| Age | Commit message (Collapse) | Author |
|---|
|
PSPP policy is defined in 3rdparty/blobs/pi/amd/*/AGESA.h
/// PCIe PSPP Power policy
typedef enum {
PsppDisabled, ///< PSPP disabled
PsppPerformance = 1, ///< Performance
PsppBalanceHigh, ///< Balance-High
PsppBalanceLow, ///< Balance-Low
PsppPowerSaving, ///< Power Saving
MaxPspp ///< Max Pspp for boundary check
} PCIE_PSPP_POLICY;
Change-Id: I7fe735cddea94a83e38d856a3de1f27735467a28
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10461
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Bettong, Lamar and Olivehill Plus have many same Kconfigs.
Move them to northbridge/amd/pi/Kconfig.
Change-Id: I758d5a09f27eee7a7bd60268a2aaed6f16fd0294
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10421
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Tested on Bettong. Windows 7, Windows 8.1 and Ubuntu 14.04 can boot.
Change-Id: Ifcbfa0eab74875638a40e74ba2a3bb7c4fb02761
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10419
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Merlin Falcon(Carrizo) replaces struct AMD_S3SAVE_PARAMS
with struct AMD_RTB_PARAMS and replaces AMD_S3_PARAMS with
S3_DATA_BLOCK.
Change-Id: If074a8de95d82130d29b2e3cfbd7e35cdb9b929d
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10526
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It's not used outside of very old AMD CPUs.
Change-Id: Ide51ef1a526df50d88bf229432d7d36bc777f9eb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10538
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
No board in the tree selects this and it looks like the implementation
was done at chipset level while it should be part of PCI subsystem.
When enabled, at least AMD K8 and f14, f15tn and f16kb fail build test.
Feature of placing prefetchable PCI memory above 4GB may not work if
there is any 32-bit only prefetchable PCI BARs in the system.
Change-Id: I40ded2c7d6d05f461423721aa5d78a78f9f9ce1e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8705
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On modern mainboards with multiple PCI-e devices and a single
graphics card the default MMIO hole size of 512M is inadequate,
leading to resource-hungry PCI-e devices (such as an external
graphics card) being assigned invalid MMIO ranges. This, in
turn, causes the entire PCI subsystem to become unavailable,
leading to a failure to boot.
TEST: Booted KGPE-D16 with NVIDIA 7300LE and verified proper
operation of PCI/PCI-e devices, including text mode VGA operation
via the add-on card and its VGA option ROM.
Change-Id: I8d25f4b19f2d0860644ab1ee002c15041437121f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/10428
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I0302cbaeb45a55a4cfee94692eb7372f2b6b206d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10468
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The MMIO hole start address was hardcoded on AMD Family 10h
systems. Use the MMCONF_BASE_ADDRESS Kconfig setting instead.
Change-Id: I204e904d96d14e99529fa5e524fd73e6ea256dc0
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/10427
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Iac390b565d709b11bc7a6631b11315994b6e2c3c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10466
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
CPU-side logic is unchanged for this range of CPUs as long as all of them
use TSEG (or ASEG, just needs to be consistent). So uplift 206ax code while
extracting southbridge and APIC code into separate functions.
Change-Id: Ib365681d1da8115922c557fddcc59afc156826da
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10465
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The SOUTHBRIDGE_INTEL_FSP_I89XX symbols are never defined in any Kconfig
file or used anywhere in the existing coreboot tree. Removing them as
unnecessary. If the southbridge code ever gets uploaded, these can be
re-added at that point.
Change-Id: I36f9ca8e25e08ce154d10ea9d764a73095590244
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10436
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9599
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9598
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds a few bit counting functions that are commonly needed
for certain register calculations. We previously had a log2()
implementation already, but it was awkwardly split between some C code
that's only available in ramstage and an optimized x86-specific
implementation in pre-RAM that prevented other archs from pulling it
into earlier stages.
Using __builtin_clz() as the baseline allows GCC to inline optimized
assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and
to perform constant-folding if possible. What was previously named log2f
on pre-RAM x86 is now ffs, since that's the standard name for that
operation and I honestly don't have the slightest idea how it could've
ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm
with Float result, whereas the Find First Set operation has no direct
correlation to logarithms that I know of). Make ffs result 0-based
instead of the POSIX standard's 1-based since that is consistent with
clz, log2 and the former log2f, and generally closer to what you want
for most applications (a value that can directly be used as a shift to
reach the found bit). Call it __ffs() instead of ffs() to avoid problems
when importing code, since that's what Linux uses for the 0-based
operation.
CQ-DEPEND=CL:273023
BRANCH=None
BUG=None
TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new
log2() and __ffs() results on Falco for a bunch of test values.
Change-Id: I599209b342059e17b3130621edb6b6bbeae26876
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f
Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/273008
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I930f2beacdc95d0a7edd07db66a1c2e58bb2f3cd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8566
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: Ice7cb89c19585cf725b6f73c33443050f8d65418
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8565
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
We can define is_sblink = (max == 0) as sblink is always the
very first chain we scan.
Change-Id: Ibd6b3ea23954ca919ae148604bca2495e9f8753b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8564
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I6041b666e6792cf97b8273ed54832d86af8ed23e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8563
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I1e935a6b848a59f7f2e58779bceea599032de9e3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8562
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I65fad1cfba95f0ee1ed3f7f7a57d874144da1e40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8561
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
If SB_HT_CHAIN_ON_BUS0 is selected, HyperTransport chain for System Bus
is the first to scan and it will be assigned with bus number 0.
If HT_CHAIN_DISTRIBUTE is selected, each link will reserve a fixed range
of bus numbers instead of assigning consecutive numbers across all the links.
All fam10 have SB_HT_CHAIN_ON_BUS0 selected under northbridge.
Follow-up can easily drop this if we find this is dictated by architecture.
Change-Id: I8deddcb4c3fd679b6b27e2879d9dba3895c4dd6f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8366
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
When we want to scan the HT chain to southbridge first, we
relocate it as the first item of dev->link_list of node 0.
Change-Id: Ic73ba43aadb3c5e0c8d4b82ed7d41094692ea37f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8560
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Define the default value under northbridge. The list of boards this
patchset touches will change to use SB_HT_CHAIN_ON_BUS0 with
follow-up patch.
Based on code analysis, these boards already scan system bus
as the first (active) HT chain, so it is placed as bus 0
even when this option was not explicitly selected.
Change-Id: I5a00d6372cb89151940aeee517ea613398825c78
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8353
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I452a93af452073eeac4e6cb9bbc232dc59e911c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8365
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I24ca1dce025e00064f9209affa27586292c7650e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8559
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: Ic8fbafdfadbc4ef0896d93e61c8a54ce69297e07
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8558
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Some cases of max==0xff wrapping around the 8-bit link->secondary
register remain to be solved.
Change-Id: I01e2ab6b2f23a03dbac49207ab584eccd1ca9b1f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8364
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I6bbd1b5eaa66a640e0a2e132c8d67f38f103caf5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8352
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I297de09dcf93511acece4441593ef958a390fddb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8362
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I41aeb80121f120641b65759c8502150ce89caa30
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8556
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
One PCI function may contain upto 4 links, further links must
be added to PCI function 4 on the same device.
There is no requirement that in dev->link_list the last element
would have the highest link->link_num.
Also fix off-by-one error when allocating for more links.
Change-Id: If7ebdd1ad52653d3757b5930bd0a83e2cf2fcac6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8555
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
The input/output value max is no longer used for tracking the
bus enumeration sequence, everything is handled in the context
of devicetree bus objects.
Change-Id: I545088bd8eaf205b1436d8c52d3bc7faf4cfb0f9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8541
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib33d3363c8d42fa54ac07c11a7ab2bc7ee4ae8bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8539
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For the PCI root node, input parameter max==0 and output value
max is not relevant for operation.
Change-Id: I23adab24aa957c4d51d703098a9a40ed660b4e6c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8855
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
The actual use of the parameter max is to keep track of PCI bus
number while recursively scanning PCI bridges or PCI-e rootports.
Neither CPU, SMBus, LPC or other static buses are involved in this
enumeration, but the way bridge operations were originally designed
forced to pass this argument thru unrelated functions.
Follow-up removes these once the function prototype gets fixed.
Change-Id: Idbc9c515a362c571a1798bb36972058b309c2774
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8535
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Use of scan_static_bus() and tree traversals is somewhat convoluted.
Start cleaning this up by assigning each path type with separate
static scan_bus() function.
For ME, SMBus and LPC paths a bus cannot expose bridges, as those would
add to the number of encountered PCI buses.
Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8534
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
For amdfam10, (ht_c_index > 3) never evaluates true as the code
already has a return for this case above.
Change-Id: Ie90941671e1b2b4f42e2b1b0641ca59334fcf0f1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8688
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Allows to remove parameter max from the call, it is not involved
with the unitid assignment.
Change-Id: I087622f4ff69474f0b27cfd8709106ab8ac4ca98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8687
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
A new CBFS API is introduced to allow making CBFS access
easier for providing multiple CBFS sources. That is achieved
by decoupling the cbfs source from a CBFS file. A CBFS
source is described by a descriptor. It contains the necessary
properties for walking a CBFS to locate a file. The CBFS
file is then decoupled from the CBFS descriptor in that it's
no longer needed to access the contents of the file.
All of this is accomplished using the regions infrastructure
by repsenting CBFS sources and files as region_devices. Because
region_devices can be chained together forming subregions this
allows one to decouple a CBFS source from a file. This also allows
one to provide CBFS files that came from other sources for
payload and/or stage loading.
The program loading takes advantage of those very properties
by allowing multiple sources for locating a program. Because of
this we can reduce the overhead of loading programs because
it's all done in the common code paths. Only locating the
program is per source.
Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9134
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fix up commit c6f6be09 (Support for nehalem northbridge) to follow the
coreboot/Linux kernel coding style.
Change-Id: Ibf4f272ad54e6fef0b297189651f2bcf888b5b26
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10347
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
This gets rid of ugly tseg_relocate for fsp_bd82x6x.
This is adaptation of a3e41c089602c58409e8dfd4aceecbdd7d4f4a5b
Change-Id: I4e80e6e98d3a6da3e3e480e9368fae1b3ed67cd6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10353
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This gets rid of ugly tseg_relocate for bd82x6x.
This is backport of 29ffa54969414b833de5c61b507b061f920d650b to bd82x6x.
Change-Id: I0f52540851ce8a7edaac257a2aa83d543bb5e530
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10351
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Old igd.asl had inconsistent addresses (between _DOD and actual device)
and ghost devices. Any of those is enough to make brightness on windows
fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous
copying of the same thing 6 times per chipset. Leave only hooking up and
chipset-specific part in chipset directory. Move NVS handling and ACPI-spec
parts to a common file.
Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7472
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
This allows to deactivate TPM on boards using native sandy/ivy init.
Change-Id: I9455179c7b51097a3a9554c16a407365fbc65e6f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10272
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
There is no need to backup VolatileStorage in SPI flash at all.
At the time we need it, we have CBMEM available.
Change-Id: If0ca57b314140a833d6d59fe9e236e07816f05a4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10318
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Change-Id: I168db92b10d5abc05be2dc374df3f892003d5255
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10317
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Use separate CBMEM allocations for stack and heap on S3 resume path.
The allocation of HIGH_SCRATCH_MEMORY is specific to AGESA and is moved
out of globals and ACPI. This region is a replacement for BIOS_HEAP_SIZE
used on non-resume paths.
Change-Id: I6658ce1c06964de5cf13b4e3c84d571f46ce76f3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10316
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of being pointer based use the region infrastrucutre.
Additionally, this removes the need for arch-specific compilation
paths. The users of the new API can use the region APIs to memory
map or read the region provided by the new fmap API.
Change-Id: Ie36e9ff9cb554234ec394b921f029eeed6845aee
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9170
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This avoids the need to supply weak function and avoids associated risks of
forgetting to link in relevant files.
Change-Id: Ie96475babb4aa4ea8db49023af5b31bfa63b21dc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7373
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
Use function prototypes that match more closely with the structure
of other OEM hooks in agesawrappers.
Change-Id: Id241fdce78a21a5138ef60ac2f841b694da92241
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8606
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
This is more agesawrapper-related code than CPU.
Change-Id: I3058ef965a83aed1972e02f0f566f81d5dbd7adf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10295
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Old file defines wrong PCI devices (1.2 2.2 3.2 4.2 5.2).
Wrong defines cause PCI devices not to be found in the pirq_data table.
Example error output:
PCI IRQ: Found device 0:02.01 using PIN A
PCI Devfn (0x11) not found in pirq_data table
PCI IRQ: Found device 0:02.02 using PIN B
Found this device in pirq_data table entry 3
Orig INT_PIN : 2 (PIN B)
PCI_INTR idx : 0x02 (INTC# )
INT_LINE : 0xA (IRQ 10)
PCI IRQ: Found device 0:02.03 using PIN C
PCI Devfn (0x13) not found in pirq_data table
PCI IRQ: Found device 0:02.04 using PIN D
PCI Devfn (0x14) not found in pirq_data table
PCI IRQ: Found device 0:02.05 using PIN A
PCI Devfn (0x15) not found in pirq_data table
Patch fixes, that pirq_data entries for pci devices 2.1 - 2.5 get found.
Change-Id: I4503433427f4ec90d022b65084c52077ba4f3511
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: http://review.coreboot.org/10289
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
All boards now use per-device ACPI. This patch finishes migration
by removing transitional kludges.
Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7372
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Not referenced anywhere.
Change-Id: I57180ccfab93e45df9982d08bad71834a04eb9f9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10280
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
SLIT and SRAT are created this way only on amdk8 and amdfam10.
This saves the need of having a lot of dummies.
Change-Id: I76d042702209cd6d11ee78ac22cf9fe9d30d0ca5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7052
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
My main payload is GRUB and I load SeaBIOS as secondary payload when for some
reason I want to boot windows. In this scenario SeaBIOS runs VGA oprom
(SeaVGABIOS is not good enough with intel gfx). VGA oprom expects either
completely uninited gfx or some special state in gmbus and software scratch
registers. Provide this state.
The only alternative without this patch for such usecase is to use oprom and
I'd like to avoid doing so when going my main boot path to GNU/Linux.
Change-Id: Ic157a6a580d7a5048ac28155e0d6b3433bbd1f2c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10239
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
My main payload is GRUB and I load SeaBIOS as secondary payload when for some
reason I want to boot windows. In this scenario SeaBIOS runs VGA oprom
(SeaVGABIOS is not good enough with intel gfx). VGA oprom expects either
completely uninited gfx or some special state in gmbus and software scratch
registers. Provide this state.
The only alternative without this patch for such usecase is to use oprom and
I'd like to avoid doing so when going my main boot path to GNU/Linux.
Change-Id: I38e78fb845e43b81df084cd4d65f4618bfb2506d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10205
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The check is wrong. On Acer Aspire One it returns 0 despite 2 DIMMs working
fine on the same channel if this check is disabled (tested by memtest).
On boards that have only 1 DIMM per channel, the code will simply find no
SPD and skip empty slot.
Change-Id: I5f2fdcd1d948ebf3eabebaea4441af4c19e47f8f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7568
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The AGESA.c file in 3rdparty has cbfs access functions
for locating the AGESA binaries. coreboot access functions
need to be within coreboot where they can be updated with
cbfs changes. Move the offending function to coreboot.
Change-Id: Ibf6136d04dfbdb0198e90cc3ce719dc286c5610e
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10058
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1.) Removed invalid set of TRANS_STATE_MASK bit
2.) Used i915 register defines to clarify code
Change-Id: I08d016e9d66b5eeea8f2174abaa35a98e2b4eca3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9329
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This allows the backlight control register to be set via devicetree.cb
Change-Id: I32b42dfc1cc609fb6f8995c6158c85be67633770
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9330
Tested-by: build bot (Jenkins)
|
|
There's now room for other repositories under 3rdparty.
Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10109
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
To move 3rdparty to 3rdparty/blobs (ie. below itself
from git's broken perspective), we need to work around
it - since some git implementations don't like the direct
approach.
Change-Id: I1fc84bbb37e7c8c91ab14703d609a739b5ca073c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10108
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Rangeley chipset has the MMIO PCI config space feature
enabled at 0xe0000000-0xefffffff. This is a 256MB space
which covers all of config space. The ACPI table for
this space only defines it as being 64MB. This change
fixes that setting.
Change-Id: I8205a9b89ea6633ac6c4b0d5a282cd2745595b2e
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/10047
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
Several of the intel platforms define the region reserved
for PCI memory resources in a location where it overlaps
with the MMIO (MCFG) region.
Using the memory map from mohon_peak as an example:
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
1. 0000000000001000-000000000009ffff: RAM
2. 00000000000a0000-00000000000fffff: RESERVED
3. 0000000000100000-000000007fbcffff: RAM
4. 000000007fbd0000-000000007fbfffff: CONFIGURATION TABLES
5. 000000007fc00000-000000007fdfffff: RESERVED
6. 00000000e0000000-00000000efffffff: RESERVED
7. 00000000fee00000-00000000fee00fff: RESERVED
8. 0000000100000000-000000017fffffff: RAM
The ACPI table describing the space set aside for PCI memory
(not to be confused with the MMIO config space) is defined
as the region from BMBOUND (the top of DRAM below 4GB) to
a hardcoded value of 0xfebfffff. That region would overlap
the MMIO region at 0xe0000000-0xefffffff. For rangeley
the upper bound of the PCI memory space should be set
to 0xe0000000 - 1.
The MCFG regions for several of the affected chipsets are:
rangeley 0xe0000000-0xefffffff
baytrail 0xe0000000-0xefffffff
haswell 0xf0000000-0xf3ffffff
sandybridge 0xf8000000-0xfbffffff
TEST = intel/mohonpeak and intel/bayleybay.
Change-Id: Ic188a4f575494f04930dea4d0aaaeaad95df9f90
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/9972
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
The GTT location is documented in the "309219" datasheet.
For instance it can be found in the TOLUD register description.
The 309219 datasheet is for the
"Mobile Intel® 945 Express Chipset Family". It was published in 2008.
Change-Id: I75ac095ebc577e031af566963ebffe9ed2587c96
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/9622
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This change switches all northbridge vendors and southbridges
to be autoincluded by Makefile.inc, rather than having to be
mentioned explicitly in northbridge/Makefile.inc or in
northbridge/<vendor>/Makefile.inc.
This means, vendor and northbridge directories are now "drop
in", e.g. be placed in the coreboot directory hierarchy
without having to modify any higher level coreboot files.
The long term plan is to enable out of tree components to be
built with a given coreboot version (given that the API did not
change).
Change-Id: I8468154dbfaaaffcba9fda27ba2d7b9049ad5c19
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9800
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
trivial whitespace fixes. Mostly changing leading spaces to tabs.
Change-Id: I0bdfe2059b90725e64adfc0bdde785b4e406969d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10000
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Consolidate the FspNotify calls into the FSP driver directory,
using BOOT_STATE_INIT_ENTRY to set up the call times.
Change-Id: I184ab234ebb9dcdeb8eece1537c12d03f227c25e
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/9780
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Prepare for FSP 1.1 integration by moving the FSP to a FSP 1.0 specific
directory. See follow-on patches for sharing of common code.
Change-Id: Ic58cb4074c65b91d119909132a012876d7ee7b74
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/9970
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use 'DEVICE_NOOP' macro introduced in:
commit 530355d include/device/device.h: Provide DEVICE_NOOP macro shim
to provide formalism. Make the null device ops here explicit and
in-line with formalism elsewhere.
Change-Id: I2400b29a5108a6bae21959177e53321810ca1407
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8035
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
With kconfig understanding wildcards, we don't need
Kconfig files that just include other Kconfig files
anymore.
Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9298
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Restructure get_option() calls to avoid unnecessary return value checks
by pre-assigning defaults to the options being retrieved.
Change-Id: I9159afe149a8eeed0785d1efd6eee8420b88b8f4
Signed-off-by: Varad Gautam <varadgautam@gmail.com>
Reviewed-on: http://review.coreboot.org/8631
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The nehalem smi finalize handler was just copied from sandybridge,
without even changing the function name.
TEST=Built and tested on x201t with additional patch to use finalizers
Change-Id: Ifb44eeaaa6e03556deeb5d12ed1147e02d6d6eb9
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8292
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
Instead of keeping this separate variable around, add linker scripts
to the $(class)-y source lists and let the build system sort things out.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I4af687becf2971e009cb077debc902d2f0722cfb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9289
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
TEST: Booted ASUS KFSN4-DRE and verified SMBIOS contents
via dmidecode utility.
Change-Id: Id656f2f6cf5a4ecafa03e150ad91f69107a4fe88
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9140
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
src/northbridge/amd/amdfam10: Add amdmct_cbmem_store_info()
function.
Change-Id: I07376e276e3e9e3247d2576a09e58780d32a3a76
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9138
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
In commit 72a8e5e751a7fa97c9d198f68cad49f9d9851669 the
Makefile's were updated to use named types for cbfs
file addition. However, the call sites were not checked to
ensure the types matched. Correct all call sites to use the
named types.
Change-Id: Ib9fa693ef517e3196a3f04e9c06db52a9116fee7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9195
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
1.) Allow MCT information structures to be copied to cbmem.
2.) Retrieve DIMM vendor, model, and serial information.
3.) Allow maximum installable memory to be set via devicetree.
Change-Id: I0aecd2fb69ebad0a784c01d40ce211f6975a3ece
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9137
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This allows safe access of romstage MCT values from ramstage
Change-Id: I229b19a64f7f148f970ec86dde7f4b6a62469064
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9158
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These binaries were being added to CBFS using hexadecimal values instead
of the CBFS binary type names. The same value was being used in
different places for different things.
For example, the value 0xAB is used for SPDs, MRC & FSP binaries.
This patch uses CBFS type names instead of hex values everywhere a
hex value was previously used.
Change-Id: Id5ac74c3095eb02a2b39d25104a25933304a8389
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8978
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
We have .lb, .lds, and .ld in the tree. Go for .ld everywhere.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I3126af608afe4937ec4551a78df5a7824e09b04b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9107
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I973abf2224762bf7a53d71177544ade15db50cba
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8856
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
mainboards/amd/fam10: Initialize cbmem area after raminit
When GFXUMA is enabled, CBMEM is placed at TOM - UMASIZE
When GFXUMA is disabled, CBMEM is placed at TOM
This matches the behaviour present before conversion to early
CBMEM.
The CBMEM location code implicitly assumes TOM does not change
between romstage and ramstage. TOM is set by romstage raminit,
and is never changed by romstage or ramstage afterward. As
the CBMEM location is positioned at a specific offset from TOM
that is known to both romstage and ramstage early CBMEM is safe
on Fam10h systems.
TEST: Booted ASUS KFSN4-DRE and verified both cbmem timestamp
tables from romstage and cbmem log tables from ramstage.
Change-Id: Idf9e0245fe91185696ff664b06182c26b376c196
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8489
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
The CBMEM memory segment is always placed at TOM - UMASIZE when GFXUMA
is enabled, however when GFXUMA is disabled an attempt was made to locate
the CBMEM memory segment above the I/O hole in certain rare cases.
Removing this special case does not impact functionality, and paves
the way for early CBMEM support.
Change-Id: I98d29ab9d601a4e20f58e2cd0a66abb13b494e74
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8664
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Aaron Durbin <adurbin@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
The GCC 4.9.2 update showed that the boot_state_init_entry
structures were being padded and assumed to be aligned in to an
increased size. The bootstate scheduler for static entries,
boot_state_schedule_static_entries(), was then calculating the
wrong values within the array. To fix this just use a pointer to
the boot_state_init_entry structure that needs to be scheduled.
In addition to the previous issue noted above, the .bs_init
section was sitting in the read only portion of the image while
the fields within it need to be writable. Also, the
boot_state_schedule_static_entries() was using symbol comparison
to terminate a loop which in C can lead the compiler to always
evaluate the loop at least once since the language spec indicates
no 2 symbols can be the same value.
Change-Id: I6dc5331c2979d508dde3cd5c3332903d40d8048b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8699
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is required for early CBMEM support.
Change-Id: I31d9b6a04ef963a7d3e045d9c5201ae64604218a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8663
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This removes the mainboard agesawrapper.c file from binarypi
based boards and creates a common one.
Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8671
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This makes the change to the cpu/amd/pi/00730F01 that was
made for the cpu/amd/agesa based boards in:
commit 48518f0d
AGESA: Add amd_initcpuio() and amd_initmmio()
These are not wrappers for AGESA as they do not enter vendorcode at all.
We expect most of the added fixme.c file to be written without use of AMDLIB.h
and parts relocated as northbridge enable_resources().
The equivalent change has already been made for cpu/amd/pi/00630F01.
Change-Id: I591b50ee807436f5a1dee14d2c88a77462024744
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8670
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Tested on an X60, Native graphics init still works perfectly.
Change-Id: I91be3baa658e0332028c512c5a4cb0aee07d540a
Signed-off-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-on: http://review.coreboot.org/8696
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
GIT hash 586d6e introduced a regression that causes boot failure
with an f0011449 AMD stop code.
Change-Id: Ieced9088b79bc89d55117b7240b82a086eff9d21
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8685
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This is useful when the PCB layout of a mainboard does not allow
stable operation at the increased HyperTransport speeds of newer
processors.
Change-Id: Idc93a1294608178ddf38ca72d40e6bad7deb9004
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8464
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This capability means:
FERR messages are sent out on system detected an
unmasked floating point x87 FPU error.
Even though this capability is supported on nehalem it doesn't
make sense to set it in early stage. This MSR
has a core scope which results in an unsync MSR because
it's not set on other cores than the BSP.
Found-by: BITS
Tested-on: lenovo thinkpad x201t
Change-Id: Ief3c04f57ac69e7289fbd37dbc3fd239f9098155
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8659
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There is nothing platform specific in retrieving S3 resume state from
romstage_handoff structure. Boards without EARLY_CBMEM_INIT update
acpi_slp_type from ACPI power-management block or scratchpad registers.
Change-Id: Ifc3755f891a0810473b3216c1fec8e45908fc1ab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8188
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Commit 2e0cf14 corrected this for pi/00730F01/northbridge.c.
This commit fixes it for pi/00630F01/northbridge.c.
Found-by: Clang
Change-Id: I4eb93a07aacf6ffc5a159222117e7c934d85859e
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8289
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Also fix a typo in a config option for SteppeEagle.
Change-Id: Iad51cc917217aa0eac751dc805c304652d20e066
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7247
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
All boards in tree use 0. Looks like this is all work that was
never completed and tested.
We also have static setting sysconf.segbit=0 which would conflict
with PCI_BUS_SEGN_BITS>0.
Having PCI_BUS_SEGN_BITS>0 would also require PCI MMCONF support
to cover over 255 buses.
Change-Id: I060efc44d1560541473b01690c2e8192863c1eb5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8554
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
