summaryrefslogtreecommitdiff
path: root/src/northbridge/intel/x4x
AgeCommit message (Collapse)Author
2018-01-05nb/intel/x4x: Disable watchdog, halt TCO timer and clear timeoutArthur Heymans
Especially on ICH7 failing to do so results in i2c block read being unusable. On ICH10 this problem doesn't manifest itself that much. This moves disabling the watchdog reboot to the northbridge code like i945 (even though it technically is southbridge stuff). TESTED on Intel DG41WV: hacking on raminit is much nicer since no need to do a hard power down for +4s are needed to clear the timeouts. Change-Id: Icfd3789312704f61000a417f23a121d02d2e7fbe Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-12-16nb/x4x/raminit: Rewrite SPD decode and timing selectionArthur Heymans
This is mostly written from scratch and uses common spd ddr2 decode functions. This improves the following: * This fixes incorrect CAS/Freq detection on DDR2; * Fixes tRFC computation; tRFC == 78 is a valid timing which is excluded and 0 ends up being used; (TESTED) * Timings selection does not use loops; * Removes ddr3 spd decode and is re-added in follow-up patches using common ddr3 spd functions; * Raminit would bail out if a dimm was unsupported, now in some cases it just marks the dimm slot as empty; * It dramatically reduces stack usage since it does not allocate 4 times 256 bytes to store full SPDs, amongs other unused things that were stored in sysinfo; * Reports when no dimms are present; * Uses i2c block read to read SPD which is about 5 times faster than bytewise read, with a fallback to smbus mode in case of failure, which does seem to happen when the system is forcefully powered off. Change-Id: I760eeaa3bd4f2bc25a517ddb1b9533c971454071 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-12nb/intel/x4x/rcven.c: Fix programming coarse offsetArthur Heymans
This fixes some bitwise logic errors that caused the coarse offset not to be programmed. This fixes a regression introduced by 6d7a8c "nb/intel/x4x/raminit: Rework receive enable calibration" where the coarse offset doesn't get programmed anymore. TESTED on Foxconn g41s-k on a DIMM where the final DQS receive enable delays are close but above and below the edge of a coarse delay setting. Change-Id: I41869815f782a2ea1178bdea006e3a7587441323 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-13nb/intel/*/gma: Port ACPI opregion to older platformsPatrick Rudolph
Port the ACPI opregion implementation that resides in drivers/intel/gma to older platforms. It allows to include a vbt.bin and allows GNU/Linux to load the opregion as ASLS is being set. Windows' Intel will likely ignore it as it relies on legacy VBIOS to be loaded at 0xc0000. Tested successfully on DG43GT (x4x) with vbt.bin, with X200 (gm45) with vendor option rom and D945GCLF (i945) with fake vbt. Change-Id: I1896411155592b343e48cbd116e2f70fb0dbfafa Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-22nb/intel/x4x: Select LAPIC_MONOTONIC_TIMERArthur Heymans
Needed for coreboot spi driver. Change-Id: I01059c8cbdc6a002dfd75b6da3a629811b137702 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-20nb/intel/x4x: Fix booting with FSB800 DDR667 combinationArthur Heymans
A small typo in the dll setting code prevented this combination from booting. TESTED on ga-g41m-es2l with 800MHz FSB CPU and 667MHz ddr2 Change-Id: Ib013471773c20336ba0902b7f328bfb6ef970747 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-08-20nb/intel/x4x/raminit: Rework receive enable calibrationArthur Heymans
Moves receive enable calibration to a separate file to lighten raminit.c a bit. Receive enable calibration is quite similar to gm45 so it reuses some of its function names. The functional changes are: * the minimum coarse is now reset for each channel; * on the second fine search for DQS high, TAP overflow is handled by increasing medium; * start coarse at CAS + 1 instead of CAS - 1. Other Intel northbridges do the same and the results are more in line with register dumps from vendor bios. These might improve stability. TESTED on ga-g41m-es2l Change-Id: I0c970455e609d3ce96a262cbf110336a2079da4d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-11nb/intel/x4x/gma.c: Probe VGA EDID on DVI-I portsArthur Heymans
This allows the use of the native VGA init on boards featuring DVI-I ports. Digital output is not supported. Change-Id: I11a4dd68746e06c7e27ecf3e765bdd0d8cf40515 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-07nb/intel/*/gma.c: Use macros for GMBUS numbersArthur Heymans
Change-Id: I885b6bd9f5be6b4e3696a530016123a3e81c4b10 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-07-21nb/intel/x4x: Rework programming DQ and DQS DLL timingsArthur Heymans
This does the following: * Clarify that settings are set to the same value for each rank; * Allows to program coarse * Fix some style issues like white spaces between arithmetic operators. Change-Id: I3a9e28cfec915a0bb15789c23bea259f621b5096 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-21sb/intel/i82801jx: Add correct PCI ids and change namesArthur Heymans
Change-Id: Ic9226098dafa2465aa5fccc72c442de2b94e44c7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04Kconfig: Add choice of framebuffer modeNico Huber
Rename `FRAMEBUFFER_KEEP_VESA_MODE` to `LINEAR_FRAMEBUFFER` and put it together with new `VGA_TEXT_FRAMEBUFFER` into a choice. There are two versions of `LINEAR_FRAMEBUFFER` that differ only in the prompt and help text (one for `HAVE_VBE_LINEAR_FRAMEBUFFER` and one for `HAVE_LINEAR_FRAMEBUFFER`). Due to `kconfig_lint` we have to model that with additional symbols. Change-Id: I9144351491a14d9bb5e650c14933b646bc83fab0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers that support a linear framebuffer. Some related settings moved to the drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are hardcoded. Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02Kconfig: Rework MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFGNico Huber
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER. * Let drivers select it if they are in charge. * Don't select it on the mainboard level if a driver handles it. Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-24nb/intel/x4x/raminit: Initialise async variableArthur Heymans
It could end up not initialized which causes it not to build with clang. Change-Id: I3be9477d836123aaa87c9bebb41c1ec34689a771 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-22nb/intel/x4x: Use a struct for dll settings instead of an arrayArthur Heymans
This makes the code more readable since it avoids messing with two dimensional arrays and needing remember what the indices mean. Also introduces an unused coarse element which is 0 for all default DLL settings on DDR2. Change-Id: I28377d2d15d0e6a0d12545b837d6369e0dc26b92 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-21nb/intel/x4x: Make raminit less verbose with CONFIG_DEBUG_RAM_SETUPArthur Heymans
Hides JEDEC steps using the RAM_SPEW macro. Also hides a hexdump of SPDs. Change-Id: Ie2b484cf1f1d296823df0473e852d9d07ca20246 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-20nb/intel/x4x/raminit: Remove very long delayArthur Heymans
It is not really known why there is such a long delay, but it works fine without it. TESTED on ga-g41m-es2l. Change-Id: Idff5b978bbf161f8520d8000848e7b11c98c3945 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19514 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-13nb/intel/x4x: Fix uninitialized variable issueNico Huber
A left-over from 5e3cb72a71 (nb/x4x: Do not enable IGD when not supported). Should fix coverity issue 1375009. Remove a redundant line that uses the variable `gfxsize` out of its scope and move the variable declaration. Make sure the variable is always initialized, drop unneeded error-handling for `get_option()` and sanitize the read value instead. Change-Id: Iee2beda30d8c74df0f412622c3ff3357819e386b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19680 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-11nb/intel/x4x: Define and use default MMCONF_BASE_ADDRESSArthur Heymans
Currently only one board uses this northbridge in coreboot but some patches are pending to add more. Change-Id: If035e442d1a23674667f46a07b44c4f2b81be48c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-10nb/intel/x4x: Add support for second PEG slotArthur Heymans
Is only present on the P45 subtype of chipset. Change-Id: I6b138db6654c83c40b5ca4b65d6ccd51ad4277fa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-09nb/x4x: Do not enable IGD when not supportedArthur Heymans
According to "Intel ® 4 Series Chipset Family datasheet" in the description about GGC and DEVEN, CAPID0 bit46 is said to reflect the presence of an internal graphic device. This would allow the P43 and P45 chipset variants to work. Change-Id: Icdaa2862f82000de6d51278098365c63b7719f7f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18515 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-09nb/intel/x4x: Don't run NGI if IGD has not been assigned VGA cyclesArthur Heymans
The NGI writes to legacy VGA registers which should not happen when VGA cycles are assigned to a different device. TESTED on ga-g41m-es2l Change-Id: I0a03e35c0d7f2532edd6cc5e62d1cf07dab57f60 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-09nb/x4x: Add ramstage IGD disable functionArthur Heymans
This disables VGA cycles on IGD when an external VGA device is found. This allows PCI or PCIe devices to be the 'main' VGA device if found, while the IGD is still available. TESTED on ga-g41m-es2l: SeaBIOS shows payload on external GPU while linux (4.10) can use both as a framebuffer simultaneously without any extra configuration. Change-Id: I74890918feb0f1ff6b971c4aaa96f1f7b75266ac Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-09nb/x4x/nortbridge.c: Compute TSEG resource allocation dynamicallyArthur Heymans
Computes TSEG size dynamically. Changes the size of legacy hole to match other Intel northbirdges. Refactor this a little by needing one less variable. Change-Id: I0e6898c06a2bc1016eeaa3f002ff6c39657018ae Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-08nb/x4x/raminit.c: Remove ME locking codeArthur Heymans
This code ought not to run if ME is disabled. It also prohibits writing to some GMCH regs like GGC bit1. Intel ® 4 Series Chipset Family datasheet refers to this as "ME stolen Memory lock" without actually describing this functionality. Change-Id: Iaa8646e535e13c44c010ccd434a5af954cf7dfbc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-04nb/intel/x4x/raminit: Change reset type on incomplete raminit resetArthur Heymans
The checkreset() function checks if raminit previously succeeded (pmcon2 bit7 == 0). If this is not the case it will issue a hot reset (writing 0x6 to 0xcf9). On the next attempt to boot the system BOOT_PATH_RESET path will be taken. This boot path can only successfully initialize memory if the system was reset from a state where raminit succeeded, which is not the case here. This can be fixed by issuing a cold reset instead of a hot reset. Change-Id: Idbcf034c3777a64cc3fb92dc603d10470a6c8cb6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-15nb/intel/x4x/Kconfig: Don't fix CBFS_SIZE on i82801gx southbridgeArthur Heymans
The x4x northbridge can be paired with either an ICH7 (in the case of g41) or an ICH10 (all other cases: g45, q45, p45, ...). Only ICH10 sometimes occurs with a descriptor, gbe and an ME region. ICH7 is always descriptorless so it makes no sense to fix CBFS to accommodate for those other objects. Change-Id: I4a01dfdbce1807e44932a3ac812110382332abd8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19181 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-21nb/x4x: Move checkreset before SPD readingArthur Heymans
It makes no sense to read SPDs if the system will reset anyway. Change-Id: Id2ad9b04860b3e4939a149eef6b619a496179ff8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17661 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-21nb/intel/x4x: Fix issues found by checkpatch.plArthur Heymans
Change-Id: Ie22b8bd5420f8c33df1866410af42ef41ad38362 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18694 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-17nb/intel/x4x: Implement resume from S3 suspendArthur Heymans
It rewrites the results of receive enable stored in the upper nvram region, to avoid running receive enable again. Some debug info is also printed about the self-refresh registers. (Not enforcing a reset here, since 0 does not necessarily mean it's not in self-refresh). Change-Id: Ib54bc5c7b0fed6d975ffc31f037b5179d9e5600b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17998 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-17nb/intel/x4x: Fix raminit on reset pathArthur Heymans
Previously the raminit failed on hot reset and to work around this issue it unconditionally did a cold reset. This has the following issues: * it's slow; * when the OS issues a hot reset some disk drives expect their 5V power supply to remain on, which gets cut off by a cold reset, causing data corruption. To fix this some steps in raminit must be ommited on the reset path. This includes receive enable calibration. To achieve this it stores receive enable results in RTC nvram for them to be rewritten on the resume path. Note: The same thing needs to be done on the S3 resume path. Calling a hot reset after raminit "outb(0x6, 0cf9)" works. Change-Id: I6601dd90aebd071a0de7cec070487b0f9845bc30 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18009 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-22nb/x4x/raminit: Fix programming dram timingsArthur Heymans
The results were obtained by comparing the MCHBAR registers of vendor bios with coreboot at the same dram timings. This fixes 2 issues: * 1333MHz fsb CPUs were limited to 667MHz ddr2 speeds, because with 800MHz raminit failed; * 1067MHz fsb CPUs did not boot when second dimm slot was populated. TESTED on ga-g41m-es2l on 800, 1067 and 1333MHz CPUs with DDR2 667 and 800MHz dimms. Change-Id: I70f554f97b44947c2c78713b4d73a47c06d7ba60 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18022 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-06nb/intel/*/northbridge.c: Remove #include <device/hypertransport.h>Arthur Heymans
Nothing from that header is used or even declared since CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT is not selected on Intel hardware. Change-Id: I9101eb6ffa6664a2ab45bc0b247279c916266537 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18044 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2016-12-17nb/x4x: Add other Eaglelake IGD PCI DID to listArthur Heymans
Currently only there is only one eaglelake board in coreboot (ga-g41m-es2l) featuring a G41 variant northbridge. Adding boards with a different variant (Q43, Q45, G43, G45, B43) will require this change for graphic initialisation. Change-Id: Ida32c563a99576b66685dfdadf9a534fd6e197dc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17900 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-11intel i945 gm45 x4x: Switch to RELOCATABLE_RAMSTAGEKyösti Mälkki
Change-Id: I2085fc3a17d32cfbdab9ec0b7afbc01031e75b47 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17785 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11intel i945 gm45 x4x post-car: Use postcar_frame for MTRR setupKyösti Mälkki
Adapt implementation from skylake to prepare for removal of HIGH_MEMORY_SAVE and moving on to RELOCATABLE_RAMSTAGE. With this change, CBMEM region is set early-on as WRBACK with MTRRs and romstage ram stack is moved to CBMEM. Change-Id: Idee5072fd499aa3815b0d78f54308c273e756fd1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15791 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11intel i945 gm45 x4x: Apply cbmem_top() alignmentKyösti Mälkki
Force modest 4 MiB alignment to help with MTRR assignment. Change-Id: I49a7d1288bc079da1b8bd52150ddcfcfe2e51179 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17780 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08buildsystem: Drop explicit (k)config.h includesKyösti Mälkki
We have kconfig.h auto-included and it pulls config.h too. Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17655 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-03nb/x4x: Fix sticky scratchpad register offsetArthur Heymans
Change-Id: I9b952e32dc661f5c1fa96b037b415693d8777b04 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17685 Tested-by: build bot (Jenkins) Reviewed-by: Damien Zammit <damien@zamaudio.com>
2016-11-28nb/intel/x4x/raminit: Fix DIMM_IN_CHANNEL calculationNico Huber
Fix-up for 696abfc nb/intel/x4x: Fix and deflate `dimm_config` in raminit It didn't fix the channel-number shifting issue as intended. The channel index is either 0 or 1. DIMMs are counted from 0 to 3 where 0..1 covers channel 0, and 2..3 covers channel 1. Since we have two DIMMs per channel, we have to multiply the channel index by 2 (or shift it left by 1) to get the index of the first DIMM in the channel. Finally, to get the offset of a DIMM in the channel we take its index modulo 2 (again, the number of DIMMs per channel). Change-Id: I2784b0cb655bfe823bf5fa48b722623dfca1ddc3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17612 Tested-by: build bot (Jenkins) Reviewed-by: Damien Zammit <damien@zamaudio.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-11-26nb/intel/x4x: Fix and deflate `dimm_config` in raminitNico Huber
By shifting the `chan` right instead of left, values were always taken from the DIMMs of the first channel. The diff-stat also looks like an improvement. Change-Id: I605eb4f9b04520c51eea9995a2d4a1f050f02ecc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17587 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-21nb/intel: Fix some spelling mistakes in comments and stringsMartin Roth
Change-Id: I4a8297397d878e38516c8df19dd311c7ef19ec06 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17478 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-11intel post-car: Separate files for setup_stack_and_mtrrs()Kyösti Mälkki
Have a common romstage.c file to prepare CAR stack guards. MTRR setup around cbmem_top() is somewhat northbridge specific, place stubs under northbridge for platrform that will move to RELOCATABLE_RAMSTAGE. Change-Id: I3d4fe4145894e83e5980dc2a7bbb8a91acecb3c6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15762 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-08nb/x4x/raminit.c: Improve crossclock table cosmeticsArthur Heymans
Change-Id: I3f692c55fdff99aa9eb41eaaea79a41ac93be590 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17170 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-26nb/x4x/gma.c: Remove writes to DP, FDI registersArthur Heymans
Those registers are only used on more recent Intel platforms featuring a PCH. The DP registers on G4X hardware are at a different offset. Change-Id: I4660e547426ccec0b2095d897e4a8c86e0acf41e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17111 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-19nb/gm45,x4x/gma.c remove writes to nonexisting FDI registersArthur Heymans
This removes writes to FDI related registers since there is no FDI link on these targets. This is likely a remainder from copying code from later targets. TESTED on Thinkpad x200 (gm45) Change-Id: Id67fdc999185fa184a9ff0e5c3fc9bced04131ad Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16993 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-10-19nb/i945,gm45,x4x/gma.c: fix unsigned arithmeticsArthur Heymans
This issue was found by Coverity Scan, CID 1364118. Change-Id: Iba3c0f4f952729d9e0987d928b63ef8b8fe8841e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16992 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-10-19nb/gm45,x4x/gma.c: Compute p2 in VGA init instead of hardcoding itArthur Heymans
According to: "Intel ® 965 Express Chipset Family and Intel ® G35 Express Chipset Graphics Controller PR" the p2 divisor needs to be 10 when the dotclock is below 225MHz and 5 when its above 225MHz. Change-Id: I363039b6fd92051c4be4fdc88788f27527645944 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16991 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-11nb/intel/*/graphic_init: use sizeof instead of hardcoding edid sizeArthur Heymans
Change-Id: I2b8c4ef75cca9f9d5251789cda4187a02076b69d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16964 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-10x4x/gma.c: Add VESA native resolution modeArthur Heymans
This patch implements native resolution, VESA mode, on the VGA output of x4x. It relies on EDID to modeset, but has a fallback-mode (640 x 480 @ 60Hz) if this is no EDID could be found. This fallback mode only works in textmode since in VESA mode some payloads (grub2) rely on VBE info, which is being generated from an EDID. Change-Id: I247ea7171ba3c5dc3b209d00e4dcb2d2069abd75 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16498 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04src/northbridge: Remove unnecessary whitespaceElyes HAOUAS
Change-Id: Ib06ecd083f00c74f1d227368811729d2944dd1ef Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16851 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-27nb/intel/*/gma.c: remove spaces at the fake vbt generationArthur Heymans
Padding the VBT id string is now done automatically. Change-Id: I8f9baf7b1585026bc29b82d07e451aa11e284ffb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16740 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-12src/northbridge: Improve code formattingElyes HAOUAS
Change-Id: Iffa058d9eb1e96a4d1587dc3f8a1740907ffbb32 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16414 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-10northbridge/intel/x4x: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/intel/x4x. Change-Id: I65cd02eacf57cb41ded434582ca6e9d9f655e6ea Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16472 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-07nb/intel/x4x: Correct typos in interrupt routing for PEGDamien Zammit
Device 1 on secondary bus instead of device 0 was being routed. Change-Id: I4207938038acf7ff941afd692e90a690d2426a05 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16515 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-07nb/intel/x4x: Turn on PEG graphics in device enableDamien Zammit
Change-Id: I389c4630362af1c1bf6d281c9d2b7fc81bea2d5d Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16495 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-07nb/intel/x4x: Increase MMIO PCI space to 2GiBDamien Zammit
This is necessary for PCI express graphics card add-ons, otherwise the pci allocator cannot fit the mmio for the add on card into the space it has available and the OS turns off the card. Old value was 1GiB. Change-Id: I606994501b15e636fe209d1ed4b3d3f73b42bf5c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16494 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-07nb/intel/x4x: Fix DMI initDamien Zammit
No more hang on DMI init when wait for DMI is re-enabled. Previously the virtual channel arbitration table was not being set up in the south/north bridges causing invalid DMI state. This has been tested on GA-G41M-ES2L with patches following. An NVIDIA GT218 card was detected by the OS and displayed using the nouveau driver with no blobs. Change-Id: I35e03c40f5f7aa4915afd5d26db7ab053abcf0cd Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16491 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31northbridge/intel: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I53208ce5db06d2c65f954e6d59222924ab87722e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16304 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-09x4x: make preallocated IGD memory a cmos optionArthur Heymans
This allows to set the preallocated memory for the IGD on x4x using a cmos option. If no cmos option is found a default value of 64M is used. TESTED most options on ga-g41m-es2l with 2G dimm in one slot and 2x2G. 352M also works in contrast with gm45 where it is known to cause issues with certain ram combinations. Change-Id: I9051d080be82f6dfab37d353252e29b2ed1fca7f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15492 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09x4x: add non documented vram sizesArthur Heymans
The Intel documtentation, "Intel ® 4 Series Chipset Family" mentions the possibility of 1, 4, 8 and 16M of preallocated memory for the IGD, but does not document this. This allows to set those undocumented values. TESTED on ga-g41m-es2l with 2G dimm in one slot and 2x2G. Change-Id: I92beb8d78907d4514a5aaf69248dd607dcf227c0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15491 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-27nb/intel/x4x: Fix CAS latency detection and max memory detectionDamien Zammit
Now hardcode maximum memory frequency capability to 800MHz, as all chipsets in x4x family support PC2-6400 according to the datasheet. CAS latency detection also relies on this, and has been cleaned up. Ram initialization does not work with FSB 1333MHz / DDR2 800MHz combination, so disable this combination for now, and reduce to 667MHz instead. Still don't know why this is the case, but FSB1333/667 works. These changes should now allow existing configurations to continue working, while providing support for previously unworking configurations, due to previous buggy CAS latency detection code. TESTED: on GA-G41M-ES2L CPU: E5200 @ 2.50GHz (FSB 800MHz) 2x 1GB 667MHz hynix worked @ 667 1x 2GB 800Mhz ARAM worked @ 800 1x 1GB 667Mhz StarRam worked @ 667 2x 2GB 800Mhz (generic) worked @ 800 Change-Id: I1ddd7827ee6fe3d4162ba0546f738a8f9decdf93 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15818 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-19nb/intel/x4x: Fix CAS latency detectionDamien Zammit
Fix and use the failsafe CAS detection logic rather than recalulating the values from raw SPDs. Tested on GA-G41M-ES2L with 2x2GB DDR2-800 DIMMs (which worked before and still work) Change-Id: I6af0f1705d099f7bcbff8c9baa94a68dae689e01 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15726 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2016-07-15intel/x4x: Do not use scratchpad register for ACPI S3Kyösti Mälkki
If S3 support was implemented for this platform later on, use romstage handoff structure instead. Change-Id: I03c1e07a7fcc17c27203d0c4e32e3958f2ba5273 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15716 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2016-07-09nb/intel/x4x: Fix underclocking of 800MHz DDR2 RAMDamien Zammit
Previously, any 800MHz DIMMs were being slowed to 667MHz for no reason other than there was a bug in the maximum frequency detection code for the MCH. Change-Id: Id6c6c88c4a40631f6caf52f536a939a43cb3faf1 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15257 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-06-04nb/intel/x4x: Fix unpopulated valueDamien Zammit
Previously, 0x0 was the value being used for an unpopulated dimm on spd[62], however some DDR2 dimms have 0x0 as a valid value. Now use 0xff which is an unused value even on DDR2/DDR3. Change-Id: I55a91a6c3fe3733a7bb2abc45ca352c955c07c99 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15058 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31nb/intel/x4x: Add DMI/EP initDamien Zammit
The values were obtained from vendor bios at runtime. I am not 100% sure of the sequence required to initiate them, but guessed from the gm45 code. There may be some status bytes needed to be polled during the sequence that is missing, but as I don't have bios writer's datasheet it's very hard for me to know. Change-Id: Idd205e0bab5f75e01c6e3a5dc320c08639f52db8 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14925 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10Kconfig: Move defaults for CBFS_SIZEMartin Roth
We want the question for CBFS size to be next to the rom size in the mainboard directory, but that doesn't seem to work for how people want to set the defaults. Instead of having the list of exceptions to the size, just set the defaults at the end of kconfig. - Move the defaults for chipsets not setting HAVE_INTEL_FIRMWARE into the chipset Kconfigs (gm45, nehalem, sandybridge, x4x) - Override the default for HAVE_INTEL_FIRMWARE on skylake. - Move the HAVE_INTEL_FIRMWARE default setting into the firmware Kconfig file - Move the location of the default CBFS_SIZE=ROM_SIZE to the end of the top level kconfig file, while leaving the question where it is. Test=rebuild Kconfig files before and after the change, verify that they are how they were intended to be. Note: the Skylake boards actually changed value, because they were picking up the 0x100000 from HAVE_INTEL_FIRMWARE instead of the 0x200000 desired. This was due to the SOC_INTEL_SKYLAKE being after the HAVE_INTEL_FIRMWARE default. Affected boards were: Google chell, glados, & lars and Intel kunimitsu. Change-Id: I2963a7a7eab037955558d401f5573533674a664f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13645 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-01-29nb/intel/x4x: Move to early cbmemDamien Zammit
Previously with errors in the ram init, early cbmem was disabled. Now that the ram is working correctly, set as early cbmem platform and update all (1) boards to use it. Tested on GA-G41M-ES2L Change-Id: I5925c28821537f0e326b4f5a2ac39778e4724a3c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13131 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29nb/intel/x4x: Cleanup gma.cDamien Zammit
Tidy up the code and move vga_textmode_init() later Change-Id: I49967e7197416c955ae6c8775eac7d1a60c92d1c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13128 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29nb/intel/x4x: Tidy up raminit and fix msbpos() functionDamien Zammit
- Fix bug with msbpos, it was not returning the correct result due to typo in logic, and unsigned value needed to be negative. - Add reclaim above 4GiB - Fix to ME related registers near the end of raminit Change-Id: I04acd0593a457437ee4a42e14b287b2b17a160af Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13127 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-29nb/intel/x4x: Tidy up northbridgeDamien Zammit
- Add device enable macros - Set the PMBASE correctly through southbridge device Change-Id: I1b8cc3de96b1ecaf01e31bad8fba1fada8671c2d Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13126 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29nb/intel/x4x: Fix memory hole with both channels populatedDamien Zammit
Previously, 0xa0000000 to 0xc0000000 needed to be reserved as a non-usable memory hole because it would hang on memory i/o. Memtest86+ now passes with no errors on both channels populated. Tested on GA-G41M-ES2L with 2x2GiB sticks of ram. Change-Id: Ib52a63a80f5f69c16841f10ddb896ab3c7d30462 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13125 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-01-13northbridge/intel/x4x: clean up includesMartin Roth
- Don't redefine D0F0_PCIEXBAR_LO, use the #define in x4x.h - Move TPMBASE and TPM32() definitions into iomap.h - Use "" style include for x4x.h in nortbridge files. - Move includes of .h files out of x4x.h and into the c files that need them. - Protect function definitions in bootblock. Change-Id: I3fdb579235c5446733a0ffba05fffe1a73381251 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12849 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-30northbridge/intel/x4x: Native raminitDamien Zammit
Passes memtest86+ with either one or two sticks of 2GB ram but memory map needs a hole at 0xa0000000 to 0xc0000000 Change-Id: Ib34d862cb48b49c054a505fffcba1c17aeb39436 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/11307 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-29northbridge/intel/x4x: Intel 4-series northbridge supportDamien Zammit
Boots to console on Gigabyte GA-G41M-ES2L Ram initialization *not* included in this patch VGA native init works on analog connector Change-Id: I5262f73fd03d5e5c12e9f11d027bdfbbf0ddde82 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/11305 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>