summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2021-04-05mb/google/mancomb: Add smihandlerEric Lai
BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I52411917d9e7e8f8d9ac5d1c9b426a58ba09f5ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/51625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-04-05mb/google/mancomb: Enable Chrome ECEric Lai
BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Id1617be67bfc5d2f142358ae8a70c3e575a94c6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-04-05mb/google/dedede/var/sasuke: Update DPTF parametersSeunghwan Kim
Remove TSR2, use DPTF parameters from internal thermal team. BUG=b:183749595 BRANCH=dedede TEST=emerge-dedede coreboot Change-Id: I3182b96bf36c8d07299fe435a29e6b8c0b8a6927 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-04-05mb/google/dedede/var/sasuke: Configure I2C times for touchpad/audioSeunghwan Kim
Configure I2C rise/fall time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (< 400 kHz). Measured I2C frequency just as below after tuning: I2C0(touchpad): 385 kHz I2C4(audio): 380 kHz BUG=b:180335053 BRANCH=dedede TEST=Build and check after tuning I2C clock is under 400kHz Change-Id: Ic92ee0379456e80260a8026bc38ee41325dad6d2 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-05mb/google/dedede: add lalala variantAaron Durbin
The Lalala variant is a design that differs only in replacing Cr50 with a discrete TPM part. BUG=b:184151664 Change-Id: I2f7abb9637cd5a13ac896396781b19feb156c948 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aseda Aboagye <aaboagye@google.com>
2021-04-05mb/google/dedede: add discrete TPM 2.0 configurationAaron Durbin
There are forthcoming designs that will be utilizing a discrete TPM 2.0 solution. Split the existing dedede configuration options so future mainboard variants can easily select the appropriate Kconfig option using the newly introduced options: - BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50 - BOARD_GOOGLE_BASEBOARD_DEDEDE_TPM2 The existing variants all select the former option, BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50 since all those designs currently utilize Cr50. BUG=b:184151664 Change-Id: I2bdb1ca4fd78cc0628256d49678ea042c55f6fba Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52030 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aseda Aboagye <aaboagye@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05mb/google/brya: Enable south XHCI ports 1 and 2Furquan Shaikh
FSP v2081 has a bug where it uses the information about south XHCI ports to enable TCSS XHCI ports. This change works around this bug by enabling south XHCI ports 1 and 2 in brya baseboard devicetree. brya0 already enables south XHCI port 1 in overridetree.cb, however, it is still enabled in baseboard/devicetree in case more variants are added to brya before FSP is fixed. BUG=b:184324979 TEST=Verified that TCSS XHCI ports 1 and 2 are now enabled. Change-Id: I4b86a98b18234ba309ddf2f30b80d78472951637 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-05nb/intel/sandybridge: Drop `pci_mmio_size`Angel Pons
There's no good reason to use values smaller than 2 GiB here. Well, it increases available DRAM in 32-bit space. However, as this is a 64-bit platform, it's highly unlikely that 32-bit limitations would cause any issues anymore. It's more likely to have the allocator give up because memory-mapped resources in 32-bit space don't fit within the specified MMIO size, which can easily occur when using a discrete graphics card. Change-Id: If585b6044f58b1e5397457f3bfa906aafc7f9297 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52072 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05sandybridge boards: Drop default `pci_mmio_size`Angel Pons
2 GiB is the default already. Change-Id: I294460949659c97d4e19ad4e9d14f8c3566cca3f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52071 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05nb/intel/ironlake: Drop `pci_mmio_size`Angel Pons
There's no good reason to use values smaller than 2 GiB here. Well, it increases available DRAM in 32-bit space. However, as this is a 64-bit platform, it's highly unlikely that 32-bit limitations would cause any issues anymore. It's more likely to have the allocator give up because memory-mapped resources in 32-bit space don't fit within the specified MMIO size, which can easily occur when using a discrete graphics card. Change-Id: I6cdce5f56bc94cca7065ee3e38af60d1de66e45c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52070 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-02mb/google/zork/vilboz: Fix audio test failure on LTE SKUJohn Su
Use board id to switch acp_i2s_use_external_48mhz_osc enable. BUG=b:181720406 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I085c39accd82bf72e4ebbc0394382ed4a7d4e901 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-04-02mb/intel/adlrvp: Update VBT filenamesTim Wawrzynczak
These files were just renamed to put `adlrvp` in between `vbt` and the memory technology type. Change-Id: Icefbac462d0ec9c660541e9cf44686d6dcf82dfd Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52032 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-02mb/google/guybrush: Enable early EC Software SyncKarthikeyan Ramasubramanian
BUG=None TEST=Build and boot to OS in Guybrush. Ensure that the EC Software Sync is complete. Change-Id: Id8655b6f805e14ce3cb71777c1cc175f45841fcc Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-02mb/google/guybrush: Add Elan Touchpad configurationKarthikeyan Ramasubramanian
Enable Touchpad by configuring the enable GPIO to logic high. Add touchpad configuration for ELAN touchpad. BUG=b:182207444 TEST=Build and boot to OS in Guybrush. Ensure that the trackpad events are detected using evtest. Change-Id: Ib47fbb33f2b181eb85f6ded98a5b0ce08fbc7b64 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51962 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-02mainboard/google/brya: Disable touchpad as S3 wake sourceBoris Mittelberg
This change disables touchpad interrupt, as it sends spurious wake signal via GPP_F14 and immediately wakes the system from S3. It happens because touchpad's power is gated by deassertion of PLTRST#. The behaviour for S0ix is unchanged. BUG=183738135 TEST=manually Signed-off-by: Boris Mittelberg <bmbm@google.com> Change-Id: Ia7d282f38d205a94cc43eaa1832729f4606437c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51831 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-02mainboard/google/brya: Enable tight timestampBoris Mittelberg
This change exposes the PCH_INT_ODL line in GPP_F17 as interrupt resource for CREC device BUG=none TEST=manual test Signed-off-by: Boris Mittelberg <bmbm@google.com> Change-Id: I0c05160cb7894b5f7beee93a0c93776f973eae56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-02mb/google/brya: change reset signal for GPP_F17 from PLTRST to DEEPBoris Mittelberg
PCH_INT_ODL (GPP_F17) is used to wake AP from S3, however it was configured to reset state on PLT reset assertion. This change reconfigures the pad using DEEP instead of PLTRST to retain pad configuration across S3. BUG=b:178545523 TEST=manual: verified that asserting PCH_INT_ODL wakes system and the wake source is GPP_F17 Signed-off-by: Boris Mittelberg <bmbm@google.com> Change-Id: I8df5dafedabc7b6af74c39621f0e1eb7019a9a17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-02mb/hp/snb_ivb_laptops: Remove undefined variable in cmos.defaultBill XIE
There is no "volume" defined in cmos.layout now, so removing "volume=" from cmos.default, otherwise building will fail with CONFIG_USE_OPTION_TABLE set. Change-Id: I1d6bb68fb927882ddcc052b432bb34b42c58eac7 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Iru Cai (vimacs) <mytbk920423@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-01google/trogdor: Don't build for rev0 by defaultJulius Werner
We've mostly stopped using Trogdor-rev0 now and are starting to bring up rev2 instead. Therefore, the default revisions this builds for should be the newer ones. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ie433ebb2a03fb1636b5012b4a0567ba6f982579d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52007 Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-01google/grunt: Add ALC5682 ACPI I2S machine driverKevin Chiu
The is used for AMD Grunt board which uses ALC5682 and MAX98357 codec. kernel driver will need to retrieve MISC FCH memory resource for CLK enabling per different CID/HID. BUG=b:171755306 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I5f29a2d784a9fc749fff61a9c96c0a487b71a2d7 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51659 Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-01mb/google/dedede/var/lantis: Configure Acoustic noise mitigation UPDsTony Huang
Enable Acoustic noise mitigation for lantis and set slew rate to 1/4 which is calibrated value for the board. Other values like PreWake, Rampup and RampDown are 0 by default. BUG=b:183561593 BRANCH=dedede TEST=EE verify acoustic noise test passes. Change-Id: I5e5f24ed934910726c220678068d085b6ee2bcf6 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51762 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-01mb/google/guybrush: Add IRQ numbersRaul E Rangel
BUG=b:183737011 TEST=cat /proc/interrupts and see i2c controllers and gpio controller listed Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5b2f23b2c2a7c4cec198276814d80f545e85aa41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-31mb/google/guybrush: Enable VBOOT_LID_SWITCHRaul E Rangel
Needed so get_lid_switch will actually call the EC. Otherwise it returns -1. BUG=b:183524609 TEST=Depthcharge no longer halts complaining that coreboot didn't sample the pin Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4639b3713d726192e251dcffa14381dd92518fa2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-31mb/google/guybrush: Switch eSPI to 16 MHzRaul E Rangel
It looks like we are having SI issues on eSPI at 33 MHz. Switching to 16 MHz makes everything a lot more stable. BUG=b:183524609 TEST=Boot to OS and run `ectool version` 1000 times and see no problems. Before with 33 MHz there was an error every few cycles. declare -i i=0; while ectool version; do i+=1; echo "$i"; sleep .11; done; echo "Finished: $i" Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6ab515629703a157c1d1ac6adcf5cf379e80f8ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/51953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-03-31mb/google/zork/vilboz: set the eDP phy overriden for WWAN SKUChris Wang
Move the eDP phy overridden to variant for WWAN SKU. BUG=b:171269338 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I0400e8f78b152f260c632fba3cfa43aeca2f6776 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-31mb/ti/beaglebone: Fix MMAP_HELPER API usageNico Huber
This replays the changes made in commit 9b1f3cc6fb (cbfs: Pull handling of the CBFS_CACHE mem_pool into CBFS core) for the latest work on the BeagleBone port. I hope it's the right thing to do. Fixes: Makes `master` compile again. Change-Id: Ia51c66dbe425a662ea2a6b2527b2b6982f587891 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51943 Reviewed-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-31mb/google/kukui/var/cozmo: Add RAM ID tableLucas Chen
Add the RAM ID table offset 0x30 for cozmo. BUG=b:182776048 BRANCH=kukui TEST=emerge-jacuzzi coreboot Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: Ia29d38f61975c5e29a901adbfad343153628405f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51845 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30mb/ti/beaglebone: Initialize DDR3Sam Lewis
Adds initialisation of 512MB of DDR memory on the BBB to the romstage. The parameters for the DDR peripherals are taken from U-Boot. TEST: Booted from romstage into ramstage. Also successfully managed to run the "ram_check" in lib.h. Change-Id: I692bfd913c8217a78d073d19c5344c9bb40722a8 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-30mb/ti/beaglebone: Load romstage/ramstage from SDSam Lewis
Adds a "sd_media" boot_device to allow booting from the SD card. This assumes that the generated "MLO" file is placed at a 128KB offset from the start of the SD card, to allow for the MBR etc. to be at the start of the SD card. Placing the MLO file here allows the AM335x boot ROM to load and execute the bootblock stage as well, as 128KB is one of the offsets the boot ROM checks when looking for the next stage to execute. As part of this, a FMD for the Beaglebone has also been defined. It's sized at 32M somewhat arbitrarily, as SD cards could allow for much bigger payloads. TEST: Beaglebone boots from bootblock into romstage. Romstage to ramstage still doesn't work as it needs RAM initialization first. Change-Id: I5f6901217fb974808e84aeb679af2f47eeae30fd Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44385 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-29mb/amd: majolica,mandolin: Remove needless article from warningPaul Menzel
At the end of the built, the line below is printed. coreboot has been built without an the Microchip EC FW. Remove *an*, as one article is enough. Change-Id: I28b24f0f2dade17e30e16cc6d935976e331a7a97 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-29soc/amd/picasso: factor out UPD-M configuration from romstageFelix Held
Move the parts of romstage.c that populate the UPD-M data structure to the newly created fsp_m_params.c file. Since platform_fsp_memory_init_params_cb gets called from the FSP driver and not directly from car_stage_entry the two code parts in romstage.c weren't directly interacting. Since soc/romstage.h only contains the mainboard_updm_update function prototype, rename it to soc/fsp.h. This patch also removes a few unused includes. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I52c21f13520dbdfab37587d17b3a8a3b1a780f36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-29mb/google/guybrush: select DISABLE_KEYBOARD_RESET_PINFelix Held
Now that we have the DISABLE_KEYBOARD_RESET_PIN Kconfig option, select it and remove the temporary workaround that was implemented in the mainboard code in commit 39ef89033624a2d14b0c77cdbdf287dd7d7059e1. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I634d11290dad8c93f10979f06243b1bf84737ae2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-29mb/google/guybrush: Enable DISABLE_SPI_FLASH_ROM_SHARINGRaul E Rangel
Guybrush uses GPIO67 as an input. BUG=none TEST=Boot guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I10068bb6870b2cb96033cf3893cde71db5c1d709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51781 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/boten: Fix DPTF passive and critical policiesStanley Wu
Thermal sensor2 defined in baseboard do not exist in boten. With the format the DPTF policies are defined in boten, all the entries from the baseboard are included and then the overrides applied. This causes the non-existent DPTF devices to be exported in the ACPI table and in turn OS reading invalid temperatures. Fix the format for DPTF passive and critical policies. BUG=None BRANCH=dedede TEST=Build and boot to OS in boten. Ensure that the DPTF entries look correct in both static.c and SSDT tables i.e. passive and critical policies for applicable devices only are present. Change-Id: I63c781e0a439f1e7a3525fa7cf290fa9300cb066 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-03-28mb/google/zork: update stamp_boost parameter for gumbozKevin Chiu
Original Stamp_boost parameter will cause boost time over 2500sec(3960sec) To pass balance performance and skin temperature test, decrease stamp_boost: 2500 -> 1640 BUG=b:182753072 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test Change-Id: I43c104ef912aafecadf9497f9ea20c8478c0e920 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-28mb/purism/librem_14: Move/fix touchpad interrupt GPIOMatt DeVillier
On production boards, the touchpad interrupt line was moved from GPP_B20 to GPP_B3. Fix the GPIO pad config and devicetree entry, and update documentation to remove touchpad config issue. Change-Id: Iaefeba8f78c567b67e7a416c27299bff574c23ab Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51797 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28soc/intel/tigerlake: Move TCSS code to intel/common/blockTim Wawrzynczak
The Type-C subsystem ("TCSS") IP block is similar between TGL and ADL. For pre-boot purposes, the limited amount of functionality required appears to be common between the two, therefore move the functionality to intel/common/block and rename from `early_tcss to `tcss` along the way. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I1c6bb9c7098691f0c828f9d5ab4bd522515ae966 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51753 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/blipper: Enable ALC1015 AMP (Auto Mode) driverlizhi7
Enable gpio mode driver for ALC1015 AMP Auto Mode. BUG=b:181732574 BRANCH=dedede TEST=ALC1015Q-VB drive speaker OK Signed-off-by: lizhi7 <lizhi7@huaqin.corp-partner.google.com> Change-Id: Idc5b190fc2c30689feaf08229b2a75c69894ac5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51763 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/storo: Enable ALC1015 AMP (Auto Mode) driverlizhi7
Enable gpio mode driver for ALC1015 AMP Auto Mode. BUG=b:177868812 BRANCH=dedede TEST=ALC1015Q-VB drive speaker OK Signed-off-by: lizhi7 <lizhi7@huaqin.corp-partner.google.com> Change-Id: Ic7deb9be6444d85d32ff94ce8e4a140dbdea349e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-28mb/google/dedede/var/storo: Configure I2C times for I2C devicesTao Xia
Configure I2C high / low time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (400 kHz). Measured I2C frequency just as below after tuning: touchpad:371.63 kHz touchpanel:368.24 kHz audio codec RT5682:369.13 kHz speaker AMP L:366.21 kHz speaker AMP R:365.8 kHz P-sensor:368.34 kHz MIPI Camera:363.35 kHz BUG=b:181589325 BRANCH=dedede TEST=Build and check after tuning I2C clock is under 400kHz Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I1a755a54540e106b41ac427f84989ed7e8037558 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51624 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/zork: update telemetry settings for gumbozKevin Chiu
update telemetry to improve the performance. BUG=b:182753072 BRANCH=zork TEST=1. emerge-zork coreboot 2. run AMD SDLE stardust test => pass Change-Id: I6e4d0c6fcd740d82edf073fb307aa6a6b09ec78a Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51790 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/caroline: Re-enable I2C2 / fix digitizerMatt DeVillier
Caroline has a Wacom W9013 digitizer on I2C2, which was incorrectly disabled in commit d957d12e6 [mb/google/glados: clean up variant devicetrees] as part of preparation for converting to overridetree format. Test: build/boot, verify digitizer now available under Linux Change-Id: I234bc0126b5d13c22a663d6544382890b312ce63 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-28mb/intel/adlrvp_m: Enable ADL-M RVP LP5 memory configurationMaulik V Vaghela
List of changes: 1. Add correct board Id for ADL-M LP5 configuration 2. Add spd hex files for LP5 Micron part 3. Update memory.c file with correct Dq-dqs and byte mapping for LP5 BUG=None BRANCH=None TEST=Build is successful for ADL-M RVP Change-Id: I0bbd3f5b56bf7fbe918cc599d32a01dcae896ddd Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2021-03-28mb/intel/adlrvp_m: Enable ADL_M RVP LP4 memory configurationMaulik V Vaghela
List of changes: 1. Add board Ids for ADL-M LP4 configuration 2. Add spd hex files for LP4 configuration 3. Update memory.c file with correct Dq-dqs and byte mapping for LP4 BUG=None BRANCH=None TEST=Build and boot is successful for ADL M LP4 RVP Change-Id: Id817faee3fff2a8a911ebda35774dfb6ddc5524b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50257 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/intel/adlrvp: Configure GPIOs for ADLRVP-MVarshit Pandya
List of changes: 1. Add separate file for ADL-M GPIOs 2. Configure GPIOs as per the schematics of ADL-M RVP TEST=Able to build ADL-M Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I03a532f69f42db723b976a0f7b0acf6f4b98e354 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2021-03-28mb/intel/shadowwmountain: Enable CSE Lite SKU for shadowmountainSridhar Siricilla
During the initial phases, the development and validation teams have to deal with both Consumer SKU and Lite SKU firmware. Having the support for CSE Lite enabled by default in coreboot helps in integrating both the SKUs. With this we only have to interchange the CSE region in the full BIOS image without having to worry about Kconfigs. Eases the build and integration flow. TEST=Verified build for Shadowmountain Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2ebf4da1b8c1df2e9c43b6e3bb688a9f8db652d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51496 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/intel/adlrvp: Enable CSE Lite SKUSridhar Siricilla
During the initial phases, the development and validation teams have to deal with both Consumer SKU and Lite SKU firmware. Having the support for CSE Lite enabled by default in coreboot helps in integrating both the SKUs. With this we only have to interchange the CSE region in the full BIOS image without having to worry about Kconfigs. Eases the build and integration flow. TEST= Built and booted on ADL-P LP4 RVP Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ia92c7b71c69a23104ace9fc53fd39f01120fa751 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51567 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/sasuke: Add support zinitix touchpadSeunghwan Kim
This change adds support zinitix touchpad for sasuke. BRANCH=dedede BUG=None TEST=built and checked touchpad worked on sasuke Change-Id: I85794311c49e33c4683482e125bea5ca2dbacfa8 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-28grunt/barla: add Realtek ALC5682 codec supportKevin Chiu
ALC5682 i2c address: 0x1A BUG=b:171755306 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I8bc571104bebe02acf86507774580effc808beb6 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-28mb/google/kukui: fine tune the data lane trailJitao Shi
ANX7625 requires customized hs_da_trail time. So override the data trail for ANX7625. BUG=b:173603645 BRANCH=kukui TEST=Display is normal on Jacuzzi Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I620035363507daaa19e3c272a44059c17be29af1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org>
2021-03-27mb/intel/dcp847ske: Drop useless MCHBAR writesAngel Pons
There's no need to write the GDCRTRAININGRESULT registers after raminit. Change-Id: If604920fe7a3bee96f72f8aff5e96f0e25548f18 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50534 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-27mb/intel/adlrvp: Allow GPIO PM override to disable dynamic GPIO PMSubrata Banik
This patch allows overriding GPIO PM miscconfig register for each GPIO community to avoid dynamic clock gating. TEST=Dump GPIO Community MISCCFG register to ensure all Bit [7:0] are set to '0'. Change-Id: I9aca9cb0641e2731c028ea5ed76c563da3400b74 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-27soc/intel: Rename and move MISCCFG_GPIO_PM_CONFIG_BITS definition to soc/gpio.hSubrata Banik
Lists of changes: 1. Rename MISCCFG_ENABLE_GPIO_PM_CONFIG -> MISCCFG_GPIO_PM_CONFIG_BITS 2. Move MISCCFG_GPIO_PM_CONFIG_BITS definition from intelblock/gpio.h to soc/gpio.h. Refer to detailed description below to understand the motivation behind this change. An advanced GPIO PM capabilities has been introduced since CNP PCH, refer to 'include/intelblock/gpio.h' for detailed GPIO PM bit definitions. Now with TGP PCH, additional bits are defined in the MISCCFG register for GPIO PM control. This results in different SoCs supporting different number of bits. The bits defined in earlier platforms (CNL, CML, ICL) are present on TGL, JSL and ADL too. Hence, refactor the common GPIO code to keep the bit definitions in intelblock/gpio.h, but the definition of MISCCFG_GPIO_PM_CONFIG_BITS is moved to soc/gpio.h so that each SoC can provide this as per hardware support. TEST=On ADL, TGL and JSL platform. Without this CL : GPIO COMM 0 MISCCFG:0xC0 (Bit 6 and 7 enable) With this CL : GPIO COMM 0 MISCCFG: 0x00 (Bit 6 and 7 disable) Change-Id: Ie027cbd7b99b39752941384339a34f8995c10c94 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-26mb/google/zork/vilboz: Enable ALC1015 AMP driverFrank Wu
Enable ALC1015 driver for audio support in vilboz BUG=b:177971830 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage, then verify with ALC1015 AMP Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: If0abfd6570579fe637a7bef31de2f01d58f3bdf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-03-26mb/intel/shadowmountain: Disable the unused CPU PCIe RPV Sowmya
This patch disables the unsued CPU PCIe RP for shadowmountain. TEST= Boot shadowmountain and verify the device is disabled. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: Ide2badb06178fca8ff5cf51d8573a14635e190cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/51772 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-26mb/intel/adlrvp: Remove static VBT stitchingMaulik V Vaghela
Currently, we used to stitch extra VBT files to ADLRVP build using Makefile. With enablement of emerge build, we should be able to integrate more than 1 VBT binaries using ebuild. This removing these lines to avoid compilation issues in emerge builds BUG=None BRANCH=None TEST=Check if compilation passes on emerge build. Stitched additional VBT files using emerge and checked that coreboot picks up correct VBT. Change-Id: I69f1cc6c07415515ff85180fdd7cc5de11b4d805 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-03-26mb/google/brya: Update ddr configSubrata Banik
Fixed ddr config to override the FSP default value. BUG=b:182772421 TEST=Built image and passed memory training. Without this change: RcompTarget on Lpddr4x = { 40, 40, 30, 30, 30 } With this change: RcompTarget on Lpddr4x = { 40, 30, 30, 30, 30 } Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Ib07ff36496828b5de78ed928b294a400ad08865f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-26soc/intel/alderlake: Add provision to override Rcomp settingsSubrata Banik
Add function to allow overriding the RcompResistor and RcompTarget UPDs from mainboard if required. Mainboard users can pass required rcomp from memory.c file. Refactor ddr_config structure to take out rcomp related variable outside for all memory type to override if required. BUG=b:182772421 TEST=Able to override the default RcompResistor and RcompTarget values. Change-Id: Ie8528bbf0517728534d47f9adaabfc9a2c469609 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-26soc/intel/alderlake: Align RcompResistor definition as per MRCSubrata Banik
List of changes: 1. Alder Lake MRC is expecting a RcompResistor value of word width. Reference RCOMP resistors on motherboard are ~ 100 Ohms but coreboot is passing an array of RcompResistor which is not completely in use. Note: Rcomp resistor value represents rcomp resistor attached to the DDR_COMP pins on the SoC. 2. Also, remove usage of '&' with memcpy the required value into RcompTarget array. 3. Also, update RcompResistor value for ADLRVP. BUG=b:183341229 TEST=Enable FSP debug log to verify the override value for RcompResistor is reflecting correctly. Change-Id: I69c7cec55b65036fc039c33374a3fd363ef7004e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-25mb/amd/majolica: Enable IO port 2E/2FZheng Bao
MEC1701 can be accessed by IO port 2E/2F Change-Id: I31f1b147476ec487e64f3c30b3cf514b45ced416 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-25mb/google/zork/variants/baseboard: USB2 HS phy settingsJulian Schroeder
Set default USB2 HS disconnect threshold to maximum to avoid false disconnects that eventually lock up the xHCI controller BUG=b:174538960 TEST=suspend_stress_test -c 50 on vilboz and morphius. Sample set of USB2 HS devices connect and disconnect successfully Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: Ic921d850a0bdd717a2a7e50e9e6f65e39e0607bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/51265 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25mb/google/hatch/var/genesis: Fix PCIe root portsJoe Tessler
The previous "PCIe port" numbering was incorrect and resulted in several PCIe devices failing to enumerate. With lane reversal, these numbers are all backwards. This explains the confusing mapping of Clock Source #1 to Root Port #9 in https://review.coreboot.org/c/coreboot/+/50101. We were confusing "Root Port" vs "PCIe Lane". This change addresses the port vs. lane confusion in the device tree configurations. It also adds more detailed documentation to a future reader (i.e., me) to avoid this blunder. BUG=b:181633452,b:181635072,b:177752570 TEST=build AP firmware; flash device BRANCH=none Change-Id: I47edf0b0af1bdcf86b89f17ad2a1f128ef9e9f7a Signed-off-by: Joe Tessler <jrt@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-25mb/google/hatch/var/genesis: Add missing GPIOsJoe Tessler
After revisiting the genesis GPIO table and schematics for EVT closure, I discovered several missing and/or incorrectly documented GPIO pin mappings. Now the GPIO pin names and functions should match what's written in the latest schematics. BUG=b:181633452,b:181635072,b:177752570 TEST=build AP firmware; flash device BRANCH=none Change-Id: I73e6733bce761b00717091834c7a49e85154f80b Signed-off-by: Joe Tessler <jrt@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51677 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25nb/intel/haswell: Decouple mainboard USB config from MRCAngel Pons
With this change, only raminit.c uses pei_data.h definitions. With MRC cornered, making it optional is just a matter of writing a replacement. USB config definitions will be moved to Lynx Point code in a follow-up. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4bc405213e9b0828d9ced18677335533c7dd381d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-25mb/google/volteer: Collis: Update SPD tableFrankChu
Add memory table to "mem_list_variant.txt", and command to generate files: go run ./util/spd_tools/lp4x/gen_part_id.go src/soc/intel/tigerlake/spd src/mainboard/google/volteer/variants/collis/memory/ src/mainboard/google/volteer/variants/collis/memory/mem_list_variant.txt DRAM Part Name ID to assign MT53D512M64D4NW-046 WT:F 0 (0000) H9HCNNNCRMBLPR-NEE 0 (0000) MT53D1G64D4NW-046 WT:A 1 (0001) H9HCNNNFBMBLPR-NEE 2 (0010) BUG=b:182227204 TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I773c65c0b6d5e868572530305ab8a61a0dd1532d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-03-25mb/google/dedede/var/cret: Enable touchscreenDtrain Hsu
Add ELAN and Weida touchscreen into devicetree for cret. BUG=b:180547621 BRANCH=dedede TEST=Build the cret board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Icdb7aabe4a9ecd7b5a057c4644799aa537adb6ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/51737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-25mb/google/dedede/var/cret: Configure I2C ports and touchpadDtrain Hsu
1. Support Elan touchpad. 2. Support JYT touchpad. 3. Follow schematic to disable I2C1 and I2C3. BUG=b:183454249, b:180547781 BRANCH=dedede TEST=Build the cret board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I8c150c3f65d0e057d5ba1b07ec1c20886f02ef6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51726 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25mb/google/dedede/var/cret: Generate SPD ID for supported partsDtrain Hsu
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1. H9HCNNNBKMMLXR-NEE 2. MT53E512M32D2NP-046 WT:F 3. K4U6E3S4AA-MGCR BUG=b:183057749 BRANCH=dedede TEST=Build the cret board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iacfdd9a27f126ba4b97d1a6493bcc09bb31454a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51619 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25mb/google/dedede/var/cret: Configure USB port settingsDtrain Hsu
Follow schematic to modify USB port settings. USB2 [0]: USB Type C Port 0 USB2 [1]: None USB2 [2]: USB Type A Port 0 USB2 [3]: LTE USB2 [4]: None USB2 [5]: Camera UFC USB2 [6]: Camera WFC USB2 [7]: Integrated Bluetooth USB3 [0]: USB Type C Port 0 (M/B side) USB3 [1]: None USB3 [2]: USB Type A Port 0 (M/B side) USB3 [3]: LTE BUG=b:182973703 BRANCH=dedede TEST=Build the coreboot image. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I80447d6ac3422f858a9022f550b4f42353819405 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-25mb/google/dedede/var/cret: Configure GPIODtrain Hsu
Follow schematic to modify some GPIO pins. GPP_C12 - NC Pin, UP_20K GPP_C18 - NC Pin GPP_C19 - NC Pin GPP_C22 - NC Pin, UP_20K GPP_D12 - NC Pin GPP_D14 - NC Pin GPP_D15 - NC Pin GPP_D19 - NC Pin GPP_D20 - NC Pin GPP_E0 - NC Pin GPP_E2 - NC Pin GPP_H1 - NC Pin GPP_H6 - NC Pin GPP_H7 - NC Pin GPP_G0 - NC Pin GPP_G1 - NC Pin GPP_G2 - NC Pin GPP_G3 - NC Pin GPP_G4 - NC Pin GPP_G5 - NC Pin, UP_20K GPP_G6 - NC Pin GPP_G7 - NC Pin BUG=b:183078393 BRANCH=dedede TEST=Build the cret board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Id966884f3e36303b636fa13ef9baecccae87604a Reviewed-on: https://review.coreboot.org/c/coreboot/+/51629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-24mb/purism/librem_mini: Drop superfluous devices from devicetreeMatt DeVillier
The 'device pci 00.0 on end' entries are not necessary for socketed devices unless a chip driver needs to be bound to a device, so remove them from the devicetree. Also remove the `drivers/wifi/generic` chip driver as it was not necessary either. Change-Id: Id5f2e34d98b236f9cfac9f0afd8a8017e349603f Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-24mb/google/guybrush: Temporary fix to set eSPI muxMathew King
This change allows guybrush EC communication while other patches in the SOC code are worked on. BUG=b:183149183 TEST=Boot guybrush with EC comunication Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I56fb64d4c065cf0665025346218cc66d77dacb52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51665 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-24mb/google/guybrush: disable KBRSTENKangheui Won
GPIO129 is muxed with KBRST, so setting GPIO129 to low causes reset when KBRSTEN is set to 1. Since reset value of KBRSTEN is 1 we need a logic to clear it. BUG=b:183340503 TEST=build Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I194e8432a14d6105f6bcf12111647f5aad4e2de2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-24mb/google/volteer/variants/drobit: Modify touchpad power sequenceWayne3 Wang
Modify power sequence of touchpad to meet the definition in the spec. BUG=b:178353432 BRANCH=firmware-volteer-13672.B TEST=build test firmware and verified by EE team. Change-Id: I8b8e383223d017223c36044efdf21738fe26d2ea Signed-off-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51514 Reviewed-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-24mb/emulation/qemu-q35: Fix format specifier for a `size_t`Benjamin Doron
Fix compilation on GCC 10.2.1 Change-Id: I47d29ef065f57f171f429bb6a368bc86e31acee9 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-24mb/system76/gaze15: Add System76 Gazelle 15Tim Crawford
Tested with TianoCore payload (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - Both NVMe ports - SATA port - All USB ports - Webcam - Ethernet - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - S3 suspend/resume - Flashing with flashrom - Booting to Ubuntu Linux 20.10 and Windows 10 Not working: - Discrete/Hybrid graphics This requires a new driver to work correctly, which will be added and enabled later. Change-Id: I10667fa26ac7c4b8eb67da11f3e963062bd0db47 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47822 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-24mb/intel/adlrvp: Enable CnviBtAudioOffloadUsha P
This change enables CnviBtAudioOffload. FSP is invoked to configure BT over USB and BT I2S pins for cAVS connection. BUG=None TEST=Verified BT offload working on ADL RVP Signed-off-by: Usha P <usha.p@intel.corp-partner.google.com> Change-Id: I1185a6c2295bae7d469be4da86502506adbeb8cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/51032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-03-24soc/mediatek: Use MRC cache API for asuradaYu-Ping Wu
Use the MRC cache API for asurada, and sync dramc_param.h with dram blob (CL:*3674585). With this change, the checksum, originally stored in flash, is replaced with a hash in TPM. In addition, in recovery boot, full calibration will always ne performed, and the cached calibration data will be cleared from flash. This change increases ROMSTAGE size from 236K to 264K. Most of the increase is caused by TPM-related functions. Add new API mtk_dram_init() to emi.h, so that 'dramc_parameter' can be moved to soc folder. With this CL, there is no significant change in boot time. Normal AP reboot time (fast calibration) is consistently 0.98s as before, so this change should not affect the result of platform_BootPerf. BUG=b:170687062 TEST=emerge-asurada coreboot TEST=Hayato boots with both full and fast calibration BRANCH=none Cq-Depend: chrome-internal:3674585, chrome-internal:3704751 Change-Id: Ief942048ce530433a57e8205d3a68ad56235b427 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-23mb/google/octopus: Wake up AP on AC plug and unplugDerek Basehore
This patch makes all Octopus variants resume from S0ix/S3 on AC plug and unplug. Change-Id: Iab054d77368bf2047b6d523188b8c401a7643aaa Signed-off-by: Derek Basehore <dbasehore@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-23haswell boards: Use zero length for disabled USB portsAngel Pons
For disabled USB ports, the length setting does not matter. In future commits, disabled USB ports will end up with length field set to zero. Change-Id: I7613e1b0c89c0b58eca790ca14fcd1633c8a93af Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2021-03-23nb/intel/haswell: Use unshifted SPD addresses in mainboardsAngel Pons
It's common to use the raw, unshifted I2C address in coreboot. Adapt mainboards accordingly and perform the shift in MRC glue code. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4e4978772744ea27f4c5a88def60a8ded66520e1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51458 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-23mb/google/kukui: Add a new config 'Makomo'Sunway
A new board introduced to Kukui family. BUG=None TEST=make # select Makomo BRANCH=kukui Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: I42b84e2c0926e755ba210fc8baac19f8ed2c4e57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51565 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-23mb/google/volteer/variants/delbin: Disable PmcUsb2PhySusPgEnableRavi Sarawadi
eDP panel flicker during system idle state is observed. Disabling USB2 SUS well power gating can remove flicker symptom. Please refer to doc#634894 for more details. BUG=b:182323059 BRANCH=None TEST=Boot and confirm no display flicker. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Icadf9c494fab82b219317c3ca3b04f633b543083 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2021-03-22mb/google/volteer/variants/eldrid: Include SPD for H4AAG165WB-BCWENick Vaccaro
Add SPD support to eldrid for DDR4 memory part H4AAG165WB-BCWE. Eldrid should use DRAM_ID strap ID 4 (0100) on SKUs populated with H4AAG165WB-BCWE DDR4 memory parts. BUG=b:181732562 TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds successfully. Change-Id: I38cfe3eb26b00563ce17df3a3ac2a0a846f2ae00 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51667 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22mb/google/dedede: Create cret variantIan Feng
Create the cret variant of the waddledoo reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:181325655 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_CRET Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I700201cf81b25c6776df3ec9fc843cd9bd8c88c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-03-22mb/google/volteer/variants/copano: Configure specific DPTF parametershao_chou
Configure board specific DPTF parameters for copano BUG=b:176961219 BRANCH=firmware-volteer-13672.B TEST=build and verify by thermal team Change-Id: Ibce67f81503b84b58798bc198947e61907276ad3 Signed-off-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51561 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22purism/librem_14: add on-board LAN deviceMichael Niewöhner
On-board devices should be present in the devicetree, so that `.on_mainboard` field of `struct device` is `1`. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I3678514482724377bcdfcbdc7f2c5b312a48b2c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-03-22mb/asus/p2b: Refactor southbridge ACPI stuffKeith Hui
Move (remaining) southbridge ACPI stuff into one file under sb/intel/i82371eb, that is simply included from the board's \_SB scope. Change-Id: Ibed49a800dec19534761e5ab22a6cbb1e6bd4a5d Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-22lynxpoint/broadwell: Rename LP GPIO config globalAngel Pons
Do not use the same name as the non-LP GPIO config. This allows checking at build-time that a mainboard uses the correct GPIO config format. Without this commit, there are no build-time errors when using the wrong format of GPIO config, but there would be undefined behavior at runtime. Tested by trying to build asrock/b85m_pro4 and hp/folio_9480m after toggling the `INTEL_LYNXPOINT_LP` Kconfig option (and trimming down the USB config arrays for asrock/b85m_pro4). In both cases, building failed because the necessary GPIO config global is not defined, as expected. Change-Id: Ib06507ef8179da22bdb27593daf972e788051f3a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51661 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22mb/google/zork: Enable SSFC as upper 32 bit of fw_configFrank Wu
To append SSFC to top 32 bits of fw_config. BUG=b:177971830 BRANCH=firmware-zork-13434.B TEST=Build coreboot and get the value of SSFC. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Iab1596f1cc8fbbf45e6a9269351bf422a43f3583 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51655 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22mb/google/brya: Enable S0ixSugnan Prabhu S
This change enables S0ix for brya platform. BUG=b:181843816 TEST=Built image and booted to kernel. Change-Id: Idc6f7fce9779ef4458375becebf5dc65b228abeb Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51526 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22mb/google/dedede/var/storo: Add USB Port ConfigurationZanxi Chen
Add USB Port configuration into devicetree for storo BUG=b:177389444 BRANCH=dedede TEST=built firmware and verified USB3.0 function is OK Change-Id: I1527c7178ffac9b2322eb65aab6e2086d949e47c Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-22mb/google/zork: Move max98357a out of baseboardEric Lai
Not all of dalboz variants support the this amp. Thus, move out of baseboard. BUG=b:182815488 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If708574f5fb18dd3b4f2ef978529a16a40d5dc0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-03-22mb/google/guybrush: Enable AP <-> H1 communicationKarthikeyan Ramasubramanian
Configure H1 I2C and Interrupt GPIOs during the early initialization. Add devicetree configuration for H1 device and enable the required config items. BUG=b:180528902 TEST=Build Guybrush mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I040a5e6101bab0c7425d7b6cc6fbed3b479a5a44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-22mb/google/guybrush: Add initial I2C configurationKarthikeyan Ramasubramanian
Add I2C peripheral reset configuration required during early init. Enabled I2C generic and HID drivers. I2C GPIOs are configured as required in CB:50091. BUG=b:180531661 TEST=Build guybrush mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I67690fbd25639879a730260aaca4cddb5e47bbc7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-22mb/amd/majolica: Set IOMUX to enable I2C2 & I2C3Zheng Bao
Change-Id: I142c06c150214d58acc04b8c6b3b027fff0256db Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-03-22soc/amd/common/block/i2c: Move SoC agnostic parts into commonKarthikeyan Ramasubramanian
The logic behind I2C bus initialization, I2C MMIO base address getter and setter, I2C bus ACPI name resolution are identical for all the AMD SoCs. Hence moving all the SoC agnotic parts of the driver into the common driver and just configure the SoC specific parts into individual I2C drivers. BUG=None TEST=Build Dalboz and Grunt. Boot to OS in Dalboz. Ensure that the I2C peripherals are detected as earlier in Dalboz. Verify some I2C peripheral functionality like trackpad and touchscreen. Change-Id: Ic9c99ec769d7d8ad7e1e566fdf42a5206657183d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Suggested-by: Kyosti Malkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51509 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-20mainboard/: Register chipset_lockdown on xeon_sp mainboardsMarc Jones
Set chipset_lockdown in devicetree for recommended security settings. Change-Id: Ie27450dd32463243b1456932a1d39d40afa81da1 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51388 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-20mb/purism/librem_cnl: Add new board/variant Librem 14Matt DeVillier
Add support for the CometLake-U based Librem 14 laptop. Change-Id: I24a2a92091cc272638ecaf8ea23a896cab8a7153 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51549 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-20google/trogdor: Add new variant MarzipanKevin Chiu
This patch adds a new variant called Marzipan that is identical to Lazor for now. BUG=b:182181519,b:182018606 BRANCH=master TEST=make Change-Id: I92b667c63b0a06255d1e9511d7486293d8b4426a Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 22:41:06 +0000