summaryrefslogtreecommitdiff
path: root/src/northbridge/via
AgeCommit message (Collapse)Author
2017-05-27Kconfig: Move CONFIG_VIDEO_MBNico Huber
Via/VX800 was the last chip not defining it. Change-Id: Idd03f48bed881a5846b1bb3bf29254450d6cff3b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-27CBMEM: Clarify CBMEM_TOP_BACKUP function usageKyösti Mälkki
The deprecated LATE_CBMEM_INIT function is renamed: set_top_of_ram -> set_late_cbmem_top Obscure term top_of_ram is replaced: backup_top_of_ram -> backup_top_of_low_cacheable get_top_of_ram -> restore_top_of_low_cacheable New function that always resolves to CBMEM top boundary, with or without SMM, is named restore_cbmem_top(). Change-Id: I61d20f94840ad61e9fd55976e5aa8c27040b8fb7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-04-14northbridge/via/cn700/acpi: Add the host bridgeLubomir Rintel
Includes the DRAM controller device that knows which where the division between addresses routed to the main memory and to the PCI bus is. Change-Id: Id4cfeb8ff32de37723eee68a61c576e657dad30b Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18896 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-14northbridge/via/cn700: Add a default VGA BIOS idLubomir Rintel
This is the actual PCI Id of the internal graphics. Change-Id: I2a25ed35a5b01de6da905619fa9fce96738d1c0e Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18895 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-14northbridge/via/cn700: Add IORESOURCE_BRIDGE resources to AGP bridgeLubomir Rintel
Without them the BS_DEV_RESOURCES stage won't traverse the bridge and the graphics controller would be left without resources assigned. Even worse, the resources would stay based in offset 0 which confuses the MTRR setting code and causes a good chunk of the DRAM to be set to type write combining. With the patch applied, the resources are set: Show resources in subtree (Root Device)...After assigning values. ... PCI: 00:01.0 child on link 0 PCI: 01:00.0 + PCI: 00:01.0 resource base ffff size 0 align 0 gran 0 limit ffff flags 60080100 index 0 + PCI: 00:01.0 resource base f8000000 size 4000000 align 26 gran 0 limit fbffffff flags 60081200 index 1 + PCI: 00:01.0 resource base fc000000 size 1010000 align 24 gran 0 limit fd00ffff flags 60080200 index 2 PCI: 01:00.0 - PCI: 01:00.0 resource base 0 size 4000000 align 26 gran 26 limit ffffffff flags 1200 index 10 - PCI: 01:00.0 resource base 0 size 1000000 align 24 gran 24 limit ffffffff flags 200 index 14 - PCI: 01:00.0 resource base 0 size 10000 align 16 gran 16 limit ffffffff flags 2200 index 30 + PCI: 01:00.0 resource base f8000000 size 4000000 align 26 gran 26 limit fbffffff flags 60001200 index 10 + PCI: 01:00.0 resource base fc000000 size 1000000 align 24 gran 24 limit fcffffff flags 60000200 index 14 + PCI: 01:00.0 resource base fd000000 size 10000 align 16 gran 16 limit fd00ffff flags 60002200 index 30 And the caching mode is set properly: MTRR: Physical address space: -0x0000000000000000 - 0x0000000004000000 size 0x04000000 type 1 -0x0000000004000000 - 0x000000000e000000 size 0x0a000000 type 6 -0x000000000e000000 - 0x0000000100000000 size 0xf2000000 type 0 +0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 +0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 +0x00000000000c0000 - 0x000000000e000000 size 0x0df40000 type 6 +0x000000000e000000 - 0x00000000f8000000 size 0xea000000 type 0 +0x00000000f8000000 - 0x00000000fc000000 size 0x04000000 type 1 +0x00000000fc000000 - 0x0000000100000000 size 0x04000000 type 0 The problem was also spot and discussed here: http://coreboot.coreboot.narkive.com/E9eGauzH/via-c7-on-bcom-winnet-p680-l1-l2-cache-very-slow Change-Id: Idb4979b206838dd6455b2a16de14dc74f83af921 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18894 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-14northbridge/via/cn700: Add some delays during raminitLubomir Rintel
Otherwise, it locks up quickly. Not sure which ones are actually needed and why, couldn't bisect it into removing even a single one. The factory BIOS on a Neoware G170 does 200 0xed reads between setting the registers too. Change-Id: I6aa38768d84dd42c9c720c917a99e6b4b1e03427 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18893 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-06northbridge/via/cn700: Get rid of #include raminit.cLubomir Rintel
Using linker instead of '#include *.c'. Change-Id: Ie1bc538aa29c4f18dd6f31a83d3da58f196f2078 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/19081 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-03-23northbridge/via/vx900: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/via/vx900. Change-Id: I04292a6b698a42a5c582eddcef7cf5a235e1a464 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17317 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-10device/dram/ddr2: Add common ddr2 spd decoderPatrick Rudolph
Decode DDR2 SPD similar to DDR3 SPD decoder to ease readability, reduce code complexity and reduce size of maintainable code. Rename dimm_is_registered to spd_dimm_is_registered_ddr3 to avoid compilation errors. Change-Id: I741f0e61ab23e3999ae9e31f57228ba034c2509e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18273 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2016-12-08buildsystem: Drop explicit (k)config.h includesKyösti Mälkki
We have kconfig.h auto-included and it pulls config.h too. Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17655 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-07MMCONF_SUPPORT: Consolidate resource registrationKyösti Mälkki
Change-Id: Id727270bff9e0288747d178c00f3d747fe223b0f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17695 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-15northbridge/via/vx800: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/via/vx800. Change-Id: I14a2b4d847f8aeb327d90f385dea998779fae24f Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17316 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15northbridge/via/cx700: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/via/cx700. Change-Id: I6e25f898ab55ee959f1b3b8aba9616c3ba18986d Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17315 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-18northbridge/via/vx800: Convert 'for (;;)' to 'die'Elyes HAOUAS
Change-Id: I3f99190401d8df1415328da9c3b928194593901c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16989 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-09src/northbridge/via: Remove commented codeElyes HAOUAS
Change-Id: Ic589b26c6c94df12e1fe218d079018db8b38fbd9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16898 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04src/northbridge: Remove unnecessary whitespaceElyes HAOUAS
Change-Id: Ib06ecd083f00c74f1d227368811729d2944dd1ef Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16851 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01northbridge/via/cn700: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/via/cn700. Change-Id: Ib7761697daad3c459f3568e5158f925199bcd919 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16689 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-20northbridge/via: Add space around operatorsElyes HAOUAS
Change-Id: I87f8978b8ec6ddc11dd66a77cbb630e057f9831b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16623 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-09-12src/northbridge: Improve code formattingElyes HAOUAS
Change-Id: Iffa058d9eb1e96a4d1587dc3f8a1740907ffbb32 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16414 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31northbridge/via: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: Ic644cf6792a5d360527e48e04c74ae92be0d1d4f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16284 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23src/northbridge: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I6a533667c7c8ff5ec6ab9d4e1cfc51e993a90084 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16280 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31src/northbridge: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: I5aa27f06f82a8309afb6e06c9e462e5792aa9986 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15940 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-19kbuild: Allow drivers to fit src/drivers/[X]/[Y]/ schemeStefan Reinauer
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make them pluggable. Also, fix up the following driver subdirectories by switching to the src/drivers/[X]/[Y]/ scheme as these are hard requirements for the main change: * drivers/intel * drivers/pc80 * drivers/dec Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14047 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01drivers/pc80: Add PS/2 mouse presence detectTimothy Pearson
On certain Winbond SuperIO devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. Add auxiliary channel PS/2 device presence detect, and update the Winbond W83667HG-A driver to flag the auxiliary channel as disabled if no device was detected. Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28via/cx700: Use zeroptr over 0Patrick Georgi
This eliminates all "ud2" instances from romstage disassembly. Change-Id: I3b0c8322a4ca4a851b0cce8f3941425d9cb30383 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/13488 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-30x86 chipsets: Link non-code flow CHIPSET_BOOTBLOCK_INCLUDE filesAlexandru Gagniuc
Non-code flow assembly stubs do not have to be included in bootblock.S, now that we have more freedom in bootblock linking. Rather than bringing these stubs to the config system, just link them in the bootblock. Note that we cannot fully remove CHIPSET_BOOTBLOCK_INCLUDE at this point, as some intel SOCs use this stub for code flow. objdump -h build/cbfs/fallback/bootblock.debug on a few random boards confirms that the appropriate sections are still included in the final binary. Change-Id: Id3f9ece14e399c1cc83090f407780c4a05a076f0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/11856 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-11via/cx700: Fix hidden compile error and make sure it won't hide againPatrick Georgi
A wrong function name made an #ifdef'd code path not compile. Fix that, and also use IS_ENABLED() to make sure that such issues won't come up again there. Change-Id: Iccb98842dde498cce32cd86a770e22a506ad4cc2 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/12296 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-03via/cx700: remove unused #definePatrick Georgi
Change-Id: I0180e0ae2aeeffcef46a97892356f1955f581efd Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/12295 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-07x86/bootblock: Use LDFLAGS_bootblock to enable garbage collectionAlexandru Gagniuc
The x86 bootblock linking is a mess. The bootblock is treated in a very special manner, and never received the update to link-time garbage collection. On newer x86 platforms, the boot media is no longer memory-mapped. That means we need to do a lot more setup in the bootblock. ROMCC is unsuitable for this task, and walkcbfs only works on memory-mapped CBFS. We need to revise the x86 bootflow for this new case. The approach this patch series takes is to perform CAR setup in the bootblock, and load the following stage (either romstage or verstage) from the boot media. This approach is not new, but has been done on our ARM ports for years. Since we will be adding .c files to the bootblock, it is prudent to use link-time garbage collection. This is also consistent to how we do things on other architectures. Unification FTW! Change-Id: I16b78456df56e0053984a9aca9367e2542adfdc9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11781 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-09x86: bootblock: remove linking and program flow from build systemAaron Durbin
The build system was previously determining the flow and linking scripts bootblock code by the order of files added to the bootblock_inc bootblock-y variables.Those files were then concatenated together and built by a myriad of make rules. Now bootblock.S and bootblock.ld is added so that bootblock can be built and linked using the default build rules. CHIPSET_BOOTBLOCK_INCLUDE is introduced in order to allow the chipset code to place include files in the path of the bootblock program -- a replacement for the chipset_bootblock_inc make variable. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built vortex, rambi, and some asus boards. Change-Id: Ida4571cbe6eed65e77ade98b8d9ad056353c53f9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11495 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
Use of scan_static_bus() and tree traversals is somewhat convoluted. Start cleaning this up by assigning each path type with separate static scan_bus() function. For ME, SMBus and LPC paths a bus cannot expose bridges, as those would add to the number of encountered PCI buses. Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-29kbuild: automatically include northbridgesStefan Reinauer
This change switches all northbridge vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in northbridge/Makefile.inc or in northbridge/<vendor>/Makefile.inc. This means, vendor and northbridge directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: I8468154dbfaaaffcba9fda27ba2d7b9049ad5c19 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9800 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-07kconfig: drop intermittend forwarder filesStefan Reinauer
With kconfig understanding wildcards, we don't need Kconfig files that just include other Kconfig files anymore. Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9298 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-04build system x86: deprecate bootblock_lds and ldscripts variablesPatrick Georgi
Instead of keeping this separate variable around, add linker scripts to the $(class)-y source lists and let the build system sort things out. This is inspired by the commit listed below, but rewritten to match upstream, and split in smaller pieces to keep intent clear. Change-Id: I4af687becf2971e009cb077debc902d2f0722cfb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org> Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170 Reviewed-on: http://review.coreboot.org/9289 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-03-28build system: normalize linker script file namesPatrick Georgi
We have .lb, .lds, and .ld in the tree. Go for .ld everywhere. This is inspired by the commit listed below, but rewritten to match upstream, and split in smaller pieces to keep intent clear. Change-Id: I3126af608afe4937ec4551a78df5a7824e09b04b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org> Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170 Reviewed-on: http://review.coreboot.org/9107 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-01-27CBMEM: Tag chipsets with LATE_CBMEM_INITKyösti Mälkki
In preparation to remove the static CBMEM allocator, tag the chipsets that still do not implement get_top_of_ram() for romstage. LATE_CBMEM_INIT also implies BROKEN_CAR_MIGRATE. Change-Id: Iad359db2e65ac15c54ff6e9635429628e4db6fde Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7850 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-01-14northbridge/via/vx800/lpc.c: Remove unused variablesEdward O'Callaghan
Change-Id: I1f94171173d0b3d672aebeb0dd901dd292028711 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8199 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-08northbridg/via/vx900: Doxygen fixesMartin Roth
- @todo has to be lowercase for doxygen - Fix some parameters that had changed in the code. - The @file entries needed to be more specific. Change-Id: Icdce08735f581609cd25cce41e986c71435368a4 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8154 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-06northbridge: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the northbridge code to use printk() on all non-ROMCC boards. Change-Id: I4a36cd965c58aae65d74ce1e697dc0d0f58f47a1 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7856 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-05northbridge/via/vx800/examples: Remove rotting sourceEdward O'Callaghan
This is just bit-rotting and its likely this will continue to rot by the time someone notices it exits it will be too late (i.e., today). Change-Id: I40ef2cd8e3d563079b086f51dabab0960a0a13b3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8087 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-04remove vx900_int16 doxygen module/groupMartin Roth
This doxygen directive was creating a top level modules section, which had the vx900_int15 code as its only member. I do think that breaking the code into documented sections is a good plan, but in an effort to clean up the output, I'm removing this for now. Change-Id: I3f7e2f704136ebbd1961c5946bac4c2edbd6a371 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8070 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-18Drop VIA Epia-NStefan Reinauer
ROMCC cleanup. Change-Id: Id72e6fcb89165f28cad8bf3a5b632d3fa094b7dd Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7855 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-18Drop VIA Epia-M series of boardsStefan Reinauer
ROMCC cleanups Change-Id: Ic4c9d9eb8c7edc506c8a8e8eeeacf759cbaead74 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7854 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-18Drop VIA Epia mainboardStefan Reinauer
.. and also drop the northbridge and southbridge used by the board. This is one of the last boards to not use ROMCC for romstage. Let's get rid of it. Change-Id: I0a864b2c4ce3eeb7d3e199944eedef0cd71a85e6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7853 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-07vx800/vga.c: Remove extraneous parentheses.Vladimir Serbinenko
Change-Id: Ic81b5f66871ec78c72f2adc5723f22fa94a672e8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7682 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07via/vx900: Plumber registered DIMM to right place.Vladimir Serbinenko
Currently due to enum mistake DDR3 = 0xb was confused with DIMM type and interpreted as LRDIMM, considered unregistered and so every RAM was unregistered. Registered RAM is rarely used, so I suppose the code was never tested with them. For unregistered RAM exactly the same codepath is followed. Change-Id: I02fe8b1fd7be3bd382399ffa0eb513965a2a6d77 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7687 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07vx800: Silence clang warnings.Vladimir Serbinenko
I have no such board to check the real fixes but this board shouldn't block benefits for the rest of the tree. Change-Id: I9e9d4af1b360bcf0099ac2901b08f7fcd7569097 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7681 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-02Replace hlt with halt()Patrick Georgi
There were instances of unneeded arch/hlt.h includes, various hlt() calls that weren't supposed to exit (but might have) and various forms of endless loops around hlt() calls. All these are sorted out now: unnecessary includes are dropped, hlt() is uniformly replaced with halt() (except in assembly, obviously). Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7608 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-04Redundant addr '&' operator on func ptr's in struct initiatorEdward O'Callaghan
Bring code inline to be consistent with the rest of coreboot. See standard - c99std (n1256) 6.3.2.1p4 - to paraphrase, 'expressions that refer to functions get converted to pointers to those functions' Change-Id: I63a7bed5efade37dd7076dbfc9c85d420cf6c92b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7290 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-01northbridge/via: Use DEVICE_NOOP macro over dummy symbolEdward O'Callaghan
Change-Id: Ib9d0fae363c5c1fbed3a63cb8aa86716cf1f9ee1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7289 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2014-10-22cmos: Rename the CMOS related functions.Gabe Black
Most of the code related to the mc146818 is not related to the RTC and is really for managing the CMOS storage. Since we intend to add a generic API for RTC drivers it's inconvenient for those functions to have an rtc_ prefix. This CL renames those functions so they start with cmos_ instead. There are some places where rtc_init was called with a comment that says something about starting the RTC. That wasn't correct before (the RTC is always running), but it looks a little odd now that the function is called cmos_init. This CL also opportunistically cleans up some style problems in this file. Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/197794 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 9a9ad24888b185fb58965457704e326bb508d788) Removed the addition of stdint.h to mc146818rtc.h since types.h is now included. Changed rtc_init to cmos_init for fsp_bd82x6x, fsp_rangeley, fsp_baytrail, ibexpeak, vortex86ex. Change-Id: Id4b9f6bea93e8bd5eaef2cb17f296adb9697114c Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-18via/vt8454c: Migrate to per-device ACPIVladimir Serbinenko
Change-Id: Ia3f6691ae7c33b5e22010e25a1f01996a594196e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6943 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-18via/vx800: Migrate to collaborative ACPIVladimir Serbinenko
Change-Id: I00d0d0e2556d4cd0553a2b3351ace26bf747ff6a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6944 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-08-05northbridge/via/vx800: Fix out-of-bounds read due to off-by-oneEdward O'Callaghan
Change-Id: Ia7fda59b60b2148dd4d246686bd94d2334b23eb5 Found-by: Coverity Scan Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6485 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-29Uniformly spell frequency unit symbol as HzElyes HAOUAS
Change-Id: I1eb8d5bd79322ff3654a6ad66278a57d46a818c1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6384 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-24northbridge/via: Remove a trailing whitespaceElyes HAOUAS
Change-Id: I959f2d42bb3b6cd37a7876ad4dae712bdb5a69da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6315 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-17northbridge,Makefile.inc: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: Id1fcd3d1cd8a156a76e1a9a3ca4c7b4004c2c015 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6289 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-07-11src: Make use of 'CEIL_DIV(a, b)' macro across treeEdward O'Callaghan
The objective here is to tighten coreboot up a bit by not repeating common helpers. This makes the code base more consistent and unified/tight. Change-Id: Ia163eae68b4a84a00ed118125e70308fab1cea0c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6215 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-08northbridge: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I9515778e97cc5ae0e366b888da90a651ae5994fe Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6210 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-19via/vx900: Remove GFXUMA and use of related global variablesKyösti Mälkki
Remove global variables uma_memory_base and uma_memory_size from builds with via/vx900 northbridge, as these variables can be kept within the chipset. Change-Id: I9f8aea4836d81e704eae6a0f2cefc7fd4586b8b8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5721 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-19fix printk typesPatrick Georgi
Some size_ts were considered long int and some compilers are picky about that. Change-Id: I671daa18eb3bfa2a7defc120e77bbb1ef72bd417 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5788 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-13src/drivers/pc80: Remove empty struct keyboardEdward O'Callaghan
This is a empty struct that has propagated through the superio's & ec's but really does nothing. Time to get rid of it before it adds yet more cruft. However, since this touches many superio's at once we do this in stages by first changing the function type to be a pure procedure. Change-Id: Ibc732e676a9d4f0269114acabc92b15771d27ef2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5617 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2013-12-27via: Write »access« without »m« at endPaul Menzel
The comment was copied around so fix all occurrences using the following command. $ git grep -l accessm | xargs sed -i 's/accessm/access/g' Change-Id: I46e117c126c0f851cd5e95cf9e42a77ca5f80996 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/4577 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-23Coding style: punctuation cleanup [1/2].Idwer Vollering
Clean up superfluous line terminators. Change-Id: If837b4f1b3e7702cbb09ba12f53ed788a8f31386 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4562 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-09-21timestamps epia-m850: Cleanup without enabling timestampsKyösti Mälkki
Remove the existing hack, platform needs a fix for EARLY_CBMEM_INIT. Change-Id: I7ce373c9698878d9fa056983e4fb571a68239c52 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3913 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM x86: Unify get_cbmem_toc()Kyösti Mälkki
Remove any chipset-specific implementations and use arch-specific implementation of get_cbmem_table() instead. Change-Id: I338ee2c1bd51f5e517462115170dc926e040159e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3907 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Unify get_top_of_ram()Kyösti Mälkki
Change-Id: Ic40a51638873642f33c74d80ac41cf082b2fb177 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3904 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM northbridges: Remove references to global high_tables_baseKyösti Mälkki
Use the new helper function set_top_of_ram() to remove remaining uses of high_tables_base and _size under northbridge/. Change-Id: I6b0d9615002ed2aff578c5811d7bd43dd2594453 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3561 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-16Correct spelling of shadow, setting and memoryPaul Menzel
Change-Id: Ic7d793754a8b59623b49b7a88c09b5c6b6ef2cf0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3768 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-07-11Set PCI bus operations at buildtime for ramstageKyösti Mälkki
PCI bus operations are static through the ramstage, and should be initialized from the very beginning. For all the replaced instances, there is no MMCONF_SUPPORT nor MMCONF_SUPPORT_DEFAULT selected for the northbridge, so these continue to use PCI IO config access. Change-Id: I658abd4a02aa70ad4c9273568eb5560c6e572fb1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3607 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Rename hardwaremain() to main()Stefan Reinauer
... and drop the wrapper on ARMv7 Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3639 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Fix MMCONF_SUPPORT_DEFAULT for ramstageKyösti Mälkki
Define at one place whether to use IO 0xcf8/0xcfc or MMIO via MMCONF_BASE_ADDRESS for PCI configuration access funtions in ramstage. The implementation of pci_default_config() always returned with pci_cf8_conf1. This means any PCI configuration access that did not target bus 0 used PCI IO config operations, if PCI MMIO config was not explicitly requested. Change-Id: I3b04f570fe88d022cd60dde8bb98e76bd00fe612 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3606 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-02Make setting MAX_PIRQ_LINKs depend on NORTHBRIDGE_VIA_VX900Dave Frodin
The MAX_PIRQ_LINKS is defined in src/Kconfig with a default value of 4. The src/northbridge/via/vx900/Kconfig also defines MAX_PIRQ_LINKS with a default of 8 and it ends up giving us a value of 8 for non-VIA platforms. Change-Id: Iee1938d38a93ab7c35c8cb6fe9656a92cf3fa21e Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3586 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-10VX900: Use MIN/MAX from stdlib.h instead of redefining themAlexandru Gagniuc
Change-Id: I2dd693b300085493baa65bb652df8d6cce80b63b Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3431 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-10VIA VX900: Add minimal ramstage needed to boot linuxAlexandru Gagniuc
This is the minimal code needed to get past ramstage, load SeaBIOS, jump to GRUB2, and boot linux (or load memtest). See individual source files for the status of each individual component. Change-Id: Ib7d5d7593c945f18af2c2fc5e0ae689ba66131a2 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3419 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10VX900: Add DDR3 initializationAlexandru Gagniuc
The VX900 can be connected to either DDR2 or DDR3. On my board, it is DDR3, hence why there is no and will be no DDR2 code from my side. This is the raminit for DDR3 dimms for the VX900. I like the term "raminit" better than "memory training". This is a device, not a dog. What works and what doesn't is documented in the code. It does not make sense to hide that information in a commit message. Change-Id: Ib2ebc10e6d4d22d0a937fe9e895c17ce79153c88 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3417 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10VX900: Add support for early romstageAlexandru Gagniuc
Add support for VX900 early initialization up until, but not including raminit. Add the basic infrastructure, add a romstrap table, and functionality to configure the CPU bus and SMBus. This code is necessary and sufficient to prepare us for raminit. Change-Id: Icc9c41e4927b589f17416836f87a6a5843b24aa7 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3372 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08hardwaremain: drop boot_complete parameterStefan Reinauer
it has been unused since 9 years or so, hence drop it. Change-Id: I0706feb7b3f2ada8ecb92176a94f6a8df53eaaa1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3212 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-28Drop CONFIG_WRITE_HIGH_TABLESStefan Reinauer
It's been on for all boards per default since several years now and the old code path probably doesn't even work anymore. Let's just have one consistent way of doing things. Change-Id: I58da7fe9b89a648d9a7165d37e0e35c88c06ac7e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2547 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-30Rename devices -> deviceStefan Reinauer
to match src/include/device Change-Id: I5d0e5b4361c34881a3b81347aac48738cb5b9af0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1960 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2012-11-28Remove assembly coded log2 functionRonald G. Minnich
As we move to supporting other systems we need to get rid of assembly where we can. The log2 function in src/lib is identical to the assembly one (tested for all 32-bit signed integers :-) and takes about 10 ns to run as opposed to 5ns for the non-portable assembly version. While speed is good, I think we can spare the 15 ns or so we add to boot time by using the C version only. Change-Id: Icafa565eae282c85fa5fc01b3bd1f110cd9aaa91 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1928 Tested-by: build bot (Jenkins)
2012-11-27Get rid of drivers classPatrick Georgi
The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-24x86 realmode: Use x86emu register file + definesPatrick Georgi
By using the (global) register file as defined by x86emu, we can use the same register access for YABEL and realmode interrupt handlers. - the x86 realmode interrupt handlers changed in signature - to access registers, use X86_$REGNAME now (eg. X86_EAX) - x86_exception_handler still uses struct eregs *regs to avoid spilling the x86emu register file stuff everywhere Coccinelle script that handled most of this commit: @ inthandler @ identifier FUNC, regs; @@ int FUNC( -struct eregs *regs +void ) { ... } @ depends on inthandler @ identifier regs; @@ -regs->eax +X86_EAX @ depends on inthandler @ identifier regs; @@ -regs->ebx +X86_EBX @ depends on inthandler @ identifier regs; @@ -regs->ecx +X86_ECX @ depends on inthandler @ identifier regs; @@ -regs->edx +X86_EDX @ depends on inthandler @ identifier regs; @@ -regs->esi +X86_ESI @ depends on inthandler @ identifier regs; @@ -regs->edi +X86_EDI @ depends on inthandler @ identifier regs; @@ -regs->eflags +X86_EFLAGS @ depends on inthandler @ identifier regs; @@ -regs->vector +M.x86.intno Change-Id: I60cc2c36646fe4b7f97457b1e297e3df086daa36 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1891 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-24x86 realmode: Adapt to x86emu/YABEL style return codesPatrick Georgi
realmode int handlers must return the same codes as the YABEL int handlers now: 1 for "interrupt handled", 0 for "not handled" (ie. error). Change-Id: Idc01cf64e2c97150fc4643671a0bc4cca2ae6668 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1890 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-24x86emu: Move realmode handler into own directoryPatrick Georgi
It's really a feature in parallel to YABEL/x86emu. Reflect this in the directory structure. Change-Id: Ie88e4fa6bfef13d23c55b2db3faacbd90f8cc30b Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1889 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-14VIA chipsets: fix compilation without real mode codeStefan Reinauer
The VIA chipsets CX700, VT8623 and VX800 required to be configured with real mode option rom code enabled. This patch fixes the issue and drops some unneeded header files. Change-Id: I0d8a3f8f99c2eacec7666f08f85b99f09c06af84 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1833 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-10-08hpet: common ACPI generationPatrick Georgi
HPET's min ticks (minimum time between events to avoid losing interrupts) is chipset specific, so move it to Kconfig. Via also has a special base address, so move it as well. Apart from these (and the base address was already #defined), the table is very uniform. Change-Id: I848a2e2b0b16021c7ee5ba99097fa6a5886c3286 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1562 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>