summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-04-29soc/intel/braswell: Move LPE ACPI code to mainboardFrans Hendriks
The ACPI code of LPE device is included regardless of the availability of the LPE controller. Linux remains requesting the status of device LPEA even if this device is disabled. Include ACPI LPE controller code at Braswell mainboards with LPE enabled. BUG=N/A TEST=Linux 4.17+ on Portwell PQ7-M107 Change-Id: Ic8acf9ea9e9b0ba9b272e20beb2023b7a4716a73 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-04-29mb/google/hatch/variants/baseboard: remove unused dqs_mapPaul Fagerburg
The dqs_map array is used only for LPDDR3 and LPDDR4. It is not used for DDR4, and so it can be removed from the baseboard memory initialization code. BRANCH=none BUG=b:129706819 TEST=ensure the firmware builds without error; I don't have hardware available to test this just yet. Change-Id: I07fac3097d68f37b4630d3f0010f987da2f03bd7 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32484 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29mb/google/hatch/variants/kohaku: Add support for LPDDR3 configurationsPaul Fagerburg
First configuration supported is 8 GB system memory: 4 x 2 GB (K4E6E304ED-EGCG). BRANCH=none BUG=b:129706819 TEST=ensure the firmware builds without error; I don't have hardware available to test this just yet. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: Ibd92d585118ff75492e8a7188dcdb2a286836d56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-28mb/ocp/monolake: add TPM and IPMI supportLukasz Siudut
Changes includes: - enable TPM1 + add entry in devicetree - configure LPC IO to make IPMI work + add entry in devicetree - introduce DSDT and SMBIOS entries for IPMI to make it detectable by ipmi_si driver Signed-off-by: Lukasz Siudut <lsiudut@fb.com> Change-Id: Ia975643064075f1f861f4ead6f24ed71f345ea04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-04-26mb/google/sarien: Enable LTR for PCIe NVMe root portDuncan Laurie
Enable LTR for NVMe so it can use ASPM L1.2. BUG=b:127593309 TEST=build and boot on sarien and check L1 substate with lspci before: L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+ after: L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ Change-Id: I9842beda6767f758556747f83cfcedbd00612698 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com>
2019-04-26Revert "mb/google/arcada: Add settings for noise mitgation"Duncan Laurie
This reverts commit 77fb3632a4a3d3004b3aa4950967be9164d9711d. Reason for revert: This change inadvertently added a submodule. Change-Id: I6cc2a3cd9d88986a2599a5ff2e5a066b1396a8c0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32472 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-26mb/google/poppy/variants/atlas: Revise AC/DC loadlineGaggery Tsai
This patch revises the AC/DC loadline settings because some major layout changes between proto and evt boards. BUG=b:130740639 BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage and boot to the OS. Change-Id: Iea12c621e7fab427a0de8f43f0290bf01d0c5a09 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Caveh Jalali <caveh@google.com>
2019-04-25mb/google/hatch/: FPMCU not rebooted when DUT rebootsTim Wawrzynczak
Add FP_RST_ODL to early GPIO table, configured as low, so that the FPMCU will get reset when coreboot enters bootblock. BUG=b:130229952 BRANCH=none TEST=Compiles (no Hatch device w/FP to test) Change-Id: I8a8d8cc2c560f6518337f7500575fdc2265b6347 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-04-25mb/supermicro/x10slm-f: Do SIO setup in bootblockTristan Corrick
Lynx Point switched to doing mainboard-specific super I/O setup in the bootblock with commit d893a2635fdd ("sb/intel/lynxpoint: Enable LPC/SIO setup in bootblock"). The X10SLM+-F was added while that commit was in review, and hence did not receive the necessary changes to SIO setup. This patch has not been tested on hardware. Change-Id: I7a648ec967dea2113cbbde1a93c1963ca6dd3c88 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-04-25mb/google/hatch: Pull up GPP_C13 for hatch and hatch_whlPhilip Chen
On EC end, we want to change this pin from push-pull to open-drain. And since there is no external pull-up resistor on the board, we'll have to configure this pin as internal-pull-up on AP end. BUG=b:129306003 TEST=None Change-Id: Ibc1f89fc25773220db009c6571400b01390dd756 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-24mb/google/kohaku: Update overridetree.cbTim Wawrzynczak
Add common SoC config. Disable PCIe WiFi. Add digitizer. Turn off native SD card interface. No WWAN. Add DA7219 driver to Kconfig. BUG=b:130310626 BRANCH=none TEST=compiles (no Hatch ref or Kohaku device to test) Change-Id: I17d5ba6ce4ec412384e4a1678474b8d26499ba40 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-24mb/google/hatch: Move SD card detect GPIO.Tim Wawrzynczak
Not all Hatch variants utilize the SoC's native SD card support. Move the support to board-specific variants instead of the base device tree. BUG=none BRANCH=none TEST=compiles (no Hatch device to test with) Change-Id: Iae24114aad2c4d042c25da6f8cb740ccc8960082 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32417 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-24mb/google/hatch/var/kohaku: Skip UART0 config in FSPFurquan Shaikh
Similar to hatch(CB:32278), this change sets SerialIo config for UART0 to PchSerialIoSkipInit to skip initialization in FSP. This change also adds a device to kohaku override tree to ensure that the settings in it take effect. BUG=b:130310626 Change-Id: Ia25b45811be26d55fc0019e4cd22eb7310b5a4c4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-24mb/google/arcada: Add settings for noise mitgationNathan_chen
Enable acoustic noise mitgation for arcada platform, the slow slew rates for Ia and Gt are fast time dived by 8. BUG=b:131144464 TEST=waveform test and hardware validation result pass. Signed-off-by: nathan chen <nathan_chen@wistron.corp-partner.google.com> Change-Id: I37315ecfa245fce3085e62d1566ff037d8aa8ab4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32403 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-24mb/google/sarien: Disable POWER_OFF_ON_CR50_UPDATEKeith Short
Disable the POWER_OFF_ON_CR50_UPDATE option on sarien/arcada. This is needed so that platform properly boots after doing a Cr50 firmware update when running on battery. BUG=b:126632503 BRANCH=none TEST=Build coreboot on sarien/arcada. TEST=Perform Cr50 firmware update on Sarien, confirm the platform boots normally after sending TURN_UPDATE_ON to the Cr50. Change-Id: I0b687285eb95070eaffb68611a7d98eb8434ce2c Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-24mb/google/sarien: Add power control for Sarien touchscreenEric Lai
This change will save touchscreen power leakage 2-3mW in S0iX and increase T2 display time delay to meet display panel requirement. BUG=b:129899315 TEST= Measure touchscreen power from Sarien during S0iX Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I48419132ba734f20ad5cf484c2dda609570a6dd0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32330 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-24mb/google/sarien: Remove touch VPD support and Melfas HID touchEric Lai
Sarien will change Melfas from HID to I2C and change address from 0x10 to 0x34. So we don't need VPD to separate Elan and Melfas anymore. BUG=b:131194574 TEST=boot up and check no Melfas HID device exist Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic002f61b226743e1c18dbdbc51ce8b733916d8a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32437 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-24mb/google/sarien: Disable touch by strap pin GPP_B4Eric Lai
We want to disable touch for non-touch sku. We can use strap pin GPP_B4 to identify it is connected with touch or not. touch sku: GPP_B4 is low non-touch sku: GPP_B4 is high BUG=b:131132419 TEST=boot up and check no touch device exist Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If6681262c25e4b01e061a8520e38905d40345509 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32438 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-24mb/google/sarien: Toggle SSD reset pin on DVT2Lijian Zhao
SSD reset pin had been added on DVT2, the power sequnence requires toggle in boot stage. BUG=b:130741066 TEST=Boot up with simulated DVT2 platform and confirm SSD can be detected during warm reboot. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ie734875a49b8b61f8b813c473d30cbcaf4dd13d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32434 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-24mb/google/octopus: I2C clock tuning for bloogTony Huang
Tune I2C params for I2C buses 5, 6, and 7 to ensure that the frequency does not exceed 400KHz. BUG=b:131132499, b:128998988 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage and measured frequency under 400 KHz Change-Id: Ie8cfba72a0654402ccb0274c00b44fbfa2deea21 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-23mb/google/octopus/variants/bloog: Add goodix touchscreen supportTony Huang
Add goodix touchscreen support BUG=b:131082228 BRANCH=octopus TEST=emerge-octopus coreboot and verify that touchscreen works on bloog. Change-Id: I0b3b481ca806b6452d67ace5dfe53f12a14ac3be Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-04-23sb/intel/lynxpoint: Enable LPC/SIO setup in bootblockArthur Heymans
This allows for serial console during the bootblock and enables console in general for the bootblock. Change-Id: I5c6e107c267a7acb5bf9cbeb54eb5361af3b6db4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30315 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23mb/google/sarein: Add power control for Arcada touchscreenRoy Mingi Park
This change will save touchscreen power leakage 2-3mW in S0iX and increase T2 display time delay to meet display panel requirement. BUG=b:129899315 TEST= Measure touchscreen power from Arcada during S0iX Change-Id: I4b8f3fdc0d107b080c5febe6fa5d29ea5d1ed0fc Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-04-23nb/intel/sandybridge: Drop pch.h from sandybridge.hPatrick Rudolph
Include pch.h in the source files instead in sandybridge.h. Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to OS, no errors visible in dmesg. Change-Id: I9e5b678e979a8d136d8d00b49486d0a882f77d81 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-04-23src: include <assert.h> when appropriateElyes HAOUAS
Change-Id: Ib843eb7144b7dc2932931b9e8f3f1d816bcc1e1a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: David Guckian
2019-04-23src: Use include <console/console.h> when appropriateElyes HAOUAS
Change-Id: Iddba5b03fc554a6edc4b26458d834e47958a6b08 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-23src: Add missing include 'console.h'Elyes HAOUAS
Change-Id: Ie21c390ab04adb5b05d5f9760d227d2a175ccb56 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-04-23src/mainboard/{foxconn/d41s,intel/d510mo}: Use pci_or_configArthur Heymans
The pci_or_configx function makes the code shorter and more readable. Change-Id: Ic1ba250f8ac9fb75cf3252aec18af80842bda7dd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-04-23mb/google/octopus: Add keyboard backlight support for Droid/BlorbSheng-Liang Pan
Droid/Blorb supports keyboard backlight feature, so enable the ASL code. BUG=b:130330141 BRANCH=octopus TEST=Build and boot to OS, verify that the string 'KBLT' is in the DSDT. Change-Id: I74684e3905d34b61fa4b851798dbca018f986e5a Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-22board/kukui: Support ADC value for NCHung-Te Lin
When the components like LCM ID are not installed (i.e., NC), ADC will return some value with much larger variation from standard value (out of the tolerance we set). To support that, we should check tolerance only on non-NC voltages. Also improve the error messages so we can see the ADC raw values instead of simple assertion error (which makes debugging more difficult since we have to build another firmware image just to print the values). BUG=None TEST=Booted on Kukui and got correct SKU ID for NC LCMID. BRANCH=None Change-Id: I8d00956e0e3b48ddbcaa505dd3ade24720c3b4ad Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32353 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-22mb/google/sarien: Configure both GPP_H12 and GPP_H13 for SSD on ArcadaRoy Mingi Park
Currently, Arcada only supports D3hot during S0iX and there is leakage power around 5~10mW depending on SSD vendors. To support D3cold for SSD during S0iX, one MOSFET will be added on DVT2 and two GPIOs are required to be configured. GPP_H13 is to control SSD_SCP_PWR_EN(power enable) and GPP_H12 is to control SSD reset. BUG=b:130741066 TEST=Measure SSD power during S0iX from Arcada(DVT2) Change-Id: I868590e9e85d5df07930a3681884e3fc3a5c4d50 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32361 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-21nb/intel/haswell: Add an option for where verstage startsArthur Heymans
Previously Haswell used a romcc bootblock and starting verstage in romstage was madatory but with C_ENVIRONMENT_BOOTBLOCK it is also possible to have a separate verstage. This selects using a separate verstage by default but still keeps the option around to use verstage in romstage. Also make sure mrc.bin is only added to the COREBOOT fmap region as it requires to be run at a specific offset. This means that coreboot will have to jump from a RW region to the RO region for that binary and back to that RW region after that binary is done initializing the memory. Change-Id: I3b7b29f4a24c0fb830ff76fe31a35b6afcae4e67 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26926 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-20mb/facebook/watson: Don't use deprecated IS_ENABLEDElyes HAOUAS
Change-Id: Ia4b7311f30f8ec951d02d3c31c30cf8895ed0eb2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-20mb/google/octopus/variants/baseboard: Disable unused I2C 1Tony Huang
I2C 1 is not being used in any of the octopus variants, so disable it. BUG=none BRANCH=octopus TEST=Verify on meep and bloog reboot and s0ix suspend successfully Change-Id: I7ed5065cfd0b9780d13feb27cc78b8090d7a03a6 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-04-20mb/google/arcada: Set psys_pmax to 140WNathan_chen
arcada is designed to operate at max power of 140 Watt. Hence set psys_max to 140W. BUG=b:124792558 TEST=Build and boot arcada. Change-Id: I280dfb81b3e25c7619a68db487e2b18867f52fda Signed-off-by: nathan chen <nathan_chen@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-04-19src/mb/Kconfig: Fix PCI subsystem IDsElyes HAOUAS
References to MAINBOARD_PCI_SUBSYSTEM_{DEVICE_ID,VENDOR_ID} were removed in commits dbd3132 sb/intel/{i82801g/i/j,bd82x6x}: Make use of generic set_subsystem() 00bb441 sb/intel/lynxpoint: Remove PCI bridge function Change-Id: I72bba8406eea4a264e36cc9bcf467cf5cfbed379 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32107 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-19kohaku: mb/hatch/gpio: Scrub Kohaku GPIOs.Tim Wawrzynczak
Ensure Kohaku GPIO pins are configured correctly w/r/t Hatch. Implement the base/override model for GPIOs (regular and early). The 'hatch' baseboard contains the base GPIOs, and variants can override individual pads. BUG=b:129707481 BRANCH=none TEST=Compiles for all variants. Change-Id: Ie5c83a0538d367ea11e9499f21cea41891d7a78e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-19mb/google/sarien: Update SMBIOS type17Lijian Zhao
Match SMBIOS type 17 device locator with motherboard silk screen,using "DIMM-A" and "DIMM-B" instead of "Channel-0-DIMM-0" and "Chaneel-1-DIMM-0". TEST=Boot up with sarien platform and run dmidecode to check SMBIOS type 17 have expected output. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ie2125c0381bd24d96f725f68cde93a53da8c94c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-19mb/google/sarien: Update GPIO GPP_C23 settingLijian Zhao
GPIO pin GPP_C23 is used as level trigger but not edge trigger, also it is not inverted, correct it here. According to board schematic, GPP_C23 connected with 3.3v pull up, so the pin is low active. BUG=b:128554235 TEST=Boot up arcada platform with stylus keep on touching the screen, the touch screen is still functional once in OS stage. Without change, touch screen is not functional at same scenario. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I2bee664198057e3997dda181a16b9a0388067036 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32347 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-18mb/google/sarien: Enable board_id featureDuncan Laurie
Enable the Kconfig option to automatically read the board ID and populate it into the SMBIOS tables. BUG=b:123261132 TEST=verify current board id from the OS: cat /sys/class/dmi/id/board_version rev1 Change-Id: Id41631bfaa627ca9d5034e2ebe93f8ace2ffdad8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32277 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-18mb/google/octopus: Set default configuration to low for gpio_178Wisley Chen
Set default configuration to low for gpio_178, and can remove the override setting for bobba/bloog/fleex/meep/phaser. For ampton, Change-Id I64a67f73564188ad0548a1a770169ef2bca47453 ( mb/google/ampton: Fix polarity of EN_PP3300_WLAN_L signal.) modified the pin setting. TEST=verified that boot into OS on meep board. suspend/resume, reboot, and no failure found. Change-Id: I7668ff4817edfca5c6cea63db779fcea21c7af92 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32247 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-17google/kukui: Get write protection status from WP GPIOHung-Te Lin
Write protection (get_write_protect_state) was hard-coded to 0 and should be fixed to read from correct GPIO (PERIPHERAL_EN0 from schematics). BUG=b:130681408 TEST=make -j; boots on Kukui Rev2. BRANCH=None Change-Id: I75b98b1d587abe5e8cdf3df28ea661bc1ffa19f9 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-04-16soc/intel/cannonlake: Configure Vmx support using KconfigRonak Kanabar
Change VmxEnable UPD values based on Kconfig ENABLE_VMX and remove it from Devicetree and chip.h Remove Vmx dependency on Vt-d Change-Id: I4180c2270038a28befd6ed53c9485905025a15ba Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32117 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-15google/kukui: Include LCD module identifier (LCM ID) into SKU IDHung-Te Lin
Kukui is using MIPI display panel and needs some identifier to tell payloads which LCD module is installed, and to select right kernel device tree. Following Scarlet, the decision is to embed LCD module ID as part of SKU ID. The LCM ID is using a different voltage mapping table from the rest. Considering the complexity in computation of SKU ID, it is better to move the cache logic from get_index to caller. Also revise the mapping table since ADC on 8183 only supports 12 levels. BUG=b:129299873 TEST=make -j; boots on Kukui Rev2 unit. Change-Id: Ib0c00bc8ce3c71c445c5c4561403ce8ef4dd5844 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32263 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-15mb/siemens/mc_apl4: Remove usage of external RTCWerner Zeh
The external RTC was removed on the mainboard as it is not needed. Remove the usage of the driver for RX6110SA as well. Change-Id: Ia476e58c0b0f343d4e9e4fa6039bf82b194a87d3 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2019-04-15mb/siemens/mc_apl1: Enable HDA in devicetree for all mainboard variantsWerner Zeh
With commit '4074ce0cc7 (intel/apollolake: Add HDA to disable_dev function)' FSP is now requested to switch off HDA PCI device if it is disabled in devicetree. Doing so results in a warm restart. Normally this event will be stored in CMOS RAM (if the descriptor is configured to do so) and therefore no further resets are requested by FSP on the next boots as long as CMOS RAM is kept alive. The Siemens mainboards based on Apollo Lake do not have a CMOS battery and therefore the CMOS is not backed up. This leads to reset requests from FSP after PCI enumeration on every boot. To avoid this reset enable HDA in devicetree for these mainboards. Though we do not have any usage of HDA it should not be an issue that the HDA device is now enabled. The benefit is though that no reset is requested anymore by FSP. Change-Id: I637c7c01d73350700c6066fee74fecbb5b93b221 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32295 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-15mb/google/hatch: Update sleep signal assertion widthsRizwan Qureshi
Based on the power rail discharge times measured on hatch, update the assertions widths that have to be programmed in SoC. BUG=b:129328209 TEST=warm/cold reboot and S3 are working fine on hatch. Change-Id: I3c6dce0a942e6dcd9e55ef5e58a7e9e8d2b0a1e3 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-15mb/google/octopus: Add custom SAR values for Laserpeichao.wang
Laser would prefer to use different SAR values. Since Laser sku id is 5. BUG=b:130381493 BRANCH=octopus TEST=build Change-Id: I5cce38a191edfb235e274db3c788c58b65e0ebe1 Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32296 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-13sb/intel/i82801gx: Use SOUTHBRIDGE_INTEL_COMMON_PMCLIBPatrick Rudolph
Use common code to detect ACPI S3. Tested on Thinkpad X60. Change-Id: Ia759a9ed141efc8130860300f2a8961f0c084d70 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-04-13sb/intel/i82801jx: Use SOUTHBRIDGE_INTEL_COMMON_PMCLIBPatrick Rudolph
Use common code to detect ACPI S3. Untested. Change-Id: I2264c087b317f70506817b5458295a17e83b1efc Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32038 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-13mb/google/hatch: Restore Goodix Touch ScreenEric Lai
Restore Goodix devicetree config because of the missing Goodix config when moving from baseboard devicetree to board level overridetree. And move PENH from I2C#2 to I2C#1. BUG=b:124460799 BRANCH=None TEST=local build and tested with Goodix touch screen Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic028c5d7b687a069d7f0510897bea91dca58e91f Reviewed-on: https://review.coreboot.org/c/coreboot/+/32265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-12mb/google/hatch: Use GPIO IRQ for sx9310 deviceFurquan Shaikh
This change uses GPIO IRQ instead of IOAPIC for GPP_A0 pad which is the interrupt line for sx9310. This is required because IRQ# used by GPP_A0 is allocated for PIRQ which does not allow IRQ# sharing. Additionally, this change also configures GPP_A6 for GPIO IRQ. GPP_A6 is currently unused in the devicetree. BUG=b:129794308 TEST=Verified that there are no interrupt storms on GPP_A0. Change-Id: Ibb510a647391c0d9cb854d23656bb4b1cb7756ab Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-12mb/google/hatch: Configure reset config to PLTRST for IOAPIC padsFurquan Shaikh
This change configures reset config for all pads routed to IOAPIC as PLTRST. This is required to ensure that the internal logic of the GPIO gets reset any time the platform enters S3 or powers off and avoids any interrupt storms on boot-up. BUG=b:129933011 TEST=Verified that there are no interrupt storms on boot-up from S5. Change-Id: Ib790280c9f1410fa18746d4d7d2a5027afd7585b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-04-12mb/google/hatch: Skip UART0 config in FSPFurquan Shaikh
UART0 is already configured in coreboot, so this change sets SerialIo config for UART0 to PchSerialIoSkipInit to skip initialization in FSP. BUG=b:130325418 Change-Id: Ifc88f4fa11bff2144417d5194776c15f9f7b60ac Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com>
2019-04-11mb/asrock/h110m: Add virtual LDN for SuperIO to DTMaxim Polyakov
Adds virtual logical devices numbers for the Nuvoton (NCT6791D) SuperIO to the devicetree. Change-Id: I7df1633951c30fef14c62c89aaedebd3044b312f Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-04-11google/kukui: Add variant 'Krane'Hung-Te Lin
Add the new configuration 'Krane' that will need at least its own EC. There's currently no difference in coreboot side. BUG=b:130011505 TEST=make menuconfig; make -j # select board=Krane BRANCH=None Change-Id: Ibb2ec42b08f9a51b22c22f3fe99b203f5eb31627 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-11mb/google/sarien: Reserve gpio pins for D3 cold controlEric Lai
Based on HW change, reserve gpio pins for D3 cold control. A13,A15 for Card reader H13 for M.2 SSD BUG=b:123263562 TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib4245be8d77c015e56df7b1d53ef82722c51d656 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-11mb/google/sarien: Change GPIOs to avoid leakage during S0iXRoy Mingi Park
Three GPIOs are not being used and this change will save 2-3mW power during S0iX and this power saving is only for Arcada BUG=b:129990365 TEST= Measure total platform power during S0iX from Arcada Change-Id: Ie0208bd6c7affb2e87fd76005b727ea7effdf434 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-11mb/google/ampton: Fix polarity of EN_PP3300_WLAN_L signal.Tim Wawrzynczak
WiFi enable signal was configured and driven as active-high, but the signal is |To start the server in this Emacs process, stop the existing actually active-low BUG=b:130196983 BRANCH=none TEST=Verified WiFi still works after boot, and also after a suspend/resume cycle. Device powers down correctly using "poweroff". Change-Id: I64a67f73564188ad0548a1a770169ef2bca47453 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32255 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-11chromeos: clean up "recovery" and "write protect" GPIOsJoel Kitching
The "write protect" GPIO's cached value is never actually read after entering depthcharge. Ensure the value from get_write_protect_state() is being transferred accurately, so that we may read this GPIO value in depthcharge without resampling. The cached value of the "recovery" GPIO is read only on certain boards which have a physical recovery switch. Correct some of the values sent to boards which presumably never read the previously incorrect value. Most of these inaccuracies are from non-inverted values on ACTIVE_LOW GPIOs. BUG=b:124141368, b:124192753, chromium:950273 TEST=make clean && make test-abuild BRANCH=none Change-Id: Ic17a98768703d7098480a9233b752fe5b201bd51 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-11google/kukui: Use internal CR50_IRQ pull-upYou-Cheng Syu
For Kukui CR50_IRQ pin, we're going to replace external pull-up with internal pull-up. This change won't break older boards, so we can just always do that when setting up GPIOs. BUG=b:124821269 BRANCH=none TEST=Waveform looks correct. Change-Id: Ib1a90dce583a6aa0cec8ac8ba96d1362f50c16a8 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-04-11mb/google/octopus: Disable WLAN prior the entry of S5Kane Chen
ODM reported issues that some systems can't be shutdown to S5 very occasionally. ODM found issue is gone if they remove the WLAN card. So, this change to disable WLAN before system enters S5. This change is validated by ODM and it does help issue. BUG=b:129377927 Change-Id: Ib8e81022b8c9b63bc75e5cc14121233222da7595 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32246 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Chen Wisley <wisley.chen@quantatw.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-10mb/ocp/monolake: Add board.fmdAndrea Barberio
Change-Id: I6095c3b30990b530c5bc4e2c808879252680e1d7 Signed-off-by: Andrea Barberio <barberio@fb.com> Signed-off-by: David Hendricks <dhendrix@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-09google/kukui: Configure AP_IN_SLEEP_L correctlyYou-Cheng Syu
This pin should be set to its alternative function SRCLKENA0 instead of GPIO, so that SPM (a power management component of MT8183) can control it. BUG=b:113367227 BRANCH=none TEST=1. Boot. Run 'powerinfo' in EC console and see power state in S0. 2. Run 'powerd_dbus_suspend --wakeup_timeout=10', and then run 'powerinfo' in EC console and see power state in S3. 3. Wait until AP resume. 4. Run 'powerinfo' in EC console and see power state back to S0. Change-Id: I0a7e34f95381dec17eb6d166d6552c12e021bd9a Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32120 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-09mb/google/hatch: Support 16MiB fmapPhilip Chen
Add a fmd file for 16MiB fmap, so that we can support both 16MiB / 32MiB SPI flash ROM chips. BUG=b:129464811 TEST=build hatch firmware image with 16MiB fmap and verify fmap is updated by 'fuility dump_fmap' Change-Id: Ifc0103c7fd0d99439f40a31d23422401a6dce826 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-09mb/google/hatch: Add ACPI support for BT reset functionalityTim Wawrzynczak
Expose the Bluetooth BT_DISABLE_L signal in Hatch's devicetree, on both USB2 port 5 and 10. BUG=b:123293169 BRANCH=none TEST=compiles, verified kernel is able to find the reset-gpio Change-Id: I6e4d9786e44f12da71533b6740fdd390f3a57e40 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32216 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-08mb/facebook/watson: Make turbo mode configurable (disabled by default)David Hendricks
Change-Id: Ief1eaab960c8fdab5bd5041b1a4f0c6ba1dd833f Signed-off-by: David Hendricks <dhendrix@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32222 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-08Replace remaining IS_ENABLED(CONFIG_*) with CONFIG()Nico Huber
Another run of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I3243197ab852a3fbc3eb2e2e782966a350b78af2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-08nb/amd/pi, mb/amd/bettong: Fix null pointer checksJacob Garber
The dev pointers were being dereferenced before the null check. Move the checks so they are done earlier. Found-by: Coverity Scan, CID 1241851 (REVERSE_INULL) Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Ie578787c3c26a1f3acb4567c135486667e88a888 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-04-08siemens/mc_apl5: Remove reduced clock rate for I2C0Mario Scheithauer
There is no device on I2C0 which requires a lower clock rate. Change-Id: Iaf01be5ea4839c54eb2f0ba95bca272970c24bdb Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-04-08mb/mainboard/google/sarien/variants: Set correct tcc_offset valueSumeet Pawnikar
Set new tcc_offset value to 10 degree C. This configures the Thermal Control Circuit (TCC) activation value to 90 degree C. It prevents any abrupt thermal shutdown while running heavy workload. This helps to take early thermal throttling action when CPU temperature goes above 90 degree C. Change-Id: Ica77264782b4a3f3e72e73e1b8cb8b2e464fb033 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-08mb/google/sarien: Add support for melfas touch panelEric Lai
Add a support melfas touch panel with i2c address:0x34. BUG=b:122019253 TEST=tested with new melfas touch panel and worked Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I27f5c47517d093c819cbbbcdafd85d74145887e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32169 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-06src: Use include <delay.h> when appropriateElyes HAOUAS
Change-Id: I23bc0191ca8fcd88364e5c08be7c90195019e399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-06mb/amd/bettong/mainboard: Drop unused include <agesawrapper.h>Elyes HAOUAS
Change-Id: I020c1b9558f6aec47b048fa575c64c619b8c592a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32013 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-06mb/asrock/h110m: Add PEG Gen3 supportMaxim Polyakov
This patch adds support PCIe Gen 3 with 8GT/s link speed for PEG x16 slot. All parameters for FSP are set during initialization in romstage. Now there is no need to additionally configure the FSP before building the ROM image. Tested on Intel Core i5-6600 processor with the following devices: - LP11000e Fibre Channel HBA (Gen2 x8); - PEX8734 PCIe Fabric/Switch (Gen3 x16); - NVIDIA GeForce GTX 1060 GPU (Gen3 x16). GPU works with an nouveau and proprietary driver under Ubuntu 18.04.2 (4.15.0-46-generic GNU/Linux kernel). Discrete graphic card is used as primary device for display output. Dynamic switching is not yet supported. Tianocore (edk2-stable201811-216-g51be9d0) is used as the payload. Change-Id: Ia4f29df47d76de5069fe53120434cc7c2ab6f044 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31948 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-06mb/asrock/h110m: Set PEG as primary GFX deviceMaxim Polyakov
If an external graphics card is inserted in the PEG, it will be used as the primary display device (as in the AMI BIOS) Change-Id: Iea846179fc309c2b98093de37c05ceb332081f4f Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
The InternalGfx option in devicetree.cb is not used to enable iGPU. The patch removes this option from chip.h and mb/*/devicetree.cb files for all boards with skl/kbl processor. Change-Id: I41ecca3fdfb1d4b20ee634a13263ff481dcf440e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-04mb/google/hatch: Move I2C/SPI options to override treeFurquan Shaikh
This change moves the I2C/SPI devices and configs which do not apply to all variants to override tree. Currently, there are just two variants. However, as we prepare to add more variants, these devices need to be moved out of the base devicetree. BUG=b:129728235 TEST=Verified that I2C/SPI devices are present in static.c for hatch and hatch_whl. Change-Id: I9426f6bf5f8514de5f1889e22e57105749fd92de Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32138 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-04mb/google/hatch: Change the DEVSLP reset config to PLTRSTRizwan Qureshi
In S3 the PCH is driving the DEVSLP signal low, assuming that the SATA device is already powered off. However on hatch the SATA power is still enabled. And, since DEVSLP is low, this causes the SATA device to not enter low power state. The fix here is to set the pad config to be reset on PLTRST assertion which will cause the pin to be high impedance state and will be pulled up by the SATA device. BUG=b:126611255 BRANCH=None TEST=Make sure that S3 and S0ix is working fine on hatch. And also make sure that DEVSLP is pulled high in S3. Change-Id: Ifb6a71a72244522c8dd8d48e9b9f8dc6feef8981 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-04siemens/mc_apl4: Provide CLK on APL Pin PMU_SUSCLKUwe Poeche
This patch provides a clock on Pin PMU_SUSCLK. This is necessary for correct function of the SMARC module. Test=mc_apl4 flashed, booted into Linux, ckecked CLK with scope Change-Id: Ieb1d66b5a09363c9bed2b19e7a204f206ee04158 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32168 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-04mb/google/fizz/variants/karma: Clear GPP_B4 when entering S5David Wu
Set GPP_B4 to low in S5 to meet touch panel power sequence BUG=b:124197348 BRANCH=master TEST=Verify GPP_B4 is low. Change-Id: I65deb33a45fdc0c0ce64deaa29c2790029dc1d12 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-04mb/intel/coffeelake_rvp: Configure FSP UPDs of DDI ports for cmlrvpV Sowmya
This patch configures FSP UPD values for HPD and DDC of DDI ports for CMLRVP. BUG=none TEST= Tested that eDP works on CMLRVP. Change-Id: If8c8480eaf2d63cec0b5598b5af3088c630dd78a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32140 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-04mb/google/hatch: Add Kohaku boardShelley Chen
Adding Kohaku as a variant of hatch. BUG=b:129706980 BRANCH=NONE TEST=./util/abuild/abuild -p none -t google/hatch -x -a make sure HATCH_KOHAKU is built as well. Change-Id: I5b451f421f6d353005e6b73eac180dcec2e8b0c0 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-04mb/google/hatch: Create kohaku variantShelley Chen
Creating Kohaku hatch variant. Currently taking a copy of the hatch variant. Kohaku-specific changes to come in future CLs. BUG=b:129706980 BRANCH=NONE TEST=NONE Change-Id: Ib4b8c2c8332910d992549e3aae8e6aff5234698b Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32160 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-04vboot: remove Kconfig option VBOOT_PHYSICAL_REC_SWITCHJoel Kitching
This option is duplicated in depthcharge: https://crrev.com/c/1545144 BUG=b:124141368, b:124192753, chromium:943150 TEST=make clean && make test-abuild CQ-DEPEND=CL:1545144 BRANCH=none Change-Id: I48e20ad21cdcb948a23387d3e5fcf142723b0c82 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-04-03mb/google/hatch: Enable Goodix Touch ScreenEric Lai
Enable Goodix touch screen. Follow GT7375P_Datasheet_Rev.0.1 BUG=b:124460799 BRANCH=None TEST=local build and tested with Goodix touch screen Change-Id: Ib204e6b77b87ba6c775cf38e572476dd9eb37d1d Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32134 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-03mb/google/sarien/variants/sarien: Update thermal configuration for DPTFJohn Su
Follow thermal table for second tunning. BUG=b:129509918 TEST=Built and tested on sarien system Change-Id: I64844b84891dc3ab7abe9378cdca5dcf57b3e433 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-04-02mb/google/poppy/variants/nami: update sku_ids for PantheonFrank Wu
The sku ids are updated for Pantheon. Sync'ing the sku_ids list in the master sku sheet for Pantheon. BUG=b:121207221 BRANCH=firmware-nami-10775.B TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Ibf683ca8219b2980ea9d9c40b06db264d58440b0 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2019-04-02mb/google/hatch: Change GPIO_E1 settingJohn Su
For HW require to change GPIO_E1. Change GOIO_E1 setting from NF2(SATAGP1) to NF1(SATAPCIE1). BUG=b:123730924 TEST=flash BIOS and make sure hatch boots up properly Change-Id: I0f5569e13b17a2dc713be5031a63436e8f31f911 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32099 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-02mb/google/hatch: Re-configure GPP_A12 as GPO before entering sleepKrishna Prasad Bhat
GPP_A12 has a Native3 (SX_EXIT_HOLDOFF#) mode, which allows to delay resuming to S0. If this pad is not locked and platform was not initially designed for this functionality, malware could reconfigure this pads setting under OS (switch to Native3), which would make platform not able to resume until G3 is applied. To prevent misuse of this pad, re-configure this pad before entering S3 and S5 to guarantee that the pad configuration is correct. BUG=b:128686027 Change-Id: I1e7979baa491acf2c56d223afb4618f0f6429e37 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-01mb/aopen/dxplplusu: Remove redundant use of ACPI offset operatorElyes HAOUAS
Change-Id: I790303a1fab64dbbe749563325394b9be2c109ad Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-04-01assert: Make dead_code() work at link-time instead of compile-timeJulius Werner
The dead_code() macro can be used to ensure that a certain code path is compile-time eliminated (e.g. if you want to make sure it's never executed for certain Kconfig combinations). Unfortunately, the current implementation via __attribute__((error)) hits only at the GCC level. This can catch code that can be compile-time eliminated based on state within the same file, but it cannot be used in cases where a certain library function is built but then garbage collected at link time. This patch improves the macro by relying solely on the linker finding an undefined reference. Unfortunately this makes the error message a little less expressive (can no longer pass a custom string), but it is still readable and one can add code comments next to the assertion to elaborate further if necessary Change-Id: I63399dc484e2150d8c027bc0256d9285e471f7cc Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32113 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-01mb/google/sarien: Enable Bluetooth RF killLijian Zhao
Add bluetooth Rfkill function to recover the Bluetooth controller in cases where itself has entered a bad state and needs to be recovered. Bug=b:129375810 TEST=Boot up into OS and dump SSDT table, check there's _DSD entry under Bluetooth devices with GPIO in. Also confirm bluetooth itself is functional. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I79a310a55d94d7d20d1705afc11fe47cbb81abc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-01mb/google/hatch: Unlock GPIO padsKrishna Prasad Bhat
GPP_A12 is being used as FPMCU_RST in hatch. This GPIO is being padlocked in FSP and cannot used in kernel. Hence unlock the GPIO pads to export this pin in kernel to be used as FPMCU_RST. BUG=b:128686027 BRANCH=None TEST=Read Pad Configuration Lock (PADCFGLOCK_GPP_A_0) register. localhost /sys/class/gpio # iotools mmio_read32 0xfd6e0080 0x00000000 localhost /sys/class/gpio # echo 212 > export Change-Id: Ie0439956e6c8e386435e535665ccaf2ab82adeb0 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32126 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-31mainboard/asus/p8h61-m_pro : Support TPM moduleSimon Newton
Select support in Kconfig and configure device in devicetree Tested with ASUS addon TPM modules, v1.2 (ASUS TPM-L FW3.19 rev1.02H) and v2.0 (ASUS TPM-L R2.0 rev1.00) using SeaBIOS and Linux OS Change-Id: Icdad9a41b61221b536f2ac695f44319f6b0599e7 Signed-off-by: Simon Newton <simon.newton@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-03-29src: Use include <reset.h> when appropriateElyes HAOUAS
Change-Id: I3b852cae4ef84d257bf1e5486447583bdd16b441 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-29mb/google/arcada: Make bluetooth reset_gpio active lowMike Hsieh
Follow b:129375810 to set bluetooth reset_gpio as ACPI_GPIO_OUTPUT_ACTIVE_LOW BUG=b:129375810 TEST=Verified BT function on Arcada DVT1 system. Signed-off-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com> Change-Id: I816eb2a76f642a2bb1702f38138bce7916334011 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-29mb/google/arcada: Make touchscreen IRQ level triggeredMike Hsieh
Touchscreen lost function after boot with stylus touching the screen BUG=b:128554235 Signed-off-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com> Change-Id: I692fc6f245b7fade67862da4986a83d11a2cd51f Reviewed-on: https://review.coreboot.org/c/coreboot/+/32100 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-29mb/google/hatch: Deassert EN_PP3300_WWAN during sleepMaulik V Vaghela
Deassert EN_PP3300_WWAN to turn the WWAN module completely off when entering S5. This is the same fix in commit eeb475c5c for coral board. BUG=none BRANCH=none TEST=On hatch, Perform a quick system power cycle, verify that the modem is powered cycle and the SIM with PIN lock enabled requests unlocking. Change-Id: I3ec8ccb7618189b9e8586f5571a68d3309597ee7 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28mb/google/sarien: Call EC romstage init functionDuncan Laurie
When in romstage call into the EC init function so it can send a progress code to the EC before memory training starts. BUG=b:127875364 TEST=boot with FSP debug and ensure EC does not try to turn off the system while it is still booting. Change-Id: I5d99fb16bae250a82b652c530c13977e74c3378b Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 00:12:19 +0000