summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-05-11nb/intel/i945: Define and use a default MMCONF_BASE_ADDRESSArthur Heymans
Change-Id: I15550b1cc1a7ccfecba68a46ab2acaee820575b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-11siemens/mc_apl1: Correct GPIO settingsMario Scheithauer
- set GPIO_183 to high level for enabling the power of SD card - delete all GPIOs for JTAG interface because they lead to problems with Lauterbach debug hardware Change-Id: I24bfff479601933c43e3dcbfa3baa49510831703 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-05-11google/gru: support 800M/928M frequency for bobCaesar Wang
The coreboot had no supported the different frequency for gru yet. e.g: we can't support the bob to run ddr 800M for rev3 board and run 928M for rev4 board. So, in order to support the 800M and 928M ddr frequency for bob different boards. We will use the ram_id and board_id to select the board on bob. Change-Id: I613050292a09ff56f4636d7af285075e32259ef4 Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-11rockchip/rk3399: enable DPLL SSC for DDR EMI test on bobCaesar Wang
Spread Spectrum Modulator (SSMOD) is a fully-digital circuit used to modulate the frequency of the Silicon Creations’ Fractional PLL in order to reduce EMI. We need to turn the DPLL spread spectrum feature on to reduce the EMI noise for DDR on bob. Change-Id: I75461d4235bcf55324e6664a1220754e770b4786 Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-10mb/lenovo/s230u: fix sata port map for the msata portpersmule
s230u seems only have two sata ports: one for the 2.5in hdd and one for msata. map 0x11 (port 0 & 4) enables hdd but not msata, and map 0x5 (port 0 & 2) enables both. Change-Id: I1e9e96f0d0849b1e8c4e02aa4f686ceb5e10b3ab Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-05-09mb/gigabyte/ga-b75m-d3h: Add tpm support for its onboard tpm socketBill XIE
Tested against a lenovo-manufactured tpm 1.2 module: a /dev/tpm0 visible inside GNU/Linux, but there is no menu items in SeaBIOS' interface, which seems a common issue of SeaBIOS on ivb boards. Change-Id: Id0dee74d945bae5d77eb669d8b9d468a67aee508 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19521 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-09superio/ite/it8728f: Hook up common environment-controller driverTobias Diedrich
This replaces the custom environment controller handling in the it8728 driver with the common library. It also updates the two existing boards with hwm register settings in their devicetree config so they better match their vendor BIOS fan control settings. Change-Id: Idf0c8908ba5ad6ff552b8302bffc638aa9052941 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/19293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-05-09google/sand: Add keyboard backlight supportKatherine Hsieh
BUG=None TEST=emerge-sand coreboot chromeos-bootimage and verify the keyboard backlight can be bright and alt+f6, alt+f7 function keys can be used. Change-Id: I86a35551a9348ff6ad26dfccd3b2786282d56069 Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/19479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-08mainboard/intel/galileo: Add SD controller configurationLee Leahy
Configure the SD controller to handle the SD card slot. * Galileo supports a removable SD card slot. * Set SD card initialization frequency to 100 MHz. * Set default removable delays. * Build SD/MMC components by default TEST=Build and run on Galileo Gen2 Change-Id: Iaf4faa40fe01eca98abffa2681f61fd8e059f0c4 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/19212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-08mb/google/reef: enable SAR and DSARWei-Ning Huang
Enable SAR and DSAR for reef. BUG=b:37612675 TEST=`emerge-reef coreboot` Change-Id: Ie0a59f8fcc9fb104328ee6d276ecab4193ec8eb8 Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Reviewed-on: https://review.coreboot.org/19579 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-05mb/google/poppy: Add eMMC as thermal sensorSumeet Pawnikar
This patch adds the eMMC as one of the thermal sensor under DPTF. Also, updates few comments for better interpretation and mapping. BUG=None BRANCH=None TEST=Built for poppy. Change-Id: I6d05bb7a2f857dc5bc98227c8327b2ff1bd5b913 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/19524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-05-05Revert "google/scarlet: Enable innolux,p079zca MIPI panel"Martin Roth
This reverts commit 39b633b26d6d4cf185fbbdd5a256d0665409bd5b. Commit was accidentally pushed too early and broke the tree. I'll repush the original. Change-Id: Iaca6d43cc8fc0959565d5d151a330c0c7ba38309 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-05google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
TEST=Boot from scarlet, and mipi panel work Change-Id: Id5f81867ea50f72cc0bc13074627134e0dc198ba Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-05mainboard/google/sand: Update DPTF parameters provided from thermal teamKatherine Hsieh
Update the DPTF parameters based on thermal test result. 1. Update DPTF CPU/TSR0/TSR1/TSR2 passive/critial trigger points. CPU passive point:83, critial point:99 TSR0 passive point:60, critial point:70 TSR1 passive point:50, critial point:90 TSR2 passive point:77, critial point:90 2. Update PL1/PL2 Min Power Limit/Max Power Limit Set PL1 min to 4W, max to 12W, and step size to 0.2W 3. Change thermal relationship table (TRT) setting. Change CPU Throttle Effect on CPU sample rate to 5secs Change CPU Effect on Temp Sensor 0 sample rate to 60secs The TRT of TCHG is TSR1, but real sensor is TSR2. sample rate to 30secs Change Charger Effect on Temp Sensor 2 sample rate to 30secs Change CPU Effect on Temp Sensor 2 sample rate to 120secs BUG=None TEST=build and boot on electro dut Change-Id: I0ea0bab7fa6b0ad75d9ddacbd7cd882f91e4b0db Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/19538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05google/fizz: Enable devices under pci 1c.0Shelley Chen
Turn on device 1c.0 in order to enable devices under it. BUG=b:37486021, b:35775024 BRANCH=None TEST=Boot from NVMe Change-Id: Ide66823283c58d2bea0c9886f762f0581741affe Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19533 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05mainboard/google/poppy: Enable MODE_CHANGE event in SCI_MASKFurquan Shaikh
This is required to ensure that SCI is generated whenever a host event is set for MODE_CHANGE. Thus, when wake from MODE_CHANGE event occurs, eSPI SCI is generated which results in kernel handler reading host event from the EC and thus causes the wake pin to be de-asserted. BUG=b:37223093 TEST=Verified that wake from mode change event works fine in suspend mode and there is no interrupt storm for GPE SCI after resume. Change-Id: I1dd158ea0e302d5be9bcaa531cd1851082ba59fd Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jenny Tc <jenny.tc@intel.com>
2017-05-05mainboard/siemens/mc_apl1: remove unnecessary headerAaron Durbin
soc/i2c.h does not need to be included in this compilation unit. Change-Id: Ife11642d2e69af7235c93fc54bba38853b046169 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-05-04mb/gigabyte/ga-b75m-d3h: add libgfxinit supportpersmule
Currently native video init works on port HDMI1 (wired to the on-board DVI-D socket) , HDMI3 (the on-board HDMI port), and the VGA port, both text mode and fb mode. Every ports works on GNU/Linux. Tested against an IVB cpu (i7-3770T). Change-Id: If00a7247df0c32b3d1f489fb92d86baaa8fdf8ba Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-04mb/lenovo/x200: Make button on dock to undock workArthur Heymans
Fetched from vendor DSDT. Change-Id: Ib74408802e977d9caabcb815c9cbd06bd8dbe395 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kevin Keijzer <kevin@librepractice.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-05-04mb/google/eve: Remove code to set keyboard backlight at bootDuncan Laurie
Remove the code that was enabling the keyboard backlight at boot since this is not desired behavior for this device. BUG=b:35581264 TEST=build and boot on Eve and ensure keyboard backlight does not turn on when booting but can still be enabled in the OS. Change-Id: I7229cf962597c0de74dc005f7afb9408f7a66f42 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-04mb/google/eve: Set SUSWARN# pin to native functionDuncan Laurie
Set GPP_A13/SUSWARN# pin mode to native function 1. This pin is tied to SUSACK# in the schematic and and is intented to be used in Deep Sx so it should not be configured for GPIO mode. BUG=b:35581264 TEST=build and boot on Eve platform, test that Deep S3 and Deep S5 are still functional. (this change should have no visible effect) Change-Id: Ie2dc24d095872ab93a5bfcbe5307c3b7a8e4dbcc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
Board Scarlet doesn't use usbphy1. BUG=b:37685249 TEST=boot Scarlet, check the firmware log, and confirm no errors about USB1 Change-Id: I66e0d8a235cc9057964f7abca32bc692d41e88fd Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/19489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-03nb/intel/gm45: Set display backlight according to EDID stringArthur Heymans
Add some known good values for some thinkpads displays. Known good means that at this pwm frequency the display is evenly lit on all duty cycles, the display makes minimal to no noise at lower duty cycles and the display does not flicker. This values differs from vendor (which uses an obviously wrong display clock (190MHz instead of 320MHz) resulting in frequency more than 60% off the intended value. TESTED on Thinkpad X200 with edid ascii string in list and removed from list to see if notice message is shown. Change-Id: Id7bc0d453fac31e806852206ba2c895720b2c843 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-03mainboard/google/poppy: Add support for cr50 I2C TPMFurquan Shaikh
1. Add support for using cr50 I2C TPM on poppy. This will not be enabled until the next build. 2. Also, configure GPIOs for SPI and I2C TPM only if the corresponding Kconfig options are set. BUG=b:36265511 TEST=Verified on a reworked board that I2C TPM communication works fine. Change-Id: I3b293b8d410a6973a6dfea393c17d0be425b6a28 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-03mainboard/google/poppy: Update GPIO table for next buildFurquan Shaikh
Update GPIO table to match the schematics for next build. Change-Id: I949a14bfaa7972f2257a0b11ee81dcb0771e2f7f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-01mb/*/mainboard.c: Get rid of SPI AFC registerPatrick Rudolph
The AFC—Additional Flash Control Register is set by southbridge code. Remove redundant calls and get rid of it in autoport. Change-Id: I627082e09dd055e3b3c4dd8e0b90965a9fcb4342 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19493 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01mainboard: add support for lenovo x1 carbon gen 1Alexander Couzens
Based on Thinkpad x230 and schematics. Verified by autoport. USB debug port is the left front usb port Thanks to Holger Levsen for the device. Change-Id: I97c8e01a3ce0577d7dc9e8df7d33db3b155fe3d6 Tested-on: lenovo x1 carbon gen 1 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16994 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-01acpi: fix FADT header version for ChromeOS devicesMatt DeVillier
Haswell, Broadwell, Baytrail, and Braswell ChromeOS devices' FADT version were incorrectly set to 3, rather than the correct ACPI_FADT_REV_ACPI_3_0. The incorrect value resulted in these devices reporting compliance to ACPI 2.0, rather than ACPI 3.0. This mirrors similar recent changes to SKL and APL SoCs. Test: boot any affected device and check ACPI version reported vai FADT header using OS-appropriate tools. Change-Id: I689d2f848f4b8e5750742ea07f31162ee36ff64d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19498 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-05-01intel/kblrvp: Enable audio in RVP7 and RVP3Naresh G Solanki
Enable audio: * Add verb table for ALC286 & ALC298 * Enable virtual channel 1 for DmiVc1 & HdaVc1. TEST= Build for kblrvp3 as well as kblrvp7. Boot to OS & verified working of audio on both the boards. Change-Id: Id27e3cf585b93ed4131d7bf3d3b53d3f5404b18e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/18875 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-01purism/librem13: Enable support for M.2 NVMeYouness Alaoui
Enable/Disable the PCIe ports to match factory BIOS. The port #6 is used for PCIe on the M.2 connector which allows for NVMe SSDs to function. Change-Id: I8058cbad3da651144545d588c0ae78c5f5e598ac Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19446 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-29rowan: Fix default test HWID.Patrick Berny
Correct the default GBB_HWID to "ROWAN TEST 9387" BRANCH=chromeos-2016.05 BUG=b:35774871 TEST=emerge-rowan coreboot chromeos-bootimage, strings /build/rowan/firmware/image.bin | grep "ROWAN TEST" and look for 9387 in output Change-Id: I7851010305caf056958c8a6a328b0506bf2208cd Signed-off-by: Patrick Berny <pberny@chromium.org> Reviewed-on: https://review.coreboot.org/19488 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-28mainboard/google/soraka: Add support for memory configs 1,2,7 and 8Furquan Shaikh
BUG=b:37712455 Change-Id: I3209aaef774712edab5e9f656ee84bfb6917b1c1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19472 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-28mainboard/google/poppy: Add SPDs for memory config 1 and 2Furquan Shaikh
BUG=b:37712790 Change-Id: I7764b4ec55b0beea82eeb6c379ef38ceeb1fb04e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19471 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28mainboard/google/poppy: Enable separate MRC cache for recovery modeFurquan Shaikh
Enable separate MRC cache for recovery mode. This requires change in flash layout to accomodate another region for RECOVERY_MRC_CACHE. BUG=b:37682566 TEST=Verified following scenarios: 1. Boot into recovery does not destroy normal mode MRC cache. 2. Once recovery MRC cache is populated, all future boots in recovery mode re-use data from the cache. 3. Forcing recovery mode to retrain memory causes normal mode to retrain memory as well. Change-Id: I4c748a316436001c5a33754084ab4a74243e21df Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19457 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28nb/amdk8: Link coherent_ht.cArthur Heymans
Change-Id: I1ef1323dc1f3005ed194ad82b75c87ef41864217 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19367 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28sb/nvidia/mcp55: Link early_ctrl.cArthur Heymans
Change-Id: I3a55c2e8077fdb10768df287f38efcd5e2e64bdf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19365 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28nb/amd/amdk8: Link reset_test.cArthur Heymans
This needs some extra headers in amdk8/raminit.c that were otherwise provided by that file. Change-Id: I80450e5eb32eb502b3d777c56790db90491fc995 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19360 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28google/gru: tpm on bob: cr50: add irq clear/irq status for tpm irqJeffy Chen
BUG=b:35647967 TEST=boot from bob Change-Id: I756513f02ac13e159d5b8b1ac2346fa42cf3c219 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cf18ed7b8fdf11594f812e5c48a2bd0fde5cb820 Original-Change-Id: I50c053ab7a6f6c14daee4fb2ab1cdcaeee2d67da Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/452286 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19434 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-28google/oak: Configure SD card detect pin with a pull-upJulius Werner
SD card detect pins should normally have a pull-up. It seems that for micro-SD cards this doesn't really matter all that much, but for the full-size slots we have on some Oak-derivatives (like Hana) it does. BRANCH=oak BUG=b:35854317 TEST=Booted Hana, confirmed that card detect no longer seemed stuck-on. Booted Elm and confirmed that SD card behavior didn't change. Change-Id: I9b20e0f6fe310e724d191e36ca0a81ab4fe5f593 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c2781eeef50f52c6f02ee9344274ddf4dcb0a946 Original-Change-Id: I428ac92efb07f94265673b04e0e0dd452649b9fd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/452861 Original-Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/19432 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-27mb/google/eve: switch touchpad devicetree to i2c-hid and cros_ec i2c deviceWei-Ning Huang
The new touchpad firmware uses i2c-hid instead of custom reporting protocol. The touchpad also exposed another slave address (0x1e) for kernel to communicate with the touchpad EC. Change-Id: Iecaf14f7b8aed836120569e9ade9c3115bc00264 Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Reviewed-on: https://review.coreboot.org/19461 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-04-27google/poppy: Enable PD MCU deviceShamile Khan
In order for PD charge events to properly notify the OS when a charger is attached we need to enable the PD MCU device and event source from the EC. Without this change the charging still happens, but the OS does not notice and update the charge state icon in the Chrome OS UI. BUG=b:35586577 BRANCH=none TEST=On a poppy board that has the VBUS rework applied, plug in a charger to either port and see charge status updated to indicate charging in the power_supply_info tool and the Chrome OS UI. Change-Id: I59dcfc1cb5d11841f56cac7f4ffe461c2f9ec52a Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/19441 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-04-27nb/amd/amdk8: Link raminit_f.cArthur Heymans
For this debug.c needs to be linked too. Change-Id: I9cd1ffff2c39021693fe1d5d3f90ec5f70891f57 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19030 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-27google/fizz: Configure HDMI HPD to use native functionShelley Chen
BUG=b:37684299, b:35775024 BRANCH=None TEST=reboot and ensure graphics are displayed through HDMI port. Change-Id: I74a664b2d42f55adfa64f292f6ede4c956e16fbf Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19451 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-27google/fizz: Enable SATA on port 1Shelley Chen
BUG=b:37486021 BRANCH=None TEST=compile coreboot and make sure sda and sdb show up in /sys/class/block. Change-Id: I11344a4a5fc7e5b5d907d25439f92744a5fb70da Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19450 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-26mb/intel/d510mo: Add romstage timestampsArthur Heymans
Change-Id: I324edce44ad82217ac1fba177f4a0bb3c799308c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19426 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-26mb/intel/d510mo: enable ACPI resume from S3Arthur Heymans
Replace ram_check with quick_ram_check, because ram_check is slow and is destructive for dram content. Change-Id: I5fb1bfe711549aabb6e597bda22848988a7e9cbe Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19416 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-25AMD Geode: Move conflicting mainboard_romstage_entry()Marc Jones
The silicon specific mainboard_romstage_entry() in amd/cpu/car.h, which is used by all AMD silicon car code, caused a conflict. Move the silicon specific defines to silicon header files. Also, no longer include car.h in the romstage file. Change-Id: Icfc759c4c93c8dfff76f5ef9a1a985dd704cfe94 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/18769 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-25lib: provide clearer devicetree semanticsAaron Durbin
The devicetree data structures have been available in more than just ramstage and romstage. In order to provide clearer and consistent semantics two new macros are provided: 1. DEVTREE_EARLY which is true when !ENV_RAMSTAGE 2. DEVTREE_CONST as a replacment for ROMSTAGE_CONST The ROMSTAGE_CONST attribute is used in the source code to mark the devicetree data structures as const in early stages even though it's not just romstage. Therefore, rename the attribute to DEVTREE_CONST as that's the actual usage. The only place where the usage was not devicetree related is console_loglevel, but the same name was used for consistency. Any stage that is not ramstage has the const C attribute applied when DEVTREE_CONST is used. Change-Id: Ibd51c2628dc8f68e0896974f7e4e7c8588d333ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19333 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-25google/gru: change the sd power sequenceCaesar Wang
In the safety considerations, we should make sure the slot of SD is enabled first, since we want to the power switch of corresponding is powered up. The different boards have the different power switch for sdmmc. Some power switch IC need turn on delay for long time. let's move the slot power of SD to romstage and avoid explicit delays or per-board. BRANCH=none BUG=b:35813418, b:35573103 TEST=check the signal for children of gru, and boot up from sd card. Change-Id: Id164e4c4c900c6b1ca0251fc27db4cd36c56f6ff Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ea1b01cc13628033b85251dbb44407f075efdc85 Original-Change-Id: I48ab543143d3de9be46608fc12d78e09decf8d79 Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/447076 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19430 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-25mainboard/amd/gardenia: Remove PMxEE write on S4 resumeMarc Jones
Delete the write to PM register 0xee. This register is not listed in the current BKDG and S4 is not currently supported on this APU. NDA document #47517 "A55/.../A85X fusion Controller Hub Register Reference Guide" provides some clues on the intent of this write. This register has always been observed to power on with a value of 0x08 so the write has no effect. This should be revisited again when SMI and PSP fully implement the support required for S3. Change-Id: I35e6c5f7ad1de7f51b018543d2f7ce82182f11e4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/18494 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-25google/oak: Enable dual DSI for rowan and the BOE 8-lane MIPI/DSI panelDaniel Kurtz
Unlike other oak derivatives, Rowan uses an 8-lane BOE tv097qxm-nu0 MIPI/DSI panel that requires dual DSI support. Rework oak display initialization to special case Rowan, which uses a provided edid struct for its panel, special panel backlight sequencing and needs to configure mtk_ddp and mtk_dsi to use dual dsi mode. BRANCH=none BUG=b:35774871 TEST=Boot Rowan in developer mode and see output on the panel Change-Id: I136ba5bd1ab12c4ad92995e066fc6d6cf54d0898 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19389 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-25mediatek/mt8173: Add support for Dual DSI outputJitao Shi
The MT817x display output pipeline can be configured to drive an 8-lane MIPI/DSI panel using "dual DSI" mode. For the "dual DSI" video data path, the UFO block is configured to reorder the data stream into left and right halves which are then sent by the SPLIT1 block to the DSI0 and DSI1 respectively. The DSI0 and DSI1 outputs are then synchronously clocked at half the nominal data rate by their respective MIPI_TX0/MIPI_TX1 phys. Also, update the call sites in oak mainboard to avoid build breakage. BRANCH=none BUG=b:35774871 TEST=Boot Rowan in developer mode and see output on the panel Change-Id: Id47dfd7d9e98689b54398fc8d9142336b41dc29f Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19361 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-25google/oak: Use edid_set_framebuffer_bits_per_pixelDaniel Kurtz
This helper function was introduced so that mainboards don't need to manually fill in these struct edid fields. BRANCH=none BUG=b:35774871 TEST=Boot Rowan in developer mode and see output on the panel Change-Id: Ic9404a786a28b314b710e037dcae776be4b584ca Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19388 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-24google/oak: Support cr50 over I2C on rowanVadim Bendebury
This patch enables TPM2 using cr50 over I2C for the Rowan board, and adds an mt8173 specific TPM IRQ polling function. The function relies on the appropriate EINT input configured to trigger the ready status on the rising edge. The cr50 TPM is on I2C address 0x50. The cr50 interrupt GPIO is also made available for use by depthcharge via the coreboot tables. BRANCH=none BUG=b:36786804 TEST=Boot rowan w/ serial enabled, verify coreboot and depthcharge are configured to use IRQ flow control when talking to the Cr50 TPM. Change-Id: If6cdd0e39e4ac86538f27f322c55c329179ee084 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19364 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-24mainboard/google/reef: Remove DRIVER_TPM_I2C_IRQDaniel Kurtz
DRIVER_TPM_I2C_IRQ has been removed. TPM_TIS_ACPI_INTERRUPT now specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot reef w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: If66a2a1d461a411e112589c84a434066d48b9399 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19410 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/eve: Remove DRIVER_TPM_I2C_IRQDaniel Kurtz
DRIVER_TPM_I2C_IRQ has been removed. TPM_TIS_ACPI_INTERRUPT now specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot eve w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: Ia1eacd15e71a46a37457ee2f117b156393c3393d Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19409 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/reef: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
TPM_TIS_ACPI_INTERRUPT specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot reef w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: Ic69add8a3ce35be64fb37db4ed40163f6144fc9c Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19408 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/eve: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
TPM_TIS_ACPI_INTERRUPT specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot eve w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: Ifeb09a0a35bff7cd9091f6d027f0065288ca35c9 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19407 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/poppy: use intel common tis_plat_irq_status()Aaron Durbin
Utilize the intel/common code for tis_plat_irq_status() to remove dependencies and code duplication on for bringing up a board requiring tis_plat_irq_status(). Change-Id: I2aaa1d7d3ce171dc1788438ff9990fce533deb6c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19371 Tested-by: build bot (Jenkins)
2017-04-24Kconfig: provide MAINBOARD_HAS_TPM_CR50 optionAaron Durbin
The CR50 TPM can do both SPI and I2C communication. However, there's situations where policy needs to be applied for CR50 generically regardless of the I/O transport. Therefore add MAINBOARD_HAS_TPM_CR50 to encompass that. Additionally, once the mainboard has selected CR50 TPM automatically select MAINBOARD_HAS_TPM2 since CR50 TPM is TPM 2.0. Change-Id: I878f9b9dc99cfb0252d6fef7fc020fa3d391fcec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19370 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-24nb/intel/pineview: Move to early cbmemArthur Heymans
TESTED on D510MO. Change-Id: I05aa40df0d2a090fcf734416669e9e1bbff094e4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19414 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-24nb/pineview/raminit: Fix raminit failing on hot reset pathArthur Heymans
For raminit to succeed on a hot reset the following things are prevented from running: * Clearing self refresh * Setting memory frequency * programming sdram dll timings * programming rcomp TESTED on Intel d510mo. Change-Id: I8f7e5c2958df29a96cdf856ade2f4f33707ad362 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19337 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-24mb/intel/d510mo/Kconfig: Don't override CBFS_SIZEArthur Heymans
There is no need to override CBFS_SIZE since there is no additional firmware needed on the flash. Also due to it having a description CBFS_SIZE was displayed twice in menuconfig, which is fixed by this. Change-Id: I1a8e2e458ac4d420f3fd4628c2805b6d4e2ee529 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19331 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-24mb/lenovo/x230: Enable libgfxinitIru Cai
Tested on X230 with an external screen connected to every one of the DP ports (miniDP on mainboard, two DP ports on dock), the GRUB payload can display on both the external screen and the internal LVDS screen. This is a copy-paste of I8e02c8003ff745d05ee272c59377174847f5219c. Change-Id: I8f270d558668c1fe41bcdcc7d6d2aa7f053c85b6 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/19412 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-24mb/google/fizz: Set lid status as openNaresh G Solanki
Lid switch is not available. Hence report lid state as always open. Change-Id: Ia9c82c3ad323912bad51cf55ed80a37b3110b1ef Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19219 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-04-24mb/google/fizz: Configure PCI root portNaresh G Solanki
Configure PCI root port as per schematic. Change-Id: I10ef682e8c54e22f328db5105d4da39c72ac2bed Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19390 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-24google/fizz: Configure memoryShelley Chen
Read DRAM SPD and populate MemorySpdPtr fields in UPD data structure for FSP. BUG=b:36490168, b:35775024 BRANCH=None TEST=./util/abuild/abuild -p none -t google/fizz -x -a We are currently working on bringup and have no hardware to test on yet. Change-Id: I191cc6bf1fd8aa461855c538b48fd39e3ffd7848 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19205 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-24mb/sapphire/pureplatinumh61: Update GMA configNico Huber
This board was added while the latest libgfxinit changes were in review. Update to make it compile again and sanitize the port list. Change-Id: I81b96e225945a8f8e47b64cefea91eb2747675ca Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19353 Tested-by: build bot (Jenkins) Reviewed-by: Nicola Corna <nicola@corna.info>
2017-04-24*.asl: Remove obsolete reference to TPM ASL filePatrick Rudolph
TPM ACPI entries are automatically generated, and the old static TPM ASL file is obsolete. Remove the reference to this obsolete static and empty ASL file. Delete src/drivers/pc80/tpm/acpi/tpm.asl. Change-Id: I6163e6d59c53117ecbbbb0a6838101abb468de36 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19291 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-21mb/lenovo/t420: Enable libgfxinitNico Huber
In the single GPU configuration, the T420 has an LVDS port, one DP++ and one VGA port connected to the IGD. Docking solutions feature up to two additional DP/DVI-D ports, also directly connected to the IGD. This makes the list of ports to probe pretty long (takes about 70ms if nothing but LVDS is connected). We could save about 20~30ms if we'd limit the ports in case we are not docked or have a discrete GPU. Change-Id: I8e02c8003ff745d05ee272c59377174847f5219c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19378 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-20mainboard/google/eve: Set touchpad IRQ to level triggeredDuncan Laurie
This commit changes the interrupt configuration for the touchpad to be level triggered so it matches what the device is actually using. When the system wakes from suspend by way of touchpad interrupt, or there is touchpad input while in suspend that does not wake the device (when the device is in tablet mode) the interrupt edge is not seen by the AP so the driver does not handle the event and the touchpad keeps the interrupt asserted and does not send further interrupts. The end result is a non-functional touchpad after resume until it is reset or the driver is reloaded. This happens because the touchpad is actually treating the interrupt as level triggered and expects the kernel driver to read a data packet over I2C before it will de-assert the pending interrupt. BUG=b:35774857 BRANCH=none TEST=Test that the system can reliably wake from suspend by touchpad event via the EC and continue to have a functional touchpad after resume. Change-Id: Iaf7c04d9bc9d945bdcc196dff54c92a2a68368f3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19382 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mb/asus/kgpe-d16: Enable TPM when selected in KconfigTimothy Pearson
Issue TPM startup on romstage completion via common LPC TPM code if the TPM was enabled in Kconfig. Change-Id: Id886d6aeefa045fb979f128b1cf4c10fff243b24 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/19338 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19google/gru: change kevin boot-time center logic voltage to 925mVDouglas Anderson
Kevin's center logic isn't super clean so it needs 925 mV for center logic. All newer gru variants only need 900 mV. BRANCH=gru BUG=b:37429075 TEST=Reboot tests Change-Id: I8c3bd6c245700b23c27cd5758c35c9993f801cb4 Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/479463 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19357 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-19google/gru: change center logic voltage to 900mVDerek Basehore
It seems that we should only ever run at 900mV on center logic. Changing it to 950mV before might have just masked over problems that are now fixed. BRANCH=none BUG=chrome-os-partner:56940 TEST=on kevin, run stressapptest -M 1536 -s 1000 Change-Id: I5a09b1b403df800396bb2f2e8c76d14a4519d44a Signed-off-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/391032 Reviewed-by: Douglas Anderson <dianders@chromium.org> Commit-Queue: Lin Huang <hl@rock-chips.com> Tested-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/19356 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-19mainboard/google/poppy/variants/soraka: add soraka boardYH Lin
Create Soraka board which derives from Poppy, a KBL reference board. More Soraka specific changes need to be done later on. BRANCH=master BUG=b:36995255 TEST=Build (as initial setup) Change-Id: I8af68d2cf475df56336aa0e3bebe86a54ece1999 Signed-off-by: YH Lin <yueherngl@chromium.org> Reviewed-on: https://review.coreboot.org/19343 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-19mainboard/google/poppy: Provide nhlt variant APIFurquan Shaikh
Move current NHLT configuration implementation to baseboard so that variants can leverage it or provide their own configuration. BUG=b:37375693 Change-Id: I2a4317c112f9e3614bd01eb6809727b73328d29d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19326 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Provide memory configuration variant APIFurquan Shaikh
Add support for memory configuration by providing weak implementation from the baseboard. All SPD files are present under spd/ directory. SPD_SOURCES must be provided by the variants to ensure that required SPD hex files are included in the SPD binary. BUG=b:37375693 Change-Id: Ic9bcc03d5a35bebd14061680f264ac072b3c0634 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19325 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Provide cros_gpio variant APIFurquan Shaikh
Add support for ChromeOS GPIO ACPI table information by providing weak implementation from the baseboard. BUG=b:37375693 Change-Id: I641afe6bb45f106ddebde081a8ac2c64278ebeb9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19324 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Add variant API for board_id and gpioFurquan Shaikh
Provide APIs for board_id() and gpio table functionality. Default weak implementations are provided from the baseboard. BUG=b:37375693 Change-Id: Ic3c946e6cb12b3c8ef3e83a1037ed0fc8cffbded Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19323 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Provide baseboard and variant conceptsFurquan Shaikh
In order to be able to share code across different poppy variants, provide the concept of baseboard and variants. New directory layout: variants/baseboard - code variants/baseboard/include/baseboard - headers variants/poppy - code variants/poppy/include/variant - headers New boards would then add themselves under their board name within "variants" directory. This is purely an organizational change. BUG=b:37375693 Change-Id: If6c1c5f479cfffe768abf27495d379744104e2dc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19322 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Prepare sharing directory for variantsFurquan Shaikh
Clean up Kconfig file in order to support variants for poppy. Add BOARD_GOOGLE_BASEBOARD_POPPY that can be set by various poppy variants to use the common baseboard configs. BUG=b:37375693 Change-Id: I399ecc8c3efb3af26e1fcf60fe2c75b24769fc0f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19321 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mb/google/poppy: Add camera supportV Sowmya
Add camera related support * Enable the SA Imaging Unit and CIO2 devices. * Enable TPS68470 PMIC and populate related ACPI objects. * Enable OV cameras and populate related ACPI objects. * Enable Dongwoon AF DAC and populate related ACPI objects. BUG=b:36580624 BRANCH=none TEST=Build and boot poppy. Dump and verify that ACPI tables have the required entries for all the camera devices. Change-Id: Ifbe878bb6b25fc976e935fee16c4d59fadd47fe2 Signed-off-by: Sowmya V <v.sowmya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18969 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-04-19mb/google/poppy: Add Image Processing Unit ASLSowmya
This patch includes ipu.asl file in the main DSDT definition to add ACPI entries for IMGU and CIO2 devices. BUG=b:36580624 BRANCH=none TEST=Build and boot poppy. Dump and verify that DSDT table has the entries for IMGU and CIO2 devices. Change-Id: Ib7485315cb9468da7c6aa090862657a265121493 Signed-off-by: Sowmya V <v.sowmya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19110 Tested-by: build bot (Jenkins) Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-18mainboard/google/poppy: Clean up gpio.h fileFurquan Shaikh
1. Update formatting of gpio table to fit everything within 80 column limit. 2. PEN_RESET gpio is non-existent. Get rid of it. BUG=b:37375693 Change-Id: I1bcc4168659f365547e5f7227df8659e4bc7f243 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19320 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-18mainboard/google/poppy: Enable deep S3 in DC modeFurquan Shaikh
Enable lower power state when running on battery. Deep S3 is not enabled when in AC mode to support standard "docked" config. BUG=b:36087058,b:36723679 TEST=Verified following behavior with USB mouse: 1. If AC is connected when entering S3, USB mouse is able to wake up. 2. If AC is not connected when entering S3, USB mouse does not wake up. 3. If AC is connected when entering S3 and removed after entering S3, USB mouse does not wake up. 4. If AC is not connected when entering S3 and attached after entering S3, USB mouse does not wake up. Change-Id: I141a8d4779de004e27fcd9357cef787a38a27b24 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19276 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-17mainboard/asus/kgpe-d16: Remove obsolete reference to TPM ASL fileTimothy Pearson
TPM ACPI entries are automatically generated, and the old static TPM ASL file is obsolete. Remove the reference to this obsolete static ASL file. Change-Id: I3cb2a8a3ac337d1de8a3c394d7a28155597239d0 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/19283 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-04-17mb/lenovo/t60: Remove PCI reset code from romstagePaul Menzel
Commit bf264e94 (i945:) adds a PCI reset to the romstage, and commit bc8613ec (Fix i945 based boards) fixes that to use the correct delay of 200 ms. This code was then copied over, when adding support for the Lenovo T60. The reset was related to the shipped crypto card on the Roda RK886EX and Kontron 986LCD-M, so is not needed on the Lenovo T60. So remove it, to reduce the boot time by 200 ms. The same change is done for the Lenovo X60 in commit 7676730b (mb/lenovo/x60: Remove PCI reset code from romstage). Change-Id: Ifff43f095a1236c9e9a9ef0687e8efe42e72c971 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/19298 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-15google/slippy: fix internal mic for falco/wolf variantsMatt DeVillier
The HDA verb for falco/wolf's internal mic was wrong, preventing the mic from working properly in Windows and macOS (the Linux driver overrides the verb table, so wasn't affected). Set the verb connector/jack bits properly, to no connector / no jack detect, in order to fix. Also, make (2) small non-functional fixes: On falco, NID 0x1A was being disabled twice (instead of 0x1A and 0x1B both being disabled - copy/paste error). On wolf, NID 0x19 was set to an internal analog mic, where it should have been disabled (again, copy/paste error). Both these errors were introduced when consolidating/upstreaming and were not present in the original Chromium sources. Test: boot Windows [8/8.1/10] and verify mic functional with Realtek drivers on both falco and wolf. Change-Id: I9c343dda4762f0b1f814318c155e22c59d2da8db Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19262 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-15mainboard/google/eve: Remove 'probed' setting from rt5663 codecDuncan Laurie
Remove the 'probed' setting from the Realtek 5663 headset codec I2C device. This was added when we had a hardware issue that was preventing I2C operation because the clock/data lines were swapped. With new and/or reworked hardware this is no longer a problem and we do not want the I2C layer in the kernel to talk to the device before the rt5663 driver. BUG=b:35585307 BRANCH=none TEST=Boot on Eve and verify rt5663 driver still loads properly. Change-Id: Ice38889e8f5d3fd1307056cab10fbe3f4e197749 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19304 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-14google/slippy: clean up NGI and move to libgfxinitMatt DeVillier
- remove old, buggy NGI code from falco/peppy variants - remove superfluous INTEL_DP/INTEL_DDI configs, since already selected by northbridge/haswell - always use libgfxinit when use native init config selected - enable NGI/libgfxinit for all slippy variants The reset of the old Haswell NGI code will be cleaned up in a subsequent patchset. Test: select MAINBOARD_DO_NATIVE_VGA_INIT, observe panel init using SeaBIOS and Tianocore payloads on peppy, wolf variants Change-Id: Id5727cad7f714ffa57e77e2a25505e3c28f55237 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18824 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-14southbridge/via/vt8237r: Get rid of #include early_smbus.cLubomir Rintel
Use linker instead of '#include *.c'. The smbus_fixup() was changed not to use a structure that's defined by a northbridge since multiple different northbridges can be used. Instead the caller now directly passed the memory slot details. Change-Id: Ia369ece6365accbc531736fc463c713bbc134807 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/19082 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-14mainboard/google/eve: Remove ACPI ALS deviceDuncan Laurie
Remove the ACPI ALS device from the EC configuration because this system has an ALS that is presented through the new EC sensor interface rather than the legacy ACPI interface. BUG=b:37179776 BRANCH=none TEST=Boot an Eve device and ensure that 'acpi-als' device is not present in /sys/bus/iio/devices. Change-Id: Ie18b8a661e4d16464784ca8a227586036e7631de Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19265 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-14mainboard/google/eve: Set UART0 to skip initialization in FSPDuncan Laurie
Set UART0 to "PchSerialIoSkipInit" so the pins for this device are not set back to native mode by FSP when configured as GPIO input by coreboot. Now that FSP is not touching the pins I also removed the workaround to reconfigure the pins after FSP. BUG=b:35647877 BRANCH=none TEST=Verify that GPP_C8-GPP_C11 are configured as GPIO input once the OS is booted and they are not set back to native function by FSP. Change-Id: Ifec4fa3e66ceeb660bad00c66bc7bd44bb457a01 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19264 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-14mainboard/google/eve: Enable internal pull-down on USB_C{0,1}_DP_HPDDuncan Laurie
These lines act as inputs to both EC and AP and when the corresponding TCPC mux is in low power mode the line is floating. Add an internal pull-down to each GPIO to prevent it from floating in this state. BUG=b:35775012 BRANCH=none TEST=Verify that the kernel does not see a device present on DP when the TCPC mux is in low power mode. Change-Id: Ie229f84871e9994467c0ab660cc7e271a51d9cbb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19263 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-13mainboard/sapphire/pureplatinumh61: Enable EuP and PMENicola Corna
With EuP and PME enabled the USB power turns off during S5. Change-Id: I8b9fd7bb308f544401f90f8aa5ffaec61251b2b3 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/19073 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-04-13mainboard/google/reef: Configure sdcard card detect (CD) pin GPIO_177Venkateswarlu Vinjamuri
This configures GPIO_177 as native function. This enables OS to boot from sdcard. BUG=b:35648535 TEST=Check OS boot from sdcard. Change-Id: I73901d4a1b39752cbc452f3286d494587dac95d4 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/18948 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
2017-04-13mainboard/google/snappy: Increase weida touchscreen reset delayWisley Chen
Weida touchscreen controller needs 130 ms delay after reset BUG=b:35586513 BRANCH=reef TEST=Verified that touchscreen works on power-on and suspend/resume on snappy. Change-Id: I8418e742a69a2d6395baa2799a4da42a9bb5b312 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/19245 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-13google/eve: Disable Deep S3 in AC modeDuncan Laurie
In order to support a standard "docked" config disable Deep S3 when connected to AC power. This allows USB devices to wake the device from suspend if it is externally powered, but still retains the lower power state when running on battery. BUG=b:36723679 BRANCH=none TEST=manual testing on Eve for USB wake behavior: 1) when suspended on battery USB keyboard does not wake 2) when suspended while connected to AC a USB keyboard does wake 3) if suspended with AC, and then AC is removed, system does not wake with USB keyboard 4) if suspended without AC, and then AC is added, system does not wake with USB keyboard (it cannot get enabled without waking and re-suspending) Change-Id: I670e39d42cdb5b80612206da899be82ef3b2cbf2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19240 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-13google/eve: Enable WiFi SAR featureDuncan Laurie
Enable the Intel WiFi SAR feature for Eve, which will be used to provide wifi power tables based on values read from VPD. This is enabled based on CONFIG_CHROMEOS because it relies on the presence of VPD code from vendorcode/google/chromeos. BUG=b:36727652 BRANCH=none TEST=test on Eve by setting "wifi_sar" in VPD and ensuring that the ACPI WIFI device gets the expected "WRDS" and "EWRD" tables with the values that were set in VPD. Change-Id: I11c129baca891221177575108ac09ba1707b516e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19241 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-13soc/intel/skylake: Split AC/DC settings for Deep Sx configDuncan Laurie
Currently when enabling Deep S3 or Deep S5 it unconditionally gets enabled in both DC and AC states. However since using Deep S3 disables some expected features like wake-on-USB it is not always desired to enable the same state in both modes. To address this split the setting and add a separate config for Deep Sx in AC and DC states. All motherboards that set this config were updated, but there is no actual change in behavior in this commit. BUG=b:36723679 BRANCH=none TEST=This commit has no runtime visible changes, I verified on Eve that the Deep SX config registers are unchanged, and it compiles for all affected boards. Change-Id: I590f145847785b5a7687f235304e988888fcea8a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19239 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 03:38:30 +0000