aboutsummaryrefslogtreecommitdiff
path: root/src/northbridge/amd
AgeCommit message (Expand)Author
2015-11-11northbridge/amd/amdfam10: Add ability to set maximum P-state limitTimothy Pearson
2015-11-11northbridge/amd/amdmct: Skip DCT config write to Flash if unchangedTimothy Pearson
2015-11-11cpu/amd: Add CC6 supportTimothy Pearson
2015-11-11mainboard/asus/kgpe-d16: Enable CC6Timothy Pearson
2015-11-11northbridge/amd/amdfam10: Enable CC6 DRAM save area setupTimothy Pearson
2015-11-11amd/amdmct/mct_ddr3: Use training values from previous boot if possibleTimothy Pearson
2015-11-11amd/amdmct/mct_ddr3: Improve SPD DIMM detect reliabilityTimothy Pearson
2015-11-10northbridge/amd/amdmct/mct_ddr3: Clean up curly brace style violationsTimothy Pearson
2015-11-10northbridge/amd/amdmct: Read SPD data into cache to decrease bootup timeTimothy Pearson
2015-11-09AMD binaryPI: Allow fine-tuning platform memory configurationKyösti Mälkki
2015-11-08amdmct/mct_ddr3: Disable Fam10h-specific MTRR setup on Fam15hTimothy Pearson
2015-11-06amd/00730F01: Add missing headerfileKyösti Mälkki
2015-11-06AMD binaryPI BiosCallouts: Remove castKyösti Mälkki
2015-11-06AGESA BiosCallouts: Remove castKyösti Mälkki
2015-11-06amd/00660F01: Fix MMCONF resourceKyösti Mälkki
2015-11-06amd/00730F01: Fix MMCONF resourceKyösti Mälkki
2015-11-06AMD bettong: Fix the interrupt routing.zbao
2015-11-05src/amd: Increase maximum blootblock execution countTimothy Pearson
2015-11-02cpu/amd: Add initial AMD Family 15h supportTimothy Pearson
2015-11-02cpu/amd: Move model_10xxx to family_10h-family_15hTimothy Pearson
2015-11-02northbridge/amd/amdmct/mct_ddr3: Fix S3 suspend overrunning the stack size limitTimothy Pearson
2015-11-02northbridge/amd/amdfam10: Set DIMM voltage based on SPD dataTimothy Pearson
2015-10-31northbridge/amd/amdfam10: Correct S3_DATA_POS type from int to hexTimothy Pearson
2015-10-31northbridge/amd/amdfam10: Update RAM speed table with DDR3 valuesTimothy Pearson
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
2015-10-30AMD mainboards: Fix 64bit BiosCallOuts.cStefan Reinauer
2015-10-30cpu/amd: Fix cbtypes.h to match UINTN conventionStefan Reinauer
2015-10-30RD890: 64bit fixesStefan Reinauer
2015-10-30northbridge/amd/amdmct/mct_ddr3: Add initial Suspend to RAM (S3) supportTimothy Pearson
2015-10-30northbridge/amd/amdfam10: Add Suspend to RAM (S3) Flash data storage areaTimothy Pearson
2015-10-30Port AGESA based northbridge code to 64bitStefan Reinauer
2015-10-29northbridge/amd/amdk8: Improve DIMM detection debuggingTimothy Pearson
2015-10-27northbridge/amd/amdfam10: Limit maximum RAM clock to BKDG recommendationsTimothy Pearson
2015-10-26northbridge/amd/amdmct: Fix broken AMD K10 DDR3 memory initalizationTimothy Pearson
2015-10-25AMD Family 0Fh: ensure CONFIG_CBB and CONFIG_CDB have sane valuesJonathan A. Kollasch
2015-10-25northbridge/amd/amdfam10: Enable advanced PCIe setup optionsTimothy Pearson
2015-10-24cpu/amd: Add initial support for AMD Socket G34 processorsTimothy Pearson
2015-10-23northbridge/amd/amdmct: Fix Family 15h detectionTimothy Pearson
2015-10-23northbridge/amd/amdmct/mct_ddr3: Fix curly brace style violationsTimothy Pearson
2015-10-23northbridge/amd/amdfam10: Fix typo in commentTimothy Pearson
2015-10-15cpu/mtrr.h: Fix macro names for MTRR registersAlexandru Gagniuc
2015-09-30amd/family14: Add k10temp thermal zone.Tobias Diedrich
2015-09-14AGESA S3 support: Fix excessive stack usageKyösti Mälkki
2015-09-07northbridge/amd/amdfam10: Use adequate size for HT speed limit fieldTimothy Pearson
2015-08-31AMD Bettong: Lower the TOM to give more MMIO spacezbao
2015-08-30Kconfig: Remove EXPERT modeAlexandru Gagniuc
2015-08-18northbridge/amd/amdfam10: Redirect legacy VGA memory access to MMIOTimothy Pearson
2015-08-13amd: raminit sysinfo offset fixAaron Durbin
2015-08-09AMD K8: Avoid duplicate variables in SSDT on multisocket systemsJonathan A. Kollasch
2015-07-21Port Fam14 northbridge code to 64bitStefan Reinauer
2015-07-21Revert "northbridge/amd/pi: Add support for memory settings"Marc Jones
2015-07-20northbridge/amd/pi: Add support for memory settingsDave Frodin
2015-07-14amd/fam10: Add k10temp ACPI thermal zone mixin.Tobias Diedrich
2015-07-07northbridge/amd/amdfam10: Remove array to null comparisonTimothy Pearson
2015-06-23AMD PI agesawrapper: add PSPP (PCIe Speed Power Policy) interfaceWANG Siyuan
2015-06-23Move same Kconfigs to northbridge/amd/pi/KconfigWANG Siyuan
2015-06-22AMD Merlin Falcon: Add northbridge files for new AMD processorWANG Siyuan
2015-06-22AMD OemS3Save: refactor for Merlin FalconWANG Siyuan
2015-06-13Move remap_bsp_lapic to AMD specific codeStefan Reinauer
2015-06-10PCI subsystem: Drop PCI_64BIT_PREF_MEM optionKyösti Mälkki
2015-06-10northbridge/amd/amdfam10: Increase MMIO hole size to 1GBTimothy Pearson
2015-06-10northbridge/amd/amdmct: Honor MMCONF_BASE_ADDRESSTimothy Pearson
2015-06-08Remove empty lines at end of fileElyes HAOUAS
2015-06-05device_ops: add device_t argument to write_acpi_tablesAlexander Couzens
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
2015-06-05lib: Unify log2() and related functionsJulius Werner
2015-06-05AMD K8 fam10: Use parent subordinate to track HT enumerationKyösti Mälkki
2015-06-05AMD K8 fam10: Drop extra HT scan_chain() parametersKyösti Mälkki
2015-06-05AMD K8 fam10: Drop local is_sblink in scan_chainsKyösti Mälkki
2015-06-05AMD K8 fam10: Drop redundant parameters on scan_chain()Kyösti Mälkki
2015-06-05AMD K8 fam10: Refactor HT link connection testKyösti Mälkki
2015-06-05AMD K8 fam10: Always have SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
2015-06-05AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
2015-06-05AMD K8 fam10: Relocate SB_HT_CHAIN in devicetreeKyösti Mälkki
2015-06-05AMD K8: Move SB_HT_CHAIN_ON_BUS0 default 0Kyösti Mälkki
2015-06-05AMD K8 fam10: Refactor logic around SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
2015-06-05AMD K8: Refactor calls for HT configurationKyösti Mälkki
2015-06-05AMD fam10: Refactor calls for HT configurationKyösti Mälkki
2015-06-05AMD K8 fam10: Eliminate local variable min_busKyösti Mälkki
2015-06-05AMD K8 fam10: Fix preprocessor use with SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
2015-06-05AMD K8 fam10: Eliminate local variables busn and max_busKyösti Mälkki
2015-06-05AMD K8 fam10: Add ht_route_link()Kyösti Mälkki
2015-06-05AMD fam10: Fix add_more_linksKyösti Mälkki
2015-06-04devicetree: Change scan_bus() prototype in device opsKyösti Mälkki
2015-06-04PCI subsystem: Drop parameter max from scan_busKyösti Mälkki
2015-06-04devicetree: Rename unused parameter max in domain_scan_bus()Kyösti Mälkki
2015-06-04devicetree: Rename unused parameter to passthruKyösti Mälkki
2015-06-04HyperTransport: Use subordinate property to track chain enumerationKyösti Mälkki
2015-06-04HyperTransport: Move pci_scan_bus() callKyösti Mälkki
2015-06-02cbfs: new API and better program loadingAaron Durbin
2015-05-27AGESA: Reduce SPI use by 24kB for S3 supportKyösti Mälkki
2015-05-27AGESA: Separate HeapManager declarations from BiosCallOutsKyösti Mälkki
2015-05-27AGESA: Split S3 backup in CBMEMKyösti Mälkki
2015-05-26Make acpi_fill_hest into parameterVladimir Serbinenko
2015-05-26AGESA: Refactor OEM S3 storageKyösti Mälkki
2015-05-26AGESA: Move S3 related SPI writes againKyösti Mälkki
2015-05-26AGESA f16kb: Fix PCI device notationFabian Kunkel
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
2015-05-23AGESA: Drop DIMM_SUPPORT, _DDR3 and _REGISTEREDKyösti Mälkki
2015-05-21Remove address from GPLv2 headersPatrick Georgi
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-20 03:26:00 +0000