summaryrefslogtreecommitdiff
path: root/src/northbridge/intel/i945
AgeCommit message (Collapse)Author
2017-10-13nb/intel/*/gma: Port ACPI opregion to older platformsPatrick Rudolph
Port the ACPI opregion implementation that resides in drivers/intel/gma to older platforms. It allows to include a vbt.bin and allows GNU/Linux to load the opregion as ASLS is being set. Windows' Intel will likely ignore it as it relies on legacy VBIOS to be loaded at 0xc0000. Tested successfully on DG43GT (x4x) with vbt.bin, with X200 (gm45) with vendor option rom and D945GCLF (i945) with fake vbt. Change-Id: I1896411155592b343e48cbd116e2f70fb0dbfafa Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-25nb/i945/raminit: Don't fall back to smbus read on failed SPD decodeArthur Heymans
SPD decoding problems are no longer a good method for detecting if i2c byte read failed, since the return value of i2c_block_read is checked. Change-Id: I230aa22964c452cf28a9370c927b82c57e39cc62 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-22nb/intel/i945: Add space after comma in log messagePaul Menzel
Change-Id: If6cf47e4a87cf008d51f65fd1c1c79392c4b2786 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/21619 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-20nb/i945/raminit: Use common ddr2 decode functionsArthur Heymans
This simplifies computing dram timings a lot. This removes computation of rank size based on columns, rows, banks,... and uses the information in SPD byte 31. The result of this is that dimms with multiple asymmetric ranks are not supported anymore. These however are very rare and most likely never tested on this platform. This also uses i2c block read instead of byte read to speed up the raminit. The result is less time is being spend reading SPDs. It still keeps smbus read byte as a backup if i2c block read were to fail. Change-Id: I97c93939d11807752797785dd88c70b43a236ee3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-20nb/intel/i945/early_init.c: Replace numbers with macrosElyes HAOUAS
Change-Id: I270d17a2eff2c6664bf936425a6ed344be3feabe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/21524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-13nb/intel/i945/raminit.c: Replace numbers with macrosElyes HAOUAS
Use macro instead of numbers Change-Id: Ife1aff0a5cf311881b3a11533b71a74c518a633f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/21472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-10nb/intel/i945: Clear timeout bits after disabling watchdogNico Huber
Even with the watchdog disabled, these bits influence other hardware blocks (e.g. SECOND_TO_STS stops SMBus block transfers, possibly yet before they started). Change-Id: If9f93fcc96827bb192148a80b4476796c9358a7a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-06nb/intel/i945/raminit.c: Refactor tRD selectionArthur Heymans
Inspired by gm45 code, which sets this value the same way. Some values for tRD on 800 and 1067MHz FSB were set wrong because the CAS/Freq selection was wrong. CAS was often selected to low and when fixing CAS this results in tRD being too high, due to an incorrect lookup table which caused instability. PASSED memtest86+ during 10h+ on 1067MHZ fsb with 667MHz ddr2, CAS 5 on GA-945GCM-S2L. Change-Id: I8002daf25b7603131b78b01075f43fd23747dd94 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-07nb/intel/*/gma.c: Use macros for GMBUS numbersArthur Heymans
Change-Id: I885b6bd9f5be6b4e3696a530016123a3e81c4b10 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-01nb/intel/i945/gma.c: Remove redefined "DISPPLANE_BGRX888"Elyes HAOUAS
DISPPLANE_BGRX888 defined in drivers/intel/gma/i915_reg.h included in i915.h file Change-Id: I4e9414f39a29e4eac7e325672ce6520a5654d3bc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-07-01nb/intel/i945/gma.c: Add whitespace around '<<'Elyes HAOUAS
Change-Id: Ic01bbae9acaabaade777db52825aa80d25fc5961 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-06-27nb/intel: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Some of these can be changed from #if to if(), but that will happen in a follow-on commmit. Change-Id: Id5bc8b75b1fa372f31982b8636f1efa4975b61a5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-04Kconfig: Add choice of framebuffer modeNico Huber
Rename `FRAMEBUFFER_KEEP_VESA_MODE` to `LINEAR_FRAMEBUFFER` and put it together with new `VGA_TEXT_FRAMEBUFFER` into a choice. There are two versions of `LINEAR_FRAMEBUFFER` that differ only in the prompt and help text (one for `HAVE_VBE_LINEAR_FRAMEBUFFER` and one for `HAVE_LINEAR_FRAMEBUFFER`). Due to `kconfig_lint` we have to model that with additional symbols. Change-Id: I9144351491a14d9bb5e650c14933b646bc83fab0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers that support a linear framebuffer. Some related settings moved to the drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are hardcoded. Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02Kconfig: Rework MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFGNico Huber
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER. * Let drivers select it if they are in charge. * Don't select it on the mainboard level if a driver handles it. Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-11nb/intel/i945: Define and use a default MMCONF_BASE_ADDRESSArthur Heymans
Change-Id: I15550b1cc1a7ccfecba68a46ab2acaee820575b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-14nb/intel/i945: Fix PEG port on 945gcArthur Heymans
Vendor BIOS leaves UPMC1 untouched (on 945gc the default is 0x0203). Not running PCIEx16 init which is valid for 945gm seems to fix all issues and instabilities related to the PEG port. According to lspci the link width is at the desired x16. It is unknown if devices requesting a lower width work automatically or need more configuration. What happens is that IGD gets disabled by the disable function in gma.c when an external GPU is found unless CONFIG_ONBOARD_VGA_IS_PRIMARY is set. Setting IGD as secondary makes Linux (4.10) hang, so this behavior is a requirement for now. TESTED on P5GC-MX with a discrete GPU and both CONFIG_ONBOARD_VGA_IS_PRIMARY set and unset. Change-Id: I6da8aa7714073f4b34df5ae3c1eb4c19e27ddc97 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18549 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-07nb/intel/i945: Move INTEL_EDIDPatrick Rudolph
All boards select INTEL_EDID, move it to nb folder. Change-Id: I35f075a87f2d841856b208f9440cf41af6a3c8e6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19086 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-24nb/intel/i945: Fix SPD dumpsPaul Menzel
Currently the `break` further down is called unconditionally as the brackets for the body of the if statement are missing. Add those. Change-Id: I34917a9877dcc882d880dedea689e1d72fe52888 Found-by: Coverity (CID 1372941: Control flow issues (UNREACHABLE)) Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/18971 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-22nb/intel/i945: Fix errors found by checkpatch.plArthur Heymans
Change-Id: Ic2dd40e73d4a4c091c5ce1f49bbf9ab4d013d7af Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18704 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-18nb/i945/gma.c: Refactor panel setupArthur Heymans
This reuses some of gm45 code to set up the panel. Panel start and stop delays and pwm frequency can now be set in devicetree. Linux does not make the difference between 945gm and gm45 for panel delays, so it is safe to assume the semantics of those registers are the same. The core display clock is computed according to "Mobile Intel® 945 Express Chipset Family" Datasheet. This selects Legacy backlight mode since most targets have some smm code that rely on this. This sets the same backlight frequency as vendor bios on Thinkpad X60 and T60. A default of 180Hz is selected for the PWM frequency if it is not defined in the devicetree, this might be annoying for displays that are LED backlit, but is a safe value for CCFL backlit displays. Change-Id: I1c47b68eecc19624ee534598c22da183bc89425d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18141 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-02nb/i945: Clean "Programming DLL Timings" functionElyes HAOUAS
As we drive both channels with the same speed, chan0dll and chan1dll are the same. Change-Id: I7253ea9ea66396c536c82d63c67fecb041681707 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/18472 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2017-03-01nb/intel/i945: Fix sdram_enhanced_addressing_mode for channel1Elyes HAOUAS
Change-Id: I304467353bb9989f0d7e0ad7d1b632081f66b1af Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/18482 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2017-02-22intel/i945: Fix up whitespace and indentationPaul Menzel
Fix up the whitespace issues introduced in commit 39bfc6cb (nb/i945/raminit.c: Fix dll timings on 945GC). Change-Id: I3a4152866226401bc51c7fb1752aab541a4c72b0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/18465 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2017-02-22nb/i945/raminit.c: Fix dll timings on 945GCElyes HAOUAS
Values based on vendor bios. TESTED on ga-945gcm-s2l with 667MHz ddr2. Change-Id: I2160f0ac73776b20e2cc1ff5bf77ebe98d2c2672 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17197 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2017-02-20nb/i945/raminit: sdram_set_channel_mode Test if DIMM slot 3 is populatedElyes HAOUAS
Add a test in case we have a DIMM2 not populated but DIMM3 is. Change-Id: I14f82afe03884740570838e7b2771233356c518d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/18386 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-14nb/i945/gma.c: Remove writes to FIFO Watermark registersArthur Heymans
Those are the result from tracing what linux or the option rom do but are not needed here. TESTED on Thinkpad X60. Change-Id: I4297a78c4ab6a19ef6161778c993fc3f3fb08c7e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18294 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-12nb/i945/gma.c: Change name and type of mmiobase in functions argumentArthur Heymans
Void pointer arithmetics are forbidden in standard C but GCC has an extension that allows it. Change-Id: I43029b2ab2f7709b8e1ba85eb05c31341b8ac16f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18293 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-04drivers/intel/gma/vbt: Add Kconfig symbol for SSC refNico Huber
The selection of the SSC reference frequency for LVDS was based on a completely unrelated clock. The `ssc_freq` flag should be set when the SSC reference runs at a different frequency than the general display reference clock (DREF). For most platforms, there is no choice, i.e. for i945 and gm45 the SSC reference always differs from the display reference clock (i945: 66Mhz SSC vs. 48MHz DREF; gm45: 100MHz SSC vs. 96Mhz DREF), for Nehalem and newer, it's the same frequency for SSC/non-SSC (120MHz). The only, currently supported platform with a choice seems to be Pineview, where the alternative is 100MHz vs. the default 96MHz. Change-Id: I7791754bd366c9fe6832c32eccef4657ba5f309b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18186 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-11nb/i945/raminit.c: Use Makefile.inc instead of '#include rcven.c'Arthur Heymans
Change-Id: Ib86600b687c7002646ca82d5fa52121b6eafcd60 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18087 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-10nb/intel/945gc: Hardcode the integrated graphic frequenciesArthur Heymans
The code to set the igd frequencies is written with the mobile version of the 945 chipset in mind and seems to cause cause strange igd related problems on the desktop versions. Some possible problems are: * on 800MHz fsb CPUs the igd sometimes has artifacts on the screen; * on 800MHz fsb CPU memtest results vary a lot; * since a commit 45e11aa0a5 "Add/Combine Broadwell Chromebooks using variant board scheme" that does not affect this northbridge, the display shows garbage as soon as Linux (4.8) modesets the display. A fix is to hardcode the core display and render clocks to their maximum, potentially also improving graphical performance. Vendor bios on all boards in coreboot with this northbridge have the same value in this PCI config address. TESTED on P5GC-MX (display works fine again in Linux) and user reports of it making GA-945GCM-S2L run more stable. Change-Id: I8b046edbc952631d9b79023e3d385160ff682c24 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17981 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-06nb/intel/*/northbridge.c: Remove #include <device/hypertransport.h>Arthur Heymans
Nothing from that header is used or even declared since CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT is not selected on Intel hardware. Change-Id: I9101eb6ffa6664a2ab45bc0b247279c916266537 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18044 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2017-01-06sb/ich7: Use common/gpio.h to set up GPIOsArthur Heymans
This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-21nb/i945/early_init.c: Add FSB800 and 1067 to Egress Port Virtual ChannelElyes HAOUAS
Values based on vendor bios and suggested by Arthur Heymans for FSB1067. FSB1067: The ratio 1067/800 is proportional to the ratio of EPBAR32(0x2c) bits: 0x1a / 0x14 ~ 1067/800 EPVC1IST: The ratio is also proportional to FSB ratios: 0x9c / 0xf0 ~ 533/800. Change-Id: Ib90e8ea1b82f2fcc3b5c199cace32a7f0aff4b5c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17198 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-12-11nb/intel/i945: Make pci_mmio_size a devicetree parameterArthur Heymans
Instead of hardcoding pci_mmio_size in the raminit code, this makes it a parameter in the devicetree. A safe minimum of 768M is also defined since using anything less causes problems (if 4G of ram is used). Change-Id: If004c861464162d5dbbc61836a3a205d1619dfd5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16856 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-11intel i945 gm45 x4x: Switch to RELOCATABLE_RAMSTAGEKyösti Mälkki
Change-Id: I2085fc3a17d32cfbdab9ec0b7afbc01031e75b47 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17785 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11intel/i945: Use romstage_handoff for S3Kyösti Mälkki
Don't use scratchpad registers when we have romstage_handoff to pass S3 resume flag. Scratchpad register was read too late in ramstage so acpi_is_wakeup_s3() did not evaluate correctly. This fixes low memory corruption at 0x1000-0x102c and the lack of coreboot tables (util/cbmem not working) after S3 resume. This also fixes console log from reporting early in ramstage "Normal boot" while on "S3 resume" path. Change-Id: I2922a15a90d2f8272c3482579bdd96f8f33e9705 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17675 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11intel i945 gm45 x4x post-car: Use postcar_frame for MTRR setupKyösti Mälkki
Adapt implementation from skylake to prepare for removal of HIGH_MEMORY_SAVE and moving on to RELOCATABLE_RAMSTAGE. With this change, CBMEM region is set early-on as WRBACK with MTRRs and romstage ram stack is moved to CBMEM. Change-Id: Idee5072fd499aa3815b0d78f54308c273e756fd1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15791 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11intel i945 gm45 x4x: Apply cbmem_top() alignmentKyösti Mälkki
Force modest 4 MiB alignment to help with MTRR assignment. Change-Id: I49a7d1288bc079da1b8bd52150ddcfcfe2e51179 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17780 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Drop redundant loggingKyösti Mälkki
Resource is actually stored even before read_resources, but that's where we currently log this resource. For Intel, use PCI config register offset as the resource index, while AMD side uses MSR address. Change-Id: I6eeef1883c5d1ee5bbcebd1731c0e356af3fd781 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17696 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Consolidate resource registrationKyösti Mälkki
Change-Id: Id727270bff9e0288747d178c00f3d747fe223b0f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17695 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-03nb/i945/raminit.h: Fix fsb_frequency's commentElyes HAOUAS
Change-Id: Ie1c28b73bd2d34070173838d341cc6b8f65f50ef Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17686 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-29nb/intel/i945/gma: Declare count variable outside 'for' loopPaul Menzel
Building an image for the Lenovo X60 on Debian 8.5 (jessie) with GCC 4.9.2, compilation fails with the error below. ``` $ gcc --version gcc (Debian 4.9.2-10) 4.9.2 […] $ make # lenovo/x60 with native graphics initialization […] CC ramstage/northbridge/intel/i945/gma.o src/northbridge/intel/i945/gma.c: In function 'probe_edid': src/northbridge/intel/i945/gma.c:570:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode for (int i = 0; i < 8; i++) { ^ src/northbridge/intel/i945/gma.c:570:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code Makefile:316: recipe for target 'build/ramstage/northbridge/intel/i945/gma.o' failed make: *** [build/ramstage/northbridge/intel/i945/gma.o] Error 1 ``` Fix this by declaring the count variable outside the 'for' loop. Change-Id: Icf69337ee46c86bafc4e1320fd99f8f8f5155bfe Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17623 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-21nb/intel: Fix some spelling mistakes in comments and stringsMartin Roth
Change-Id: I4a8297397d878e38516c8df19dd311c7ef19ec06 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17478 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-11intel post-car: Separate files for setup_stack_and_mtrrs()Kyösti Mälkki
Have a common romstage.c file to prepare CAR stack guards. MTRR setup around cbmem_top() is somewhat northbridge specific, place stubs under northbridge for platrform that will move to RELOCATABLE_RAMSTAGE. Change-Id: I3d4fe4145894e83e5980dc2a7bbb8a91acecb3c6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15762 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-09nb/intel/i945/early_init.c: Add DDR2-667 detection for 945GCElyes HAOUAS
945G-M4 returns : "unknown max. RAM clock (2)", however, it supports up to DDR2-667MHz. i945/raminit.c sdram_capabilities_max_supported_memory_frequency() function returns 667 for case 2. Change-Id: I3d54c88af897a71db757d00288f3968ed2c19151 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17191 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-02nb/intel/i945/early_init.c: Use "IS_ENABLED(CONFIG_ ....)"Elyes HAOUAS
Change-Id: I230b5425ac9e916a5ee10a49eeaf5d6d44fd49e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17192 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02nb/i945/gma.c: use an if else statement for use of native initArthur Heymans
Change-Id: I1e964ed939ca5282008253e3fbdd1d2fa5cbf278 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17076 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-02nb/i945/gma.c: Do not try to load vbios when selecting native initArthur Heymans
This fixes a typo introduced in 9c5fc62f: "nb/i945/gma.c: use IS_ENABLED instead of #if, #endif". Change-Id: I2c9ca796767a507483c32867f9b7f172842a1ab3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17075 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-29nb/intel/i945/gma.c: Homogenize code for PCI IDs.Elyes HAOUAS
Change-Id: Ic01565cb730c49a5fe77c8f4990276970964f101 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17174 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-10-26nb/intel/i945: Add PCI id for I945GCNico Huber
Also drop an odd comment about the resource allocator which seems to work fine, with the right id. Change-Id: I9099211fe946c28f90dd7730345b81a3f7f6f545 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17095 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-25nb/i945/gma.c: Set the MSAC register correctlyArthur Heymans
This fixes an instability on 945gc where the IGD completely locks up the system, when for instance tasked to do something with compositing (like GNOME or GDM). TESTED on ga-945gcm-s2l and d945gclf TEST: launch GDM (gnome display manager) Change-Id: Iec49bccf3e3164df9dc1e0b54460a616fe92e04d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17094 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-10-24nb/i945/Kconfig: select the correct VGA_BIOS_ID for 945GCArthur Heymans
Change-Id: I48ae27c5460020b9118e6ade1a3e610b542999c7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17040 Tested-by: build bot (Jenkins) Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-19nb/i945/gma.c: use IS_ENABLED instead of #if, #endifArthur Heymans
Change-Id: Ib58126e1c9001ed679e161d6d06241fac762bdb3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17049 Tested-by: build bot (Jenkins) Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-19nb/i945/raminit: Add fix for clock crossing for 800MHz FSB CPUArthur Heymans
The cross clocking of 800MHz FSB CPU with 667MHz RAM was incorrect. The result is that 800MHz FSB CPUs now properly work with 667MHz RAM. Value taken from vendor bios on ga-945gcm-s2l and suggested by Haouas Elyes. Change-Id: I56c12af50c75a735af0150a4e7bce4faacc93648 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17038 Tested-by: build bot (Jenkins) Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-19nb/i945/raminit: Add fix for 1067MHz FSB CPUsArthur Heymans
Previously the 945gc raminit only worked for 533MHz FSB CPUs. This extends the tRD_Mclks in drt0_table for other FSB speeds. The values are taken from the vendor bios of Gigabyte ga-945gcm-s2l. The result is that 1067MHz FSB CPUs now boot without problems. 800MHz FSB cpus still don't get past romstage. Change-Id: I13a6b97d2e580512155edf66c48405a153121957 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17034 Tested-by: build bot (Jenkins) Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-19nb/i945,gm45,x4x/gma.c: fix unsigned arithmeticsArthur Heymans
This issue was found by Coverity Scan, CID 1364118. Change-Id: Iba3c0f4f952729d9e0987d928b63ef8b8fe8841e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16992 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-10-15nb/i945/gma.c: correct VSYNC end offsetArthur Heymans
According to "G45: Volume 3: Display Register Intel ® 965G Express Chipset Family and Intel ® G35 Express Chipset Graphics Controller" the VSYNC end should start at bit 16. This is also how Linux (at least 4.4) sets this register, which can be seen with intel-gpu-tools. TESTED on Lenovo thinkpad X60 (it does not change anything). Change-Id: Ie222ac13211a91c4fbc580e2bf9de0d973ea9a3a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17015 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-10-12i945/gma.c: Only init LVDS if it is detectedArthur Heymans
Some devices have no LVDS output but if no VGA is connected or no EDID can be found, it will try to init LVDS. This patch detects the presence of an LVDS panel and makes sure that LVDS is not initialized when it is absent. Change-Id: Ie15631514535bab6c881c1f52e9edbfb8aaa5db7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16513 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-11nb/intel/*/graphic_init: use sizeof instead of hardcoding edid sizeArthur Heymans
Change-Id: I2b8c4ef75cca9f9d5251789cda4187a02076b69d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16964 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-11i945/raminit.c: correctly write CLKCFG for 945GCArthur Heymans
MHCBAR(CLKCFG) was previously incorrectly written by the sdram_program_memory_frequency function which required falsely limiting the max dram frequency for 945GC. TESTED on Intel d945gclf (memclock 667 and fsb 533) and Gigabyte ga-945gcm-s2l (memclock 667 and fsb 1067) Change-Id: I520efd69fa09fc9fde87c5301fd81121fde6a700 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16940 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2016-10-10intel/i945: Use "IS_ENABLED" for fsbclk & memclkElyes HAOUAS
Change-Id: I3213a8664955239b10bcf1784ce1ba5e0d95688b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16958 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-10-04src/northbridge: Remove unnecessary whitespaceElyes HAOUAS
Change-Id: Ib06ecd083f00c74f1d227368811729d2944dd1ef Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16851 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-30mb/intel/d945gclf: Allow use of native graphic initArthur Heymans
Add PCI device id to native graphic init and add the Native graphic init option in Kconfig. Change-Id: I136122daef70547830bcc87f568406be7162461f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16512 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-30i945/gma.c: add native VGA initArthur Heymans
This reuses the Intel Pineview native graphic initialization to have output on the VGA connector of i945 devices. The behavior is the same as with the vendor VBIOS BLOB. It uses the external VGA display if it is connected. Change-Id: I7eaee87d16df2e5c9ebeaaff01d36ec1aa4ea495 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16511 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-30i945/gma.c: use linux code to calculate divisorsArthur Heymans
The code to compute n, m1, m2, p1 divisors is not correct in coreboot and on some targets hits a working mode at lower refresh rate, which is why display is working on some targets. The divisors must be such "refclk * (5 * (m1 + 2) + (m2 + 2))/ (n + 2) / (p1 * p2)" is as close as possible to the target frequency (which is defined by the resolution and refresh rate). This patch also fixes the reference frequency. This patch reuses linux (4.1) code from drivers/gpu/drm/i915/intel_display.c to correctly compute divisors. The result is that some previously not working displays, like many displays found on the Lenovo T60 might work now. Some examples of T60 displays that were known to not work (in payload): Samsung LTN141XA-L01 (14.1" 1024x768) LG-Philips LP150X09 (15.1" 1024x768) IDtech N150U3-L01 (15.1" 1600x1200) IDtech IAQX10N (15.1" 2048x1536) Samsung LTN154X3-L0A (15.4" 1280x800) LG-Philips LP150E06-A5K4 (15.1" 1400x1050) Tested on T60 with 1024x786. Change-Id: I2c7f3bb0024ac005029eaebe3ecdc70c38ac777e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16504 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-27i945/gma.c: Generate fake VBTArthur Heymans
This generates a fake VBT for the Intel i945 graphic device. i945 supports both the mobile chipset 945gm (calistoga) and the desktop chipset 945gc (lakeport), which is why a VBT with a different id string needs to be created for each target. The VBT id string is obtained from the vbios blob in the following way: "strings vbios.bin | grep VBT". Change-Id: I8245b12b16a4426efbe1f584d4163fc257231a98 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16530 Tested-by: build bot (Jenkins) Reviewed-by: Damien Zammit <damien@zamaudio.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-20northbridge/intel/i945: Add space around operatorsElyes HAOUAS
Change-Id: I24505af163544a03e3eab72c24f25fcdc4b1b16c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16624 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-13i945.h: fix #include pathAntonello Dettori
Fix the #include path. Change-Id: Ifefb2faef6e4fc87152acb21c37dd87e7c14645c Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16294 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-12src/northbridge: Improve code formattingElyes HAOUAS
Change-Id: Iffa058d9eb1e96a4d1587dc3f8a1740907ffbb32 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16414 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-04northbridge/intel/i945: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/intel/i945. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: I041c150a7b50261e26955ad9287ef05b9a06e412 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16371 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31northbridge/intel: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I53208ce5db06d2c65f954e6d59222924ab87722e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16304 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31i945: Enable changing VRAM sizeArthur Heymans
On i945 the vram size is the default 8mb. It is also possible to set it 1mb or 0mb hardcoding the GGC register in early_init.c The intel documentation on i945, "Mobile Intel® 945 Express Chipset Family datasheet june 2008" only documents those three options. They are set using 3 bits. The documententation also makes mention of 4mb, 16mb, 32mb, 48mb, 64mb but not how to set it. The other non documented (straight forward) bit combinations allow to change the VRAM size to those other states. What this patch does is: - add those undocumented registers with their respective vram size to the i945 NB code; - make this a cmos option on targets that have this northbridge. TEST: build, flash to target, set cmos as desired and boot linux. On Debian it can be found using "dmesg | grep stolen". NOTE: dmesg message about reserved vram are quite different depending on linux version Change-Id: Ia71367ae3efb51bd64affd728407b8386e74594f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/14819 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23src/northbridge: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I6a533667c7c8ff5ec6ab9d4e1cfc51e993a90084 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16280 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-07-31src/northbridge: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: I5aa27f06f82a8309afb6e06c9e462e5792aa9986 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15940 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-26intel/i945: Use common ACPI S3 recoveryKyösti Mälkki
Change-Id: I6f0cdc80870fddeaada3191e493bd85fdefee07f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-17Move definitions of HIGH_MEMORY_SAVEKyösti Mälkki
This is more of ACPI S3 resume and x86 definition than CBMEM. Change-Id: Iffbfb2e30ab5ea0b736e5626f51c86c7452f3129 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15190 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-11northbridge/i945/gma: Re-enable NVRAM tft_brightnessAlexander Couzens
Commit 71512b2c (northbridge/i945/gma: fix build error with native graphics init) unintentionally changed the code to ignore the NVRAM setting `tft_brightness`. Revert that hunk to restore the original behavior. Change-Id: Iffdfc5272732bad3476f35ddac1f5a7564270531 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14002 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-28northbridge/intel: add missing #include guardsIru Cai
I first found the missing of #include guards when I tried to include both sandybridge/gma.h and sandybridge/sandybridge.h, but sandybridge.h includes gma.h in it and gives a compile error. Change-Id: I13fdb8014b82e6065be2064137b7ea10062deaca Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/13775 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23Intel: Move MCRS ResourceTemplate outside of _CRS methodMartin Roth
On Broadwell, this reduces the number of 'remarks' in the IASL build from 222 to 3. Fixes these remarks: Object is not referenced (Name is within method [_CRS]) The ACPI compiler is trying to be helpful in letting us know that we're not using various fields in the MCRS ResourceTemplate when we define it inside of the _CRS method. Since we're not intending to use those objects in the method, it shouldn't be an issue, but the warning is annoying and can mask real issues. Moving the creation of the MCRS object to outside of the CRS method and referencing it from there solves this problem. This change was made for fsp_baytrail in commit 2eaa0d49 fsp_baytrail: Fix ACPI 'Object is not referenced' warnings Change-Id: I67a1faf963d1868f4133c7747a43a511cd28a44b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11268 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-12gma: Consolidate Intel IGD ACPI code some moreNico Huber
Consolidate some common (and mostly broken) code. Will try to fix things in separate commits. Maybe, igd.asl taken from gm45 (the non-PCH case) could also be used for i945 and sch. But this needs further investigation. Change-Id: Id3663bf588458e1e71920b96a3149f96947921e9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11702 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2015-10-11Derive lvds_dual_channel from EDID timings.Vladimir Serbinenko
Based on the info by Felix Held. Change-Id: Iab84dd8a0e3c942da20a6e21db5510e4ad16cadd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11857 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-09-07intel i945: Fix native VGA initializationMono
Native VGA init no longer compiles from commit: * 7dbf9c6 edid: Use edid_mode struct to reduce redundancy Tested on a single X60 machine. This patch basically copies 11491 which does the same for north/intel/sandybridge. Change-Id: I0663f3b423624c67c2388a9cc44ec41f370f4a17 Signed-off-by: Axel Holewa <mono-for-coreboot@donderklumpen.de> Reviewed-on: http://review.coreboot.org/11585 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-08-10intel/i945: don't read structs out of uninitialized pointersPatrick Georgi
Change-Id: I7f17cd1418f05ff3e8cd559eca6ec3ce7f9bfb79 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11139 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9598 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05lib: Unify log2() and related functionsJulius Werner
This patch adds a few bit counting functions that are commonly needed for certain register calculations. We previously had a log2() implementation already, but it was awkwardly split between some C code that's only available in ramstage and an optimized x86-specific implementation in pre-RAM that prevented other archs from pulling it into earlier stages. Using __builtin_clz() as the baseline allows GCC to inline optimized assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and to perform constant-folding if possible. What was previously named log2f on pre-RAM x86 is now ffs, since that's the standard name for that operation and I honestly don't have the slightest idea how it could've ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm with Float result, whereas the Find First Set operation has no direct correlation to logarithms that I know of). Make ffs result 0-based instead of the POSIX standard's 1-based since that is consistent with clz, log2 and the former log2f, and generally closer to what you want for most applications (a value that can directly be used as a shift to reach the found bit). Call it __ffs() instead of ffs() to avoid problems when importing code, since that's what Linux uses for the 0-based operation. CQ-DEPEND=CL:273023 BRANCH=None BUG=None TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new log2() and __ffs() results on Falco for a bunch of test values. Change-Id: I599209b342059e17b3130621edb6b6bbeae26876 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273008 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-28igd.asl rewriteVladimir Serbinenko
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
All boards now use per-device ACPI. This patch finishes migration by removing transitional kludges. Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7372 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-16i945: Disable check for 2-dimm support.Vladimir Serbinenko
The check is wrong. On Acer Aspire One it returns 0 despite 2 DIMMs working fine on the same channel if this check is disabled (tested by memtest). On boards that have only 1 DIMM per channel, the code will simply find no SPD and skip empty slot. Change-Id: I5f2fdcd1d948ebf3eabebaea4441af4c19e47f8f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7568 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-04-30i945/gma: Fix wrong comment about the documentation.Denis 'GNUtoo' Carikli
The GTT location is documented in the "309219" datasheet. For instance it can be found in the TOLUD register description. The 309219 datasheet is for the "Mobile Intel® 945 Express Chipset Family". It was published in 2008. Change-Id: I75ac095ebc577e031af566963ebffe9ed2587c96 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/9622 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-29kbuild: automatically include northbridgesStefan Reinauer
This change switches all northbridge vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in northbridge/Makefile.inc or in northbridge/<vendor>/Makefile.inc. This means, vendor and northbridge directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: I8468154dbfaaaffcba9fda27ba2d7b9049ad5c19 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9800 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-16northbridge/i945/gma: fix build error with native graphics initFrancis Rowe
Tested on an X60, Native graphics init still works perfectly. Change-Id: I91be3baa658e0332028c512c5a4cb0aee07d540a Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/8696 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 20:35:41 +0000