aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/intel/galileo: Clean up `FMDFILE` Kconfig handlingAngel Pons
Remove redundant type, prompt and help text, and replace `depends on` clause with conditional default to allow specifying a FMAP when vboot is not selected. Change-Id: I37ddab3a27e304e810ea55f13821d755bb70cb4b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56551 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/facebook/monolith: Don't override `CBFS_SIZE` promptAngel Pons
Change-Id: I6fac40918f1ca3227ff68e79fcae039a26356d0d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56550 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/google/brya: Deduplicate chipset lockdown configFelix Singer
Due to an issue in sconfig, move `chipset_lockdown` out of `common_soc_config` and configure it separately in the baseboard's devicetree since it might get overwritten if a variant configures `common_soc_config`. Also, deduplicate the configuration of `chipset_lockdown`. Change-Id: Id969346df06aa82ab2ad2b1aa4884a9bcd876d75 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56408 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/intel/coffeelake_rvp: Use CHIPSET_LOCKDOWN_COREBOOTFelix Singer
Currently, internal flashing is not possible due to FSP lockdown. Thus let coreboot do chipset lockdown on all variants. Change-Id: Ib25a0543bfee0889dce071f3b01725daabd0a0eb Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56407 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/google/dedede: Program VCCIO selection for EN_SPKR GPIOKarthikeyan Ramasubramanian
Realtek speaker amplifiers under auto mode operation have Absolute Max Rating (AMR) at 1.98 V. Hence probe the firmware config for speaker amplifier and program the VCCIOSEL accordingly. BUG=b:194120188 TEST=Build and boot to OS in Gallop. Ensure that the VCCIO selection is configured as expected and probing the GPIO reads the configured voltage. Change-Id: Ifa0b272c23bc70d9b0b23f9cc9222d875cd24921 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-07-26mb/google/dedede/var/pirika: Add USB2 PHY parametersAlex1 Kao
This change adds fine-tuned USB2 PHY parameters for pirika. BUG=192601233 TEST=Built and verified USB2 eye diagram test result Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Change-Id: Icf9fb41cd0ae40728e4ec5bd72a15ec3c45c963b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-26mb/google/dedede/var/cappy2: Generate SPD ID for supported memory partsSunwei Li
Add supported memory 'K4U6E3S4AA-MGCR' for cappy2 BUG=None TEST=Build the cappy2 board. Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com> Change-Id: Ie76a4dca607bb2c3261bbe5478209a43e8430591 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-26mb/asus/p5ql-em: Add default value for `gfx_uma_size`Angel Pons
Taken from Asus P5QPL-AM. Change-Id: If26e98eba5d762d99991bfc06cad1b84e1f430e3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56562 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26soc/intel/jasperlake: Set xHCI LFPS period sampling off timeBen Kao
Provide an option to set xHCI LFPS period sampling off time (SS_U3_LFPS_PRDC_SAMPLING_OFFTIME_CTRL in JSL EDS revision 2.0). If the option is set in the devicetree, the bits[7:4] in xHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated. The host will sample LFPS for U3 wake-up detection when suspended, but it doesn't sample LFPS at all time due to power management, the default xHCI LFPS period sampling off time is 9ms. If the xHCI LFPS period sampling off time is not 0ms, the host may miss the device-initiated U3 wake-up and causes some kind of race condition for U3 wake-up between the host and the device. BUG=b:187801363, b:191426542 TEST=build coreboot with xhci_lfps_sampling_offtime_ms and flash the image to the device. Run following command to check the bits[7:4]: iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Ben Kao <ben.kao@intel.com> Change-Id: I0e13b7f51771dc185a105c5a84a8e377ee4d7d73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-26mb/google/brya: move the common config to the baseboardZhuohao Lee
This patch moves the common config to the Kconfig under BOARD_GOOGLE_BASEBOARD_BRYA and removes the redundant config. BUG=b:191472401 BRANCH=None TEST=build pass Change-Id: Ie59299dfaba6bb23758d4a4c22a6dbbb4ba6520e Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56387 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/google/brya: Enable BT offload conditionallySugnan Prabhu S
Currently, BT offload is disabled/enabled unconditionally based on the devicetree settings. BT offload uses I2S lines and cannot be enabled when a I2S based audio daughter card is active. So we need to enable BT offload only while using soundwire based audio daugther card. BUG=b:175701262 TEST=Verified BT offload on brya with soundwire audio daughter card BT offload enabled Change-Id: I6a9ad463e13e2cfcfc3b7de5a61a25cdef0641f7 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-25mb/razer/blade_stealth_kbl/Kconfig: Fix up indentationAngel Pons
Change-Id: I0ffae7408f11f4f517204a0a670845c11b3601a8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56549 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-24soc/amd/*/chip.h: Correct PSPP Enum ValueMatt Papageorge
It appears the pspp_policy enum is not the same as the FSP definition currently being used. This means that the incorrect PSPP value setting would get read by FSP. For Zork programs this meant we actually were setting links as DXIO_PSPP_BALANCED instead of DXIO_PSPP_POWERSAVE. This change adds DXIO_PSPP_DISABLED as the first enum value to properly match the FSP definition and adjusts non AMD Customer Reference Boards that reference the enum to still send the same value even though it has now change definitions. If we actually want DXIO_PSPP_POWERSAVE for those boards that can be adjusted in a future change. BUG=b:193495634 TEST=Boot to OS with Majolica and Guybrush and run 10G iperf on wifi with other server on local network. Change-Id: I287b6d3168697793a2ae8d8e68b4ec824f2ca5ef Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-07-24mb/google/guybrush: Update GPIOs settingsMartin Roth
- The WWAN card was being disabled later than desired. - The SD card was never being placed into reset on BoardID 1. - Enable Touchscreen power - Enable PCIe_RST1 at the same points as PCIe_RST - Remove Redundant Bootblock settings BUG=b:193036827 TEST=Build & Boot, look at GPIO states through boot process Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I5431da755d98e4ad0b300d01cac562d61db0bc08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-23soc/amd/stoneyridge/fch: change sb prefix of sb_clk_output_48Mhz to fchFelix Held
Stoneyridge has an integrated FCH and no south bridge, so change the sb prefix to fch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5154ae1158f864d4a2aca55e6bcce6a742c6afe1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56527 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-23herobrine: get boardid from GPIO configurationRavi Kumar Bokka
Getting boardid information for the different SKU variants BUG=b:182963902, b:193807794 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I2b7625f9b98563438d1ac20e6f29411ef1058cf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-07-23mb/siemens/mc_ehl1: Add GPIO configurationWerner Zeh
Provide a valid GPIO configuration based on the mainboard wiring. Change-Id: I36f0e8292a405b4bac74fbc5fde62e5e414387e7 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56519 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-23mb/siemens/mc_ehl1: Remove SD-Card card detect GPIO in devicetreeWerner Zeh
Since there is no SD card interface on this mainboard do not set the card detect GPIO. Change-Id: Ibe6799c5c540538f97d1726ec16e79f3edbb16fd Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56489 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-23mb/siemens/mc_apl{1,2,3,5,6}: Use PCI_ALLOW_BUS_MASTER_ANY_DEVICEWerner Zeh
Use the Kconfig switch PCI_ALLOW_BUS_MASTER_ANY_DEVICE instead of PCI_ALLOW_BUS_MASTER to enable PCIe bus master bit as requested in CB:56441 during review. Change-Id: I433dbae0d9b15e41d1d0750298868341ce3d6b46 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-07-23mainboard/up/squared: Add one more DRAM configurationFlorian Laufenböck
Add a new configuration option with more density for 8GB variants of the up squared board. Settings are taken from slimbootloader. Signed-off-by: Florian Laufenböck <florian@laufenbock.de> Change-Id: I217b04be94e913b75e2bac0a4ae1c43f2411a044 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-07-23mb/google/veyron: Remove references to EC firmware board namesPatrick Georgi
Chrome EC is relatively quick with retiring "old" boards from their tree so when upreving it, the last veyron in that list that wasn't commented out is gone as well. Change-Id: Ie1ef693c8d0947396ee01e5aa5f40ef36c8a317a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56430 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-23mb/google/cherry: replace magic numbers by the I2C bus nameRex-BC Chen
When accessing I2C, we should use the official names (I2Cx) instead of magic numbers. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I17cc4c87f5ad26deeb5e529d1c106b697a53591b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56504 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mb/google/guybrush: Setup EC_IN_RW GPIO and export to payloadKarthikeyan Ramasubramanian
EC_IN_RW_OD signal is routed from Google Security Chip to GPIO_91 in the upcoming hardware build. The existing SD_EX_PRSNT signal is dropped in the upcoming hardware build because SD7 support is dropped. Export the EC_IN_RW GPIO for use by payload. BUG=None TEST=Build and boot to OS in Guybrush. Ensure that the device can boot successfully in both recovery and normal mode. Cq-Depend: chromium:3043702 Change-Id: I8986ba007a2d899c510be61664d90430b8d2d384 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56493 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mb/siemens/mc_ehl1: Disable GSPI in devicetreeWerner Zeh
Since this mainboard does not use GSPI at all, disable all GSPI ports. Change-Id: I60254e9f4047537d86c972151ec9e33552332959 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-22mb/siemens/mc_ehl1: Adjust I2C bus enablement in devicetreeWerner Zeh
This mainboard uses I2C1 and I2C4 buses only. Disable all the others as they are not connected at all. Change-Id: I4743f6ea6b9a9987ad63b60f56ee9a597a08284b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-22mb/siemens/mc_ehl1: Disable power management features for SATAWerner Zeh
Features like DevSLP and Aggressive Link Power Management are not supported on this mainboard and are therefore disabled. Change-Id: I3bc650ea78be8587889fb7abfe7075cd9a122198 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-22mb/google/dedede/var/cret: Add Wifi SAR for cretIan Feng
Add wifi sar for cret. BUG=b:194163601 TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: Ic2f3dbc5822c1f4b1c935c87295ba9916e0e359e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-07-22mb/siemens/mc_ehl1: Adjust PCIe settings in devicetreeWerner Zeh
This board does not use CLKREQ-signaling for PCIe, so disable the pin assignments. In addition only three clock outputs are used for PCIe, therefore disable all others to improve EMI. Change-Id: I545f890fa55a109df7f44d2c82170874fb769009 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56455 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mb/siemens/mc_ehl1: Adjust USB port settings in devicetreeWerner Zeh
There are in total three USB ports that are used on mc_ehl1: - Port 1: Type A connector connected to USB2/USB3 port 0 - Port 2: Type A connector connected to USB2/USB3 port 1 - Onboard: connected to USB2 port 2 None of the ports supports overcurrent reporting. Adjust the appropriate UPDs in devicetree to match the hardware configuration. Change-Id: I220637b8e9f03efccacd0955e82cfc0c7a6f53ee Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56454 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mb/siemens/mc_ehl1: Remove display related UPDs from devicetreeWerner Zeh
Since mc_ehl1 does not have a display attached nor have a display connector available (pure headless design), remove display related settings from the devicetree. Change-Id: Id31c09fcfba15f55eed19134bd0c2fb887bd2478 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56453 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mb/google/brya/variants/redrix: Configure GPIOs according to schematicsWisley Chen
Update initial gpio configuration for redrix BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I2294fb3bdba832677038cfe24b5014014c7f03e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56428 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mainboard/google/herobrine: Add configuration for SD card detect pinShaik Sajida Bhanu
Without this configuration, even though there is no SD card it shows as SD card is present and host controller waits for card to respond. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board with SD card and without SD card, make sure if SD card not present then host controller should not wait for card to respond. Change-Id: I5dc5ba10c98d606d98e7d4f4c41c3e4f45e94452 Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-07-21mb/google/brya/variants/primus: Update two GPIOsariel fang
1. Move M2_SSD_PLN_L to GPP_D3 for power loss notify function. 2. Set GPP_E21 as NC to remove LCLW_DET function BUG=b:190643562 Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com> Change-Id: Id3c60adeb5d35c79a1c700937f93a80ad3587c5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56420 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/google/brya: Program Unused Cnvi BT related GPIOs to NCMaulik V Vaghela
Program unused Cnvi BT UART GPIOs as NC since we are using Bluetooth over USB mode for Brya. Change-Id: I33a37ceb8a91603d2a193de5bdd1b6885eb3c319 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55317 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/google/brya: Create taeko variantKevin Chang
Create the taeko variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:193685558 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_TAEKO Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: If738849bc3103c52a4c4d8a8aaef3f90a62ad5c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56385 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/google/brya/var/gimble: Include SPD for MT53E1G32D2NP-046 WT:A and ↵Mark Hsieh
K4U6E3S4AA-MGCR Add SPD support to gimble for LPDDR4 memory part MT53E1G32D2NP-046 WT:A and K4U6E3S4AA-MGCR. BUG=b:191574298 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I4bfc18fd42c6ff2675e6f836c2ecc9617fac3aff Reviewed-on: https://review.coreboot.org/c/coreboot/+/56329 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/siemens/mc_apl{1,2,3,5,6}: Set PCI bus master bit only if allowedWerner Zeh
Take Kconfig switch PCI_ALLOW_BUS_MASTER into account and set the PCI bus master bit for legacy devices only if it is allowed. Change-Id: I7798a767d528419bb093f301140ab68cc8b9c5ae Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-21mb/google/brya: Add variant specific soc chip config updateSugnan Prabhu S
This patch adds support for variant specific soc chip config update function. Change-Id: Ic3a3ae0b409433e6dfa102c5e7a6322d4f78f730 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-21mb/google/octopus/variants/ampton: Resume from suspend on critical batteryJames Chao
This patch makes Ampton EC wake up AP from s0ix when the state of charge drops to 2%. Demonstrated as follows: 1. Boot Ampton. 2. Run powerd_dbus_suspend. 3. On EC, run battfake 2. 4. System resumes. BUG=b:189540432 BRANCH=Octopus TEST=Verified on Ampton. Change-Id: I98d8e6ea185e8782ad675d4668678b341ca5d350 Signed-off-by: James Chao <james_chao@asus.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56341 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/google/brya/variants/primus: add dram part idMalik_Hsu
This change adds mem_parts_uesd.txt that contains the new memory parts used by primus and Makefile.inc generated by gen_part_id.go using mem_parts_used.txt. BUG=b:193813079 Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I6aa37114f3a164a4f3c35dfc9b43e1106b825bff Reviewed-on: https://review.coreboot.org/c/coreboot/+/56366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-21mb/google/herobrine: Retrieve SKU ID from ECPhilip Chen
BUG=b:186264627 BRANCH=none TEST=build herobrine Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Id3faf7af64c0129ec646a01085adc43b561225d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-07-21mb/google/cherry: add mt6360 support for MT8195Rex-BC Chen
For new MT8195 devices we will control mt6360 via EC, so we have to add ec function of controlling MT6360 and add CONFIG to separate them. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic2228f5b45173f0905ea66a3a1f00ec820e0f855 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-07-21mb/google/cherry: initialize SD card reader using regulator interfaceRex-BC Chen
TEST=boot kernel from sd card pass on Cherry board. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic20a2f3f053130ded202cf5ec861450f0f18eed0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56437 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/intel/ehlcrb: Update FIVR configsLean Sheng Tan
This patch sets the optimized FIVR configs for ehlcrb customized based on the performance measurements to achieve the better power savings in sleep states. - Enable the external V1p05, Vnn, VnnSx rails in S0i3, S3, S4, S5 states. - Update the supported voltage states. - Update max supported current, voltage transition time and RFI spread spectrum. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I1e30ff6d84bfe078fcce0f968fce6aaab7fd575b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55981 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/google/cherry: add mt6360 ids for regulator.cRex-BC Chen
Add MTK_REGULATOR_VCC and MTK_REGULATOR_VCCQ for regulator.c. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iedb1036da3c87106157c51cc46b52545faba102c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56436 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21soc/mediatek/mt8195: modify mt6360 interfaceRex-BC Chen
With the new definition of mt6360_regulator_id, merge the MT6360 LDO and PMIC interfaces into one. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7ccc32cb0a9481d5f55349c152267a44fe09d20a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-07-21soc/mediatek/mt8195: redefine mt6360_regulator_idRex-BC Chen
On MT8195 platforms with BC1.2, we have to use EC to control MT6360 so the mt6360_regulator_id is redefined to match the numbers defined in EC driver. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I9437edb9776442759ce04c31d315c3760078ffb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56434 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/intel/adlrvp: Enable I2S audio codecs on ADL-M RVPAnil Kumar
- Add configurability using FW_CONFIG field in CBI, to enable/disable I2S codec support for MAX98373 codecs - AUDIO=ADL_MAX98373_ALC5682I_I2S: enable max98373 codec using expansion board Bug=None Test=With CBI FW_CONFIG set to 0x100, check I2S audio output on expansion card Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: If2649647e58c5f30e2b539d534adf2a4e68f4fda Reviewed-on: https://review.coreboot.org/c/coreboot/+/52221 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21Revert "mb/google/brya: Enable south XHCI ports 1 and 2"Tim Wawrzynczak
This reverts commit f7f715dff38c4a629139b2493ed6e0d7cc2eb36f. Reason for revert: FSP 2207.01 uses the UsbTcPortEn UPD for TCSS XHCI enable BUG=b:184324979 TEST=boot brya, all 3 USB Type-C ports still enumerate devices Change-Id: I82bae21d185247bc0f3580fd6f92abb8eece6732 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56132 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.corp-partner.google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-20mb/siemens/mc_ehl: Move SPD data to variant directoryWerner Zeh
Since the variants can have different memory move the SPD related content to the variant directory. Change-Id: I38aa5e7514437bfcc61c38d64f0ba6f19350810d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56036 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-20mb/google/volteer/variants/collis: Fix pen ejection eventFrankChu
Modify PENH device GPIO GPP_E17 for pen ejection event. BUG=b:192511670,b:193093749 BRANCH=firmware-volteer-13672.B TEST=test pen insert and remove by evtest , SW_PEN_INSERT value 1 when insert pen to pen slot. SW_PEN_INSERT value 0 when remove pen from pen slot. Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ida5e5b35464471a7896cef392e178a3d2c0ea1aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/56331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2021-07-19grunt/treeya: add Realtek ALC5682 codec supportKevin Chang
Replace audio codec from DA7219 to Realtek ALC5682. Add Realtek ALC5682 support. BUG=b:185972050 BRANCH=master TEST=check on treeya system ALC5682 audio codec is working normally. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I49c673fd944b2c2a79c4283eee941a16596ba7fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/56100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-07-19mb/{google, intel}: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: I411f4f2c237a9e2d39038ee30f2957698ee053bd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-07-17mb/google/zork/var/vilboz: Add new memory MT40A1G16RC-062E:BFrank Wu
Add new ram_id:1000 for memory part MT40A1G16RC-062E:B. BUG=b:193732051 TEST=Generate new spd file and build coreboot. Then boot from the DUT with new memory MT40A1G16RC-062E:B Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I07c69f628da7871b990c91af4a8244430b4d96a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56328 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-17mb/intel/adlrvp: Update PMC Descriptor for Alder lake A0(906a0h) siliconSridhar Siricilla
The patch updates PMC Descriptor which is part of Descriptor Region if system equipped with Alder lake A0 silicon. This change allows to use unified Descriptor Region for Alder lake A0(CPU ID:0x906a0) and B0 (CPUD ID:0x906a1) silicons. The change has to be reverted before EOM is enableda on the system. BUG=B:187431859 TEST=Verified PMC Descriptor getting modified for Alder lake B0 silicon if not updated. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2a1f60fda7575212bb694fc423bd229452515903 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-07-17mb/google/volteer: Deduplicate lockdown configFelix Singer
The setting `chipset_lockdown` has the same configuration for all variants and they also match with the baseboard configuration. Thus, remove it from the variant overridetrees. Built google/delbin with `BUILD_TIMELESS=1` and coreboot.rom remains the same. Change-Id: I597e4487e7a0e1848d2a2f2c8f8ebd552994aac2 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56199 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-17mb/google/volteer/baseboard: Configure chipset_lockdown separatelyFelix Singer
The configuration of the setting `chipset_lockdown` doesn't have any effect for most of the variants since their configuration of `common_soc_config` overwrites the configuration of the baseboard's devicetree. If `chipset_lockdown` is configured separately in the baseboard devicetree, the variant overridetrees reuse its configuration. Thus, move `chipset_lockdown` out of `common_soc_config` in the baseboard devicetree and configure it separately. Change-Id: I595c042cf62680d61f60965710d382bfdcd81671 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56209 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-16mb/google/kahlee/Kconfig: add board-specific MAINBOARD_PART_NUMBERFelix Held
Before the part number for all boards was "Grunt". This patch adds the correct part number/name for all variants. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If506df0b1027fb09f5027d8b9653b776fe3bdc75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55681 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-16mb/google/volteer/variants/collis: Redefine GPIO_EC_IN_RW to GPP_F17FrankChu
Redefine GPIO_EC_IN_RW to GPP_F17 BUG=b:193091165 BRANCH=firmware-volteer-13672.B TEST=verify FAFT firmware_DevMode Pass Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I24f4803dc99ef3fc78852241f3a9e86ec70293d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-07-16mb/google/cherry: Allow payloads to enable USB VBUSYu-Ping Wu
Configure GPIO DGI_D4 (AP_XHCI_INIT_DONE) as output, so that payloads (for example depthcharge) can assert it to notify EC to enable USB VBUS. BUG=b:193499785 TEST=emerge-cherry coreboot BRANCH=none Change-Id: I21b7b811b8138cb3f71efecb0a0a886905c65a9c Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-07-15google/trogdor: Enable SPI_FLASH_MACRONIXJulius Werner
We may want to use that flash vendor on future variants. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I2c0fa87fd3f8de8f928e5f41eae2a78204597b5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/56288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-07-15mb/intel/adlrvp: Disable xDCI in devicetreeMonika A
Disable tcss_xdci as it is not used. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I94102240b13d2b96e0295f41bc2b0ba078faf342 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-07-15mb/google/guybrush: Make VBOOT_STARTS_BEFORE_BOOTBLOCK a defaultMartin Roth
To be able to enable & disable PSP_verstage in the saved .config file, the symbol VBOOT_STARTS_BEFORE_BOOTBLOCK needs to be changed from a select to a default with a prompt. BUG=182477057 TEST=Build, get PSP_verstage, disable VBOOT_STARTS_BEFORE_BOOTBLOCK, verify that VBOOT_STARTS_IN_BOOTBLOCK is set. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Iba735f33f9b079c9868ef2fff099c5298ff72b6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56289 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14mb/google/cherry: add configuration for tomatoRex-BC Chen
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I972c70773d4d928e75098efbf78f174d7c3ebf50 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-07-14mb/siemens/chili: Drop ineffective `SaGv` settingAngel Pons
SaGv is only available on ULT/ULX processors, which use PCH-LP. Given that the Siemens Chili board selects `SOC_INTEL_CANNONLAKE_PCH_H`, it does not use ULT/ULX processors, and thus does not support SaGv. Drop the `SaGv` setting from the devicetrees, as it has no effect. Change-Id: I5be518cce08206ad149efd1665e44a7111b24202 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56205 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-13intel/kblrvp: Move lockdown config to baseboard devicetreeFelix Singer
Clean up lockdown configuration and move it to the baseboard's devicetree. Since most of the mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, use it for the rvp8 variant for consistency as well. Built intel/rvp11 with `BUILD_TIMELESS=1` and coreboot.rom remains identical. intel/rvp8 changes, as expected. Change-Id: I78e847c321c61c3a974b26f30bc2823ff84df651 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56212 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-13mb/intel/kblrvp/variants: Fix indentation and remove empty linesFelix Singer
Change-Id: I4b5e0992494949bcb2fbda1361e0118c087a437a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56211 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-13mb/siemens/chili: Use CHIPSET_LOCKDOWN_COREBOOTFelix Singer
Currently, internal flashing is not possible due to FSP lockdown. Thus let coreboot do chipset lockdown. Change-Id: Iee4f6986e5edfe1bf6c84fe132bcb47b15bb81f5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56198 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-12mb/google/brya: Update generic device number for mipi_camera deviceVarshit B Pandya
If two generic devices use the same number, device coming later overrides the earlier device, as a result of this the static.c has only one device. In the case where we have UFC set to UFC_USB, this will result in no IPU device scope in SSDT, since its entry will be set to disbled after UFC probe. TEST=Build, Boot and Check UFC camera preview with UFC=UFC_USB Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I034cb7da787313d1cb53484922149589ac0f1c5a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-12soc/amd/{cezanne,common}: Enable IOMMU PCIe DeviceRaul E Rangel
This change only enables the IOMMU device. We still require the IVRS table to take advantage of the IOMMU. This will happen when the picasso IVRS code is moved into common. BUG=b:190515051 TEST=lspci shows IOMMU device 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1631 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5c7cae3d25af5a45d48658ffa948a2856adc4346 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-07-12mb/google/brya,primus,voxel: Update controller field for tbt_dma entriesMaulik V Vaghela
We need to reference correct USB port number for driver to identify type-C port number correctly. BUG=b:189476816 BRANCH=None TEST=Check the transactions are happening on correct port. Also checked retimer firmware update on both the ports. Change-Id: I20c088ee81610155067abad086eba8d72f73ad60 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-12mb/google/kukui: Add a new config 'Munna'Sunway
Introduce a new board 'Munna' to Kukui family. BUG=None TEST=make # select Munna BRANCH=kukui Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: Ie53750d0b79fe6d7c6e7778ba4616b557708601d Reviewed-on: https://review.coreboot.org/c/coreboot/+/56169 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-12mb/google/guybrush: enable psp_verstage by defaultKangheui Won
Select VBOOT_STARTS_BEFORE_BOOTBLOCK to turn on psp_verstage by default. BUG=b:182477057 TEST=boot guybrush Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I08befb93213aeb67e6a1e5fa91273ae61025707e Reviewed-on: https://review.coreboot.org/c/coreboot/+/55832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-12mb/google/brya/variants/primus: Update GPIO for PS8811 initCasper Chang
Route GPP_D14 to USB_A1_RT_RST_ODL for PS8811 init sequence BUG=b:193099675 Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: Ia950da61a50f30f7c4aaef572c5ed162ee76dd0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-12mb/intel/adlrvp_m: Enable EC software syncThejaswani Putta
This patch enables CONFIG_VBOOT_EARLY_EC_SYNC. EC software sync will be performed in romstage. BUG=None BRANCH=None TEST=Verify EC software sync works on adlrvp_m Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I3a13094e5da2f672a6789fe86528de44e909045e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56154 Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-12mb/google/brya: Create kano variantDavid Wu
Create the kano variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:193052432 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_KANO Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ib0670e346c113291054cb92fb57aae52f844e8c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56155 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-08mb/google/volteer/var/voema: Remove stop delay time for ELAN TSDavid Wu
Remove register "generic.stop_delay_ms" and measure data, it still can meet elan touchscreen specification that reset pull high to I2C time > 150ms (T3 > 150ms). BUG=b:185308246 TEST=Measure the T3 delay time is greater than 150ms on voema Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Id326fd4d9d71eef171580b1c6001505e698b40a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56087 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-08mb/google/brya/var/redrix: Generate SPD ID for supported partsWisley Chen
Add supported memory parts in mem_parts_used.txt, and generate SPD id for these parts. MT53E1G32D2NP-046 WT:A H9HCNNNBKMMLXR-NEE K4U6E3S4AA-MGCR MT53E512M32D2NP-046 WT:E H9HCNNNCPMMLXR-NEE K4UBE3D4AA-MGCR H9HCNNNFAMMLXR-NEE MT53E2G32D4NQ-046 WT:A BUG=b:190818098, b:190874372, b:192052098 TEST=build Change-Id: I62ee401e43bef22b4b09f41ea59bbdbc479f293c Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55885 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-08mb/google/brya: Create redrix variantWisley Chen
Create the redrix variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:192052098 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_REDRIX Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I4cfa0bd84e1ba9f8140f95d18a6da960da8124ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/55883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-07-08mb/google/brya0: Update the FIVR configurationsV Sowmya
This patch sets the disable the external voltage rails since brya board doesn't have V1p05 and Vnn bypass rails implemented. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I1c4fdb38c5c56798935b2c6627a75c3f1ac9fbef Reviewed-on: https://review.coreboot.org/c/coreboot/+/55704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-08mb/intel/tglrvp: Update Power Limit2 minimum valueSumeet Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=None BRANCH=None TEST=Build and test on tglrvp system Change-Id: I6bbbfa8e43a241df721b91425294983c1d561f2c Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-07mb/google/dedede/var/boten: Modify Wifi-SAR sku conditionstanley.wu
Due to new sku id apply for AMP ALC1015Q-VB. Modify correct WIFI-SAR detect condition for boten/botenflex sku. BUG=b:186174768 TEST=build and test on boten/botenflex Change-Id: I0a4fb08e558fee26534564aa5e37cac814c5a98a Signed-off-by: stanley.wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-07mb/google/dedede/var/storo: Update DPTF parametersTao Xia
Update DPTF parameters from internal thermal team. BUG=b:180875582 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I6d87bc63a66ff38bc2f706d58b8537c052bf4594 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-07mb/google/dedede/var/sasukette: Configure I2C times for touchpadTao Xia
Configure I2C high / low time in the device tree to ensure I2C CLK runs accurately between 380 kHz and 400 kHz. Measured I2C frequency just as below after tuning: touchpad:390.4 kHz BUG=b:192601250 BRANCH=dedede TEST=Build and check after tuning I2C clock is between 380 kHz and 400 kHz Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Ibe1603a48a3e841b6a50aa0c703697ec615b2854 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-07mb/siemens/mc_ehl: Switch to 16 MB ROM and provide a flashmapWerner Zeh
There is a 16 MB flash chip on mc_ehl. Set the ROM size accordingly and provide a flashmap for partitioning. Select the used flashmap on variant level to allow different layouts for different variants. Change-Id: I694729ad98f91e27308220903c49e7cb7fc436b4 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-07-07mb/siemens/mc_ehl: Clean up KconfigWerner Zeh
Remove Kconfig switches that are not needed for mc_ehl based mainboards. Change-Id: If231f37f06c6763d52a821799e87fdb3010af0aa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-07-07mb/google/zork/var/shuboz: adjust telemetry settingsKane Chen
According to stardust test tracking report to adjust telemetry setting. VDD Slope : 30595 -> 30400 VDD Offset: 77 -> 317 SOC Slope : 24063 -> 23789 SOC Offset: 105 -> 94 BUG=b:190338440 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Id997f9cd220d704c5b0882c257a596fb3d2485ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/56077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2021-07-05mb/siemens/mc_ehl: Provide a proper scheme for variantsWerner Zeh
There will be more variants of this mainboard so prepare the scheme for Kconfig to handle the variants properly. Change-Id: If1cf418836d77a45955ee55d30ba670db8ff2533 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-07-05mb/siemens/mc_ehl: Add new mainboard based on elkhartlake_crbWerner Zeh
Add a new mainboard called mc_ehl which is based on Intel's 'elkhartlake_crb'. This commit simply copies the mainboard directory and adjusts the naming to match the new board's name. Follow-up commits will introduce the needed changes for the new mainboard. Change-Id: Ia7c0616098046d975aa698910ac81f435d7882cb Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-07-05mb/intel/adlrvp_m: Remove ASL code and enable dynamic SSDT creation for ↵Varshit B Pandya
camera ACPI This change updates device tree to enable SSDT generation for world facing camera and user facing camera for ADLRVP. Also reverts DSDT changes related to both camera. TEST=Build and Boot aldrvp check i2c enumeration and output of media-ctl Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I39f82dc9eb91496d80479ae3f59ca5e03402a599 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-07-05mb/intel/adlrvp: Remove ASL code and enable dynamic SSDT creation for camera ↵Varshit B Pandya
ACPI This change updates device tree to enable SSDT generation for world facing camera and user facing camera for ADLRVP. Also reverts DSDT changes related to both camera. TEST=Build and Boot aldrvp check i2c enumeration and output of media-ctl Compared SSDT with this patch against DSDT without this patch, they are same Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I08834bbcf80dc46737de07f69a2402ed6bf93d4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-07-05mb/google/dedede: Fix the pointer/address used in memcpyKarthikeyan Ramasubramanian
The caller is already passing the address to the required LTE reset and enable GPIO. During memcpy, the address to that pointer is used which will lead to copying undefined data. Fix the pointer/address used in memcpy. BUG=None BRANCH=dedede TEST=Build Kracko, Drawcia and Metaknight mainboards which use this function. Change-Id: I79d6d9af03acd59ab5e1cd7df97bf451011dfeaa Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Found-by: Coverity CID 1458053, 1458054. Reviewed-on: https://review.coreboot.org/c/coreboot/+/56046 Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-05mb/intel/adlrvp: Update the FIVR configurationsV Sowmya
This patch sets the optimized FIVR configuration for adlrvp cutomized based on the pnp measurements to achieve the better power savings in sleep states. * Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3, S4, S5 states. * Update the supported voltage states. * Set the ICC max to 500mA for v1p05 and vnn. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I83e6910502d5cf9d4c26fa581272f59ac483ae19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-07-05mb/google/brya/brya0: Enable CrashlogTim Wawrzynczak
brya0 is a reference and development platform, therefore it would be helpful to have Crashlog enabled. Change-Id: I936e73e808e0a05e8b7822cddbb5ee3fa7dee13e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-07-05mb/google/brya: Add HANG_DETECT host event to EC S0ix wake maskTim Wawrzynczak
The brya EC supports S0ix hang detection, but it was not enabled in coreboot as well, masking that event out of S0ix, therefore add it in to the EC S0ix wake mask. TEST=After EC prints "Warning: Detected sleep hang! Waking host up!", the host actually wakes up Change-Id: I2c699114abcd9a045a41858c731e4b6fe99d3000 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-05mb/google/dedede/var/cret: Disable SDCard controllerDtrain Hsu
Cret doesn't support SDCard. Disable SDCard contorller for Cret. BUG=b:191232222 TEST=Build and boot to check lspci Cq-Depend: chromium:2993724 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I889f0545883aa75813dd91dc3e6a4dcfc246687f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-04supermicro/x11: enable COMB via LPCAlexander Couzens
Allow to use the 2nd COM port of the AST2400 which can be also used via IPMI/serial-over-lan. Change-Id: I6f9c85b1f5428d3c3acf7a2f20296134c4611b1e Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-02mb/google/dedede/var/magolor: Enable G2 touchscreen for magmaTyler Wang
Add G2 touchscreen support for magma. BUG=b:189852808 TEST=Build and verify that touchscreen works. Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I3e032bff7f3e97f54f3e544035e862058ea0dbfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/55976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2021-07-02mb/google/volteer/variants/eldrid: Include SPD for MT40A512M16TB-062E:RMark Hsieh
Add SPD support to eldrid for DDR4 memory part MT40A512M16TB-062E:R. Eldrid should use DRAM_ID strap ID 0 (0000) on SKUs populated with MT40A512M16TB-062E:R DDR4 memory parts. BUG=b:192380070 TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds successfully. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I4d07727c9c41bf494fbef373abce0ac1fc65c316 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55983 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-25 20:22:27 +0000