summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2018-11-27mb/google/octopus/var/phaser: Deprecate board id 0Furquan Shaikh
This change gets rid of bid0_override_table as part of clean up effort to deprecate bid0. Additionally, it updates the touchscreen enable GPIO in overridetree and gets rid of code in variant.c to update enable gpio at runtime. BUG=b:119885949 Change-Id: I527973747e7d81ec47997da57eeb15f38d3ac2fd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2018-11-27mainboard/google/reef: Bump mainboard mem versionKane Chen
This change is to bump fsp_memory_mainboard_version in order to trigger MRC full training BUG=b:119481870 CQ-DEPEND=CL:*716558 BRANCH=reef, coral TEST=make sure MRC retraining is triggered and the MRC cache is updated to newer version. Change-Id: I92463045f7a808fb25aaa7a2d5f6fcde36dfb458 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/29647 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/intel/icelake_rvp: Enable HDA audio supportAamir Bohra
This patch enables HDA audio support on icelake rvp. Add ALC700 codec verb table and selects SOC_INTEL_COMMON_BLOCK_HDA_VERB config to detect and initialize codec configuration as specified in verb table. BUG=none TEST=verify codec is listed and audio playback is working Change-Id: Ibdf707f9002a09870ebe879c9db462084ecb01ea Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-11-27mb/intel/icelake_rvp: Add EC acpi support codeAamir Bohra
This implementation adds below changes: 1. Add chrome ec asl support for iclrvp. 2. EC SCI, SMI, S3/S5 wake events. 3. Wake pin and EC SMI GPE confiiguration. Change-Id: Ie95da92f7125e56fe9ef9d57a1098278c308918e Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29797 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/intel/icelake_rvp: Include cpu.asl in DSDT ACPI tableAamir Bohra
This implementation adds support of PNOT method included in cpu.asl. It is needed to notify CPU APCI device to re-evaluate the _CST table for list of supported C-states. Change-Id: I135cc3aa32a912c8ad3449d063d533f8873fcc94 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-11-27sb/intel/i82801gx: Use common Intel SMM codeArthur Heymans
Use the common Intel code to set up smm and the smihandler. This is expected to break S3 resume and other smihandler related functionality as this code is meant to be used with CONFIG_SMM_TSEG. Platforms (i945, pineview, x4x) using this southbridge will adapt the CONFIG_SMM_TSEG codepath in subsequent patches. Tested on Intel D945GCLF, still boots fine but breaks S3 resume support because it hangs on SMI. Change-Id: If7016a3b98fc5f14c287ce800325084f9dc602a0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27mb/google/dragonegg: Enable audioSubrata Banik
BUG=b:116191230 BRANCH=None TEST=1. verified boot beep support at depthcharge. Change-Id: Ia4843185dd79a35476c4f0fc0666ebaf3773db4c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29753 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/google/dragonegg: Enable trackpadSubrata Banik
BUG=b:112282079 BRANCH=None TEST=1. run evtest and make sure trackpad shows up in list 2. Able to wake system from S3 using trackpad Change-Id: I86d6b7815147d558065611604363bb607119c154 Signed-off-by: Shelley Chen <shchen@google.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29752 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/google/dragonegg: Enable ps2 keyboardShelley Chen
BUG=b:112332115 BRANCH=None TEST=ensure at bootup that /sys/devices/pnp0/00:05 exists and driver link to '../../../bus/pnp/drivers/i8042 kbd' Also, can now see keyboard in evtest. Change-Id: I2a6b382be84bc5201beafe21ff8ddee3738bc5c2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/29750 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/google/dragonegg: Add initial mainboard code supportAamir Bohra
This patch includes support for both ICL ES0 and ES1 samples. Detailed document is here: Documentation/soc/intel/icelake/iceLake_coreboot_development.md TEST=Able to build and boot dragonegg. Change-Id: I2cc269cb0050bf5b031f48cfe114485c55ab8fa9 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27mb/google/poppy/variants/nami: Enable g2touch touchscreen deviceCrystal Lin
This change adds ACPI properties for GTCH7503 device. BUG=b:119169362 BRANCH=firmware-nami-10775.B TEST=Verify touchscreen works with this change Change-Id: I26e16b7e118121b3dd9a88c76d04898b97753df0 Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29768 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/google/fizz/variants/karma: Disable SD controller and update GPIODavid Wu
The SD cardreader is on USB bus, not on SDIO/SDXC. BUG=b:119798840 BRANCH=master TEST=Compiles successfully and boot on DUT. Change-Id: I8015fe35a4ff79469b5781942f588c3e1b88b751 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-27mb/google/fizz/variants/karma: Enable touchscreen wakeupDavid Wu
Set GPIO GPP_B4 to high to enable touchscreen wakeup. BUG=b:119594783 BRANCH=master TEST=DUT can wake up with touchscreen. Change-Id: If0c9493dec367c7813047c7994cc83537aaef141 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-27mainboard/google/octopus/variants/ampton: Decrease I2C CLK frequencyCarl Yang
The touchpad and touch-panel CLK frequency should be smaller than 400 kHz which described in spec. Overwrite i2c speed parameters by overridetree.cb BUG=b:119540449 BRANCH=master TEST=emerge-octopus coreboot chromeos-bootimage flash bios and check the touchpad i2c frequency meets the spec. Change-Id: I32c3e1bbfc2cdf39e9b7865a69996e54346d5f93 Signed-off-by: Carl Yang <carl_yang@asus.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-27mb/google/octopus/var/bobba: Deprecate board id < 2Furquan Shaikh
This change deprecates boards with id < 2. It updates touchscreen enable GPIO in overridetree and gets rid of variant.c to update enable GPIO at runtime. Additionally, it configures old enable GPIO as NC. BUG=b:119885949 Change-Id: I42fb7ef90e421118a8fdfa0d343d0bcf4a9bc087 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-11-27mb/google/octopus/var/fleex: Deprecate bid 0Furquan Shaikh
This change gets rid of bid0_override_table as part of clean up effort to deprecate bid0. Additionally, it updates the touchscreen enable GPIO in overridetree and gets rid of variant.c to update enable gpio at runtime. BUG=b:119885949 Change-Id: If14abb324d9422720ca4d0f0859e092319d454ee Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-11-27mb/google/octopus: Update GPIO_178 in early_gpio_table in baseboardFurquan Shaikh
This change updates the configuration of GPIO_178 to be active low as per latest revision on different octopus variants. This effectively: 1. Gets rid of early_gpio_table in different variants -- phaser, meep, fleex, bobba. 2. Deprecates board id < 2 for bobba, board id < 1 for fleex and phaser. 3. Adds special early_gpio_table in yorp which has GPIO_178 as an active high signal. BUG=b:119885949 Change-Id: I024199a8f1f96db57f8fa60c4d265789cd3a0493 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-11-27mb/google/octopus: Configure all debug header lines as NCFurquan Shaikh
This change configures all the pads going to debug header as not connected. BUG=b:111569213 BRANCH=None TEST=None Change-Id: Ie3ffdbf6ad9b1682deaada91b5c225b4c8dd035b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-11-27mb/intel/icelake_rvp: Add USB port capablity informationAamir Bohra
This implementation adds USB port capablity map for ICL-U and ICL-Y RVP. Change-Id: I20bb43c47439df0a25ff148eae2b3e0546e4bc63 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-11-27siemens/mc_apl5: Adjust the settings for the PCIe root portsMario Scheithauer
This mainboard has four connected PCIe devices. The required root ports are switched on and configured. Change-Id: I82b13e1d245a172762ebd689ae136a762027033f Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/29810 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-26siemens/mc_apl1/variants/mc_apl*: Remove unneeded PTN readMario Scheithauer
An additional read of PTN configuration data at the end of the ptn3460_init function is not necessary. Change-Id: I5f7f647242e94b1af13757d00e80ed9813d435d0 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/29799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-11-23mb/google/kahlee: Enable 2T mode for liara in DVT phaseChris Wang
Change the board id detection to support rev5, since the 2T mode still needed in DVT build. BUG=b:116082728 TEST=verify by ODM. Change-Id: Ibb4cc1fd2bb54984cb7a8856ed7b9f49b78eddce Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-11-23siemens/mc_apl4: Set CPU clock to minimum ratioWerner Zeh
The power budget for this mainboard is very limited while the performance demand is low. Set the CPU clock to the lowest value to enable maximum efficiency and thus lowest power dissipation. Change-Id: I23c7c5393deb676b94f2b0ac25e21a7a44cd8cb3 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
Field 'OEMID' & "OEM Table ID" are related to DSDT table not to mainboard. So use macro to set them respectvely to "COREv4" and "COREBOOT". Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2018-11-23mb/intel/icelake_rvp: Add support for ALPS touchpadAamir Bohra
BUG:none TEST:Verify cursor response and button clicks Change-Id: I4085b70560e2840c71b989348f56ca907e7cea4b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29777 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23mb/intel/icelake_rvp: Add ICL U and Y RVP DIMM configurationAamir Bohra
List of ICL board variants 1. ICL-U DDR4 - All possible DDR4 memory type LPDDR4 - Memory down fixed DIMM configuration 2. ICL-Y All LPDDR4 DIMM on platform This patch ensures to have all proper SPD configuration. Change-Id: Id596a3c85b13559b3002dcadfee9c945256e28e7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-11-23mb/intel/icelake_rvp: Configure eSPI IO decode range for ECAamir Bohra
This implementation adds eSPI IO decode range for EC. 1. 0x800-0x8FF / 0x200-020F: EC host command range. 2. 0x900-0x9ff: EC memory map range. Change-Id: I69e6b3a83c072036c5b3ae801f8d80dfda82478e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-11-22grunt: Default SPK_PA_EN to LOWRaul E Rangel
We need to default this to low so the speakers don't activate in S3. BUG=b:118248953 TEST=Used a scope to look at the line and made sure depthcharge still beeps. Change-Id: I70d2f4a3261d212b62e784fa7414e45b1d575612 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/29783 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-22mb/google/poppy/variant/nocturne: enable USB acpiNick Vaccaro
Main objective for this change is to export the bluetooth reset gpio to the kernel for use in an rf-kill operation. To do so, we enable USB acpi and define all of the USB2 devices, which includes bluetooth's reset gpio information. This change produces the following nodes in the SSDT : Scope (\_SB.PCI0.XHCI.RHUB.HS01) { Name (_DDN, "USB Type C Port 1") // _DDN: DOS Device Name Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities { 0xFF, 0x09, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x1, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "OVAL", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) // _PLD: Physical Location of Device } Scope (\_SB.PCI0.XHCI.RHUB.HS03) { Name (_DDN, "Bluetooth") // _DDN: DOS Device Name Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities { 0xFF, 0xFF, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x0, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "UNKNOWN", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) // _PLD: Physical Location of Device Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x0062 } }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "reset-gpio", Package (0x04) { \_SB.PCI0.XHCI.RHUB.HS03, Zero, Zero, One } } } }) } Scope (\_SB.PCI0.XHCI.RHUB.HS05) { Name (_DDN, "USB Type C Port 2") // _DDN: DOS Device Name Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities { 0xFF, 0x09, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x1, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "OVAL", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) // _PLD: Physical Location of Device } Scope (\_SB.PCI0.XHCI.RHUB.HS07) { Name (_DDN, "POGO") // _DDN: DOS Device Name Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities { 0xFF, 0xFF, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x0, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "UNKNOWN", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) // _PLD: Physical Location of Device } BUG=b:119275094 TEST=build and flash to nocturne, log into nocturne and 'cat /sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dml', copy that ssdt.dsml to /tmp/ssdt.dml on host machine, 'iasl -d /tmp/ssdt.dml', then verify that "reset gpio" shows up in the HS03 node's _DSD package in the table. Change-Id: I65d9b580fd69fd0a2c84f14b78a8e8b5e9217b16 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/29622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajat Jain <rajatja@google.com>
2018-11-22mb/google/poppy/variants/nami: Split FP MCU Wake and IRQ GPIOSShelley Chen
We are seeing problems (interrupt storm) with using the same gpio for FP MCU wake and irq signals. Reverting back to using separate gpios for wake and irq until we resolve the issue. BUG=b:119447525, b:115706071 BRANCH=Nami TEST=Run powerd_dbus_suspend from kernel and make sure see DUT drop into S0ix in the EC console. Also, unlock from lock screen with fingerprint. Change-Id: Id7987f28526256808b8ed49e66f66298f7cdbcee Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/29665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Vincent Wang <vwang@google.com>
2018-11-21(console,drivers/uart)/Kconfig: Fix dependenciesNico Huber
The dependencies of CONSOLE_SERIAL and DRIVERS_UART were somehow backwards. Fix that. Now, CONSOLE_SERIAL depends on DRIVERS_UART, because it's using its interface. The individual UART drivers select DRIVERS_UART, because they implement the interface and depend on the common UART code. Some guards had to be fixed (using CONSOLE_SERIAL now instead of DRIVERS_UART). Some other guards that were only about compilation of units were removed. We want to build test as much as possible, right? Change-Id: I0ea73a8909f07202b23c88db93df74cf9dc8abf9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-21mainboard/ocp/wedge100s: Add vboot supportPhilipp Deppenwiese
* Add RO only FMAP. * Add kconfig options. Tested=OCP Wedge100s Change-Id: I1979e0263e41f21c01c407ac81ad1198a53741e8 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21ACPI: Fix DSDT's revision fieldElyes HAOUAS
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version. This will cause the AML interpreter to use 32-bit integers and math if the version is 1, and 64-bit if the version is >=2. Current spec version is 2 for ACPI 6.2-a. Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29626 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21mb/google/octopus: Update TSR1 threshold settingsSumeet Pawnikar
Update passive temperature threshold value from 50C to 52C and critical temperature threshold from 90C to 80C for TSR1 sensor. BUG=b:79779737 TEST=Build and verified on Bobba/Bobba360/Sparky/Sparky360 boards Change-Id: Iffef8afe0f1c6c80a6ae8ecb831aaf749443980e Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/29264 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21nb/intel/haswell: Move MMCONF_BASE_ADDRESS to northbridge KconfigElyes HAOUAS
Change-Id: I44f27405fc8ccbe54c7d19b70327da866390a156 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/28603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2018-11-19mb/pcengines/apu2: Use IS_ENABLED(CONFIG_APU2_PINMUX_{GPIO*,UART_*})Elyes HAOUAS
Change-Id: Ie5f73453a8cc12be5f18d8e7f0462ce3f38bb9d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29585 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-19mb/google/kahlee/variants/delan: Enable Weida touchscreen deviceIvy Jian
This change adds ACPI properties for WDT8752A device. BUG=b:117174180 BRANCH=master TEST=Verify touchscreen on delan works with this change Change-Id: Id1484a482de6282c97f3aac329f217bbcb7dbd18 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-11-19northbridge/intel/fsp_*: Remove legacy SoCszaolin
* Remove FSP Sandy/Ivybrige which are unused. * Open Source implementation isn't final but good enough to replace FSP version. * For new ports use NORTHBRIDGE_INTEL_IVYBRIDGE and NORTHBRIDGE_INTEL_SANDYBRIDGE Change-Id: I7b6bc4bfdd0481c8fe5b2b3d8f8b2eb9aa3c3b9e Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/29402 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-19src: Add required space after "switch"Elyes HAOUAS
Change-Id: I85cf93e30606bc7838852bd300a369e79370629a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-18mb/asus/p5qc: Add p5ql_pro mainboard as variantAngel Pons
Working: - SATA on southbridge ports - SATA on Marvell IDE controller ports - USB - COM1 - PS/2 keyboard - DDR2 DIMMs - PCIe x16 PEG port - PCIe x1 ports - PCI ports - NIC (MAC address needs to be set in Kconfig or in a CBFS file) - S3 resume - Green audio line out connector (the rest is untested) Not working: - Floppy port. Does not seem to be mainboard-specific, though. Untested: - EHCI debug TODO: - Add documentation Change-Id: I6ed434a691e8ef2a61e0acb1f986a59b8e1ad818 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/25691 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-18mb/google/fizz/variants/karma: Increase Pmax to 151 for all SKUsDavid Wu
Needs to increase ROPmax to 80W (includes both panel and audio), hence the Pmax = 71W (PL4) + 80W (ROPmax) = 151W. BUG=b:119644629 BRANCH=master TEST=USE=fw_debug emerge-kalista chromeos-mrc coreboot chromeos-bootimage & ensure the Pmax value is passed to FSP-S. Change-Id: I504ff66a218bf4e385270c2cb385a83dca312a81 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-18siemens/mc_apl5: Add new mainboard variant mc_apl5Mario Scheithauer
This mainboard is based on mc_apl1. In a first step, it contains a copy of mc_apl1 directory with minimum changes. Special adaptations for mc_apl5 mainboard will follow in separate commits. Change-Id: Icdbb116a822ffa7a3bfb7026a5d1164db56a0c46 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-17src/mb/asus/p5qc/gpio.c: Allow specifying a gpio.c in KconfigAngel Pons
Even though these two mainboards use the same gpio.c file, other boards such as the p5ql_pro do not. Change-Id: I2f7c8c12cb1bdcf47f3b4d4cef0b11e44a5b8863 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/29447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-17mb/google/poppy/variants/nami: Invert FP MCU wake signalShelley Chen
GPP_D6 needs to be inverted to enter S0ix because FPMCU_INT_L is active low. Keeps device awake otherwise. BUG=b:119447525, b:115706071 BRANCH=Nami TEST=Run powerd_dbus_suspend from kernel and make sure see DUT drop into S0ix in the EC console. Change-Id: Iad5df124e2439bbdc078d6a33f8d0510d25ecf6f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/29650 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-17mb/google/sarien: Set SMBIOS mainboard SKUDuncan Laurie
Setting sku_id() is not enough to get a value to show up in the SMBIOS tables, it also needs to be returned as a string for the table creation to consume. This change defines the smbios_mainboard_sku() function and returns a string constant of "sku#" as expected. Change-Id: I03013bab89d53d1eba969c6ffb7e95fcbb315a81 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Trent Begin <tbegin@google.com>
2018-11-16SMBIOS: Remove duplicated smbios_memory_type enumElyes HAOUAS
Change-Id: I49554d13f1b6371b85a58cc1263608ad9e99130e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-11-16mb/google/octopus/variants/bobba: Set tcc offset for bobbaSumeet Pawnikar
Change tcc offset from 0 to 10 degree celsius for bobba. BUG=b:118099582 TEST=Cross verified the value using TAT UI. Change-Id: I68527c27635844f4edb0dda5f6018589d7bae297 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/29636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-11-16mb/google/poppy/variant/atlas: config GPP_F10 to use PLTRSTNick Vaccaro
GPIO's that use GPI_APIC setting with DEEP causes an IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get their logic reset over PLTRST to prevent IRQ storm after S3 resume and hence configuring GPP_F10 (HP_IRQ_GPIO) to use PLTRST. BUG=none TEST=none Change-Id: Idc6c42cb4dc6e8eb368d605c83f584f4c69077dc Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/29540 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mb/siemens/mc_apl1/variants/mc_apl*: Remove unused BOARD_SIEMENS_MC_APL*_VARElyes HAOUAS
Change-Id: I6e911556abc7b7ac3573c5807b6453eecaff7e10 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-11-16src: Remove unneeded include <cbmem.h>Elyes HAOUAS
Change-Id: I89e03b6def5c78415bf73baba55941953a70d8de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29302 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <cbfs.h>Elyes HAOUAS
Change-Id: Iab0bd1c5482331a0c048a05ab806bf5c4dbda780 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29303 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mainboard: Add ASRock H81M-HDSTristan Corrick
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with kernel 4.9. This board works quite well under coreboot. A list of what works and what doesn't can be found in the documentation part of this commit. The file `data.vbt` matches the VBT in the latest stable version of the vendor firmware (version 2.20). Change-Id: I53483bb9fa335e86e85dfc487fef03fce4b85e2a Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-16sb/intel/lynxpoint: Generate the ACPI FADT with a common functionTristan Corrick
The function `acpi_fill_fadt()` is based on that of sb/intel/bd82x6x. Tested on an ASRock H81M-HDS and a Google Peppy board, both using Linux 4.9 with `acpi=strict`. No ACPI errors or warnings appear in the kernel log. System reset, poweroff, and S3 suspend/resume continue to work. General improvements -------------------- - `fadt->preferred_pm_profile` is set based on the value of `CONFIG_SYSTEM_TYPE_LAPTOP` instead of being hardcoded. - Constants are used instead of magic values in more locations. - `fadt->gpe0_blk`, `fadt->gpe0_blk_len`, and `fadt->x_gpe0_blk` are set appropriately depending on whether the system uses Lynx Point LP or not. - Boards can indicate docking support in the FADT via the devicetree. Changes to existing Lynx Point boards ------------------------------------- - `header->asl_compiler_revision` changes from 1 to 0. - `fadt->model` is left at 0 instead of being set to 1. This field is only needed for ACPI 1.0 compatibility. - `fadt->flush_size` and `fadt->flush_stride` are set to 0. This is because their values are ignored, since `ACPI_FADT_WBINVD` is set in `fadt->flags`. - `fadt->duty_offset` is set to 0 instead of 1. None of the existing boards indicate support for changing the processor duty cycle (as `fadt->duty_width` is set to 0), so `fadt->duty_offset` does not currently need to be set. - Access sizes of registers are set. - On mb/intel/baskingridge, the pmbase is now read using the common function `get_pmbase()` instead of `pci_read_config16(...)`. - On mb/intel/baskingridge, the value of `fadt->x_gpe0_blk.bit_width` changes from 64 to 128. The correct value should be 128 (bits), to match `fadt->gpe0_blk_len`, which is set to 16 (bytes). - On Lynx Point LP systems, the unused extended address `fadt->x_gpe0_blk` sets its address space ID to be consistent with other unused extended addresses. Such a change should not alter the interpretation of the registers as being unused. Why not set them all to zero? Simply because the existing practice, in both coreboot and some other vendors' firmware, has them set in such a case. A diff of the FADT from a Google Peppy board is below: --- pre/facp.dsl 2018-10-30 20:14:52.676570798 +1300 +++ post/facp.dsl 2018-10-30 20:15:06.904381436 +1300 @@ -1,179 +1,179 @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20180810 (64-bit version) * Copyright (c) 2000 - 2018 Intel Corporation * - * Disassembly of facp.dat, Tue Oct 30 20:14:52 2018 + * Disassembly of facp.dat, Tue Oct 30 20:15:06 2018 * * ACPI Data Table [FACP] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)] [004h 0004 4] Table Length : 000000F4 [008h 0008 1] Revision : 04 -[009h 0009 1] Checksum : 61 +[009h 0009 1] Checksum : 6E [00Ah 0010 6] Oem ID : "CORE " [010h 0016 8] Oem Table ID : "COREBOOT" [018h 0024 4] Oem Revision : 00000000 [01Ch 0028 4] Asl Compiler ID : "CORE" -[020h 0032 4] Asl Compiler Revision : 00000001 +[020h 0032 4] Asl Compiler Revision : 00000000 [024h 0036 4] FACS Address : 7BF46240 [028h 0040 4] DSDT Address : 7BF46280 -[02Ch 0044 1] Model : 01 +[02Ch 0044 1] Model : 00 [02Dh 0045 1] PM Profile : 02 [Mobile] [02Eh 0046 2] SCI Interrupt : 0009 [030h 0048 4] SMI Command Port : 000000B2 [034h 0052 1] ACPI Enable Value : E1 [035h 0053 1] ACPI Disable Value : 1E [036h 0054 1] S4BIOS Command : 00 [037h 0055 1] P-State Control : 00 [038h 0056 4] PM1A Event Block Address : 00001000 [03Ch 0060 4] PM1B Event Block Address : 00000000 [040h 0064 4] PM1A Control Block Address : 00001004 [044h 0068 4] PM1B Control Block Address : 00000000 [048h 0072 4] PM2 Control Block Address : 00001050 [04Ch 0076 4] PM Timer Block Address : 00001008 [050h 0080 4] GPE0 Block Address : 00001080 [054h 0084 4] GPE1 Block Address : 00000000 [058h 0088 1] PM1 Event Block Length : 04 [059h 0089 1] PM1 Control Block Length : 02 [05Ah 0090 1] PM2 Control Block Length : 01 [05Bh 0091 1] PM Timer Block Length : 04 [05Ch 0092 1] GPE0 Block Length : 20 [05Dh 0093 1] GPE1 Block Length : 00 [05Eh 0094 1] GPE1 Base Offset : 00 [05Fh 0095 1] _CST Support : 00 [060h 0096 2] C2 Latency : 0001 [062h 0098 2] C3 Latency : 0057 -[064h 0100 2] CPU Cache Size : 0400 -[066h 0102 2] Cache Flush Stride : 0010 -[068h 0104 1] Duty Cycle Offset : 01 +[064h 0100 2] CPU Cache Size : 0000 +[066h 0102 2] Cache Flush Stride : 0000 +[068h 0104 1] Duty Cycle Offset : 00 [069h 0105 1] Duty Cycle Width : 00 [06Ah 0106 1] RTC Day Alarm Index : 0D [06Bh 0107 1] RTC Month Alarm Index : 00 [06Ch 0108 1] RTC Century Index : 00 [06Dh 0109 2] Boot Flags (decoded below) : 0003 Legacy Devices Supported (V2) : 1 8042 Present on ports 60/64 (V2) : 1 VGA Not Present (V4) : 0 MSI Not Supported (V4) : 0 PCIe ASPM Not Supported (V4) : 0 CMOS RTC Not Present (V5) : 0 [06Fh 0111 1] Reserved : 00 [070h 0112 4] Flags (decoded below) : 00008CAD WBINVD instruction is operational (V1) : 1 WBINVD flushes all caches (V1) : 0 All CPUs support C1 (V1) : 1 C2 works on MP system (V1) : 1 Control Method Power Button (V1) : 0 Control Method Sleep Button (V1) : 1 RTC wake not in fixed reg space (V1) : 0 RTC can wake system from S4 (V1) : 1 32-bit PM Timer (V1) : 0 Docking Supported (V1) : 0 Reset Register Supported (V2) : 1 Sealed Case (V3) : 1 Headless - No Video (V3) : 0 Use native instr after SLP_TYPx (V3) : 0 PCIEXP_WAK Bits Supported (V4) : 0 Use Platform Timer (V4) : 1 RTC_STS valid on S4 wake (V4) : 0 Remote Power-on capable (V4) : 0 Use APIC Cluster Model (V4) : 0 Use APIC Physical Destination Mode (V4) : 0 Hardware Reduced (V5) : 0 Low Power S0 Idle (V5) : 0 [074h 0116 12] Reset Register : [Generic Address Structure] [074h 0116 1] Space ID : 01 [SystemIO] [075h 0117 1] Bit Width : 08 [076h 0118 1] Bit Offset : 00 -[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy] +[077h 0119 1] Encoded Access Width : 01 [Byte Access:8] [078h 0120 8] Address : 0000000000000CF9 [080h 0128 1] Value to cause reset : 06 [081h 0129 2] ARM Flags (decoded below) : 0000 PSCI Compliant : 0 Must use HVC for PSCI : 0 [083h 0131 1] FADT Minor Revision : 00 [084h 0132 8] FACS Address : 000000007BF46240 [08Ch 0140 8] DSDT Address : 000000007BF46280 [094h 0148 12] PM1A Event Block : [Generic Address Structure] [094h 0148 1] Space ID : 01 [SystemIO] [095h 0149 1] Bit Width : 20 [096h 0150 1] Bit Offset : 00 -[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy] +[097h 0151 1] Encoded Access Width : 02 [Word Access:16] [098h 0152 8] Address : 0000000000001000 [0A0h 0160 12] PM1B Event Block : [Generic Address Structure] [0A0h 0160 1] Space ID : 01 [SystemIO] [0A1h 0161 1] Bit Width : 00 [0A2h 0162 1] Bit Offset : 00 [0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy] [0A4h 0164 8] Address : 0000000000000000 [0ACh 0172 12] PM1A Control Block : [Generic Address Structure] [0ACh 0172 1] Space ID : 01 [SystemIO] [0ADh 0173 1] Bit Width : 10 [0AEh 0174 1] Bit Offset : 00 -[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy] +[0AFh 0175 1] Encoded Access Width : 02 [Word Access:16] [0B0h 0176 8] Address : 0000000000001004 [0B8h 0184 12] PM1B Control Block : [Generic Address Structure] [0B8h 0184 1] Space ID : 01 [SystemIO] [0B9h 0185 1] Bit Width : 00 [0BAh 0186 1] Bit Offset : 00 [0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy] [0BCh 0188 8] Address : 0000000000000000 [0C4h 0196 12] PM2 Control Block : [Generic Address Structure] [0C4h 0196 1] Space ID : 01 [SystemIO] [0C5h 0197 1] Bit Width : 08 [0C6h 0198 1] Bit Offset : 00 -[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy] +[0C7h 0199 1] Encoded Access Width : 01 [Byte Access:8] [0C8h 0200 8] Address : 0000000000001050 [0D0h 0208 12] PM Timer Block : [Generic Address Structure] [0D0h 0208 1] Space ID : 01 [SystemIO] [0D1h 0209 1] Bit Width : 20 [0D2h 0210 1] Bit Offset : 00 -[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy] +[0D3h 0211 1] Encoded Access Width : 03 [DWord Access:32] [0D4h 0212 8] Address : 0000000000001008 [0DCh 0220 12] GPE0 Block : [Generic Address Structure] -[0DCh 0220 1] Space ID : 00 [SystemMemory] +[0DCh 0220 1] Space ID : 01 [SystemIO] [0DDh 0221 1] Bit Width : 00 [0DEh 0222 1] Bit Offset : 00 [0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy] [0E0h 0224 8] Address : 0000000000000000 [0E8h 0232 12] GPE1 Block : [Generic Address Structure] [0E8h 0232 1] Space ID : 01 [SystemIO] [0E9h 0233 1] Bit Width : 00 [0EAh 0234 1] Bit Offset : 00 [0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy] [0ECh 0236 8] Address : 0000000000000000 Change-Id: I9638bb5ff998518eb750e3e7e85b51cdaf1f070e Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29387 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mb/google/poppy/variant/atlas: I2C: run trackpad at 1MHzCaveh Jalali
With this change, coreboot thinks we're running at 1MHz: DW I2C bus 2 at 0xd1133000 (1000 KHz) Elan eKT3644 IC Specification (trackpad) requires: Low Time larger than 500ns (61 * 8.3ns = 506ns). High Time larger than 260ns (32 * 8.3ns = 265ns), Data Hold_time larger than 0ns. Start Condition Hold time larger than 250ns. Rise/Fall time of less than 120ns. HCNT controls both High Time and Start Condition Hold time. LCNT controls Low Time. SDA_HOLD controls Data Hold Time. P2 Atlas "Rise time" is 90ns and "Fall time" is 32ns and tuned using resistors on the board and must be considered when adjusting any of the parameters since these times are all measured at 30 or 70% of base and peak voltages (0v/1.8v). The eKT3644 requirements are met with LCNT=69, HCNT=33, SDA_HOLD=20 which yields the SCL at around 950KHz - suboptimal but compliant. Lower LCNT or HCNT results in "lost arbitration" errors or not complying with eKT3644 requirements. Verified by gaggery.tsai@intel.corp-partner.google.com. Scope shots posted here: https://b.corp.google.com/issues/78601949#comment177 BUG=b:78601949 BRANCH=none TEST=Farzam provided test points on track pad for SCL/SDA/GND. Waveforms measured with oscilloscope and screen shots attached to bug (comment #177, #155, #100). Operate trackpad/touchscreen Review dmesg (kernel) output for correct speed, parameters, and no errors (e.g. "lost arbitration" or "host controller timeout") Change-Id: Iaf42ba7b8818b7cd9c8dcc657823dac705659d38 Signed-off-by: Caveh Jalali <caveh@chromium.org> Signed-off-by: Grant Grundler <grundler@chromium.org> Tested-by: gaggery.tsai@intel.corp-partner.google.com Tested-by: grundler@chromium.org Reviewed-on: https://review.coreboot.org/29553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
2018-11-16mb/intel/whlrvp: Enable HDA controller driverLijian Zhao
Enable HDA controller coreboot driver for Whiskey Lake RVP platform on top of common code. BUG=N/A TEST=Build and boot up on whiskey lake rvp board, comfirm audio playback is working. Change-Id: I7daf1c741b92ff59b9cb4030d218e9c1054c4b79 Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/28781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2018-11-16mb/intel/cougar_canyon2: Fix SMBIOS_ENCLOSURE_TYPE symbolElyes HAOUAS
Change-Id: I9f4640ef040dc6a1d39ecb8b3378266e4dd5cec9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16mb/msi/ms9652_fam10: Remove unused VAR_MTRR_HOLEElyes HAOUAS
Change-Id: Ibbc010c9550c0a50b1e913e198f9b575107572fb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16mb/{google/cyan,intel/strago}: Remove unused DYNAMIC_VNN_SUPPORTElyes HAOUAS
Change-Id: I4d0df30255d006c0399dde1b3ba8ee513d98dc0a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src/mainboard: Remove unused "HW_MEM_HOLE_SIZE_AUTO_INC"Elyes HAOUAS
Change-Id: I10e89de270a20dbd28647e8b0f8a2425c515b350 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-16mb/{lenovo,roda}: Remove DISPLAY_DEVICE_2_IS_LCD_SCREEN macroPeter Lemenkov
This macro is no longer used since commit dd2bc3f8 with Change-Id I556769e5e28b83e7465e3db689e26c8c0ab44757 ("igd.asl rewrite"). Change-Id: Iabf927d8462673cb96851c01318d826d4c422e0d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
2018-11-16mb/google/kalista: Disable EC-EFSDaisuke Nojiri
Only input from the BJ port is wired to VSYS on Kalista. VBUS from USB-C is for output only. In other words, Kalista is a source only device from a USB/PD perspective. This patch disables EC-EFS, which would be needed for the EC to jump to RW to get PD power before the AP boots. Kalista will be always supplied enough power to boot the AP through the BJ port. CQ-DEPEND=CL:1330171 BUG=b:118386511 BRANCH=none TEST=Boot Fizz. Verify normal boot, soft sync, recovery mode work. Change-Id: Icd18662ae1e76f35eb9bcd521b1951aacc713252 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/29564 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <lib.h>Elyes HAOUAS
Change-Id: I801849fb31fe6958e3d9510da50e2e2dd351a98d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Get rid of duplicated includesElyes HAOUAS
Change-Id: I252a1cd77bf647477edb7dddadb7e527de872439 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16mb/google/poppy/variants/nautilus: Control GPP_D0 in 2nd SKU onlySeunghwan Kim
GPP_D0 is NC in 1st SKU board design, so we should control GPP_D0 for only 2nd SKU. BUG=none BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: Ifd85693c9155ed960f0c794d4b83fe8863b77134 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/29631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-16mb/google/poppy/variant/nocturne: Configure GPP_E1 for WLAN_WAKE_LNick Vaccaro
The GPP_E1 gpio was incorrectly being defined as a no-connect. Configure GPP_E1 for the WLAN_WAKE_L signal as per the schematic. BUG=b:119508897 TEST=Build and flash nocturne, boot nocturne and 1) Verify nocturne can successfully suspend/resume from S3 and S0ix. 2) Verify wake from wlan wakes device from S3 and S0ix. To do so, a) as root, execute "iw phy phy0 wowlan enable disconnect" on DUT b) connect DUT to mobile hotspot c) sleep device via "powerd_dbus_suspend" d) turn off hotspot, verify DUT wakes from S0ix e) enable hotspot again f) connect DUT to hotspot g) sleep DUT via "sudo echo mem > /sys/power/state" h) turn off hotspot, verify DUT wakes from S3 Change-Id: I4efb4f6d601e172ae4807901e3bd4c9954319f80 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/29630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-16src: Remove unneeded include <pc80/keyboard.h>Elyes HAOUAS
Change-Id: I0dcdfb1fa782c7936a19de11adcf17387f49d9db Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16mb/*/*/Kconfig: Don't specify devicetree path if default val usedPeter Lemenkov
Change-Id: I3d77a625c5ece7b7ea5476fe0bd42829d1fc72c4 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29625 Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetreePeter Lemenkov
Change-Id: Ic9620cfa1630c7c085b6c244ca80dc023a181e30 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-16mb/cavium/cn8100_sff_evb: adjust fmapMarcello Sylvester Bauer
Adjust the default fmap description file. Tested on real hardware. Change-Id: I46165eb27314a500187bcd24e3e201cf6a3175e7 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/29596 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mb/lenovo/x60/dsdt: Remove unused includePeter Lemenkov
Tested - builds fine with this patch. Change-Id: I4666a8c9dd0e03ee32770844019dfc032e07e460 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
2018-11-16siemens/mc_apl4: Clean up ramstageMario Scheithauer
Currently, there is nothing for this mainboard to do in ramstage. Change-Id: Id74a5f3f0a0583dc6bc81044913b8bb83d3b0b93 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-16siemens/mc_apl4: Overwrite swizzle data for LPDDR4Mario Scheithauer
This mainboard is equipped with LPDDR4 modules. The corresponding memory swizzle data must be set for this purpose. Change-Id: I4017de0713f0df5e614086912fc39d8eb6562702 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Uwe Pöche <uwe.poeche@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-16mb/google/octopus: override smbios manufacturer name from CBIWisley Chen
BUG=b:118798180 TEST=emerge-octopus Change-Id: I241a76e3b55ad721c6c0176462c310bcca6b3c5d Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/29503 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-15ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT configKarthikeyan Ramasubramanian
Rename EC_ENABLE_TABLET_EVENT config as EC_ENABLE_MULTIPLE_DPTF_PROFILES since it aligns with the use-case. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes (base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: If147f1c79ceaaed00e17ec80ec6c912a8f7a8c2e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-15src/mainboard/google: Remove defining EC_ENABLE_TABLET_EVENT configKarthikeyan Ramasubramanian
Remove defining EC_ENABLE_TABLET_EVENT configuration from the boards where it is not required. BUG=b:118149364 BRANCH=None TEST=Build Change-Id: Iee70192916ac6c53bb27b7f73f3ad6d069afd030 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-14mb/emulation/qemu-i440fx|q35: Fix stack sizePatrick Rudolph
Current implementation works by luck as DCACHE area is actually RAM and stack can grow and use that RAM outside of the area. * Set DCACHE_BSP_STACK_SIZE to 0x4000. * Add an assert to make sure it is set to a sane value on all platforms. Change-Id: I71f9d74d89e4129cdc4a850acc4fc1ac90e5f628 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/29611 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-13google/grunt: Update Samsung K4A8G165WC-BCTD SPD Module Part NumberKevin Chiu
Correct SPD Module Part Number to "K4A8G165WC-BCTD" from "M471A5244CB0-CTD". BUG=b:119400832 BRANCH=master TEST=emerge-grunt coreboot chromeos-bootimage mosys memory spd print all 0 | DDR4 | SO-DIMM 0 | 1-78: Samsung | 00000000 | K4A8G165WC-BCTD 0 | 4096 | 1 | 64 0 | DDR4-1333, DDR4-1600, DDR4-2400 Change-Id: I29505d3eece2283579499a0afc424c4a28017fa5 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/29557 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-13google/grunt/aleena: Update H1/TP/TS i2c timingsLucas Chen
After adjustment on aleena EVT Audio: 390.0 KHz H1: 390.0 KHz TP: 399.8 KHz TS: 399.8 kHz BUG=b:116306959 BRANCH=master TEST=emerge-grunt coreboot, scope measuring. Change-Id: I6f621508ce2dbb1b9dcdf529ac35afc80d485f53 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-11-13mb/google/sarien: Enable EC _PTS/_WAK methodsDuncan Laurie
Enable the option to have the system level _PTS/_WAK methods call the EC provided methods when they are invoked by the OS. Verified on sarien board by inspecting dsdt.dsl: Method (_PTS, 1, NotSerialized) // _PTS: Prepare To Sleep { DBG0 = 0x96 \_SB.PCI0.LPCB.EC0.PTS (Arg0) } Method (_WAK, 1, NotSerialized) // _WAK: Wake { DBG0 = 0x97 \_SB.PCI0.LPCB.EC0.WAK (Arg0) Return (Package (0x02) { Zero, Zero }) } Change-Id: I52be1c1cd7adae9ad317a51868735eb87a410549 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-13mb/cannonlake: Remove SmbusEnable from devicetreeDuncan Laurie
Remove the SmbusEnable parameter from all Cannon Lake mainboards. Instead this will be determined by the enable state of the SMBUS PCI device. Change-Id: I7ece6768da4c517747af12a07012583575816ae1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-13soc/intel/icelake: Update GPIOs for Icelake SOCAamir Bohra
This implementation updates the GPIO pins, communities and group mapping. Change details: 1. Update 5 GPIO community includes 11 GPIO groups GPIO COM 0 GPP_G, GPP_B, GPP_A GPIO COM 1 GPP_H, GPP_D, GPP_F GPIO COM 2 GPD GPIO COM 4 GPP_C, GPP_E GPIO COM 5 GPP_R, GPP_S 2. Update GPIO IRQ routing. 3. Add GPIO configuration for iclrvp board. Change-Id: I223abacc18f78631a42f340952f13d45fa9a4703 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/29495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-11-13mb/opencellular/rotundu: Remove unused CACHE_ROM_SIZE_OVERRIDEElyes HAOUAS
Change-Id: If77c23fc5d440fe9181e4aae72ffff8ddaa716b6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-12mb/google/octopus/var/bobba: Configure EC_SYNC IRQ as level-triggeredFurquan Shaikh
This change updates the configuration of EC_SYNC IRQ to be level triggered to match the EC behavior. Change-Id: I8e3cb2ae8016ea183d9067697aa5d4b9caa2d07e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2018-11-12mb/emulation/qemu-i440fx|q35: Switch to C_ENVIRONMENT_BOOTBLOCKPatrick Rudolph
Useful for testing stuff in C_ENVIRONMENT_BOOTBLOCK, like VBOOT with separate verstage. Changes: * Use symbols to set up CAR and STACK * Zero CAR area * Move BIST failure checking to cpu folder * Rename functions where necessary Tested: * qemu-2.11.2 machine pc * qemu-2.11.2 machine q35 Test result: * BIST error reporting is still working. * Console starts in bootblock * SeaBios 1.11.2 as payload is still working Change-Id: Ibf341002c36d868b9b44c8b37381fa78ae5c4381 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/29578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-12mb/emulation/qemu-i440fx|q35: Get rid of unused headersPatrick Rudolph
Change-Id: I3cf0e4ef5b090d15ad823747fcf9219644e130fc Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/29577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-12mb/*/*: Harmonise FD and devicetree on boards featuring ICH7Arthur Heymans
On some boards the devicetree and Function Disable register did not match. In this case the FD values are put in the devicetree as these were the values that were actually used in practice. A complete devicetree will make it easier to automatically disable devices in ramstage. Change-Id: I1692ca5f490ea84e2fc520d3f66044ad7514f76e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-12intel/i945: Factor out ram init time stampsPaul Menzel
Instead of having the code for the RAM init time stamps in each mainboard’s `romstage.c`, factor it out to the northbridge code, done in commit 771328f7 (intel/i945: add timestamps in romstage). Change-Id: Ibb699a1fea2f0b1f3c6564d401542d2fb3249f5a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17994 Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-12src: Remove unneeded include "{arch,cpu}/cpu.h"Elyes HAOUAS
Change-Id: I17c4fc4e3e2eeef7c720c6a020b37d8f7a0f57a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-12mb/emulation/qemu-i440fx/Makefile.inc: Fix "No newline at end of file"Elyes HAOUAS
Change-Id: I79e9b95059f16c53767c89cfaef1e89182be9c62 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29583 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-12siemens/mc_apl4: Enable SDCARDMario Scheithauer
This mainboard also has a SD slot. Change-Id: Id56bc1be60ec8c2be0e5543d1d8851610b7248e0 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-12siemens/mc_apl4: Remove external RTC from I2C0Mario Scheithauer
This mainboard also has an external RTC chip, but not on this bus. The topic is currently in clarification and will be published with a later patch. In a first step we enable all I2C busses. Change-Id: I9ec9631ed15ab30cc6a4594531521f4a1419ad00 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-12siemens/mc_apl4: Enable all PCIe root portsMario Scheithauer
Enable all PCIe root ports for this mainboard. Change-Id: I7f6feb2f0d4c45f32d9454838e67e1a244b2712b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-12siemens/mc_apl4: Remove reduced clock rate for I2C0Mario Scheithauer
There is no device on I2C0 which requires a lower clock rate. Change-Id: Ib7c4e3251545b2d32368dd56206e3b4844a24800 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-12siemens/mc_apl4: Disable CLKREQ of PCIe root portsMario Scheithauer
All PCIe root ports of this mainboard do not have an associated CLKREQ signal. Therefore the ports are marked with "CLKREQ_DISABLED". Change-Id: I834b3b0c77223d81c950e27ccfff8e9aeece2aa4 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-12siemens/mc_apl3: Disable PCI clock outputs on XIO bridgesMario Scheithauer
On this mainboard there are legacy PCI device, which are connected to different PCIe root ports via PCIe-2-PCI bridges. This patch disables the unused PCI clock outputs on the XIO2001 PCI Express to PCI Bridges. Change-Id: I2212c1080b72a656b5c8e68b040108a7adbec608 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-12siemens/mc_apl3: Set Full Reset Bit into Reset Control RegisterMario Scheithauer
This mainboard provides customer hardware reset button. A feature of this button is that it holds the APL in reset state as long as the reset button is pressed. After releasing the reset button the APL should restart again without the need for a power cycle. When Bit 3 in Reset Control Register (I/O port CF9h) is set to 1 and then the reset button is pressed the PCH will drive SLP_S3 active (low). Change-Id: Ib842f15b6ba14851d7f9b1b97c83389adc61f50b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-12siemens/mc_apl3: Set bus master bit for on-board PCI deviceMario Scheithauer
There is an on-board PCI device where bus master has to be enabled in PCI configuration space. As there is no need for a complete PCI driver for this device just set the bus master bit in mainboard_final(). Change-Id: I1ef4a7774d4ca75c230063debbc63d03486fed6f Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-12siemens/mc_apl3: Remove the correction of the Tx signal for SATAMario Scheithauer
For this mainboard the correction of transmit voltage swing from SATA interface is not necessary. Change-Id: I900d0d44b88585c223182d85c78cf3ff1e3e9159 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-12siemens/mc_apl3: Adjust Legacy IRQ routing for PCI devicesMario Scheithauer
On this mainboard there is a legacy PCI device, which is connected to the PCIe root port via a PCIe-2-PCI bridge. This device only supports legacy interrupt routing. For this reason we have to adjust the PIR6 register (0x314c) which is responsible for PCIe device 13h and 14h. This means that the interrupt routing will also be the same for both PCIe devices. The bridge is connected to PCIe root port 2 and 3 over two lanes (Device 13.0 and 13.1). The following routing is required: INTA#->PIRQD#, INTB#->PIRQA#, INTC#->PIRQB#, INTD#->PIRQC# Change-Id: I5028c26769a2122b1c609ad7789c9949e3cb7a87 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29513 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-12mb/google/octopus/variants/fleex: Set up tcc offset for fleexJohn Su
Change tcc offset from 0 to 10 for fleex. Refer to b:117789732#1 BUG=b:117789732 TEST=Match the result from TAT UI Change-Id: I481526ab10a16a33fe0cf9528b52b8524e012451 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 22:10:39 +0000