Age | Commit message (Collapse) | Author |
|
1.) Allow MCT information structures to be copied to cbmem.
2.) Retrieve DIMM vendor, model, and serial information.
3.) Allow maximum installable memory to be set via devicetree.
Change-Id: I0aecd2fb69ebad0a784c01d40ce211f6975a3ece
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9137
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This allows safe access of romstage MCT values from ramstage
Change-Id: I229b19a64f7f148f970ec86dde7f4b6a62469064
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9158
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These binaries were being added to CBFS using hexadecimal values instead
of the CBFS binary type names. The same value was being used in
different places for different things.
For example, the value 0xAB is used for SPDs, MRC & FSP binaries.
This patch uses CBFS type names instead of hex values everywhere a
hex value was previously used.
Change-Id: Id5ac74c3095eb02a2b39d25104a25933304a8389
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8978
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
We have .lb, .lds, and .ld in the tree. Go for .ld everywhere.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I3126af608afe4937ec4551a78df5a7824e09b04b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9107
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I973abf2224762bf7a53d71177544ade15db50cba
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8856
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
mainboards/amd/fam10: Initialize cbmem area after raminit
When GFXUMA is enabled, CBMEM is placed at TOM - UMASIZE
When GFXUMA is disabled, CBMEM is placed at TOM
This matches the behaviour present before conversion to early
CBMEM.
The CBMEM location code implicitly assumes TOM does not change
between romstage and ramstage. TOM is set by romstage raminit,
and is never changed by romstage or ramstage afterward. As
the CBMEM location is positioned at a specific offset from TOM
that is known to both romstage and ramstage early CBMEM is safe
on Fam10h systems.
TEST: Booted ASUS KFSN4-DRE and verified both cbmem timestamp
tables from romstage and cbmem log tables from ramstage.
Change-Id: Idf9e0245fe91185696ff664b06182c26b376c196
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8489
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
The CBMEM memory segment is always placed at TOM - UMASIZE when GFXUMA
is enabled, however when GFXUMA is disabled an attempt was made to locate
the CBMEM memory segment above the I/O hole in certain rare cases.
Removing this special case does not impact functionality, and paves
the way for early CBMEM support.
Change-Id: I98d29ab9d601a4e20f58e2cd0a66abb13b494e74
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8664
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Aaron Durbin <adurbin@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
The GCC 4.9.2 update showed that the boot_state_init_entry
structures were being padded and assumed to be aligned in to an
increased size. The bootstate scheduler for static entries,
boot_state_schedule_static_entries(), was then calculating the
wrong values within the array. To fix this just use a pointer to
the boot_state_init_entry structure that needs to be scheduled.
In addition to the previous issue noted above, the .bs_init
section was sitting in the read only portion of the image while
the fields within it need to be writable. Also, the
boot_state_schedule_static_entries() was using symbol comparison
to terminate a loop which in C can lead the compiler to always
evaluate the loop at least once since the language spec indicates
no 2 symbols can be the same value.
Change-Id: I6dc5331c2979d508dde3cd5c3332903d40d8048b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8699
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is required for early CBMEM support.
Change-Id: I31d9b6a04ef963a7d3e045d9c5201ae64604218a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8663
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This removes the mainboard agesawrapper.c file from binarypi
based boards and creates a common one.
Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8671
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This makes the change to the cpu/amd/pi/00730F01 that was
made for the cpu/amd/agesa based boards in:
commit 48518f0d
AGESA: Add amd_initcpuio() and amd_initmmio()
These are not wrappers for AGESA as they do not enter vendorcode at all.
We expect most of the added fixme.c file to be written without use of AMDLIB.h
and parts relocated as northbridge enable_resources().
The equivalent change has already been made for cpu/amd/pi/00630F01.
Change-Id: I591b50ee807436f5a1dee14d2c88a77462024744
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8670
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Tested on an X60, Native graphics init still works perfectly.
Change-Id: I91be3baa658e0332028c512c5a4cb0aee07d540a
Signed-off-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-on: http://review.coreboot.org/8696
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
GIT hash 586d6e introduced a regression that causes boot failure
with an f0011449 AMD stop code.
Change-Id: Ieced9088b79bc89d55117b7240b82a086eff9d21
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8685
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This is useful when the PCB layout of a mainboard does not allow
stable operation at the increased HyperTransport speeds of newer
processors.
Change-Id: Idc93a1294608178ddf38ca72d40e6bad7deb9004
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8464
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This capability means:
FERR messages are sent out on system detected an
unmasked floating point x87 FPU error.
Even though this capability is supported on nehalem it doesn't
make sense to set it in early stage. This MSR
has a core scope which results in an unsync MSR because
it's not set on other cores than the BSP.
Found-by: BITS
Tested-on: lenovo thinkpad x201t
Change-Id: Ief3c04f57ac69e7289fbd37dbc3fd239f9098155
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8659
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There is nothing platform specific in retrieving S3 resume state from
romstage_handoff structure. Boards without EARLY_CBMEM_INIT update
acpi_slp_type from ACPI power-management block or scratchpad registers.
Change-Id: Ifc3755f891a0810473b3216c1fec8e45908fc1ab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8188
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Commit 2e0cf14 corrected this for pi/00730F01/northbridge.c.
This commit fixes it for pi/00630F01/northbridge.c.
Found-by: Clang
Change-Id: I4eb93a07aacf6ffc5a159222117e7c934d85859e
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8289
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Also fix a typo in a config option for SteppeEagle.
Change-Id: Iad51cc917217aa0eac751dc805c304652d20e066
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7247
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
All boards in tree use 0. Looks like this is all work that was
never completed and tested.
We also have static setting sysconf.segbit=0 which would conflict
with PCI_BUS_SEGN_BITS>0.
Having PCI_BUS_SEGN_BITS>0 would also require PCI MMCONF support
to cover over 255 buses.
Change-Id: I060efc44d1560541473b01690c2e8192863c1eb5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8554
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I982acb0b36f2cef8281ffbac4511f831f08fc89a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8553
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I41aba81def13c99671eb609dd1e76a9a45299622
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8552
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Also drop some more #if UNUSED_CODE.
Change-Id: I1bbe96a65c9240636ff7cfaf70c2ecbfb3aee715
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8551
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There is no requirement that in dev->link_list the last element
would have the highest link->link_num.
Also fix off-by-one error when allocating for more links.
Change-Id: Id8a7db3ffb4111eb31e70ea14fd522b70368dd8c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8550
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I7f8cbfcae7ec2a49e91ceda1eecdcf76b2137d8b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8549
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The BKDG for K10 revision D and later processors recommends a smaller
MCT burst write queue depth when using unganged memory.
TEST: Booted ASUS KFSN4-DRE with both Opteron 8356 and Opteron 2431
processors.
Change-Id: I36718d4972c9d2d0bdd3274191503b5fcd803f15
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8500
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This change brings all agesawrappers in a single file to make it
easier to understand the actual execution flow.
Change-Id: Ifbb2b16e4cccfaa17aaf10887a856797be9b6877
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8605
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We do not allow platforms to mess around with memory layout.
Change-Id: I316ff522c8833fa3b7ad20f2c5a9cae21f4174d8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Moved mctGetLogicalCPUID() to a separate file and made it available in
both romstage and ramstage.
Change-Id: I959c1caa8f796947b627a7b379c37d7307e2898e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8499
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ib5f87bdc50c0bca370a636218d3b5d4cc9157c12
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8501
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: If96e0843f507b9f1db9977b5d0c47f5ed1c59999
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8533
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Already done for fam15tn/rl.
Change-Id: Id74ca13610a4ef407c866a4419139287413078a4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8531
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Kconfig variable is not implemented.
Also fix broken abuild.
Change-Id: I569f44e97abc570158472ddbd0f890315233f8a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8494
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
We only need one of devx and dev. This function should be called
with dev already adjusted if link_num > 3.
Change-Id: I7166bbb88143bc28802c9530c4da16db67868d8e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8351
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I9a24f9897115ce37ee11ca41c8b74142c95fc534
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8350
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I198f2ad321e1a8b6d932f5624b129e312e36a309
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8349
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I6ce784fd9e7a6876a37c910c503fafa3a17bf96f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8348
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Id8fc1d7d8a23238e6848cd2cf4270d782e90a7d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8347
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Iee51c51b662d1f5e3d918d1e5b961f06c6b99df6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8346
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I2c2d586fc572b78b5019f8ef2714959799a8d2a9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/8480
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
These settings are specific to the SteppeEagle SOC and should
be made in its northbridge code rather than the CPU code.
Change-Id: I1a231f95225e1414b0cbc026a2a7b7797bd91fca
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8254
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Note that the limit is not set in the devicetree.cb which use native
sandybridge raminit, as it is not needed. When that isn't set, it's
automatically set to zero, and when we find that, we automatically
return the default limit. Thus behavior isn't changed for any board.
Change-Id: I447399eea71355612b654710a56f3a0077c2f7f9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8476
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We can successfully bring up systems if timC calibration fails, as has
been demonstrated with google/butterfly. As a result, do not die(),
but simply print a message and continue in the hope that we may be
able to boot.
Change-Id: I49ec80324f63b2d45ae8f61c5c26454acb9c232f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8475
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch allows the user to set a maximum HT link frequency in
NVRAM, paralleling a similar option available in the proprietary
BIOS on some mainboards.
Change-Id: Iba3789262eefa52421e76533cbf14d9da2ef1de8
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8462
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The existing code generated invalid ACPI processor objects
if the core number was greater than 9. The first invalid
object instance was autocorrected by Linux, but subsequent
instances conflicted with each other, leading to a failure
to boot if more than 10 CPU cores were installed.
The modified code will function with up to 99 cores.
Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8422
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Change-Id: I48d2cda330d8e8f1e58bc670e4e898479216e576
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8461
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
All settable memory controller options are now controlled by NVRAM,
making the Kconfig options irrelevant.
Change-Id: I9b2c8798d830e5c41bb9a108514e60d784d2ebc5
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8452
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
K10 processors cannot operate at full memory speeds when more than a
certain number of DIMMs are installed on a specific channel. The
allowed DIMM numbers and speeds are listed in the BKDG; this patch
implements the appropriate frequency reduction to ensure stability.
Change-Id: I8ac5b508915e423d262ad36c49de1fe696df2ecd
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8435
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This fixes errors of the form:
error: 'Dct0MemSize' may be used uninitialized in this function
Change-Id: Ifc853aea9050994f5641c57a081aa0667331c995
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8455
Tested-by: build bot (Jenkins)
|
|
This patch allows the following memory controller settings to be overridden in NVRAM:
Memory frequency limit
ECC enable
ECC scrub rate
Change-Id: Ibfde3d888b0f81a29a14af2d142171510b87655e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8438
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
On x86, change the type of the address parameter in
read8()/read16/read32()/write8()/write16()/write32() to be a
pointer, instead of unsigned long.
Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7784
Tested-by: build bot (Jenkins)
|
|
Kconfig variable is not implemented.
Change-Id: I546a1001847e7b1002f96baf49ed3301852a6894
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8345
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Keep the slower HyperTransport configuration for a possible reference
in fam15 boards.
Change-Id: Ifcdedc6385fec80f7d02c55c2aac10e5e2429a18
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8344
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib83ec5c397fdef5aa9e3376f1c0072cfa2f74fa6
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8425
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Two source files were accidently marked executable. Switch them back to
mode 644 (rw-r---r--)
Change-Id: Ic96f6e5e9a05cbffb65cdfb627023d04d3866dc9
Signed-off-by: Stefan Reinauer <stepan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8426
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
The indentations of #define are not consistent in chip.h. Update to make
all #define indentations being aligned and put them after the variable
declaration.
Change-Id: I37550acac18bac3efddb580ef6b956be0e2b357a
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/8333
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
1) Save the pointer to the FSP HOB list to low memory at address 0x614.
This is the same location as CBMEM_RESUME_BACKUP - the two aren't used
in the same platform, so overlapping should be OK. I didn't see any
documentation that actually said that this location was free to use, and
didn't need to be restored after use in S3 resume, but it looks like
the DOS boot vector gets loaded juat above this location, so it SHOULD
be ok. The alternative is to copy the memory out and store it in cbmem
until we're ready to restore it.
2) When a request for the pointer to a CAR variable comes in, pass back
the location inside the FSP hob structure.
3) Skip the memcopy of the CAR Data. The CAR variables do not
get transitioned back into cbmem, but used out of the HOB structure.
4) Remove the BROKEN_CAR_MIGRATE Kconfig option from the FSP platform.
Change-Id: Iaf566dce1b41a3bcb17e4134877f68262b5e113f
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8196
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Rangeley POST-GOLD 2 FSP added PCIe ports de-emphasis configuration
by UPD input. Update UPD_DATA_REGION structure for matching up this
FSP change.
PcdCustomerRevision is a debugging aid that will be output to debug
message in FSP. When needed, it can be customized by BCT tool for tracking
BCT configurations.
Change-Id: I6d4138c9d8bbb9c89f24c77f976dbc760d626a9b
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/8107
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
This fixes the resource allocator locating the PCI register
space below 0xe0000000 thereby causing corruption with more
than ~3.5GB physical RAM on AMD Family 10h systems.
Change-Id: I66d1bfa1e977a6b492c1909079087a801c7e6a3a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8261
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ie39652bded9a42d1d816ca5198db59a83e5c083a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8266
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Fix uninitialized variable when manual non-coherent BUID
selection is used.
Change-Id: Id19745b29486aef5297fdbb3324ae36bf9b8f466
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8267
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Fix three IASL warnings in ASL utility code by making the
methods `GWBM`, `GWEM` and `GIOR` serialized.
TEST: Built and booted on ASUS KFSN4-DRE.
Change-Id: Ia98088bea7e3e21c33252c98a675799d52edb809
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8264
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Remove declaration of unused variable `io`.
Change-Id: I750fc3a135f7634ad16c0f6a1a5bdb16ac702977
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8265
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Drop the implementation of statically allocated high memory
region for CBMEM. There is no longer the need to explicitly
select DYNAMIC_CBMEM, it is the only remaining choice.
Change-Id: Iadf6f27a134e05daa1038646d0b4e0b8f9f0587a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7851
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The name was always obscure and confusing. Instead define cbmem_top()
directly in the chipset code for x86 like on ARMs.
TODO: Check TSEG alignment, it used for MTRR programming.
Change-Id: Ibbe5f05ab9c7d87d09caa673766cd17d192cd045
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7888
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
In preparation to remove the static CBMEM allocator, tag the chipsets
that still do not implement get_top_of_ram() for romstage.
LATE_CBMEM_INIT also implies BROKEN_CAR_MIGRATE.
Change-Id: Iad359db2e65ac15c54ff6e9635429628e4db6fde
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7850
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
If HAVE_ACPI_RESUME ever gets implemented, use CBMEM handoff instead.
Change-Id: I77463988fa5324c729579902f4796be4da15d551
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8182
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Ibf0bd494b2022272cb2d5c4ddb1bdf82ea70ca50
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8250
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Fix multiprocessor support not being compiled in when selected
via Kconfig on AMD systems.
Change-Id: I44c22f2e11096247285b0fb469ccf51963eace2b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8268
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Change-Id: I3175c8b29e94a27a2db6b11f8fc9e1d91bde11f9
Reviewed-on: http://review.coreboot.org/8259
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I83e7605650b13e82a2e6c2822cbd237b4e473b5d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8271
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Icbbba0037c19bdc279813e51c72f54a10e4dc55a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8263
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I1f94171173d0b3d672aebeb0dd901dd292028711
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8199
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This replaces acpi_is_wakeup_early().
Change-Id: I23112c1fc7b6f99584bc065fbf6b10fb073b1eb6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8187
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Place the mrc.cache file at top of CBFS. There is no real requirement
for it to have a fixed location though.
Change-Id: Ibebe848a573b41788c9d84388be8ced68957f367
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7962
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Iad31ae3e511c8ebacc973b2d8a8e3bfca719ee7c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7583
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Trivial; Use tab over space for indent.
Change-Id: Iba0e006197a020157b11746dd4999d87a8ca8d97
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8015
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Remove 'read_mchbar8_bypass()' as 'read_mchbar8()' does the same
thing and 'read_mchbar8_bypass()' is unused.
Change-Id: I0dc2325e6205c38b63e5200c408ece65e4f938dc
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8166
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- @todo has to be lowercase for doxygen
- Fix some parameters that had changed in the code.
- The @file entries needed to be more specific.
Change-Id: Icdce08735f581609cd25cce41e986c71435368a4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8154
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
- Add missing parameter names in several files
- remove parameter types in several files
- remove lines from doxygen documentation. These should be outside the
doxygen comments.
- Some of the comments shouldn't have been doxygen style. Turn these
into regular non-doxygen comments.
Change-Id: Ieccfe237385efee007b48308d58eb0a6a12f5bfa
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8153
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Remove useless comment pretaining to abusing pragma's for old
GCC/GDB interaction issues.
Change-Id: Ic83a0285ac947a23699a81a82b89de08a47ab052
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8017
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*. Back in the day, like more than
half a decade ago, we migrated a lot of boards to printk, but we never
cleaned up the existing code to be consistent. instead, we worked around
the problem with a very messy console.h (nowadays the mess is hidden in
romstage_console.c and early_print.h)
This patch cleans up the northbridge code to use printk() on all non-ROMCC
boards.
Change-Id: I4a36cd965c58aae65d74ce1e697dc0d0f58f47a1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7856
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This reverts commit 9270553fff23462fcb298f154296319bf3639d15.
Change-Id: I195f721ce7a18aac6c1aa6f4e0f9284455d531b0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8138
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Re-factor to_flash_offset() into 'spi_flash.h' header. Motivated by
Clang complaining that the function 'to_flash_offset' is unused.
Change-Id: Ic75fd2fb4edc5e434c199ebd10c7384d197e0c63
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7519
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As `#ifndef` and not `#if` is used in the check for
include guards, setting it to 1 is not needed.
Change-Id: Iaa6c0f807b9e99ad3c9551abe4ab1627e5505d67
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8103
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
This is just bit-rotting and its likely this will continue to rot
by the time someone notices it exits it will be too late (i.e., today).
Change-Id: I40ef2cd8e3d563079b086f51dabab0960a0a13b3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8087
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This doxygen directive was creating a top level modules section, which
had the vx900_int15 code as its only member. I do think that breaking
the code into documented sections is a good plan, but in an effort to
clean up the output, I'm removing this for now.
Change-Id: I3f7e2f704136ebbd1961c5946bac4c2edbd6a371
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8070
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The "((1ull << (sizeof(modules) * 8)) - 1)" statement evaluates to
0xffffffff, but there's no need to AND with that value, as 'modules'
is already 32-bit. The '&&' is most likely a typo, which meant bitwise
and, as indicated by the structure of thus operation.
Remove this superfluous statement. This also fixes a clang warning.
Change-Id: Ie55bd9f8b0ec5fd41e440f56dcedd40c830bf826
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7965
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Callout FCH_OEM_CONFIG is made during AMD_INIT_RESET, so it was required
to provide GetBiosCallOut here too.
Change-Id: I0eab858677d14536293385ca37daab3e538132e6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7826
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Icbad42168ec3afb7780c0c2ddc17aa405e08d693
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7825
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
We should potentially provide an OEM platform hook to manipulate parameters
around any entry point to AGESA. Use structure for such ops to avoid weak
functions and lots of empty function stubs.
Change-Id: I99bf7de8a1e2f183399d2216520a45d0c24fd64c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7824
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Disable TSC output for now.
Change-Id: I078b4f0170aaf0ada58e464cf609c234204f8196
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7822
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I580f975aa987a333074de3d63744ad5f9008377d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7821
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I3d532989559ffd7fd0f63e15c2c60bcfe5ec9101
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7820
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I1b7c95e08d74784e0f144cd5836d46bda64a3596
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7819
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Icc8da62c6d1644e16f7db6c634796ad597c755c6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7818
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I1755796049c2c3f2090cd6a4b4e28a71b807c7c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7817
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Not part of wrapper to AGESA, but workaround for enable_resources().
Also remove remains of comments in non-fam14 wrappers.
Change-Id: I2526821ca283feb6a506b602b86f817f8b03b341
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7816
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
These are not wrappers for AGESA as they do not enter vendorcode at all.
We expect most of the added fixme.c file to be written without use of AMDLIB.h
and parts relocated as northbridge enable_resources().
Change-Id: Iba6d59e2a7672349208e9a65fcd2cb1094ab7d50
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7815
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I4c7fdfb64689cc8ba7e00bd7966d5c5857baf7c3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7814
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Increase to max 64 buses, as there are no benefits of limit 16.
NOTE: It appears there is no matching (early) programming of the
region to non-posted MMIO.
Change-Id: I664789f7bd90992840e5817555cd3621c2d1e86c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7813
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|