| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I8f6226d3e74ac5c7f29f708128a7502ced1287bf
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12062
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The usage of the pin has changed and therefore this pin needs
to be set up as output and drive low initially.
Change-Id: Ie3eb9cc703f7f73d59fad52ea9e514997d84606a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12754
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The correspondence between engineering code names and
commercial names can be found on chromium.org website at:
https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices
This it to make the names more relevant:
towiki (in util/board_status/to-wiki/towiki.sh) will pick such
names, which end up in the supported board list at:
http://www.coreboot.org/Supported_Motherboards
Change-Id: I2d705672d7202964fea3f62a5bd61a231d3f14c0
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/12652
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
This is to make towiki pick that information, to make
these boards end up in the laptop list at:
http://www.coreboot.org/Supported_Motherboards
Change-Id: Ibf8bf4bf6566080a34687e36675d4c4c8b89f334
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/12716
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is to match the layout of the non-fsp baytrail to make comparisons
easier and possibly remove duplicate files.
Change-Id: I9a94842d724ab3826de711d398227e7bdc1045ff
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12686
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The SB600 code had the base address of the HPET hardcoded throughout.
It looks like the plan was to have it be updated in ACPI if needed,
but this wasn't ever implemented. The variable names being used to
do this update were the same, causing an IASL warning. Because of
this, the operation to update the HPET address actually did nothing.
This was fine, because it didn't actually need to be updated.
- Replace all that code with a #define.
- Add and update some comments in the same area.
Fixes IASL warning:
dsdt.aml 1505: Store(HPBA, HPBA)
Warning 3023 - ^ Duplicate value in list (Source is the
same as Target)
Change-Id: I9ba5fe226a4a464e0045ce7d3406898760df5e5a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12705
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
The ALIGN_CURRENT macro relied on a local variable name
as well as being defined in numerous compilation units.
Replace those instances with an acpi_align_current()
inline function.
Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12707
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Iac1adbeacdcded7faff2443b78a491cbb8a90fe8
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12628
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The symbols CHROMEOS_VBNV_EC, EC_SOFTWARE_SYNC, and VIRTUAL_DEV_SWITCH
should only be selected if CHROMEOS is selected.
Change-Id: I07ef631d63be53cf99a6bf61d0e91b88728dbba3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12659
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These had typos ARM_STAGE_ARM7 instead of ARCH_STAGE_ARM7
Change-Id: Iffe8fecb3e52a50ff02b774478a10c353093688b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12660
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
According to the ACPI Spec for CondRefOf, the result argument is
optional. In all of these locations, it was getting set but not
used, creating a warning in new versions of IASL. Since it's
an optional argument, just remove it.
dsdt.aml 640: If (CondRefOf (\_S3, Local0))
Warning 3144 - Method Local is set but never used ^ (Local0)
Change-Id: I758d198c33e585a6a4ad2c1c70f2370a01af5138
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12693
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The newer versions of IASL are unhappy when an operator
has the same object as both source and destination.
The warning can be completely disabled with a command
line argument, but in general, I'd really rather not
just disable warnings.
The bits in this register are write 1 to clear, so reading and
writing the same register is what we want to do. Instead, store
it in a temporary register then write it in a second operation.
Fixes warning:
dsdt.aml 1396: Store(PWST, PWST)
Warning 3023 - ^ Duplicate value in list
(Source is the same as Target)
Change-Id: I52d73d4431db237be83016d67cd397f31b53d9c6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12691
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
According to the ACPI Spec for CondRefOf, the result argument is
optional. In all of these locations, it was getting set but not
used, creating a warning in new versions of IASL. Since it's
an optional argument, just remove it.
dsdt.aml 22: if(CondRefOf(\_OSI,Local1))
Warning 3144 - ^
Method Local is set but never used (Local1)
Change-Id: I07f49ac5a3708838d1c4a7216dfb11acc415c881
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12692
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Chrome OS verified boot path supported multiple CBFS
instances in the boot media as well as stand-alone assets
sitting in each vboot RW slot. Remove the support for the
stand-alone assets and always use CBFS accesses as the
way to retrieve data.
This is implemented by adding a cbfs_locator object which
is queried for locating the current CBFS. Additionally, it
is also signalled prior to when a program is about to be
loaded by coreboot for the subsequent stage/payload. This
provides the same opportunity as previous for vboot to
hook in and perform its logic.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
CQ-DEPEND=CL:307121,CL:31691,CL:31690
Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12689
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Auto-indent did me wrong, and I didn't notice it.
Change-Id: I5a736cf53a3bdbe57b28b2d6a55befd341d8dfd8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12655
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
We never defined the flash size for this board, so the (too small)
default was used. Instead, adopt the size given in depthcharge's fmap
description.
Change-Id: I63782922ee05a9595d6c0de56750460ebb67aec6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12674
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The CONFIG_ is only used for Kconfig symbols outside of Kconfig. If
used inside Kconfig, you'd end up with CONFIG_CONFIG_GOP_SUPPORT when
it was used in the C code.
Change-Id: I572323ef08fdd937d33ded1c27a418b3ad856147
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12664
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The existing code for the Lenovo T400 works without changes on the
Lenovo T500. Same HDA verbs are provided by Lenovo BIOS on both
laptops.
Change-Id: I300408a8a0ed00476aee6061925befc2822fb505
Signed-off-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-on: https://review.coreboot.org/10545
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
- Change SEABIOS_MALLOC_UPPERMEMORY to using PAYLOAD_CONFIGFILE.
- Add saved seabios .config with CONFIG_MALLOC_UPPERMEMORY unset.
- Remove fixed microcode location.
Change-Id: I8b723edf6d6b5542f118e9e0e1aee8104d9cde86
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12635
Tested-by: build bot (Jenkins)
Reviewed-by: David Guckian <david.guckian@intel.com>
|
|
The existing code incorrectly used standard PCI access
calls in the bootblock. Use the I/O PCI access calls
as the normal PCI access mechanisms have not yet been
set up.
Also ensure the recovery jumper GPIO has been set to
input mode before reading it.
Change-Id: Id626d01526427004b2404e4d9b44d7c987d172d1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12651
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The _HID was present for the top level BTNS and LEDS Devices, but
was missing in the individual devices.
The alternative would be to supply the GPIO being used as an _ADR
object, but since it looks like the driver already has another
method of handling that, it isn't required.
Fixes these IASL warnings:
dsdt.aml 1522: Device (BTN1)
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
dsdt.aml 1567: Device (LED1)
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
dsdt.aml 1576: Device (LED2)
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
dsdt.aml 1587: Device (LED3)
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
Change-Id: I67c48084a6ee2a104ffff2b5a986d24a51ee49e1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12582
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Kconfig symbols CONFIG_ACPI_INCLUDE_PMIO and CONFIG_ACPI_INCLUDE_GPIO
were never added to the coreboot codebase when the Rangeley code was
brought in from Sage. These symbols disabled ACPI code that was unused
because it caused dmesg warnings due to conflicts with drivers trying to
claim the same addresses as the ACPI code. Because it could be used on
some other platforms, it was left in instead of being completely
removed.
- Change the Kconfig symbol names to simple #defines in the mainboard
code.
- Add the #defines along with comments to the reference platform.
- Hook everything together in dsdt.asl
- Update new mainboard littleplains the same way.
Change-Id: I1f62157c6e447ea9b7207699572930e4711fc3e0
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12552
Reviewed-by: David Guckian <david.guckian@intel.com>
Tested-by: build bot (Jenkins)
|
|
- Add System board _HID object.
- Remove Kconfig default disabling IASL warnings as errors
Fixes warning:
dsdt.aml 64: Device (MB) {
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
Change-Id: I4fa6ab2a6744d58ded8b0feb361e002d90e11474
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12532
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Devices that have their interrupt routing set to A, A, A, A don't get
any interrupt values assigned because that series evaluates to 0. The
code that sets the interrupt values checks to make sure a value is set
by verifying that it's not 0. On Bay Trail, these are all
single-function graphics devices, so by changing one of the unused
interrupt lines from A to any other value, it assigns the values
correctly.
This issue did not affect ACPI interrupt routing.
This is just a workaround, and the root issue still needs to be fixed.
Change-Id: I4e6fe56084cbe86b309da15d61b296f1936458ec
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12630
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Devices that have their interrupt routing set to A, A, A, A don't get
any interrupt values assigned because that series evaluates to 0. The
code that sets the interrupt values checks to make sure a value is set
by verifying that it's not 0. On Bay Trail, these are all
single-function graphics devices, so by changing one of the unused
interrupt lines from A to any other value, it assigns the values
correctly.
This issue did not affect ACPI interrupt routing.
This is just a workaround, and the root issue still needs to be fixed.
Change-Id: I78866e3e0079435037e457a4fb04979254b56ee2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12629
Tested-by: build bot (Jenkins)
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The eagleheights platform had 3 warnings:
The SIO device needs an _ADR object to specify the address in addition
to the operating region.
Not all the paths through the _OSC method returned a value. According
to the ACPI spec (5.0 & 6.0), bit 2 needs to be set for an unrecognized
GUID.
dsdt.aml 341: Device(SIO) {
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
dsdt.aml 140: Method (_OSC, 4)
Warning 3115 - ^ Not all control paths return a value (_OSC)
dsdt.aml 140: Method (_OSC, 4)
Warning 3107 - ^ Reserved method must return a value
(Buffer required for _OSC)
- Remove Kconfig default disabling IASL warnings as errors.
Change-Id: Iab52f19b96468e142b06430d99ba1d9f367d126e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12522
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: Idf74265c9c1ab3a1a74fd18dfd289fccad25177e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 569c433886b19cd08d168e995bf34156c2ba6963
Original-Change-Id: I07fda6a0719d49e2c07249276ae2cc0b57fdfeda
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292660
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12610
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I2b9e1fc16183a29ba308313d347f2f0e948e96a7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ee56cab3b5c04838af80690c21d3aa160d71501a
Original-Change-Id: I2eaa0a406c29b7c9012e3c9860967fc3f27a48a5
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292669
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12608
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch adds esd atom15 board with
Intel Atom E3815 SoC.
Change-Id: I430a40ad8ab3316d34ec5567329370f69db3f15e
Signed-off-by: Michael Tasche <michael.tasche@esd.eu>
Reviewed-on: https://review.coreboot.org/12632
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The E38xx legacy uart fires IRQ4, not IRQ3.
PCI based IRQ A is switched from IRQ4 to IRQ3,
to get a working IRQ for the legacy uart.
Change-Id: Ibc8e824c92bf1b9a92594ddc5d8a06726c9f1744
Signed-off-by: Michael Tasche <michael.tasche@esd.eu>
Reviewed-on: https://review.coreboot.org/12622
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
This patch force AGESA to use basic SPI read mode.
Without it board hangs during spi configure if W25Q32 chip is used.
Change-Id: I3e17cd21702626be5061d2fc14adc0c22f167efb
Signed-off-by: Sergej Ivanov <getinaks@gmail.com>
Reviewed-on: https://review.coreboot.org/12580
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of the SEABIOS_MALLOC_UPPERMEMORY option, use a saved SeaBIOS
.config file to do the same thing.
Change-Id: I29110a382b7770329ef938876426e571fbbbb339
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12569
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
BRANCH=none
BUG=none
TEST=Oak build pass
Change-Id: Ic2fd9b2ec0592d1f7195d72c60dab15961de0a9e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d0b00a779b87b0b625cc2bccd8f7470b79e6410
Original-Change-Id: Id9f17d64e9e30946817b86ec8cdfe67ea3dbc798
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292675
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12607
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=none
BRANCH=none
TEST=emerge-oak corebootk
Change-Id: Ic1a0d640cac7fd98acd06d619736303fa449c0a1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ce465e8cbdf6465c072e476a91a400d78c959218
Original-Change-Id: Iade51db02f45264fdffe387e0563b60e637c0710
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292674
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12606
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=verified on Oak rev2 & rev3
Change-Id: I35776f5bdf54243236afba860ae8e9117a160cde
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b46bd9a079107ab78964f7e39582b3b5c863b559
Original-Change-Id: I6696972d07adbf3da5967f09c1638bb977c10207
Original-Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292673
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12605
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
update dptf TSR1 & TSR2 critial points from 70 to 75
TSR1 & TSR2 are reach 68 degree that is close to 70 degree afer SVPT
test, change the point will avoid to trigger critial in our factory
run in test
BRANCH=none
BUG=none
TEST=build and boot chell DUT
Change-Id: Ie5b8b24d82e929a7bd254967b70b61fda2c8bd0a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cf29fee19edf425010cc76af95b7a8e73a3d82bb
Original-Change-Id: Idb9dd77432cfd246c1c612e52c6f945352e265ca
Original-Signed-off-by: Wisley Chen <Wisley.Chen@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313967
Original-Commit-Ready: Duncan Laurie <dlaurie@chromium.org>
Original-Tested-by: Chen Wisley <wisley.chen@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Chen Wisley <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/12604
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds GPIO mappings for PCH_BUZZER, AUDIO_DB_ID,
AUDIO_IRQ and BOOT_BEEP.
BUG=chrome-os-partner:47513
BRANCH=none
TEST=Built for kunimitsu but not verified on Fab 4.
Change-Id: I0172df3aa2a5c4bfc24422aa0bfb7e5f677d37c9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ba66bef6d402a1040f0f13bc828de400bc6371b7
Original-Change-Id: I1f2ed8fc283883a523a77e07de14ed90057b719b
Original-Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311806
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/12600
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disable the kepler device to save power and enable S0ix testing.
It has been disabled in the ME image and was not working anyway..
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados
Change-Id: I6640c7a09d418ba4b4de6f16138c124436dd8758
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6490769a32539cb6ef429717f021519c152a4a54
Original-Change-Id: If6e384dd2218c6a110747a489329a59fa6433c02
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313827
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12599
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
- Disable kepler device, it is removed and was not used on proto anyway.
- Enable GPP_D22 as GPO to control I2S2 buffer for bit-bang PDM.
- Disable HS400, this is breaking some devices on proto boards and
is being disabled to reduce risk for EVT build.
- Change Type-C USB2 port drive strength.
BUG=chrome-os-partner:47346
BRANCH=none
TEST=build and boot on chell proto
Change-Id: Icf31f08302c89b2e66735f7036df914c0a0b9e8c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d00abc12efa69a99e6b0272228f52fb29e6b9180
Original-Change-Id: I63bda0b06c7523df9af9aed9b82280133b01d010
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313825
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12598
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update Memory ID for Proto board
Update detection of single/dual channel memory to use SPD Index (Memory ID)
Remove boardid.h as it is no longer needed
BUG=None
BRANCH=None
TEST=Build and Boot Lars (Proto)
Change-Id: I100b0fec4bf555c261e30140109cb0f36576130c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24a4fddf4f1a4441fca8783cfa451e220ff986d8
Original-Change-Id: I636e881cb3fb9a0056edea2bc34a861a59b91c8f
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313903
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/12593
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Updated Micron SPD data to correct values
BUG=none
BRANCH=none
TEST=Tested on FAB 4 with Micron Dimm
CQ-DEPEND=CL:312546
Change-Id: Iffe2917f083e4de7944c7f249cbf55bd199f6282
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 00234d81df38139312145c89cbf38d8ac3af5735
Original-Change-Id: Ifcc85cd1aae61e02b820cb25733dfb0680410107
Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313003
Original-Commit-Ready: Freddy Paul <freddy.paul@intel.com>
Original-Tested-by: Freddy Paul <freddy.paul@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12592
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Changed index 3 to be an exception of the default Rcomp Value
BUG=None
BRANCH=None
TEST=Tested on FAB 4 SKU 1
Change-Id: I154c254835c4f6995183840cc241feeb9a448cdb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f08eba3cf623b5869a7bb03fb3b6ba084cdd1622
Original-Change-Id: I0fbcff2c3526c4ed7cf90088ca23b43774cb9f8f
Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312715
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/12591
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Updated Memory IDs and SKU IDs for FAB 4
Updated detection of single/dual channel memory to use SPD Index (Memory ID)
Added spd files for new dimms
Removed boardid.h as it is no longer needed
BUG=None
BRANCH=None
TEST=Tested on FAB4 SKU1 and SKU3
Change-Id: I60403c0e636ea28797d94cff9431af921631323e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ce39dc3b0b9448635f878ce8c1aea5b4743594c4
Original-Change-Id: I870b3dfa2c4f358defb9263e759de477bb32e620
Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312546
Original-Commit-Ready: Freddy Paul <freddy.paul@intel.com>
Original-Tested-by: Freddy Paul <freddy.paul@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/12590
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:36682
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I748752d5abca813a0469d3a76e4d40fcbeb9b959
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ece2f412d94f071a6f5f1dbed4dfaea504da9e1a
Original-Change-Id: I1dd5567a10d20840313703cfcd328bec591b4941
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292558
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12587
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Not all the paths through the _OSC method returned a value. According
to the ACPI spec (5.0 & 6.0), bit 2 needs to be set for an unrecognized
GUID.
Fixes warnings for both platforms:
dsdt.aml 1143: Method(_OSC,4)
Warning 3115 - ^ Not all control paths return a value (_OSC)
dsdt.aml 1143: Method(_OSC,4)
Warning 3107 - ^ Reserved method must return a value
(Buffer required for _OSC)
Change-Id: Ibaf27c5244b1242b4fc1de474c371f54f930dcb6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12530
Tested-by: build bot (Jenkins)
Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Board uses Pineview native raminit
Board boots from grub to linux kernel
VGA needs work, currently headless machine
Change-Id: I8e459c6d40e0711fac8fb8cfbf31d9cb2aaab3aa
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/10074
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I73eb2425bbdb7e329a544d55461877d1dee0d05b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12067
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This adds a new mainboard: Little Plains for Intel's atom c2000
It was based on Mohon Peak board with some minor changes
This board is not available as standalone product
It is a managment board for
Intel Ethernet Multi-host Controller FM10000 Series
The FSP package is available from Intel: https://www.intel.com/fsp
Change-Id: I28127a858106ed35d26e235f0c6393c20ed14350
Signed-off-by: Marcin Wojciechowski <marcin.wojciechowski@intel.com>
Reviewed-on: https://review.coreboot.org/12503
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The CPU <--> CPU HT wiring on this board has only been validated
to 2.6GHz. While higher frequencies appear to function initially,
and in fact function when only one CPU package is installed, dual
CPU package systems will lock up after around 6 - 12 hours of uptime
due to presumed HT link errors at the higher (>= 2.8GHz) HT clocks.
If applications are not being used that stress the coherent fabric,
then the uptime before hang may be much longer. Users attempting
to overclock the HT links are advised to "burn in test" the HT links
by running memtester locked to a node with no local memory installed.
Change-Id: I8fae90c67aa0e8b103e9b8906dea50d1e92ea5a9
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12064
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As far as I can tell the Kconfig symbol DRIVERS_I2C_IDREG never actually
existed in the coreboot codebase. I didn't see anything that it might
have been a typo of.
Change-Id: Ib17de670e38e07ab4a4745143c42fa85da1754e1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12563
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
|
|
- Add an empty Operating Region for the empty _REG method
- Move Named objects out of _CRS Method
- Remove Kconfig default disabling IASL warnings as errors
Fixes these items:
dsdt.aml 1449: Method (_CRS, 0)
Remark 2120 - ^ Control Method should be made Serialized
(due to creation of named objects within)
dsdt.aml 1458: Method (_REG, 2)
Warning 3079 - ^ _REG has no corresponding Operation Region
Change-Id: I801a84468097687c91d6ee3f44cec06243355fac
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12531
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Add an empty Operating Region for the empty _REG method
- Serialize _CRS Method
- Remove Kconfig default disabling IASL warnings as errors
Fixes IASL Warning and remark:
dsdt.aml 1451: Method (_CRS, 0)
Remark 2120 - ^ Control Method should be made Serialized
(due to creation of named objects within)
dsdt.aml 1460: Method (_REG, 2)
Warning 3079 - ^ _REG has no corresponding Operation Region
Change-Id: I4aa59468a89c4013146ab34004476a0968c60707
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12521
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I9a00bdbcd47804b6d83c0231cd515773d02ff951
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12527
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I45b04e8fbdfc65603e1057f7b0e5a13d073fe348
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12048
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
If any path in a method returns a value, IASL expects that all paths
within that method will return a value.
Presumably, the ATPX would not need a return value if Arg0 is anything
other than 0, so just return a zero.
- Serialize ATPX method to make IASL happy. This means that it can
only be used by one thread at a time.
Fixes these issues:
dsdt.aml 2581: Method (ATPX, 2, NotSerialized) {
Remark 2120 - ^ Control Method should be made Serialized
(due to creation of named objects within)
dsdt.aml 2581: Method (ATPX, 2, NotSerialized) {
Warning 3115 - ^ Not all control paths return a value (ATPX)
Change-Id: I14aeab0cebe4596e06a17cffc36cc01b953d7191
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12518
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Touchpad and Touchscreen _CRS methods do not return an interrupt
value if the I2c busses that the devices are on are not in PCI mode.
Previously they didn't return any value if they weren't in PCI mode.
This patch has them return an empty resource template.
Fixes these warnings:
dsdt.aml 2813: Method (_CRS)
Warning 3115 - ^ Not all control paths return a value (_CRS)
dsdt.aml 2813: Method (_CRS)
Warning 3107 - ^ Reserved method must return a value
(Buffer required for _CRS)
dsdt.aml 2832: Method (_CRS)
Warning 3115 - ^ Not all control paths return a value (_CRS)
dsdt.aml 2832: Method (_CRS)
Warning 3107 - ^ Reserved method must return a value
(Buffer required for _CRS)
Change-Id: I02a29e56a513ec34a98534fb4a8d51df3b70a522
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12519
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Add an empty Operating Region for the empty _REG method
- Serialize _CRS Method
- Remove Kconfig default disabling IASL warnings as errors
Fixes IASL Warning:
dsdt.aml 1362: Method (_REG, 2)
Warning 3079 - ^ _REG has no corresponding Operation Region
Fixes IASL remark:
dsdt.aml 1353: Method (_CRS, 0)
Remark 2120 - ^ Control Method should be made Serialized
(due to creation of named objects within)
Change-Id: Iff01613a6e3238469c1fcb8d74f5e98d18420aaf
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12515
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If any path in a method returns a value, IASL expects that all paths
within that method will return a value.
Presumably the MKHP method wouldn't get called unless there were a
pending event, but if no event is found, return a zero.
Fixes IASL warning:
dsdt.aml 1785: Method (MHKP, 0, NotSerialized)
Warning 3115 - ^ Not all control paths return a value (MHKP)
This was the only IASL warning in most lenovo mainboards.
Change-Id: Id93dcc4a74bd4c18b78f1dde821e7ba0f3444da3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12517
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The SIO device needs to provide an _ADR object with the IO
address as well as the address in the OperationRegion.
ACPI provides two different Resource Descriptor Macros to describe the
I/O areas required for a device. The FixedIO macro is only valid for
10-bit IO addresses. Use the IO macro instead.
Thank you to recent IASL that allows for addition in the ASL file. :)
Fixes these warnings:
dsdt.aml 2276: Device (SIO) {
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
dsdt.aml 2390: FixedIO (0xa00, 0x34)
Warning 3060 - ^ Maximum 10-bit ISA address (0x3FF)
dsdt.aml 2394: FixedIO (0xa00, 0x34)
Warning 3060 - ^ Maximum 10-bit ISA address (0x3FF)
Lumpy now compiles its ASL tables with no warnings. Re-enable
Warnings as errors.
Change-Id: Id26e234eadaa3b966e8f769cb9f9fb7ea64fc9e3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12520
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Add an empty Operating Region for the empty _REG method
- Serialize _CRS Method
- Remove Kconfig default disabling IASL warnings as errors
dsdt.aml 1445: Method (_CRS, 0)
Remark 2120 - ^ Control Method should be made Serialized
(due to creation of named objects within)
dsdt.aml 1454: Method (_REG, 2)
Warning 3079 - ^ _REG has no corresponding Operation Region
Change-Id: I2b64609c929af62c2b699762206e5baf58fbdb8b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12523
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The function delay in uart8250mem.c is not enough for hudson. I guess
there are some problems in lapic_timer(). I uploaded a patch to gerrit
to show the way to enable UART feature.
http://review.coreboot.org/#/c/12343/4
Currently the HUDSON_UART is unchecked by default. Select HUDSON_UART to
enable this feature.
The UART is test at BIOS stage.
Since it is not a standart UART device, the windows internal UART driver
doesnt support it. I guess we need a driver to use it on windows.
Change-Id: I4cec833cc2ff8069c82886837f7cbd4483ff11bb
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11749
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add options to control cache partitioning and overall memory
performance via nvram.
Change-Id: I3dd5d7f3640aee0395a68645c0242307605d3ce7
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12041
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ia24102e164eb5753ade3f9b5ab21eba2fa60836b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12046
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I2083d0c5653515c27d4626c62a6499b850f7547b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12044
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I3963d145f6d209e32256268259e93103c62809c5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12504
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
We've actually got more warnings now than when I first tested IASL
warnings as errors. Because of this, I'm adding it with the option
to have it disabled, in hopes that things won't get any worse as we
work on fixing the IASL warnings that are currently in the codebase.
- Enable IASL warnings as errors
- Disable warnings as errors in mainboards that currently have warnings.
- Print a really obnoxious message on those platforms when they build.
***** WARNING: IASL warnings as errors is disabled! *****
***** Please fix the ASL for this platform. *****
Change-Id: If0da0ac709bd8c0e8e2dbd3a498fe6ecb5500a81
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10663
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Certain older Opteron processors use a higher (+1.2V) northbridge
voltage. The existing code assumed the use of +1.1V northbridge
voltages and threw an alert when the older Opterons were installed.
Update the permissible NB voltage range to include both the 1.1V
and 1.2V Opteron processors.
Change-Id: I35c90f37d180f59c53d0d2bf3ff0eaf985b26da3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12507
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ifa1592d26ba7deb034046fd3f2a15149117d9a76
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12027
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This makes the same changes to the LPDDR3 configuration that
were made for Samsung modules:
- Enable ODT function
- Change DS to 40 from 34.3
BUG=chrome-os-partner:47416
BRANCH=firmware-veyron-6588.B
TEST=Boot on mickey elpida board
Change-Id: If8c729188803dd854dbbe80539fb228636b5eb9f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b3eb8bc31b9727b67a6b53b4370315010d9d6379
Original-Change-Id: I2d54d3087ecd3536469866f30e4eb2d8b1acd5c1
Original-Signed-off-by: jiazi Yang <Tomato_Yang@asus.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311153
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311855
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12484
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Clear the precomputed checksums in hwinfo as they
will be updated in manufacturing process.
Change-Id: I952ca8f1ca32831c4b296de633c0d58da111ccba
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/12475
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This is the initial version of README.
AMD provides stable Bettong code in github. Add the link and bug fixed
list to README.
Change-Id: Ie8b761096fd1850afb9363ebb761aa4992b47643
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/11737
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
1. Use write_pci_int_table to write registers 0xC00/0xC01.
2. Add GPIO, I2C and UART interrupt according
"BKDG for AMD Family 15h Models 60h-6Fh Processors",
50742 Rev 3.01 - July 17, 2015
3. The interrupt valudes are moved from bettong/mptable.c.
All devices work in Windows 10.
Change-Id: Iad13bc02c84a5dfc7c24356436ac560f593304d7
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/11746
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
These platforms needed to be adjusted to fix various Kconfig warnings.
Both platforms needed MAINBOARD_HAS_NATIVE_VGA_INIT because they're setting
MAINBOARD_DO_NATIVE_VGA_INIT.
veyron_emile needed a few symbols that depend on CHROMEOS to be moved
into a new config CHROMEOS section. This matches the other CHROMEOS
platforms.
veyron_danger needed to select MAINBOARD_HAS_CHROMEOS before the
CHROMEOS symbol was set.
Change-Id: I8c7f594ba572a02513a68095c16314006fb4e379
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12462
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
EC_SOFTWARE_SYNC depends on CHROMEOS, so move it into the CHROMEOS section.
This fixes the kconfig warning:
warning: (CHROMEOS && BOARD_SPECIFIC_OPTIONS ...) selects
EC_SOFTWARE_SYNC which has unmet direct dependencies
(MAINBOARD_HAS_CHROMEOS && CHROMEOS && VBOOT_VERIFY_FIRMWARE)
Change-Id: I459f48fd18c7568c4584df7d4aefa69dec3e4907
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12460
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ibefc9dc2e1e0267389eb8d716408bae6026ce084
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12024
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The existing code for the Lenovo T400 works without changes on the
Lenovo R400. Same HDA verbs are provided by Lenovo BIOS on both
laptops.
Change-Id: I1dadddd7250ab80a4c40c2435865d72e3e5d99c9
Signed-off-by: Michał Masłowski <mtjm@mtjm.eu>
Signed-off-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-on: http://review.coreboot.org/8393
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
only enable pcie gpp clocks when the corresponding clkreq pin is asserted
Change-Id: I7822d011bb94867d470c0194e6b652833c395cb2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/12353
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
disable unconnected FCH clock outputs to save some power
Change-Id: Ib3efebb8656392d58d762c23827168017d273de8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/12082
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This fixes Family 15h multiple package support; the previous code
hung in CAR setup and romstage when more than one CPU package was
installed for a variety of loosely related reasons.
TEST: Booted ASUS KGPE-D16 with two Opteron 6328 processors
and several different RDIMM configurations.
Change-Id: I171197c90f72d3496a385465937b7666cbf7e308
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12020
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Merlin Falcon's FCH has GPIO, UART and I2C. All of them are controlled
by registers mapped at MMIO space.
This ASL code is used for Windows drivers.
TEST:
1. Boot Windows 8 or Windows 10.
2. Install AMD Catalyst driver.
3. AMD FPIO, UART and I2C can be found in device manager.
4. I2C passed Multi Interface Test Tool (MITT) test.
Change-Id: I7ffe3fe0046d9a078cc38176c29a8e334646a5a3
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11750
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Emile has a on board ethernet.
BUG=chrome-os-partner:47465
TEST=vpd -s ethernet_mac0=001122334455
build and check the MAC address
Change-Id: I90ed0ed1253c804568fcdd3dd212bb062a48c836
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 99b275c594196de0811f68380e66c226d2649927
Original-Change-Id: I1690a1f39090c57c64d4965092c80eef9070babf
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311900
Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12452
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
On one particular TV the TV was holding SDA low when it came up. It
would release the SDA when the SCL went low the first time.
Unfortunately the HDMI i2c port wouldn't transmit until the SDA was
released.
Let's detect this case and insert a bogus clock pulse to try to get the
other side to release SDA.
It's unclear why the kernel doesn't have this problem.
BRANCH=none
BUG=chrome-os-partner:46256
TEST=Insignia TV works now
Change-Id: Ic9d27eb69bdc9c5fb11a68258e0c755cdc8b79d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 356ee7503f04e741a41be37ad573b588067b7114
Original-Change-Id: I4b6361877e0576cc4ea2f643f073f1aab660e434
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309258
Original-Reviewed-by: Agnes Cheng <agnescheng@google.com>
Original-Commit-Queue: Agnes Cheng <agnescheng@google.com>
Original-Trybot-Ready: Agnes Cheng <agnescheng@google.com>
Original-Tested-by: Agnes Cheng <agnescheng@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309546
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12451
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Kernel needs to set Audio IRQ as wake capable.
BUG=None
BRANCH=None
TEST=emerge-lars coreboot
Change-Id: Ib7f0fc52baa006d992a2f91a63417e3f76817634
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 32d82ac48c6f830fbb09b776d0adaf6b7a727416
Original-Change-Id: I3fd70ac99c623a99b07fa1a185ebace8c1fc3d69
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312172
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12450
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch enables GPP_B5 as ACPI_SCI for wake.
It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW.
BUG=none
BRANCH=none
TEST=emerge-lars coreboot
Change-Id: I2b65f6a37783ecdbdbc32ebe613243e042c865e9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ec5b629f920984564f12f2c09458ed300d031f69
Original-Change-Id: I9bd2b3595ae833fa5d07d97a7cda4a29041be837
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311890
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/12449
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Use the keyboard backlight to provide indication that the system is
booting. This is useful for determining that a system is in S0 and
is running BIOS code.
BUG=chrome-os-partner:47435
BRANCH=none
TEST=boot on chell and see keyboard backlight come on early
Change-Id: I43e699bcc2f34998d3d6ce33ce72c7b04b55c146
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a3a0147b6de681365a9c995175076d5f397016fb
Original-Change-Id: I2441c28431e71b13b70e6533e175d29ccfd8d7e9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312358
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12448
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The GPIO for USBA_1_ILIM_SEL_L should be low to enable 2A charging
from the Type-A port.
BUG=chrome-os-partner:47172
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I1bbcdd467684e7c1372c8ca862d498fb6cbb966c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c8a8fbed6d0fd7aea0a41db2bde104fe7a05cabe
Original-Change-Id: I3b18cbb204cfa19e50f34ea9533018e286342513
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312451
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12447
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
For the rails controllable by the host processor through
gpios turn them off in the sleep paths. The result is that
S3 and S5 will turn off those rails.
BUG=chrome-os-partner:47228
BRANCH=None
TEST=Built for chell.
Change-Id: I5843f13be43a6ec143600585a5a0c47563e533dd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ddd5860dc0cfee68ec2f77f4931665740bede08c
Original-Change-Id: Ife0e2fb11373dd129e20b914b45cd5b56c3493f7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312321
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12446
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
For the rails controllable by the host processor through
gpios turn them off in the sleep paths. The result is that
S3 and S5 will turn off those rails.
BUG=chrome-os-partner:47228
BRANCH=None
TEST=Built and booted glados. Suspended and resumed.
Change-Id: I6d45683b64ca5f7c3c47e11f95951bd2d9abf31e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ed432e2b5535da6f872a53b76886d983f00b4e8e
Original-Change-Id: I94d7e0b00bf7e7da8dc59f299e41b72e8fcb64f4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312320
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12445
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
By calling cbmem_recovery() with `0`, we rewrote the cbmem table even
on the resume path. By that, we lost the OS' resume vector and ended up
loading the payload.
Change-Id: Ic24a12d4143d6924321b1d01f07a467c58c4e9ea
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/12420
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since there are no longer any newisys mainboards, remove the directory
and Kconfig files. This removes the Kconfig warning:
mainboard/newisys/Kconfig:3:warning: config symbol defined without type
Change-Id: Icb2e782173166a26fa261f6cfb81b665a846931e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12423
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Kernel needs to set Audio IRQ as wake capable.
BUG=chrome-os-partner:47450
BRANCH=NONE
TEST=System wakes up from S0ix by pressing headset buttons.
Change-Id: I0f89d05b4c5449e5e3277dde938d941e4ad8cbea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 65bf434f7c7e1662211f9c8bf61eeb4f41bdc675
Original-Change-Id: I7b5b564023044b4458eb0976488018b3226f4c70
Original-Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311793
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12414
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I2f2658eb8b3142c86fef4ee50792f51954686cca
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12409
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I12323d76ab90f643f4dd4351d7e99824ec24f9be
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12408
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The plugged devices on PCIe should use IOAPIC2 instead of standard
IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1.
The unchanged code worked because the OS uses MSI instead APIC.
To test that, boot linux with parameter pci=nomsi and see if the devices
like NIC work well as they do without the booting parameter.
run 'cat /proc/interrupts' to see if devices actually use
no-msi.
Change-Id: I5eab28956b7a3fbc7c10447e99d6c11dbe6a1d14
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12363
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The plugged devices on PCIe should use IOAPIC2 instead of standard
IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1.
The unchanged code worked because the OS uses MSI instead APIC.
To test that, boot linux with parameter pci=nomsi and see if the devices
like NIC work well as they do without the booting parameter.
run 'cat /proc/interrupts' to see if the devices actually use
no-msi.
Change-Id: Id6d35224312aeb6e3a175ec9990e0bb34bad67e7
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12362
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I6eba36dad71a2a2713181382484dc0e0976e1dad
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11988
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I9a7049fd5601da10a954e02427ad59189fa93fa9
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12407
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If839fd71ed12c1fe27aeab374e242a6855737f5d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11994
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
o. Make some gpio changes base on Emile spec.
o. Init sdmmc function.
o. Revert cpu freq reducing in recovery mode since Emile
have more effective thermal than Mickey.
o. Revert the changes of lpddr3-samsung-2GB config.
BUG=chrome-os-partner:46658
TEST=build and boot on Emile
BRANCH=veyron
Change-Id: Ibdc2ce511c8e215c202e2067d79f4c60cdfca738
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 39e5436c8aa3353af77f62e548f48d19dc722999
Original-Change-Id: Ib2c78c9b5e3ac6620ab1772879a7ea0f7007f96e
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307651
Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12396
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch enables GPP_B5 as ACPI_SCI for wake.
It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW.
BUG=chrome-os-partner:43491
BRANCH=none
TEST=Build for kunimitsu. Tested wake from touchpad on a reworked kunimitsu board.
Change-Id: I4347be8f7a4552c6b583f0797fab64045aa9792e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8c21f3b5df21d96937975dc20ee5e2f83fb3d75e
Original-Change-Id: I76e69bdba81ec22ae67c7cff3a807cea8c54a5b3
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311007
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
