed.
Change-Id: Ibaede39a24e8df1c4d42cb27986ab66174b7d45b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17400
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Locking the PLL again once it's locked doesn't work.
The MRC doesn't do this, for some reason.
Remove fallback attempts of lowering DDR frequency.
Change-Id: Iccb54fa7d7357a22182dd26bd5b49c4073c04dc9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17399
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As documented in DDR3 spec for MR2 the CWL is based on DDR frequency.
There's no to little difference for most memory modules operating at DDR3-1333.
It might fix problems for memory modules that operate at a higher frequency and
memory modules with low CL values should work even better.
Tested on Lenovo T420 with DDR3-1333 CL9 and DDR3-1600 CL11.
No regressions found.
Change-Id: Ib90b5de872a219cf80b4976b6dfae6bc02e298f4
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17389
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Don't use scratchpad registers when we have romstage_handoff
to pass S3 resume flag. Also fixes console log from reporting
early in ramstage "Normal boot" while on S3 resume path.
Change-Id: I5b218ce3046493b92952e47610c41b07efa4d1de
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17455
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adapt implementation from haswell to prepare for removal of HIGH_MEMORY_SAVE
and moving on to RELOCATABLE_RAMSTAGE. With the change, CBMEM and SMM regions
are set to WRBACK with MTRRs and romstage ram stack is moved to CBMEM.
Also fixes regression of slower S3 resume path after commit
9b99152 intel/sandybridge: Use common ACPI S3 recovery
Skipping low memory backup and using stage cache for ramstage decreases
time spent on S3 resume path by 50 ms on samsung/lumpy.
Change-Id: I2afee3662e73e8e629188258b2f4119e02d60305
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15790
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Replace the use of the old device_t definition inside
northbridge/via/vx800.
Change-Id: I14a2b4d847f8aeb327d90f385dea998779fae24f
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17316
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
northbridge/via/cx700.
Change-Id: I6e25f898ab55ee959f1b3b8aba9616c3ba18986d
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17315
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
northbridge/intel/i855.
Change-Id: Iae66d1ef838095a560868d9c9ff81f4208f814f1
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17314
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
northbridge/amd/agesa/family10.
Change-Id: I5723e217fc739ab576cbe3a1ee6d92023190267c
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17313
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This is more consistent with other Intel GMCH code.
Change-Id: I7bfaa79b9031e2dcc5879a607cadacbdd22ebde7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17405
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Have a common romstage.c file to prepare CAR stack guards.
MTRR setup around cbmem_top() is somewhat northbridge specific,
place stubs under northbridge for platrform that will move
to RELOCATABLE_RAMSTAGE.
Change-Id: I3d4fe4145894e83e5980dc2a7bbb8a91acecb3c6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15762
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix regression, S3 resume not working on sandy/ivy after commit
9d6f365 ACPI S3: Remove HIGH_MEMORY_SAVE where possible
There is some 20ms delay with ACPI S3 wakeup time due to MTRR setup
being done after the backup copy. Moving to RELOCATABLE_RAMSTAGE fixes
this delay by removing need of this backup entirely.
Change-Id: Ib72ff914f5dfef8611f5f6cf9687495779013b02
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15248
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Id0c62cebfceaf083f1bb39514b06b32c55128b85
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17172
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
945G-M4 returns : "unknown max. RAM clock (2)",
however, it supports up to DDR2-667MHz.
i945/raminit.c sdram_capabilities_max_supported_memory_frequency()
function returns 667 for case 2.
Change-Id: I3d54c88af897a71db757d00288f3968ed2c19151
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17191
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I51cf4f35bf2ea95c8c19ab885e6308535314b0af
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17153
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change may slow down the raminit by maximum 200usec,
but reuses the lapic udelay definition.
Change-Id: I60a68f8a7911b257c0eecda96f7c5bf302bb51ed
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17152
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I3f692c55fdff99aa9eb41eaaea79a41ac93be590
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17170
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
No boards left in the tree for this northbridge.
Change-Id: Id45da11b9d78cbd6bd50acb5a3c6c3c270f9020e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17281
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Carrizo (00660F01), Merlin Falcon (00660F01), and Stoney Ridge (00670F00)
locate the HD audio controller on the northbridge root complex at 9.2
instead of the FCH. This duplicates the existing ASL into the northbridge
directories and reports the correct address.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit f68206c2b42c90076efd968a99f4d3a49e403438)
Change-Id: I6d42bb40ad58c7f35e8c88ff27ebd327d656c021
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17216
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Adjust the names to match AMD's convention for family and model.
This patch is relevant for:
Trinity & Richland: Family 15h Models 00h-0Fh
Carrizo: Family 15h Models 60h-6Fh
Mullins & Steppe Eagle: Family 16h Models 30h-3Fh
Change-Id: I613b84ed438fb70269d789c9901f1928b5500757
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/17169
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I230b5425ac9e916a5ee10a49eeaf5d6d44fd49e6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17192
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The Stoney device supports only a single channel of DRAM with
two DIMMs. Correct the dimmensions of the SPD lookup array.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: <marcj303@gmail.com>
(cherry picked from commit 54a5e4a7092b77cca90894e86387f719fa3aa2c8)
Change-Id: Ib776133e411d483bb5b7e3c070199befc631d209
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17145
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Remove the language associated with the Carrizo Gfx PCIe bridges.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit cc32b09b0f0137c11d82f35274ca33e013f73748)
Change-Id: I8b67a646f98667d500fcee5da8389c10483488da
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17144
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Modify the new Stoney support files to match the APU's IDs and codename.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit de626730758def76e558294762a06d8ec9950cb9)
Change-Id: Idc914bc80a27ac13426fdf00fc3f578ce072086f
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17143
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Prepare for new 00670FF00 (StoneyRidge) support.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit 037cf16883fafd329a15f903ddf97e24a879bcce)
Change-Id: I130d4f13beb2c1d71e4e4e9be5011f7993b34660
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17142
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I1e964ed939ca5282008253e3fbdd1d2fa5cbf278
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17076
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This fixes a typo introduced in 9c5fc62f: "nb/i945/gma.c: use IS_ENABLED
instead of #if, #endif".
Change-Id: I2c9ca796767a507483c32867f9b7f172842a1ab3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17075
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These settings should be always made by the firmware, no matter if we
set up graphics or not. It looks like Linux doesn't even know these
registers.
The values are taken from the PRMs for Sandy Bridge and Ivy Bridge [1,
2]. They match the settings that were done in the native graphics path
for Ivy Bridge. I expect the differences to be an update (i.e. the set-
tings we did on the Sandy Bridge path were just outdated). Also, these
settings affect the PCH and not the CPU which are independent from each
other.
[1] Intel® OpenSource HD Graphics Programmer’s Reference Manual (PRM)
Volume 3 Part 3: PCH Display Registers (SandyBridge)
Doc Ref #: IHD-OS-V3 Pt3 – 05 11
https://01.org/sites/default/files/documentation/snb_ihd_os_vol3_part3.pdf
[2] Intel ® OpenSource HD Graphics Programmer’s Reference Manual (PRM)
Volume 3 Part 4: South Display Engine Registers (Ivy Bridge)
Doc Ref #: IHD-OS-V3 Pt 4 – 05 12
https://01.org/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf
Change-Id: I83cc90c7558b93273a727f332fb0d8ced47ed70e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17073
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ic01565cb730c49a5fe77c8f4990276970964f101
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17174
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Those registers are only used on more recent Intel platforms featuring a
PCH. The DP registers on G4X hardware are at a different offset.
Change-Id: I4660e547426ccec0b2095d897e4a8c86e0acf41e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17111
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Those registers are only used on more recent Intel platforms featuring a
PCH. The DP registers on G4X hardware are at a different offset.
Change-Id: Ib49e54d4e7d6595dc09fb1be35ac8178b80c7f71
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17110
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Also drop an odd comment about the resource allocator which seems to
work fine, with the right id.
Change-Id: I9099211fe946c28f90dd7730345b81a3f7f6f545
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17095
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This fixes an instability on 945gc where the IGD completely locks
up the system, when for instance tasked to do something with
compositing (like GNOME or GDM).
TESTED on ga-945gcm-s2l and d945gclf
TEST: launch GDM (gnome display manager)
Change-Id: Iec49bccf3e3164df9dc1e0b54460a616fe92e04d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17094
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I48ae27c5460020b9118e6ade1a3e610b542999c7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17040
Tested-by: build bot (Jenkins)
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ib58126e1c9001ed679e161d6d06241fac762bdb3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17049
Tested-by: build bot (Jenkins)
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The cross clocking of 800MHz FSB CPU with 667MHz RAM was incorrect.
The result is that 800MHz FSB CPUs now properly work with 667MHz RAM.
Value taken from vendor bios on ga-945gcm-s2l and suggested by Haouas
Elyes.
Change-Id: I56c12af50c75a735af0150a4e7bce4faacc93648
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17038
Tested-by: build bot (Jenkins)
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Previously the 945gc raminit only worked for 533MHz FSB CPUs.
This extends the tRD_Mclks in drt0_table for other FSB speeds. The values are
taken from the vendor bios of Gigabyte ga-945gcm-s2l.
The result is that 1067MHz FSB CPUs now boot without problems.
800MHz FSB cpus still don't get past romstage.
Change-Id: I13a6b97d2e580512155edf66c48405a153121957
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17034
Tested-by: build bot (Jenkins)
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This removes writes to FDI related registers since there is no FDI
link on these targets. This is likely a remainder from copying code from
later targets.
TESTED on Thinkpad x200 (gm45)
Change-Id: Id67fdc999185fa184a9ff0e5c3fc9bced04131ad
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16993
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
This issue was found by Coverity Scan, CID 1364118.
Change-Id: Iba3c0f4f952729d9e0987d928b63ef8b8fe8841e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16992
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
According to: "Intel ® 965 Express Chipset Family and Intel ® G35 Express
Chipset Graphics Controller PR" the p2 divisor needs to be 10 when the
dotclock is below 225MHz and 5 when its above 225MHz.
Change-Id: I363039b6fd92051c4be4fdc88788f27527645944
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16991
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I3f99190401d8df1415328da9c3b928194593901c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16989
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
According to "G45: Volume 3: Display Register Intel ® 965G Express
Chipset Family and Intel ® G35 Express Chipset Graphics Controller" the
VSYNC end should start at bit 16. This is also how Linux (at least 4.4)
sets this register, which can be seen with intel-gpu-tools.
TESTED on Lenovo thinkpad X60 (it does not change anything).
Change-Id: Ie222ac13211a91c4fbc580e2bf9de0d973ea9a3a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17015
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Some devices have no LVDS output but if no VGA is connected or
no EDID can be found, it will try to init LVDS.
This patch detects the presence of an LVDS panel and makes sure that
LVDS is not initialized when it is absent.
Change-Id: Ie15631514535bab6c881c1f52e9edbfb8aaa5db7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16513
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This reuses linux code (at least 4.1) to compute the graphic clock
divisors for LVDS displays on the gm45 northbridge.
The divisors m1, m2, n, p1, p2 need to be such that
"BASE_FREQUECY * (5 * (m1 + 2) + (m2 + 2)) / (n + 2)
/ (p1 * p2)" is as close as possible to the target_frequency.
On g4x hardware the BASE_FREQUENCY is 96000kHz.
This potentially increases LVDS display compatibility.
Change-Id: I2323af5756431e89769f95059790f5a922af14b4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16741
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I2b8c4ef75cca9f9d5251789cda4187a02076b69d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16964
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
MHCBAR(CLKCFG) was previously incorrectly written by the
sdram_program_memory_frequency function which required falsely
limiting the max dram frequency for 945GC.
TESTED on Intel d945gclf (memclock 667 and fsb 533) and
Gigabyte ga-945gcm-s2l (memclock 667 and fsb 1067)
Change-Id: I520efd69fa09fc9fde87c5301fd81121fde6a700
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16940
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
An epic battle to fix Nehalem finally ended when we found an odd mask
set in SMRR. This was caused by a wrong calculation of TSEG size. It
was assumed that TSEG spans the whole space between TSEG base
and GTT. This is wrong as TSEG base might have been aligned down.
TEST: On X201, copied 1GiB from usb key to sd-card and verified.
Change-Id: Id8c8a656446f092629fe2517f043e3c6d0f1b6b7
Found-by: Alexander Couzens, Nico Huber
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16939
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I3213a8664955239b10bcf1784ce1ba5e0d95688b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16958
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch implements native resolution, VESA mode, on the VGA output of
x4x.
It relies on EDID to modeset, but has a fallback-mode (640 x 480 @
60Hz) if this is no EDID could be found. This fallback mode only works
in textmode since in VESA mode some payloads (grub2) rely on VBE info,
which is being generated from an EDID.
Change-Id: I247ea7171ba3c5dc3b209d00e4dcb2d2069abd75
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16498
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I2d40049a27f725f14acbc16438f0e6ea7cdd7329
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16879
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I0dd8c32f1b9165fe8c449cee1c21a155a725c04f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16878
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic589b26c6c94df12e1fe218d079018db8b38fbd9
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16898
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: If372655700c18340d51368a39392560f664f4a45
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16896
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I04fe6b7a8798d0f3cb54130283ce5a50eb9ac5b4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16895
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ifd6aefa6c046d100a5388a24a7d23cbd77905a85
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16893
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I37c1674ee380936aba797e24897593fcca3b0269
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16891
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I930c761b9a2422590af3a0a5008b4ff2abe3fd96
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16890
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I2a52db28353f8575d11218af936b4a233fd05f77
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16889
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic22f8a00e6009e104df8c4374067369ebbf90ee2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16888
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I5f45a4cd5661140f57aa37e86cc8a34622da3de5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16887
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I7966f996a4291cc6b97b53aba59b43358de94e45
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16886
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I63fee62253cb0488a041c9985a646102261b8c5e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16880
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ib06ecd083f00c74f1d227368811729d2944dd1ef
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16851
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The datasheets on gm45: "Mobile Intel® 4 Series Express Chipset Family"
mention the possibility of having 352M ram preallocated for the
integrated graphic device. This only worked fine if the amount of ram in
the system was 3GB or less. When 4G or more is installed, memory is
remapped to create a 1GB large pci mmio hole which is not enough and
creates conflicts when 352M vram is used.
This patch increases the pci mmio hole size on Lenovo x200 to allow
352M vram to work.
TEST: build and flash on target with 4GB ram or more, use nvramtool to
set gfx_uma_size to 352M and reboot.
Change-Id: I5ab066252339ac7d85149d91b09a9eaaaab3b5b6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16831
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Iea0352f85f4d5f47fc906edbe625e7bbf3f03afd
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16863
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Replace the use of the old device_t definition inside
northbridge/via/cn700.
Change-Id: Ib7761697daad3c459f3568e5158f925199bcd919
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16689
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add PCI device id to native graphic init and add the Native graphic init
option in Kconfig.
Change-Id: I136122daef70547830bcc87f568406be7162461f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16512
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This reuses the Intel Pineview native graphic initialization
to have output on the VGA connector of i945 devices.
The behavior is the same as with the vendor VBIOS BLOB.
It uses the external VGA display if it is connected.
Change-Id: I7eaee87d16df2e5c9ebeaaff01d36ec1aa4ea495
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16511
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The code to compute n, m1, m2, p1 divisors is not correct in coreboot and
on some targets hits a working mode at lower refresh rate, which is why
display is working on some targets.
The divisors must be such "refclk * (5 * (m1 + 2) + (m2 + 2))/ (n + 2)
/ (p1 * p2)" is as close as possible to the target frequency (which
is defined by the resolution and refresh rate).
This patch also fixes the reference frequency.
This patch reuses linux (4.1) code from drivers/gpu/drm/i915/intel_display.c
to correctly compute divisors.
The result is that some previously not working displays, like many
displays found on the Lenovo T60 might work now.
Some examples of T60 displays that were known to not work (in payload):
Samsung LTN141XA-L01 (14.1" 1024x768)
LG-Philips LP150X09 (15.1" 1024x768)
IDtech N150U3-L01 (15.1" 1600x1200)
IDtech IAQX10N (15.1" 2048x1536)
Samsung LTN154X3-L0A (15.4" 1280x800)
LG-Philips LP150E06-A5K4 (15.1" 1400x1050)
Tested on T60 with 1024x786.
Change-Id: I2c7f3bb0024ac005029eaebe3ecdc70c38ac777e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16504
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Compilation (w/o native raminit) fails due to missing include
Change-Id: Ic79a77006257b32e0181c88c4e24d7c1f5c5f7ce
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/16735
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This generates a fake VBT for the Intel i945 graphic device. i945
supports both the mobile chipset 945gm (calistoga) and the desktop
chipset 945gc (lakeport), which is why a VBT with a different id string
needs to be created for each target.
The VBT id string is obtained from the vbios blob in the following way:
"strings vbios.bin | grep VBT".
Change-Id: I8245b12b16a4426efbe1f584d4163fc257231a98
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16530
Tested-by: build bot (Jenkins)
Reviewed-by: Damien Zammit <damien@zamaudio.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Padding the VBT id string is now done automatically.
Change-Id: I8f9baf7b1585026bc29b82d07e451aa11e284ffb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16740
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I1c2786dfb166904ff8b19a663c5e2e8156b7aedf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16644
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If87718b6c91d79212a9b045f5fda32d69ac4caee
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16643
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I80a2753f22d5211c8be4e17e2338402286a2cadc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16645
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I86a252598666af635281eaa467020acb53d71c77
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16642
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I87f8978b8ec6ddc11dd66a77cbb630e057f9831b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16623
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I63f58d95fa01b1f73f3620a5d13f21ef62e2404c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16588
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I5ff894f23dc2a2c59bc5e5d1de4287a6b9c9922c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16625
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I24505af163544a03e3eab72c24f25fcdc4b1b16c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16624
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: If700dc5fa9ae33649993557f71db0fe1eb76204b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16634
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I964512c0e913f7443f3dea859b01358645cfd8a6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16632
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ic4e287209cc45fae574e7af9d45b8a0e648ef686
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16627
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I8fa1e39bfd950475e3b55d6debcbfd92615aa379
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16628
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I53aa17076135e55665f2f7c6ede217388fc50cca
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16633
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ia60729db83333c1159862cf604de321e3af8dcb1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16631
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I1b5cdfaf39be639a7ef71e66e91284fa186fbb86
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16630
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I3781c36a3f354bfd54d20488b95d4f2307c3bce2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16629
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The correct id string for gm45 is "$VBT CANTIGA ".
This can be found in the gm45 option rom:
"strings vbios.bin | grep VBT".
Change-Id: Icd67a87dac774b4b3c211511c784c4fb4e2ea97c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16551
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This implements "Keep VESA framebuffer" behavior on VGA output of gm45.
This patch reuses Linux code to compute vga divisors.
Change-Id: I2db5dd9bb1a7e309ca763b1559b89f7f5c8e6d3d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16338
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The intel x4x and gm45 have very similar integrated graphic devices.
Currently the x4x native graphic init enables VGA, while gm45 can output
on LVDS.
This patch reuses the x4x graphic initialisation code
to enable output on VGA in gm45 in a way that the behavior is similar to vbios:
If no VGA display is connected the internal LVDS screen is used.
If an external screen is detected on the VGA port it will be used instead.
Change-Id: I7e9ff793a5384ad8b4220fb1c0d9b28e6cee8391
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16295
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ie7ee547ab34441f93433936334e9881dd7cc0371
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16599
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ib1f9926ced1fd382c782f5098eb1ad98330cf655
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16600
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
