summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-11-17mb/google: Add Chromebook marketing namesJonathan Neuschäfer
It's sometimes hard to find the code name of a Chromebook. Add the marketing names to Kconfig, since they are easily available. Information (mostly) taken from: https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices Unknown boards (unreleased, etc.): * Fizz * Foster * Nasher, Coral * Purin * Rotor * Rowan * Scarlet, Nefario * Soraka * Urara * Veyron_Rialto Baseboards: * Glados * Gru * Jecht * Kahlee * Nyan * Oak * Poppy * Rambi * Zoombini White label boards: * Enguarde * Heli * Relm, Wizpig TODO: How does this interact with the board_status code? Change-Id: I20a36e23bd3eea8c526a0b3b53cd676cebf9cd86 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-17amd/gardenia: Add defines in OemCustomize.cMarshall Dawson
Add a #define for MB_DIMM_SLOTS and verify it doesn't exceed the max supported for the device. AGESA's DRAM procedures follow the BKDG and may vary depending on the number of slots on the motherboard. DIMM numbering and ordering is also affected by this value. Replace hardcoded integers with defined values for DIMM slots and number of channels. Change-Id: I81aa0165660e7627f1d977ac40479700cff8b80b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21854 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-17mb/lenovo/t400/blc.c: Add LTN154P2-L05 to whitelistKevin Keijzer
TESTED on Lenovo T500 Change-Id: I5546641cb34264e29ccb3398dd68f6144dafe524 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/22367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-17mb/lenovo/t400: Add LTN154X3-L02 to list of known displaysKevin Keijzer
TESTED on Lenovo T500 Change-Id: I9c9fef82ca4af99c7d4813e0ab0e315fde93b972 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/22475 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-11-15variants/kahlee: Add thermal ASLMarc Jones
Connect the EC thermal to Kahlee and Grunt thermal ASL. Intialize GNVS thermal values in the mainboard finalize. BUG=b:67999819 Change-Id: I89159a5fd3c639e511139b8c5948b6a4ee19aaa3 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-11-15google/kahlee: Get power plug notification from the ECMarc Jones
Set the EC SCI reporting mask to include the power plug reporting. BUG=b:65637324 TEST=Check power_supply_info on AC/DC. Change-Id: I58814fc495081ffe8e47162da0fa4fbeba49d67b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-15mb/{amd/gardenia,google/kahlee}: move carrizo_fch.asl code to socRichard Spiegel
Code within carrizo_fch should be SOC specific instead of board specific. BUG=b:64034810 Change-Id: I5de2020411794bfcd3730789f62af9c9834a018b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22455 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-14mb/google/eve: Add DSP calibration clock name/rate for RT5514Cheng-Yi Chiang
Add a property for DSP calibration clock name and rate such that RT5514 codec driver can control ssp1_mclk for DSP clock calibration. BUG=b:67763576 TEST=boot on eve check RT5514 codec driver can get this device property. Change-Id: Icf9695ef67efb2bb073e39b2ece02d57f0460a0c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Original-Change-Id: Ie204dda81a099f23beb20be71380a8494a9bee31 Original-Reviewed-on: https://chromium-review.googlesource.com/756261 Original-Reviewed-by: Dylan Reid <dgreid@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/22451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Set DSP SPI clock to 12MHzDuncan Laurie
To enable faster download of hotword data set the SPI clock to the Realtek 5514 DSP chip to 12MHz instead of the default 1MHz. BUG=b:67763576, b:66161281 TEST=cras_test_client --listen /tmp/rec.raw, trigger hotword, and check the samples using hexdump or cras_test_client --playback_f /tmp/rec.raw Change-Id: I92710eae25613a8202c63888b86a269803c40fe6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Original-Change-Id: I7e50d755a90d739b6dec155228351c3974b2f3b9 Original-Reviewed-on: https://chromium-review.googlesource.com/686675 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Chinyue Chen <chinyue@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: Chinyue Chen <chinyue@chromium.org> Original-Commit-Queue: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/22450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Enable VMXDuncan Laurie
This feature was enabled at the kernel level, but that is triggering an issue where FSP expects it to be disabled so it forces a cold reboot on every warm reboot. Since we want this enabled anyway just set it this way in the BIOS so it matches what the kernel expects. BUG=b:68666100 TEST=pass firmware_FWtries on Eve with R63 OS image Change-Id: I294e34d25406365d591da06ce4c931b710cfbbaa Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: I964d3d30392d130e808f37a661f2c89ec926cf58 Original-Signed-off-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/749733 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Tune I2C4 hold timesDuncan Laurie
Tune PCH I2C4 hold times to ensure the frequency is always <400KHz. BUG=b:67029862 TEST=boot on eve and measure I2C4 at Tp262 to be 385KHz Change-Id: Ie93c5c40bc74069b285f6c3ee311f1bd7cefcaf1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: Iceabc806a17b9e6a144a4f6288c6cca790d03950 Original-Signed-off-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/739841 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Enable AER and LTRFurquan Shaikh
AER and LTR must be enabled individually on ports that need it, in this case it should be enabled for WiFi and NVMe. BUG=b:65457528 TEST=Wifi team verified that the performance is better with these changes. Change-Id: I0d688fe07a1f3117c1ca617c2ce78e0d024a3510 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: Ib059517fa782ccc18ba5ef1f76058a1898b7bf7a Original-Signed-off-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/671211 Original-Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Commit-Queue: Duncan Laurie <dlaurie@google.com> Original-Tested-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/22447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Use rt5663 driver and set propertiesDuncan Laurie
Use the rt5663 driver and provide values for the offsets which are needed for providing manual values to compensate the DC offset for L and R channels between headphone and headset. BUG=b:62712227 TEST=build and boot on eve and ensure rt5663 is functional. Change-Id: I88113616e4b7c79cff840168b7c54ae754dfa75f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: Ica4090636c1ff29f0298114e62c9cc6fe167a425 Original-Signed-off-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/611606 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Hsinyu Chao <hychao@chromium.org> Reviewed-on: https://review.coreboot.org/22446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/google/eve: Remove ACPI control of touchscreen powerDuncan Laurie
Change the touchscreen power control back to coreboot instead of under the ACPI _ON/_OFF methods, and switch the TOUCHSCREEN_STOP_L pin back to an output. This reverts previous changes to touchscreen GPIOs that were made to get back to a known good/working state. Having ACPI control these pins was resulting in a small percentage of touchscreen not being discovered at boot. This platform is not intending to use S0ix so the ACPI control is not needed. BUG=b:63718744 TEST=manual testing on Eve devices. Change-Id: I3fd64a435a053da1558ef736fe7baceee3c8f3a0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: Ia1e2ae7ca2a8b668c60fbda2aa50373e580646b2 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/572692 Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Commit-Queue: Duncan Laurie <dlaurie@google.com> Original-Tested-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/22445 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-14mb/amd/gardenia: Remove direct AGESA header includesMartin Roth
All AGESA headers should be included only through agesawrapper.h BUG=b:66818758 TEST=Build gardenia Change-Id: I3c9ae7a435fadabf577f1f65ad4a6aa6234e9a29 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-14mb/google/kahlee: Remove direct AGESA header includesMartin Roth
All Stoney AGESA headers should be included only through agesawrapper.h BUG=b:66818758 TEST=Build and boot tested Change-Id: I642f5caf8a37ae4042c32fec3a92e0995193cb7a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13mb/google/kahlee: Add getter function for GPIO arrayMartin Roth
Instead of getting the address of the GPIO function with an extern, add a getter function and make the GPIO arrays static. TEST=Build Grunt; Build & boot Kahlee BUG=b:69164070 Change-Id: I3defcb66696459b915d7d4f43234d5c08ab7d417 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13mb/google/kahlee: Remove mainboard.hMartin Roth
mainboard.h only had a single function definition. Move it into baseboard/variants.h and get rid of the file. TEST=Build grunt/kahlee BUG=b:69164070 Change-Id: I6b7d50d5c949733d77c42b4daf56ed1f97ed6954 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13mainboard/google/kahlee: Add Grunt variant frameworkMartin Roth
Update common files and add files for grunt to the variant directory. BUG=b:68293392 TEST=Build only Change-Id: I7b80e470058872d6613e66e64c8dd1494942e9b9 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13mainboard/google/kahlee: Add baseboard frameworkMartin Roth
BUG=b:68293392 TEST=Build only Change-Id: Ie4d039b4da10a992fc9dd2b0221fd4a1644aae6a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13amd/gardenia: Add globalnvs.aslMarc Jones
Stoney Ridge ASL uses global NVS for sharing data between ACPI and SMM. Change-Id: I8f497870844da1f56ff5c3b126d5613be36a9bfb Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-13google/chell: add missing SPD hex filesMatt DeVillier
Several SPD hex files for chell were missing from upstream coreboot (as compared to the Chromium tree/branch), which resulted in the incorrect type and amount of RAM being reported on chell boards with > 4GB RAM. Add these missing files and their Makefile entries. TEST: boot google/chell m7/16GB config and observe correct RAM type and amount reported via dmidecode and cbmem console log. Change-Id: I37d708c96e754b438e40fc413420aa64bf234c29 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22402 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-10google/kahlee: Use devicetree register values for UMAMarshall Dawson
Set the UMA memory size to 128 MiB. This value was empirically tested by AMD as the lowest value one could use. BUG=b:64927639 TEST=default, and 64, 128, 256, 384MB non-legacy configurations. Change-Id: I2bc808d8b402c3eb16a1a5962f3fa9d6b224cf52 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/21335 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-10google/kahlee: Add defines in OemCustomize.cMarshall Dawson
Add a #define for MB_DIMM_SLOTS and verify it doesn't exceed the max supported for the device. AGESA's DRAM procedures follow the BKDG and may vary depending on the number of slots on the motherboard. DIMM numbering and ordering is also affected by this value. Replace hardcoded integers with defined values for DIMM slots and number of channels. Change-Id: I4f7336da80b4e3d7f351502a63de0652e9ff5395 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21853 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-10google/kahlee: Move DRAM clear override to devicetreeMarshall Dawson
Kahlee needs to keep its DRAM contents after a reset. Move this override out of the OemCustomize.c file to a devicetree register setting. Change-Id: I3196cb8b94bec64e8ce59e4285cf8d97f442bd3d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/21858 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-10mainboard/google/coral: power off EN_PP3300_DX_LTE_SOC when entering S5Ben Chan
On Astronaunt, after the system enters the S5 power state, there is a 10-second timeout before the system transitions the power state from S5 to G3. The EN_PP3300_DX_LTE_SOC signal, which is controlled by GPIO_78 on the APL platform, remains on during that period. If the system is powered back on before going to G3, the built-in modem won't go through a power cycle as EN_PP3300_DX_LTE_SOC is never de-asserted. Keeping the modem, and indirectly the SIM, powered during a quick system power cycle may sometimes be undesirable. For instance, we would like a SIM with PIN lock enabled to require unlocking each time the system is powered on. After the SIM receives a PIN, it may remain unlocked until its next power cycle. Also, it is often desirable to power cycle the modem when the system goes through a power cycle. For instance, a user may power cycle the system to recover a wedged modem. BUG=b:68365029 TEST=Tested the following on an Astronaunt device: 1. Verify that the modem is powered on after the system boots from cold. 2. Suspend the system to S0ix. Verify that the modem remains powered on when the system is in S0ix. After the system goes back to S0, verify that the SIM with PIN lock enabled doesn't request unlocking, and the modem can quickly reconnect to a network. 3. Configure the system to suspend to S3 instead of S0ix, and then repeat (2). 4. Perform a quick system power cycle, verify that the modem is powered cycle and the SIM with PIN lock enabled requests unlocking. Change-Id: Ie60776d5d9ebc6a69aa9e360bd882f455265dfa2 Signed-off-by: Ben Chan <benchan@chromium.org> Reviewed-on: https://review.coreboot.org/22415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-09mainboard/google/zoombini: add dptf.asl and gpio.hNick Vaccaro
Add dptf.asl (copied from reef) to baseboard variant includes, instruct zoombini variant to use the baseboard's dptf.asl, instruct zoombini variant to use the baseboard's gpio.h. BUG=b:64395641 BRANCH=None TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: I9aa37f5afc35dab372917a4c84ff3121ec569546 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/22381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-09mainboard/google/zoombini: fix EC_SCI_GPI gpio defineNick Vaccaro
Change EC_SCI_GPI to GPE0_ESPI. BUG=b:69011806 BRANCH=master TEST=none Change-Id: I5d07bc0ef295d776635ff3a585c8de9028bd3f6a Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/22380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-09mb/google/{poppy,nautilus,soraka}: Disable deep S3Furquan Shaikh
Poppy and variants won't be using deep S3. This change disables deep S3 option in devicetree. BUG=b:69053636 Change-Id: I5fb4a6a0e4216a3648b5ed888f6dc6618f1a9fc4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22378 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-09mb/google/fizz: Enable NIC ledsGaggery Tsai
This patch enables customized NIC leds as follows: Green Orange (Amber) 100M off blinking 1000M on blinking BUG=b:65437780, b:68284778 TEST=Make sure the registers are programmed as expected and observe the LEDs are behaving as expected. Perform suspend/resume test and the LEDs are still working as expected. Change-Id: I9bb1367a4c742c2755d620e14ee6dfe70ee7f34b Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-09mainboard/google/kahlee: Move usb_oc.asl into variant/acpiMartin Roth
This compares to the acpi directory in other variants. BUG=b:68293392 TEST=Build and boot kahlee Change-Id: I05d402995b280d6f020bc2575063dbffefa30670 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-09mainboard/google/kahlee: Define MEM_CONFIG3 for Kahlee variantMartin Roth
Even though this GPIO isn't used for Kahlee, it needs to be defined so that the weak version of the variant_board_id() function can compile. BUG=b:68293392 TEST=Build and boot kahlee Change-Id: Ia8daf70fbafe02ec37c6b5eb8421cdb11de3be8b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08google/fizz: add VBOOT_PHYSICAL_REC_SWITCH configShelley Chen
Now that recovery button has been enabled through cr50, we can add VBOOT_PHYSICAL_REC_SWITCH config and treat the recovery button like on any other chromebox. BUG=b:37751915, b:63893483 BRANCH=None TEST=With DUT in normal mode, boot into recovery, press ctrl+d followed by pressing the recovery button. Should successfully boot into dev mode. CQ-DEPEND=CL:737477 Change-Id: I72fb42508083295e317dd06900796dc0cda753f6 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22368 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07mb/google/poppy/variants/nautilus: Enable Dialog DA7219 supportNaveen Manohar
Enable Dialog DA7219 codec i2c device and add required SSDT parameters BUG=b:68686020 TEST=With req'd driver support in kernel v4.4 verify audio on headset Change-Id: Ic815c929f29bec0d26a2981e9933b752c2d84c70 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Signed-off-by: Shruthi Sudhakar <shruthi.sudhakar@intel.com> Reviewed-on: https://review.coreboot.org/22264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-07mb/google/poppy/variants/nautilus: add nhlt supportNaveen Manohar
Nautilus board uses Dialog da7219 headset codec, Select the appropriate NHLT blob to be packaged in CBFS. Also generate the required ACPI NHLT table for codec and the supported topology in nautilus. Removes unwanted DMIC blob pick for nautilus BUG=b:68686020 TEST=With the required driver support in kernel verify that the Audio plays on headset and recording on headset mic Change-Id: I104889f54da1de38854bcb72aabbc88b739d6c09 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/22325 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-07intel/cannonlake_rvp: Clean up GPIO programmingLijian Zhao
Since we move from cannonlake U DDR 4 platform to cannonlake U LPDDR4 platform, it is also critical to revisit the GPIO settings as they are different. Remove unused GPIO setting for old platform, and clean up the native function definition. PAD_CFG_NF can only select NF1,NF2 ..., set to GPIO mode is illegal. TEST=Boot up in chromeos successfully. Change-Id: I0022b791bd8459ea2afdcd0241b603ce81408785 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2017-11-07src/mainboard/intel/glkrvp: Fix Lid switch supportShaunak Saha
SCI trigger logic had to be inverted. This patch enables the system to wake up from S3 when lid is opened when the system is in suspend state.We are trying to match what a external EC card running ChromeEC FW is sending on the signal. TEST = Verified that system wakes up from S3 on toggling lid switch back to open state. Change-Id: Ib42a38088ee028eddc6769921b0552c569da25a9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07mainboard/google/kahlee: Add MAINBOARD_FAMILYLann Martin
BUG=b:68865273 Change-Id: Ia2e9b10035e9dd502a563cdf8324ea8ea1922db3 Signed-off-by: Lann Martin <lannm@chromium.org> Reviewed-on: https://review.coreboot.org/22359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-07siemens/mc_apl1: Select CONFIG_NC_FPGA_NOTIFY_CB_READYMario Scheithauer
For internal measurements this mainboard needs a marking inside the NC FPGA when coreboot is ready and payload has been loaded. Change-Id: I37908b21e2a077dec7fa99b0db6d1fd9b6878341 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-07mainboard/intel/harcuvar: update to set the HSIO lines configurationJulien Viard de Galbert
Change-Id: Ifc3423ff983fb631edcab087d04742937b25ef86 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/22310 Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-07RISC-V boards: Stop using the config stringJonathan Neuschäfer
RISC-V is moving towards OpenFirmware-derived device trees, and the old functions to read the config string don't work anymore. Use dummy values for the memory base and size until we can query the device tree. Change-Id: Ice13feae4da2085ee56bac4ac2864268da18d8fe Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-06gru: Fix and export SPK_PA_EN GPIO for ScarletJulius Werner
On older Grus, GPIO0_A2 was an audio voltage rail enable line. On Scarlet, we instead moved the audio codec enable (previously on GPIO1_A2) there. Unfortunately the code still had some hardcoded leftovers that were overlooked in the initial port and make our speakers smell weird. This patch fixes the incorrect GPIO settings and adds the speaker enable pin to the GPIOs passed through the coreboot table, so that depthcharge doesn't have to keep its own definition of the pin which may go out of sync. Change-Id: I1ac70ee47ebf04b8b92ff17a46cbf5d839421a61 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Schneider <dnschneid@chromium.org> Reviewed-by: Alexandru Stan <amstan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-06intel/cannonlake_rvp: enable CNVi bluetoothBora Guvendik
Enable USB2 port 10 for CNVi bluetooth. TEST=Boot to OS, verify bluetooth functionality. Change-Id: I5f2390c149bf0de911efac09f54ccd641f51bbcd Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-11-06mainboard/google/coral: Override VBT selection for astronautren kuo
Current VBT setting for T8 is only 1ms which is under Innolux N116BCA-EA1 panel's spec. Modify T8 to 100ms. (Innolux's panel's spec requires T8 needs to be greater than 80ms) CQ-DEPEND=CL:*496012 BUG=b:67756548 BRANCH=master TEST=emerge-coral depthcharge coreboot chromeos-bootimage Run on DUT and check panel sequence meets spec. Change-Id: I580567decfccd78366c37181255015ac2cd76493 Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Reviewed-on: https://review.coreboot.org/22306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quantatw.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-04mainboard/google/kahlee: remove unused FILECODE macroAaron Durbin
From what I can tell FILECODE isn't used at all in this file. Remove it. Change-Id: Ie88140e63a4917f470f42119c1fe4e8c7d2584ca Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-04src/mainboard/glkrvp: Fix ec_in_rw and wpShaunak Saha
Change-Id: I513b26d39973d9714b531d1ab0755c66d19eb332 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04asus/p2b: Move to EARLY_CBMEM_INITKeith Hui
Change-Id: I0bf4d6318ade6e931db4f8b1af08db1f9f93c313 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/22228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-11-03mainboard/intel/cannonlake_rvp: enable SD cardBora Guvendik
Set SCS SD enable FSP parameter and set card detect gpio information. Change-Id: Ic99466c0d2d59070418d765442ff6d217023803b Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03soraka: update pad reset config of WLAN_PE_RST to RSMRSTDivya Chellap
In skylake based platforms, setting GPIO pad reset config to DEEP will reset the gpio configuration across warm reset, set it to RSMRST to preserve the configuration across warm resets. Also, moving the configuration from early to late as appropriate. BUG=b:64386481 BRANCH=none TEST= WiFi functionality across S3, DeepS3, S0ix and warm/cold reboot. Change-Id: I38940b7c7d71e60bf0e51d6978a00be148ad61bc Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-03google/reks: override USB2 Phy settings on BSW D-Stepping SOCMatt DeVillier
Adapted from Chromium commit 12ad5b5: Reks : override USB2 Phy settings... Base on Intel recommendation, override following settings for USB2 port 1/2/3 on BSW D-stepping SOC. 1. Set USB[1] register for right side to 7321 2. Set USB[2] register for left side to 7021 3. Set USB[3] register for CCD to 7021 Original-Change-Id: I04240a010e875f29c47f4fea83ff918f180b0273 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Keith Tzeng <keith.tzeng@quantatw.com> Change-Id: Iabd6312576e9897315c4e4dbf19341380d9d1414 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03google/reks: override RX ODT limit, RAM geometry if neededMatt DeVillier
Adapted from Chromium commit 6ee6f3d: Reks: To set the RX ODT limit... Override RX ODT and DRAM geometry for Micron part MT52L256M32D1PF-107. Use get_ramid() to determine if override is necessary. Original-Change-Id: I41f3aba030a00152e1217533ef953338ac396605 Original-Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Original-Reviewed-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Keith Tzeng <keith.tzeng@quantatw.com> Change-Id: Iea8c3c67e5afb21285dc15ad665474ad5f192423 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03google/kahlee/acpi: Serialize method _CRSPaul Menzel
ASL+ Optimizing Compiler/Disassembler version 20170831 shows the remark below. ``` dsdt.aml 87: Method (_CRS, 0x0, NotSerialized) Remark 2120 - ^ Control Method should be made Serialized \ (due to creation of named objects within) ``` So, serialize the method. Fixes: commit 4a51ea8470 (google/kahlee: Add ASL for Elan touchpad) Change-Id: I664f493318cbfd80d91565c0d29ec918278c4906 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/21901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-03mainboard/google/kahlee: Prepare for variantsMartin Roth
Move files that are particularly specific to the mainboard into the variant directory. Files that only have small areas of mainboard specific pieces use #if to separate between the boards. Add memory.c to split out the variant board id into a weak function. Add baseboard/gpio.h to satisfy the build - this will be updated in the next commit. BUG=b:68293392 Change-Id: I7c1beb45f571f2547f3b5b0d7ec78923d0cec761 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03siemens/mc_apl1: Enable I2C0 with 100kHzMario Scheithauer
The default setting for I2Cx is 400kHz. On this mainboard there is a device on I2C0 which requires a lower clock rate to work correctly. For this reason we set the frequency to 100kHz. Change-Id: I637a58a0c89ead55ca1176d6aecdfaba5897d64f Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-03siemens/mc_apl1: Set coreboot ready LEDMario Scheithauer
This mainboard has its own coreboot ready LED. The LED is switched on via GPIO CNV_RGI_DT. Change-Id: I179d013746c1334337dc9e6b7f09ac54eff0cd77 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-11-03siemens/mc_apl1: Add legacy IRQ routing for PCI devicesMario Scheithauer
On this mainboard there are PCI devices, which are connected to the PCIe root port via a PCIe-2-PCI bridge. One of the devices only supports legacy interrupt routing. For this reason we have to adjust the PIR6 register (0x314c) which is responsible for PCIe device 13h and 14h. This means that the interrupt routing will also be the same for both PCIe devices. The bridge is connected to PCIe root port 4 (Device 14.0). The following routing is required: INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#->PIRQA# Change-Id: I5464c9a2669773bc1e6cd4b4d29d1be838dbfa27 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-11-03google/nautilus: enable elan touchpad supportChris Wang
add elan touchpad in devicetree. BRANCH=master BUG=b:66462881 TEST=emerge-nautilus coreboot Change-Id: I30e6797ef06351690ff0b5c78ea76918547167a7 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-03google/nautilus: Update GPIO tableChris Wang
Update GPIO settings to meet nautilus's schematic design. BRANCH=master BUG=b:66462881 TEST=emerge-nautilus coreboot Change-Id: I11930df62130431764702371a3ba84949a65ba30 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: shkim <sh_.kim@samsung.com>
2017-11-03google/nautilus: add spd data by ram idChris Wang
update with nautilus memory spds. RAM_ID = 0 => K4E8E324EB-EGCF RAM_ID = 1 => K4E6E304EB-EGCF RAM_ID = 2 => K4EBE304EB-EGCG BRANCH=master BUG=b:66462881 TEST=emerge-nautilus coreboot Change-Id: I29d8a76b170aee64bb0125276df0e4709012daba Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: shkim <sh_.kim@samsung.com>
2017-11-02mainboard/google/coral: Override VBT selection for santaTim Chen
Current VBT setting for T8 is only 1ms which is under Innolux N116BCA-EA1 panel's spec. Modify T8 to 100ms. (Innolux's panel's spec requires T8 needs to be greater than 80ms) BUG=b:67756548 BRANCH=master TEST=emerge-coral depthcharge coreboot chromeos-bootimage Run on DUT and check panel sequence meets spec. CQ-DEPEND=CL:*493633 Change-Id: I7934b0f6d40b15796c55d360995c5eb0c5049222 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/22294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-01intel/cannonlake_rvp: enable CNVi wifiBora Guvendik
Leaving the wifi related gpios unmodified for now due to FSP problem. If H0-H3 is configured as native mode and GPIORXDIS, GPIOTXDIS bits in DW0 are cleared, it causes FSP to assert when wifi module is attached. coreboot gpio macros clears these 2 bits because they are suppose to be "don't care" in native mode. TEST=Boot to OS and verify wifi Change-Id: Ica5e1c43802d04a9471cdfa0087e86f669122fff Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22094 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-01google/fizz: enable SPD read by wordKane Chen
This is to enable SPD word access to reduce boot time. It can save 80 ~ 100 ms per DIMM. BUG=b:67021853 BRANCH=None TEST=system boot, and boot time is reduced Change-Id: Ic527a539ed634e15b939b18fff4b4e08ebb3ec57 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/22267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-01mainboard/google/coral: Update touchscreen device ACPI nodesSheng-Liang Pan
For Raydium, export reset GPIO as well as PowerResource. Let EN_PP3300_TOUCHSCREEN signal will goes to low at S3 mode. BUG=b:67879912 BRANCH=coral TEST=emerge-coral coreboot Change-Id: Ibf501b40ecfc957fd8be7ebffd2357dfa0e07757 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/22252 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-31mainboard/google/snappy: Update touchscreen device ACPI nodesKevin Chiu
For MELFAS/Raydium, export reset GPIO as well as PowerResource BUG=b:68141940 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I1915ff8207502b80ecba6b63ce2ce1b866faf4c4 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/22146 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-31AMD boards: Fix function name (soft_reset) in messageJonathan Neuschäfer
Change-Id: Ia21a3e93712bd6b6780fe7308c6cf79c553f4e1b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-10-28mainboard/google/Kahlee: Combine BiosCallOuts filesMartin Roth
There's no need to have these separated. BUG=b:64932381 Test=Build & Boot Change-Id: I22898d3bf95d5e9a8fc2643bfccae1e2f5b29e44 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-26purism/librem_skl: add new variant Librem 15 v3Matt DeVillier
Add new board librem15v3 as a variant of the librem_skl baseboard. Changes from the librem13v2: - Change board name and version - Change GPIO A18, A19, A20, D9, D10 and D11 from NC to GPIO - Enable PCI device 1c.4 - Change USB port definitions in devicetree TEST: build w/SeaBIOS, boot PureOS on Librem 15 v3 hardware Change-Id: I7c762a34f5b961c908e4a29ec331da4b0dea9986 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22048 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-26purism/librem13v2: convert to variant setupMatt DeVillier
Convert the Purism Librem13v2 board to a variant setup, in preparation of adding the librem15v3 as a new variant. The 13v2 and 15v3 are nearly identical, so this minimizes new code to add support for the latter. Change-Id: I5d648cdb8f63c03de5474253203b3d0853673294 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22047 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-24mainboard/intel/cannonlake_rvp: Enable variant gpio configurationJohn Zhao
This patch refers to variant_gpio_table for board gpio configuration. Change-Id: If5b4c20ceccb32fc1ab4246482d8fecb491777c4 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2017-10-23mb/sapphire/pureplatinumh61: Remove S3 resume delayNicola Corna
It seems that recent changes in coreboot have fixed the raminit issues on this board; the workaround of 10 ms delay after the S3 resume is not needed anymore and can be removed. Change-Id: If8fb97ecf3eb797f53270a053201fafd32031678 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/21485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-23purism/librem13v2: migrate from FSP 1.1 to 2.0Matt DeVillier
Migrate the Librem13v2 from using FSP 1.1 to the public/GitHub FSP 2.0 Skylake/Kabylake release: - select FSP 2.0 in Kconfig - adjust romstage/ramstage functions as required - refactor pei_data functions - remove VR_RING domain from devicetree (unsupported in FSP 2.0) - add SataSpeedLimit parameter to work around power-related issue when operating at SATA 6.0Gbps speed TEST: build/boot Librem13v2, observe successful boot, lack of SATA-related errors in dmesg. Change-Id: Iedcc18d7279409ccd36deb0001567b0aa5197adf Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-23mainboard/google/coral: Add USB2 phy setting override for Astronautren kuo
In order to pass type C USB2 eye diagram for sku Astronaut, USB2 port#1 PHY register needs to be overridden. sku ID:0,1 Astronaut (USB) port#1: PERPORTPETXISET = 7 PERPORTTXISET = 2 sku ID:61,62 Astronaut (LTE) port#1: PERPORTPETXISET = 7 PERPORTTXISET = 5 BUG=b:68120012 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: Icf5c9e5f4dae15630ec4d6ca6648cae78ca910c6 Signed-off-by: Ren Kuo <ren.kuo@quantatw.com> Reviewed-on: https://review.coreboot.org/22135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-22superio/ite/common: Add temperature offsetVagiz Trakhanov
Add a devicetree option to set temperature adjustment registers required for thermal diode sensors and PECI. However, this commit does not have the code needed to make PECI interface actually use these registers. It only applies to diodes. As a temporary workaround, one can set both THERMAL_DIODE and peci_tmpin to the same TMPIN, e.g. TMPIN3.mode="THERMAL_DIODE" and peci_tmpin="3". PECI, apparently, takes precedence over diode, so the adjustment register will be set and PECI activated. Or simply use the followup patch, which makes THERMAL_PECI a mode like THERMAL_DIODE. I don't have hardware to test THERMAL_DIODE mode, but in case of PECI, without this patch I had about -60°C on idle. Now, with offset 97, which was taken from vendor bios, PECI readings became reasonable 35°C. TEST=Set a temperature offset, then ensure that the value you set is reflected in /sys/class/hwmon/hwmon*/temp[1-3]_offset Change-Id: Ibce6809ca86b6c7c0c696676e309665fc57965d4 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-22security/vboot: Move vboot2 to security kconfig sectionPhilipp Deppenwiese
This commit just moves the vboot sources into the security directory and fixes kconfig/makefile paths. Fix vboot2 headers Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-22purism/librem13v2: Update microcode length in CBFSYouness Alaoui
Microcode blob has been updated, so update the length to match Change-Id: I46ac10e5c6cd6492c98a7034649797f301101abc Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-22purism/librem13v2: Fix USB settings and set OC pinYouness Alaoui
The USB settings were wrong in some places, or missing and the USB_OC values were taken from the schematics. Change-Id: I29b564a4161c486f5e8556b1726471bfa2351b7a Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-22purism/librem13v2: Update devicetree settingsYouness Alaoui
Disable SataDevSlp and update other values to match vendor/AMI firmware. Change-Id: I6f278be54b86450575c366d68bfa6a67575b0fdd Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-22purism/librem13v2: Change DRAM Rcomp/DQS valuesYouness Alaoui
The RComp values have been updated to match what is shown in the schematics. Extracting the Memory configuration blob from the original BIOS (A blob which contains the correct binary sequence matching the RComp values appears in object with GUID 2D27C618-7DCD-41F5-BB10-21166BE7E143), I could find and confirm the DQ and DQS mapping. Small code cleaning in romstage.c with no effect. Change-Id: I35c734269b365fd759e9bd56224a80a8a8df5a57 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2017-10-22purism/librem13v2: Add reading of serial number from CBFSYouness Alaoui
Check CBFS for 'serial_number' field, and use value if exists; otherwise use value set at compile time. Change-Id: I4b50f6310ca32b9dd372db075a5b5729e3b06619 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22040 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-22google/kahlee: Add PSP to devicetree.cbMarshall Dawson
Add the missing device and ensure it shows up in the devicetree prior to PCI enumeration. Change-Id: Ia2c4ba1200422b36c533e86065a4fcd10c4b2722 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22055 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-22amd/gardenia: Add PSP to devicetree.cbMarshall Dawson
Add the missing device and ensure it shows up in the devicetree prior to PCI enumeration. Change-Id: I44c7df6a2be149ed61094f67ef1c578736e5b55c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-22mb/google/link: Enable libgfxinitNico Huber
Beside the high-resolution eDP panel, it features a dual-mode mini-DP port. Change-Id: Iae60c1f930f5778ee3b5d9d19227168257e9ae06 Tested-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2017-10-20kahlee: Set Kahlee GPEsMarc Jones
Add GPE configuration table. Remove GPE3 from the power button ASL and set the EC to GPE3(AGPIO22). Set the EC and PCIE/WLAN SCI GPIO signals. Set GPE ASL methods for: PCIE/WLAN 8h EHCI 18h XHCI 1fh Note EC GPE3 methods are in the EC ASL. BUG=b:63268311 BRANCH=none TEST=Test lidswitch powers the device on and off at the login screen. Change-Id: I27c880ee84b6797d999d4d5951602b654ede948e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22096 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-20google/fizz: Set PL2 value based on sku id/charge max powerShelley Chen
Set PL2 based on either 90% of usb c charger's max power or sku id if using a barrel jack. BUG=b:37473486 BRANCH=None TEST=output debug info for different skus and make sure PL2 set correctly. Change-Id: I487fce4a5d0825a26488e71dee02400dbebbffb3 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/21772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20stoneyridge: Fix USB ASLMarc Jones
Stoney Ridge has one EHCI controller and one XHCI controller. Also, update the Kahlee and Gardenia mainboards ASL to match. Change-Id: I5749ca0640796732e74e551147f8c4446317b77e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20intel/cannonlake_rvp: Update board nameLijian Zhao
Change the board name from cannonlake U DDR4 to U LPDDR4 to match actual platform. TEST=NONE Change-Id: Id350e3cbc299d49431197ef5f914ea9a7310a0a5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-10-20soc/intel/cannonlake: Add platform.aslLijian Zhao
Include common platform.asl to have generic indication of power transition state of system. TEST=Enter and resume from S3, check the post code had been changed to 0096 and 0097. Change-Id: Ic38ac6d7e60441caeba5c088c9dbe4d901355782 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22111 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-10-20Stoney Ridge Platforms: cast AGESA tables to void *Martin Roth
In the original AGESA headers, these tables are not defined as const. Cast them to void * so that they'll work with either version of the headers. BUG=b:64766233 TEST=Build in cros tree and upstream coreboot, with old headers and updated headers. Change-Id: I75387b57caf5a3c6c25655120aafd942254b5c73 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22059 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-20Stoney Ridge Platforms: Make AGESA callout tables commonMartin Roth
There was no reason to have the AGESA callout tables in each mainboard, so move them to soc/amd/common. Move chip specific functions into the stoneyridge directory: - agesa_fch_initreset - agesa_fch_initenv - agesa_ReadSpd Combine agesa_ReadSpd and agesa_ReadSpd_from_cbfs, and figure out which to use. Soldered-down memory still needs to be supported in a future commit, as stoney supports both DDR3 & DDR4. A bug has been filed for support for the upcoming Grunt platform. BUG=b:67209686 TEST=Build and boot on Kahlee Change-Id: Ife9bd90be9eb0ce0a7ce41d75cfef979b11e640b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-20mainboard/pcengines/apu2: add apu3 and apu5 variantsKamil Wcislo
Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-19siemens/mc_bdx1: Initialize GPIOsWerner Zeh
Add GPIO initialization for mc_bdx1 mainboard. Call init_gpios() as early as possible as FSP will set up things (like hiding PCI devices) rather early. If connections on the mainboard are dependent on GPIO settings then FSP can screw things up (e.g. disabling not yet connected PCI root ports). Change-Id: I003277cfb871f861900b7fcdc5ec851d4c1c1e6a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/22035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19AGESA f14: Fix DDI maps in OemCustomize.cKyösti Mälkki
Creates identical object files. Change-Id: Ie8adb21a753cee6a72dae5eeb64a255e6ead2fe7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-19AGESA: Split long lines in OemCustomize.cKyösti Mälkki
Change-Id: I907f55622e6aaba401471239f706ab24cd26319f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-19AGESA f14: Drop PlatformGnbPcieComplex.hKyösti Mälkki
These were OEM configurations hidden inside a header file, notation was already dropped for f15tb and f16kb. Change-Id: Id64fa861fd516e9f7cae9eba9b8145e033fe9bdd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-19pcengines/apu2: Add timestamps to romstageMichał Żygowski
This change adds timestamps to romstage in order to keep PC Engines apu2 platform in active codebase. Change-Id: Ie0286d4982623da9d035c47df6077edaf51e5110 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/22071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-19mb/google/poppy: Log EC events during S0ix resumeFurquan Shaikh
This change adds support for logging EC events during S0ix resume. BUG=b:67874513 TEST=Verified that EC events are correctly logged during S0ix resume: 284 | 2017-10-16 20:45:12 | S0ix Enter 285 | 2017-10-16 20:45:16 | S0ix Exit 286 | 2017-10-16 20:45:16 | Wake Source | Power Button | 0 287 | 2017-10-16 20:45:16 | EC Event | Power Button 288 | 2017-10-16 20:45:35 | S0ix Enter 289 | 2017-10-16 20:45:40 | S0ix Exit 290 | 2017-10-16 20:45:40 | Wake Source | GPIO | 112 291 | 2017-10-16 20:45:40 | EC Event | Lid Open 292 | 2017-10-16 20:50:51 | S0ix Enter 293 | 2017-10-16 20:50:59 | S0ix Exit 294 | 2017-10-16 20:50:59 | Wake Source | GPIO | 112 295 | 2017-10-16 20:50:59 | EC Event | Mode change Change-Id: I9f6dcb8852d94ebf90bb5b63a17fde524d58d49f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18mainboard/intel/cannonlake_rvp: Enable hardware P state controlVaibhav Shankar
This patch provides configuration parameter to enable/disable Intel Speed Shift Technology. Change-Id: I95a240e8be6e19ac0e14698ab33543c491a8c974 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/22049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-18intel/cannonlake_rvp: Enable Audio DSPLijian Zhao
Enable Audio DSP by default on cannonlake rvp platform. TEST=Boot up into OS and check Audio driver debug print. Change-Id: I6892c6d349019550c967ef30b84d385f396fc388 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18intel/cannonlake_rvp: Declare PCIE clock usageLijian Zhao
Define PCI express clock usage for cannonlake u and cannonlake y rvp based on board design. TEST=Bootable into OS. Change-Id: I7d71d9a87d87ce6a3e3270f67518afdd54a48db4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18google/snappy: Override USB2 strength by SKUIDKevin Chiu
14" BigDaddy needs to override USB2 TxiSet additionally to enhance driving strength. Otherwise EA test will fail on USB2 eye pattern. BUG=b:67820719 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I674c121a71866a5d44439eeb49e07f917d816de8 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/22037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 12:40:15 +0000