aboutsummaryrefslogtreecommitdiff
path: root/src/northbridge/intel
AgeCommit message (Collapse)Author
2015-03-13northbridge/intel/nehalem: don't set FERR_CAPABILITY on BSPAlexander Couzens
This capability means: FERR messages are sent out on system detected an unmasked floating point x87 FPU error. Even though this capability is supported on nehalem it doesn't make sense to set it in early stage. This MSR has a core scope which results in an unsync MSR because it's not set on other cores than the BSP. Found-by: BITS Tested-on: lenovo thinkpad x201t Change-Id: Ief3c04f57ac69e7289fbd37dbc3fd239f9098155 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/8659 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-10ACPI: Get S3 resume state from romstage_handoffKyösti Mälkki
There is nothing platform specific in retrieving S3 resume state from romstage_handoff structure. Boards without EARLY_CBMEM_INIT update acpi_slp_type from ACPI power-management block or scratchpad registers. Change-Id: Ifc3755f891a0810473b3216c1fec8e45908fc1ab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8188 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-03-01devicetree: Drop redundant scan_bus() opsKyösti Mälkki
Change-Id: If96e0843f507b9f1db9977b5d0c47f5ed1c59999 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8533 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-19sandybridge: Try lower frequency if PLL didn't lock.Vladimir Serbinenko
Change-Id: I2c2d586fc572b78b5019f8ef2714959799a8d2a9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/8480 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-17sandybridge/raminit: Get max mem clock from devicetreeAlexandru Gagniuc
Note that the limit is not set in the devicetree.cb which use native sandybridge raminit, as it is not needed. When that isn't set, it's automatically set to zero, and when we find that, we automatically return the default limit. Thus behavior isn't changed for any board. Change-Id: I447399eea71355612b654710a56f3a0077c2f7f9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8476 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-17sandybridge/raminit: Do not die() if timC calibration failsAlexandru Gagniuc
We can successfully bring up systems if timC calibration fails, as has been demonstrated with google/butterfly. As a result, do not die(), but simply print a message and continue in the hope that we may be able to boot. Change-Id: I49ec80324f63b2d45ae8f61c5c26454acb9c232f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8475 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-16acpi: Generate valid ACPI processor objectsTimothy Pearson
The existing code generated invalid ACPI processor objects if the core number was greater than 9. The first invalid object instance was autocorrected by Linux, but subsequent instances conflicted with each other, leading to a failure to boot if more than 10 CPU cores were installed. The modified code will function with up to 99 cores. Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8422 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-02-13Fix source code permissionsStefan Reinauer
Two source files were accidently marked executable. Switch them back to mode 644 (rw-r---r--) Change-Id: Ic96f6e5e9a05cbffb65cdfb627023d04d3866dc9 Signed-off-by: Stefan Reinauer <stepan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8426 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-02-06intel/fsp_rangeley: Indent '#define' consistentlyYork Yang
The indentations of #define are not consistent in chip.h. Update to make all #define indentations being aligned and put them after the variable declaration. Change-Id: I37550acac18bac3efddb580ef6b956be0e2b357a Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/8333 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins)
2015-02-06FSP & CBMEM: Fix broken cbmem CAR transition.Martin Roth
1) Save the pointer to the FSP HOB list to low memory at address 0x614. This is the same location as CBMEM_RESUME_BACKUP - the two aren't used in the same platform, so overlapping should be OK. I didn't see any documentation that actually said that this location was free to use, and didn't need to be restored after use in S3 resume, but it looks like the DOS boot vector gets loaded juat above this location, so it SHOULD be ok. The alternative is to copy the memory out and store it in cbmem until we're ready to restore it. 2) When a request for the pointer to a CAR variable comes in, pass back the location inside the FSP hob structure. 3) Skip the memcopy of the CAR Data. The CAR variables do not get transitioned back into cbmem, but used out of the HOB structure. 4) Remove the BROKEN_CAR_MIGRATE Kconfig option from the FSP platform. Change-Id: Iaf566dce1b41a3bcb17e4134877f68262b5e113f Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8196 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31intel/rangeley: Update UPD_DATA_REGION to support POST-GOLD 2 FSPYork Yang
Rangeley POST-GOLD 2 FSP added PCIe ports de-emphasis configuration by UPD input. Update UPD_DATA_REGION structure for matching up this FSP change. PcdCustomerRevision is a debugging aid that will be output to debug message in FSP. When needed, it can be customized by BCT tool for tracking BCT configurations. Change-Id: I6d4138c9d8bbb9c89f24c77f976dbc760d626a9b Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/8107 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-01-27CBMEM: Always use DYNAMIC_CBMEMKyösti Mälkki
Drop the implementation of statically allocated high memory region for CBMEM. There is no longer the need to explicitly select DYNAMIC_CBMEM, it is the only remaining choice. Change-Id: Iadf6f27a134e05daa1038646d0b4e0b8f9f0587a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7851 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Do not use get_top_of_ram() with DYNAMIC_CBMEMKyösti Mälkki
The name was always obscure and confusing. Instead define cbmem_top() directly in the chipset code for x86 like on ARMs. TODO: Check TSEG alignment, it used for MTRR programming. Change-Id: Ibbe5f05ab9c7d87d09caa673766cd17d192cd045 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7888 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Tag chipsets with LATE_CBMEM_INITKyösti Mälkki
In preparation to remove the static CBMEM allocator, tag the chipsets that still do not implement get_top_of_ram() for romstage. LATE_CBMEM_INIT also implies BROKEN_CAR_MIGRATE. Change-Id: Iad359db2e65ac15c54ff6e9635429628e4db6fde Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7850 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-01-27intel: Drop romstage handoff via scratchpadKyösti Mälkki
If HAVE_ACPI_RESUME ever gets implemented, use CBMEM handoff instead. Change-Id: I77463988fa5324c729579902f4796be4da15d551 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8182 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-10haswell: Fix MRC cache to use CBFSKyösti Mälkki
Place the mrc.cache file at top of CBFS. There is no real requirement for it to have a fixed location though. Change-Id: Ibebe848a573b41788c9d84388be8ced68957f367 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7962 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-09northbridge/intel/nehalem/raminit.c: Remove redundant functionEdward O'Callaghan
Remove 'read_mchbar8_bypass()' as 'read_mchbar8()' does the same thing and 'read_mchbar8_bypass()' is unused. Change-Id: I0dc2325e6205c38b63e5200c408ece65e4f938dc Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8166 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-08northbridge/amd: Doxygen fixesMartin Roth
- Add missing parameter names in several files - remove parameter types in several files - remove lines from doxygen documentation. These should be outside the doxygen comments. - Some of the comments shouldn't have been doxygen style. Turn these into regular non-doxygen comments. Change-Id: Ieccfe237385efee007b48308d58eb0a6a12f5bfa Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8153 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-06northbridge: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the northbridge code to use printk() on all non-ROMCC boards. Change-Id: I4a36cd965c58aae65d74ce1e697dc0d0f58f47a1 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7856 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06Revert "Re-factor 'to_flash_offset()' into 'spi_flash.h'"Kyösti Mälkki
This reverts commit 9270553fff23462fcb298f154296319bf3639d15. Change-Id: I195f721ce7a18aac6c1aa6f4e0f9284455d531b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8138 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-06Re-factor 'to_flash_offset()' into 'spi_flash.h'Edward O'Callaghan
Re-factor to_flash_offset() into 'spi_flash.h' header. Motivated by Clang complaining that the function 'to_flash_offset' is unused. Change-Id: Ic75fd2fb4edc5e434c199ebd10c7384d197e0c63 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7519 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-06northbridge/intel: Do not define include guard as 1Edward O'Callaghan
As `#ifndef` and not `#if` is used in the check for include guards, setting it to 1 is not needed. Change-Id: Iaa6c0f807b9e99ad3c9551abe4ab1627e5505d67 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8103 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2014-12-19intel/i945: Use define for `BSM`Paul Menzel
Change-Id: Ia58d8b410a145f27f0b267c115714580c366e063 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5929 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-12-18Drop Intel E7520 and E7525 and related boardsStefan Reinauer
There is no Cache As Ram for these boards, let's get rid of them. Also drop unused dependencies Change-Id: I94782da521c32ade7891ada29d3013cbab32a48b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7836 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-18intel/truxton: Un-romcc-ify boardStefan Reinauer
Change-Id: Iaf1756321960041f6a152d5dd4c9108291f51300 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7852 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-16Intel FSP: Move to DYNAMIC_CBMEMKyösti Mälkki
Flag the boards with BROKEN_CAR_MIGRATE, as testing for EARLY_CBMEM_INIT is not enough to disable CBMEM console for romstage on these platforms. To have CBMEM early in ramstage, define get_top_of_ram() on sandy/ivy. Change-Id: Ieefc12099a0e043eb1a7e14bdc7c6e3d209b3d8f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7468 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-12-09fsp platfoms: add prototype & consolidate main entry-pointMartin Roth
- In '-ffreestanding' main() is just as any other function and so it needs a type-signature. Fixes a clang warning. - Bay Trail and Rangeley have the updated romstage.c with the code moved into the chipset, put the prototype in romstage.c. - The sandybridge code has not been updated, so the prototype for it goes into chipset_fsp_util.h, next to the prototype for romstage_main_continue. - Correct the return value of baytrail main() from void * to void and remove the unnecessary asmlinkage tag. I'm surprised that this didn't generate a warning... Change-Id: I85ac0797d1e55d2b7ffdca039a52820d7827e704 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7724 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-07nehalem/raminit: Add decorations to specify that empty loop is intended so.Vladimir Serbinenko
Change-Id: I6a05683daa6105e26017d1abf45881a9ef93ea30 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7683 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-06northbridge/intel/*/acpi/igd.asl: Trivial indent style fixEdward O'Callaghan
Change-Id: I26e92645264c69bbc032b0e7e44d7d31de2dfa4d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7665 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-05drivers/intel/fsp: add upd macros and #definesMartin Roth
Add macros and #defines for working with the UPD data. This makes the code look much cleaner. Remove the UPD_ENABLE / UPD_DISABLE from fsp_rangeley/chip.h and include the fsp_values header instead. This fixes a conflict. Change-Id: I72c9556065e5c7461432a4593b75da2c8a220a12 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7487 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-03i82801gx: Enable upper CMOS in bootblock.Vladimir Serbinenko
Otherwise checksum may not work correctly on early stages. For compatibility with old bootblocks also enable it early in romstage. Change-Id: Ie541d71bd76af182e445aa5ef21fe5ba77091159 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7556 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-02i945: Bit 49 of CAPID0 trivial fixElyes HAOUAS
Change-Id: Ifeb277c375a0685b76fa01174a990a4cd05023bc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/7587 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-02Replace hlt with halt()Patrick Georgi
There were instances of unneeded arch/hlt.h includes, various hlt() calls that weren't supposed to exit (but might have) and various forms of endless loops around hlt() calls. All these are sorted out now: unnecessary includes are dropped, hlt() is uniformly replaced with halt() (except in assembly, obviously). Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7608 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-30Replace hlt() loops with halt()Patrick Georgi
Change-Id: I8486e70615f4c404a342cb86963b5357a934c41d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7606 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-30intel/sandybridge: make sure to stay in HLT until rebootPatrick Georgi
It also tells the compiler that we never leave here. Change-Id: I824569efd46b577588387b29fc7781abf8c42385 Found-by: Coverity Scan Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/7579 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-28i945: make PCIe link wait sensiblePatrick Georgi
Waiting for (a & 4) == 3 to become true proves futile unless you're searching for defective hardware or neutrino impact. While I'm not 100% sure that this is the actual intent (no data-sheets at hand, and the public ones are unhelpful as usual), it's the likely correct version and it's also boot-tested on intel/d945gclf. While at it, replace register number with the name found in the public datasheet. Change-Id: I4b87001967a2013e0089806e8cd606d5ee81b0d9 Found-by: Coverity Scan Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6575 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-11-27Make acpi_fill_dmar into parameterVladimir Serbinenko
Change-Id: I5e237cb7acbf47b2c8a4cd725ee8e16e422e3b17 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7371 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-26i945: Find memory controller by slot instead of by PCIID.Vladimir Serbinenko
Slot is the same on all model but PCIID varies. Tested on AOA150. Change-Id: I474548971ea140f25326a68fe8e86698a6725dea Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7569 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-11-23sandy/ivy/nehalem: Remerge interrupt handlingVladimir Serbinenko
On those chipsets the pins are just a legacy concept. Real interrupts are messages on corresponding busses or some internal logic of chipset. Hence interrupt routing isn't anymore board-specific (dependent on layout) but depends only on configuration. Rather than attempting to sync real config, ACPI and legacy descriptors, just use the same interrupt routing per chipset covering all possible devices. The only part which remains board-specific are LPC and PCI interrupts. Interrupt balancing may suffer from such merge but: a) Doesn't seem to be the case of this map on current systems b) Almost all OS use MSI nowadays bypassing this stuff completely c) If we want a good balancing we need to take into account that e.g. wlan card may be placed in a different slot and so would require complicated balancing on runtime. It's difficult to maintain with almost no benefit. Change-Id: I9f63d1d338c5587ebac7a52093e5b924f6e5ca2d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7130 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-22i945: Add 27ac to northbridge IDs.Vladimir Serbinenko
Change-Id: Ie2edf0738d0f27efa696b9f6c17600a97e323117 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7484 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-20Replace includes of build.h with version.hKyösti Mälkki
As build.h is an auto-generated file it was necessary to add it as an explicit prerequisite in the Makefiles. When this was forgotten abuild would sometimes fail with following error: fatal error: build.h: No such file or directory Fix this error by compiling version.c into all stages. Change-Id: I342f341077cc7496aed279b00baaa957aa2af0db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7510 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-19i945: Add 0x27ae to GMA IDs.Vladimir Serbinenko
Change-Id: I4c9ccc52a7fe47311761e633c72e280055fb0310 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7485 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-15sandy/ivybridge: Use DYNAMIC_CBMEM with native raminitKyösti Mälkki
Change-Id: I76577cc3739f23d392d077db5a5edfdbdbe8fb1e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7466 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-11-12gm45: Don't crash if less than 4G of RAM are present.Vladimir Serbinenko
In such setup there is no resource 5. find_resource die()s if no resource is present. Use probe_resource instead. Change-Id: I6eb4a9d8712295c58281ee69ab129276d784ca2e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7438 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-09i945: consolidate sb & nb early initsVladimir Serbinenko
Change-Id: I00c2c725de5b982a5e4f584b77b09017a5bc0a72 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7062 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-11-08fsp_rangeley: Switch to per-device ACPIVladimir Serbinenko
Change-Id: Ic8b2204a6d08d63ac7f05836bf1424f1ca6ee50e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7046 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-11-08intel: Use 'FORCEWAKE_ACK_HSW' define over '0x130044'Edward O'Callaghan
Change-Id: I1cf87b3c73d8bf8846e5870b19b089f85c299567 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7241 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-11-01northbridge/intel: Use DEVICE_NOOP macro over dummy symbolEdward O'Callaghan
Change-Id: I9aeed70f72d4df260312df6e53379f1741415b65 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7287 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2014-10-29intel/sandybridge: Add PCI ID for northbridge 0x150Damien Zammit
Change-Id: I335244b7c39d6ddff6ecb06cb823fee09e35ee26 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/7233 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-24sandybridge: Kill CONFIG_HAVE_MRC_CACHEVladimir Serbinenko
Change-Id: I54955fa44d126b7a3d382f57b4aa0dac01688104 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7129 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-24sandy/ivy native: dedup romstage.c main()Vladimir Serbinenko
Change-Id: I9909a5b2bdb4b59219db6304fa4332802fe0301c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7127 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-23intel/sandybridge: Add VGA pci device ID 0x0162Damien Zammit
for Ivy Bridge. Tested on Gigabyte ga-b75m-d3h. Change-Id: I7a1b1e8bac38789321960ebbe8c97d68a5aebfe2 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/7173 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-19e7501: Move to perdev ACPIVladimir Serbinenko
Change-Id: Ic8472745c2ff0c68fd63b51d1a149a11be1650e9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7047 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-19x86 romstage: Move stack just below RAMTOPKyösti Mälkki
Placement of romstage stack in RAM was vulnerable for getting corrupted by decompressed ramstage. Change-Id: Ic032bd3e69f4ab8dab8e5932df39fab70aa3e769 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7096 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-18i3100: Convert to per-device ACPIVladimir Serbinenko
Change-Id: Id90db4f6ce1a5fb506c81bc3a6010d85b0aa8c43 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6940 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-18fsp_sandybridge: Move to per-device ACPI.Vladimir Serbinenko
Just took combined sandybridge per-device ACPI patch and applied it on FSP flavour to avoid need of separate tests. Change-Id: I09838cc01ede504416078edcb1c267a11539e714 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7044 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-18sch: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I4cf0a67b0251d2d3adff5de74bf56b7d4c4524ee Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6811 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-18e7505: Move to per-device ACPIVladimir Serbinenko
Change-Id: I706891b9408cf14b559ef228766c04e98345ff6e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6938 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-10-16sandybridge: Move common northbridge finalize to northbridge code.Vladimir Serbinenko
Change-Id: I6d4178e5aaffc1330b0953b0601bf6b448250a8e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6920 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-16ACPI: Remove CONFIG_GENERATE_ACPI_TABLESVladimir Serbinenko
As currently many systems would be barely functional without ACPI, always generate ACPI tables if supported. Change-Id: I372dbd03101030c904dab153552a1291f3b63518 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4609 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-15i945: Convert to per-device ACPIVladimir Serbinenko
Change-Id: Iee3ee33ca58b8c722d2d38aae31e7130032512ad Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6804 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-15gm45: Convert to per-device ACPIVladimir Serbinenko
Change-Id: Ib04b03b2dc2ad3bfa886b43df9dd6518bbb46e3f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6803 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-11acpi: Remove explicit pointer tracking in per-device ssdt.Vladimir Serbinenko
It's useless and error-prone. Change-Id: Ie385e147d42b05290ab8c3ca193c5c871306f4ac Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7018 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-01intel/i945: Another magic numberPatrick Georgi
Replace it with the existing #define Change-Id: I6e67ed1a455cd4f9eeed1865b9ef981e7ef0a874 Found-by: Idwer Vollering Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6992 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-10-01intel/i945: Fix "always false" statementPatrick Georgi
Also replace magic number with already existing #define Change-Id: I64d22aca185bf43ff0ac126584b41920182a1112 Found-by: Coverity Scan Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6990 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-09-25peppy and falco: set panel power timings in northbridge, using devicetree, ↵Ronald G. Minnich
not mainboards Historically we had set panel timing in the mainboard gma code. This goes back to the replay-attack video startup. We can let the haswell gma code set these values from the device tree settings. Change-Id: If32150d2857241ca2d2c88880086f49d25815d76 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/180521 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 406eab3ca6a9bc59382866817786bf96bbb19d56) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6911 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-09-24northbridge/intel/i945/Kconfig: Select VGAPaul Menzel
Commit 0092c999 (i945: Support text mode gfx init) [1] broke building the Lenovo X60 with native graphics initialization by selecting `CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT`. CC northbridge/intel/i945/gma.ramstage.o src/northbridge/intel/i945/gma.c: In function 'intel_gma_init': src/northbridge/intel/i945/gma.c:398:2: error: implicit declaration of function 'vga_textmode_init' [-Werror=implicit-function-declaration] Selecting the Kconfig variable VGA makes the declaration of the function `vga_textmode_init()` to be included by the preprocessor. [1] http://review.coreboot.org/6723 Change-Id: Iecbb2898193078b8738425cea13cb7e6da508cab Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6947 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2014-09-22haswell: Move to per-device ACPIVladimir Serbinenko
Change-Id: Ic724dcf516d9cb78e89698da603151a32d24e978 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6814 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-13intel/gma: consolidate vbt codeVladimir Serbinenko
Change-Id: I80b7facfb9cc9f642dd1c766884dc23da1aab2c8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6800 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-11Move nehalem/sandy/ivy to per-device acpiVladimir Serbinenko
Change-Id: I3d664ab575bf9c49a7bff9a395fbab96748430d0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6802 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-09-08Haswell/falco/peppy/slippy: continue to clean up FUI.Ronald G. Minnich
As a first step towards removing hardcodes from the FUI support, change the haswell call to i915_lightup to panel_lightup, and pass the intel_dp * as a parameter. Get rid of the scalar arguments and make them part of intel_dp. Get rid of file-scope variables and use the ones in the intel_dp struct. In falco, use functions that peppy uses. Drop slippy support for FUI, it's a dead board; if this is ok I'll remove the files next. And, incidentally, fix the broken RGBX constant and change it to BGRX. Change-Id: I46ef5a9ed8433382d042066ee3542af04cfc319a Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/174932 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 1e1ed410b445c8e2b7411e163d9d6f61499dc3f6) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6833 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-08-30sandybridge: Add native sandybridgeVladimir Serbinenko
Change-Id: I1b51310b4387e588c4828563620b0e2770598503 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6753 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-26Peppy, Haswell: refactor and create set_translation_table function in ↵Ronald G. Minnich
haswell/gma.c The code to set the graphics translation table has been in the mainboards, but should be in the northbridge support code. Move the function, give it a better name, and enable support for > 4 GiB while we're at it, in the remote possibility that we get some 8 GiB haswell boards. Change-Id: I72b4a0a88e53435e00d9b5e945479a51bd205130 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/171160 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit d5a429498147c479eb51477927e146de809effce) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6741 Tested-by: build bot (Jenkins)
2014-08-25intel/gma: Clarify code and use dedicated init for Google PeppyRonald G. Minnich
Peppy had some issues with FUI. We decided it was time to create peppy-specific gma.c and i915io.c files. Using yabel and the i915tool, we generated a replay attack, then interpolated against the slippy i915io.c to get something working. Also, in preparation for moving code out of the mainboard gma.c to generic driver code, we got rid of some hardcodes in the mainboard gma.c that have no business being there. The worst were the computation of gmch_[m,n] and it turns out that we had some long-standing bugs related to confusion about 'bpp'. I've killed the word bpp everywhere I could because there are at least 3 things that correspond to bpp. We now have framebuffer, pipe, and panel bpp. The names are long because I want to avoid all the mistakes we've all been making in the last year :-) Sadly, that means a lot of changes not just peppy-related, but they are simple and in a good cause. The test pattern generation is driven by a global variable in mainboard/peppy/gma.c. I've found in the past that it's very useful to have a function like this available, as one can activate it while using a jtag debugger: halt at the right place in ramstage, set the variable to 1, continue. It's not enough code to worry about always including. The last hard-codes for M and N registers are gone, and the function to set from generic intel_dp.c code works. To avoid screen trash on a dev mode boot, which we liked but nobody else did :-), we now take the time to put a pleasing background color that sort of doubles as a power LED. Rough timing is ramstage start is at 2.2, and dev setup is done at 3.3. These new platforms are depressingly slow to boot. Rom init alone is taking 1.9 seconds. 13 years ago it was 3 seconds from power on to bash prompt. These CPUs are at least 10x faster and take much longer to get going. Future work, once we get this through, is to move more functions to the intel driver, and combine the mainboard i915io.c into the mainboard gma.c. That separation only existed because i915io.c was generated by a tool, and it had lots of ugliness. Most ugliness is gone. Old-Change-Id: I6a6295b423a41e263f82cef33eacb92a14163321 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://chromium-review.googlesource.com/170013 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com> (cherry picked from commit 8cdaf73e3602e15925859866714db4d5ec6c947d) snow: Fix a typo in devicetree.cb that was breaking the snow build. A typo in a recent change broke the snow build. Old-Change-Id: I93074e68eb3d21510d974fd8e9c63b3947285afd Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171014 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 154876c126a6690930141df178485658533096d2) Squashed a fix into the initial patch and updated nehalem/gma.c to have a non-static gtt_poll. Change-Id: I2f4342c610d87335411da1d6d405171dc80c1f14 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6657 Tested-by: build bot (Jenkins)
2014-08-25sandybridge: Show spew raminit messages only with raminit debugVladimir Serbinenko
Change-Id: Ifbc59c28c8d8bd844801da9cb869c5dfbda09168 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6754 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-25sandybridge: Native gfx init.Vladimir Serbinenko
Change-Id: I07590086ffe3b1d068fa6ae6b156039cc2e55893 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6755 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-22lenovo/x200: Move video ASL code to northbridge.Vladimir Serbinenko
Change-Id: I58760500252e78da947685c18201b6d446368333 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6729 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-21Merge LCD on nehalemVladimir Serbinenko
Change-Id: I09852ea56495da17e7607064d74d98f2296f34b1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6721 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-21Merge LCD on sandy/ivyVladimir Serbinenko
Change-Id: Ibf66d46f47fe465cc805f85de818a77327cd7258 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6722 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-21i945: Support text mode gfx initVladimir Serbinenko
Change-Id: I952fdb113e2696785695b416d9292b7107099994 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6723 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-21i945/gma: don't map the page tableVladimir Serbinenko
Change-Id: I20fb5323cde1f83a3d3adc98251b2f31de25ed24 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-21i945: Remove GTT avoidance offset.Vladimir Serbinenko
Not needed anymore with GTT at the end of range. Change-Id: I57b02c7d605d3c43ac92bd744bb6472e3c3471e2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6717 Tested-by: build bot (Jenkins) Reviewed-by: Francis Rowe <info@gluglug.org.uk> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-20intel/i945/gma: Place GTT below top of memoryPaul Menzel
Since commit 17fec8a0 [1] drm/i915: Use Graphics Base of Stolen Memory on all gen3+ present in the Linux kernel since version 3.12, 3D does not work anymore [2]. Comparing the graphics registers, in this case that means output of `intel_reg_dumper`, the vendor Video BIOS is setting the register PGTBL_CTL/PGETBL_CTL, only documented in the i965 datasheet [3], to `0x3ffc0001` on a system with 1 GB of RAM, while native graphics init sets it to `0x3f800001`. Currently native graphis init sets the GTT right above the base address of stolen memory. The Video BIOS sets it below the top of memory. The Linux Intel driver expects it to be below top of memory, so do it this way, by setting the address to TOM minus the size of the GTT, which is hardcoded to 256 KiB. As `PGETBL_CTL` is zero by default, reading its value in the beginning is not necessary and is only confusing. Make it clear that the code calculates the value. There is still a PTE error reported during boot, but 3D works with Linux 3.12+ and no user visible problems are shown. [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=17fec8a08698bcab98788e1e89f5b8e7502ababd [2] https://bugs.freedesktop.org/show_bug.cgi?id=79038 [3] https://01.org/linuxgraphics/sites/default/files/documentation/965_g35_vol_1_graphics_core_0.pdf Intel ® 965 Express Chipset Family and Intel ® G35 Express Chipset Graphics Controller Programmer’s Reference Manual Volume 1: Graphics Core Revision 1.0a Change-Id: I0a5b04c2c5300f5056cb48075aa5804984bc9948 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/5927 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-08-17gm45: Declare BIOS memory as RAM.Vladimir Serbinenko
So it's in line with other boards and those addresses are cached for faster access. Change-Id: I7794d75ef1e3ceea6b2a4acba01e4af5d1f005f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6689 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-17i945: Replace video gfx init.Vladimir Serbinenko
Old init was a replay not even meant to have been committed. This one really computes values and does its job. Tested on Macbook2,1 (1280x800) and X60 (1024x768). Change-Id: I61b6946c095fe06e20ae9a0db54696d0568225dd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5320 Reviewed-by: Francis Rowe <info@gluglug.org.uk> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16gm45: Decrease MTRR usageVladimir Serbinenko
Change-Id: I4c790b0eaf2af94286e6691281fcad3d14659a99 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6687 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16gm45: Make UMA size configurable.Vladimir Serbinenko
Change-Id: I27b2ec70b9c77f3caf9d52788f46f5dc16045d1b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6686 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16gm45: Recognize 48MiB gfx UMA.Vladimir Serbinenko
Change-Id: I33e6b357ea044d6ec00b119e84cbada7bf58317f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6685 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16intel/gm45: native gfx init.Vladimir Serbinenko
Tested on lenovo X200 in both text and gfx mode. Change-Id: I273971d0f34ca3529959d4228e9516775459b806 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6682 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-14gm45: Set acpi_slp_type only once.Vladimir Serbinenko
It doesn't harm to set several times but it pollutes the log. Change-Id: I7aad7f0229a7d9d071ba844a1cfa123dffc4cacf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6653 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-08-13Falco/Slippy: Patch to refactor haswell/gma.c and ↵Furquan Shaikh
mainboard/google/slippy/i915io.c A large portion of documented registers have been initialized using macros. Only a few undocumented registers are left out. i915io.c looks lot more cleaner by removing redundant calls. However, some more work is required to correctly identify which calls are not required. All the io_writes are replaced by gtt_writes. Change-Id: I077a235652c7d5eb90346cd6e15cc48b5161e969 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/66204 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 39f3289f68b527575b0a120960ff67f78415815e) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6600 Tested-by: build bot (Jenkins)
2014-08-13gm45: Allow skiping voltage config.Vladimir Serbinenko
Change-Id: I81b9966212d09d4d2561b3adc20d6d8a8a200f4b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6630 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-12gm45: Move S3 detection to enable stage.Vladimir Serbinenko
Also move it to NB to be in line with other. Change-Id: Ibd961d60dcd686899f34f6a494c14ff9d65e618b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6625 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12gm45: Reserve RAM for ME if it's active.Vladimir Serbinenko
Change-Id: Icd2b075cec9461f9d6028a8c845f6900b6fe04c8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6628 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12gm45: Allow coexistance with ME firmware.Vladimir Serbinenko
Change-Id: I08ca5eec94c70b43789122266d68af149772385c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6626 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12gm45: Ensure that brightness register in gma contains sane value.Vladimir Serbinenko
Change-Id: Ia66c71c3adf2ae0d413750b5e59e3eaba3888a0b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6587 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-11gm45: Declare brightness variables for ACPI use.Vladimir Serbinenko
Change-Id: I23a088919aaac16066e5dd8300a081a8095a93f0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6589 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-11northbridge/intel/*/gma.c: Remove dead codeEdward O'Callaghan
Remove some dead coded spotted in Clang builds. Change-Id: Ia23e16eae76593eee249e0894ef1d704a274616f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6130 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-08-11gm45: Set default VGA PCIID.Vladimir Serbinenko
Change-Id: I2eba1ca27c1f8181a9c6288f6794922915575790 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6586 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-24 00:36:17 +0000