summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2015-04-21veyron: Sync up SDRAM configurationsJulius Werner
This patch adds all SDRAM configurations currently in use for any Veyron board to all boards. In the future we might decide that we want to reuse known good memory from one board on another, and having all of these in there already might help us avoid a firmware rev. We can still differentiate them later if the need ever arises. Not touching Rialto since it already decided to go its own way and replace an existing RAM code with it's own 1GB configuration. Also adjusting the names of the recently added DDR3 4GB configs to fit the existing scheme. Includes changes from "veyron: The ODT function is disabled LPDDR3". BRANCH=veyron BUG=None TEST=Compiled all Veyron boards, booted on Jerry. Change-Id: I817efd4b467a5a9587475a82df207048173e7bd5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 36d3fe138b154a16700e3c7adbb33834ff1c5284 Original-Change-Id: I4d037967dcb5cbd6b2b82f347f6b19541559b61a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/255665 Reviewed-on: http://review.coreboot.org/9829 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21veyron_jerry: support K4B8G1646Q-4GB and H5TC8G63XXX-4GB ddr3jinkun.hong
add the K4B8G1646Q-4GB and H5TC8G63XXX-4GB ddr3 inf file, and use ram_id 1110 correspond to K4B8G1646Q-4GB ddr3 use ram_id 1111 correspond to H5TC8G63XXX-4GB ddr3 BUG=None TEST=Boot veyron_jerry normal BRANCH=None Change-Id: I3398516a9f2c2e44c9f5d08d0a3ab6e76b5c6f5f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b8dfc455bb93c2daf567e3b6e39c0a715e44311c Original-Change-Id: I90250cb84eb140f93c4fc655fb3b90584dd515c0 Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/255010 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9826 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21urara: add config of SPI bus and correct selection of winbond flashIonela Voinescu
Urara uses SPFI interface 1 and Winbond SPI NOR flash. BRANCH=none BUG=chrome-os-partner:31438 TEST=with the fix of the Winbond driver (next patch) the bootblock successfully probes the Windbond device on the FPGA board. Console log below: coreboot-4.0 bootblock Tue Nov 11 07:05:48 PST 2014 starting... SF: Detected W25Q16 with page size 1000, total 200000 Change-Id: Ia848eac5b4a94bf95297c928b5447463c90d89eb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 38386715c52526edbe9ad356945849e21799fd94 Original-Change-Id: Ic27b60adc26bf244e7a15b5257e94df4b9d88249 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/229030 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9809 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-20gigabyte/ga-b75m-d3v: Add GIGABYTE GA-B75M-D3V mainboardDamien Zammit
Board boots to linux. VGA works with rom. Change-Id: I96b73a90c3d88672f0d238f4b735cd2f96ef99bd Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/9803 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-20mainboard/lenovo/t430s,t530,x230:enable usb3, set xhci overcurrent mappingNicolas Reinecke
Tested on T530, T430s. Verified with lspci dump. Change-Id: I45acadb0c55534a67f7ad3e7bd84f4482a4344d7 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/9451 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-20Kconfig: rename CONSOLE_SERIAL_UART to DRIVERS_UARTPatrick Georgi
Some upstreaming patches missed that, so follow up. Change-Id: I28665c97ac777d8b0b0f909e64b32681ed2b98f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9771 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-04-18panther: Fix pointer related errors in LAN codeFurquan Shaikh
BUG=None BRANCH=None TEST=Compiles and boots to "starting kernel" on panther Change-Id: Ic71aea6d8939a4fa3cd890e2048fff22ea25d186 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4b5515bd00b76332748e4181cdf984c98a83993a Original-Change-Id: I2f890871ad7cddaf132a0fa59a93f05c51d0c00e Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234982 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9781 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
This change switches all mainboard vendors and mainboards to be autoincluded by Kconfig, rather than having to be mentioned explicitly. This means, vendor and mainboard directories are becoming more "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree mainboards / components to be built with a given coreboot version (given that the API did not change) Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ib68ce1478a2e12562aeac6297128a21eb174d58a Reviewed-on: http://review.coreboot.org/9295 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-17urara: Define UART used for serial consoleDavid Hendricks
BUG=chrome-os-partner:31438 BRANCH=none TEST=built and booted on urara with follow-up patches Change-Id: I0ed55f372e095f6b63a47734c4d223a575f63904 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a013de7daa7bf9d8a5f59e292c2a01401568d738 Original-Change-Id: I8ddf9e65a8ac3d4b09032a741b725c78251f14c9 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/243212 Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: http://review.coreboot.org/9778 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-17storm: Add STM flash supportVadim Bendebury
Compile in support for the STM flash devices. BRANCH=storm BUG=chrome-os-partner:33489 TEST=verified that both spansion and stm flash devices boot as expected. Change-Id: Ib616b2b52d29b20b4447c92115181a92c524ac39 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 34c0147b45551e9161e3f0e342a753907f27f9ae Original-Change-Id: I922afb91cc3ac5bf459d9746817d7677986b93cd Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/248993 Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9773 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-17ryu: Add support for EVT board with ID BASE3(1,1)Furquan Shaikh
BUG=None BRANCH=None TEST=Compiles successfully Change-Id: Ic5c2dafd87641879074f98d023de0379c6e2bfba Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3ba476b8a436303603d7205d19f66f06c63118cd Original-Change-Id: I6a1404ff23d62100739919e8f569da2041038f01 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/252352 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9763 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2015-04-17storm: handle dual purpose recovery buttonVadim Bendebury
Storm devices' recovery button is overloaded. Pressing it when the system is running is supposed to reset the device. To trigger recovery mode the button must be held pressed for at least 5 seconds after reset. Currently interpreting the recovery button state is the responsibility of the board (vboot gets a consolidated state, which is a combination of several conditions), so the simplest way to implement this feature is to make the board follow the recovery button state. In case the button is not pressed when it is first sampled, its state is saved immediately and no recovery request is reported. In case the button is pressed when it is first sampled, the board code keeps polling it up to 5 seconds and acts accordingly. BRANCH=storm BUG=chrome-os-partner:36059 TEST=tried starting a whirlwind with recovery button pressed for various durations, it entered recovery mode when the button was pressed longer than 5 seconds. Change-Id: Icb3250be7c2a76089c070acd68cb521d1399e245 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 45e7265bc760944f93dd98903d39d2b30aa96365 Original-Change-Id: Iab3609ebce3a74e3d0270775b83f3cf03a8837ca Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/251711 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/9761 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17ryu: add support for p4 boardsDavid Riley
BUG=none BRANCH=none TEST=P4 board boots and selects correct dts file Change-Id: Icdfdef9b82bd53413e45713f9ceef2e0c2be16a8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0674037b1f00845ffcd129cb54571f185b42af40 Original-Change-Id: If14e2586c4ef5b44af1754b3f06126b79473798b Original-Signed-off-by: David Riley <davidriley@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/250634 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9760 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17ipq806x: extend GSBI driver to support i2c on any GSBI blockSourabh Banerjee
The GSBI driver is extended to be able to program the CTRL reg for any given GSBI block. The NS and MD registers programming is made more readable by programming the M, N, D and other bits of the registers individually. Defined configure structs for each QUP block to be able to track the init status for each qup. Configured GPIO8 and GPIO9 for I2C fuction. BRANCH=chromeos-2013.04 BUG=chrome-os-partner:36722 TEST=Booted up storm P0.2, verified that the TPM on GSBI1 still works. Change-Id: I17906beedef5c80267cf114892080b121902210a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 07bc79211770decc1070c3a88874a4e452b8f5bc Original-Change-Id: I841d0d419f7339f5e5cb3385da98786eb18252ad Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/250763 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Trybot-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9759 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17ipq806x: add LPASS clock control driverVadim Bendebury
Add a clock control driver to initialize the clock tree inside the low-power audio subsystem. Depthcharge builds up on this to enable audio function on storm. The clock is hardcoded for 48KHz frame rate, two 16 bit channels. BRANCH=storm BUG=chrome-os-partner:35247 TEST=with depthcharge patches applied and Using depthcharge CLI audio test program verified that the target generates sensible sounds audio 100 100 audio 1000 5000 Change-Id: I56513fc782657ade99b6e43b2d5d3141d27ecc4e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0d4f408408aa38b2f0ee19b83ed490de39074760 Original-Change-Id: If8ffc326698fcea17e05d536930d927ca553481f Original-Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/248830 Original-Reviewed-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: http://review.coreboot.org/9758 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17ipq806x: Add support for mmu in bootblock.Deepa Dinamani
move mmu setup from RAM stage to boot block Enabling mmu earlier, helps speed up the boot time. BRANCH=storm BUG=chrome-os-partner:35024 TEST=Verified the mmu table dump matches the programmed values. Change-Id: I8f581538d5dfd0d78538c9fe50f689d54b740685 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fb799a6d61f9c2f478434a71584d0edb94af4b59 Original-Change-Id: I110497875002a88add7eb4312a70c0de8c28bc4f Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/247120 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Trevor Bourget <tbourget@codeaurora.org> Reviewed-on: http://review.coreboot.org/9756 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17veyron_{brain,danger,rialto}: Enable eventloggingDavid Hendricks
This brings brain, danger, and rialto up to parity with other veyron platforms as far as eventlog functionality is concerned. BUG=chrome-os-partner:34436 BRANCH=none TEST="mosys eventlog list" shows events (tested on Brain) Change-Id: I186c5d18e5351c0eaf08ffecfd87506283c44b19 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1764bc53147718031231a6d125a4a1a96c4c6a8f Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Ief09299965f6f21bc5a40cef31cde61344025c2a Original-Reviewed-on: https://chromium-review.googlesource.com/239979 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9755 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17veyron_{brain,danger,rialto}: Use common watchdog rebootDavid Hendricks
This applies a previous patch ("chromeos: Provide common watchdog reboot support") to some veyron platforms that were missing it. BUG=none BRANCH=none TEST=built and booted on Brain Change-Id: I3eb431a57367b8f885844e4353a78f77515f5195 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b0c87dd4217917a35817c719efe43dd4ec442df0 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I2861939655a995d309847f64cecd974a740fae37 Original-Reviewed-on: https://chromium-review.googlesource.com/245633 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9754 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17rk3288: move reboot_from_watchdog() before rk808 settinghuang lin
we will use dvs to adjust the voltage in kernel, if device reset by watchdog in kernel, the dvs gpio may not reset, and we use the i2c to adjust rk808 voltage in coreboot, so it may failure. so we move the reboot_from_watchdog() before the rk808 setting. BUG=None TEST=Boot from speedy BRANCH=None Change-Id: I809c63153d49680d9c84462aafd7bae09106fa6e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 76efb4b0196eecc84664a4c5dce2221152a39c0a Original-Change-Id: I92b5c6413bbffe30566178de89df1f9683790982 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/244289 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9752 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17purin: add purin under mainboardDaisuke Nojiri
this change covers bootblock and romstage. BUG=none BRANCH=tot TEST=ran emerge-purin coreboot Change-Id: Ifffb2e93189e8e85338de469432f3296e3e71791 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cd479583404958f72461e9c1639f0288a00f228e Original-Change-Id: Iaee4a8c457e42386a4100a8121144b8cf5f21e8c Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/242853 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9751 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17chromeos: Provide common watchdog reboot supportJulius Werner
Many ChromeOS devices use a GPIO to reset the system, in order to guarantee that the TPM cannot be reset without also resetting the CPU. Often chipset/SoC hardware watchdogs trigger some kind of built-in CPU reset, bypassing this GPIO and thus leaving the TPM locked. These ChromeOS devices need to detect that condition in their bootblock and trigger a second (proper) reboot. This patch adds some code to generalize this previously mainboard-specific functionality and uses it on Veyron boards. It also provides some code to add the proper eventlog entry for a watchdog reset. Since the second reboot has to happen before firmware verification and the eventlog is usually only initialized afterwards, we provide the functionality to place a tombstone in a memlayout-defined location (which could be SRAM or some MMIO register that is preserved across reboots). [pg: Integrates 'mips: Temporarily work around build error caused by <arch/io.h> mismatch] BRANCH=veyron BUG=chrome-os-partner:35705 TEST=Run 'mem w 0xff800000 0x9' on a Jerry, watch how a "Hardware watchdog reset" event appears in the eventlog after the reboot. Change-Id: I0a33820b236c9328b2f9b20905b69cb934326f2a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fffc484bb89f5129d62739dcb44d08d7f5b30b33 Original-Change-Id: I7ee1d02676e9159794d29e033d71c09fdf4620fd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/242404 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Id: c919c72ddc9d2e1e18858c0bf49c0ce79f2bc506 Original-Change-Id: I509c842d3393bd810e89ebdf0dc745275c120c1d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/242504 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9749 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17veyron_*: Enable eventloggingDavid Hendricks
BUG=chrome-os-partner:34436 BRANCH=none TEST=Built and booted on pinky w/ depthcharge fmap patch, used mosys to verify that eventlog entries get populated: entry="0" timestamp="2015-01-06 13:45:33" type="Log area cleared" bytes="4096" entry="1" timestamp="2015-01-06 13:45:33" type="System boot" count="0" entry="2" timestamp="2015-01-06 13:45:33" type="Chrome OS Developer Mode" Change-Id: I74ba8b271328453c8b91f11e7858754a80806c31 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 197010f057f4835a30ed2e71f47ca51fc181afe4 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I19cb884be5c3e00975599e96e0223e33d32e7c0d Original-Reviewed-on: https://chromium-review.googlesource.com/238830 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9644 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17uart: pass register width in the coreboot tableVadim Bendebury
Some SOCs (like pistachio, for instance) provide an 8250 compatible UART, which has the same register layout, but mapped to a bus of a different width. Instead of adding a new driver for these controllers, it is better to have coreboot report UART register width to libpayload, and have it adjust the offsets accordingly when accessing the UART. BRANCH=none BUG=chrome-os-partner:31438 TEST=with the rest of the patches integrated depthcharge console messages show up when running on the FPGA board Change-Id: I30b742146069450941164afb04641b967a214d6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42 Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/240027 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9738 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-17blaze: add new Hynix 2GB BCTNeil Chen
- Hynix H5TC4G63CFR-PBA, ramcode = 5 BUG=chrome-os-partner:34695 TEST=emerged coreboot, booted successfully into kernel. Change-Id: I53f9ebd9c38c645d1eb8b685d39e8beb55bd3c6a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ee6fdcc28402fe324d08b713498488d863d1d30f Original-Change-Id: I829d4e1f992eadd445c313729eb4bca5ce602f53 Original-Reviewed-on: https://chromium-review.googlesource.com/245947 Original-Reviewed-by: Neil Chen <neilc%nvidia.com@gtempaccount.com> Original-Tested-by: Neil Chen <neilc%nvidia.com@gtempaccount.com> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Neil Chen <neilc%nvidia.com@gtempaccount.com> Reviewed-on: http://review.coreboot.org/9736 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17rk3288: detect sdram size at runtimehuang lin
we use Kconfig define sdram size before, but there may use different sdram size in the same overlay, so we must detect sdram size at runtime now. If we use 4G byte sdram, we can use[0x00000000:0xff000000], since the [0xff000000:0xffffffff] is the register space. BUG=chrome-os-partner:35521 TEST=Boot from mighty BRANCH=None Change-Id: I7a167c268483743c3eaed8b71c7ec545a688270c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ad4f27dd08c467888eee87e3d9c4ab3077751898 Original-Change-Id: Ib32aed50c9cae6db495ff3bab28266de91f3e73b Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243139 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9734 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17veyron: move setup_chromeos_gpios() prototype to board.hJulius Werner
I always had that TODO comment in there but I had already forgotten what I even meant by it. It's really just a simple cleanup... this function is (currently) veyron-specific and doesn't belong in common code. BRANCH=veyron BUG=None TEST=Booted Jerry. Change-Id: Iccd6130c90e67b8ee905e188857c99deda966f14 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d188398704575ad2fedc2a715e609521da2332b0 Original-Change-Id: I6ce701a15a6542a615d3d81f70aa71662567d4fa Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/241190 Reviewed-on: http://review.coreboot.org/9733 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17urara: add board id information for urara boardIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA; works as expected. BRANCH=none Change-Id: If4493fcb37cf649fb0a56d594ac58556da3aa571 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f6764396be1ab17875d9c73624cce48dc6790e6 Original-Change-Id: I925ebd6ea4fc30c1c1d91559f96eaad62d06aba8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/239490 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9724 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17rk3288: Add a config variable hack to skip display initDavid Hendricks
The current display init code causes Brain to crash when trying to allocate resources. This just avoids doing display init if a config variable is set. Once code has been implemented to properly setup different types of displays we can get rid of this hack. BUG=none BRANCH=none TEST=built and booted (to depthcharge) on Brain, compiled for pinky with FEATURES=noclean and ensured config variable is 0 Change-Id: I9a7266c6bff5b7a6eb05b2b21fb65797bee392d6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 804632ca67eaaf4174ca597d83b8923cb9abd1b7 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I04c9e8181c58fa0608fd20776fa8c4798a023474 Original-Reviewed-on: https://chromium-review.googlesource.com/235922 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9720 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17veyron: Activate Winbond SPI driverJulius Werner
This patch activates the chip driver for Winbond SPI flash (which, incidentally, looks 99.9% the same as the Gigadevice driver but still requires some extra 500+ bytes of object code... there's definitely room for improvement here). Shuffle around rk3288 memlayout to make a little more room in the bootblock. BRANCH=veyron BUG=chrome-os-partner:34176 TEST=Booted Pinky. Checked bootblock and verstage memsz of final binary and noticed that both only have less than 500 bytes left against their memlayout boundary. The next piece of code we add will cause some serious headaches... Change-Id: I97ea6ac334104e4219e310afc557c164b2ff19d9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8769e5a34ad3cd417132646fbb58ff51c29fb640 Original-Change-Id: Id2f1204c30aa28251cf85cb80d7ca44947388dba Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236977 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9719 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15rk3288: support edp HPD functionhuang lin
we use the delay 200ms to meet the edp power timing request before, it waste time, so we use the HPD function to detect the edp panel now. In previous version, the hardware may not support the edp HPD function, so in the code it will spend 200ms to detect hpd single, if it don't get the hpd single, it will contiue the edp initialization process, to compatible all of the hardware version. BUG=chrome-os-partner:35623 TEST=Boot from Mighty, and display normal BRANCH=None Change-Id: I82c6a80e37fa42eef3521e6ebbf190d7e80fcece Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 7a5343eb9af12cae9a15284217762a91ae24bac6 Original-Change-Id: I21c0ef6ce4643e90a192d8b86659264895b5fda9 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/242792 Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: http://review.coreboot.org/9659 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15rk3288: meet the backlight power timing requesthuang lin
backlight timing: LED_VCC->LED_PWM->LED_EN, we modify the code to meet the timing. BUG=chrome-os-partner:36201 TEST=Boot from jerry, and scope the backlight timing BRANCH=None Change-Id: I6bfa6af176400086e4af0112a63127c1152ca70e Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 52ac0b2944cea7dc860bfea12fe44851436bb7f7 Original-Change-Id: I6c53a822410ad706383c6d9fa2b5f0437775f710 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/244639 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15veyron_rialto: Change recovery GPIO to PUSH_KEY.Hung-Te Lin
The recovery button on Rialto should be GPIO 255, the LED Push Key. Note we want to keep the recovery button on servo functional because many protos are not assembled and developers can't "push" the push key. The GPIO passed to payloads (and kernel) is only mapped to Push Key. BUG=none TEST=emerge-veyron_rialto coreboot chromeos-bootimage BRANCH=veyron_rialto Change-Id: I66f94cf232caa53a3b28db517620e4b6e9b9af0e Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 66ee55f6312efaeb337eb2881cd5eff5365b4105 Original-Change-Id: I0a7ebeed6506fbd938084c9a078a7cf1c7b914b9 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/244515 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9657 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15veyron_rialto: Fix boot failure in romstage.Hung-Te Lin
The FMAP for Rialto has no ecrwhash and would cause verstage to incorrectly load ramstage (instead of romstage) when looking for subsection inside RW blob. We have to override the index of stages to boot correctly. BRANCH=veyron_rialto BUG=none TEST=emerge-veyron_rialto coreboot chromeos-bootimage Boots successfully on Rialto boards. Change-Id: I031703d97a68e42dc17630ab5df85f8cba47e5e5 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 24ba4b16b4a2fe5469296f8d40286ed926cefc3c Original-Change-Id: I637ea23e1e8265781e52367d1306dbf854c2ccad Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/244577 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9656 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-15google/veyron_*: Remove unused sdram-ddr-hynix-2GB.inchuang lin
BRANCH=None TEST=Build speedy, pinky, mighty BUG=None Change-Id: If561872274bcdc2652c2bfe80cf5bd0501ad6b64 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: e6be62b4e64b13e285eb0480fdc65d814c6dadc0 Original-Change-Id: I7c97d54f3a4c94f7e23d3e85b808cd64b1cacec7 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241939 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9651 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-15Jerry: add SAMSUNG K4B4G1646Q-HYK0 ddr3 sdram supportPaul Ma
K4B4G1646Q-HYK0 is a variant of K4B4G1646D-BYK0 with a different physical package and the same config parameters. BRANCH=none BUG=chrome-os-partner:34940 TEST=boot on Jerry board with K4B4G1646Q-HYK0 Change-Id: I485eede309850ef6b3a52e2a548b6b032d281293 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: e925d784e1ebe444f5a5bcab47c8a661b0c6c527 Original-Change-Id: I31bcb348a45ff76e8e08127063bd0d04443ccb79 Original-Signed-off-by: Paul Ma <magf@bitland.com.cn> Original-Reviewed-on: https://chromium-review.googlesource.com/241787 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Trybot-Ready: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9650 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: support H5TC4G63CFR sdram in jerryhuang lin
BRANCH=None TEST=Boot and run jerry rev2 board BUG=None Change-Id: I95ec99e444c9cff3008bac5d1e6c3365fc2229a0 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: f9075e6172d1ae503dc26bac8f1057455dc93c39 Original-Change-Id: Ice60a4576c9eb386599a545c1b8d470e8a2eed68 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/236500 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Paul Ma <magf@bitland.com.cn> Original-Tested-by: Paul Ma <magf@bitland.com.cn> Reviewed-on: http://review.coreboot.org/9635 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-04-15veyron: Add veyron_rialto boardjinkun.hong
Derived from of veyron_brain with new memory configuration. BUG=chrome-os-partner:35072 TEST=built and boot on rialto-rev0 boards. BRANCH=veyron Change-Id: I2c6f74d231e39de76ef2399fdb20efae977b34fa Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 17d66e5f58562427badd6973ebb053f58573c040 Original-Change-Id: I8626ff5da8098ca120481b8cda0c6703f806711e Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com> Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/238946 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Trybot-Ready: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9649 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15ipq806x: load and start RPMVadim Bendebury
This patch finds the RPM image in the CBFS, loads it as defined by the MBN header and signals to the RPM processor where the image is located and waits for confirmation of the RPM starting. The interactions with the RPM processor are copied as is from the vendor provided sample code. Debug messages added to help identify problems with loading the blobs, should they ever happen. BRANCH=storm BUG=chrome-os-partner:34161 TEST=ramstage reports both TZBSP and RPM starting. Change-Id: I81e86684f9d1b614f2059ee82c6561f9484605de Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bbf2eda04a6e72b4f7b780f493b5a1cea0abfeb7 Original-Change-Id: Ic10af0744574c0eca9b5ab7567808c1b8d7fe0c2 Original-Signed-off-by: Vikas Das <vdas@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236661 Original-Reviewed-by: Varadarajan Narayanan <varada@qti.qualcomm.com> Reviewed-on: http://review.coreboot.org/9692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: Add watchdog reset api.Deepa Dinamani
Use the apps processor watchdog reset to do a hard reset. The watchdog reset drives the RESETOUT on the chip. Modify register address definitions to be able to use pointers and pointer arithmetics. BRANCH=storm BUG=chrome-os-partner:34334 TEST=the chip resets and the control returns to start of SBL. Change-Id: Ib5772ab152b27058fde1be9de2d2ac26bfe00ca4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d50413cb614ef05ada93be1252fe5ef617a94d91 Original-Change-Id: I9b249d057b473429335587f7241ca462b4a6a8b7 Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236141 Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> Reviewed-on: http://review.coreboot.org/9691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq806x: Load TZBSP blob from coreboot ramstageVikas Das
Read the TZBSP blob from CBFS and run it. A side effect of the blob execution is switching the processor into User mode. Starting TZBSP requires processor running in Supervisor mode, TZBSP code is compiled for ARM. Coreboot is executing in System mode and is compiled for Thumb. An assembler wrapper switches the execution mode and interfaces between Thumb and ARM modes. BUG=chrome-os-partner:34161 BRANCH=Storm TEST=manual With the preceeding patches the system successfully loads to depthcharge in recovery mode. Change-Id: I812b5cef95ba5562a005e005162d6391e502ecf8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7065cf3d17964a1d9038ec8906b469a08a79c6e2 Original-Change-Id: Ib14dbcbcbe489b595f4247d489d50f76a0e65948 Original-Signed-off-by: Varadarajan Narayanan <varada@qti.qualcomm.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229026 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9690 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: adjust rombase startup to vboot2Vadim Bendebury
Memory needs to be initialized before rombase proceeds. BRANCH=storm BUG=chrome-os-partner:34161 TEST=boots into depthcharge Change-Id: Id16b17685ff15c2a69d630eb8042e15549ae8b21 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7e8aeb38206b806d5656052d0f210faa769e28b8 Original-Change-Id: I0616c7dc7f08332ac0d96d4baf2618b067606fdf Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234544 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9689 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq8064: add DRAM initialization codeVadim Bendebury
Read two blobs from CBFS: cdt.mbn (memory configuration descriptor) and ddr.mbn (actual memory initialization code). Pointer to CDT which starts right above the MBN header is passed to the memory initialization routine. Zero return value means memory initialization succeeded. BRANCH=storm BUG=chrome-os-partner:34161 TEST=with upcoming patches memory initialization succeeds. Change-Id: Ia0903dc4446c03f7f0dc3f4cc3a34e90a8064afc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1d79dadd7d47dd6d01e031bc77810c9e85dd854b Original-Change-Id: Ib5a7e4fe0eb24a7bd090ec3553c57cd1b7e41512 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234644 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9686 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq806x: add i2c driverVadim Bendebury
this change ports i2c and other relevant drivers from depthcharge for ipq806x. BUG=chrome-os-partner:33647 BRANCH=ToT TEST=Booted storm using vboot2 Change-Id: I3d9a431aa8adb9b91dbccdf031647dfadbafc24c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a0c615d0a49fd9c0ffa231353800882fff6ab90b Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Id7cc3932ed4ae54f46336aaebde35e84125ebebd Original-Reviewed-on: https://chromium-review.googlesource.com/229428 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9685 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15google/storm: prepare enabling vboot2Vadim Bendebury
This change sets up the list of source files for vboot2's verstage without enabling it. BRANCH=storm BUG=chrome-os-partner:34161 TEST=not much testing yet, just successful compilation. Change-Id: I4052c20795459bf0e057c0f0952226ea4a8c89f1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 48847ab8acfbe4b33d61d3d012c72c025cd8f364 Original-Change-Id: I1d7944e681f8a4b113a90ac028a0faba4423be89 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234643 Reviewed-on: http://review.coreboot.org/9684 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: add code for detecting rec/dev/write protect switches' statusDaisuke Nojiri
The gpio access code has been moved to a separate file to match other platforms. Accessor functions are added to read different switches state. They will be read by verstage, when it is enabled, and by ramstage, for passing the values to depthcharge. It is unfortunate that the gpio values are not being cached and can change by the time CBMEM table is filled, but we have to live with that for now. BUG=chrome-os-partner:33756,chrome-os-partner:34161 BRANCH=storm TEST=none yet. Change-Id: I229fed0e35d643912f929671d5fc25aee5d1d167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7e15aa281a1dbf2c463650b6c04991436022d8d4 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I940b54cd3cf046b94d57d59d370e634a70a8bbeb Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229426 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9681 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15veyron: Add "backlight" GPIO to coreboot tableJulius Werner
This patch adds a new "backlight" output GPIO to the coreboot table in order to avoid redundantly defining that GPIO in the payload. BRANCH=veyron BUG=chrome-os-partner:34713 TEST=Tested together with corresponding depthcharge CL. Change-Id: Ia997beb1a400136ad65d8f0217781c9782f6e8a5 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 04ce4c23573cf926aeef3d817d3ab00835f897c7 Original-Change-Id: I69b3c7ac6be4b9723b6a0dfecef5e1c4ea681aff Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/242400 Original-Tested-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9652 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15brain: remove sdmmc_power_off() in romstageDavid Hendricks
LDO4 and LDO5 are not turned on with the boot0 and boot1 RK808 strappings that we use on Brain. BUG=none BRANCH=none TEST=built and booted on brain Change-Id: I00393ca54958d9fff926606405edcd84901e4048 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: c4c1862585fd058a8a9c8237c701b3bbf3b8aa83 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I846ef9d67a780cc07414d545524b9ec0b8490cf1 Original-Reviewed-on: https://chromium-review.googlesource.com/241734 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9648 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron_danger: Enable EDP display initDavid Hendricks
Danger has EDP, the original code was copied from Brain which didn't. BUG=none BRANCH=none TEST=built and booted on danger Change-Id: Ib8e48078cc51fe0e1fb7049f70e810b8f0a7690a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 25fc6b4d82fb4bd80798cc809af4dacc6208109e Original-Change-Id: Ic8b3f685e08bb96125c57d42db6a10e348a1a096 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/245161 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9679 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Danger: Apply differences between Brain and DangerDavid Hendricks
This applies the differences between Brain and Danger: - Danger has an SDMMC slot - Danger has a USB hub (TODO) - Danger has LVDS (TODO) - Add workaround for incorrect RAM_ID strapping BUG=none BRANCH=none TEST=emerge-veyron_danger coreboot works Change-Id: Idec527744de2583613b290e3e88850b33ff1c23d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 89278c2eeae4bae989a3549da627c5bbd5dd0d5a Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Iae3f85d4f41e04465a5046f2334c693337d006a4 Original-Reviewed-on: https://chromium-review.googlesource.com/241712 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9647 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Danger: Initial mainboard importDavid Hendricks
This adds a directory with files copied over from Brain along with build-related changes so that emerge-veyron_danger works. The next patch will account for other differences. BUG=none BRANCH=none TEST=emerge-veyron_danger coreboot works Change-Id: I7ebd431cd48e257dfa761d32013d0e251b4f155d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a0f7d2f96540df6fdcd7a99d9e0fa02bbc6c1f73 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id265a7715f07a647a449f00097bf40f7c9b4c068 Original-Reviewed-on: https://chromium-review.googlesource.com/241711 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9646 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron_*: Move PMIC_BUS to a Kconfig variableDavid Hendricks
This moves PMIC_BUS from each mainboard's board.h file to a per- mainboard Kconfig variable. To prevent humans from forgetting to set a valid value, an invalid default is set in the rk3288 Kconfig and checked in rk808.c so that compilation will fail if the mainboard Kconfig does not override it. Originally, PMIC_BUS was only used by mainboard code as an argument to RK808 PMIC functions. To conform to the generic RTC API, however, the RK808 code needs to have the bus number globally defined somewhere since the rtc_get() and rtc_set() functions don't take any args. Since CONFIG_PMIC_BUS is globally visible, we no longer need to pass bus number to the PMIC functions. BUG=chrome-os-partner:34436 BRANCH=none TEST=built and booted on Pinky Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I73783878e507b2e7b1526dd2f81cfbdf8f1e2a55 Reviewed-on: https://chromium-review.googlesource.com/240203 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9642 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: add H9CCNNN8GTMLAR sdram in speedyJiazi Yang
BRANCH=None TEST=emerge-veyron_speedy coreboot BUG=None Change-Id: Iab377e93472db0b7778df020afa84ee97f0e4079 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: fedf6ed7dc220d58ad10d49ac9ea02443746e77e Original-Change-Id: Id5024bfd32a0aa1fb00f3af8dc337ccccaf40729 Original-Signed-off-by: Jiazi Yang <Tomato_Yang@asus.com> Original-Reviewed-on: https://chromium-review.googlesource.com/237544 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Trybot-Ready: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9640 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Support Speedy v1 hardwarehuang lin
BUG=None TEST=emerge veyron_speedy and boot the Speedy board BRANCH=None Change-Id: Ida5fd6d839a2e704760a90e9c723c1b688ea6a84 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 42c0d11c3ec65874986c06ca4d7b34f5987f9409 Original-Change-Id: I2f0cff74517a8c031eabb64f4f82d455195c8dd1 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234715 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9639 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Brain: Apply differences between Jerry and BrainDavid Hendricks
This applies the differences between Jerry and Brain: - No EC - No SD card - Minor changes to GPIOs (no lid, power button active low) - No variations between board IDs (yet) - No backlight/display attached, but we do have some HDMI and VOP configuration (need to double check that it's right). BUG=none BRANCH=none TEST=built and booted on Brain (requires follow-up CL to get into depthcharge) Change-Id: Idbbc19856e05a145637c28d87c3e19855d13f03b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 67151129c28ca7dd83464e5a5c183d006299293c Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I3c761d3d4d186a6208a772c05193bdcbd4a5c105 Original-Reviewed-on: https://chromium-review.googlesource.com/235921 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9638 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Brain: Initial mainboard importDavid Hendricks
This adds a directory with files copied over from Jerry, in addition to build system related changes (configs/* and Kconfig stuff) necessary to emerge-veyron_brain coreboot. The next patch will account for differences between Jerry and Brain. BUG=none BRANCH=none TEST=emerge-veyron_brain coreboot works Change-Id: Ib0da9caf80f46991b96bcb5756f807237f0902e1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 9509d6277dae25a78062c1301054a39f704b33fe Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I972f2623d9b0a43e3ea5312b3c4cd34ab44edc36 Original-Reviewed-on: https://chromium-review.googlesource.com/236989 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9637 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15blaze: add new Micron 2GB BCTNeil Chen
This BCT table is the same as "ramcode == 1", and has been pass the stress test with this new Micron type. -Micron MT41K256M16LY-107:N, ramcode = 4 BUG=chrome-os-partner:32071 TEST=emerged coreboot, booted successfully into kernel. Change-Id: I80990fec6faf5dd2b8090658d865cc8dde31b753 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: bce2bf1fd518077e06d70d78a65d58ddef7b7bc6 Original-Change-Id: I2c0b28fdafb5299784519e641aa4edb53d0c36b2 Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/236514 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9636 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Fix TPM I2C initialization and sync boardsJulius Werner
Due to a missing i2c_init(), we were actually running our TPM with default divisors at 660KHz. Oops. While it's commendable that both the TPM and our controller seem to have been running fine all this time at more than 1.5 times the maximum frequency they support, we should probably still get that fixed. Also sync Speedy back up to the other Veyron boards since it seems to have missed a recent SDMMC patch. BRANCH=None BUG=None TEST=Booted Pinky. Change-Id: I255c66624b21bf48b12f950208ba2c401a75c4e4 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: f2bd7c8579cd90d2f800c777c1981557d81a9b49 Original-Change-Id: I43e6b5fe02aca605a5b243c5b876bd44b90b2bf9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236580 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9634 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron_*: Use common CBFS wrapperDavid Hendricks
This switches all the rk3288 platforms to use the common CBFS wrapper instead of implementing its own CBFS media driver. It also happens that veyron_* platforms use Gigadevice SPI flash (at least for now). As we use more SPI-related stuff, for example eventlog and vboot data in Brain's case, we will need to use more of the SPI API anyway. This prevents us from having to duplicate pieces of it for rk3288. BUG=none BRANCH=none TEST=built and booted on Pinky Change-Id: Ie462456814646fdc277485d9e2d8c901fd4936e7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2d6df2fe6d78bc8eee8689019b9aaf29c82b6b30 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id307bd5fb6cc8f79411d8c66e1370e80c58d017b Original-Reviewed-on: https://chromium-review.googlesource.com/235882 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9678 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-15veyron: Support Mighty v1 hardwarehuang lin
BUG=None TEST=emerge veyron_mighty and boot the Mighty board BRANCH=None Change-Id: I0047569c9eed7a3881500ba3b05e6726ba8d7b8f Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 49366e5bb3ecdec38c898c936392e5d77a91cd53 Original-Change-Id: I3fcdc837e8d7e62c145850f549662d8260aa1120 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234714 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9633 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Support Jerry v3 hardwarehuang lin
BUG=None TEST=emerge veyron_jerry and boot the Jerry board BRANCH=None Change-Id: I38cb0106694ada431e6ab6194fce7ba1822bcbcf Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 6a061072860f74874f0098062806c01bdcb447bd Original-Change-Id: I6eb0900516bcd95159c472749c54d356448d2344 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234713 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9632 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Support Pinky v4 hardwarehuang lin
BUG=None TEST=emerge veyron_pinky and boot the Pinky board BRANCH=None Change-Id: I75bc1b7681c9a3d7dc2868a2b260884538587dbd Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 66069927618924af02a4e17503fa49ae2c31fdfc Original-Change-Id: I06242ade0cabbba56b16b3832a1b4b09bec6f06b Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234712 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9631 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Move backlight gpio control to mainboard.chuang lin
We use the devicetree to pass the backlight control gpio before, but if there have different board version, and it uses different io to control backlight, it will hard to distinguish it. So, we move the backlight control to mainboard, and use board_id to distinguish the backlight control. BUG=None TEST=emerge veyron_pinky and Boot the pinky board BRANCH=None Change-Id: Ifa81eb2455296f4b4285b681208f4393f266fb34 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 2ff7f65134dcf97f97757750eab41dcf8c7765d3 Original-Change-Id: I1ec8e04f4982c3a8c7e31d8dc2c75311b7199ffc Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234711 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9630 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Trigger hard reset (via GPIO) if last reboot was caused by watchdogJulius Werner
Like Nyan, Veyron boards use a GPIO to reset the system so that we can make the accompanying TPM reset secure and unforgeable. The normal kernel reboot driver knows that, but the SoC-internal watchdog doesn't. This patch implements a check for the global reset status register in the early bootblock and triggers a hard_reset() when it matches "first global watchdog reset" or "second global watchdog reset". Seems that the difference between the two is is a choice controlled by wdt_glb_srst_ctrl (unconfirmed), and we want this code to run in both cases. BRANCH=None BUG=chrome-os-partner:33141 TEST=Run 'mem w 0xff800000 0x9' from the command line, watch how you end up in recovery without this patch but can boot normally with it. Change-Id: Ice79648831e1e97d22325711da9e82bbf6bf3c75 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 5d7cb52b2c2dcb2fff0bf83fc168439dade4b1b7 Original-Change-Id: I2581bde84f0445c15896060544e9acb60de91c8c Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231734 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9629 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron_speedy: Support Samsung-4GB and Lynix-4GB LPDDRhuang lin
Add the Samsung-4GB and Hynix-4GB LPDDR inc files. Use ram_id 1000 correspond to Samsung-4GB LPDDR and use ram_id 1001 correspond to Hynix-4GB LPDDR. BUG=chrome-os-partner:33269 TEST=Boot veyron_speedy normal BRANCH=None Change-Id: I21983c48e1e99aa70ae9bb3fb6550ae9af472015 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: d34b19dc9b57b4f31dc1b28581f3f8fc0fcc7e6b Original-Change-Id: I55b6968c642df8c1f579e518232ab5d278e7e12f Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233859 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9628 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Add veyron_speedy boardhuang lin
Essentially a copy of veyron_jerry for now BUG=chrome-os-partner:33269 TEST=emerge-veyron_speedy coreboot BRANCH=None Change-Id: If8f32122e301df1766bca68b11efd8afe8be5e87 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: f49a151e1dd956ed2cf3ba0b1f9307442b61e639 Original-Change-Id: Ife457db4fd67fe69bcd4082694b3372eccfb304b Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233822 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9627 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Turn off SD card power in romstageJulius Werner
The only way to reliably reset an SD card in an unknown state is by power-cycling. Since a kernel may crash and reboot at any point, SD cards may be left in one of them fancy high-throughput modes that depthcharge (or, in fact, a newly booting kernel without prior knowledge) doesn't support, so we need to reset the card on every boot. This patch adds support to turn off an RK808 regulator completely and uses that to turn off SD card power rails in early romstage. The time until configure_sdmmc() in ramstage turns them back on should be more than enough to drain the power rail for an effective power-cycle. BRANCH=None BUG=chrome-os-partner:34289 TEST=Booted a Pinky from SD card, noticed that it works before and after this patch. Change-Id: Iaa5f7adaa59da69a964785c5e369ad73c6620224 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 95fba21907f1f3f686cb5a95b993736247db8f96 Original-Change-Id: I904b2d23ca35f765c000f9bee7637044f674eff9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/233713 Original-Reviewed-by: Alexandru Stan <amstan@chromium.org> Original-Tested-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9626 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-14storm: do not enable the ethernet switch by defaultVadim Bendebury
The ethernet switch, as soon as it is taken out of reset comes up in default (bridging) mode, which allows traffic to flow freely across the ports. Let's keep it in reset such that there is no cross port traffic happening while the device boots up. BRANCH=storm BUG=chrome-os-partner:32646 TEST=verified that the switch is held in reset during boot. Change-Id: Ia1dbb47d892d564145da17425a596bf9bad40d29 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 50551d8c9a44d1b63e0948070f6573adf7729d37 Original-Change-Id: I6bf698beddc98ce18fee6b3b39622e356c8cfbad Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224989 Original-Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-on: http://review.coreboot.org/9465 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14samus: Declare TPM in devicetree.cb and include ACPI deviceDuncan Laurie
This adds the TPM device to the devicetree and configures an active high edge triggered interrupt at IRQ10 and adds the ACPI Device for the TPM into the DSDT. It also cleans up the EC PNP ID to use the EISAID for an EC since there are now two PNP devices declared, and removes the unused ENABLE_TPM define at the top of the DSDT. BUG=chrome-os-partner:33385 BRANCH=samus TEST=build and boot on samus, ensure TPM is functional at IRQ10 CQ-DEPEND=CL:226661 Change-Id: I4b9b016014d136fbf9a37003003632821ae93a53 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0420e27b05d0f1568efa9beb849e0e8ff5995c86 Original-Change-Id: I2660cb30ac535da0b255603a619b9c09681ca947 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226663 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14wtm2/samus: fix coreboot compilation error with tpmp removedHarry Pan
Since CL:226662, all TPMP accessing should be removed as well, else it will cause wtm2 coreboot failed on build. BUG=none BRANCH=none TEST=./setup_board --board=fox_wtm2 && emerge-fox_wtm2 coreboot CQ-DEPEND=CL:226662 Change-Id: Ib25f2d32997ef82b0ebf049803f2c5002a0a3abf Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: c99456bf42544518e2a36b6e0bbfe7f4ee1b4aff Original-Change-Id: Ia0eebb1924bbb23979c880f7d05600a0cf1e4ca3 Original-Signed-off-by: Harry Pan <harry.pan@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/232165 Original-Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/9477 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: increase drive strength for SPIM1 MFIOsIonela Voinescu
This change is made only to make sure there is a good signal strength on the SPIM lines. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: I5b9427b14a407746fb5b707fa3b07a1a6774bfb1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: e9d953283a5b43bf967128ca73db0e90c2df32df Original-Change-Id: Ia589134cf0557613697d49fb0bdb1848af66f0e8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/249732 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9675 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: setup I2C0 clock and MFIOsIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: Ic805311d3aaf40da601c88cd05a73254088374bd Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: ad9427c069ed34ab91e93df59ec3361499b54982 Original-Change-Id: If8e142273afd2d591a975f4e7e34aa73e8d71b0c Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/250451 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9674 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: Reduce MIPS PLL jitterIonela Voinescu
The current MIPS PLL is configured in such a way that there is excessive jitter. Correct this by applying new PLL settings. The resultant frequency is 546MHz instead of 550MHz. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board as part of the JTAG loading script; BRANCH=none Change-Id: Ica1bfff29e01819b86cd2bb8b18d8adc9dfa3260 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0c04354b49b73d234492521d81b6600d487175b0 Original-Change-Id: I28b41b1e82dbdf9da21bf0ab74f9722cdad923f1 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/245620 Original-Reviewed-by: James Hartley <james.hartley@imgtec.com> Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-on: http://review.coreboot.org/9671 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: add clock setup for MIPS CPU, ROM and EthernetIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: Ie386d6af9eeba7a72b1b88d515e6cb1821569c6b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: d4b8d8b6f965296f9ecf62da8e5f383c3667b077 Original-Change-Id: I9eb464340b0475ae735ba5573ab0841dac0d74eb Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243215 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9669 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: remove call to printk before UART is initializedIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested in Pistachio bring up board; previous delay at the beginning of bootblock is fixed. BRANCH=none Change-Id: I30335677c96bfd651bc49e36b562c48588009d67 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 3d1eb117644af1323dd940e0a82a2ef44025d5b9 Original-Change-Id: I122df1f985163836bb2ddd027ef6ab2ce265d5dd Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243223 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9668 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: Configure clocks and MFIOsIonela Voinescu
Set elements: - UART1 clock dividers and MFIOs - SPIM1 clock dividers and MFIOs - USB clock dividers - System clock divider - System PLL - MIPS CPU PLL BUG=chrome-os-partner:31438 TEST=tested on Pisachio bring up board; UART, SPI NOR, SPI NAND, and USB have proper functionality. BRANCH=none Change-Id: Ib01186a652fd59295a4cafc3ca99b94aa9564f74 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 65e68d82f34bb40ef3cfb397ecf5df0c83201151 Original-Change-Id: Ia2c31bbbfc020dc4fd71c72b877414adfdfc42a8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241423 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9662 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14rush: Configure display related clock, pad, and powerJimmy Zhang
BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush Change-Id: I9c2235ccc5571f1919dc013c62488390fe31dcbc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7468c14842c680be81620ad3fd2ea9ae056d525f Original-Change-Id: Iaf7f70727fc914b9bb2d063c9a30ece4451d40da Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238942 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rush: devicetree: Define default dp panel parametersJimmy Zhang
DP panel parameters generally can be retrieved thru edid. The parameters specified here will be used when edid fetching failed. BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush and ryu Change-Id: I39e25c873561f75394408f6635aaa2e88b67d846 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c02facb9753de08f66f3ae40d7dca1eba50febc5 Original-Change-Id: I4785eca3ec03b48e8780ebf02389e9b46317e96d Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238941 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9612 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
We have known for a while that the old x86 model of calling init_timer() in ramstage doesn't make sense on other archs (and is questionable in general), and finally removed it with CL:219719. However, now timer initialization is completely buried in the platform code, and it's hard to ensure it is done in time to set up timestamps. For three out of four non-x86 SoC vendors we have brought up for now, the timers need some kind of SoC-specific initialization. This patch reintroduces init_timer() as a weak function that can be overridden by platform code. The call in ramstage is restricted to x86 (and should probably eventually be removed from there as well), and other archs should call them at the earliest reasonable point in their bootblock. (Only changing arm for now since arm64 and mips bootblocks are still in very early state and should sync up to features in arm once their requirements are better understood.) This allows us to move timestamp_init() into arch code, so that we can rely on timestamps being available at a well-defined point and initialize our base value as early as possible. (Platforms who know that their timers start at zero can still safely call timestamp_init(0) again from platform code.) BRANCH=None BUG=None TEST=Booted Pinky, Blaze and Storm, compiled Daisy and Pit. Change-Id: I1b064ba3831c0c5b7965b1d88a6f4a590789c891 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ffaebcd3785c4ce998ac1536e9fdd46ce3f52bfa Original-Change-Id: Iece1614b7442d4fa9ca981010e1c8497bdea308d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234062 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9606 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
Non-x86 boards currently need to hardcode the position of their CBFS master header in a Kconfig. This is very brittle because it is usually put in between the bootblock and the first CBFS entry, without any checks to guarantee that it won't overlap either of those. It is not fun to debug random failures that move and disappear with tiny alignment changes because someone decided to write "ORBC1112" over some part of your data section (in a way that is not visible in the symbolized .elf binaries, only in the final image). This patch seeks to prevent those issues and reduce the need for manual configuration by making the image layout a completely automated part of cbfstool. Since automated placement of the CBFS header means we can no longer hardcode its position into coreboot, this patch takes the existing x86 solution of placing a pointer to the header at the very end of the CBFS-managed section of the ROM and generalizes it to all architectures. This is now even possible with the read-only/read-write split in ChromeOS, since coreboot knows how large that section is from the CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be changed on systems that place other data next to coreboot/CBFS in ROM). Also adds a feature to cbfstool that makes the -B (bootblock file name) argument on image creation optional, since we have recently found valid use cases for CBFS images that are not the first boot medium of the device (instead opened by an earlier bootloader that can already interpret CBFS) and therefore don't really need a bootblock. BRANCH=None BUG=None TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco. Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229975 Reviewed-on: http://review.coreboot.org/9620 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstoolJulius Werner
Some projects (like ChromeOS) put more content than described by CBFS onto their image. For top-aligned images (read: x86), this has traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the area actually managed by CBFS, as opposed to ROM_SIZE) that is used to calculate the CBFS entry start offset. On bottom-aligned boards, many define a fake (smaller) ROM_SIZE for only the CBFS part, which is not consistently done and can be an issue because ROM_SIZE is expected to be a power of two. This patch changes all non-x86 boards to describe their actual (physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a mainboard Kconfig select (which is the correct place to declare unchangeable physical properties of the board). It also changes the cbfstool create invocation to use CBFS_SIZE as the -s parameter for those architectures, which defaults to ROM_SIZE but gets overridden for special use cases like ChromeOS. This has the advantage that cbfstool has a consistent idea of where the area it is responsible for ends, which offers better bounds-checking and is needed for a subsequent fix. Also change the FMAP offset to default to right behind the (now consistently known) CBFS region for non-x86 boards, which has emerged as a de-facto standard on those architectures and allows us to reduce the amount of custom configuration. In the future, the nightmare that is ChromeOS's image build system could be redesigned to enforce this automatically, and also confirm that it doesn't overwrite any space used by CBFS (which is now consistently defined as the file size of coreboot.rom on non-x86). CQ-DEPEND=CL:231576,CL:231475 BRANCH=None BUG=chromium:422501 TEST=Built and booted on Veyron_Pinky. Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71 Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229974 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9619 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13storm: Fix timer init order problemJulius Werner
Commit 257aaee9e3a (arm: Add bootblock_mainboard_early_init() for pre-console initialization) inadvertently moved the timer initialization after console initialization for IPQ806x, which is apparently not a good idea for this platform. This patch solves the issue by moving init_timer() to bootblock_mainboard_early_init(), which is the new hook explicitly provided to perform pre-console tasks. BRANCH=None BUG=None TEST=Built and booted Storm with 257aaee9e reverted. Noticed that it was already broken. Bisected coreboot and tracked down breakage to commit a126a62f (ipq8064: use the new utility to build bootblock). Built and booted successfully with this patch and a revert of a126a62f to confirm that the bug in question here is fixed. Change-Id: I4a3faa2aec8ff1fbbe6c389f1d048475aa944418 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 752d1f879f9bd841f18bd84842491f747458cf52 Original-Change-Id: Ie4aa2d06cb6fda6d5ff8dd5ea052257fb7b8a24b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/233290 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9574 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13storm: add hard_reset templateDaisuke Nojiri
this is required to do early firmware selection using vboot2. actual implementation can be done later. BUG=chrome-os-partner:33755 BRANCH=ToT TEST=Booted storm. Change-Id: I8e9e168ea6fa3af149d5ad4ca51c5c9bba4d986d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 611c24773478c8c212d567bb4f2cb9a09898ddc8 Original-Change-Id: Idd1a1de4991a19902ffe45f01be89d47f4413779 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229425 Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13rk3288: Move UART initialization to bootblock_mainboard_early_init()Julius Werner
This patch uses the new bootblock_mainboard_early_init() hook to run the UART pinmuxing on rk3288-based boards before initializing the console. This allows us to get rid of the hacky second console_init() call in bootblock_soc_init(). We can also simplify the pinmux selection a bit since we know that a given board always uses the same UART (still keep an assert around to be sure, though). BRANCH=None BUG=chrome-os-partner:32123 TEST=Booted on Pinky. Change-Id: I3da8b0e4bd609f33cedd934ce51cb20b1190024b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: caabda8fc1ddb4805d86fd9a0d5d2f3cf738bfaf Original-Change-Id: Ia56c0599a15f966d087ca39181bfe23abd262e72 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231942 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9604 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13arm: Add bootblock_mainboard_early_init() for pre-console initializationJulius Werner
On most platforms, enabling the console and exception handlers are amongst the very first things you want to do, as they help you see what's going on and debug errors in other early init code. However, most ARM boards require some small amount of board-specific initialization (pinmuxing, maybe clocks) to get the UART running, which is why bootblock_mainboard_init() (and with it almost all of the actual bootblock code) always had to run before console initialization for now. This patch introduces an explicit bootblock_mainboard_early_init() hook for only that part of initialization that absolutely needs to run before console output. The other two hooks for SoC and mainboard are moved below console_init(). This model has already proven its worth before in the tegra124 and tegra132 custom bootblocks. BRANCH=None BUG=chrome-os-partner:32123 TEST=Booted on Pinky. Compiled for Daisy, Storm and Ryu. Change-Id: I510c58189faf0c08c740bcc3b5a654f81f892464 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f58e84a2fc1c9951e9c4c65cdec1dbeb6a20d597 Original-Change-Id: I4257b5a8807595140e8c973ca04e68ea8630bf9a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231941 Reviewed-on: http://review.coreboot.org/9603 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13rush: Add and select DO_SOR_INIT config optionJimmy Zhang
Select DO_SOR_INIT to enable dp display api BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Change-Id: Iddf19195722856865a7c06ce96492012ab729184 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 31492f51c030aeb7a3ac792a02665642ec999405 Original-Change-Id: I4daca43239235ca6d233c4457096d3b98fcaf65c Original-Reviewed-on: https://chromium-review.googlesource.com/234274 Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com> Reviewed-on: http://review.coreboot.org/9586 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13ryu: Add and select DO_DSI_INIT config optionJimmy Zhang
Enable display supporting functions by select DO_DSI_INIT BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and rush Change-Id: Ie0e03506702ddab03d7f3fd2528c67c02126c7be Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 7133dfcd1afa221be92c6398221cf210d9eddf17 Original-Change-Id: I3a9f93107333ebf83ff235eb1b1e02fc747df3c6 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234272 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9585 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13ryu: display: Move display api to mainboardJimmy Zhang
Display configuration is board specific. The change here is preparing for supporting other than dsi interface. BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and test dev/rec mode, also build rush ok Change-Id: Ied39d5d539d2be4983ab70976bffbe51fccba276 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 36be6b2e35c6246d5384d71b9ab9d4ddbf17764a Original-Change-Id: I494a04f7d6c0dbad2d472f4c2cd0aabfb23b8c97 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234271 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9584 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13ryu: display: Split dc functions from dsi display codeJimmy Zhang
dc supporting functions can be used for other than dsi display interfaces. This change is preparing for supporting sor display interface. BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and test dev/rec mode, also build rush ok Change-Id: I8a310e188fae70d7726c4360894b392c4546e105 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a7ab7225e3419a0fd93894dbb9a959390f29945b Original-Change-Id: Id14cbd89457cb91c23526927a432f4eb7cc6291b Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234270 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9583 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13ryu: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
This configures I2S1 and the codec MCLK muxes to pass the PCM audio data to the RT5677 codec. Once depthcharge RT5677 codec driver changes are in, audio 'beeps' should be heard on boot (Ctrl-U / devmode/recmode). BUG=chrome-os-partner:32582 BRANCH=none TEST=Built and booted Ryu/A44. Change-Id: I2143d544c75ee7e03ffc809561171920650e8d7d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 600c12ddf3543d2dcb47fd3e2f0704803dac5957 Original-Change-Id: Ib071bcb41fba8f6d628a386ed233ec84a54b0323 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233945 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9580 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13rush: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
With this change, audio 'beeps' are heard on boot if Ctrl-U is pressed, or devmode/recmode is entered. I also tested via an explicit call to VbExBeep in the kernel boot path. Note that a couple of Rush CLs for depthcharge are needed for audio, too. BUG=chrome-os-partner:32582 BRANCH=none TEST=as above. Built and booted Rush/Norrin64. Change-Id: I43c65a4d11c5ab7b16289e19f3b42cfc0300ea7c Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 4a682fb2403f7c6d53e74bfa945481242577f6c3 Original-Change-Id: Ia37f077569afd806ce6574c4c58813fd7aca1644 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233671 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9579 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13rush: Add gpio config for PWR button and LID open switchJimmy Zhang
Due to CL https://chromium-review.googlesource.com/231250, depthcharge now detects gpio state based on gpio configurations done by coreboot instead of redoing configuration at depthcharge. However, PWR button and LID open pins have not been configured in coreboot. So, add the missing code here. Otherwise, TOT coreboot/depthcharge rush build can not load in kernel. BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush and test with pwr button press and lid switch Change-Id: I7acc5e021fa769f68d4cbfd7202df325d4ea73c2 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a25dff24a2dcd33fcd15eb766432414af215c3ab Original-Change-Id: I6c322cd987967920f236aae653294db079678408 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233322 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9575 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13nyan/rush/veyron: Align ChromeOS GPIOs to new modelJulius Werner
This CL makes slight changes to the ChromeOS-specific GPIO definitions of Tegra and Rockchip boards to prepare them for new features in depthcharge. It adds descriptions for the EC in RW and reset GPIOs, changes the value Tegra writes into the (previously unused) 'port' field to describe the complete GPIO information, and removes code to sample some GPIOs that don't need to be sampled at coreboot time (to help depthcharge detect errors and avoid using a stale value for something that should always represent the current state). BRANCH=None BUG=None TEST=None (tested together with depthcharge patches) Change-Id: I3774979dbe7cacce4932c85810596d80e5664028 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: df295d0432fbf623597cf36ebb170bd4f63ee08d Original-Change-Id: I36bb16c8d931f862bf12a5b862b10cf18d738ddd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231222 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9570 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13urara: add support for DMA coherent memory areaIonela Voinescu
The information about the DMA memory area is further passed through the coreboot table to the payload. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA; DMA memory area was used to test the functionality of the DWC2 USB controller driver; behavior was as expected. BRANCH=none Change-Id: I658e32352bd5fab493ffe15ad9340e19d02fd133 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0debc105b072a37e2a8ae4098a9634d841191d0a Original-Change-Id: Icf69835dc6a385a59d30092be4ac69bc80245336 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/235910 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9593 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-11hp/pavilion_m6_1035dx/cmos.layout: Remove unused optionsAlexandru Gagniuc
Some of the options in cmos.layout date back to the K8 days, and have not been used anywhere else, but K8. This makes nvramtool expose a very confusing set of options, most of which have no effect. Clean up the layout before it gets forked again. TEST: Booted linux, and checked 'nvramtool -a' output. Change-Id: I1c5f83790ec89ced4dcf954e4949f8554aef6087 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8378 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-10Add google/veyron_mighty boardKatie Roberts-Hoffman
Essentially a copy of veyron_jerry for now. BUG=chrome-os-partner:33269 TEST=build Change-Id: Ie2d115d57fe4b6359fa6bb16a2e85e88ec99e991 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9ec25b9cf2985786e55f0b85c3849ccbd42bddd4 Original-Change-Id: Icc45c8f8bf9f6916ba7187dde277d15cc60df8a2 Original-Signed-off-by: Katie Roberts-Hoffman <katierh@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/230961 Original-Commit-Id: 407b8b74a068220d8051dd0d85d9c4ec3ea14d51 Original-Change-Id: I546dbc41ccd191159e96b851424fcb37902a57ec Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231691 Reviewed-on: http://review.coreboot.org/9554 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10rockchip: support displayhuang lin
Implement VOP and eDP drivers, vop and edp clock configuration, framebuffer allocation and display configuration logic. The eDP driver reads panel EDID to determine panel dimensions and the pixel clock used by the VOP. The pixel clock is generating using the NPLL. BUG=chrome-os-partner:31897 TEST=Booted Veyron Pinky and display normal BRANCH=None Change-Id: I01b5c347a3433a108806aec61aa3a875cab8c129 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e4f863b0b57f2f5293ea8015db86cf7f8acc5853 Original-Change-Id: I61214f55e96bc1dcda9b0f700e5db11e49e5e533 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/219050 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9553 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron*: select VIRTUAL_DEV_SWITCHDavid Hendricks
Like most newer Chromebooks, Pinky and Jerry do not have physical dev switches. BUG=chrome-os-partner:33395 BRANCH=none TEST=built and booted on Pinky, crossystem prints a valid value for devsw_cur instead of an error. Change-Id: If97ffa6f99eb31c05915f3ee82aaf6bd252d29e4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: db302d7286d3e7df9442928dac1d611a2c103163 Original-Change-Id: I186518a59699d293c7938221b3ae45b27361c255 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229680 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9552 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron: Adapt to new board revisionsJulius Werner
This patch adds support for Pinky rev3 (board ID 2) and Jerry rev2: the power button GPIO changed polarity to low, the 5V_DRV pin for USB power was moved to the AP again (welcome back!), and the EMMC_RST_L is now finally on a port with the right IO voltage so we don't need any weird pull-up tricks anymore. Since there are very few Jerry rev1s around, we'll just move it over to the new code directly without introducing board ID differences (also, because I have no idea how they stuffed it this time... is this one actually called rev2?). BRANCH=None BUG=None TEST=Still boots on my Pinky rev2, though that doesn't say much. Change-Id: Id11044cedcaac5a4ae07e696893823925107a6db Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 55344a9518ff04edcef01bcd40817e9e4b613717 Original-Change-Id: Iddee360fbda357ecde4ae5fbb5c3a01fe0c22474 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229010 Original-Reviewed-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9551 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron_jerry: Port CPU overshoot preventionJulius Werner
This patch ports commit 567f616f (rk3288: slowly raise to max cpu voltage to prevent overshoot) to Veyron_Jerry. It also fixes include ordering and some comment grammar in the affected code. BRANCH=None BUG=chrome-os-partner:32716 TEST=None Change-Id: I4ac14a38e4b3acc4926d4f51f409ff12d9c841cf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 679014bc843788e8d4d5f5c7470ae76f8be5e942 Original-Change-Id: I9c0aba40ddd8a0852391df184034baa740d063df Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228938 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9550 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron*: sdram_get_ram_code() -> ram_code()David Hendricks
This enables RAM_CODE_SUPPORT for veyron* platforms and uses the generic gpio_get_binaries() function to read RAM_ID GPIOs. BUG=chrome-os-partner:31728 BRANCH=none TEST=built and booted on pinky Change-Id: I7a03e42a270bec7036004375d36734bfdfe6e528 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a325b204ff88131dfb0bdd3dfedb3c007cd98010 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Ibc4c61687f1c59311cbf6b48371f9a9125dbe115 Original-Reviewed-on: https://chromium-review.googlesource.com/227249 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9549 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>