summaryrefslogtreecommitdiff
path: root/src/northbridge
AgeCommit message (Expand)Author
2015-08-10intel/i945: don't read structs out of uninitialized pointersPatrick Georgi
2015-08-09AMD K8: Avoid duplicate variables in SSDT on multisocket systemsJonathan A. Kollasch
2015-07-29intel/haswell: fix CHROMEOS builds for haswellPatrick Georgi
2015-07-22intel raminit: rewrite timB high adjust calculationPatrick Rudolph
2015-07-22intel raminit: support two DIMMs per channelPatrick Rudolph
2015-07-21Port Fam14 northbridge code to 64bitStefan Reinauer
2015-07-21Revert "northbridge/amd/pi: Add support for memory settings"Marc Jones
2015-07-20northbridge/amd/pi: Add support for memory settingsDave Frodin
2015-07-17Remove unused Kconfig symbols in c codeMartin Roth
2015-07-14intel/sandybridge/gma: Add graphics PCI Device IDs 0x0162 and 0x0152Damien Zammit
2015-07-14amd/fam10: Add k10temp ACPI thermal zone mixin.Tobias Diedrich
2015-07-13x86: flatten hierarchyStefan Reinauer
2015-07-13intel raminit: improve loggingPatrick Rudolph
2015-07-13intel raminit: fix timB high adjust calculationPatrick Rudolph
2015-07-13intel raminit: whitespace fixesPatrick Rudolph
2015-07-13intel sandybridge: add VGA pci device idPatrick Rudolph
2015-07-12Change #ifdef and #if defined CONFIG_ bools to #if IS_ENABLED()Martin Roth
2015-07-07sandybridge: provide monotonic timer functionPatrick Georgi
2015-07-07northbridge/amd/amdfam10: Remove array to null comparisonTimothy Pearson
2015-07-06Revert "sandy/ivybridge: use LAPIC timer in SMM"Patrick Georgi
2015-07-04Kconfig: Fix references to obsolete symbolsMartin Roth
2015-07-04intel raminit: rename registerPatrick Rudolph
2015-07-02sandy/ivybridge: use LAPIC timer in SMMStefan Reinauer
2015-06-30intel/sandybridge: initialize variablePatrick Georgi
2015-06-28intel raminit: check correct registers in channel_testPatrick Rudolph
2015-06-28intel raminit: properly handle DDR3 DIMMs with address mirroringPatrick Rudolph
2015-06-23Kconfig: Move CBFS_SIZE into Mainboard menuMartin Roth
2015-06-23AMD PI agesawrapper: add PSPP (PCIe Speed Power Policy) interfaceWANG Siyuan
2015-06-23Move same Kconfigs to northbridge/amd/pi/KconfigWANG Siyuan
2015-06-22AMD Merlin Falcon: Add northbridge files for new AMD processorWANG Siyuan
2015-06-22AMD OemS3Save: refactor for Merlin FalconWANG Siyuan
2015-06-13Move remap_bsp_lapic to AMD specific codeStefan Reinauer
2015-06-10PCI subsystem: Drop PCI_64BIT_PREF_MEM optionKyösti Mälkki
2015-06-10northbridge/amd/amdfam10: Increase MMIO hole size to 1GBTimothy Pearson
2015-06-10model_2065x: Use common i945-ivy TSEG SMM init.Vladimir Serbinenko
2015-06-10northbridge/amd/amdmct: Honor MMCONF_BASE_ADDRESSTimothy Pearson
2015-06-10fsp_model_206ax: Use common i945-ivy tseg SMM init.Vladimir Serbinenko
2015-06-09Create i945-ivy smm tseg init based on ivy code.Vladimir Serbinenko
2015-06-08Remove empty lines at end of fileElyes HAOUAS
2015-06-07Removed unused SOUTHBRIDGE_INTEL_FSP_I89XX expressionsMartin Roth
2015-06-05device_ops: add device_t argument to write_acpi_tablesAlexander Couzens
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
2015-06-05lib: Unify log2() and related functionsJulius Werner
2015-06-05AMD K8 fam10: Use parent subordinate to track HT enumerationKyösti Mälkki
2015-06-05AMD K8 fam10: Drop extra HT scan_chain() parametersKyösti Mälkki
2015-06-05AMD K8 fam10: Drop local is_sblink in scan_chainsKyösti Mälkki
2015-06-05AMD K8 fam10: Drop redundant parameters on scan_chain()Kyösti Mälkki
2015-06-05AMD K8 fam10: Refactor HT link connection testKyösti Mälkki
2015-06-05AMD K8 fam10: Always have SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
2015-06-05AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
2015-06-05AMD K8 fam10: Relocate SB_HT_CHAIN in devicetreeKyösti Mälkki
2015-06-05AMD K8: Move SB_HT_CHAIN_ON_BUS0 default 0Kyösti Mälkki
2015-06-05AMD K8 fam10: Refactor logic around SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
2015-06-05AMD K8: Refactor calls for HT configurationKyösti Mälkki
2015-06-05AMD fam10: Refactor calls for HT configurationKyösti Mälkki
2015-06-05AMD K8 fam10: Eliminate local variable min_busKyösti Mälkki
2015-06-05AMD K8 fam10: Fix preprocessor use with SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
2015-06-05AMD K8 fam10: Eliminate local variables busn and max_busKyösti Mälkki
2015-06-05AMD K8 fam10: Add ht_route_link()Kyösti Mälkki
2015-06-05AMD fam10: Fix add_more_linksKyösti Mälkki
2015-06-04devicetree: Change scan_bus() prototype in device opsKyösti Mälkki
2015-06-04PCI subsystem: Drop parameter max from scan_busKyösti Mälkki
2015-06-04devicetree: Rename unused parameter max in domain_scan_bus()Kyösti Mälkki
2015-06-04devicetree: Rename unused parameter to passthruKyösti Mälkki
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
2015-06-04HyperTransport: Use subordinate property to track chain enumerationKyösti Mälkki
2015-06-04HyperTransport: Move pci_scan_bus() callKyösti Mälkki
2015-06-02cbfs: new API and better program loadingAaron Durbin
2015-05-29intel/nehalem/raminit.c: Remove space in `timestamp_add_now(104)`Paul Menzel
2015-05-28Migrate fsp_206ax to SMM_MODULESVladimir Serbinenko
2015-05-28Migrate 206ax to SMM_MODULESVladimir Serbinenko
2015-05-28igd.asl rewriteVladimir Serbinenko
2015-05-27sandybridge native: Add call to TPM code.Vladimir Serbinenko
2015-05-27AGESA: Reduce SPI use by 24kB for S3 supportKyösti Mälkki
2015-05-27AGESA: Separate HeapManager declarations from BiosCallOutsKyösti Mälkki
2015-05-27AGESA: Split S3 backup in CBMEMKyösti Mälkki
2015-05-26fmap: new API using region_deviceAaron Durbin
2015-05-26Make acpi_fill_hest into parameterVladimir Serbinenko
2015-05-26AGESA: Refactor OEM S3 storageKyösti Mälkki
2015-05-26AGESA: Move S3 related SPI writes againKyösti Mälkki
2015-05-26AGESA f16kb: Fix PCI device notationFabian Kunkel
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
2015-05-23AGESA: Drop DIMM_SUPPORT, _DDR3 and _REGISTEREDKyösti Mälkki
2015-05-21Remove address from GPLv2 headersPatrick Georgi
2015-05-20acpi: make fill_slit and fill_srat into arguments.Vladimir Serbinenko
2015-05-19nehalem native gfx init: Adjust state to be compatible with OPROM.Vladimir Serbinenko
2015-05-19ivybridge native gfx init: Adjust state to be compatible with OPROM.Vladimir Serbinenko
2015-05-16i945: Disable check for 2-dimm support.Vladimir Serbinenko
2015-05-13amd/pi: Move AGESA cbfs access into the wrapperMarc Jones
2015-05-08northbridge/intel/gm45/gma: Minor cleanupTimothy Pearson
2015-05-08northbridge/intel/gm45/gma: Add backlight control register fieldTimothy Pearson
2015-05-053rdparty: move to 3rdparty/blobsPatrick Georgi
2015-05-053rdparty: Move to blobsPatrick Georgi
2015-05-01northbridge/intel/fsp_rangeley: Correct MMIO size settingDave Frodin
2015-05-01intel: Correct MMIO related ACPI table settingsDave Frodin
2015-04-30i945/gma: Fix wrong comment about the documentation.Denis 'GNUtoo' Carikli
2015-04-29kbuild: automatically include northbridgesStefan Reinauer
2015-04-28Kconfig whitespace fixesMartin Roth
2015-04-28fsp platforms: consolidate FspNotify callsMartin Roth
2015-04-24fsp: Move fsp to fsp1_0Marc Jones