summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2023-02-04Revert "UPSTREAM: mb/google/rex: Enable SaGv"Subrata Banik
Enabling `SaGv` along with FSP v2473 is causing blank display issue. Mostly likely we shouldn't enable SaGv yet on Intel MeteorLake. BUG=b:267446159 TEST=Able to see ChromeOS UI in consecutive boot. This reverts commit cbca81c5946384843197c08401c4266f45fef4a2. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ifbcc36515f7550c183c40e5af94684f5c3e39a7a Reviewed-on: https://review.coreboot.org/c/coreboot/+/72774 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-04mb/*: Replace SNB PCI devices with references from chipset.cbArthur Heymans
Removing default on/off from mainboard devicetrees is left as a follow-up. Change-Id: I74c34a97ea4340fb11a0db422a48e1418221627e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69502 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-02-04mb/google/skyrim: Add EC_HOST_EVENT_PANIC to SCI maskRob Barnes
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the Kernel when an EC panic occurs. If system safe mode is also enabled on the EC, the kernel will have a short period to extract and save info about the EC panic. BUG=b:266696987 BRANCH=None TEST=Observe kernel ec panic handler run when ec panics Change-Id: I9b50ab3c0bcef192ef89f173852cda222f1533c7 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-02-04mb/starlabs/starbook/adl: Enable HPD GPIOSean Rhodes
Enable the HPD GPIO so that the USB-C port can be used for DisplayPort. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If93d08f64cf7b09bb47622bdc7f22280b8a48174 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72431 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-04mb/intel/mtlrvp: Enable CNVi BT Core and WifiHarsha B R
This patch enables CNVi_BT Core and Wifi for mtlrvp based on mtlrvp schematics. 1. Enable CNVi BT Core in device tree 2. Enable CNVi Wifi (pci 14.3) device in device tree BUG=b:224325352 BRANCH=None TEST=Able to observe corresponding UPD configuration with FSP dump and able to boot mtlrvp (LP5/DDR5) to ChromeOS. CNVi Mode = 1 Wi-Fi Core = 1 BT Core = 1 BT Audio Offload = 0 BT Interface = 1 Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I22575bf31b540f9dc1149a2766268285001b72f4 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-03soc/intel/apl: Move cpu cluster to chipset.cbArthur Heymans
Change-Id: I7eaf625e5acfcefdae7c81e186de36b42c06ee67 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2023-02-03mb/google/brya0,skolas4es,skolas: disable Tccold HandshakeSelma Bensaid
The patch disables Tccold Handshake to prevent possible display flicker issue for skolas board. Please refer to Intel doc#723158 for more information. BUG=b:221461379 BRANCH=firmware-brya-14505.B TEST=Boot to OS on Skolas, verify upd setting. Change-Id: Ic184a61c27abd729667cd181d8f9954f58b67856 Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68636 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-03mb/google/nissa/var/craask: Add DPTF settings for 15W CPURen Kuo
Add ADL-N 15W CPU thermal settings. BUG=b:265101768 TEST=emerge-nissa coreboot Change-Id: I325704d6fc4ddaf56eaddd6a69bc619588df99cd Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71860 Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-03mb/google/rex: update touchscreen report EN pin settingIvy Jian
Removed workaround since the latest schematics fixed. Power Sequencing of ELAN6918 (in ACPI) after this patch `POWER enabled -> RESET deasserted -> Report EN enabled` BUG=b:247029304 TEST=Verified ELAN touch panel is working as expected after booting Google/rex device to ChromeOS. Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: I19629262776f7e0cccbdebb2285890d177a8a8a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72725 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-02mb/google/dedede/var/dibbi: Update devicetree and GPIO tableLiam Flaherty
Create overridetree and GPIO config based on latest schematic: 1. Update PCIe ports 2. Update USB ports 3. Remove unused I2Cs 4. Remove unused peripherals (SD card, eDP, speakers) 5. Add LAN 6. Thermal policy for updated temp sensors BUG=b:260934185, b:260934719 BRANCH=dedede TEST=build Change-Id: I4789be2eee1d01288031bc1e8ee5c9d6df71f9fe Signed-off-by: Liam Flaherty <liamflaherty@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71882 Reviewed-by: Adam Mills <adamjmills@google.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-02drv/i2c/ptn3460: Use PTN_EDID_LEN instead of constantJan Samek
Contents of the EDID are passed by a reference to an array of length 0x80, for which the macro 'PTN_EDID_LEN' has already been around. This patch makes use of this macro within the driver and mainboard implementation utilizing it. BUG=none TEST=A successful build of mc_apl{1,4,5,7} and mc_ehl3 mainboards. Change-Id: If7d254aaf45d717133bb426bd08f8f9fe5c05962 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2023-02-02mb/google/brya: Skip locking for GPP_F14 GPIOMaulik Vaghela
This is regarding issues observed on multiple Brya and Nissa variant such as Skolas and Nivviks. Issue is that once coreboot sets GPE_EN bit for the GPIO pin and locks it, kernel is not able to change the control bit. Hence kernel is not able to control the IRQ on the pin when required. This issue was root caused to the patch which was setting GPE_EN bits for the GPIOs before locking. Ref: commit 38b8bf02d820 ("intelblocks: Add function to program GPE_EN before GPIO locking") This patch skips the locking for GPP_F14 to allow kernel to configure it later during reboot or shutdown as required. BUG=b:254064671 BRANCH=None TEST=Shutdown works on Skolas and Brya board with the patch. Signed-off-by: Maulik Vaghela <maulikvaghela@google.com> Change-Id: I7e4a6ac4668028bcd5fa400b9aa8eccf36a79620 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72648 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-02mb/google/skolas: Skip locking for GPP_F14 GPIOMaulik Vaghela
There is an existing issue for skolas boards where board wakes up from shutdown immediately due to touchpad wake signal. This issue was root caused to the patch which was setting GPE_EN bits for the GPIOs before locking. Ref: commit 38b8bf02d820 ("intelblocks: Add function to program GPE_EN before GPIO locking") Later issue was found to be with GPP_F14 configuration for skolas boards. While shutting down, kernel is not able to disable IRQ for touchpad due to GPE_EN register getting locked and it is preventing shutdown of the board. This patch skips the locking for GPP_F14 to allow kernel to configure it later. BUG=b:254064671 BRANCH=None TEST=Shutdown works on Skolas board with the patch. Nissa Bug: 234097956 Signed-off-by: Maulik Vaghela <maulikvaghela@google.com> Change-Id: I09cf1af1f5ab11b06073755374ee8a306984d557 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72426 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-01mb/google/brya/var/omnigul: Add memory configAmanda Huang
Configure the rcomp, dqs and dq tables based on the schematic. BUG=b:264340545 BRANCH=firmware-brya-14505.B TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I82ca8aa9c3535983d5c506c15dbc69e7be926fa0 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Marx Wang <marx.wang@intel.com>
2023-02-01mb/google/brya/var/omnigul: Select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFSJamie Chen
This patch selects USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS for Google/Omnigul variant which intends to achieve a unified AP firmware image across UFS and non-UFS skus. BUG=b:263846075 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I90ae116ccccde48792aeafaa683c7420a95c9886 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72509 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-01mb/google/geralt: Add USB3 HUB reset funtion to bootblockBo-Chen Chen
After powering on the device, we need to pull USB3_HUB_RST_L up to enable USB3 Hub. TEST=boot kernel from USB ok BUG=b:264841530 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Change-Id: I8df35efb78e90a5b3314840fe2eae81d6e501242 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72594 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-01mb/prodrive/atlas/data.vbt: Fix VBT lane countMaximilian Brune
Currently there is a problem, where two Displayports are not working. To be precise: TCP0 and TCP1 (Type-C Port 0/1) are not working. Setting the lane count of the TCP0 and TCP1 to x1 works fine. Setting the lane count of the TCP0 and TCP1 to x2 does not work. Setting the lane count of the TCP0 and TCP1 to x4 does not work. The reason for that is currently unknown. This change sets the lane count of the TCP0 and TCP1 Port to x1 length in the VBT binary. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I182b528275152bf5adcb01a56816afd65674aed3 Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72610 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-01mb/intel/mtlrvp: Modify the print messageHarsha B R
This patch updates the print message to start with uppercase, 'board' to 'Board'. BUG=b:224325352 BRANCH=None TEST=Able to observe proper print message when invalid board id is configured. Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: Ie82df940cbd1eba9c5d485b48648c2bc8f234aae Reviewed-on: https://review.coreboot.org/c/coreboot/+/72638 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Usha P <usha.p@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-31mb/google/skyrim/var/winterhold: Update DPTC settings for SMTEricKY Cheng
Follow thermal team's request on b/248086651 comment#27. Update the thermal table setting for each mode and the conditions of temperature switching. BUG=b:248086651 TEST=emerge-skyrim coreboot Change-Id: Ida10d9b10c33dea11440879afda07c04c1eccb9f Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2023-01-31mb/amd: Include <gpio.h> instead of <soc/gpio.h>Elyes Haouas
<gpio.h> chain-include <soc/gpio.h>. Change-Id: I48191064fcee53ca843a537aa36bdbbd57736bf2 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-30src/mainboard: Remove unnecessary space after castsElyes Haouas
Change-Id: Id8e1a52279e6a606441eefe30e24bcd44e006aad Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69815 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-01-30mb/siemens/mc_ehl3/gpio.c: Disable PSE GBE0 GPIOJan Samek
Since the PSE GBE0 MAC has been disabled on this board in commit 343644006f89 ("mb/siemens/mc_ehl3/devicetree.cb: Remove TSN GbE 0"), therefore disable the corresponding GPIOs as well. BUG=none TEST=Test link detection and IP assignment on the remaining ports (PSE GBE1 and PCH GBE0) of mc_ehl3. Change-Id: Ifa055f58894688471d68b9b93fcb994fdcb2a568 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72449 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
The parallel mp code picks up lapics at runtime, so remove it from all devicetrees that use this codebase. Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-01-30mb/intel/mtlrvp: Add romstage and configure LP5 memory partsAshish Kumar Mishra
This patch adds initial romstage code and spd data for LP5 memory parts for MTL-RVP. This also configures memory based on the board id. Memory - x32 LPDDR5 Vendor/Model - Micron/MT62F2G32D8DR-031 WT:B Board ID - 0b0000 - Empty spd hex file 0b0001 - DDR5 (Empty spd hex file) 0b0010 - LPDDR5 (MT62F2G32D8DR-031 WT:B) BUG=b:224325352 TEST=Able to boot intel/mtlrvp (LP5 SKU) to ChromeOS Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Change-Id: I15b352eb246aed23da273e56490c7094eae9d176 Signed-off-by: Harsha B R <harsha.b.r@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-30mb/google/brya: Select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFSSubrata Banik
This patch selects USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS for Google/Marasov variant which intends to achieve a unified AP firmware image across UFS and non-UFS skus. Note: Enabling this config would introduce an additional warm reset during the cold-reset scenarios due to the function disabling of the UFS controller as results we are expecting ~300ms higher boot time (which might not be user visible because `cbmem -t` can't include impacted boot time due to in-between resets). BUG=b:264838335 TEST=Able to enter S0ix on Marasov NVMe sku after disabling UFS during boot path. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie8b8814cdb5e0d97a382cebfe82868ada5762341 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-01-27mb/starlabs/starbook/adl: Fix the disable wireless CMOS optionSean Rhodes
The current CMOS option causes Linux to not boot, as the GRUB EFI loader will report an incorrect parameter. Update the CMOS option so that the corresponding UPD is changed when the wireless is set to disable, so that the root port for the wireless is also disabled. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I607d700319d6a58618ec95b3440e695c82dff196 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71896 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-27mb/starlabs/starbook/adl: Make Type-C USB a standard portSean Rhodes
Change the Type-C USB 2.0 interface to a standard port, as the Type-C macro will not work in Linux (dmesg says the cable is faulty), This makes the port work reliably in Linux, tested with: * Manjaro 21 * Ubuntu 22.04 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I6dbf31b6e4603685297e9e5203b0db6ac1b9e24a Reviewed-on: https://review.coreboot.org/c/coreboot/+/72387 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-27drivers/i2c/ptn3460: Use cb_err in mb_adjust_cfgJan Samek
Return generic coreboot error codes from the mb_adjust_cfg callback used in mainboards instead of '-1' constant and a driver-specific success-indicating define. BUG=none TEST=Boards siemens/mc_apl{1,4,5,7} and siemens/mc_ehl3 build correctly. Change-Id: I5e0d4e67703db518ed239a845f43047f569b94ec Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-27mb/siemens/mc_apl1/var/mc_apl5: Enable early POSTJan Samek
Enable early POST code display on this variant using the common mc_apl1 baseboard functionality. BUG=none TEST=Boot on mc_apl5 and observe that POST codes are displayed before DRAM training. Change-Id: I390e0ab09ca830637e7a991db77e994d6c358e75 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72386 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-26src/mb/prodrive/atlas: Add GPIOs for configurationMaximilian Brune
CLKREQ Pins are intentionally not configured, because there seems to be a current Issue with FSP, that causes pci devices to not work if CLKREQ Pins are configured by coreboot. The msi/ms7d25 mainboard seems to have a similar issue and the cause is also documented in it's gpio.c file. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: Iba35076af194de0e85de60ebc93d62fda24e9c24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-01-26mb/starlabs/starbook/Kconfig: Move MAINBOARD_HAS_TPM2 to STARBOOK_SERIESElyes Haouas
Change-Id: I5f91ae1b5904405edd797b57fbeb46609301295c Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72434 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-25mainboard: Drop invalid `hyper_threading` optionAngel Pons
Drop the `hyper_threading` CMOS option from most boards, as it's most likely not working properly and causing problems. The main reasons to remove the option are: * The used enum is backwards (0 ---> Enable, 1 ---> Disable) * Platform/SoC code does not honor the `hyper_threading` option Also, remove the now-unused enum used by the `hyper_threading` option. Change-Id: Ia8980a951f4751bc2e1a5d0e88835f578259b256 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69523 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2023-01-25mb/starlabs/starbook/adl: Enable pin widget 0x18Sean Rhodes
Enable pin 0x18 which is used for the 3.5mm combo jack microphone detection. Also, disable 0x17 as it is not used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I05856627c073acaff49ea1ddc048a49a74b6268f Reviewed-on: https://review.coreboot.org/c/coreboot/+/71718 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-25mb/starlabs/starbook/adl: Change HDA verb hex values to lower caseSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I6a5c54ac46840fc1e03eb15b9ae2ddc34172ec08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72011 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-25mb/prodrive/atlas: Enable audio outputLean Sheng Tan
Before, the Intel HDA PCIe device was showing up in the lspci tool, but Audio wasn't working. This patch enables the corresponding FSP-M settings to make it work. Tested on Prodrive Atlas with Themis carrier board on Windows 10 and Linux 6.1.0-rc3. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I144618c453c1e6a3e759afc7532a4ac4a71814c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-01-25mb/prodrive/atlas: Disable SaGv by defaultLean Sheng Tan
Customer needs SaGv to be disabled by default. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I8454c267dcc12d2ef7de7bd23296a17294f058a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-01-25mb/google/skyrim/baseboard/devicetree: enable mp2 deviceFelix Held
The mp2 PCI device is still present when no mp2 firmware is loaded. When this device isn't explicitly enabled in the mainboard's devicetree, the chipset devicetree default of the device being disabled is used. This results in coreboot's resource allocator not allocating resources to the device and since the bridge doesn't have enough MMIO space reserved, the Linux kernel can't assign resources to it. To fix this problem, enable the mp2 device in the mainboard's devicetree so that it gets its resources assigned by coreboot. An equivalent change was verified on Chausie. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1076ccacc6f51bf195b8280a6df5ad1849771519 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72196 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-25mb/amd/chausie/devicetree: enable mp2 deviceFelix Held
The mp2 PCI device is still present when no mp2 firmware is loaded. When this device isn't explicitly enabled in the mainboard's devicetree, the chipset devicetree default of the device being disabled is used. This results in coreboot's resource allocator not allocating resources to the device and since the bridge doesn't have enough MMIO space reserved, the Linux kernel can't assign resources to it. To fix this problem, enable the mp2 device in the mainboard's devicetree so that it gets its resources assigned by coreboot. TEST=Fixes the resource allocation for the mp2 PCI device. dmesg output before the patch: [ 0.210616] pci 0000:04:00.7: [1022:164a] type 00 class 0x118000 [ 0.210631] pci 0000:04:00.7: reg 0x18: [mem 0x00000000-0x000fffff] [ 0.210641] pci 0000:04:00.7: reg 0x24: [mem 0x00000000-0x00001fff] [ 0.210649] pci 0000:04:00.7: enabling Extended Tags [ 0.240570] pci 0000:04:00.7: BAR 2: no space for [mem size 0x00100000] [ 0.240572] pci 0000:04:00.7: BAR 2: failed to assign [mem size 0x00100000] [ 0.240574] pci 0000:04:00.7: BAR 5: assigned [mem 0xd05c6000-0xd05c7fff] dmesg output after the patch: [ 0.210483] pci 0000:04:00.7: [1022:164a] type 00 class 0x118000 [ 0.210501] pci 0000:04:00.7: reg 0x18: [mem 0xd0500000-0xd05fffff] [ 0.210515] pci 0000:04:00.7: reg 0x24: [mem 0xd06c6000-0xd06c7fff] [ 0.210524] pci 0000:04:00.7: enabling Extended Tags Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I680ef9798f2f0e7e0646f0fd30bef58398b7bf19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72197 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-24mb/google/rex: Enable SaGvSubrata Banik
This patch overrides `SaGv` FSP-M UPD to enable SaGv feature to be able to train memory (DIMM) at different frequencies. On all latest Intel based platforms SaGv is expected to be enabled to support dynamic switching of memory operating frequency. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I7cf52b966c1355c1f2bd4ae7c256fa4252a90666 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-01-22mb/amd/(birman|mayan): Update chromeos.fmd filesMartin Roth
Because the EFS is now fixed at 0xff020000, the ChromeOS RO region needs to be moved to the bottom of the ROM area to cover that space. The RO Region 6MiB, but you can't actually set 6MiB as RO - it's either 4 or 8MiB, so that's adjusted. To leave some room for the RW_LEGACY region, the two RW regions are adjusted to 3MiB each, which should be plenty. The GBB region had to be moved from the front of the WP_RO region to the end to avoid conflicting with the EFS, which needs to be inside the coreboot cbfs area. Also get rid of AMD_FWM_POSITION_INDEX. The FWM position is no longer needed. Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I683155ec0f4e6a62d862b9e2fa76af45f4cd5493 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-22mb/google/brya: Add lp5x memory parts for CrotaTerry Chen
Update the mem_parts_used.txt, generate Makefile.inc and dram_id.generated.txt for this part. DRAM Part Name ID to assign MT62F1G32D2DS-026 WT:B 4 (0100) K3KL8L80CM-MGCT 4 (0100) H58G56BK7BX068 4 (0100) BUG=b:259467147 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I204e871129a1b15d7c373d579e10a7b9ab6deabe Reviewed-on: https://review.coreboot.org/c/coreboot/+/71906 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-22Revert "mb/google/brya: Add EC mux device to brya0"Anil Kumar
This reverts commit 197d550d069f918698fa7cd8dda73e09fbfda30c. Reason for revert: breaks TBT and TypeC display on Brya0 Bug=265375098 Branch=firmware-brya-14505.B Test=Build and boot Skolas board with Brya0 image. Test TBT and TypeC display functionality. Change-Id: Ia0283b023949476e90edff7151d605fa36331bfd Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72081 Reviewed-by: Prashant Malani <pmalani@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-22mb/siemens/mc_apl1/var/mc_apl6: Enable early POSTJan Samek
Enable early POST code display on this variant using the common mc_apl1 baseboard functionality. BUG=none TEST=Boot on mc_apl6 and observe that POST codes are displayed before DRAM training. Change-Id: I2a52c241c383f8ebcf05052e9bc0ba13e63e3728 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-22mb/siemens/mc_apl1: Move POST logic to mainboard levelJan Samek
Move logic previously used only in the mc_apl2 variant to the mainboard level so that other variants can also make use of it without code duplication. This functionality on the mc_apl6 variant will be enabled in a follow-up patch. BUG=none TEST=Boot on siemens/mc_apl2 and observe that the POST codes are displayed before DRAM training. Change-Id: I762e328ad06c047d911ce1fc40f12a66cbd14e11 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-20mb/google/brya/acpi: Update NVPCF_FUNC_UPDATE_DYNAMIC_PARAMSTarun Tuli
1) Update location of TGP (MAGA) to Params2[15:0] 2) Add TPPA (value of 25W) Package: ... Case (0x02) { Local0 = Buffer (0x31) { 0x22, 0x05, 0x10, 0x1C, 0x01 } CreateWordField (Local0, 0x1D, MAGA) CreateWordField (Local0, 0x19, TPPA) CreateDWordField (Local0, 0x15, CEO0) MAGA = 0x50 TPPA = 0xC8 CEO0 = 0x0200 Return (Local0) } ... BUG=b:214581372 TEST=build and verify DSDT on device Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I69b80f4af2ecef6cf91034fc15fb6e8715eeca4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/69639 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-20mb/google/skyrim/var/frostflow: Update I2C setting for touchpadRex Chou
Update setting for touchpad I2C frequency and hold time to meet touchpad i2c SPEC. - Frequency: 380 ~ 400 kHz - hold time : 0.3 ~ 0.9 us BUG=b:261159229 TEST=On frostflow, touchpad i2c spec from EE measure Frequencies: I2C0 (Touchpad): 393.7 kHz Hold time = 0.604 us Change-Id: Iecf4960a12aa56ac307fb9022e47c4e94a2551c1 Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72114 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-20mb/siemens: Unify and clean lcd_panel.c coding styleJan Samek
With the addition of the mc_ehl3 board variant, a few points about commenting the code arose either from the review or during the implementation itself. This patch unifies structure of these files, which have a similar structure across more Siemens boards utilizing the PTN3460 eDP-to-LVDS bridge. BUG=none TEST=Check that images for the affected boards can be built. Change-Id: I59820362e1f87e296c5548b9c3cecba4d2710fe7 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72068 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-20mb/siemens/mc_ehl3: Add PTN3460 eDP-to-LVDS bridgeJan Samek
This board contains in addition to its base variant, mc_ehl2, an LCD panel driven through the PTN3460 eDP-to-LVDS bridge. This patch enables the PTN3460 support by adding the device to devicetree.cb and board-specific configuration parameters in lcd_panel.c, based upon a similar implementation in siemens/mc_apl7. BUG=none TEST=Boot with the LCD panel attached and observe whether the picture is stable and free of artifacts coming from wrong resolution, timing etc. Change-Id: Ib8a1a6f47053406e42554c2dd33684165d54be08 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-20mb/google/brya/var/gaelin: Add touch panel module settingMike Shih
1. Enable multiple GPIOs to support the touch panel. 2. Add I2C setting for touch panel. BUG=b:260818082, b:264812909 BRANCH=firmware-brya-14505.B TEST=emerge-brask coreboot Change-Id: I2b805d1960f8b4e3e27f1af02f9c4d31f973288f Signed-off-by: Mike Shih <mikeshih@msi.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-01-20mb/intel/adlrvp/spd/Makefile.inc: Remove spaces before tabsElyes Haouas
Change-Id: I7bd29bab2c77da2ffe86167d54e87c9941355ea7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-01-19mb/siemens/mc_ehl3: Use device/mmio.h instead of device/pci_ops.hJan Samek
The {read,write}{16,32}() functions used in this file come from the mmio.h header, so include it directly. BUG=none TEST=Read out the SD card controller (device 1a.1) PCI registers in Linux and check whether the values reflect the ones defined in this file. Change-Id: Iff7b55ef2bf98371b7d7d9114ccf3ebed64772a2 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72009 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-19intel/meteorlake: remove skip_mbp_hob SOC chip configKapil Porwal
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to control the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP. This new option is hooked with `SkipMbpHob` UPD and is always disabled for ChromeOS platforms. This made skip_mbp_hob SOC chip config variable redundant which is also removed as part of this change. BUG=none TEST=Build and boot to Google/Rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Iaba1ea29a92a63d2b287e1ccdea1a81ec07b9971 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-19mb/google/skyrim/var/frostflow: set dxio_tx_vboost_enableFrank Wu
Turn on the dxio_tx_vboost_enable for frostflow in coreboot. It needs to confirm the PCIe Signal Integrity after enabled. BUG=b:259007881, b:248221908 BRANCH=none TEST=emerge-skyrim coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Iaac331737c83ac7a4a1261c32151359e126a009e Reviewed-on: https://review.coreboot.org/c/coreboot/+/71926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-19tree: Drop Intel Ice Lake supportFelix Singer
Intel Ice Lake is unmaintained and the only user of this platform ever was the Intel CRB (Customer Reference Board). As it looks like, it was never ready for production as only engineering sample CPUIDs are supported. As announced in the 4.19 release notes, remove support for Intel Icelake code and move any maintenance on the 4.19 branch. This affects the following components and their related code: * Intel Ice Lake SoC * Intel Ice Lake CRB mainboard * Documentation Change-Id: Ia796d4dc217bbcc3bbd9522809ccff5a46938094 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72008 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-19mb/google/skyrim/var/markarth: set dxio_tx_vboost_enableFrank Wu
Turn on the dxio_tx_vboost_enable for markarth in coreboot. It needs to confirm the PCIe Signal Integrity after enabled. BUG=b:263534907, b:263216451 BRANCH=none TEST=emerge-skyrim coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I0798c1d9788e1911c2643bf387722b072aa79045 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Chao Gui <chaogui@google.com>
2023-01-18mb/siemens/mc_ehl: Remove '_' from mc_ehl3 part numberJan Samek
Change MAINBOARD_PART_NUMBER Kconfig value for mc_ehl3 from "MC_EHL3" to "MC EHL3". Change-Id: Ie548607c5fb62faaed4921af714bc9b912e558a8 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71775 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-18mb/google/brya/var/marasov: Remove wlan RTD3 supportFrank Chu
Wlan power enable pin is changed from EN_PP3300_WLAN to SLP_SUS_L. Remove unused RTD3 driver. BUG=b:263448873 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I22448a8cb28ddadb93b114c096e364980feab6fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/71693 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-18mb/google/skyrim: Add custom amdfw.cfg file to remove fwTPMMartin Roth
Skyrim doesn't use the firmware TPM, so remove the binary from the image. Note that because this was not used, removing it doesn't change the boot time. BUG=None TEST=Boot Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ia627b128c3346a2556c5306de7506519d1f2d70c Reviewed-on: https://review.coreboot.org/c/coreboot/+/72002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-01-17mb/google/skyrim: Set winterhold SPI fast read speed to 100MHzMartin Roth
Winterhold runs with the SPI fast read speed set to 100MHz. This decreases boot time by roughly 100ms. BUG=None TEST=Examine boot times. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I879e17fb0212910c7f90ba0e78ee16bea8b7cffa Reviewed-on: https://review.coreboot.org/c/coreboot/+/71888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-01-17mb/google/marasov: Skip MBP HOB creation to save boot timeSubrata Banik
This change skips the MBP HOB creation since coreboot doesn't use it and also helps to reduce the boot time by ~10msec. Boot time data: Before: * 955:returning from FspSiliconInit 897,278 (33,603) After: * 955:returning from FspSiliconInit 864,543 (21,273) Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia97cca560869fcfd55e65c2e1719cceec6f3ab7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/71873 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-17treewide: Fix old-style declarationsElyes Haouas
Replace old style declaration "const static" with "static const". This to enable "Wold-style-declaration" command option. Change-Id: I757632befed1854f422daaf4dfea58281b16e2f5 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-17mb/starlabs/starbook/adl: Fix alignmentSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4a3f871f2418438ef8e780a39935dfa2f86d8dbb Reviewed-on: https://review.coreboot.org/c/coreboot/+/71895 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-16soc/amd/picasso/include/acpi: introduce and use ACPI_SCI_IRQ definitionFelix Held
The newer AMD SoCs define ACPI_SCI_IRQ in the SoC's acpi.h header file and use this definition in the mainboard code, so port this back to Picasso. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib569747aa388d7953e79de747905fb52c2a05e74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-01-16Revert "mb/starlabs/starbook/adl: Enable the PchHdaAudioLinkHdaEnable UPD"Martin L Roth
This reverts commit 0e945a3426782e3c054a920ff8be3cd865f697ba. Reason for revert: Breaks build. Need to be merged after https://review.coreboot.org/c/coreboot/+/71715 which adds the register that this patch enables Signed-off-by: Martin L Roth <gaumless@gmail.com> Change-Id: I0ac3fb1a44e23e19c9711287f3a6a8402a6ffd79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71283 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-01-16mb/starlabs/starbook/adl: Enable the PchHdaAudioLinkHdaEnable UPDSean Rhodes
Enable the PchHdaAudioLinkHdaEnable UPD so that the sound works. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Id53c9a6495d584c374e89b76d1fd4258654b6f95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2023-01-15mb/bostentech: Update name in KconfigMartin Roth
The Bostentech mainboard appears out of order - this can be fixed either by renaming the mainboard to start with S, or by the simpler method used here by putting the mainboard directory name as the main name, then noting that the full name is "Shenzhen Bostrontium Teng Technology". Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I31b4c663b68cdcde2d175f080f011f2998e56074 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-15mb/google/skyrim/var/winterhold: Update USB port A0 settingEricKY Cheng
Update USB port Type-A Port A0 setting. BUG=b:261650602 TEST=emerge-skyrim coreboot. Ensure that USB-A port is enumerated correctly in the output of lusub command. Change-Id: I9563f7b141c34b613cf896f1ce92178617a62c93 Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71854 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-01-15mb/google/brya/var/marasov: Update Aux settingsFrank Chu
Follow hardware design to correct aux setting on USB-C ports to fix DP monitor can not output data through type-C port 0 USB-C port 0 did not have retimer. USB-C port 1 have retimer. USB-C port 0 AUX_DC_P connect to GPP_E22. USB-C port 0 AUX_DC_N connect to GPP_E23. BUG=b:263212450 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage DP monitor display normally Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I3af7522f7b6477edcd88004ce1d5f86aeebe3393 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71222 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-15mb/google/skyrim/var/winterhold: Update I2C bus0 settingsDtrain Hsu
Update settings for touchpad I2C frequency and data hold time. I2C frequency and data hold time need to meet touchpad spec. - I2C frequency: 380kHz - 400kHz - Data hold time: 0.3us - 0.9us BUG=b:262320419 TEST=On winterhold, touchpad i2c measurement from vendor, Frequencies: 395 kHz, Data hold time: 0.66 us Change-Id: I40fa6f9e88656d4ec02a4120f75a2a9413b5abaa Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-15drivers/i2c/generic: Drop 'disable_gpio_export_in_crs' flagMatt DeVillier
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the OS driver and ACPI thinking they own the GPIO. This can cause timing problems because it's not clear which system should be controlling the GPIO. Previously, we flagged as an error any device which set the 'has_power_resource' flag but did not set 'disable_gpio_export_in_crs.' There's no reason to require explicit disablement however, so drop the superfluous 'disable' flag, and change the _CRS generation to check if the GPIOs will be exported via the 'has_power_resource' flag instead. BUG=b:265055477 TEST=build/boot skyrim, dump SSDT and verify touchscreen GPIOs only listed under PRx, not under _CRS. Change-Id: I837ae6c6fe4b8e1c4e10686406cba06bdb7759d2 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-13mb/google/skyrim: remove morthal variantMartin Roth
Morthal has been overcome by events. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ice46f4c7400772dbf51eb9d20b61af277daa8513 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-13mb/lenovo/t520: Disable SATA2 and Thermal on W520Angel Pons
If a discoverable device (e.g. a PCI device) does not appear in the devicetree (typically because it is removable), coreboot enables it by default. Disable the SATA2 (device for SATA ports 4 and 5, which is not used in AHCI mode) and Thermal devices on W520 as well. Both devices were only disabled on the T520. Tested, this change fixes a long boot time when using MrChromebox's edk2 payload on the W520, likely related to the following errors: AHCI: Error interrupt reported PxIS: 40000001 Non data transfer failed at retry 0 AHCI: Error interrupt reported PxIS: 40000001 Non data transfer failed at retry 1 AHCI: Error interrupt reported PxIS: 40000001 Non data transfer failed at retry 2 AHCI: Error interrupt reported PxIS: 40000001 Non data transfer failed at retry 3 AHCI: Error interrupt reported PxIS: 40000001 Non data transfer failed at retry 4 Change-Id: I0b0483aae05fa84d97987a93db634b740f830e18 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71857 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-13mb/lenovo/t520: Also disable PCI bridge on W520Angel Pons
As per Kendo3-WS schematics, the conventional PCI bridge is not used. Change-Id: Ic3aa11cc3a3028c31b06ad8f74875db8c5626a89 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71856 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-13mainboard: Remove duplicated <soc/gpio.h>Elyes Haouas
<gpio.h> chain-include <soc/gpio.h>. Change-Id: Ia57d5cd33c70b6a755babd4db56c64c0e3666f9f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-13mb/system76/adl-p: Enable AER on CPU PCIe RPTim Crawford
Tested with the following drives: - Crucial P5 Plus (CT500P5PSSD8) - Kingston KC3000 (SKC3000S/512G) - Sabrent Rocket NVMe 4.0 (SB-ROCKET-NVMEe4-500) - Samsung 970 EVO (MZ-V7E250) - Samsung 970 EVO Plus (MZ-V7S250) - Samsung 980 PRO (MZ-V8P2T0) - WD Black SN850X (WDS100T2XD0E) - WD Blue SN580 (WDS500G2B0C) - WD Green SN350 (WDS240G2G0C) Test: - Drive is functional and has no unrecoverable errors on boot - Drive is functional and has no unrecoverable errors after S0ix Change-Id: I51492c97c48f760d4aa9e4a2b2e57b0f1a06d090 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-01-13mb/system76/adl-p: Add CPU PCIe RP RTD3 configsTim Crawford
Tested with the following drives: - Crucial P5 Plus (CT500P5PSSD8) - Kingston KC3000 (SKC3000S/512G) - Sabrent Rocket NVMe 4.0 (SB-ROCKET-NVMEe4-500) - Samsung 970 EVO (MZ-V7E250) - Samsung 970 EVO Plus (MZ-V7S250) - Samsung 980 PRO (MZ-V8P2T0) - WD Black SN850X (WDS100T2XD0E) - WD Blue SN580 (WDS500G2B0C) - WD Green SN350 (WDS240G2G0C) Test: - System still asserts `SLP_S0#` during suspend (power LED blinks) - `slp_s0_residency_usec` still increases after suspend Change-Id: I919d75cb2a88c0d623c46e44c506ec2d85567995 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-01-13mb/msi/ms7d25: Add support for DDR5 variantMichał Żygowski
The DDR5 board is almost identical to the DDR4 one. The only major difference is the board's DDR5 memory design. TEST=Boot MSI PRO Z690-A board successfully to Ubuntu 22.04. Memory: Crucial CT8G48C40U5.M4A1 in all 4 slots. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I652a879d1616df4708fe4690797ad98384897f53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2023-01-13mb/google/brya/var/omnigul: Update GPIO settingsjamie_chen
Configure GPIOs based from EE. BUG=b:263060849 BRANCH=None TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I5cfaa8fce6df7f09b744fb3e0b7b1d5b6acdc79b Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-01-12mb/intel/jasperlake_rvp/Makefile.inc: Remove path to non-existent directoryElyes Haouas
Fix: cc1: error: src/mainboard/intel/jasperlake_rvp/variants/jslrvp/include: No such file or directory [-Werror=missing-include-dirs] Change-Id: I5fee0053ab0281b713c33dbc5862c1d4587e854e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-12mb/intel/elkhartlake_crb/Makefile.inc: Remove path to non-existent directoryElyes Haouas
Fix: cc1: error: src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/include: No such file or directory [-Werror=missing-include-dirs] Change-Id: I1c6f6d99cfb3bc08966d662282c023e22e111f90 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-12mb/google/skyrim/var/markarth: Update devicetree settingJohn Su
Update devicetree based on the schematic_20230105. BUG=b:263534907, b:263216451 BRANCH=None TEST=FW_NAME=markarth emerge-skyrim coreboot Change-Id: I437425ac4a7cdb883dc213f5f6bb5f8a33a5577b Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71714 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-01-12soc/amd: Change Morgana codename to PhoenixMartin Roth
Now that the next generation of APUs is officially announced, we can unmask morgana. The chip formerly known as Morgana is actually Phoenix. Surprise! This patch just changes the name across the entire codebase. Note that the fw.cfg file will stay pointing to the 3rdparty/amd_blobs/morgana/psp directory until the amd_blobs_repo is updated. Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Change-Id: Ie9492a30ae9ff9cd7e15e0f2d239c32190ad4956 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71731 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-12mb/google/brya: Add romstage early graphics for bryaJeremy Compostella
BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=On-screen text message seen during MRC training on skolas with a few extra patches Change-Id: I41c9cccb09dea52e2318f8f9ebeeda3697a7b514 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71696
2023-01-11mb/google/brya: Enable eNEM support for Tanik and SkolasSubrata Banik
TEST=Able to build and boot Google/Tanik and Skolas to OS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4a21122dbc324d3a396e8934e21d42f471cdb0bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/71567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-01-11mb/siemens/mc_ehl1: Enable real-time tuningWerner Zeh
Enable the real-time tuning to improve performance in the real-time environment for this mainboard. Change-Id: I91ad7ca58add92b5cc66148aff8378890ee217eb Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71234 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-11mb/google/geralt: Use BOE_TV110C9M_LL0 as default mipi panelBo-Chen Chen
We will use BOE_TV110C9M_LL0 for geralt proto board, so update the panel setting. BUG=none TEST=emerge-geralt coreboot; see panel-BOE_TV110C9M_LL0 in coreboot.rom Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I28e9dd87350b55fdc609dd2c562c5a2ad578187c Reviewed-on: https://review.coreboot.org/c/coreboot/+/71786 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-11mb/google/geralt: Keep booting even if MIPI panel not foundBo-Chen Chen
We should keep booting even failed to get the MIPI panel. BUG=none TEST=emerge-geralt coreboot; Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I39d9e04e5908f669ae2a1a8ce8858b93cae20654 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71785 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-11mb/google/skyrim/var/frostflow: Update I2C setting for touchpadRex Chou
Update setting for touchpad I2C frequency. And meet touchpad i2c SPEC (380 ~ 400 kHz). BUG=b:261159229 TEST=On frostflow, touchpad i2c spec from EE measure Frequencies: I2C0 (Touchpad): 389 kHz Change-Id: Ie9efd4e597e2701c98064185e5b39a6e256a5f1c Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71772 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2023-01-11mb/intel/mtlrvp: Configure USB devices for MTL-RVPHarsha B R
This patch adds OC configuration of USB devices for MTL-RVP as per MTL-RVP design specification, USB 2.0 usb2_ports0 -> OC0 usb2_ports1 -> OC0 usb2_ports2 -> OC0 usb2_ports3 -> OC0 usb2_ports4 -> OC0 usb2_ports5 -> OC0 usb2_ports6 -> OC_SKIP usb2_ports7 -> OC_SKIP usb2_ports8 -> OC_SKIP usb2_ports9 -> OC_SKIP USB 3.2 Gen 2x1 usb3_ports0 -> OC0 usb3_ports1 -> OC0 TCPx tcss_ports0 -> OC0 tcss_ports1 -> OC0 tcss_ports2 -> OC0 tcss_ports3 -> OC0 BUG=b:224325352 TEST=Able to build with the patch and boot the mtlrvp to chromeOS (on top of CB: 66190). Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: If1a0c31b7bf0f3fc06f039ad76b0cdd41f7cdd90 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-01-11mb/google/nissa/var/craask: Disable storage devices based on fw_configReka Norman
Disable devices in variant.c instead of adding probe statements to devicetree because storage devices need to be enabled when fw_config is unprovisioned, and devicetree does not currently support this (it disables all probed devices when fw_config is unprovisioned). BUG=b:263920313 TEST=Boot to OS on craask eMMC and NVMe SKUs with both unprovisioned fw_config and fw_config set correctly. Change-Id: I4167ee4d00b9ae8fe074c6f5e7a2d5a7382bfe6d Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-01-11mb/google/nissa/var/yaviks: Disable storage devices based on fw_configReka Norman
Disable devices in variant.c instead of adding probe statements to devicetree because storage devices need to be enabled when fw_config is unprovisioned, and devicetree does not currently support this (it disables all probed devices when fw_config is unprovisioned). BUG=b:251055188 TEST=Boot to OS on yaviks eMMC and UFS SKUs with both unprovisioned fw_config and fw_config set correctly. On UFS SKU with fw_config set, eMMC no longer shows up in lspci. (On eMMC SKU, UFS and ISH were already disabled by the coreboot PCI scan so there's no change in behaviour.) Change-Id: I31402cb49cffefd98b6fed971f249528448b1d0d Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-01-11mb/google/brya/var/omnigul: Add memory parts supportAmanda Huang
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1) Samsung K3KL8L80CM-MGCT 2) Hynix H58G56BK7BX068 3) Micron MT62F1G32D2DS-026 WT:B 4) Micron MT62F512M32D2DR-031 WT:B BUG=b:264340545 BRANCH=firmware-brya-14505.B TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I699070596a77c975254660a1ba74b0f40026186d Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-01-10mb/intel/mtlrvp: Add romstage and configure DDR5 memory partsJamie Ryu
This patch adds initial romstage code and spd data for DDR5 memory parts for MTL-RVP. This also configures memory based on the board id. Memory - x32 DDR5 SBS SODIMM 1DPC Vendor/Model - SK-Hynix/HMCG66MEBSA092N BUG=b:224325352 TEST=Able to boot intel/mtlrvp (DDR5 SKU) to ChromeOS Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: I0e1a26d99e170311a89412f44b7cbb0430788f58 Signed-off-by: Harsha B R <harsha.b.r@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-01-10mb/google/dedede/var/dibbi: Generate SPD ID for supported partsLiam Flaherty
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. BUG=b:260934724, b:255447299 BRANCH=dedede TEST=build Change-Id: I8c95ced79e14bb4a99aa1fa5f4fc3bc0681cc1cc Signed-off-by: Liam Flaherty <liamflaherty@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71710 Reviewed-by: Adam Mills <adamjmills@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-10mb/google/brya/var/marasov: Update DPTF parametersFrank Chu
Add the first version DPTF parameters. BUG=b:264217345 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I55a3066ef61ce461f40b425a6549d083c29256e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71634 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Kyle Lin <kylelinck@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-10chromeos/cr50_enable_update.c: Clear EC AP_IDLE flagDerek Huang
When AP boots up after Cr50 firmware update and reboot, AP finds that Cr50 reset is required for Cr50 to pick the new firmware so it trigger Cr50 reset and power off the system, AP expects system will power on automatically after Cr50 reset. However this is not the case for Chromebox, Chromebox EC set AP_IDLE flag when system is shutting down, when AP_IDLE flag is set in EC, the system stays at S5/G3 and wait for power button presssend. It cause an issue in factory that the operator needs to press power button to power on the DUT after Cr50 firmware update. This patch sends EC command to direct EC to clear AP_IDLE flag after AP shutdown so AP can boot up when Cr50 reset. BUG=b:261119366 BRANCH=firmware-brya-14505.B TEST=DUT boots up after Cr50 firmware update in factory test flow Change-Id: If97ffbe65f4783f17f4747a87b0bf89a2b021a3b Signed-off-by: Derek Huang <derekhuang@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70773 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-10mb/google/brya: Allow respective variant to choose NEM configSubrata Banik
This patch introduces a new config named `DEFAULT_ADL_NEM` and allows respective brya variants with Alder Lake ESx samples to choose NEM over eNEM as eNEM was fuse disabled till ESx. TEST=The boot flow related to eNEM and NEM behaviour remains the same with and without this patch. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibbd492a3d210739120c7ad16415cb7912f5b70ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/71743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-10mb/google/brya/var/marasov: Disable touch panel power for non-touch skuFrank Chu
Disable touch panel power for non-touch sku by fw_config TOUCH field. BUG=b:263452842 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I4736f94481512806377b733b26fdc7290046c555 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71691 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kyle Lin <kylelinck@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-10mb/siemens/mc_ehl1: Limit SATA speed to Gen 2Werner Zeh
Due to mainboard restrictions a SATA link at Gen 3 (6 Gbps) can cause issues as the margin is not big enough. Limit SATA speed to Gen 2 to achieve a more robust SATA connection. Change-Id: Ia79998db5f959528a4e8e29e570a7f55283adee1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71230 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-01-09mb/google/dedede: Use runtime detection for touchscreensMatt DeVillier
Now that power sequencing has been implemented, switch from using ACPI "probed" flag to "detect" flag for all i2c touchscreens. This removes non-present devices from the SSDT and relieves the OS of the burden of probing. BUG=b:121309055 TEST=build/boot Windows/linux on multiple dedede variants, verify all touchscreens functional in OS, dump ACPI and verify only i2c devices actually present on the board have entries in the SSDT. Change-Id: I91e03bd1d96a6b2f0c3813665910133db0d6c308 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 11:48:05 +0000