| Age | Commit message (Collapse) | Author |
|---|
|
Add GPIO initialization and ACPI generation for tables
BUG=b:214415303
TEST=builds
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I8f9c7d3f2fdbd5d791032637dbf97c18864ee9e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62044
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The power rails discharge time of brask has been measured, the longest
discharge time of the power rails are smaller than 150ms so it is safe
to set the pwr_cyc_dur to 1 second. Since the brask is derived from the
brya, we could apply the same setting from the brya. The setting is
copied from commit dee834aa.
BUG=b:214454454
BRANCH=firmware-brya-14505.B
TEST=`test_that firmware_ECPowerButton` passed.
Change-Id: I5e5eebb79e99a52fc3e4128213c6986f20100b8d
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The mainboard_memory_init_params takes the struct FSP_M_CONFIG as the
input which make the board has no chance to modify data in the
FSPM_UPD, for example, set FspmArchUpd.NvsBufferPtr = 0. After changing
the FSP_M_CONFIG to FSPM_UPD, the board can modify the value based on
its requirement.
BUG=b:200243989
BRANCH=firmware-brya-14505.B
TEST=build pass
Change-Id: Id552b1f4662f5300f19a3fa2c1f43084ba846706
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
- Add configurability using FW_CONFIG field in CBI, to enable/disable
I2S codec support for MAX98373 codecs
- AUDIO=ADL_MAX98373_ALC5682I_I2S: enable max98373 codec using expansion
board
Bug=None
Test=With CBI FW_CONFIG set to 0x100, check I2S audio output on
expansion card
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I94dfe500b99a669e9b981cdf15e360f22f33d2ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I570f7de90007b67d811d158ca33e099d5cc2d5d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62308
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both the HPET_BASE_ADDRESS define from arch/x86/include/arch/hpet.h and
the HPET_ADDRESS Kconfig option define the base address of the HPET MMIO
region which is 0xfed00000 on all chipsets and SoCs in the coreboot
tree. Since these two different constants are used in different places
that however might end up used in the same coreboot build, drop the
Kconfig option and use the definition from arch/x86 instead. Since it's
no longer needed to check for a mismatch of those two constants, the
corresponding checks are dropped too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia797bb8ac150ae75807cb3bd1f9db5b25dfca35e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62307
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lance Zhao
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable guybrush based platforms to send fuse spl command to PSP when
required.
BUG=b:180701885
TEST=On a platform that supports SPL fusing. Confirm that PSP indicates
fusing is required, and confirm coreboot sends command. Fusing is
required when the image is built with an SPL table requiring newer
minimum versions. A message indicating fusing was requested will appear
in the serial log. "PSP: Fuse SPL requested"
Change-Id: I7bce01513af4e613f546e491d9577c92f50cb85c
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Modify function to set default audio codec HID
to be original setting 10EC5682.
BUG=b:192535692
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I30fa886a39bd7082442a3a2b95fdf2d2b84ddd1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
BUG=b:218415722
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_VILLAGER -x -a -B
Change-Id: I84935ea280023cb0df1dd51fcd2a83d80db17710
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:214415401
TEST=builds
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I60b3b3cd50eea1253df2ae3e0aea83bb89e54702
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62042
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I23ec6bcb6a2b3627866165972fd6ba1c75367533
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62188
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I97f37c45ffe945e6bb071c8205343943edc524ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61871
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add GL9750 SD card reader support.
BUG=b:220987566
TEST=Build FW and check device function normally.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I8f6ca45a320d34dfd820ef0b6e0d3163fab26027
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:214415401
TEST=builds
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ieeda9aa0c18b5befea67d2849bd4114da0c348a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62041
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a mem_parts_used.txt for Crota, containing the
memory parts used in proto builds. Generate Makefile.inc and
dram_id.generated.txt using part_id_gen.
DRAM Part Name ID to assign
MT62F1G32D4DR-031 WT:B 0 (0000)
MT62F512M32D2DR-031 WT:B 1 (0001)
H9JCNNNBK3MLYR-N6E 1 (0001)
H9JCNNNCP3MLYR-N6E 0 (0000)
K3LKBKB0BM-MGCP 2 (0010)
BUG=b:215443524
TEST=emerge-brya coreboot
Change-Id: I0ff6ffea4b879b6e1287e1e3cb9fd36a80f52ed6
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch is to denote the correct side of ACPI _PLD usb C ports.
+-------------------------+
| LCD |
| |
| |
+-------------------------+
PORT_C2 | | PORT_C1
PORT_C3 | DB MB | PORT_C0
| |
+-------------------------+
BUG=b:220634230
TEST=emerge-brya coreboot
Change-Id: I84515f98b6cdab5768df75690b0f5ca1bb9ad96d
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add new memory MT53E2G32D4NQ-046 WT:C support
BUG=b:220821471
TEST=emerge-brya coreboot
Change-Id: I4c21254213c2107d015adebb510612e0256ffb5c
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add new memory MT53E2G32D4NQ-046 WT:C support.
BUG=b:220804962
TEST=emerge-brya coreboot
Change-Id: I3353d7c119798ebb0b5ee1ea32161e54b4eec826
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I8ad968da1771004f7f5869e5434473a498edeaa2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I273e29a26cf1c1ba34b95eb11bcb59a1360371e1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I9cce00e1634d62a63b3563d54a7a0c56058d0e39
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I0d9b07183b06915799f221390406e930ca253a0d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
While on it, use tab for indent.
Change-Id: I6cb0b4183db819d721f4882ab2168d22bcd664e3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Reconfigure the GPIO's so that they are configured correctly.
The original configuration was based on the AMI firmware, and
whilst it worked, it wasn't optimal.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I27ecf066685f2a81ac884a9f276c518544449443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Reconfigure the CNVi GPIO's so that they are configured correctly.
The original configuration was based on the AMI firmware, and
whilst it worked, it wasn't optimal.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9fc9963e91da0267c8740fee20a3ec41895b4953
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Update trackpad GPIO to avoid IRQ Storm, that causes high power
consumption when idling or in S3.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieee27bd9079617ab95f4f1e27ef98b49e89e5b41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Configure the TPM IRQ GPIO for TGL (StarBook Mk V) so that the
hardware TPM can be used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ife88075e70184b46e69f2e24c70b85ec254edd64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60756
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't configure ESPI GPIOs as the default values are correct.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I052fbfccd075d19340d3e27ad0c62965c80badaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth - Personal <martinroth@google.com>
|
|
Rework edkii makefile so that the various build options are
unified between CorebootPayloadPkg, uefipayload_202107 and
upstream.
This sets the project directory based on the git repository name
i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox
Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit
ID without a branch.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Martin Roth - Personal <martinroth@google.com>
|
|
On mc_apl2 the external RTC is connected to I2C bus 3. All other I2C bus
devices (16.0, 16.1 and 16.2) have been disabled as they are not used.
While coreboot can handle the case where a PCI device does not have
function 0 enabled but a later one (here function 3), Linux seems to
check for function 0 first and ignores the rest if function 0
is missing. So enable PCI device 16.0 in order to let Linux use 16.3
again.
Test=Boot into Linux and make sure that PCI device 16.0 and 16.3 are
visible and I2C attached RTC works properly.
Change-Id: I55a748b6de8128f4b26b908118feff9f06d3fb7c
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Modify function to set default audio codec HID
to be original setting 10EC5682.
BUG=b:204517112
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ic37e7e6757476f1d30bea31fcde4deebebd488a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Modify function to set default audio codec HID
to be original setting 10EC5682.
BUG=b:204523176
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I36e35522aba2463124b7e6e7046b1a56758b534d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Modify function to set default audio codec HID
to be original setting 10EC5682.
BUG=b:218245715
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I30a1fe2ef8d750616f6907f86a5329f035920504
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add the information of substance and instance in the string for PMUI
and PMUD. It is amdfwtool's job to extract the number from the string.
Change-Id: I43235fefcbff5f730efaf0a8e70b906e62cee42e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Based on the nivviks and nereid schematics, nissa is using eMMC HS400
mode, so enable this in devicetree.
BUG=b:197479026
TEST=Build test nivviks and nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ie9772385276d3629079b95024d3ffa04438f22c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Only the info about the location of the EC firmware will be stored right
at the beginning of the flash, so the size can be reduced to 4kByte
which is the erase block size of the flash. The CHAUSIE_MCHP_SIG_FILE
file itself is smaller than this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icde5f7071183cd8423fc022caf49e2c9ee288527
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62189
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Need to tune I2C bus 0/1/3/5 clock frequency under the 400kHz for
audio, TPM, touchscreen, and touchpad.
Audio CLK: 385 kHz
TPM CLK: 380.5 kHz
Touch Screen CLK: 373.3 kHz
Touch Pad CLK: 372.7 kHz
BUG=b:218577918
BRANCH=master
TEST=emerge-brya coreboot chromeos-bootimage
measure by scope with felwinter.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I3e5cc10d6605f9cc41fa6b31da07a81364b72fe0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Move the EC to a location that does not conflict with where the main
CBFS is in the chromeos FMAP
Change-Id: I28c84cbe2ff10d45383d896ae4f942ee49eb15c0
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62190
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update devicetree according to schematics.
TEST=Build and boot Alder Lake N RVP.
Change-Id: I9faee1cb3539a0246fc6a87e15b3150533de1ee5
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
On Sabrina SoCs the size of the APOB has increased, so the size of the
RW_MRC_CACHE FMAP sections needs to be increased in order for the data
to still fit in the corresponding FMAP partition.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib31b918aba90dd507b47aec9e1f75c138857cd02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62155
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unecessary delay in RTD3 _ON Method after PERST# dessartion.
TEST:
2022-02-10T18:22:53.204391Z INFO kernel: [ 0.190287] ACPI: Power Resource [RTD3] (on)
2022-02-10T18:22:53.204395Z INFO kernel: [ 0.194252] ACPI: Power Resource [RTD3] (off)
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I9bc36af6e6c944fcd3de23b7d49640ad9d25642d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Disable unused USB2/TCSS Ports.
BUG=b:217238553
TEST=FW_NAME=redrix emerge-brya coreboot
Change-Id: I1cdee5b6dc56accb52ba1bf636bdf753a7bfd199
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I61f8f39ce7651d499756f4975840f32f89b04ca7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Follow thermal team design to remove TSR3 sensor and update thermal
table for next build. The DPTF parameters were verified by thermal
team.
BUG=b:219690502
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I0e34fabe546b6eabb3d3adad583668a15a1d908b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
The CIO2 port was incorrectly set to 2, while the correct port is 1
BUG=b:210801553
TEST=Build and boot on vell, camera works correctly now
Change-Id: I53d8448ed0e12777456af9b0bc65a04595b47e37
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61946
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1e0b51ee4db73bdff79365d4954a3245a430f140
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62051
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9e4837489d90c2edd7deaa2af0533085f1ff5ae6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62049
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id44213c7dd4d0df97a6c57d7f1b9d950baaf0e1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62047
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie304b08b0b1bbad5547a0169ea8056d703141391
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61830
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1a4bc1aae8e815b882a607432e40caf1066453b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61828
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I07cef3b619991afb6337c38a631ee159677d30a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61826
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0274f03926d97fc543b98f3fb961580283202806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61825
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I33e4501fd689d642682891c7f5bc9cb7ca5e331c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61824
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1940246fd88db29054f85c43672adc97dc90fa04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61823
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3d8a8a7e2b1e490726986139014cdfcf1271c64b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61805
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Idb8f30b2d1069aea1d5ce7c5dda7f99de33a7c26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61803
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iddf0727a538f2063cfabbec1f900c488331f33c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib0d1be34775c5eacf6cd9b0ec400bd42a93c59e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia9bc235c257abce2a3cd63cfd1b17ac356267d8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic3fbf307bfa42bd377c8f23c1837a6d15cb378e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I80d9038d1f41d65201d6bfdb808708f997d71faf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic97d48633ef1f246c181046ec32ab81614ba5ceb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I78734f685672347b06783f834643347a35c59e79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4e051b21ca55d25c6fc6cfb529078b18adaab2cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62028
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0c72a5c5306d63c5fce24bf727704d212d0ad0f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9cef57bbaf3e3519b7f6a7e3d86979722b598ad7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Guybrush platforms have I2C3 controller which is shared between PSP and
X86. In order to enable cooperation, PSP acts as an arbitrator. Enable
SOC_AMD_COMMON_BLOCK_I2C3_TPM_SHARED_WITH_PSP, so that proper driver is
binded on the OS side.
With this change in place it is important to use correct kernel version
which has I2C-amdpsp driver [1] enabled. Otherwise, we won't have I2C3
available and thus TPM device available in OS, what may end up as a
serious error - guybrush refuses to boot without access to TPM.
BUG=b:204508404
BRANCH=guybrush
TEST=Build proper kernel and firmware. Run on guybrush and verify TPM
functionality.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=78d5e9e299e31bc2deaaa94a45bf8ea024f27e8c
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I9dd94e47e1a02e790427b67adff84de3eb3ee387
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61965
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add chausie EC blob into CBFS at specified location
Change-Id: I48de08a18054efbda655e1563a539ff2ba7a38a6
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Qualcomm CRD devices do not have a fingerprint sensor so removing the
QUP configuration for it. This QUP also coincidentally is the same as
the one used for the TPM, so this initially was also causing TPM
communication issues during bootup as the QUP was being reconfigured
during the later stages after QcLib execution.
BUG=b:206581077
BRANCH=None
TEST=Boot to kernel without any CR50 communication errors
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I8d13b67796b70b0b7e9a4721cca0b8a54b2b27c1
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61716
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add wifi sar for vell
BUG=b:218992598
TEST=emerge-brya coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Change-Id: I74fddd1dbcb7019fd5fe394da291f125f0d4960f
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch corrects the DQ mapping and enable ECT. In Vell design,
the DQS is swapped in Mc0.ch1, Mc0.ch3, Mc1.ch0, Mc1.ch1 and Mc1.ch2
but the DQ mappings are not swapped and that causes ECT training
failure.
BUT=b:208719081
TEST=emerge-brya coreboot chromeos-bootimage && ensure the system
passes ECT training and all the way booting to the OS.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Idd2ad16151f0b2b93b00295b75a66ba65cba23cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:182963902
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I73dc695afb7aa2b32aa966070eb057c828073d47
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:182963902
BRANCH=None
TEST=None
Change-Id: Ia73460d335e859644511b7e9ca80111a919baf2c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Clang does not seem to work with 'fall through' in comments.
Change-Id: Idcbe373be33ef7247548f856bfaba7ceb7f749b5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The google/agah variant will use a peripheral that will require the use
of the PCIe Resizable BAR feature from the PCIe spec. Thus, select
the new Kconfig option to enable it. The appropriate Resizable BAR size
will be updated later.
BUG=b:214443809
TEST=build
Change-Id: I9cf86ba3160ae5018655b5d366e89f4273b30b94
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Change to use i2c/generic to match ELAN FW update script.
BUG=b:210970640
TEST=emerge-draco coreboot chromeos-bootimage
Change-Id: Ib416da6000d9e99f9c37cf497fb1c43e3fca0220
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add an option to build skiboot as a payload. This makes QEMU Power9
board simpler to use as skiboot is necessary anyway.
Change-Id: I0b49ea7464c97cc2ff0d5030629deed549851372
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Follow latest schematic to update the DQ map.
BUG=b:218939997
TEST=boot into OS without issue.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If29cc22b1749fb5d602d3ce64bcc1182593d673f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Disconnect all GPIO's that aren't connected to anything.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2050da62f73c0f99fbfef013c22e35225cc480c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add comment for each GPIO details its endpoint based
on the schematic.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia3678274dcd52285019fb3cf8ccd22617268ce1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The SPI ROM REQ/GNT pins are used in systems where the EC and the APU
share one flash chip to make sure that not both devices will try to
access the flash at the same time. The firmware running before the x86
cores are released from reset has likely already done this, but do it
again in bootblock just to be sure. The KBRST_L pin can be used to reset
the APU from the EC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5af285ac222ed6625f498d82360f2d1cc522df2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Commit 805956bce [soc/intel/cnl: Use Kconfig to disable HECI1]
moved HECI1 disablement out of mainboard devicetree and into SoC Kconfig,
but in doing so inadvertently disabled HECI1 for Puff-based boards which
previously had HECI1 enabled by default. To correct this, move the Kconfig
selection back into the mainboard Kconfig, and set defaults to match values
prior to refactoring in 805956bce.
Test: run menuconfig for boards google/{drallion,hatch,puff,sarien} and
ensure Disable HECI1 option defaults to selected for all except Puff.
Change-Id: Idf7001fb8b0dd94677cf2b5527a61b7a29679492
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adds LTE power off sequence for beadrix.
BUG=b:204882915
BRANCH=dedede
TEST=FW_NAME=beadrix emerge-dedede coreboot
Change-Id: I11370bf69438465d2230e2633044ba42685a152b
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61329
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Chromebook needs to do some additional check, which is not
available in the AMD's PI released SPL table.
BUG=b:216096562
Change-Id: Ib8074641b9fc9b38239a6e3837b8569e14af3342
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Nereid does not support the LTE sub-board, so disable the LTE-related
GPIOs.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I6d6b5babeefb7c4b79adab5e756f37616c2338d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add an initial overridetree for nereid based on the pre-proto schematic
and build matrix.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I7d313439337c84ab1024b3570cc7b57b4255af5d
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Nereid P1 will also use Hynix H9JCNNNBK3MLYR-N6E. Add it to the parts
list and regenerate the memory IDs using part_id_gen.
BUG=b:217096008
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ibacb9dfb336967dd7fffe351d785cbbff9ba8b7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Create the kinox variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:215049181
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_KINOX
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I68cac421f6299a5f82f2ab51633173648c993060
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61789
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configuration support for 4k-byte addressing mode
BUG=b:215605946
TEST=Validated on qualcomm sc7280 developement board
Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
Signed-off-by: T Michael Turney <quic_mturney@quicinc.com>
Change-Id: If82de6204446251dded1b83684677e6eb536e6fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Data on channel 0 & 1 are normal (from DMIC)
but there is noise on channel 2 & 3, so change to NF
PAD_CFG_NF(GPP_R6, NONE, DEEP, NF4) to PAD_NC(GPP_R6, NONE),
PAD_CFG_NF(GPP_R7, NONE, DEEP, NF4) to PAD_NC(GPP_R7, NONE),
BUG=b:210802722
TEST=FW_NAME=vell emerge-brya coreboot
Change-Id: I1b5ccd2c239e526e4f1ce2d5ed6c1386303590c8
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61033
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `reset` gpio is currently being consumed by the btusb kernel driver.
The functionality was added in https://crrev.com/c/3342774. The goal of
the patch was to reset the BT device when command timeouts occur. This
works, but it doesn't support the case where the BT device is having
problems with USB enumeration. In that case the device can't enumerate
so the driver can't help resetting the device.
If we instead switch to using an ACPI power resource, the kernel can
control the BT device's power. This is beneficial when the device is
having USB communication problems since the kernel will try and power
cycle the device.
We don't lose the ability to reset the device on command timeouts
either since `btusb_qca_cmd_timeout` will enqueue a USB port reset if
there is no `reset` GPIO. So win / win.
This results in the following power resource:
PowerResource (PR02, 0x00, 0x0000)
{
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x01)
}
Method (_ON, 0, Serialized) // _ON_: Power On
{
\_SB.CTXS (0x84)
Sleep (0x01F4)
}
Method (_OFF, 0, Serialized) // _OFF: Power Off
{
\_SB.STXS (0x84)
Sleep (0x0A)
}
}
I switched the device tree entry from using reset_gpio to enable_gpio
because the acpi_device_add_power_res method asserts the reset in the
_ON method unconditionally. This results in a small glitch on the line.
By using the enable_gpio we get the correct behavior.
I don't have a datasheet right now, so I just picked some values for the
reset timing. The kernel driver was using 200ms. We can revisit the
numbers when we get a datasheet.
BUG=b:218295688
TEST=Suspend stress test on nipperkin with 600+ cycles. Verify power
resource is created on the kernel. This should allow the kernel to
power cycle the device via usb_acpi_set_power_state.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib1eff86db76929f76432cd6f765880c892e7a786
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
When brya boards that use ChromeOS autoupdate update their firmware,
devices with SOC_INTEL_CSE_SUB_PART_UPDATE will end up attempting to
replace IOM and NPHY BPDT firmware in the CSE region. However, because
of the way the autoupdate works, the CSE RO will not be updated during
autoupdate. This means that these boards now have different stitching
schemes between CSE RO and RW and this causes the sub-partition update
to fail and the boot hangs. To remedy the situation for these boards,
a separate FMD files is provided so they can continue to use the
cse_serger tool for stitching. The only boards affected were kano and
brask, so they are updated here.
BUG=b:218376385
TEST=use flashrom to downgrade to 14474 then use futility to update to
image with this patch and system boots.
Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com>
Change-Id: Ia8bdf6b28d952f6d983b84e39da96e159027a822
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Brask cannot pass powerd_dbus_suspend test because the NIC does not
enter ASPM L1.2. Here we add "enable_aspm_l1_2" in devicetree for
RTL8125 to enable ASPM L1.2.
BUG=b:204309459
BRANCH=None
TEST=emerge and test with command powerd_dbus_suspend
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I9a56df1d68696f409f9ee681d37de6759a588d80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add/update initial GPIO pin descriptions and initialization types for
chausie mainboard.
Change-Id: I14ea0e1086f626398a867896ee81ce07cf530182
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change adds LTE modem for beadrix.
BUG=b:204882915
BRANCH=dedede
TEST=Build and boot beadrix, check with command modem status
Change-Id: I7acb88634478ff486810b2c3fc14d6739c3268e1
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61328
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Agah port 0 does not have a retimer so the port needs
to be configured for the SOC to handle Aux orientation flipping.
Add the "TcssAuxOri" and "typec_aux_bias_pads" to lets the SoC IOM firmware control the Aux DC bias voltages.
BUG=b:210970640
BRANCH=NONE
TEST=emerge-draco coreboot chromeos-bootimage
Change-Id: I1fa5c4574b1a0e8dd2f66f3f6382436337c530fa
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Alder Lake N has single memory controller with 64-bit bus width. Alder
Lake common meminit block driver considers bus width to be 128-bit and
populates the meminit data accordingly. By setting half_populated to
true, only the bottom half is populated.
Ideally, half_populated is used in platforms with multiple channels to
enable only one half of the channel. Alder Lake N has single channel,
and it would require for new structures to be defined in meminit block
driver for LPx memory configurations. In order to avoid adding new
structures, set half_populated to true. This has the same effect as
having single channel with 64-bit width.
Change-Id: I414e5dc82caf47b6b96c474b3ef6e01c2ce0226e
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
The mainboards mc_apl{2,4,5,6} use VBOOT for verification and can be in
a recovery state for different reasons. In this case we still want the
MRC cache to be around to avoid the DRAM retraining on every boot.
This patch enables the Kconfig switch HAS_RECOVERY_MRC_CACHE which makes
the already available MRC recovery region in FMAP useable.
Test=Boot mc_apl2 in recovery mode and make sure the recovery MRC
cache is used.
Change-Id: I2ea4993f05dd87a0e637f55e84b4fc06f5e29ecc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This IRQ routing info is taken from mb/google/guybrush. The IRQ routing
on Chausie that was a 1:1 copy caused some issues with the I2C driver,
so port the Chausie IRQ mapping change back to Majolica.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieb958639dd8aef7c60c050ad107dde7d1cd6a8bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This IRQ routing info is taken from mb/google/guybrush. This should fix
these errors:
[ 0.655051] i2c_designware AMDI0010:00: IRQ index 0 not found
[ 0.659239] i2c_designware AMDI0010:01: IRQ index 0 not found
[ 0.663198] i2c_designware AMDI0010:02: IRQ index 0 not found
[ 0.667200] i2c_designware AMDI0010:03: IRQ index 0 not found
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8c85c8e4b1c860d6ca25060353355f703a49e1e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
|
