summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-04-24mainboard/google/reef: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
TPM_TIS_ACPI_INTERRUPT specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot reef w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: Ic69add8a3ce35be64fb37db4ed40163f6144fc9c Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19408 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/eve: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
TPM_TIS_ACPI_INTERRUPT specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot eve w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: Ifeb09a0a35bff7cd9091f6d027f0065288ca35c9 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19407 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/poppy: use intel common tis_plat_irq_status()Aaron Durbin
Utilize the intel/common code for tis_plat_irq_status() to remove dependencies and code duplication on for bringing up a board requiring tis_plat_irq_status(). Change-Id: I2aaa1d7d3ce171dc1788438ff9990fce533deb6c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19371 Tested-by: build bot (Jenkins)
2017-04-24Kconfig: provide MAINBOARD_HAS_TPM_CR50 optionAaron Durbin
The CR50 TPM can do both SPI and I2C communication. However, there's situations where policy needs to be applied for CR50 generically regardless of the I/O transport. Therefore add MAINBOARD_HAS_TPM_CR50 to encompass that. Additionally, once the mainboard has selected CR50 TPM automatically select MAINBOARD_HAS_TPM2 since CR50 TPM is TPM 2.0. Change-Id: I878f9b9dc99cfb0252d6fef7fc020fa3d391fcec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19370 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-24nb/intel/pineview: Move to early cbmemArthur Heymans
TESTED on D510MO. Change-Id: I05aa40df0d2a090fcf734416669e9e1bbff094e4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19414 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-24nb/pineview/raminit: Fix raminit failing on hot reset pathArthur Heymans
For raminit to succeed on a hot reset the following things are prevented from running: * Clearing self refresh * Setting memory frequency * programming sdram dll timings * programming rcomp TESTED on Intel d510mo. Change-Id: I8f7e5c2958df29a96cdf856ade2f4f33707ad362 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19337 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-24mb/intel/d510mo/Kconfig: Don't override CBFS_SIZEArthur Heymans
There is no need to override CBFS_SIZE since there is no additional firmware needed on the flash. Also due to it having a description CBFS_SIZE was displayed twice in menuconfig, which is fixed by this. Change-Id: I1a8e2e458ac4d420f3fd4628c2805b6d4e2ee529 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19331 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-24mb/lenovo/x230: Enable libgfxinitIru Cai
Tested on X230 with an external screen connected to every one of the DP ports (miniDP on mainboard, two DP ports on dock), the GRUB payload can display on both the external screen and the internal LVDS screen. This is a copy-paste of I8e02c8003ff745d05ee272c59377174847f5219c. Change-Id: I8f270d558668c1fe41bcdcc7d6d2aa7f053c85b6 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/19412 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-24mb/google/fizz: Set lid status as openNaresh G Solanki
Lid switch is not available. Hence report lid state as always open. Change-Id: Ia9c82c3ad323912bad51cf55ed80a37b3110b1ef Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19219 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-04-24mb/google/fizz: Configure PCI root portNaresh G Solanki
Configure PCI root port as per schematic. Change-Id: I10ef682e8c54e22f328db5105d4da39c72ac2bed Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19390 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-24google/fizz: Configure memoryShelley Chen
Read DRAM SPD and populate MemorySpdPtr fields in UPD data structure for FSP. BUG=b:36490168, b:35775024 BRANCH=None TEST=./util/abuild/abuild -p none -t google/fizz -x -a We are currently working on bringup and have no hardware to test on yet. Change-Id: I191cc6bf1fd8aa461855c538b48fd39e3ffd7848 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19205 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-24mb/sapphire/pureplatinumh61: Update GMA configNico Huber
This board was added while the latest libgfxinit changes were in review. Update to make it compile again and sanitize the port list. Change-Id: I81b96e225945a8f8e47b64cefea91eb2747675ca Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19353 Tested-by: build bot (Jenkins) Reviewed-by: Nicola Corna <nicola@corna.info>
2017-04-24*.asl: Remove obsolete reference to TPM ASL filePatrick Rudolph
TPM ACPI entries are automatically generated, and the old static TPM ASL file is obsolete. Remove the reference to this obsolete static and empty ASL file. Delete src/drivers/pc80/tpm/acpi/tpm.asl. Change-Id: I6163e6d59c53117ecbbbb0a6838101abb468de36 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19291 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-21mb/lenovo/t420: Enable libgfxinitNico Huber
In the single GPU configuration, the T420 has an LVDS port, one DP++ and one VGA port connected to the IGD. Docking solutions feature up to two additional DP/DVI-D ports, also directly connected to the IGD. This makes the list of ports to probe pretty long (takes about 70ms if nothing but LVDS is connected). We could save about 20~30ms if we'd limit the ports in case we are not docked or have a discrete GPU. Change-Id: I8e02c8003ff745d05ee272c59377174847f5219c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19378 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-20mainboard/google/eve: Set touchpad IRQ to level triggeredDuncan Laurie
This commit changes the interrupt configuration for the touchpad to be level triggered so it matches what the device is actually using. When the system wakes from suspend by way of touchpad interrupt, or there is touchpad input while in suspend that does not wake the device (when the device is in tablet mode) the interrupt edge is not seen by the AP so the driver does not handle the event and the touchpad keeps the interrupt asserted and does not send further interrupts. The end result is a non-functional touchpad after resume until it is reset or the driver is reloaded. This happens because the touchpad is actually treating the interrupt as level triggered and expects the kernel driver to read a data packet over I2C before it will de-assert the pending interrupt. BUG=b:35774857 BRANCH=none TEST=Test that the system can reliably wake from suspend by touchpad event via the EC and continue to have a functional touchpad after resume. Change-Id: Iaf7c04d9bc9d945bdcc196dff54c92a2a68368f3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19382 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mb/asus/kgpe-d16: Enable TPM when selected in KconfigTimothy Pearson
Issue TPM startup on romstage completion via common LPC TPM code if the TPM was enabled in Kconfig. Change-Id: Id886d6aeefa045fb979f128b1cf4c10fff243b24 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/19338 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19google/gru: change kevin boot-time center logic voltage to 925mVDouglas Anderson
Kevin's center logic isn't super clean so it needs 925 mV for center logic. All newer gru variants only need 900 mV. BRANCH=gru BUG=b:37429075 TEST=Reboot tests Change-Id: I8c3bd6c245700b23c27cd5758c35c9993f801cb4 Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/479463 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19357 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-19google/gru: change center logic voltage to 900mVDerek Basehore
It seems that we should only ever run at 900mV on center logic. Changing it to 950mV before might have just masked over problems that are now fixed. BRANCH=none BUG=chrome-os-partner:56940 TEST=on kevin, run stressapptest -M 1536 -s 1000 Change-Id: I5a09b1b403df800396bb2f2e8c76d14a4519d44a Signed-off-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/391032 Reviewed-by: Douglas Anderson <dianders@chromium.org> Commit-Queue: Lin Huang <hl@rock-chips.com> Tested-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/19356 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-19mainboard/google/poppy/variants/soraka: add soraka boardYH Lin
Create Soraka board which derives from Poppy, a KBL reference board. More Soraka specific changes need to be done later on. BRANCH=master BUG=b:36995255 TEST=Build (as initial setup) Change-Id: I8af68d2cf475df56336aa0e3bebe86a54ece1999 Signed-off-by: YH Lin <yueherngl@chromium.org> Reviewed-on: https://review.coreboot.org/19343 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-19mainboard/google/poppy: Provide nhlt variant APIFurquan Shaikh
Move current NHLT configuration implementation to baseboard so that variants can leverage it or provide their own configuration. BUG=b:37375693 Change-Id: I2a4317c112f9e3614bd01eb6809727b73328d29d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19326 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Provide memory configuration variant APIFurquan Shaikh
Add support for memory configuration by providing weak implementation from the baseboard. All SPD files are present under spd/ directory. SPD_SOURCES must be provided by the variants to ensure that required SPD hex files are included in the SPD binary. BUG=b:37375693 Change-Id: Ic9bcc03d5a35bebd14061680f264ac072b3c0634 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19325 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Provide cros_gpio variant APIFurquan Shaikh
Add support for ChromeOS GPIO ACPI table information by providing weak implementation from the baseboard. BUG=b:37375693 Change-Id: I641afe6bb45f106ddebde081a8ac2c64278ebeb9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19324 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Add variant API for board_id and gpioFurquan Shaikh
Provide APIs for board_id() and gpio table functionality. Default weak implementations are provided from the baseboard. BUG=b:37375693 Change-Id: Ic3c946e6cb12b3c8ef3e83a1037ed0fc8cffbded Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19323 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Provide baseboard and variant conceptsFurquan Shaikh
In order to be able to share code across different poppy variants, provide the concept of baseboard and variants. New directory layout: variants/baseboard - code variants/baseboard/include/baseboard - headers variants/poppy - code variants/poppy/include/variant - headers New boards would then add themselves under their board name within "variants" directory. This is purely an organizational change. BUG=b:37375693 Change-Id: If6c1c5f479cfffe768abf27495d379744104e2dc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19322 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Prepare sharing directory for variantsFurquan Shaikh
Clean up Kconfig file in order to support variants for poppy. Add BOARD_GOOGLE_BASEBOARD_POPPY that can be set by various poppy variants to use the common baseboard configs. BUG=b:37375693 Change-Id: I399ecc8c3efb3af26e1fcf60fe2c75b24769fc0f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19321 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mb/google/poppy: Add camera supportV Sowmya
Add camera related support * Enable the SA Imaging Unit and CIO2 devices. * Enable TPS68470 PMIC and populate related ACPI objects. * Enable OV cameras and populate related ACPI objects. * Enable Dongwoon AF DAC and populate related ACPI objects. BUG=b:36580624 BRANCH=none TEST=Build and boot poppy. Dump and verify that ACPI tables have the required entries for all the camera devices. Change-Id: Ifbe878bb6b25fc976e935fee16c4d59fadd47fe2 Signed-off-by: Sowmya V <v.sowmya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18969 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-04-19mb/google/poppy: Add Image Processing Unit ASLSowmya
This patch includes ipu.asl file in the main DSDT definition to add ACPI entries for IMGU and CIO2 devices. BUG=b:36580624 BRANCH=none TEST=Build and boot poppy. Dump and verify that DSDT table has the entries for IMGU and CIO2 devices. Change-Id: Ib7485315cb9468da7c6aa090862657a265121493 Signed-off-by: Sowmya V <v.sowmya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19110 Tested-by: build bot (Jenkins) Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-18mainboard/google/poppy: Clean up gpio.h fileFurquan Shaikh
1. Update formatting of gpio table to fit everything within 80 column limit. 2. PEN_RESET gpio is non-existent. Get rid of it. BUG=b:37375693 Change-Id: I1bcc4168659f365547e5f7227df8659e4bc7f243 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19320 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-18mainboard/google/poppy: Enable deep S3 in DC modeFurquan Shaikh
Enable lower power state when running on battery. Deep S3 is not enabled when in AC mode to support standard "docked" config. BUG=b:36087058,b:36723679 TEST=Verified following behavior with USB mouse: 1. If AC is connected when entering S3, USB mouse is able to wake up. 2. If AC is not connected when entering S3, USB mouse does not wake up. 3. If AC is connected when entering S3 and removed after entering S3, USB mouse does not wake up. 4. If AC is not connected when entering S3 and attached after entering S3, USB mouse does not wake up. Change-Id: I141a8d4779de004e27fcd9357cef787a38a27b24 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19276 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-17mainboard/asus/kgpe-d16: Remove obsolete reference to TPM ASL fileTimothy Pearson
TPM ACPI entries are automatically generated, and the old static TPM ASL file is obsolete. Remove the reference to this obsolete static ASL file. Change-Id: I3cb2a8a3ac337d1de8a3c394d7a28155597239d0 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/19283 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-04-17mb/lenovo/t60: Remove PCI reset code from romstagePaul Menzel
Commit bf264e94 (i945:) adds a PCI reset to the romstage, and commit bc8613ec (Fix i945 based boards) fixes that to use the correct delay of 200 ms. This code was then copied over, when adding support for the Lenovo T60. The reset was related to the shipped crypto card on the Roda RK886EX and Kontron 986LCD-M, so is not needed on the Lenovo T60. So remove it, to reduce the boot time by 200 ms. The same change is done for the Lenovo X60 in commit 7676730b (mb/lenovo/x60: Remove PCI reset code from romstage). Change-Id: Ifff43f095a1236c9e9a9ef0687e8efe42e72c971 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/19298 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-15google/slippy: fix internal mic for falco/wolf variantsMatt DeVillier
The HDA verb for falco/wolf's internal mic was wrong, preventing the mic from working properly in Windows and macOS (the Linux driver overrides the verb table, so wasn't affected). Set the verb connector/jack bits properly, to no connector / no jack detect, in order to fix. Also, make (2) small non-functional fixes: On falco, NID 0x1A was being disabled twice (instead of 0x1A and 0x1B both being disabled - copy/paste error). On wolf, NID 0x19 was set to an internal analog mic, where it should have been disabled (again, copy/paste error). Both these errors were introduced when consolidating/upstreaming and were not present in the original Chromium sources. Test: boot Windows [8/8.1/10] and verify mic functional with Realtek drivers on both falco and wolf. Change-Id: I9c343dda4762f0b1f814318c155e22c59d2da8db Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19262 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-15mainboard/google/eve: Remove 'probed' setting from rt5663 codecDuncan Laurie
Remove the 'probed' setting from the Realtek 5663 headset codec I2C device. This was added when we had a hardware issue that was preventing I2C operation because the clock/data lines were swapped. With new and/or reworked hardware this is no longer a problem and we do not want the I2C layer in the kernel to talk to the device before the rt5663 driver. BUG=b:35585307 BRANCH=none TEST=Boot on Eve and verify rt5663 driver still loads properly. Change-Id: Ice38889e8f5d3fd1307056cab10fbe3f4e197749 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19304 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-14google/slippy: clean up NGI and move to libgfxinitMatt DeVillier
- remove old, buggy NGI code from falco/peppy variants - remove superfluous INTEL_DP/INTEL_DDI configs, since already selected by northbridge/haswell - always use libgfxinit when use native init config selected - enable NGI/libgfxinit for all slippy variants The reset of the old Haswell NGI code will be cleaned up in a subsequent patchset. Test: select MAINBOARD_DO_NATIVE_VGA_INIT, observe panel init using SeaBIOS and Tianocore payloads on peppy, wolf variants Change-Id: Id5727cad7f714ffa57e77e2a25505e3c28f55237 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18824 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-14southbridge/via/vt8237r: Get rid of #include early_smbus.cLubomir Rintel
Use linker instead of '#include *.c'. The smbus_fixup() was changed not to use a structure that's defined by a northbridge since multiple different northbridges can be used. Instead the caller now directly passed the memory slot details. Change-Id: Ia369ece6365accbc531736fc463c713bbc134807 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/19082 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-14mainboard/google/eve: Remove ACPI ALS deviceDuncan Laurie
Remove the ACPI ALS device from the EC configuration because this system has an ALS that is presented through the new EC sensor interface rather than the legacy ACPI interface. BUG=b:37179776 BRANCH=none TEST=Boot an Eve device and ensure that 'acpi-als' device is not present in /sys/bus/iio/devices. Change-Id: Ie18b8a661e4d16464784ca8a227586036e7631de Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19265 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-14mainboard/google/eve: Set UART0 to skip initialization in FSPDuncan Laurie
Set UART0 to "PchSerialIoSkipInit" so the pins for this device are not set back to native mode by FSP when configured as GPIO input by coreboot. Now that FSP is not touching the pins I also removed the workaround to reconfigure the pins after FSP. BUG=b:35647877 BRANCH=none TEST=Verify that GPP_C8-GPP_C11 are configured as GPIO input once the OS is booted and they are not set back to native function by FSP. Change-Id: Ifec4fa3e66ceeb660bad00c66bc7bd44bb457a01 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19264 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-14mainboard/google/eve: Enable internal pull-down on USB_C{0,1}_DP_HPDDuncan Laurie
These lines act as inputs to both EC and AP and when the corresponding TCPC mux is in low power mode the line is floating. Add an internal pull-down to each GPIO to prevent it from floating in this state. BUG=b:35775012 BRANCH=none TEST=Verify that the kernel does not see a device present on DP when the TCPC mux is in low power mode. Change-Id: Ie229f84871e9994467c0ab660cc7e271a51d9cbb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19263 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-13mainboard/sapphire/pureplatinumh61: Enable EuP and PMENicola Corna
With EuP and PME enabled the USB power turns off during S5. Change-Id: I8b9fd7bb308f544401f90f8aa5ffaec61251b2b3 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/19073 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-04-13mainboard/google/reef: Configure sdcard card detect (CD) pin GPIO_177Venkateswarlu Vinjamuri
This configures GPIO_177 as native function. This enables OS to boot from sdcard. BUG=b:35648535 TEST=Check OS boot from sdcard. Change-Id: I73901d4a1b39752cbc452f3286d494587dac95d4 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/18948 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
2017-04-13mainboard/google/snappy: Increase weida touchscreen reset delayWisley Chen
Weida touchscreen controller needs 130 ms delay after reset BUG=b:35586513 BRANCH=reef TEST=Verified that touchscreen works on power-on and suspend/resume on snappy. Change-Id: I8418e742a69a2d6395baa2799a4da42a9bb5b312 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/19245 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-13google/eve: Disable Deep S3 in AC modeDuncan Laurie
In order to support a standard "docked" config disable Deep S3 when connected to AC power. This allows USB devices to wake the device from suspend if it is externally powered, but still retains the lower power state when running on battery. BUG=b:36723679 BRANCH=none TEST=manual testing on Eve for USB wake behavior: 1) when suspended on battery USB keyboard does not wake 2) when suspended while connected to AC a USB keyboard does wake 3) if suspended with AC, and then AC is removed, system does not wake with USB keyboard 4) if suspended without AC, and then AC is added, system does not wake with USB keyboard (it cannot get enabled without waking and re-suspending) Change-Id: I670e39d42cdb5b80612206da899be82ef3b2cbf2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19240 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-13google/eve: Enable WiFi SAR featureDuncan Laurie
Enable the Intel WiFi SAR feature for Eve, which will be used to provide wifi power tables based on values read from VPD. This is enabled based on CONFIG_CHROMEOS because it relies on the presence of VPD code from vendorcode/google/chromeos. BUG=b:36727652 BRANCH=none TEST=test on Eve by setting "wifi_sar" in VPD and ensuring that the ACPI WIFI device gets the expected "WRDS" and "EWRD" tables with the values that were set in VPD. Change-Id: I11c129baca891221177575108ac09ba1707b516e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19241 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-13soc/intel/skylake: Split AC/DC settings for Deep Sx configDuncan Laurie
Currently when enabling Deep S3 or Deep S5 it unconditionally gets enabled in both DC and AC states. However since using Deep S3 disables some expected features like wake-on-USB it is not always desired to enable the same state in both modes. To address this split the setting and add a separate config for Deep Sx in AC and DC states. All motherboards that set this config were updated, but there is no actual change in behavior in this commit. BUG=b:36723679 BRANCH=none TEST=This commit has no runtime visible changes, I verified on Eve that the Deep SX config registers are unchanged, and it compiles for all affected boards. Change-Id: I590f145847785b5a7687f235304e988888fcea8a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19239 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-13mainboard/google/poppy: Enable internal pull-down on USB_C{0,1}_DP_HPDFurquan Shaikh
These lines act as inputs to both EC and AP. Thus, add internal pull-downs to prevent them from floating. BUG=b:35648530 Change-Id: I42326c810775d5449e99e52e81870970247ce335 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19243 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-13mainboard/google/poppy: Add support for cr50 SPI TPMFurquan Shaikh
Put all configs required for enabling cr50 SPI TPM on poppy under POPPY_USE_SPI_TPM so that it can be enabled any time for testing SPI TPM on this board. Also, add required callback for irq status and devicetree config for GSPI0. BUG=b:36873582 Change-Id: I67793093c006c1325fc16f669a96126525f83243 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19238 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-11scarlet/gru: skip display because mipi driver not readyShunqian Zheng
Scarlet don't have eDP and MIPI driver is not ready, skipping display for now or else Scarlet would be stuck in reading eDP HPD because there even not power for it. TEST=boot to kernel on Scarlet Change-Id: I02ab4ef21bf77b98414f537aca57b46c11922348 Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/19237 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-11google/eve: Limit memory SKU 5 to 1600MHzDuncan Laurie
Due to issues with stability limit the SKU with K4EBE304EB-EGCF memory to 1600MHz instead of 1866MHz. BUG=b:37172778 BRANCH=none TEST=pass stress testing on devices with this memory Change-Id: I02af7e9c35e2c5b0b85223d58025cbd29841d973 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19227 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-10nb/amdk8/(pre_)f.h: Don't declare global variable in headerArthur Heymans
This is needed if one wants to use the header more than once. Change-Id: I375d08465b6c64cd91e7563e3917764507d779ba Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19029 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-10google/eve: Update I2C bus timingDuncan Laurie
Update the I2C rise/fall timings based on newly measured values on a new board with updated pull-up resistor values. Touchscreen: rise time 98ns, fall time 38ms Touchpad: rise time 111ns, fall time 41ns TPM: rise time 112ns, fall time 34ns BUG=b:35583133 BRANCH=none TEST=Each I2C bus frequency was verified on a scope to be ~400MHz Change-Id: Ibb3a15fa0cc862f36c1b9c63ac7847221020c4c0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19202 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-083rdparty/libgfxinit: Update submodule pointerNico Huber
Some renamings force us to update our code: * Scan_Ports() moved into a new package Display_Probing. * Ports Digital[123] are called HDMI[123] now (finally!). * `Configs_Type` became `Pipe_Configs`, `Config_Index` `Pipe_Index`. Other noteworthy changes in libgfxinit: * libgfxinit now knows about ports that share pins (e.g. HDMI1 and DP1) and refuses to enable any of them if both are connected (which is physically possible on certain ThinkPad docks). * Major refactoring of the high-level GMA code. Change-Id: I0ac376c6a3da997fa4a23054198819ca664b8bf0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18770 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-07intel/minnow3: Clean up Kconfig, devicetree and FMAPBrenton Dong
This patch cleans up the code by: o adding necessary default definitions to Kconfig o removing incorrect definitions from devicetree o removing irrelevant entries from FMD file devicetree.cb and minnow3.fmd carried over a lot of code from google/reef which is not correct for Minnow3 hardware. Minnow3 is not intended to boot Chrome OS and does not need Chrome related flash regions. The erroneous code is removed. These changes are the same as those done for leafhill in commit: 6a48923 mainboard/intel/leafhill: Clean up This was tested by building with the new configuration and booting to UEFI Payload Change-Id: I620dcbcd622f9326917c74b2a38984d9e49cff2b Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/18963 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-07mainboard/intel: Fix checkpatch errors in minnowmaxMartin Roth
This fixes the following issues, with no functional changes: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" ERROR:SPACING: space required after that ',' (ctx:VxV) WARNING:LONG_LINE_COMMENT: line over 80 characters WARNING:SPACE_BEFORE_TAB: please, no space before tabs ERROR:FUNCTION_WITHOUT_ARGS: Bad function definition ERROR:SPACING: space prohibited before that close parenthesis ')' WARNING:RETURN_VOID: void function return statements are not generally useful 2 unfixed issues: ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in parentheses Verified that the binary was the same before and after the changes. Change-Id: Ie9afb50e268f4140872e39fe8bede231a43d5cc6 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19078 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: York Yang <york.yang@intel.com>
2017-04-07nb/intel/i945: Move INTEL_EDIDPatrick Rudolph
All boards select INTEL_EDID, move it to nb folder. Change-Id: I35f075a87f2d841856b208f9440cf41af6a3c8e6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19086 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-07mb/lenovo/x201: Link gpio map instead of including a headerArthur Heymans
Linking should allow to link depending on possible future variants. E.g. in Makefile.inc romstage-$(CONFIG_'VARIANT0') += gpio_variant0.c etc. Change-Id: I88b5ef8e12ac606751952a493f626e1b146e98f7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19139 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-04-06northbridge/amd/stoney: Add FT4 packageMarshall Dawson
Add package options to the CPU Kconfig that may be selected by the mainboard's Kconfig file. Stoney Ridge is available in FP4 and FT4 packages and each requires a unique binaryPI image. Default to the correct blob used by the northbridge by looking at the CPU's package. Also modify Gardenia to select the right package. See the Infrastructure Roadmap for FP4 (#53555) and FT4 (#55349) for additional details for the packages. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 7b8ed7b732b7cf5503862c5edc6537d672109aec) Change-Id: I7bb15bc4c85c5b4d3d5a6c926c4bc346a282ef27 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18989 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-06amd/gardenia: Move OemPostParams() to correct fileKyösti Mälkki
The term 'callout' has a specific meaning in AGESA, meaning invoking the said function from AGESA / PI proper. OemPostParams() does not fall into that category. Change-Id: I0ad1cbf244501207af96e0ac415a5b80ced91052 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19141 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-04-06amd/bettong: Move OemPostParams() to correct fileKyösti Mälkki
The term 'callout' has a specific meaning in AGESA, meaning invoking the said function from AGESA / PI proper. OemPostParams() does not fall into that category. Change-Id: I45913d93323b3813fc35b1dd1fdca3d782d4b01f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19140 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-04-06gru: Initialize I2C bus for ARC2C0608Philip Chen
BUG=b:35583511 TEST=check i2c bus 0 initializes from ap console log Change-Id: Ibb6709159f5ed28ad0b62397d2ddb504dec55167 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/19105 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-06northbridge/via/cn700: Get rid of #include raminit.cLubomir Rintel
Using linker instead of '#include *.c'. Change-Id: Ie1bc538aa29c4f18dd6f31a83d3da58f196f2078 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/19081 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-05mainboard/google/reef: increase trackpad data hold timeAaron Durbin
Even though the i2c spec has no minimum data hold time in fast mode the trackpad vendor indicates 300ns is their minimum. However, the topology of the board uses FET isolation to cross voltage domains. Therefore, the default 300ns which should work isn't reflected on the device side of the voltage isolation circuit. Therefore, increase the data hold time to show an observed data hold time of more than 300ns on the device side. BUG=b:36469182 Change-Id: I1b70f2f53c5a29cc7cfd5035a71ca5811b3bcba0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19065 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-05mainboard/google/poppy: Change SD card detect to GPP_E15Furquan Shaikh
SD card detect pin is moved to GPP_E15 in the next build. Update device tree and gpio config accordingly. BUG=b:36012095 Change-Id: Ic0ff72cdcb0f1ca27abc7eb8da9ccd8a21b28522 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19107 Tested-by: build bot (Jenkins) Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.corp-partner.google.com>
2017-04-04siemens/mc_apl1: Activate PTN3460 eDP to LVDS bridge ICMario Scheithauer
This mainboard uses a LVDS connection for LCD panels. Apollo Lake SoC provides a display controller with three independent pipes (1x eDP and 2x DP/HDMI). PTN3460 is an embedded DisplayPort to LVDS bridge device that enables connectivity between an eDP source and LVDS display panel (http://www.nxp.com/documents/data_sheet/PTN3460.pdf). The bridge contains an On-chip Extended Display Identification Data (EDIT) emulation for EDIT data structures. This patch sets up PTN3460 to be used with the appropriate LCD panel. Change-Id: Ib8fa79bb608f1842f26c1af3d7bf4bb0513fa94d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19043 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-03bap/ode_e20XX: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I79d4a4d1d5966ab46c8a9b9e9ca4e09e21ecfea7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18717 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-29amd/olivehill: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I074dc7d5edbe3444f841e67a5644938e23118942 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18716 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-29asrock/imb-a180: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I00bd4d895b2585235bf5b3edd23fbcddba69d31e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18714 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-29siemens/mc_apl1: Adjust gpio settingsMario Scheithauer
Adjust gpio settings according to the hardware layout. Change-Id: I2f440e863c2e6f59298c500ac5aefa3b7386bcdf Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/18995 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-03-29mainboard/google/reef: turn off DMIC_CLK_B1 in S0ixSathyanarayana Nujella
Wake On Voice stream capture configuration is mono. It is sufficient to keep DMIC_CLK_A1 on in S0ix; so, turning off DMIC_CLK_B1. Power saving should be visible in the boards which has more than one DMIC connected. BUG=None BRANCH=None TEST=WoV and quad channel DMIC capture works Change-Id: Ic46d4c7b30b945eba47a05d78386f48e4a675a03 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/19018 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Tested-by: build bot (Jenkins)
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28chromeos / broadwell / jecht: Make save_chromeos_gpios() jecht-specificJulius Werner
This callback was only required for a single mainboard, and it can easily be moved to mainboard-specific code. This patch removes it from the global namespace and isolates it to the Jecht board. (This makes it easier to separate vboot and chromeos code in a later patch.) Change-Id: I9cf67a75a052d1c86eda0393b6a9fbbe255fedf8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18981 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
The virtualized developer switch was invented five years ago and has been used on every vboot system ever since. We shouldn't need to specify it again and again for every new board. This patch flips the Kconfig logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the latter for Lumpy which seems to have been omitted incorrectly, and hide it from menuconfig since it's a hardware parameter that shouldn't be configurable.) Since almost all our developer switches are virtual, it doesn't make sense for every board to pass a non-existent or non-functional developer mode switch in the coreboot tables, so let's get rid of that. It's also dangerously confusing for many boards to define a get_developer_mode() function that reads an actual pin (often from a debug header) which will not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set. Therefore, this patch removes all those non-functional instances of that function. In the future, either the board has a physical dev switch and must define it, or it doesn't and must not. In a similar sense (and since I'm touching so many board configs anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC. Instead, it should just be assumed by default whenever a Chrome EC is present in the system. This way, it can also still be overridden by menuconfig. CQ-DEPEND=CL:459701 Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18980 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Remove VBOOT_DYNAMIC_WORK_BUFFER Kconfig optionJulius Werner
VBOOT_DYNAMIC_WORK_BUFFER and VBOOT_STARTS_IN_ROMSTAGE are equivalent in practice. We can't have a dynamic work buffer unless we start in/after romstage, and there'd be no reason to go with a static buffer if we do. Let's get rid of one extra option and merge the two. Change-Id: I3f953c8d2a8dcb3f65b07f548184d6dd0eb688fe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18979 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Select SoC-specific configuration for all Chrome OS boardsJulius Werner
Some Chrome OS boards previously didn't have a hardcoded vboot configuration (e.g. STARTS_IN_BOOTBLOCK/_ROMSTAGE, SEPARATE_VERSTAGE, etc.) selected from their SoC and mainboard Kconfig files, and instead relied on the Chrome OS build system to pass in those options separately. Since there is usually only one "best" vboot configuration for a certain board and there is often board or SoC code specifically written with that configuration in mind (e.g. memlayout), these options should not be adjustable in menuconfig and instead always get selected by board and SoC Makefiles (as opposed to some external build system). (Removing MAINBOARD_HAS_CHROMEOS from Urara because vboot support for Pistachio/MIPS was never finished. Trying to enable even post-romstage vboot leads to weird compiler errors that I don't want to track down now. Let's stop pretending this board has working Chrome OS support because it never did.) Change-Id: Ibddf413568630f2e5d6e286b9eca6378d7170104 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19022 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28lenovo/g505s: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I857486cb80bc01e695ac9592a0a0dc577dfc0d12 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28msi/ms7721: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I0322fb69455cf6e196c0f6c6221bef806f1aa989 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18713 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28amd/torpedo: Switch away from AGESA_LEGACYMartin Roth
Change-Id: Id074f3656801d412efb9485a6e2578beb9782259 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/18994 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-28asus/f2a85-m: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I7ba328c73f5fb44e50f00cb93db4f7ac8afbfdc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18712 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28elmex/pcm205400: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I5181af1b8a779faa8821eb5cbac30542b5ff6ec7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18711 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28asrock/e350m1: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I335494b3339f2e5da7b1b0483b557a6eb211dfc1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18710 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28pcengines/apu1: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I4bc357b202e6fc769dd4964a4bb774897e9fd20b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18709 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28gizmosphere/gizmo: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Iab25dfb4811a325e66757c3969db1766a29ecd7f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18708 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28AGESA: Introduce AGESA_LEGACY and its counterpartKyösti Mälkki
We define AGESA_LEGACY as an implementation of mainboard that has its romstage main completely under mainboard/ directory. We have learnt from other platforms this approach has several downsides when it comes to making platform-wide improvements. We start by creating per-family romstage.c file, which boards will gradually take into use by removing the AGESA_LEGACY Kconfig option we here apply to all of them. Change-Id: Id01931e185a023039a60af16a678de9966db8d65 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18619 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-27mainboard: Add Sapphire Pure Platinum H61Nicola Corna
This board has a socketed SOIC-8 4 MB flash chip. All the flash regions are unlocked by default but unfortunately flashrom doesn't work with the original firmware and the stock UEFI flash tool refuses to flash the coreboot image (different image ID). For now, the external programmer seems to be the only option for the first coreboot flashing. Tested and working: * Debian GNU/Linux Stretch (with Linux kernel 4.9, SeaBIOS) * Microsoft Windows 7 installer with VGA blob (SeaBIOS) * Internal GPU, both with VGA blob and libgfxinit (VGA and DVI) * External GPU * RAM (tested 8 + 8 GB) * S3 * USB, both the 2.0 and 3.0 ports * Sata * Thermal management * Sound * LAN * Bluetooth * VT-x and VT-d * me_cleaner Not working: * Microsoft Windows 7 installer with libgfxinit Untested: * Backside Mini PCI-E port * DisplayPort and HDMI ports Issues: * The USB is always powered, even is S3 and S5 (like in the original firmware). * Internal flashing with flashrom doesn't work after resuming from S3. * The raminit is unreliable, as the RAM training sometimes fails and sometimes succeeds, with the same couple of RAMs. Once a MRC cache has been created, the raminit works fine. * If an external card is inserted and the option ONBOARD_VGA_IS_PRIMARY is not enabled, the internal GPU disappears completely from the PCI bus. Change-Id: I76aca2cfc4708c1728ae03ee4f6bc59d976c28a0 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18564 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-03-27ec: Use EC_ENABLE_LID_SWITCH for all mainboards with LID using chromeecFurquan Shaikh
Instead of defining a separate LID device for mainboards using chromeec, define EC_ENABLE_LID_SWITCH for these boards. Change-Id: Iac58847c2055fa27c19d02b2dbda6813d6dec3ec Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-27mainboard/google/rambi: Move SIO_EC_ENABLE_PS2K to onboard.hFurquan Shaikh
Instead of defining SIO_EC_ENABLE_PS2K by default for all boards and doing an undef in variant/onboard.h, move the definition of SIO_EC_ENABLE_PS2K to variant/onboard.h. This avoids dependency between different *.asl files. Change-Id: I83e4ce42a594e952a443c618d7ef9840113027b9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18965 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-26mb/lenovo/s230u: Fix USBDEBUG checkMartin Roth
- Change preprocessor #if to standard C if. This will get optimized out if the config option is disabled, but lets the compiler check the contents. - CONFIG_USBDEBUG is always going to be defined even if it's disabled, so this check is not going to work as expected. See the coreboot Kconfig documentation in /Documentation/core/Kconfig.md Change-Id: Ia63438d9525e79307d9229ad3ffa2962978611d8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18974 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins)
2017-03-24mainboard/google/snappy: Update DPTF settingsWisley Chen
1. Remove CPU throttling effect of the charger sensor Refers Change-Id I267b6e07fa9def2c91ff9f6035f2d9437faf1965 (mb/google/reef: Remove CPU throttling effect of the charger sensor) to remove CPU throttling effect of the charger sensor since it's not relevant to throttle CPU based on the charger sensor. 2. Change TSR1 influence from 200 to 100 3. Change TSR2 sample period from 120s to 30s BUG=b:35585781 BRANCH=reef TEST=built, and verified on snappy by thermal team. Change-Id: Ic3fc51c4288b24f4e64950e5b148aed4495a1c3b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18950 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-03-23google/fizz: Update device tree from schematicShelley Chen
BUG=b:35775024 BRANCH=None TEST=Compiles successfully Change-Id: I92cf9baa4c3aefc6983511543d875e74a6b0bf94 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/18944 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-23google/fizz: Transfer gpio from schematicShelley Chen
Transfer the gpio assignments in the fizz schematic into gpio.h. BUG=b:35775024 BRANCH=None TEST=./util/abuild/abuild -p none -t google/fizz -x -a Change-Id: If05aa2859f2511c3f616dc3fb38bca4fb8524697 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/18797 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-23google/fizz: Remove poppy-specific configsShelley Chen
- Remove spd files/directory - Remove audio blobs - Remove dptf.asl contents - Remove MKBP - Remove acpi table initialization BUG=b:35775024 BRANCH=None TEST=Compiles successfully Change-Id: I5d717d23224956ee1653c5ded28abd05cd254c3a Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/18857 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-23google/fizz: Add new boardShelley Chen
Creating google/fizz directory based on poppy (using kabylake and FSP 2.0). Only making name changes and Copyright year changes. Many poppy-specific configs left in and will be updated in follup CLs. BUG=b:35775024 BRANCH=None TEST=Compile fizz board Change-Id: Icab3639a53fef65e904e797028916fda879fff7c Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/18796 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-23mainboard/samsung/stumpy: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/samsung/stumpy. Change-Id: Ie6209b3b40d9aad0723690e7aeb3edfd0bfcc4a8 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17304 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-23mainboard/samsung/lumpy: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/samsung/lumpy. Change-Id: I39fe6bad42b3b0772d09d0fa7af357b797b8e04f Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17303 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-23mainboard/technexion/tim5690: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/technexion/tim5690. Change-Id: I661daa5ab34c70db8ed783e5bf1114877f13b548 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17307 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-22mainboard/google/reef: add nasher variantYH Lin
Create the initial Nasher variant which refers to the Reef. Nasher is APL board that derives from reference board Reef. BRANCH=master BUG=b:36389286 TEST=Build (as initial setup) Signed-off-by: YH Lin <yueherngl@chromium.org> Change-Id: I7962aa8246890149988c7f02dcd90d820df7b901 Reviewed-on: https://review.coreboot.org/18928 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-21google/pyro: Update DPTF settingsKevin Chiu
1. correct DPTF TCHG target device to TSR2 2. Refers Change-Id I267b6e07fa9def2c91ff9f6035f2d9437faf1965 (mb/google/reef: Remove CPU throttling effect of the charger sensor) to remove CPU throttling effect of the charger sensor since it's not relevant to throttle CPU based on the charger sensor. BUG=b:35586881 BRANCH=reef TEST=emerge-pyro coreboot Change-Id: I4801e0e612e0ddf90764ffe080c679818d33212a Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/18920 Tested-by: build bot (Jenkins) Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-21mainboard/google/poppy: Use sideband IRQ for SD Card DetectFurquan Shaikh
Since SD card controller is expected to enter D3hot by runtime power management if there is no card inserted, we need to use a sideband IRQ pin which is not under the control of the controller. Thus, configure GPP_A7 as the sideband IRQ pin and pass it to OS as the card detect pin. BUG=b:35586693 BRANCH=None TEST=Verified on a reworked poppy board that card detect works fine. Change-Id: I4512f5d7829583e27c9750463396eaffbc5702b4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18926 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-21mainboards: Don’t select `CONSOLE_POST`Paul Menzel
Currently, it’s impossible for the user to select `NO_POST`, for boards selecting `CONSOLE_POST` in their config. ``` warning: (BOARD_SPECIFIC_OPTIONS) selects CONSOLE_POST which has unmet direct dependencies (VENDOR_SIEMENS && BOARD_SIEMENS_MC_BDX1 || !NO_POST) ``` This is currently done for Intel Camelback Mountain and Siemens MC-BDX1. Selecting the option `CONSOLE_POST` in board specific configuration is not a good idea, as this should be user configurable over Kconfig, and also the tree-wide defaults should be the same for these options. Kconfig is different, as commit 97535558f1 (mainboard/{google,intel}: Change config option selection) only touch the Intel board. Change-Id: I91c1e0cb92ed218b6bbc7c33759b91f748cf6f51 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18878 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-03-21mainboards: Don’t select `POST_IO`Paul Menzel
Currently, it’s impossible for the user to select `NO_POST`, for boards selecting it in their config. ``` warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS) selects POST_IO which has unmet direct dependencies (VENDOR_ASUS && (BOARD_ASUS_F2A85_M || BOARD_ASUS_F2A85_M_PRO || BOARD_ASUS_F2A85_M_LE) && (BOARD_ASUS_F2A85_M || BOARD_ASUS_F2A85_M_PRO) || VENDOR_MSI && BOARD_MSI_MS7721 || PC80_SYSTEM && !NO_POST) ``` This is currently done for Intel Mohon Peak, and its descendants. Selecting the option `POST_IO` in board specific configuration is not a good idea, as this should be user configurable over Kconfig, and also the tree-wide defaults should be the same for these options. Change-Id: Ia4ab0d942b7d66f18466a770ef739109ab0db629 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18877 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-21southbridge/nvidia/mcp55: Get rid of #include early_smbus.cArthur Heymans
Using linker instead of '#include *.c'. Change-Id: I74dfa99c8bb3f4ca7ef3d774be2197897022f52c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18484 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 22:27:02 +0000