summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-02-24mb/google/dedede: Add EMMC configurationKarthikeyan Ramasubramanian
Turn on EMMC device and enable the HS400 mode. Configure the GPIOs associated with EMMC. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ic27c68f4622eec5b2930dc38186b82d895d3f67c Reviewed-on: https://review.coreboot.org/c/coreboot/+/38856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-02-24mb/google/dedede: Add USB configurationKarthikeyan Ramasubramanian
Add USB port configuration in devicetree. Configure USB Over-Current (OC) GPIOs. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I19f7563013c7d702d52b7f34a207a34abe308621 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-02-24mb/google/drallion: Remove MAC address pass throughDtrain Hsu
Remove MAC address pass through because when MAC address pass through setting change to "Use dock built-in MAC address", the MAC address always keeps the VPD value. BUG=b:147994020 TEST=tested on drallion and the result as below. (Option) (Result) - Use pre-assigned MAC address : Pass - Use Chromebook built-in address : Pass - Use dock built-in MAC address : Pass Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I1f58e98187feb4e428ca75f7e82c464567528526 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-02-18mb/intel/glkrvp/chromeos.fmd: Correct indentationAngel Pons
Tested with BUILD_TIMELESS, no changes. Change-Id: Iaf615e95a30e9c02ad49351a3c0db253ad713ad4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-18mb/facebook/monolith: Use serial number and UUID from VPDWim Vervoorn
The serial number and UUID returned by DMI are retrieved from VPD. The solution supports a 16 character "serial_number" and a 36 character "UUID" string. BUG=N/A TEST=tested on monolith Change-Id: I0b6ce769cfa81a1e248a35f6149b7d1bbcf1f836 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-02-18mb/facebook/monolith: Enable use of VPDWim Vervoorn
Enable use of VPD for monolith. This will be used to store the UUID and Serial number. BUG=N/A TEST=build Change-Id: I32b60fef44929c51427a124cbb81e5246db2546c Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-02-18volteer: allow empty SPD_SOURCESPaul Fagerburg
Some Volteer variants might not use SPD files. Allow SPD_SOURCES in spd/Makefile.inc to be empty. BUG=None BRANCH=None TEST=Build coreboot and see that it builds without error Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: I5a8231b999e16503867d3c8df571b11fa0c1f6a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-17treewide: capitalize 'BIOS'Elyes HAOUAS
Also replace 'BIOS' by coreboot when the image is 'coreboot.rom'. Change-Id: I8303b7baa9671f19a036a59775026ffd63c85273 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-17ec/lenovo/h8/acpi: Add alternative Fn-F2 and Fn-F3 layoutNicola Corna
thinkpad_acpi maps the battery hotkey (KEY_BATTERY) on scancode 0x01 and the lock hotkey (KEY_COFFEE) on scancode 0x02. On the Thinkpad X1 Carbon (and possibly others), the hotkeys for Fn-F2 and Fn-F3 are different from the default one so a new layout has to be defined. Change-Id: Ib2d96be1a7815d7d03e6e8c6d300fd671c8598ca Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-02-17mb/google/slippy: Fix IRQ of the ambient light sensorNicolò Veronese
Change based on google/auron that is similar to peppy. This will be helpful for the next follow-up commit that will add ACPI for the ambient light sensor. Change-Id: Ib2a8356d261d211d5ed5c0b035c94ec56b9c25b3 Signed-off-by: Nicolò Veronese <nicveronese@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-02-17soc/intel/tigerlake: Enable Audio on TGLSrinidhi N Kaushik
Configure UPDs to support Audio enablement. Correct the upd name in jslrvp devicetree to avoid compilation issue. BUG=b:147436144 BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Idd3927a33d303ed5a663b5b838f43ed4ebc7a0db Reviewed-on: https://review.coreboot.org/c/coreboot/+/38147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-02-17mb/google/drallion/variants/drallion: Update thermal configuration for DPTFJohn Su
Follow thermal table for fine tuning. 1. Update PSV values for sensors. 2. Change PL1 min value from 4W to 5W. 3. Change PL1 max value from 15W to 12W. 4. Change PL2 min value from 15W to 12W. BUG=b:148627484 TEST=Built and tested on drallion Change-Id: I957d41e3c14f6dbcec8c3555382895698beabe40 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-02-17mb/google/drallion: Set cpu_pl2_4_cfg to baseline for DrallionJohn Su
Proper VR settings will be selected by CPU SKU and cpu_pl2_4_cfg. BUG=b:148912093 BRANCH=None TEST=build coreboot and checked IA_TDC from TAT tool. Change-Id: Ie471dee0c70e1831a822860c0a44455772a2b8be Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-02-17mb/google/octopus/variants/dood: add two new SKU IDsKenneth Chan
add SKU ID 3 and 4 for dood DVT 1: Dood WiFi + LTE (evt) 2: Dood WiFi (evt) 3: Dood WiFi + LTE + dual camera (dvt) 4: Dood WiFi + dual camera (dvt) BUG=b:148988979 TEST=build firmware and verify on the DUT of sku 3 and 4 check LTE module is enabled or not Change-Id: If86efe2a2f7b2e165ad44220b6dd59e9080b5892 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38730 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/drallion: Correct USB3 OC pin configurationEric Lai
USB3 OC pin is configured for the wrong pin. Follow HW circuit (schematics) to set it correctly. BUG=b:147869924 TEST=USB function works well and OC function is corresponds to the right port. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I61234a2054ab52fa508482d3dd0f94b13f96a5c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38885 Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/puff: Enable SPD_READ_BY_WORD to short the boottimeJamie Chen
Puff uses the smbus to access the SPD of memory DIMMs. It will short the SPD reading time if enabling SPD_READ_BY_WORD. BUG=b:149360051 BRANCH=None TEST=build puff and boot up OS ran cbmem -t | grep FspMemoryInit Without this patch: 950:calling FspMemoryInit 643,199 (257,588) With this patch: 950:calling FspMemoryInit 477,714 (154,612) Signed-off-by: Jamie Chen <jamie.chen@intel.com> Change-Id: I161e8eb386ab604b16746f0deeecc3d6c9063c3a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-02-17mb/google/kukui: fine tune the video timing of panel-BOE_TV101WUM_N53Jitao Shi
Fine tune the video timing of panel-BOE_TV101WUM_N53 to avoid noise. The parameters are based on BOE NV101WUM-N53 preliminary product spec. BRANCH=kukui BUG=b:147378025 TEST=bootup pass Change-Id: Ia9e2cc90f233e87d712c2dc6f4441ca2e5423162 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38401 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/kukui: Add panel for KakaduCasper Chang
Declare the following panel for Kakadu: - BOE_TV105WUM_NW0 BUG=b:148997748 TEST=build Kakadu image passed BRANCH=kukui Signed-off-by: Casper Chang <casper_chang@bitand.corp-partner.google.com> Change-Id: I394b8cafa8be40e5fd6bf8ceb81b520df73718a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38822 Reviewed-by: Peichao Li <peichao.wang@bitland.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/octopus: Add custom SAR values for BipshipTony Huang
Bipship is a sustaining project of Blooguard. SAR value follow Blooguard. BUG=b:149414960 BRANCH=octopus TEST=build and verify load correct SAR value by sku-id Change-Id: Ic45ed10fc147401d4278f1811a86cd2b2e4c63ac Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-02-17mb/google/dedede: Configure I2C portsKarthikeyan Ramasubramanian
Enable I2C ports that are used. Add GPIO configuration for the I2C ports. Enable config items that are required for I2C HID & Generic devices. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I12e974530fb5f61fae5d12cadbb3f928e617d73a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-02-17mb/google/dedede: Add console UART configurationKarthikeyan Ramasubramanian
Enable UART Port 2 as console UART and configure the concerned GPIOs. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I30a64a3c96226ce3244d55919b6d65fbf0a096e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38776 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/dedede: Enable AP <-> H1 CommunicationKarthikeyan Ramasubramanian
Turn on the H1 device in the devicetree. Configure the concerned GPIOs and enable the required config items. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I37972635454cd0d35608623e7be4110012ace658 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38772 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17ec/purism/librem: Add ACPI temp reportingMatt DeVillier
Add EC ACPI reporting of current temp and platform critical temp. Adapted from ACPI dump of ODM AMI firmware. TEST: check reporting of current/critical temps via lm-sensors from ACPI on Librem 13v1 and 13v4 boards. Change-Id: I92641fbbdda46e0c388607a37f7a7cc2dcd6c26d Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-17Revert "mb/google/hatch: Override CPU flex ratio"Tim Wawrzynczak
This reverts commit a017e5fb3dda5ea6bbc94ee15b2e981eeaa2d918. Reason for revert: The extra reset in the FSP after the flex ratio is changed causes recovery reasons to be lost. There are some vboot changes that recently landed that could help with this issue, but for now, we are working on a new AU image for Kohaku and this is causing our automated testing to fail. Change-Id: Ic38b390842e2a533033587b3247b7c8d982b1dff Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-17mb/apple/macbookair4_2: Add CMOS supportEvgeny Zinoviev
Added CMOS support for MacBook Air 4,2. In future, I hope there will be more useful options available, because I'm working on macbooks support. Also, it may be necessary for hyper_threading support (#29669) once it will be ready. Change-Id: I369ed9aeff2098a4840918531be6a34cfc8d2a1e Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
2020-02-17vboot: push clear recovery mode switch until BS_WRITE_TABLESJoel Kitching
Serves two purposes: (1) On some platforms, FSP initialization may cause a reboot. Push clearing the recovery mode switch until after FSP code runs, so that a manual recovery request (three-finger salute) will function correctly under this condition. (2) The recovery mode switch value is needed at BS_WRITE_TABLES for adding an event to elog. (Previously this was done by stashing the value in CBMEM_ID_EC_HOSTEVENT.) BUG=b:124141368, b:35576380 TEST=make clean && make test-abuild BRANCH=none Change-Id: I30c02787c620b937e5a50a5ed94ac906e3112dad Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-02-15mb/intel/jasperlake_rvp: Enable only required PCIE root portsUsha P
Jasper Lake SOC has 8 PCIe root ports. Cleaning up the root ports as per Jasper Lake. This patch updates the devicetree to enable WLAN and NVME for jasperlake_rvp and removes the other root port configurations which are not required. Change-Id: I6c801d81ccece6b45a7c45212533bb33a6805367 Signed-off-by: Usha P <usha.p@intel.com> Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38679 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-14mainboard/supermicro: x11ssm-f: disable SUART3/4Michael Niewöhner
SUART3/4 are unused on this board (verified by checking registers on vendor BMC firmware). Further they break the console for an unknown reason. Thus disable them. Change-Id: I30bb8184d03ee1037d9ec33eb1d93ee540563fc5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38818 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-14mainboard/supermicro: x11ssh-tf: drop leftovers of SUART3/4Michael Niewöhner
SUART3/4 are unused on this board (verified by checking registers on vendor BMC firmware). Thus drop the remaining settings. Change-Id: I2ababd92fcd7016c508aa3119e798f75eeb90a1c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38817 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-13mainboard/supermicro/x11-lga1151: correct board idsMichael Niewöhner
X11SSM-F has a different board id (0896) than X11SSH-TF (089C). Use the right id for the right board. Change-Id: Ib0d5e66ce1a973f29a1da78f04f7ef677b260cd8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-02-13mb/pcengines/apu2: Remove unnecessary initializationPaul Menzel
The variable is never read before being assigned a value at the end of the function. Change-Id: I3b42dcd564480005b2c520316933940d87b6e418 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-02-13mb/pcengines/apu2: Use variable `len` holding same valuePaul Menzel
Change-Id: Ia5916f191a7b1a846231b7e36924a16f3a658961 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-02-11mb/google/volteer: use new Tiger Lake memory configNick Vaccaro
Some of the common memory code that was being performed in mainboard has moved into the soc to reduce redundant code. This change adapts volteer to use Tiger Lake's new common code. BUG=b:145642089, b:145238504, b:145564831 BRANCH=none TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer, boot to kernel, "cat /proc/meminfo" and verify it reports "MemTotal: 8038196 kB". Change-Id: I32c9b8a040728d44565806eece6cf60b6b6073b6 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-11mb/facebook/monolith: Enable the 2nd EC UART at 0x2f8Wim Vervoorn
BUG=N/A TEST=tested on facebook monolith Change-Id: I36e652e66c66eeb770a5a5d987bb57c7eaa11382 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38749 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-11mb/lenovo/x201/acpi_tables: Default to lid openPeter Lemenkov
It's really hard to power up this laptop with the lid closed so let's make it open by default, as done on many other laptops. Change-Id: I5bb2f716865c2bb569a4735f135842526043713c Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-09mb/lenovo/t400: Configure panel-power sequencingNico Huber
If the panel-power sequencer is not configured, libgfxinit falls back to very conservative defaults (210ms before EDID is probed). This results in a boot penalty of >100ms (depending on how long it takes to probe other ports). Values are taken from the VBTs already checked in. Untested. Change-Id: I189776ce8684b4c3c01acd6d2fc433ca33a050d5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-02-09mb/lenovo/t400: Correct display port list for R500 variantNico Huber
The second digital display connector is unused, but strapped as if it were used. Versions with a discrete GPU seem to use PM45 (i.e. no IGD), so we can ignore these. Based on schematics only, not tested. Change-Id: Ibb47fdeef2adb9c574b7f3ec8e2b1d61d28f21da Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-02-09mb/lenovo/t400: Correct display port list for [TW]500 variantsNico Huber
T500 and W500 (Coronado-5) use both digital display connectors. Both with the DP AUX channel implemented, so add DP2 to the list. Versions with a discrete GPU don't use external, digital connectors but seem to have the straps correctly configured. So we hopefully won't have to handle these specifically. Based on schematics only, not tested. Change-Id: I31e1415eff2d5d00c4a231906e3d861d2a59b629 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-02-09mb/lenovo/t400: Correct display port list for [RT]400 variantsNico Huber
The first digital display connector is unused, but strapped as if it were on later revisions. The DP AUX channel of the second connector is implemented, though, so add DP2 to the list. Versions with a discrete GPU don't use external, digital connectors but seem to have the straps correctly configured. So we hopefully won't have to handle these specifically. Based on schematics only, not tested. Change-Id: I7d3e8b3a2123ddc407bb5a0cce86a3634b575f4a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-02-09mb/lenovo/t400: Move `gma-mainboard.ads` to variantsNico Huber
Some board revisions have the straps for display port detection wrongly configured. So with a single list covering all variants' possible outputs, we make libgfxinit probe unimplemented ports which may stall the GMBUS controller and delay the boot for some hundred milliseconds. This just copies the list to the various variants with different display ports, so we can test the actual changes individually. Change-Id: I48cdea1d71d9553b6bdbce432eae986996329239 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-02-09mb/google/octopus/variants/lick: Increase TCC offset to 15Hash.Hung
Change tcc offset from 0 to 15 degree celsius for lick. BUG=b:147198431 BRANCH=octopus TEST=Build, and verify test result by thermal team. Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com> Change-Id: Ife6b02321145837e05c82f979998466b83317f86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38506 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-09mb/google/dedede: Add initial configuration for serial IO portsKarthikeyan Ramasubramanian
Add initial configuration for GSPI, I2C and UART ports and leave them in disabled state. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I1cd7659337e6330a8ece34df247e399a085d21d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-02-09mb/google/dedede: Turn on ESPI device in devicetreeKarthikeyan Ramasubramanian
BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I12a63e5776619e5a7684cf1edad78b0fd6fac12c Reviewed-on: https://review.coreboot.org/c/coreboot/+/38739 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-09mb/google/dedede: Add GPE configurationKarthikeyan Ramasubramanian
Configure the GPIO groups to be routed to the GPE0 block. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ife4d0179bd9fe1785e971686478f7c76de805e87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-09mb/google/dedede: Add Compute & PCH Global device IDsKarthikeyan Ramasubramanian
Add compute and PCH Global device IDs with the concerned devices turned off. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I6f226abd52d4a27535de6711e93355b5f84a1941 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-09mb/google/volteer: add volteer mainboard initial supportNick Vaccaro
Created a new Google baseboard named volteer from scratch. BUG=b:142961277 BRANCH=master TEST="emerge-volteer coreboot" compiles successfully. Change-Id: I03a13f3df4e819ab9cf63ad69867c807d2a1b651 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-09mb/google/drallion: Add new SPD files for drallionIan Feng
Add new SPD files for drallion: 1. Hynix H5AN8G6NDJR-XNC 2. Samung K4AAG165WA-BCWE 3. Samung K4A8G165WC-BCWE BUG=b:148642500 TEST=Compile successfully and check SPD info in cbmem log. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I0e9b444f6f1e0c7e1da197fbd2e70e686568ab47 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38731 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-09mb/google/drallion: Tuning WWAN power sequenceEric Lai
Change GPP_C10 from pltrst to deep to meet the warmboot power sequence. BUG=b:146935222 TEST=measure WWAN power sequence is meet spec Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia1513ed38fbc1c99a10a5fa531a78cc92a3ebfc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-02-09mb/google/dedede: Log mainboard events to elogKarthikeyan Ramasubramanian
BUG=b:148410914 TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7dffa5c021787dca75786ead42164bd29ba56828 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-09mb/lenovo/t440p: Enable dGPU on Lenovo T440PChris Morgan
Enable the dGPU on the Lenovo T440P. It uses the same code (roughly) of the T430S. By default, it is set to be disabled however it can be enabled via the nvram option enable_dual_graphics. Removed hybrid graphics options too as they are not valid for the T440p. Tested on a T440P with Ubuntu 18.04.4 with Kernel 5.3.0-29 (successful). Tested on same machine with Windows 10 1909 (machine check exception bluescreen). Change-Id: Idf8c2c0d1ae34bda8736448d3e350396e3cf7a93 Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-02-09mb/google/octopus: Override VBT selection for BloogTony Huang
Since most of Bloog series SKUs need to disable DRRS support. If Bloog and Unprovisioned SKUs then return vbt.bin to enable DRRS support, return vbt_blooguard.bin for other SKUs to disable DRRS support. Bipship follow blooguard to disable DRRS support. BUG=b:148892903, b:147021309 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is bipship. Change-Id: I61f12d4ddea17a05255751fde2a5ce822dd2e782 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-02-08Add configurable ramstage support for minimal PCI scanningRonald G. Minnich
This CL has changes that allow us to enable a configurable ramstage, and one change that allows us to minimize PCI scanning. Minimal scanning is a frequently requested feature. To enable it, we add two new variables to src/Kconfig CONFIGURABLE_RAMSTAGE is the overall variable controlling other options for minimizing the ramstage. MINIMAL_PCI_SCANNING is how we indicate we wish to enable minimal PCI scanning. Some devices must be scanned in all cases, such as 0:0.0. To indicate which devices we must scan, we add a new mandatory keyword to sconfig It is used in place of on, off, or hidden, and indicates a device is enabled and mandatory. Mandatory devices are always scanned. When MINIMAL_PCI_SCANNING is enabled, ONLY mandatory devices are scanned. We further add support in src/device/pci_device.c to manage both MINIMAL_PCI_SCANNING and mandatory devices. Finally, to show how this works in practice, we add mandatory keywords to 3 devices on the qemu-q35. TEST= 1. This is tested and working on the qemu-q35 target. 2. On CML-Hatch Before CL: Total Boot time: ~685ms After CL: Total Boot time: ~615ms Change-Id: I2073d9f8e9297c2b02530821ebb634ea2a5c758e Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2020-02-07mainboard/hatch: Fix puff DP output on cold bootsEdward O'Callaghan
Wait for HPD DP unless HDMI is plugged. Some Type-C monitors do not immediately assert HPD. If we continue to boot without HPD asserted, Depthcharge fails to show pictures on a monitor even if HPD is asserted later. Similar to that of b:72387533 however our DP&HDMI are beind a MST. See commit d182b63347c744c on how this was done for mainboard/fizz. BUG=b:147992492 BRANCH=none TEST=Verify firmware screen is displayed even when a type-c monitor does not immediately assert HPD. Verify if HDMI monitor is connected, AP does not wait (and firmware screen is displayed on HDMI monitor). Change-Id: I19d40056e58f1737f87fd07d62b07a723a63d610 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2020-02-06mb/pcengines/apu2: use AGESA 1.0.0.4 with adjusted AGESA headerPiotr Kleinschmidt
PC Engines apu2 platform uses AGESA 1.0.0.4, because upstream AGESA 1.0.0.A doesn't work on apu2 - the platform doesn't boot. To properly utilize AGESA 1.0.0.4 we need to adjust AGESA header to state, which is compatible with AGESA 1.0.0.4 version. Cut out the changes introduced in CB:11225 exclusively for apu2 board. TEST=boot PC Engines apu2 and launch Debian Linux Change-Id: I3d85ee14e35dae8079e8d552b6530a3867f65876 Signed-off-by: Piotr Kleinschmidt <piotr.kleins@gmail.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-02-06mb/google/hatch: Add noise mitigation setting for dratini/jinlonWisley Chen
Enable acoustic noise mitigation, the slow slew rates are fast time divided by 8 and disable Fast PKG C State Ramp (IA, GT, SA). BRANCH=hatch BUG=b:143501884 TEST=build and verify that noise reduce. Change-Id: I65f47288a7b1da98296fdba87ab5ca0c3a567aaf Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38212 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-05mb/google/drallion: Fine tune touch screen power sequenceEric Lai
Follow HW change to use GPP_D15 as TS_RST. And change GPP_B21 from pltrst to deep in order to met power off timing. BUG=b:143733039 TEST=Check touch screen is functional in s0 and resume from s0ix Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ieec7eb78a05e653f271e348ed11f7e31c08bd5dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/38665 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-05mb/google/hatch: Correct PCIe ports setting for mushuAmanda Huang
1. Enable PCIe port for dGPU 2. Change WLAN PCIe port from port 14 to port 7 BUG=b:147249494 TEST=Ensure dGPU and WLAN shows up with lspci. Change-Id: Iea3292be7d8029c35847118228bbb773418632a1 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38399 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-05mb/intel/tglrvp: pin mux for ISHWonkyu Kim
TGL FSP does pin mux for ISH related to pins by UPD(PchIshSpiEnable, PchIshUartEnable, PchIshI2cEnable, PchIshGpEnable) but as default UPD value is disabled, FSP doesn't do pin mux. So pin mux for ISH in gpio.c. Pin mux for ISH for TGLRVP ISHUART0: GPP_D13, GPP_D14 as NF1 ISHI2C0: GPP_B5, GPP_B6 as NF1 ISHGPIO0-7: GPP_D0~D3, GPP_D17~D18, GPP_E15~E16 as NF1 BUG=none BRANCH=none TEST=Build and boot to OS and check pinctl driver to check pin mux. Check ISHUART0, ISHI2C0, ISHGPIO0-7 native function setting. They should be NF1. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I1a9ba3a713527f5ce962659960418cd0f37dd262 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-02-04mb/google/hatch: Enable Audio DSP oscillator qualification for S0ixAamir Bohra
BUG=b:139481313 Change-Id: I1a0911b7967e5823fdce98195420728bd38c80f6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-02-04mb/google/puff: Enable HECI communicationJamie Chen
Set HeciEnabled = 1 on puff device tree to turn on Intel ME communication interface. BUG=b:143232330 BRANCH=None TEST=Build puff and boot up OS. ran lspci and confirmed there is a HECI device. 00:16.0 Communication controller: Intel Corporation Device 02e0 Change-Id: I2debb885022ae31e395869d014a91824b5dd980c Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-02-03lenovo/t440p: fix keyboard backlightIru Cai
It is found that keyboard backlight in T440p is enabled by clearing bit 3 of EC RAM 0x01. This patch sets has_keyboard_backlight in devicetree.cb and also corrects the CMOS configuration. Change-Id: Ib4c2b1591d26e2bb33f9549e3933efe9a6e0b043 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Dennis Witzig <dennis@wtzg.de> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2020-02-01hatch/mushu: Fix FPMCU pwr/rst gpio handlingCraig Hesling
Asserting reset in RO instead of in RW has no impact on security or performance, but it does limit improvements to this process later. This fix removes reset line control from RO and makes these variants consistent with other hatch variants. This fix reinforces the concept from commit fcd8c9e99e (hatch: Fix FPMCU pwr/rst gpio handling). BUG=b:148457345 TEST=None Change-Id: I12dc0c3bead7672e2d3207771212efb0d246973a Signed-off-by: Craig Hesling <hesling@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-02-01mb/google/hatch/variants/mushu: Enable dGPU BOMACO modeAmanda Huang
Configure GPP_H22 as output pin for BOMACO mode enabled. BOMACO stands for "Bus Off Memory Alive Core Off". BUG=b:146081272 TEST=emerge-mushu coreboot Change-Id: Ic35e55771d76b7254bcb457fcb38f37433b9ad67 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38210 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/{lenovo/x201,packardbell/ms2290}/acpi: Use GOS methodPeter Lemenkov
Change-Id: I6408cb3c9ef1227d8cf7df12d192b10341205e2c Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37944 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/google/hatch: Modify kohaku's EC_SCI_EVENTS maskTim Wawrzynczak
Remove EC_HOST_EVENT_MKBP from kohaku's EC_SCI_EVENTS mask, so that MKBP events don't generate an SCI. The EC is also being changed to use host events to wake up the system, and use the EC_INT_L line for MKBP IRQ signalling. Otherwise, there would be two IRQs generated for MKBP events. BUG=b:144122000 BRANCH=firmware-hatch-12672.B TEST=System shows ACPI interrupt as the wakeup IRQ, and the MKBP host event is properly processed as well. Change-Id: I9ff964e38e66ccb953a1adad5a936a9da6e4f3a1 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38654 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/lenovo/t520: Switch to overridetreePeter Lemenkov
Change-Id: If6be9cffe97dcd8f733e3bd5a67a408dd817005a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37295 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/google/hatch: Override CPU flex ratioSubrata Banik
This patch overrides CPU flex ratio on hatch in order to get better boot time numbers in vboot_reference. BUG=b:142264107 TEST=Able to save ~100ms of platform boot time while running with lower cpu flex ratio (i.e. freq ~1500MHz) Without this CL 1100:finished vboot kernel verification 802,443 (148,108) With this CL 1100:finished vboot kernel verification 685,382 (46,496) Change-Id: Idd1d1c0c04b1f742f17227a1335f27a956ee940d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36865 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-30mb: Fix typos in comments in AGESA boardsElyes HAOUAS
Change-Id: I4821c48ccac92f412126cea0f22cca5fd8bf8647 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
2020-01-30mainboard/google/hatch: Fix Puff _PR to toggle NIC ISOLATE# for S0ixEdward O'Callaghan
Turns out when going into S0ix we want the kernel to toggle de-assert to 0 for the ISOLATE# pin on the NIC for S0ix not to be woken by PCIe traffic on PCH. Upon resume the ISOLATE# pin on the NIC is then re-asserted for it to become lively again. BUG=b:147026979 BRANCH=none TEST=Boot puff and do 1500 cycles of S0ix. Change-Id: I3470e1edd93b461b66fc6444541a64339bcdcce3 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38523 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-29mb/intel/kblrvp: Replace whitespaces with tabs in dsdt.aslSubrata Banik
Change-Id: I66e2cfd041f9a93668e41d79c40cec9cb1bd917e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-01-29mb/intel/tglrvp: pin mux for image clocksWonkyu Kim
pin mux for IMGCLKOUT_0 and IMGCLKOUT_1 BUG=none BRANCH=none TEST=Build and boot to OS and check pinctl driver to check pin mux for Image clocks pins(GPP_D4, GPP_H20) Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ifb0c2b17dd481ef6c19bdf9ee84f47ef08d7b9a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-28mb/hp/pavilion_m6_1035dx: Fix typosElyes HAOUAS
Change-Id: Ibd6f6bf7983382901a5327121d277606f609eca4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-01-28mb/lenovo: Remove unnecessary whitespace in commentsPeter Lemenkov
This makes diff between boards even smaller in some cases. Change-Id: I42ecaf5de657275708ddaf2c926fe31fe16a7220 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-01-28mb/intel/tglrvp: Enable DP ports for TGLRVPWonkyu Kim
TGLRVP uses DdiPort1Hpd and DdiPort1Ddc. So only enable them. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check FSP log or DP port pin mux from pinctl driver. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ief6376ba59c77340e272923958b6b5f0a1456d9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38529 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28mainboard/supermicro/x11-lga1151-series: Disable UART3 and 4Christian Walter
With UART3 and 4 enabled, the serial console in LinuxBoot crashes. This is a short-term solution until we found and fixed the original bug. Change-Id: I75cb387ef12944232b51f6d8d41810bb27754b05 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-01-28mb/google/dedede: Add helper functions to get board_infoKarthikeyan Ramasubramanian
Add helper functions to get board's sku_id and fw_config. Enable EC_GOOGLE_CHROMEEC_BOARDID to get board_id. Add board's SKU ID and OEM name into SMBIOS table. BUG=b:144768001 TEST=Build Test. Change-Id: Id1729e245accf5acc29307a22721362fb1ce0878 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38551 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28mb/google/fizz/variants/endeavour: Enable root ports for TPUsJeff Chase
BUG=b:148221635 TEST=build;install;lspci Change-Id: I1732f7fe64ace41a721a2d6a964988efc97b2579 Signed-off-by: Jeff Chase <jnchase@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38550 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28commonlib: Add commonlib/bsdJulius Werner
This patch creates a new commonlib/bsd subdirectory with a similar purpose to the existing commonlib, with the difference that all files under this subdirectory shall be licensed under the BSD-3-Clause license (or compatible permissive license). The goal is to allow more code to be shared with libpayload in the future. Initially, I'm going to move a few files there that have already been BSD-licensed in the existing commonlib. I am also exracting most contents of the often-needed <commonlib/helpers.h> as long as they have either been written by me (and are hereby relicensed) or have an existing equivalent in BSD-licensed libpayload code. I am also relicensing <commonlib/compression.h> (written by me) and <commonlib/compiler.h> (same stuff exists in libpayload). Finally, I am extracting the cb_err error code definitions from <types.h> into a new BSD-licensed header so that future commonlib/bsd code can build upon a common set of error values. I am making the assumption here that the enum constants and the half-sentence fragments of documentation next to them by themselves do not meet the threshold of copyrightability. Change-Id: I316cea70930f131e8e93d4218542ddb5ae4b63a2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-01-27google/octopus: Disable bootblock consoleJulius Werner
The GLK bootblock seems(?) to be hard limited to 32KB and some Octopus variants are so close to that that they only have 0.5KB left. This is blocking development of new core features, so let's disable the bootblock console to gain a couple of KB back (like we already did on RK3288). There are probably other opporunities for code size reduction here (e.g. it seems that almost half(!) of that whole bootblock size is taken up by devicetree.cb structures), but I'm not familiar enough with the platform to dig into them. Change-Id: I05b4ecf5abef7307e3d0a81db04a745ff3da0c42 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38521 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-27mb/gigabyte/ga-b75m-d3h: add ACPI definitions for legacy PCI slotsBill XIE
All variants of ga-b75m-d3h lack ACPI definitions for legacy PCI slots, which causes IRQ issue if it gets legacy PCI card installed. The missing definitions (mainly Interrupt Routing Table) are added to fix that. NOTE: The added definitions are actually for ga-b75-d3v, but since they form superset of definitions needed by ga-b75m-d3{h,v}, they can be applied to all three existing variants with suitable preprocessor instructions. Change-Id: Id79c759a5fadb38c2873edc07293cbb14401ac9a Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-27mainboard/google/hatch: Set GPP_C7 as the wake pin for the NIC on PuffSam McNally
BUG=b:148252157 BRANCH=none TEST=Put a puff in s0ix, send a WoL magic packet. Change-Id: I4a08a2f5505d00909c9301315fcf72f687141f91 Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-27mainboard/system76: Add System76 Lemur Pro (lemp9)Jeremy Soller
The System76 Lemur Pro (lemp9) is an upcoming laptop computer. Support in coreboot is developed by System76 and provided as the default firmware option. Testing is done on a pre-production model expected to be identical from a firmware perspective to the production model. Working: - Payload - Tianocore - CPU - Intel i7-10510U - Intel i5-10210U - EC - ITE IT5570E running https://github.com/system76/ec - Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys - Battery - Charger, using AC adapter or USB-C PD - Suspend/resume - Touchpad - GPU - Intel UHD Graphics 620 - GOP driver is recommended, VBT is provided - eDP 14-inch 1920x1080 LCD - HDMI video - USB-C DisplayPort video - Memory - Channel 0: 8-GB on-board DDR4 Samsung K4AAG165WA-BCTD - Channel 1: 8-GB/16-GB/32-GB DDR4 SO-DIMM - Networking - M.2 PCIe/CNVi WiFi/Bluetooth - Sound - Realtek ALC293D - Internal speaker - Internal microphone - Combined headphone/microphone 3.5-mm jack - HDMI audio - USB-C DisplayPort audio - Storage - M.2 PCIe/SATA SSD-1 - M.2 PCIe/SATA SSD-2 - RTS5227S MicroSD card reader - USB - 1280x720 CCD camera - USB 3.1 Gen 2 Type-C (left) - USB 3.1 Gen 2 Type-A (left) - USB 3.1 Gen 1 Type-A (right) Not working: - TPM2 - SPI bus 0, chip select 2 is used. Chip selects other than 0 are not currently supported by the intel fast_spi driver. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: Ib0a32bbc6f89a662085ab4a254676bc1fad7dc60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-27mb/intel/tglrvp: Enable MIPI cameraWonkyu Kim
Add MIPI camera ACPI Update GPIO pin mux for camera BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check camera Simple test method to check camera: capture image by below commands from OS console >media-ctl -V "\"Intel IPU6 CSI-2 5\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI-2 5\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"ov8856 18-0010\":0 -> \"Intel IPU6 CSI-2 5\":0[1]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [crop:(0,0)/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"Intel IPU6 CSI-2 5\":1 -> \"Intel IPU6 CSI2 BE\":0[1]" >media-ctl -l "\"Intel IPU6 CSI2 BE\":1 -> \"Intel IPU6 CSI2 BE capture\":0[1]" >yavta -u -c5 -n5 -I -s 3280x2464 --file=/tmp/frame-#.bin -f SGRBG10 $(media-ctl -e "Intel IPU6 CSI2 BE capture") Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I4189e96f68f0e64e0860405e00eeab84564b86be Reviewed-on: https://review.coreboot.org/c/coreboot/+/37863 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-27mb/google/dedede: Enable ECKarthikeyan Ramasubramanian
Perform EC initialization in bootblock and ramstages. Add associated ACPI configuration. BUG=b:144768001 TEST=Build Test. Change-Id: Ib31ae190818c8870bdd46ea6c3d9ca70dc0485cc Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-27mb/google/dedede: Enable building for Chrome OSKarthikeyan Ramasubramanian
Enable building for Chrome OS and add associated ACPI configuration. BUG=b:144768001 TEST=Build Test Change-Id: Ibb94849a903e4d4364d817de8988a430cd717e4c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-27mb/google/dedede: Add smihandler stubKarthikeyan Ramasubramanian
Add stub implementation of smihandler. BUG=b:144768001 TEST=Build test. Change-Id: I7ab25888812bfb4578915e342b14355ccd15f5cc Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-27mb/google/dedede: Enable ACPI and add ACPI tableKarthikeyan Ramasubramanian
Enable ACPI configuration and add DSDT ACPI table. BUG=b:144768001 TEST=Build Test Change-Id: I0aa889cd52bff3e1e9ff7b7b93ec1000045bcfd2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-27mb/google/dedede: Add GPIO stubsKarthikeyan Ramasubramanian
Add stubbed out GPIO configuration and perform GPIO initialization during bootblock and ramstage. BUG=b:144768001 TEST=Build Test Change-Id: I1397b6a433e5046650f64f7eb9a84c51eb0c7441 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38278 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-26mb/lenovo/x201: Remove dGPU PMH7 bitsArthur Heymans
The bits cleared by this have to do with dGPU power, which this board lacks. TESTED: x201 still boots. Change-Id: I441743f76afc7bbbee930a1c8116035e85d94e52 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36911 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-25mb/intel/tglrvp: Enable rp11 for optaneWonkyu Kim
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage device and NVMe Optane memory. Storage device uses rp9 and optane memory uses rp11. This patch enables rp11. Please note that these two share clk pins. This is also dependent on pciecontroller3 config to be set as 2x2 instead of 1x4 in fit configuration in IFWI. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board from Optane and check 2 NVMe devices from lspci Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ic81244bebac78102af7ba6308ab64b18c886f839 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-25soc/intel/tigerlake: Fix GPIO communitiesShaunak Saha
GPIOs are divided into different communities. Each community consists of one or more GPIO groups. We need to configure the groups in coreboot so that they are mapped properly. GPIO comuinities in coreboot should match with the kernel gpio communities also. Kernel reads the ASL file from coreboot. This patch adds the proper community mapping in ASL code to match with kernel code. In gpio_soc_defs.c file we are indexing the groups correctly. In gpio.h file we define all the gpio devices as kernel populates sysfs with separate gpio device for each community. This patch is created based on Intel Tiger Lake Processor PCH Datasheet with Document number:575857 and Chapter number:27. BUG=b:144680462 BRANCH=none TEST=Build and boot tigerlake rvp board. In /sys/kernel/debug/pinctrl verify INTC34C5:0<1-3> listing all the pins for each community. e.g., #cat /sys/kernel/debug/pinctrl/INT34C5:00/pins should list all the community 0 pins. Change-Id: I40c386db060d84c1b7fba9c587f960d6a92f84ba Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-01-24mb/google/drallion: Remove fixed IccMax valuesJohn Su
Remove fixed IccMax values for U22 CPU. IccMax will be selected by CPU SKU. BUG=b:148110226 BRANCH=None TEST=build coreboot and fsp with enabled fw_debug. Flashed to device and checked IccMax[1]. Change-Id: Ifcd31ad5b608ce599d4294a6522fdda022f8a177 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-01-24mb/portwell/m107: Remove mainboard sleepstates.aslWim Vervoorn
BUG=N/A TEST=build Change-Id: Ifb45bc1f7f4d3744124d6797fb4c791fd5f227ca Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-24mb/intel/tglrvp: Enable SATAWonkyu Kim
Enable both SATA ports for TGLRVP. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board with SATA memory Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9f35682982a6c06522e58b0bbd7162ff02c37f32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38505 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22mb/google/hatch/var/dratini: Update DPTF parametersWisley Chen
1. Add a TEMP_SENSOR3 2. Update DFPS (fan performance state) table with values received from thermal team 3. Update PL1 override to 15W 4. Update PL2 override to 51W BRANCH=hatch BUG=b:147792204 TEST=build and verify by thermal team Change-Id: I21c17c09a097c963f4dd1b7d5f8212c83a639dc3 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38025 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22mb/google/hatch: Kohaku: Add MKBP to suspend wake eventsTim Wawrzynczak
This CL allows MKBP events from the EC to wake the system from suspend states. BUG=b:144122000 BRANCH=firmware-hatch-12672.B TEST=Verify that MKBP events generated from EC will wake the system from S0ix. Change-Id: I8a0d2c7ed89fa1ea937a08c3082cc5d3e782efff Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-22mb/facebook/fbg1701: Remove ACPI S4 supportWim Vervoorn
Align the fbg1701 sleepstates implementation with monolith. BUG=N/A TEST=build Change-Id: I3a715781bf51da41d6954463ad38ed94b0dfd217 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-22mb/facebook/monolith: Disable S3 and S4Wim Vervoorn
The monolith board doesn't support the S3 and S4 states because of the watchdog and failover mechanisms. Remove S3 and S4 from the available sleepstates. BUG=N/A TEST=build Change-Id: I01f67d8bb3f9e45caef748caca91eeb6859d7393 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-21mb/google/puff: Add ac/dc loadline configuationsJamie Chen
According to VRTT report, add ac/dc loadline configuations in puff device tree. BUG=b:147206535 BRANCH=None TEST=build coreboot and fsp with enabled fw_debug. Flashed to puff and checked the log. All ac/dc loadline configs were set correctly. Change-Id: Ia806de23a1fefcaac3ce9a462a8a04eee5eabcae Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-21mb/google/hatch/var/jinlon: Remove DPTF fan controlWisley Chen
Jinlon will use EC to control fan, so remove DPTF fan control. BUG=b:141259174 TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I8ada4fe72eee260fecf45d00510da8b91e3f10a4 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 07:09:36 +0000