summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-03-06mainboard/ocp: Add support for OCP platform TiogaPassJonathan Zhang
OCP platform Tiogapass is a 2-socket server platform, which is based on a chipset including Intel Skylake-SP processors and a Lewisburg PCH. Skylake-SP is a processor in Intel Xeon Scalable Processor family. Following ACPI tables are added: DSDT/SSDT, MADT, FACP, FACS, HPET, MCFG, SLIT, SRAT, DMAR This patchset is tested on a Tiogapass board. It booted with Linux kernel 4.16.0; lscpu command shows all 72 cpus (2 sockets, 18 cores, 2 thread per core); ssh command shows networking is up from Mellanox ConnectX-4 PCIe NIC card. Towards successful gerrit buildbot build, note that: * microcode is in coreboot intel-microcode submodule repo. * IFD binary is included in this patch. * Dummy ME binary is used, as it may take long time for Intel ME binary to be available in public domain. * Fake FSP binary is used, as at this moment the SKX-SP FSP binary is not going to be available in public domain. Known issues (Not intend to address in this initial support for Xeon-SP processors): * c6 state is not supported. * dsdt table is not fully populated, such as processor/socket devices, some PCIe devices. * SMM handlers are not added. Following are some command execution with CentOS booted from local SATA disk: [root@localhost ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 72 On-line CPU(s) list: 0-71 Thread(s) per core: 2 Core(s) per socket: 18 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 85 Model name: Intel(R) Xeon(R) Gold 6139 CPU @ 2.30GHz Stepping: 4 CPU MHz: 140.415 BogoMIPS: 4626.46 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K L3 cache: 25344K NUMA node0 CPU(s): 0-17,36-53 NUMA node1 CPU(s): 18-35,54-71 [root@localhost ~]# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.23.68.190 netmask 255.255.0.0 broadcast 172.23.255.255 inet6 2620:10d:c082:9063:268a:7ff:fe57:5af0 prefixlen 64 //cut inet6 fe80::268a:7ff:fe57:5af0 prefixlen 64 scopeid 0x20<link> inet6 2620:10d:c082:9063::5d2 prefixlen 128 scopeid 0x0<global> ether 24:8a:07:57:5a:f0 txqueuelen 1000 (Ethernet) RX packets 84249 bytes 6371591 (6.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8418 bytes 748781 (731.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 613 bytes 63906 (62.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 613 bytes 63906 (62.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]# cbmem 36 entries total: // Lines were cut to avoid checkpatch.pl warnings Total Time: 96,243,882,140,175,829 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Tested-by: johnny_lin@wiwynn.com Change-Id: I29868f03037d1887b90dfb19d15aee83c456edce Reviewed-on: https://review.coreboot.org/c/coreboot/+/38549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-06mb/lenovo/x230: List Lenovo X230t convertible/tablet as variantPeter Lemenkov
Lenovo ThinkPad X230t Convertible Laptop works well with X230 default image (see CB:34361). Change-Id: Ib0a73fd551f0d26c789d3fd13541b2d1571742cb Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38482 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/lenovo: Remove thermal.h headerPeter Lemenkov
We include it only in one file. So let's simplify everything and do like autoport does. Change-Id: I71f092ed7582b4931122d72f41d0b42a7569b96e Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-06mb/intel/tglrvp: Enable Audio AIC with Max98373 & ALC5682 on TGLSrinidhi N Kaushik
Add support for Max98373 speaker amp & ALC5682 headset codec BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I013dbc6246b07a501f9bff80c2bca3594e6cc146 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-06mb/up/squared: move USB config to device treeMaxim Polyakov
Change-Id: Ic4db37112e7b2329f9e4885139deca12557ffe3a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39134 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/up/squared: remove NpkEn option from romstageMaxim Polyakov
There is no need to set the NpkEn option to disable the NPK device, since it has already been done in the devicetree. Change-Id: I429f1129dc4149067503cd2ff9fb4c76cdc919f0 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-06mb/google/volteer: add new ripto variantNick Vaccaro
Add a new ripto variant based off of the volteer baseboard design. BUG=b:148385924, b:150810535 TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto image and verify ripto boots to the kernel. Change-Id: If7606588147500a465f16c7846e2c8429ece93ec Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-03-06mb/google/volteer: make variant_early_gpio_table weakNick Vaccaro
Declare variant_early_gpio_table() weak to allow override by variants. BUG=b:148385924, b:150810535 TEST=none Change-Id: Ife5e3b75256f71ecd763c4000fd2c7d7c927bb64 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39300 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/lenovo/*: Add support for VBOOT on 12MiB devicesJonas Moehle
Enable VBOOT support on all devices that have a 12 MiB flash, using RW_MAIN_A + RW_MAIN_B partition, allowing the use of tianocore payload in both RW_MAIN_A, RW_MAIN_B and WP_RO. * Add VBNV section to cmos.layout * Add FMAP for VBOOT * Select Kconfigs for VBOOT * Enable VBOOT_SLOTS_RW_AB by default The VBNV is intentionally not covered by the CMOS checksum. Tested on x230 and T440p. Change-Id: I8a35a06ece1e9d57a2ef23970e61ae26fafce543 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Jonas Moehle <ad-min@mailbox.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-03-06mb/google/hatch/puff: Enable VBOOT_EC_EFSSam McNally
If the ChromeOS EC uses EC early firmware selection (EFS), the AP vboot build must also enable EC EFS. Puff EC uses EFS, so enable it in the AP vboot build. BUG=b:150742950 TEST=Puff can boot with EC EFS with hardware write protect enabled BRANCH=none Signed-off-by: Sam McNally <sammc@chromium.org> Change-Id: I0877000b7d277106436831f2d69775c25299da9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-04src/mainboard/lenovo/t530/Kconfig: Fix PCI device id for the iGPUPrasun Gera
Both T530 and W530 share the same PCI device id of 0166 for the iGPU. Change-Id: Idce809e3820a653144db424aff1c55b70c4c693a Signed-off-by: Prasun Gera <prasun.gera@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-04mb/lenovo/t530/devicetree: Select docking_supportedPeter Lemenkov
Looks like it should select it like any other Lenovo xx20/xx30 boards around. UNTESTED. Change-Id: Iaa4983c0a6365d77ac647f68d112a405d782d501 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-04mb/lenovo/t530/devicetree: Drop unnecessary initializationPeter Lemenkov
These two variables are initialized to zero by default. Change-Id: I590f601b5297a9bfa93607442d7e0b8d79f1ab51 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-04mb/lenovo/[tw]530/devicetree: Fix comment about chip codenamePeter Lemenkov
Change-Id: I3323e713970041b0665ca17bbcad985cba600687 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-04mb/lenovo/t530/*/*/devicetree: Align whitespace and comments across the boardsPeter Lemenkov
Only whitespace changes, minor comments. This helps making diff between devicetrees shorter. Change-Id: Ia1a84728abbece96a3d05b3b1616ac58535845bc Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-04src: capitalize 'PCIe'Elyes HAOUAS
Change-Id: I55bbb535372dc9af556b95ba162f02ffead2b9e2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-04src/ec,mainboard: Move weak smbios_system_sku() override inwardsEdward O'Callaghan
Internalise smbios_system_sku() strong symbol inwards in the ec_skuid.c implementation and simply wrap a call to: google_chromeec_smbios_system_sku(). BUG=b:150735116 BRANCH=none TEST=none Change-Id: I05ebfc8126c0fb176ca52c307c658f50611ab6ab Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39146 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-04mainboard/google/dedede: Migrate onto SKU ID/fw_config helpersEdward O'Callaghan
Leverage the common sku id space helper encoders. dedede uses the non-legacy SKU ID space. squash in, mainboard/google/dedede: Migrate onto get fw_config helper BUG=b:149348474 BRANCH=none TEST=only tested on hatch Change-Id: I0c21a748fddef0985022cb4e77a8db95d6692f4b Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-04mainboard/google/octopus: Migrate onto SKU ID helpersEdward O'Callaghan
Leverage the common sku id space helper encoders and set the sku id max to 0xff for legacy to ensure we behave the same. BUG=b:149348474 BRANCH=none TEST=tested on hatch Change-Id: I60a37a5f9659b8df4018872956f95e07a3506440 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-03-03mb/asrock/h110m: Explain why some SATA ports are emptyMaxim Polyakov
Change-Id: Ib0a24fab22ee082367b82b3e8ee7383f1f02a4ad Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-03mb/google/drallion: Enable cbfs SAR valueEric Lai
Enable read SAR value from cbfs. BUG=b:150347463 TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5f27b6f7245669728e3e394e9c6a39c11bfda3b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
2020-03-03treewide: Replace BOARD_EMULATION_QEMU_X86Angel Pons
It is equivalent to the CPU_QEMU_X86 symbol. Change-Id: Ic16233e3d80bab62cc97fd075bdcca1780a6a2b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-03mb/emulation/Kconfig: Redefine BOARD_EMULATION_QEMU_X86Angel Pons
Use CPU_QEMU_X86 as it is selected by both Qemu x86 mainboards. Change-Id: I8d6bfbddeeb8f2c66c5ea7728a9919e7cda86e7e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-03mb/*/Kconfig: Factor out MAINBOARD_VENDORAngel Pons
Only some mainboard vendors have a prompt for this option. Let's be fair and give this ability to everyone. Change-Id: I03eec7c13d18b42e3c56fb1a43dc665d5dbd1145 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-03mb/Kconfig: Align ROM size optionsAngel Pons
Change-Id: I0160e72a8961f1aa34982f6348825708e7be9c40 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-03LGA1155 mainboards: Remove gfx.did and gfx.ndidAngel Pons
They are downright useless and result in ACPI errors. So, burn them. Also, do a minor update to autoport's README about these values. Change-Id: Idb5832cfd2e3043b8d70e13cbbe8bd94ad613120 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-03mb/google/dedede: Add memory initialization support for dededeMeera Ravindranath
Update memory parameters based on memory type supported by dedede 1. Update dq/dqs mappings 2. Update spd data for Micron Memory 3. Add SPD data binary files for supported memory types 4. Update other FSPM UPDs as part of memory initialization BUG=none BRANCH=none TEST=Build dedede, flash and boot to kernel. Change-Id: I7248861efd1ecd5a0df0e17d39a44c168cab200e Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39136 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-02mb/google/kohaku: Add LPDDR 16G 2133 supportSeunghwan Kim
BUG=b:149775711 BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: I856d7b361e70b657966cd4036c79f2fedfabb766 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39126 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-02mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. This follows commit 408d1dac9e23250c0e485bbf934771f769b717c1. Change-Id: I0c0f4ad8bf743010ebdd2d53fcf297aeab64a662 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-02mb/**/dsdt.asl: Remove "Some generic macros" comment, againAngel Pons
It provides no useful information, so it might as well vanish. This follows commit 0142d441c63a9bb1a7955ea0ba764a2ddbc38d48. Change-Id: Iad41d8d39c6712cebfa5245f37bc69061b5ac552 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-02nb/intel/sandybridge: Fix VBOOTPatrick Rudolph
The VBOOT code can be compiled but it asserts with: ASSERTION ERROR: file 'src/security/vboot/common.c', line 40 Start VBOOT in bootblock to fix the assertion. Tested on Lenovo X220: The assertion is gone, the platform boots again. Change-Id: I48365e911b4f43aecba3b1f950178b7ceed5b2e9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-02mb/google/octopus: support new Elan touch panel for FoobTommie
This is new elan touch screen IC, which includes touch panel and USI pen. BUG=b:149800883 BRANCH=octopus TEST=build bios and verify touch screen works fine Signed-off-by: Tommie Lin <tong.lin@bitland.corp-partner.google.com> Change-Id: Ibec3d08cc740e398a10a5c845181318724afc70a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-03-02mb/google/hatch/var/jinlon: Disable EPS on some SKUsRajat Jain
Disable EPS on the SKUs that do not have it. Change-Id: I7305097beea3484634933ab856fd084933868a10 Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-03-02mb/google/hatch/var/jinlon: Enable gfx/generic driverRajat Jain
Enable the GFX device for Jinlon. Change-Id: I6ba90bf464e315ec364b6f35e7670924a2aba25a Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-03-02mb/emulation/qemu-aarch64: Add ARM trusted firmware supportPatrick Rudolph
Linux expects a working PSCI and hangs if not found. Add BL31 into CBFS as '-M virt,secure=on -bios ' commands line arguments cause qemu's internal PSCI emulation to shutdown. BL31 is placed in qemu's SECURERAM memory region and won't conflict with resources in DRAM. Tested on qemu-system-aarch64: Fixes a hang and allows to boot into Linux 5.4.14 userspace. Change-Id: I809742522240185431621cc4fd8b9c7deaf2bb54 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-02mb/emulation/qemu-aarch64: Add MMU supportPatrick Rudolph
Enable MMU in bootblock. Makes qemu look more similar to real hardware. There's no real need to activate the MMU. Tested on qemu-system-aarch64: 5 page entries are used out of 32. Change-Id: Ifaed9d3cc11520f180a732d51adce634621b5844 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38534 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-02superio/nuvoton/npcd378: Switch to superio/commonPatrick Rudolph
Replace DSDT ACPI code and DSDT injection with a SSDT only solution. The current implementation shows some issues on current Linux, which might be due to external ACPI objects, which are then injected into DSDT or the fact that those objects only use 3 characters. Replace all the DSDT code with an SSDT generator. Tested on HP Z220: Boots into Linux with no ACPI errors. The SSDT can be disassembled. Change-Id: I41616d9bf320fd2b4d8495892b8190cd2a2d057f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-02-28mainboard/google/volteer: Migrate onto SKU ID helpersEdward O'Callaghan
Leverage the common sku id space helper encoders. volteer uses the non-legacy SKU ID space. BUG=b:149348474 BRANCH=none TEST=only tested on hatch Change-Id: Ic66908afb7abb34527b4177cfd07f03ad718317c Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-28mainboard/google/hatch/puff: Toggle on TetonGlacierModeEdward O'Callaghan
Leverage in Puff to avoid diskswap variants. Later this could become part of the baseboard definition and hatch diskswap variants migrated over to use it as well. BUG=b:149171631 BRANCH=none TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration on Puff. Change-Id: Ie87f0823f28457db397d495d9f1629d85cfd5215 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-28mainboard/google/hatch: Migrate onto SKU ID helpersEdward O'Callaghan
Leverage the common sku id space helper encoders. BUG=b:149348474 BRANCH=none TEST=tested on hatch Change-Id: I96e10010fd375b127f1e10387d6f7a839bc35fdd Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39019 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-27mb/google/hatch/var/jinlon: Configure GPP_E0 as outputRajat Jain
Configure GPP_E0 as output for view angle management Change-Id: Iad640eed855b47e365da55fa994c6a3c4c38caf9 Signed-off-by: Rajat Jain <rajatja@google.com>. Reviewed-on: https://review.coreboot.org/c/coreboot/+/39144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-02-27mb/google/dedede: configure ESPI IO decode range for chrome ECAamir Bohra
Configure below ESPI IO decode ranges: 1. 0x200-020F: EC host command range. 2. 0x800-0x8FF: EC host command args and params. 3. 0x900-0x9ff: EC memory map range. Change-Id: I1e450d6e45242180de715746b9852634de2669c6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-02-27mb/google/dedede: Enable display supportAamir Bohra
1. Enable Internal Gfx device. 2. Configure DDI0 for EDP. 3. Configure HPD and DDC suppport for DDI1/DDI2. 4. Configure HPD GPIOs. TEST=Verify display on EDP panel in OS Change-Id: Ia53428af549ba01ab539f9474a6e5e79b72dff5c Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39132 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-26mb/google/hatch: reflow commentPatrick Georgi
Change-Id: I8c721c7ccba4f87d4acb9dae74213a46151fe2ed Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-26mb/intel/tglrvp: add Tiger Lake memory initialization supportSrinidhi N Kaushik
Update memory parameters based on memory type supported by Tiger lake RVP 1. Update dq/dqs mappings 2. Update spd data for Tiger lake LPDDR4 SAMSUNG/MICRON memory 3. Add SPD data bin files for supported memory types 4. Update other FSPM UPDs as part of memory initialization BUG=none BRANCH=none TEST= build tglrvp flash and boot to kernel Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I7248862efd1dcd5a0df0e17d39b44c168caa200e Reviewed-on: https://review.coreboot.org/c/coreboot/+/38998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-02-26mainboard/hatch: Fix GPE wake commentsEdward O'Callaghan
The indirection of names is exceedingly confusing for ultimately the single interrupt trace of EC_PCH_WAKE_ODL between the EC gpio#74 to GPD2/LAN_WAKE# on the PCH side. This helps folks chase this indirection down through the code. BUG=b:147026979 BRANCH=none TEST=builds Change-Id: I35d746a202dae06d2f6f1edfaa3889864b09f50d Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-26mb/google/dedede: Update GPE configurationKarthikeyan Ramasubramanian
WWAN wake event is routed to GPP_D0 GPIO and Pen Detect wake event is routed to GPP_C12 GPIO. Update the GPE configuration accordingly. BUG=None TEST=Build the mainboard. Change-Id: Id36d2c8265a0b7ea241565f6bb723df6b37446fa Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-02-26treewide: capitalize 'USB'Elyes HAOUAS
Change-Id: I7650786ea50465a4c2d11de948fdb81f4e509772 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39100 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-26mb/google/dedede: Enable host bridge deviceAamir Bohra
Change-Id: Ie47265527b2b81748f4f3ad744d35cb81af17b80 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-02-26mb/google/fizz: allow 8 bit sku idsJeff Chase
Change-Id: I663678a4c572fe80298f7388870d5cd403122b98 Signed-off-by: Jeff Chase <jnchase@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2020-02-25mb/hp: Set CBFS_SIZEPatrick Rudolph
Overwrite the default of 1 MiB with the actual bios region size set in the stock IFD. Allows to use payloads like TianoCore without manually touching the CBFS_SIZE. Change-Id: Ic1753a38212cc4961671fea11afe88265e73333b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39073 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-25mb/supermicro/x11-lga1151-series: fix PNP warning for SUART1/2Michael Niewöhner
Fix PNP warning about missing devicetree entry for SUART1/2 by setting register 0xF0 to a sane (default) value. Change-Id: Ie852696aae09b9b03cebd6c3d8cbbd53a7138d89 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-02-25mb/supermicro/x11-lga1151-series: fix GPIO reset mappingMichael Niewöhner
When specifying _PAD_CFG_STRUCT with raw hex values, a logical reset value of 0x0 is only defined for GPD pads. For any other GPIOs this maps to 0x3. On the Supermicro X11 boards a value of 0x0 is set for GPP_D22 and GPP_F23, triggering the error "gpio_pad_reset_config_override: Logical to Chipset mapping not found". Set the right value (0x3<<30) for the affected GPIOs. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I3ae17dfc4d90f88f5b8bc5bee49740745778a91a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-02-25mb/amd/samba: Drop board leftoverElyes HAOUAS
lippert/hurricane-lx doesn't exist anymore (see Change-Id: I87e3963). Change-Id: I6d1c3a846c5bbb5fdc74178d0cf8a3cdaae1a010 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39076 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/amd/inagua: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I55bf3004c728bb42ee51dfa917c58d97c56502cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/38876 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24gizmosphere/gizmo2: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Iad86755952204bb1a56ef341e626b0627a958467 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38868 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/elmex/pcm20540*: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I53b80fe97370c99968f073dfad61b5e5709e4ab6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38870 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/amd/union_station: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I0edfc7bb6d01eb1a12299fddd3d3ac45b43edfdb Reviewed-on: https://review.coreboot.org/c/coreboot/+/38875 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/lippert/frontrunner-af: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I63dd15ade28acb06da8d320edc8ae1fd433aa0e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-24mb/amd/thatcher: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I948eeaaeb7975561fffc1218c70dba6a784101fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/38877 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/amd/south_station: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Iba1d020b9e565e3c6c89a97114084d72a00b2a55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38871 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/bap/ode_e20XX: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: not tested on hardware. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I37a1a95bdf07d99916247095a5bc3ac5349cd98f Reviewed-on: https://review.coreboot.org/c/coreboot/+/38869 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/lippert/toucan-af: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I22774a6d6a32c2fb8340f5ac678befe0d5f8ad75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-24mb/jetway/nf81-t56n-lf: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I2ccdb10b7e06e4c159b5a0203131f6ac4c37aacf Reviewed-on: https://review.coreboot.org/c/coreboot/+/38874 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/amd/olivehill: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: not tested on hardware. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: If8dd531db4a4a16ad7a068ceb281a01f4f245386 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38867 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/amd/parmer: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ic3fda4e598af8df9c9ddc97f7eb7fdcdaff6580b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38879 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/amd/persimmon: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: Not tested on hardware. Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I51d42f137fa539225bca5631bec38144ffd4f1d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38873 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24src/mb/hp/abm: Switch away from ROMCC_BOOTBLOCKMike Banon
Warning: not tested on hardware. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ifb50fd22f5ef4db204a3427e03430177cad211cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/38866 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/intel/jasperlake_rvp: Disable SATA controllerUsha P
This patch disables the SATA config from devicetree for JSL RVP, since we are not planning to use the SATA storage in chrome config. Change-Id: I9cbcbf96e70b79bfb60f228b77a1065c26cd1aa2 Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-02-24mb/google: Fix typosElyes HAOUAS
Change-Id: I77c33c19b56dc9bd54e7555ce59f6a07bde3dbb6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-24mb/amd: Fix typosElyes HAOUAS
Change-Id: I9abc0837b72b13e7614ecffa5b21c3d4bf41d0f8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-24mainboard: Add missing include <device/pci_def.h>Mike Banon
Add missing include <device/pci_def.h> for the boards that are being switched away from ROMCC_BOOTBLOCK. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I83ff712f99388c4e6ea00a942eb57bcabb53a3fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/38903 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24src: capitalize 'RAM'Elyes HAOUAS
Change-Id: Ia05cb2de1b9f2a36fc9ecc22fb82f0c14da00a76 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-24gfx: Move drivers/generic/gfx to drivers/gfx/genericFurquan Shaikh
This change creates gfx directory under drivers/ so that all drivers handling gfx devices can be located in the same place. In follow-up CLs, we will be adding another driver that handles gfx devices. This change also updates the names used within the driver from *generic_gfx* to *gfx_generic*. In addition to that, mainboard drallion using this driver is updated to match the correct path and Kconfig name. TEST=Verified that drallion still builds. Change-Id: I377743e0f6d770eed143c7b6041dab2a101e6252 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-02-24mb/google/sarien: Remove MAC address pass throughDtrain Hsu
Remove MAC address pass through because when MAC address pass through setting change to "Use dock built-in MAC address", the MAC address always keeps the VPD value. BUG=b:149813043 TEST=tested on sarien and the result as below. (Option) (Result) - Use pre-assigned MAC address : Pass - Use Chromebook built-in address : Pass - Use dock built-in MAC address : Pass Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ia85ef6ed0c4db82301375edd0968cf7dd2f62dc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-02-24mb/google/drallion: Set GPP_G4 and GPP_G6 to NC pinEric Lai
Follow latest HW schematics to set GPP_G4 and GPP_G6 to NC pin. This can save 1mW power comsumption. BUG=b:149289256 TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib3bf8b8f922a350d2b73ef5c9e9cf1b6e2c0f657 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-02-24mb/google/{auron,slippy}/ec: clear pending events on S3 wakeupMatt DeVillier
Commit 6ae8b50 [chromeec: Depend on events_copy_b to identify wake source] partially broke resume from suspend on Auron and Slippy variants when multiple events exist in the EC event queue. In the case of the device suspending manually and then subsequently having the lid closed, the device will be stuck in a resume/suspend/resume loop until the device is forcibly powered down. Mitigate this by clearing any pending EC events on S3 wakeup. Test: build/boot several Auron/Slippy variants, test suspend/resume functional with both single and multiple events in EC event queue. Change-Id: I7ec9ec575d41c5b7522c4e13fc32b0b7c77d20d9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-02-24mb/google/dedede: Add waddledoo variantKarthikeyan Ramasubramanian
Add initial support for waddledoo board. BUG=None TEST=Build the mainboard and variant board. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I8ab4d52c97b1cfb5549d2fce4b931748a1b1ff1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-24mb/google/dedede: Add EMMC configurationKarthikeyan Ramasubramanian
Turn on EMMC device and enable the HS400 mode. Configure the GPIOs associated with EMMC. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ic27c68f4622eec5b2930dc38186b82d895d3f67c Reviewed-on: https://review.coreboot.org/c/coreboot/+/38856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-02-24mb/google/dedede: Add USB configurationKarthikeyan Ramasubramanian
Add USB port configuration in devicetree. Configure USB Over-Current (OC) GPIOs. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I19f7563013c7d702d52b7f34a207a34abe308621 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-02-24mb/google/drallion: Remove MAC address pass throughDtrain Hsu
Remove MAC address pass through because when MAC address pass through setting change to "Use dock built-in MAC address", the MAC address always keeps the VPD value. BUG=b:147994020 TEST=tested on drallion and the result as below. (Option) (Result) - Use pre-assigned MAC address : Pass - Use Chromebook built-in address : Pass - Use dock built-in MAC address : Pass Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I1f58e98187feb4e428ca75f7e82c464567528526 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-02-18mb/intel/glkrvp/chromeos.fmd: Correct indentationAngel Pons
Tested with BUILD_TIMELESS, no changes. Change-Id: Iaf615e95a30e9c02ad49351a3c0db253ad713ad4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-18mb/facebook/monolith: Use serial number and UUID from VPDWim Vervoorn
The serial number and UUID returned by DMI are retrieved from VPD. The solution supports a 16 character "serial_number" and a 36 character "UUID" string. BUG=N/A TEST=tested on monolith Change-Id: I0b6ce769cfa81a1e248a35f6149b7d1bbcf1f836 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-02-18mb/facebook/monolith: Enable use of VPDWim Vervoorn
Enable use of VPD for monolith. This will be used to store the UUID and Serial number. BUG=N/A TEST=build Change-Id: I32b60fef44929c51427a124cbb81e5246db2546c Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-02-18volteer: allow empty SPD_SOURCESPaul Fagerburg
Some Volteer variants might not use SPD files. Allow SPD_SOURCES in spd/Makefile.inc to be empty. BUG=None BRANCH=None TEST=Build coreboot and see that it builds without error Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: I5a8231b999e16503867d3c8df571b11fa0c1f6a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-17treewide: capitalize 'BIOS'Elyes HAOUAS
Also replace 'BIOS' by coreboot when the image is 'coreboot.rom'. Change-Id: I8303b7baa9671f19a036a59775026ffd63c85273 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-17ec/lenovo/h8/acpi: Add alternative Fn-F2 and Fn-F3 layoutNicola Corna
thinkpad_acpi maps the battery hotkey (KEY_BATTERY) on scancode 0x01 and the lock hotkey (KEY_COFFEE) on scancode 0x02. On the Thinkpad X1 Carbon (and possibly others), the hotkeys for Fn-F2 and Fn-F3 are different from the default one so a new layout has to be defined. Change-Id: Ib2d96be1a7815d7d03e6e8c6d300fd671c8598ca Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-02-17mb/google/slippy: Fix IRQ of the ambient light sensorNicolò Veronese
Change based on google/auron that is similar to peppy. This will be helpful for the next follow-up commit that will add ACPI for the ambient light sensor. Change-Id: Ib2a8356d261d211d5ed5c0b035c94ec56b9c25b3 Signed-off-by: Nicolò Veronese <nicveronese@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-02-17soc/intel/tigerlake: Enable Audio on TGLSrinidhi N Kaushik
Configure UPDs to support Audio enablement. Correct the upd name in jslrvp devicetree to avoid compilation issue. BUG=b:147436144 BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Idd3927a33d303ed5a663b5b838f43ed4ebc7a0db Reviewed-on: https://review.coreboot.org/c/coreboot/+/38147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-02-17mb/google/drallion/variants/drallion: Update thermal configuration for DPTFJohn Su
Follow thermal table for fine tuning. 1. Update PSV values for sensors. 2. Change PL1 min value from 4W to 5W. 3. Change PL1 max value from 15W to 12W. 4. Change PL2 min value from 15W to 12W. BUG=b:148627484 TEST=Built and tested on drallion Change-Id: I957d41e3c14f6dbcec8c3555382895698beabe40 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-02-17mb/google/drallion: Set cpu_pl2_4_cfg to baseline for DrallionJohn Su
Proper VR settings will be selected by CPU SKU and cpu_pl2_4_cfg. BUG=b:148912093 BRANCH=None TEST=build coreboot and checked IA_TDC from TAT tool. Change-Id: Ie471dee0c70e1831a822860c0a44455772a2b8be Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-02-17mb/google/octopus/variants/dood: add two new SKU IDsKenneth Chan
add SKU ID 3 and 4 for dood DVT 1: Dood WiFi + LTE (evt) 2: Dood WiFi (evt) 3: Dood WiFi + LTE + dual camera (dvt) 4: Dood WiFi + dual camera (dvt) BUG=b:148988979 TEST=build firmware and verify on the DUT of sku 3 and 4 check LTE module is enabled or not Change-Id: If86efe2a2f7b2e165ad44220b6dd59e9080b5892 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38730 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/drallion: Correct USB3 OC pin configurationEric Lai
USB3 OC pin is configured for the wrong pin. Follow HW circuit (schematics) to set it correctly. BUG=b:147869924 TEST=USB function works well and OC function is corresponds to the right port. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I61234a2054ab52fa508482d3dd0f94b13f96a5c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38885 Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/puff: Enable SPD_READ_BY_WORD to short the boottimeJamie Chen
Puff uses the smbus to access the SPD of memory DIMMs. It will short the SPD reading time if enabling SPD_READ_BY_WORD. BUG=b:149360051 BRANCH=None TEST=build puff and boot up OS ran cbmem -t | grep FspMemoryInit Without this patch: 950:calling FspMemoryInit 643,199 (257,588) With this patch: 950:calling FspMemoryInit 477,714 (154,612) Signed-off-by: Jamie Chen <jamie.chen@intel.com> Change-Id: I161e8eb386ab604b16746f0deeecc3d6c9063c3a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-02-17mb/google/kukui: fine tune the video timing of panel-BOE_TV101WUM_N53Jitao Shi
Fine tune the video timing of panel-BOE_TV101WUM_N53 to avoid noise. The parameters are based on BOE NV101WUM-N53 preliminary product spec. BRANCH=kukui BUG=b:147378025 TEST=bootup pass Change-Id: Ia9e2cc90f233e87d712c2dc6f4441ca2e5423162 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38401 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/kukui: Add panel for KakaduCasper Chang
Declare the following panel for Kakadu: - BOE_TV105WUM_NW0 BUG=b:148997748 TEST=build Kakadu image passed BRANCH=kukui Signed-off-by: Casper Chang <casper_chang@bitand.corp-partner.google.com> Change-Id: I394b8cafa8be40e5fd6bf8ceb81b520df73718a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38822 Reviewed-by: Peichao Li <peichao.wang@bitland.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/octopus: Add custom SAR values for BipshipTony Huang
Bipship is a sustaining project of Blooguard. SAR value follow Blooguard. BUG=b:149414960 BRANCH=octopus TEST=build and verify load correct SAR value by sku-id Change-Id: Ic45ed10fc147401d4278f1811a86cd2b2e4c63ac Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-02-17mb/google/dedede: Configure I2C portsKarthikeyan Ramasubramanian
Enable I2C ports that are used. Add GPIO configuration for the I2C ports. Enable config items that are required for I2C HID & Generic devices. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I12e974530fb5f61fae5d12cadbb3f928e617d73a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-02-17mb/google/dedede: Add console UART configurationKarthikeyan Ramasubramanian
Enable UART Port 2 as console UART and configure the concerned GPIOs. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I30a64a3c96226ce3244d55919b6d65fbf0a096e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38776 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/dedede: Enable AP <-> H1 CommunicationKarthikeyan Ramasubramanian
Turn on the H1 device in the devicetree. Configure the concerned GPIOs and enable the required config items. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I37972635454cd0d35608623e7be4110012ace658 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38772 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 13:28:28 +0000