summaryrefslogtreecommitdiff
path: root/src/northbridge/amd
AgeCommit message (Collapse)Author
2016-06-04AGESA: Fix invalid use of CFG_ declarationsKyösti Mälkki
The declarations of CFG_ evaluate to correct values only when included after the definitions of BLDCFG_ in buildOpts.c. So we never have CFG_PLAT_NUM_IO_APICS defined here. Change-Id: I94b3dee5a3207b37921eb24a0bcd73b5a217b2d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14887 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09nb/amd/mct_ddr3: Report correct DIMM size in SMBIOS structureTimothy Pearson
The existing DIMM size calculation for DDR3 was incorrect. Use the recommended calculation from the DDR3 SPD specification. Change-Id: Id6a39e2b38b5d9f483341ebef8f2960ae52bda6c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14739 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09nb/amd/mct_ddr3: Add support for non-ECC DIMMs on AMD Family 15hTimothy Pearson
While some stubs existed before this patch to handle non-ECC memory initialization, there were a number of ECC detect unaware sections of code. Add ECC support detection to those sections. Change-Id: I56dad8a0f6833b2f42796212afb9777e9cc73d6d Tested-On: ASUS KGPE-D16 Tested-With: 1x Opteron 6262 Tested-With: 1x SuperTalent 4G non-ECC DIMM in slot A2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14737 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Damien Zammit <damien@zamaudio.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-06amd/gx2 + amd/lx: Fix shift overflow issueStefan Reinauer
gcc 6.1 complains that SMM_OFFSET << 8 is larger than the register it is assigned to (rightly so): src/northbridge/amd/gx2/northbridgeinit.c:196:23: error: result of '1077936128 << 8' requires 40 bits to represent, but 'int' only has 32 bits [-Werror=shift-overflow=] msr.lo = (SMM_OFFSET << 8) & 0xfff00000; ^~ Change-Id: Ib0d669268202d222574abee335a6a65c8a255cc7 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14617 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-02nb/amd/mct_ddr3: Only initialize ECC bits onceTimothy Pearson
The ECC check bits of all ECC DIMMS were inadvertently initialized twice in the same routine, significantly delaying startup. Part of this was related to an obsolete MCA workaround that has been fixed through multiple commits, therefore the workaround is no longer needed. Only initialize the ECC check bits once. Change-Id: I90ac1147d9b006794d29b866a9cb5b7ead8f01e7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14503 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-01nb/amd/mct_ddr3: Warn if MaxRdLatency training fails on Family 15hTimothy Pearson
Change-Id: Idb948acd1a508379f600fbd2fd40fb26b7571d7c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14545 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Stop receiver enable cycle training after window foundTimothy Pearson
During receiver enable cycle training on Family 15h the entire range of possible delays is searched, even though the single passing window is often found nearly immediately. Skip the remainder of the delay range after the passing window has been located. Change-Id: If98217fa8e7de77366762d3c7bb01049a1dc080f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14544 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Do not constantly reset read data timing registers to 0Timothy Pearson
During DQS receiver enable cycle training on Family 15h platforms the read data timing registers were inadvertently set to zero on every lane training attempt. Ensure that the read data timing registers are correctly set after each lane is trained in receiver enable cycle training. This allows more than one RDIMM to function on a given DCT channel. Change-Id: I87d732f0383e9785a73b57e6f48855f3e872f1f9 Tested-On: ASUS KGPE-D16 Tested-With: 1x Opteron 6262HE Tested-With: 4x Crucial 36KSF1G72PZ-1G6M1 (slots A2 / A1 / B2 / B1) Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14543 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Skip nibble training when current DIMM is not x4Timothy Pearson
Change-Id: I1f5b024606093dc81de3f3d69b7a43e20141b709 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14542 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Fix x4 DIMM receiver enable training on Fam15hTimothy Pearson
The existing Family 15h receiver enable training code stored temporary delay values in the wrong variables, leading to the requisite averaging of delays across nibbles not being applied. This in turn made x4 DIMMs less stable than they should have been. Store temporary nibble delay values in a dedicated array. Change-Id: Ic5da898af7d689db4110211f89b886ccdbb5f78f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14541 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-28nb/amd/mct_ddr3: Restart system on training failure instead of using die()Timothy Pearson
DIMM training can sporadically fail due to external influences or various errata. In these cases, restarting to retry training is a more appropriate response than halting the system and requiring manual intervention. Change-Id: Id49f7419f56e0640a84448cc06ecbaf62bed145e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14529 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-26nb/amd/mct_ddr3: Report correct DIMM in MRS setup routinesTimothy Pearson
The wrong DIMM number was used in the initial non-target MRS setup routines. This had no functional impact other than to print the wrong DIMM number in the DDR3 verbose debug output. Change-Id: I480118ed00e1786a06e641a56f0fb19cd87f92eb Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14501 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-26nb/amd/mct_ddr3: Fix a number of minor errors in RDIMM setupTimothy Pearson
The existing RDIMM RC control word send routines were a hodgepodge of various AGESA chunks with different ways of handling the same task. Unify the control word chip select setup, use precise timing routines on Family 15h, fix a couple of incorrect masks, and add additional debugging statements. It is believed that this patch is cosmetic and does not significantly alter existing functionality. Change-Id: Ie4ec7b6a7be7fce09e89f9eec146cc98b15b6160 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14500 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-25nb/amd/mct_ddr3: Scale lane delays for each DIMM after MEMCLK changeTimothy Pearson
When more than one DIMM is installed on a DCT, only the first DIMM delay values are scaled to the new memory clock frequency after a memory clock change during write leveling. Store the previous memory clock of each DIMM during write leveling to ensure that every DIMM has its delay values rescaled. Change-Id: I56e816d3d3256925598219d92783246f5f4ab567 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14479 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22Revert "nb/amd/mct_ddr3: Disable MCE framework during DRAM training"Timothy Pearson
After substantial testing it has been determined that it is neither required nor safe to disable the DRAM MCA during initial startup. This (mostly) reverts commit c094d9961144871c472698c41ce634e58abb6a32. The minor debugging enhancements from that commit were left in place. Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Config-RAM: 1x Kingston 9965516-483.A00LF Change-Id: I58fcc296b8c45ecaedf540951c365e4ce52baaf5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14446 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Enhance debugging around MEMCLK frequency changeTimothy Pearson
Change-Id: I5056cf885b7063a97c095bfaaf01dd8da777a425 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14447 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Fix RDIMM training on certain DIMMsTimothy Pearson
Certain RDIMMs have inherently large write levelling delays, in some cases exceeding 1.5 MEMCLK. When these DIMMs are utilized, the phase recovery system requires special handling due to the resultant offset exceeding the phase recovery reporting capabilities. Fix an old error where delays > 1.5 MEMCLK were not being programmed (gross delay high bit was not in set range), and restore special delay handling for delays greater than 1.5 MEMCLK. Also enhance debugging for x4 DIMMs around the affected code. Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Change-Id: I0fb5454c4d5a9f308cc735597607f095fe9188db Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14441 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Run fence training on each node after memory clock changeTimothy Pearson
The BKDG requires phy fences to be re-trained after a memory clock change. Memory training on the ASUS KGPE-D16 and KCMA-D8 somehow "mostly" worked -- without actually following this requirement -- ! Fix the single typo that caused several weeks of delay in putting servers with Kingston RAM (and others) into production... Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Change-Id: I197e6728d2b0ac8c1535740599459d080b17af33 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14445 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-20AMD CIMX: Drop unused codeKyösti Mälkki
We never define B1_IMAGE or B2_IMAGE. These are about building CIMx as separate binary modules, while coreboot builds these into same romstage or ramstage module. Change-Id: I9cfa3f0bff8332aff4b661d56d0e7b340a992992 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14393 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Kerry Sheh <shekairui@gmail.com>
2016-04-16northbridge/amd/{lx,gx2}: remove immediate accesses of 0Patrick Georgi
gcc doesn't like these because they're undefined behavior, so use zeroptr instead. For the loop that just does a number of writes (0..4), use zeroptr + i. Checked the disassembly (AMD_RUMBA and PCENGINES_ALIX2D) to not contain ud2 anymore and to look reasonable where zeroptr was used. Change-Id: I4a58220ec9a10c465909ca4ecbe5366d0a8cc0df Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14345 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-04-13amd/agesa/family12/dimmSpd.c: Indent (tab) fixEdward O'Callaghan
Trivial; Use tab over space for indent. Clean up some ASCII art while here. Change-Id: Id2478d140a98596c5eeefdf5b047c1ca23203909 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: https://review.coreboot.org/8016 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-11and/nb/mct_ddr3: Pack all structures passed to ramstage and set alignmentTimothy Pearson
Two of the MCT data structures passed as substructures to ramstage were not packed, and additionally no alignment was specified. On at least SP5100-based platforms, specifying packed with no alignment caused boot failure dependent on the exact compiled binary layout (LPC hang). Specifying the alignment and packing the remaining structures appears to have resolved the remaining LPC hang issues on the KGPE-D16. Note that packing the remaining structures alone was not sufficient to eliminate the hang, however removing the packed attribute entirely (during debugging) did resolve the hang at the expense of potential problems in ramstage. Change-Id: If3a7509ed438870d4d05caaaaa091e1c47bf9b97 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14303 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-04-11nb/amd/amdfam10: Write MCT variables to flash after PCI configurationTimothy Pearson
The SPI controller needs to be set up on devices such as the SP5100 before it can be accessed to write MCT backup data. Move the backup data write after PCI configuration has been completed. Change-Id: Ibcf31755242ac058407a422ce8aa33d6b0b293c7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14305 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08Revert "nb/amd/mct_ddr3: Enable DIMM parity when RDIMMs installed"Timothy Pearson
This reverts commit f961becc433bf23fc8744fdfd757f0cdb75c2c62. On studying the BKDG more closely this is not the correct place to enable DIMM parity. Further patches to clarify the parity setup process on Family 15h are forthcoming. Change-Id: I5a3a4f1621e3048f9dfc159709410be9de6ebecd Reviewed-on: https://review.coreboot.org/14271 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/mct_ddr3: Reenable sync flood after ECC initTimothy Pearson
The sync flood reset fix in Change-Id: I62d897010a8120aa14b4cb8d096bc4f2edc5f248 and related changes have made it possible to move the sync flood enable statements back into romstage. Change-Id: I5a3a4f1621e3048f9dfc159709410be9de6ebece Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14270 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/mct_ddr3: Add MCE reporting logicTimothy Pearson
When a fatal error and subsequent sync flood / reset occurs, the MCA status registers may contain valuable information on the cause of the fatal error. Add functions to report MCEs and reset the MCA status registers early in the boot process. Change-Id: Icde1051ac22f93688de1330f5e2c9ce28b14b59a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14265 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/amdfam10: Only flag machine check exception if valid bit is setTimothy Pearson
Change-Id: I42d901ae9445943a863fb3ba9bda5a915f255e02 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14264 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/mct_ddr3: Cache whether ECC is allowed at the platform levelTimothy Pearson
Certain AMD platforms, such as those using the SP5100 southbridge, contain a very poorly documented bug related to LPC ROM access, which is triggered by repeated (hundreds or more) rapid calls to get_option(). This bug manifests as a complete system deadlock in ramstage device configuration, requiring standby power to be removed from the system to release the deadlock. Cache the platform ECC status to avoid repeated calls to get_option() in the lane count detection logic. Change-Id: I8b48c523218ccc8c113319957d6eca2d15e1070f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14273 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-01nb/amd/mct_ddr3: Fix revision mask for DR processorsTimothy Pearson
The revision mask for all DR-* series processors was incorrectly set to only include the DR-B revision mask. Include all DR-* series prcessors in the DR_ALL revision mask. Change-Id: Iceda96aa6267b24abcbf78d39f4848d2be8053b8 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Found-by: Coverity, CID 1229627 (#1 of 1): Logically dead code (DEADCODE) Reviewed-on: https://review.coreboot.org/14216 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-03-31nb/amd_mct_ddr3: Move DRAM MCE sync flood enable to ramstageTimothy Pearson
Enabling sync flood on DRAM MCE directly after ECC clear can lead to a system hang with no way to determine the offending DRAM module. Clear MCEs after ECC setup, but do not enable sync flood until NB setup in ramstage to allow time for any MCEs to accumulate in the status registers. Before enabling sync flood on MCE, determine if any MCEs were logged during ramstage execution and display them on the serial console. Also clear the DRAM ECC sync flood bits during DRAM training and initial ramstage execution. Change-Id: Ibd93801be2eed06d89c8d306c14aef5558dd5a15 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14192 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-31nb/amd/mct_ddr3: Clear early MCEs and report DRAM MCEsTimothy Pearson
During power on from cold (S5) state, numerous MCEs are generated before DRAM training starts, e.g. during HT link training. Clear these MCEs before DRAM training start, and report any MCEs generated during DRAM training. Change-Id: I7d047571242e5bd041e4aac22c1ec1d7d26ef0e6 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14191 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-31nb/amd/mct_ddr3: Disable MCE framework during DRAM trainingTimothy Pearson
On Family 15h processors, with certain RDIMMs, MCEs are generated as a normal part of DCT startup / DRAM training. Disable sync flood on parity or UC data error until ECC has been enabled. Change-Id: Ife54751ff127ffd59baaad35d3fea14ea01ef505 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14186 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30nb/amd/mct_ddr3: Enable DIMM parity when RDIMMs installedTimothy Pearson
This resolves a long-standing issue with RDIMM control word configuration failure, likely due to random parity failure. Change-Id: If8b8dc5b8b99f4c2fe29b3a133b064631e4693be Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14184 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30northbridge/amd/amdfam10: Add family15h model10h-1fh (Trinity)Damien Zammit
Change-Id: I96d695ed10176276116fcf3a2b77605fb3f2d5db Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13710 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-28nb/amd/mct_ddr3: Use standard C function calls in mct_ResetDataStruct_D()Timothy Pearson
Replace open coded memset() functions with calls to the library function. The new code also explicitly backs up and restores the data structures that are preserved across calls to mct_ResetDataStruct_D(), and no longer relies on structure member order to function correctly. Change-Id: I6dd6377deda0087cd1b65f7555588978657d6516 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-26nb/amd/amdmct: Select max_lanes based on ECC presence or absenceDamien Zammit
Change-Id: Ic5482dc13ab7b53ec4df408bbe32d20888ae2e12 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13725 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-24nb/amd/mct_ddr3: Set the NBP0 read latency from P0 trained valuesTimothy Pearson
During maximum read latency training on Family 15h processors, the maximum read latency was incorrectly set from the NBP1 value instead of the correct NBP0 value. Modify maximimum read latency training to explicitly operate on the NBP0 value, and store the previously calculated NBP1 value for reference by other portions of the training algorithm. Change-Id: I5d4a6c2def83df3e23f1a4c598314c31a0172cd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14150 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-03-23nb/amd/mct_ddr3: Remove spurious Addl_Index variable in ↵Timothy Pearson
dqsTrainMaxRdLatency_SW_Fam15() Change-Id: Ic3f636983cf6ba2796ee56e2a25b56513a4343c1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14148 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21nb/amd/amdmct/mct_ddr3: Ensure BlockRxDqsLock does not remain setTimothy Pearson
Under certain conditions (training abort) BlockRxDqsLock could remain set in violation of the BKDG. Ensure BlockRxDqsLock is reset to 0 after a lane training abort. Change-Id: I1a49a24d02b2b7cacae074794ec274a424a9e66b Reviewed-on: https://review.coreboot.org/14144 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13nb/amd/mct_ddr3: Use correct initial UI setting during DRAM trainingTimothy Pearson
Rebasing change I3be808db5d15ceec4c36d17582756b01425df09a did not take into account the default UI setting introduced in change I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 , causing DRAM instability and occassional failure to boot. Use the correct 1UI value for the modified function semantics. Change-Id: I9fd24cf83e4c4083c6e467d49021c98e5f5f2c53 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14073 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12nb/amd/mct_ddr3: Consolidate duplicated codeTimothy Pearson
read_dqs_read_data_timing_registers() and read_read_dqs_timing_control_registers() served essentially the same function but had slightly different semantics, causing confusion and needlessly complex Family15h code. Consolidate both into read_dqs_read_data_timing_registers() and adjust surrounding code to match new semantics. Change-Id: I3be808db5d15ceec4c36d17582756b01425df09a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13994 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Train correct receiver in TrainDQSRdWrPos_D_Fam15Timothy Pearson
Change-Id: Ia26950a8297f0a7125c21e995c89a3fc68d9d8a9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13932 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Consolidate calls to MCT minimum clock setting fetchTimothy Pearson
Change-Id: I4497b0be6ed6c90dbb31e89013feed8ff5ff9071 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13885 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11nb/amd/mct_ddr3: Require minumum training quality for both read and writeTimothy Pearson
The existing MCT code proceeded to the next DRAM training phase if the minimum lane quality standard passed for either the read or write direction. Ensure that both pass for a given set of delay values before proceeding to the next training phase. Change-Id: I2316ca639f58a23cf64bea56290e9422e02edf1c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13993 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Set read DQS delay to 1UI before calculating read latencyTimothy Pearson
The AMD Family 15h BKDG rev. 3.14 indicates that the maximum read latency must be calculated prior to DQS position training, however the read latency calculations use read DQS delay values that have not been set prior to DQS position training. Set the read DQS delay values to 1UI (i.e worst case) before calculating the read latency prior to DQS position training. Change-Id: I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13995 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Properly initialize arrays and add bounds checksTimothy Pearson
A couple of arrays were not properly initialized. This did not appear to affect operation of the codebase however it led to some ugly values being displayed when debugging was turned on. Also bounds check an array index; as before this did not appear to affect operation but was a potential point of failure. Change-Id: I243b7197a74aed78ddca808eb3b0f35f1fe9d95a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13934 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Restore previous DQS delay values on failed loopTimothy Pearson
Change-Id: Iacfcd7f379d09a633973b4c3ef3cbb97e6d1f09f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13931 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-19nb/amd/amdmct: Add socket specific configuration for FM2Damien Zammit
Change-Id: I1088064e5f84fcabcd51e0eaaedfb5074f7fb2b5 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13709 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-02-05nb/amd/mct_ddr3: Fix RDIMM training failure on Fam15hTimothy Pearson
Certain registered DIMMs failed training due to an error likely introduced during historical rebase. Ensure that the SubMemclkRegDly bit is set according to BKDG recommendations on Family 15 processors. Change-Id: I24c95265dada9eabf4df280b6f2b4a1eb9cecaf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13148 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05nb/amd/mct_ddr3: Work around RDIMM training failureTimothy Pearson
Under certain conditions, not elucidated in the BKDG, an extra memclock of CAS write latency is required. The only reliable way I have found to detect when this is required is to try training without the delay, and if DQS position training fails, adding the delay and retraining. This is probably related in some form or another to the badly broken DQS Write Early algorithm given in the BKDG. Change-Id: Idfaca1b3da3f45793d210980e952ccdfc9ba1410 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13531 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-02src: Fix various spelling and whitespace issues.Martin Roth
This fixes some spelling and whitespace issues that I came across while working on various things in the tree. There are no functional changes. Change-Id: I33bc77282f2f94a1fc5f1bc713e44f72db20c1ab Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13016 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-01nb/amd/amdmct/mct_ddr3: Save and restore SkewMemClk for S3 resumeTimothy Pearson
Change-Id: Ib331bd330530d4d6be5eb7351d9f9b15c135dd63 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13167 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29nb/amdmct/mct_ddr3: Enable mainboard voltage setTimothy Pearson
The existing code used an incorrect macro name to check for mainboard DRAM voltage set support, and as a result no voltages were actually set. Furthermore, the existing code did not contain a centralized voltage assumption for boards that did not have a DIMM voltage set implementation. Use the correct macro name to test for boards with voltage set implementation, and provide a basic fallback to 1.5V operation for boards without a voltage set implementation. Change-Id: I638c65fe013a8e600694d8cbedf6a10b33b0ef95 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13150 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29cpu/amd/fam10h-fam15h: Correctly create APIC ID on single node systemsTimothy Pearson
The existing code generated an incorrect boot APIC ID from node and core number for single node packages, leading to a boot failure when the second node was installed. Properly generate the boot APIC ID from node and core number. Change-Id: I7a00e216a6841c527b0a016fa07befb42162414a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13149 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-24nb/amd/mct_ddr3: Properly set MR0 WR valueTimothy Pearson
The existing code accidentally truncated the MSB from the MR0 WR value. While this probably had a minimal effect in reality, it should be configured correctly for maximal system stability. Change-Id: Ifb8a39c6ca47b32b44d33735e5c6c39f1dc5a44e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13147 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-01-24nb/amd/mct_ddr3: Add additional verbose-level debug statementsTimothy Pearson
Change-Id: Ie91c990d9c2bcab8292a75d87523a46d5694a34a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13146 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24nb/amd/mct_ddr3: Update drive strength configurationTimothy Pearson
The existing drive strength calibration code did not strictly follow the BKDG-defined setup process. Bring the calibration code in line with the BKDG recommendations. Change-Id: I122eeb93958d88de59d0c3b2979f607afa2c52c3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13145 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24northbridge/amd/amdmct/mct_ddr3: Enable fast refresh on ETR devicesTimothy Pearson
When an Extended Temperature Range DIMM is installed on a channel the refresh rate should be increased per the BKDG recommendations to allow correct operation at higher temperature ranges. Set fast refresh on a channel if an ETR DIMM is installed on that channel. Change-Id: I7a085d34efc78f3f0794a5cb33b88f27a5e6d54e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13144 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24northbridge/amd/amdmct: Add termination and timing values for C32 socketsTimothy Pearson
The existing MCT initialization code was largely missing C32 socket- specific configuration data. Add C32 socket-specific timing and ODT values as specified in the BKDG. Change-Id: I8eef8d5c8581f03d269663a338d5542744c5cdd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13141 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24northbridge/amd/amdfam10: Update DRAM speed limits for C32 socketsTimothy Pearson
The existing code applied G34-specific speed limits to all socket types. Update G34 and C32 specific speed limits to be in line with BKDG recommendations. Change-Id: I958ad333c47948ae741a56de5866af3e636fd24d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13140 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
This continues what was done in commit a73b93157f2 (tree: drop last paragraph of GPL copyright header) Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12914 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-04Revert "AMD OemS3Save: refactor for Merlin Falcon"Kyösti Mälkki
This reverts commit d3deecdd9c5c0a8031f2ea9d6c90e0997f123d93. Do not mix open-source AGESA and binary PI trees. Once you have working S3 support for binaryPI platforms, add the adapted oem_s3.c file as northbridge/amd/pi/oem_s3.c instead. Change-Id: I7c981d0023a5c0225e046f9c0104acfa07436b79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/12282 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-18southbridge/amd/sr5650: Add MCFG ACPI table supportTimothy Pearson
As the southbridge largely controls the PCI[e] configuration space this patch moves the resource allocation from the northbridge to the southbridge when the extended configuration space region is enabled. Change-Id: I0c4ba74ddcc727cd92b848d5d3240e6f9f392101 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12050 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-12-13amd/[nb/fam10|sb/sr5650]: Minor cosmetic changesTimothy Pearson
Change-Id: Ia9cb4fe4f46327e38648f89da0ffce647fb118d3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12712 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-08northbridge/amd/agesa/agesawrapper.c: Fix Kconfig symbolsMartin Roth
The Kconfig symbols were missing an underscore, so were not getting evaluated properly. Change-Id: I619cf3f44f44f9c9699482d64164d3db28cd4c8f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12559 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-12-06Remove #ifdef checks on Kconfig symbolsMartin Roth
In coreboot, bool, hex, and int type symbols are ALWAYS defined. Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12560 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06amd/pi/00660F01: Remove 'PER_DEVICE_ACPI_TABLES'Martin Roth
The PER_DEVICE_ACPI_TABLES Kconfig symbol is no longer used as it was removed in commit 83f81cad (acpi: Remove monolithic ACPI) Change-Id: Ie6ba252f6e7d33da9d4500f1201367f116e4c505 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12554 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-04northbridge/amd/amdht: Reduce excessive romstage array sizeTimothy Pearson
Change-Id: Ibcdf5d3927375da5cb72987ae83eaaa789ab9a70 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12573 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-01nb/amd/amdht: Fix XCS buffer count setup on AMD Family 15h CPUsTimothy Pearson
The existing code re-used the Family 10h XCS buffer setup on Family 15h CPUs, which set incorrect values leading to random system lockups. Use the Family 15h XCS buffer setup shown in the BKDG. Change-Id: Ie4bc8b3ea6b110bc507beda025de53d828118f55 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12070 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-01nb/amd/amdfam10: Fix incorrect channel buffer count configurationTimothy Pearson
The secondary bus number set code incorrectly overwrote the link buffer settings in F0x[F4,D4,B4,94]. Constrain the secondary bus number set to the appropriate bits of the registers. Change-Id: If70825449f298aa66f7f8b76dbd7367455a6deb1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12068 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-01nb/amd/mct_ddr3: Add Family 15h tristate enable codesTimothy Pearson
The Family 15h DRAM initialization did not set up the various tristate enable codes in the MCT. Add Family 15h tristate enable setup. This fixes multiple DIMMs on a single channel. Change-Id: I0278656e98461882d0a64519dfde54a6cf28ab0f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12060 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-12-01amd/pi/00630F01: Drop HT3_SUPPORTMartin Roth
The Kconfig symbol CONFIG_HT3_SUPPORT is not implemented. This mirrors commit c5163ed8 (AMD binaryPI: Drop HT3_SUPPORT) Change-Id: I2682d3b620e2cee613c7421622a8c79db5ba3a86 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12556 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-11-30nb/amd/amdmct/mct_ddr3: Use StopOnError to decrease training timeTimothy Pearson
There is no need to continue testing a DCT configuration after data errors have already been detected; this just wastes time during boot. Change-Id: I979e27c32a3e0b101590fba0de3d7a25d6fc44d2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12066 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-30cpu/amd/family_10h-family_15h: Apply missing Family 15h errata fixesTimothy Pearson
Change-Id: I132874fe5b5a8b9a87422e2f07bff03bc5863ca4 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12065 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins)
2015-11-30nb/amd/mct_ddr3: Use antiphase to better center DQS windowTimothy Pearson
The BKDG recommends the use of an antiphase window detection algorithm to ensure that the DQS data eye is properly centered. TEST: Booted both with DIMMs known to move the data eye into the prior clock phase and DIMMs known to keep the data eye in the current clock phase. Change-Id: I1d85fddd45197ca82dcaa46fe863e64589712d1f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12059 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-29nb/amd/mct_ddr3: Fix odd rank data corruptionTimothy Pearson
The odd rank of each DIMM could experience data corruption due to incorrect DQS training. Fix the DQS training algorithm by executing the relevant portions of the training algorithm on the odd ranks. Change-Id: Ibc51f5052d5189e45b3d9aa98ca8febbfe13f178 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12058 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-29nb/amd/amdmct/mct_ddr3: Fix a minor RDIMM CS select errorTimothy Pearson
Change-Id: I4cdfeec887813c17edcdee8858222414fb19b72c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12057 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-29nb/amd/amdmct/mct_ddr3: Ensure channel clock skew is properly setTimothy Pearson
Also fix incorrect Trfc[0-3] value on Family 15h. Change-Id: Iafc233984ae1d44fe6a1cb5b109d36397cbd991a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12055 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-28nb/amd/amdfam10: Work around sporadic lockups when CC6 enabledTimothy Pearson
The silicon in control of CC6 appears to contain minor bugs and / or deviations from the BKDG; through trial and error it was found that these issues can be worked around by reserving the entire possible CC6 save region, regardless of currently installed node count. Change-Id: If31140651f25f9c524a824b2da552ce3690eae18 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12054 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-24northbridge/amd/amdmct/mct_ddr3: Add CC6 setup information messagesTimothy Pearson
Change-Id: I17660ce5429431e08476b7bba15e381636b64c7d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12053 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-11-24northbridge/amd/amdmct/mct_ddr3: Add DDR3 termination debug outputTimothy Pearson
Change-Id: Iabd2e3e20b0e9719080f6bd7be2032c1749994dc Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12056 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-24nb/amd/amdfam10: Fix gart setup not working on Fam15h processorsTimothy Pearson
Change-Id: Ib78620c30502df6add9cc2ea1dbd4fb6dc89203e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12047 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-11-24northbridge/amd/amdht: Add isochronous setup supportTimothy Pearson
The coherent fabric on all Family 10h/15h devices supports isochronous mode, which is required for IOMMU operation. Add initial support for isochronous operation. Change-Id: Idd7c9b94a65f856b0059e1d45f8719d9475771b6 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12042 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-24amd/amdfam10: Control Fam15h cache partitioning via nvramTimothy Pearson
Add options to control cache partitioning and overall memory performance via nvram. Change-Id: I3dd5d7f3640aee0395a68645c0242307605d3ce7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-24northbridge/amd/amdfam10: Rename mislabeled iommu nvram option to gartTimothy Pearson
Change-Id: Ia24102e164eb5753ade3f9b5ab21eba2fa60836b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12046 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-23northbridge/amd/amdfam10: Add Family 15h cache partitioning supportTimothy Pearson
Certain workloads may evict too many lines of other cores from the L3 cache if configured as one monolithic shared cache region. Forcibly partition L3 cache to improve performance. Change-Id: Ie4e28dd886aaa1c586b0919c5fe87ef1696f47e9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12036 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-23northbridge/amd/amdfam10: Fix invalid NUMA tableTimothy Pearson
The existing code generated an invalid NUMA table that was rejected by Linux, leading to poor resource allocation. This was due to system MMIO resources being inserted into the table when the table should only contain DRAM resources. Do not include system MMIO resources (i.e. resources with an index less than 0x10) in the NUMA table. Change-Id: I99c200382b52a99687daf266a84873d9ae2df025 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12035 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-11-23amd/amdmct/mct_ddr3: Fix poor performance on Family 15h CPUsTimothy Pearson
Change-Id: Ib6bc197e43e40ba2b923b1eb1229bacafc8be360 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12029 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-23cpu/amd: de-duplicate MSR include filesStefan Reinauer
Change-Id: I8e01a4ab68b463efe02c27f589e0b4b719532eb5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12510 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-11-22amd/amdmct/mct_ddr3: Set prefetch double stride to improve performanceTimothy Pearson
Change-Id: I34ad85388c6b71f0d44bee13afd663e0b84545cd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12037 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-11-22nb/amd/amdmct/mct_ddr3: Force DRAM retraining on every bootTimothy Pearson
Stability issues have arisen on multiple Family 15h systems when configuration restoration is enabled. In all cases these stability issues resolved by allowing the RAM to go through a full training cycle. Change-Id: I017e0dd5120110124d5b5d5276befef6f7740614 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12034 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-11-22northbridge/amd/amdfam10: Fix poor performance on Family 15h CPUsTimothy Pearson
Change-Id: I193749bc767b7c1139de7cd67622a7b03298009b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12031 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-11-20northbridge/amd/amdht: Add comment for HT Freq write orderingTimothy Pearson
The BKDG is not correct regarding HT Freq write ordering; indicate this in a comment to avoid confusion. Change-Id: I37db191c144c81aba5d4a1e6291db5669a35a31a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12030 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-20northbridge/amd/amdht: Add support for HT3 2.8GHz and up link frequenciesTimothy Pearson
Change-Id: Ifa1592d26ba7deb034046fd3f2a15149117d9a76 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12027 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-20nb/amd/amdfam10: Add HyperTransport probe filter supportTimothy Pearson
All modern Opteron processors support the HT probe filter, which helps to increase coherent fabric performance by reducing the number of HT transactions per cache probe. AMD recommends that the probe filter be enabled on all systems with more than two nodes, and it does not hurt to enable it on systems with 2 nodes. Change-Id: I00a27a828260be8685ae622cfa5a4995add95a8e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12021 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-19northbridge/amd/amdmct/mct_ddr3: Move K10D configuration into separate fileTimothy Pearson
Change-Id: Id45888f266fac7810a63fef43b8d7a0ee40cbf70 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12023 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-18cpu/amd/fam10h-fam15h: Update Fam15h APIC config and startup sequenceTimothy Pearson
This fixes Family 15h multiple package support; the previous code hung in CAR setup and romstage when more than one CPU package was installed for a variety of loosely related reasons. TEST: Booted ASUS KGPE-D16 with two Opteron 6328 processors and several different RDIMM configurations. Change-Id: I171197c90f72d3496a385465937b7666cbf7e308 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12020 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-16northbridge/amd/mct_ddr3: Add registered and x4 DIMM support to Fam15hTimothy Pearson
The existing MCT support code did not perform any of the requisite configuration to support registered or x4 DIMMs. Add the needed configuration per the BKDG for Family 15h. Change-Id: I9ee0bb7346aa35f564fe535cdd337ec7f6148f2b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12019 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>