| Age | Commit message (Collapse) | Author |
|---|
|
Displaying the whole receive enable procedure is very verbose should
only be done if CONFIG_DEBUG_RAM_SETUP is selected.
Change-Id: Ib568621e6d044624c1c0aeb6fb08945f561395c7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
During raminit a lot of procedures need to be done for each bytelane.
Change-Id: Ib9a30ffabaf5c845e962e3e79cf4a20faa1d9857
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This replaces magic values by macros and adds some comments to improve
readability.
Adds a convenient function to fetch the test address of a rank.
Also fixes the temporary memory map by changing a write to MCHBAR
0x100 to 0x110, since this is what vendor does. (No difference
observed thus far)
TESTED on DG43GT
Change-Id: I58923e4a8a756f4ae65f759e7d46e03fad39fab7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
This patch pushes these large default delay tables to a different file
to reduce cluttering up the actual raminit source. While doing so it
also uses more but smaller arrays and also adds the respective default
delays for DDR3 which are not yet used in this patch.
This patch add a function to set the read DQS delays instead of just
programming magic values. (This will prove useful for DQS read
training)
To prepare for adding trainings on the delay values it stores these
default delays in the sysinfo struct to program those. Later when
trainings are implemented those trained values will be used instead of
these safe default values, via using the cached sysinfo in 'mrc'
cache.
TESTED on DG43GT (still works fine)
Change-Id: I0e3676e06586ea84fc0729469946dbc9a8225934
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Stores information obtained from decoding dimms and receive enable
results for future use.
Depreciates using rtc nvram to store receive enable settings.
A notable change is that receive enable results are always reused, not
just on a resume from S3.
This requires cbmem to be initialized a bit earlier, right after the
raminit finished to be able to add the sysinfo struct to cbmem which
gets cached to the SPI flash in ramstage.
TESTED on Intel DG43GT with W25Q128.V. With 4 ddr2 dimms time in
raminit goes from 133,857ms (using i2c block read to fetch SPD) to
21,071ms for cached results.
Change-Id: I042dc5c52615d40781d9ef7ecd657ad0bf3ed08f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This information is not spew but useful to users.
Change-Id: I195c6913b7f0b96680b433ff3251aebb7e0f70f3
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/25675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I4251071fc8d41a923b4e12de214670764097d47c
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/25674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Tested with a pair of GSkill F3-1866C9-8GSR.
This makes sure in particular that we honor the CMD rate requested by
the XMP profile. This memory kit needs a CMD rate of 2 to be stable at
DDR3-1600 and up, even though it passes training at 1.
Also respect requested CWL to match vendor firmware and for a potential
increase in performance. The tested kit requests a tighter value than
the per-frequency table provides and has shown to be stable using that
setting.
Change-Id: I634bed764d76345c27f02a2fae5abb2d81b38fd9
Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com>
Reviewed-on: https://review.coreboot.org/25664
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Required for other ACPI generators, like the one used for _ROM.
* Add ACPI code for PEG10/PEG11/PEG12/PEG60 and include it on all platforms.
* Add PCIe driver for PEG. The driver returns ACPI names for ssdt generators.
Needs test on real hardware.
Change-Id: I96835c43522580c95fd4f250c56bf9438e993bc1
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22337
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 5fbe788bae15f0d24d56011e8eb8b48c107b7b05.
This commit was submitted without its parent being submitted,
resulting in coreboot not building.
Change-Id: I87497093ccf6909b88e3a40d5f472afeb7f2c552
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/25616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch adds a few southbridge calls needed for parallel MP init.
Moves the smm_relocate() function to smm/gen1/smi.h, since that is
where this function is defined now.
Tested on Thinkpad X220, shaves of ~30ms on a 2 core, 4 threads CPU.
Change-Id: Iacd7bfedfccbc09057e1b7ca3bd03d44a888871d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23432
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TSEG is not accessible in ring 0 after it is locked in ramstage, in
contrast with cbmem which remains accessible. Assuming SMM does not
touch the cache this is a good region to cache stages.
The code is mostly copied from src/cpu/intel/haswell.
TESTED on Thinkpad X220: on a cold boot the stage cache gets created
and on S3 the cached ramstage gets properly used.
Change-Id: Ifd8f939416b1712f6e5c74f544a5828745f8c2f2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adapt implementation from skylake to prepare for removal of HIGH_MEMORY_SAVE
and moving on to RELOCATABLE_RAMSTAGE. With the change, CBMEM and SMM regions
are set to WRBACK with MTRRs and romstage ram stack is moved to CBMEM.
Change-Id: I84f6fa6f37a7348b2d4ad9f08a18bebe4b1e34e2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This is hopefully more readable.
TEST=Build lenovo/x200 with and without this patch (using make
BUILD_TIMELESS=1), compare build/coreboot.rom, notice no differences.
Change-Id: I079d5353633a3d58ce0e5e616f3fad687a064d65
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23709
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on Thinkpad X200.
Change-Id: I9db7a71608aaec956a7b22649498b97d58f35265
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23418
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We use the usual static addresses 0xfed90000/0xfed91000 for the GFX
IOMMU and the general IOMMU respectively. These addresses have to be
configured in MCHBAR registers and reserved from the OS.
GFXVTBAR/VTVC0BAR policy registers set to be consistent with
proprietary vendor firmwares on hardware of same platform
(2 different vendor firmwares compared, found to be identical).
Change-Id: Ib8f2fed9ae08491779e76f7d1ddc1bd3eed45ac7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/24983
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If the SoC is VT-d capable, write an ACPI DMAR table. The entry for the
GFXVTBAR is only generated if the IGD is enabled.
Change-Id: Ib354337d47b27d18c3b79b5de3b4fa100b59c8fc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/24984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
|
|
This is useful information, when debugging problems related to graphics.
Change-Id: Iacb0ae5f012207192379fd07e91f4687ec32cdfb
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/23807
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Many generations of Intel hardware have identical code concerning the
RCBA.
Change-Id: I33ec6801b115c0d64de1d2a0dc5d439186f3580a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
In order for ddr2.h and ddr3.h to be included in the same file it
cannot have conflicting definitions, therefore rename a few things and
move some things to a common header.
Change-Id: I6056148872076048e055f1d20a60ac31afd7cde6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
The result is shorter and (IMHO) more readable code.
Change-Id: Ic51c05d7aa791250d775bd7a640213065d4caba0
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
'Optimizing' MMCONF_BASE_ADDRESS for the native codepath prevents the
use of fallback/normal with both the native raminit and the mrc.bin.
Using the same MMCONF_BASE_ADDRESS as the mrc.bin codepath means that
128MB less is available to devices using the native raminit. Most
devices reserve 2048M for non memory resources below 4G, which in most
cases is more than adequate. Devices with only 1024M (and that don't
already use the mrc.bin) are:
* lenovo/x220
* lenovo/x230
* lenovo/x131e
* lenovo/x1_carbon_gen1
Those could fail to allocate PCI resources, but on at least x220 with
a somewhat default configuration (USB3 expresscard, Wireless PCIe
card) it still boots fine, so one should not expect many problems from
this change.
Change-Id: I1d0648fe36c88bd9279ac19e5c710055327599fd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This driver uses an fmap region for the MRC cache instead of a CBFS
file which makes it easier to manage if one wants to write protect
it.
Change-Id: Iaa6b9f87c752088d70882fd05cb792e61a091391
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I6dfef118dc2fecf2a8f2f3401c779a3becfb71a9
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The code has been moved into drivers folder.
Change-Id: I122affffd5108052ed7a95b34d0d66a6d3279d41
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/23487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This uses the functions in include/mrc_cache.h instead of
northbidge/intel/common/mrc_cache.h
Tested working on Lenovo Thinkpad x220, mrc_cache region gets written
and S3 resume still works fine.
Change-Id: I46002c0b19a55d855286eb8b0ca934ef7ca7fe09
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Most affected boards set the function disabled (FD) register to an
arbitrary state dumped from systems running the vendor BIOS. This
makes it impossible to enable the devices in devicetree and a pretty
big mess of course because nobody cared to keep the register in sync
with the devicetree.
To get completely rid of most of the writes to FD, move setting of
PCH_DISABLE_ALWAYS into the southbridge code where it belongs.
Change-Id: Ia2a507cbcdf218d09738e2e16f0d3ad1dcf57b8b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/23255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hal Martin <hal.martin+coreboot@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Bill XIE <persmule@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Macro renamed to be in accordance with the name used in the datasheet.
Change-Id: I5671c39608769b2c5ea2fb17809430f56e5f0b71
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
All boards and chips that are still using LATE_CBMEM_INIT are being
removed as previously discussed.
If these boards and chips are updated to not use LATE_CBMEM_INIT, they
can be restored to the active codebase from the 4.7 branch.
chips:
northbridge/intel/i82810
Mainboards:
src/mainboard/asus/mew-am
src/mainboard/asus/mew-vm
src/mainboard/ecs/p6iwp-fe
src/mainboard/hp/e_vectra_p2706t
src/mainboard/intel/d810e2cb
src/mainboard/mitac/6513wu
src/mainboard/msi/ms6178
src/mainboard/nec/powermate2000
Change-Id: Ib273316c59f499e6cd3a0e4c4dc4c2cce94ff291
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/23300
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Rename tlcl* to tss* as tpm software stack layer.
* Fix inconsistent naming.
Change-Id: I206dd6a32dbd303a6d4d987e424407ebf5c518fa
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
* Move code from src/lib and src/include into src/security/tpm
* Split TPM TSS 1.2 and 2.0
* Fix header includes
* Add a new directory structure with kconfig and makefile includes
Change-Id: Id15a9aa6bd367560318dfcfd450bf5626ea0ec2b
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
All boards and chips that are still using LATE_CBMEM_INIT are being
removed as previously discussed.
If these boards and chips are updated to not use LATE_CBMEM_INIT, they
can be restored to the active codebase from the 4.7 branch.
chips:
cpu/intel/socket_mFCBGA479
northbridge/intel/i82830
Mainboards:
mainboard/rca/rm4100
mainboard/thomson/ip1000
Change-Id: I9574179516c30bb0d6a29741254293c2cc6f12e9
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/22032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
All boards and chips that are still using LATE_CBMEM_INIT are being
removed as previously discussed.
If these boards and chips are updated to not use LATE_CBMEM_INIT, they
can be restored to the active codebase from the 4.7 branch.
chips:
northbridge/intel/i3100
southbridge/intel/i3100
superio/intel/i3100
cpu/intel/socket_mPGA479M
Mainboards:
mainboard/intel/truxton
mainboard/intel/mtarvon
mainboard/intel/truxton
Change-Id: Ic2bbdc8ceb3ba0359c120cf4286b0c5b7dc653bb
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/22031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
All boards and chips that are still using LATE_CBMEM_INIT are being
removed as previously discussed.
If these boards and chips are updated to not use LATE_CBMEM_INIT, they
can be restored to the active codebase from the 4.7 branch.
chips:
northbridge/intel/i5000
Mainboards:
mainboard/supermicro/x7db8
mainboard/asus/dsbf
Change-Id: I6614c0033b4439d196f26819998d3f85e6d11c00
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/22030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
All boards and chips that are still using LATE_CBMEM_INIT are being
removed as previously discussed.
If these boards and chips are updated to not use LATE_CBMEM_INIT, they
can be restored to the active codebase from the 4.7 branch.
chips:
northbridge/intel/i855
Mainboards:
mainboard/lanner/em8510
Change-Id: Ic9ba0ba7e2b6e602a5749cc531dd705c49e3f08d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/22029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Especially on ICH7 failing to do so results in i2c block read being
unusable. On ICH10 this problem doesn't manifest itself that much.
This moves disabling the watchdog reboot to the northbridge code like
i945 (even though it technically is southbridge stuff).
TESTED on Intel DG41WV: hacking on raminit is much nicer since no
need to do a hard power down for +4s are needed to clear the timeouts.
Change-Id: Icfd3789312704f61000a417f23a121d02d2e7fbe
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
gma.c of Nehalem was copied from Sandy/Ivy Bridge, so fix it there too.
Tested on lenovo/x230. Since both the bit that was masked wrongly and the
one that wasn't masked, but sould have been, are 0, the behaviour on
lenovo/x230 doesn't change.
Change-Id: I5f51c4929df83f948fcb7dc06e07ac3cc4ccf4f2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/22596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
These were forgotten when updating the caller and resulted in build
failures for every but the NGI path.
Change-Id: I2490a3b4dca6c248eb37f43aa676ae619afdbfc7
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/22930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This is mostly written from scratch and uses common spd ddr2 decode
functions.
This improves the following:
* This fixes incorrect CAS/Freq detection on DDR2;
* Fixes tRFC computation; tRFC == 78 is a valid timing which is
excluded and 0 ends up being used; (TESTED)
* Timings selection does not use loops;
* Removes ddr3 spd decode and is re-added in follow-up patches using
common ddr3 spd functions;
* Raminit would bail out if a dimm was unsupported, now in some cases it
just marks the dimm slot as empty;
* It dramatically reduces stack usage since it does not allocate 4
times 256 bytes to store full SPDs, amongs other unused things that
were stored in sysinfo;
* Reports when no dimms are present;
* Uses i2c block read to read SPD which is about 5 times faster than
bytewise read, with a fallback to smbus mode in case of failure,
which does seem to happen when the system is forcefully powered
off.
Change-Id: I760eeaa3bd4f2bc25a517ddb1b9533c971454071
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This fixes some bitwise logic errors that caused the coarse offset not
to be programmed.
This fixes a regression introduced by 6d7a8c
"nb/intel/x4x/raminit: Rework receive enable calibration"
where the coarse offset doesn't get programmed anymore.
TESTED on Foxconn g41s-k on a DIMM where the final DQS receive enable
delays are close but above and below the edge of a coarse delay setting.
Change-Id: I41869815f782a2ea1178bdea006e3a7587441323
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Corrects MBSC/MBFS programming when initializing DRAM on boards with both
3 and 4 DIMM slots.
Reformats comments to current coreboot standards.
Drops some romcc "optimizations" no longer necessary.
Boot tested on asus/p2b-ls, where it fixes a memory related hang after
SeaBIOS resets the board with nothing to boot from.
Change-Id: Ib8c21489338643e13f69bd58008d14733796d4d0
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/22687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I22241427d1405de2e2eb2b3cfb029f3ce2c8dace
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/22585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I9f96561120d0feb44c5edd9e7241bc3456b31e5f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/22221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This partially reverts 2510e2aa "northbridge/intel/i3100: Unify UDELAY
selection" which moved all supported boards from UDELAY_TSC to
UDELAY_IO. Since UDELAY_IO is the default this changes nothing.
Change-Id: I42856e5929a7ba047987414a25cd0ae9712434a7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22173
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Simplifies our C interface function gma_gfxinit(), due to the following
changes:
* *libgfxinit* knows about the underlying PCI device now and can
probe MMIO addresses by itself.
* The framebuffer mapping is now completely handled inside the
library where we validate that we neither overflow
- the stolen memory,
- the GTT address space, the GTT itself nor
- the aperture window (i.e. resource2 of the PCI device)
that we use to access the framebuffer.
Other changes:
* Fixes and a quirk for DP training.
* Fix for DP-VGA adapters that report an analog display in EDID.
* Fixes for Skylake support with coreboot.
* DDI Buffer drive-strength configuration for Haswell, Broadwell and
Skylake.
* `gfx_test` can now be run from X windows (with glitches).
* Compatibility with GCC 7 and SPARK GPL 2017.
TEST=Booted lenovo/t420 and verified that everything works as usual.
Change-Id: I001ba973d864811503410579fd7ad55ab8612759
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The current header `i915.h` is too invasive to be used everywhere where
we want to use *libgfxinit*.
Change-Id: Iba57256d536e301e598d98182448d2daa1bf9a89
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Port the ACPI opregion implementation that resides in
drivers/intel/gma to older platforms. It allows to include a vbt.bin and
allows GNU/Linux to load the opregion as ASLB is being set.
Windows' Intel will likely ignore it as it relies on legacy VBIOS
to be loaded at 0xc0000.
Change-Id: Ifc9fc52d84dcbb0da577e61467ece8a48752f44b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This commit just moves the vboot sources into
the security directory and fixes kconfig/makefile paths.
Fix vboot2 headers
Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
XMP profiles can have a restriction on max supported DIMMs per channel,
but many configurations work with more DIMMs.
This is relevant on mainboards with 2 DIMM slots per channel (usually 4
in total). Populating both slots with DIMMs that support XMP profiles only
with 1 DIMM per channel turns off said XMP profiles.
TEST=On a system with two DIMM slots per channel populate both slots on
one channel and ensure that DIMMs run with XMP profiles enabled.
Change-Id: I1f22d981afcef0ee73785823b0a943cf3d3564e3
Signed-off-by: Vagiz Trakhanov <rakkin@autistici.org>
Reviewed-on: https://review.coreboot.org/21841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
DRAM Controller is always 00.0. No need to check its PCI ID.
Change-Id: I9c5f3e5658905e464491579f8da01aa6a03bd3b7
Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org>
Reviewed-on: https://review.coreboot.org/21754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I1899dbe9498a0cc83b65b4bc1c6c0a555637fd05
Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org>
Reviewed-on: https://review.coreboot.org/21753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Port the ACPI opregion implementation that resides in
drivers/intel/gma to older platforms.
It allows to include a vbt.bin and allows GNU/Linux to load the
opregion as ASLS is being set.
Windows' Intel will likely ignore it as it relies on legacy VBIOS
to be loaded at 0xc0000.
Tested successfully on DG43GT (x4x) with vbt.bin,
with X200 (gm45) with vendor option rom and
D945GCLF (i945) with fake vbt.
Change-Id: I1896411155592b343e48cbd116e2f70fb0dbfafa
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The scramble seed intended for CH1 were written to the regs of CH0.
Write the scramble seed for CH1 at the correct offset.
TESTED on Lenovo T430, HP 2760P, Asrock B75PRO3-M.
Change-Id: I3778947e96b3298c38e6d5b74988e617e1ffea7b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Iru Cai <mytbk920423@gmail.com>
|
|
This code path was only triggered in one corner case: GFX UMA set to
48MiB. It created a hole below UMA to save MTRRs. But, this hole was
never accounted for when calculating cbmem_top(). Instead of trying
to fix it, remove it, it's not worth the trouble.
TEST=Booted lenovo/x200 with all available CMOS gfx_uma_size settings.
Change-Id: I3f4ceec4224d86113be9bfa3ce4759bed584640d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove no-op statements and code-rephrasing comments, apply some cosmetic
changes to improve readability.
Change-Id: I124a6bc338c2589fab66ca91bf53139b4413d10b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add debug messages for SPD probing.
Change-Id: I722102b7981781b88cdc4877f698294eb719ff32
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
SPD decoding problems are no longer a good method for detecting if i2c
byte read failed, since the return value of i2c_block_read is checked.
Change-Id: I230aa22964c452cf28a9370c927b82c57e39cc62
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Needed for coreboot spi driver.
Change-Id: I01059c8cbdc6a002dfd75b6da3a629811b137702
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: If6cf47e4a87cf008d51f65fd1c1c79392c4b2786
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/21619
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This simplifies computing dram timings a lot.
This removes computation of rank size based on columns, rows,
banks,... and uses the information in SPD byte 31. The result of this
is that dimms with multiple asymmetric ranks are not supported
anymore. These however are very rare and most likely never tested on
this platform.
This also uses i2c block read instead of byte read to speed up the
raminit. The result is less time is being spend reading SPDs.
It still keeps smbus read byte as a backup if i2c block read were to
fail.
Change-Id: I97c93939d11807752797785dd88c70b43a236ee3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I270d17a2eff2c6664bf936425a6ed344be3feabe
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/21524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
There's no reason to mutate the struct device when determining
the ACPI name for a device. Adjust the function pointer
signature and the respective implementations to use const
struct device.
Change-Id: If5e1f4de36a53646616581b01f47c4e86822c42e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use macro instead of numbers
Change-Id: Ife1aff0a5cf311881b3a11533b71a74c518a633f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/21472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Implement cbmem_top() required for cbmem support in romstage.
Boot tested on asus/p2b-ls. Boards to move to this setup in
followup patches.
Change-Id: I432f145a5343c1bb5f2b0de3b6b88f57124d1bd9
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/20977
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Even with the watchdog disabled, these bits influence other hardware
blocks (e.g. SECOND_TO_STS stops SMBus block transfers, possibly yet
before they started).
Change-Id: If9f93fcc96827bb192148a80b4476796c9358a7a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Inspired by gm45 code, which sets this value the same way.
Some values for tRD on 800 and 1067MHz FSB were set wrong because the
CAS/Freq selection was wrong. CAS was often selected to low and when
fixing CAS this results in tRD being too high, due to an incorrect
lookup table which caused instability.
PASSED memtest86+ during 10h+ on 1067MHZ fsb with 667MHz ddr2, CAS 5
on GA-945GCM-S2L.
Change-Id: I8002daf25b7603131b78b01075f43fd23747dd94
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We set the SPI lockdown in BS_POST_DEVICE (dev_finalize()) on many plat-
forms now. The SPI controller is initialized at start of BS_DEV_INIT
(dev_initialize()).
The SPI lockdown usually shouldn't be a problem but the SPI driver imple-
mentation lacks full support for the locked interface. Also, some options
exist to lock all flash regions read-only until the next reboot.
Change-Id: Ifda826ae2bb28adcce8dda8e2bb16dc38fe0fe9e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicola Corna <nicola@corna.info>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Bill XIE <persmule@gmail.com>
|
|
Without this remapping code enabled, the system fails to boot properly
if the amount of ram inserted is larger than 4G minus the mmio
space (hardcoded to 1G here).
Change-Id: I02e7ceed0cd9db7eb7182481b6989f80cef31ee5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Fix dump_pci_device() broken by commit 65b72ab5 (Drop print_ implementation
from non-romcc boards) in 2015 (!) where only one in 16 bytes were being
dumped.
Also remove the #if made redundant by commit aef8542 (Compile debug.c
only if CONFIG_DEBUG_RAM_SETUP) as this whole file is only compiled in
that case.
Also clean up headers that were included twice.
Change-Id: I60e272b29417039feb15540e49d7300f86e5ed21
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/21203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Some of these will move to EARLY_CBMEM_INIT.
Change-Id: Ia969e30ad7097860180bd047eaf81859a42a747c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Keith Hui <buurin@gmail.com>
|
|
This problem was introduced in:
12a4e98cea nb/intel/pineview/raminit: Refactor timings selection
Change-Id: Iace3dabb8546d7a721ef13526ba02522dc712fdd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
A small typo in the dll setting code prevented this combination from
booting.
TESTED on ga-g41m-es2l with 800MHz FSB CPU and 667MHz ddr2
Change-Id: Ib013471773c20336ba0902b7f328bfb6ef970747
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Moves receive enable calibration to a separate file to lighten
raminit.c a bit.
Receive enable calibration is quite similar to gm45 so it reuses some
of its function names.
The functional changes are:
* the minimum coarse is now reset for each channel;
* on the second fine search for DQS high, TAP overflow is handled by
increasing medium;
* start coarse at CAS + 1 instead of CAS - 1. Other Intel northbridges
do the same and the results are more in line with register dumps
from vendor bios.
These might improve stability.
TESTED on ga-g41m-es2l
Change-Id: I0c970455e609d3ce96a262cbf110336a2079da4d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
... is enabled. Otherwise we are compiling an effectively
empty file.
Change-Id: I4e3d982066d1fa66a3da5f37e278ec7fd5bb1ea8
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/21023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
The S3 resume path is broken on current Linux (4.11.3) and maybe
on older kernel, too.
Don't run the native graphics init when on S3 resume to fix it.
Tested on Lenovo T430.
Change-Id: Ifad145c86c2e8f019c507f97c889b70b7aa49882
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This allows the use of the native VGA init on boards featuring DVI-I
ports. Digital output is not supported.
Change-Id: I11a4dd68746e06c7e27ecf3e765bdd0d8cf40515
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Migrate opregion code from northbridge/intel/common to
drivers/intel/gma in preparation for consolidation with
soc/intel/common opregion code. Rename init_igd_opregion()
for clarity and disambiguation with other implementations.
Change-Id: I2d0bae98f04dbe7e896ca34e15f24d29b6aa2ed6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Add a new Kconfig option to ignore memory fuses that limit the
maximum DRAM frequency to be used. The option is disabled by
default and should only enabled by experienced users as it
might decrease system stability or prevent a successful RAM
training.
Remove conflicting devicetree settings.
Change-Id: I35dd78a02bcaafce8ba522d253c795d7835bacae
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nicola Corna <nicola@corna.info>
|
|
Change-Id: I885b6bd9f5be6b4e3696a530016123a3e81c4b10
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
All Intel southbridges implement the same SMBus functions.
This patch replaces all these similar and mostly identical
implementations with a common file.
This also makes i2c block read available to all those southbridges.
If the northbridge has to read a lot of SPD bytes sequentially, using
this function can reduce the time being spent to read SPD five-fold.
Change-Id: I93bb186e04e8c32dff04fc1abe4b5ecbc4c9c962
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Sync map_oprom_vendev() and autoport with the list of PCI ids in the
`gma.c` driver, remove one obsolete Kconfig default override.
Change-Id: I12f24f415b695c516fbb947114e09c873af2e439
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
All affected boards did the same USE_NATIVE_RAMINIT distinction or
actually selected USE_NATIVE_RAMINIT. Also update autoport.
Change-Id: I924c43cec1e36e84db40e4b8e1dd0e05cad2b978
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20813
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
The newline lint check just went in, and immediately broke the build
due to a commit that went in earlier today.
This fixes the build.
Change-Id: Ic4ba8ce0c8085861bc6c654afdee3fea9f4621fc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There are 4 routines used in RAM init that most if not all
i440bx mainboards call in the same order. Implements a single
RAM init routine for them to allow for future consolidation.
Boards to be changed to use this one routine in a future change.
Change-Id: Ib553b07b117de12b7982586bce0f9355f55013a0
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/20676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This move makes the NB macro more widely available,
in preparation for implementing get_top_of_ram().
Change-Id: Icd8e82cfdfdccb662b2139d0e5d1d5af72cbae7f
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/20675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This does the following:
* Clarify that settings are set to the same value for each rank;
* Allows to program coarse
* Fix some style issues like white spaces between arithmetic
operators.
Change-Id: I3a9e28cfec915a0bb15789c23bea259f621b5096
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This does not use loops to compute timings but uses DIV_ROUND_UP.
Another thing affected by this patch are minimum timings. Presumably
those only need to be guarded against on DDR3. With this change
timings are set up like vendor (with tWTR below previous minimum)
TESTED on Intel D510MO
Change-Id: Ia374f26e5bbb8b90d90c24ae6c20412ba53bd7b6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic9226098dafa2465aa5fccc72c442de2b94e44c7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Also unify __attribute__ ((..)) to __attribute__((..)) and
handle ((__packed__)) like ((packed))
Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use new GMA driver method to set ASLS on S3 resume, too.
Move gma_enable_swsci to init method as it should always be run.
Change-Id: Ic7132cd1848a75043d10f32ac5d0e6b45d2e0fe4
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use new GMA driver method to set ASLS on S3 resume, too.
Move gma_enable_swsci to init method as it should always be run.
Change-Id: I1944fcca91ee1a0ad8df5c8b6f402e907de5e78f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use new GMA driver method to set ASLS on S3 resume, too.
Move gma_enable_swsci to init method as it should always be run.
Change-Id: I772d680774890c32ca6dc9b1e2143b3ab3bf6513
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use new GMA driver method to set ASLS on S3 resume, too.
Move gma_enable_swsci to init method as it should always be run.
Change-Id: Ifc921d7aa2d5b771fc4eaf3ec776c3a13f5496eb
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add and use new interface to set and get GNVS' ASLB register.
To be used by Intel's gma driver to set ASLB at ACPI table
creation and to get ASLB on S3 resume.
Change-Id: If30c6b2270069783b0892774802f47406404da5f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use new GMA driver method to set ASLS.
Change-Id: I872ff86a778497df76ad7f9b1b6910c4e7c5941f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix undefined behavior found by clang's -Wshift-sign-overflow, grep,
and source inspection. Left shifting an int where the right operand is
>= the width of the type is undefined. Add UL suffix since it's safe
for unsigned types.
Change-Id: Id1ed2252ce3ed052730dd10b24c453c34c2ab4ff
Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com>
Reviewed-on: https://review.coreboot.org/20465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
DIMMB's DDR width is in bit 20, not bit 19.
Change-Id: I48866d9243c2a576a02519724429801ae47c5644
Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com>
Reviewed-on: https://review.coreboot.org/20445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Fix reports found by undefined behavior sanitizer. Left shifting an int
where the right operand is >= the width of the type is undefined. Add
UL suffix since it's safe for unsigned types.
Change-Id: If2d34e4f05494c17bf9b9dec113b8f6863214e56
Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com>
Reviewed-on: https://review.coreboot.org/20447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
DISPPLANE_BGRX888 defined in drivers/intel/gma/i915_reg.h
included in i915.h file
Change-Id: I4e9414f39a29e4eac7e325672ce6520a5654d3bc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/20409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ic01bbae9acaabaade777db52825aa80d25fc5961
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/20410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
