| Age | Commit message (Collapse) | Author |
|---|
|
Change STORAGE_UNPROVISIONED to STORAGE_UNKNOWN depend on depthcharge setting.
BUG=None
TEST=emerge-brox coreboot
Set STORAGE_UNKNOWN on jubilant, check that NVMe and UFS can boot.
Change-Id: I4cfd7322c2940862dfbae46e85522715cd7534c1
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83935
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
Before:
I2C2 - 431KHz
I2C4 - 413KHz
After:
I2C2 - 364KHz
I2C4 - 370KHz
BUG=b:351968527
TEST=Rate of the actual measured machine is pass.
Change-Id: Ieb75db1dc95ffd5ca806a194ae678c700fa0741c
Signed-off-by: Wei Hualin <weihualin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83906
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
|
|
Set up soundbar-related GPIOs for updating.
BUG=b:358435383
TEST=emerge-constitution coreboot chromeos-bootimage
Change-Id: I517da8de90487533e49e46649c5acf4ccfcc5160
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83936
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes WWAN configuration from the bootblock.
It appears that setting it up in the bootblock may not be necessary.
Configure in bootblock,the seq will be triggered at the same time.
The customer would like us to leave some buffer for EN to RST.
BUG=b:357764679
TEST=Build and verified test result by EE team
Change-Id: I2c0e789c0bec293f4bca711e53644d62f4f83551
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83792
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds a new board as a variant of the Acer G43T-AM3 with the
following prominent changes:
* Intel Q45 northbridge (GMCH) instead of a G43
* 4 MiB of flash instead of 2 MiB
* Two serial ports (one external, one internal)
* A parallel port connector (internal)
* An FDD connector
* DVI-D instead of HDMI
* No Firewire
The port was done based on logs and info received via private email. It
was only tested on the Acer G43T-AM3 so far, which still builds and works.
Change-Id: Ic2654ca4b198bfea409992be14e89702cf67ea50
Signed-off-by: Julia Kittlinger <launchpad.vineyard395@passinbox.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
In preparation for CB:83968, rework the configuration files and move
files specific to G43T-AM3 to its own variant directory.
Change-Id: I425852f4bdacf7cb6688a5fb845ac3001373262e
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Signed-off-by: Julia Kittlinger <launchpad.vineyard395@passinbox.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57764
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch calls `xhci_host_reset()` function to perform XHCI
controller reset.
Currently, the PMC IPC times out while sending the USB-C (0xA7) command
during poweron from S5 (S5->S4->S3->S0).
On Brya variants, poweron from S5 state results in PMC error while
sending PMC IPC (0xA7) to USB-C active ports, log here:
localhost ~ # cbmem -c | grep ERROR
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x200a7 failed
[ERROR] pmc_send_ipc_cmd failed
[ERROR] Failed to setup port:0 to initial state
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x200a7 failed
[ERROR] pmc_send_ipc_cmd failed
[ERROR] Failed to setup port:1 to initial state
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x20a0 failed
This problem is not seen while powering on from G3 (G3->S5->S4->S3->S0).
During poweron the state of USB ports are not the same between S5 and G3
and it appears that the active USB port still is in U3 (suspend) while
PMC tries to send the IPC command, which results in a timeout.
This patch utilises the S5 SMI handler to reset the XHCI controller
using `xhci_host_reset()` prior entering into the S5, it helps to
restore the port state to active hence, no PMC timeout is seen with
this code change.
Supporting Doc=Intel expected to release a TA (Technical Advisory)
document to acknowledge this observation and supported W/A for ADL
generation platforms.
Till that time, keeping this W/A as part of the google/brya specific
mainboard alone.
Note: other ADL-SoC based mainboards might need to apply the similar
W/A.
BUG=b:227289581
TEST=No PMC timeout is observed while sending USB-C PMC command (0xA7)
during resume from S5.
Total Time: 1,045,855
localhost ~ # cbmem -c | grep ERROR
No PMC timeout error is observed with this CL.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibf06a64f055a0cee3659b410652082f31e18e149
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Recently merged commit 8cc1d79ed0c3 (mainboard/qemu-aarch64: Get top
of memory from device-tree blob) missed a rebase and hence needs the
include path updated.
Tested `make qemu` for qemu-aarch64.
Change-Id: Id669eeaabbc1710bb7e408659f2d79f682427919
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Trying to probe RAM space to figure out top of memory causes an
exception on AArch64 virtual machines with recent versions of QEMU, but
we temporarily enable exception handlers for that and use it to help
detect if a RAM address is usable or not. However, QEMU docs recommend
reading device information from the device-tree blob it provides us at
the start of RAM.
A previous commit adds a library function to parse device-tree blob that
QEMU provides us. Use it to determine top of memory in AArch64 QEMU
virtual machines, but still fall back to the RAM probing approach as a
last-ditch effort.
Change-Id: I4cc888b57cf98e0797ce7f9ddfa2eb34d14cd9c1
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80364
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
1.Set unused device's GPIOs to NC based on fw_config.
2.Disable config for nvme, ufs and CNVi based on fw_config.
3.Add fw_config STORAGE_UNKNOWN to enable all storages
for the first boot in factory.
BUG=None
TEST=emerge-brox coreboot chromeos-bootiamge
check fw_config messages in ap log
verify devices on/off by fw_config on jubilant
Change-Id: I8d9f4edea454e0861f91261bf13fa80572d0a181
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Locking GPP_F15 causes DUTs with fingerprint sensor to not be able to
correctly power down and stay powered down. This pin does not need to
be locked.
BUG=b:359692570, b:356750516
BRANCH=firmware-brya-14505.B
TEST=`FW_NAME=gimble emerge-brya coreboot chromeos-bootimage`, flash and
boot gimble into developer mode, then reboot into dev screen and select
the "Power off" button and verify gimble powers off and does not power
itself back up.
Change-Id: I1c73035b02021b0d1268cd46dcd0841621556ad5
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83932
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The AP console log contains "HECI: No CSE device" and the system cannot be entered.
BUG=b:359474142
TEST=abuild -v -a -x -c max -p none -t google/dedede -b awasuki
The "HECI: No CSE device" message for AP log disappered
Change-Id: I488056dc8bca2174dd96c28793e3202b7aae890c
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83905
Reviewed-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This reverts commit 2eb5c1e83ef5206f384846d7514c3aebcaec5bb8.
Reason for revert: The latest release of FSP will not boot
without a display being connected using this VBT. The original
VBT does not have this issue, nor is the original issue that
commit 2eb5c1e83ef5206f384846d7514c3aebcaec5bb8 fixed.
Revert it to restore booting when there is no display.
Change-Id: I05f9037cd68b8b29e69156e2372a544985f4442e
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Extracted from coreboot-Google_Phaser.11297.296.0.bin.
Fixes display init on newer LASER14 boards.
TEST=build/boot google/phaser, observe display init successful.
Change-Id: Icb48edb4e74f147e3458f845d921a15a2d1906da
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83897
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In next phase, riven will remove external fivr. Use the board version
to config external fivr for backward compatibility and show message.
BUG=b:359062365
TEST=build, boot to OS, suspend/resume work normally.
Change-Id: Id5f538b2eda7820a922b8d9ee14b2bae7df3726c
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Brox does not have PCIe WWAN or discrete GPU. Hence no need to power
them off during suspend. Hence also remove the MPTS ACPI method.
BUG=None
TEST=Build Brox firmware and boot to OS.
Change-Id: Ia239c3f038ce31934efb0a391350fa0f786e3fcd
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83788
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Brox uses Ti50 which always supports long interrupt pulse. Hence no need
to override GPIO PM.
BUG=None
TEST=Build Brox firmware and boot to OS. Perform suspend/resume for 25
cycles.
Change-Id: I6a138c1953714bc29570db587594cab8f315a4ec
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83856
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables the TCSS XHCI in the devicetree to solve the genesys
hub enumeration issue.
BUG=b:348332200
TEST=Able to build google/nova and ensure lsusb can list genesys
hub device.
Change-Id: Ic8e25756a2975e884434c4c7e3d587f4c1f0ed0b
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83845
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Confirm with EE, the GPP_C1 don't need PU 20K.
So modify GPP_C1 setting to remove PU 20k
Schematic version: 500E_GEN4S_ADL_N_MB_0418
BUG=b:358162951
TEST=Build and boot on pujjoga.
Change-Id: I7ad16cd29ab467d3eac74dab40522c577d91c747
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83818
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1. The P sensor need follow WWAN FW_CONFIG to enable/disable
2. Modify GPP_H19 setting to PAD_CFG_GPI_APIC to fix PLT test fail
Schematic version: 500E_GEN4S_ADL_N_MB_0418
BUG=b:357998089
TEST=1. Boot to OS and verify the P sensor devices is set based on
fw_config.
2. Confirm that the PLT test can pass successfully.
Change-Id: Ic3610180c8cf99eba9367e26bfc3666410af19f7
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This change adds the necessary configuration for the elan
touchscreen (ELAN9004) device, connected to I2C bus 16.
It includes settings for:
* HID descriptor
* Device description
* IRQ configuration
* Detection
* Reset, stop and enable GPIOs with their respective delays
* Power resource handling
* HID descriptor register offset
BUG=b:348125053 b:348126380
TEST=emerge-nissa coreboot
boot with elan TS, make sure elan TS is functional.
Change-Id: I64c5a11dfaacfcca34240375d4dca5c76a60f62e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83876
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Turn on DRAM_LED on the mainboard in early bootblock, and turn it off
in ramstage. Primarily an indication if boot fails during raminit,
modeled after vendor firmware.
This LED is controlled by GPIO07 on the super I/O.
Boot tested on hardware.
Change-Id: I549b51375d1ef056d5fc01871bfe62d60b8a01cb
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I27568d1205216f697b48ffb09ce5208505718978
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83863
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update dptf settings for EVT.
BUG=None
TEST=emerge-brox coreboot chromeos-bootiamge
Change-Id: Iadc95c14da6f879e25dac4804907e340dc16e47f
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83842
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update touchpad settings.
BUG=b:342867386
TEST=ensure touchpad is working.
Change-Id: Ibf62470b7fd921065201894a63d7e2a83dad53ce
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Add TPM TIS ACPI interrupt configuration, set teliks's
`TPM_TIS_ACPI_INTERRUPT` to 13.
BUG=b:352263941
TEST=emerge-nissa coreboot
Change-Id: Iaed51e0bb8abac0ed0b35bfcf12e95fd34f92242
Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83832
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Because one side is not displayed when using type-c projection, the
configuration of DP AUX BIAS to SOC direct connection is added.
BUG=b:352263941
TEST=DP function of MB and DB workable
Change-Id: Id89d02212cdad549d1c26ed51a8d5af0f4e757c6
Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83829
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables pch_hda_sdi_enable for the trulo baseboard and
removes SDI lanes update from its variants.
BUG=b:350931954
TEST=Boot verified on google/craask and google/tivviks
Change-Id: I2e0f43b8fffb5e583089769d2c7446b476ce5d5d
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83859
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:345373187
TEST=Build and test on google/rex0, check BRDS is shown in SSDT.
Change-Id: I28541e7a23dd486d3e0ec38ee89e1ab13595fc72
Change-Id: I82f6290cb1934e2c0597286702f93e3789e8f345
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:345373187
TEST=Build and test on karis, check BRDS is shown in SSDT.
Change-Id: I28541e7a23dd486d3e0ec38ee89e1ab13595fc72
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83791
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
This reverts commit 1f1d8d2bcae64baea19d0e947ba5572a45f46eec.
Reason for revert: Intel® Wi-Fi 6E AX211 (CNVi) does not need Bluetooth
Regulator Domain Settings and therefore, the bluetooth companion
device declaration for CNVi is unnecessary.
BUG=b:345373187
TEST=Able to build and boot google/karis.
Change-Id: I296ddb93659af144e1a82a6b8219c9811c5fe545
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83843
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iab7e9f3d17c87576761333c4b62c40eea5e424a5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Devicetree for lenovo/520 is missing USB ports config, hence they
don't work. This change introduces USB port config.
Tests performed:
- Can select a boot media using a USB keyboard from any port.
- Can boot from each port except usb@1:1.1.
- Measured read speed from a thumb drive on each port 24.5-28.9 MiB/s.
Change-Id: I96dba153a563e0e290b96b837fdca39d7598ef17
Signed-off-by: PuFF1k <exopuf@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
As `qemu-q35/memmap.c` includes `qemu-q35/q35.h`, move macros into q35.h
file.
Change-Id: I0bf13def8bc4510053f6bb44e043bbcb0b958b01
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The Fn key on jubilant emits a scancode of 94 (0x5e).
BUG=b:324079605
TEST=Flash jubilant, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: I963b0aa85598097fea69ec34d1e79ec0bbec3db3
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83821
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refactor mainboards' code to use the new GPIO driver.
TEST=Put Google Jecht to S3 sleep and check if the LED blinks.
Change-Id: I707ee090ee2551b4935847e12ade678d36ff9302
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add SAR Sensor SX9324 for WWAN:
- Apply DRIVERS_I2C_SX9324
- Config GPP_H19 for IRQ
- Add SX9324 registers settings based on tuning value from SEMTECH.
Refer to datasheet:
https://chromeos.google.com/partner/dlm/avl/component/3624/
BUG=b:345327104
TEST=Build and verify on jubilant
Change-Id: I629117f20ca513dc0c8eaa91744ad33e162ba4bb
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83779
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
wifi.SetTXPower test fail, so enable wifi sar.
BUG=b:351698478
TEST=emerge-brox coreboot
Change-Id: Ibf5425e72eddc45e376ef4e2d077180dab502200
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change adds the necessary configuration for the G2 Touchscreen(GTCH7503) device, connected to I2C bus 40.
It includes settings for:
* HID descriptor
* Device description
* IRQ configuration
* Detection
* Reset and enable GPIOs with their respective delays
* Power resource handling
* HID descriptor register offset
BUG=b:350844195
TEST=emerge-nissa coreboot
boot with G2 TS, make sure G2 TS is functional.
Change-Id: If17367cd62eb69a1237efe4aa3ca1a0c9640ba4c
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83823
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MKBP device is required for passing events from input sources to AP.
Input sources include buttons (power, volume); switches (lid, tablet
mode) and sysrq.
BUG=b:357521411
TEST=Build coreboot and switch tablet mode on orisa.
Change-Id: Ic712f53fb4063347c38df05167f0100afc06f979
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83819
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This change adds support for soldered-down memory on the Fatcat board.
It introduces a new Kconfig option `MEMORY_SOLDERDOWN` and includes
the necessary Makefiles adjustments to handle SPD data in CBFS when
this option is enabled.
* A new Kconfig option `MEMORY_SOLDERDOWN` is added to control
soldered-down memory support.
* When `MEMORY_SOLDERDOWN` is enabled, it selects:
* `CHROMEOS_DRAM_PART_NUMBER_IN_CBI` if `CHROMEOS` is enabled
* `HAVE_SPD_IN_CBFS`
* The Makefile is updated to include the `variants/$(VARIANT_DIR)/
memory` subdirectory and conditionally include the `spd` subdirectory
based on `CONFIG_HAVE_SPD_IN_CBFS`.
BUG=b:348678071
TEST=Able to build google/fatcat with N-1 silicon.
Change-Id: I7edc1134630940812186118a29cbbd550f0e3634
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Add the support LP5 RAM parts for fatcat:
DRAM Part Name ID to assign
H58G56BK7BX068 0 (0000)
BUG=b:347669091
TEST=emerge-fatcat coreboot
Change-Id: Idcdbbcd42dc6b1c8b13a89b1ace5b2973dde6d2b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83824
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
|
|
This change enables storing the ISH firmware version on the Trulo
baseboard by selecting the `SOC_INTEL_STORE_ISH_FW_VERSION` config
option.
BUG=b:354607924
TEST=Able to dump ISH version on trulo.
> cbmem -c | grep ISH
[DEBUG] ISH version: 5.4.2.7780
Change-Id: I69a7fa19c53f435ef1f6306b259f703c7b196137
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83820
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
The Fn key on awasuki emits a scancode of 94 (0x5e).
BUG=b:355538142
TEST=Flash awasuki, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: Ic7aa183bf314fed4901133dc70d848d84fab0784
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1. Change driver form i2c/hid to i2c/generic.
2. Add fw_config for touchscreen.
BUG=b:351968527
TEST=ectool cbi set 6 0x0x10200a0;
touchscreen functions normally;
Change-Id: Ifd6330be8924d4873f0efab3ce404168a62099eb
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83704
Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures the GPIO pins to enable ISH on the Trulo device,
in accordance with schematic_20240607.
BUG=b:354607924
TEST=Builds successfully for google/trulo.
Change-Id: I3af478762e0a0aa35a2698e0ed87a4d8c24362f0
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83781
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch configures the GPIO pins to enable ISH on the Orisa device,
in accordance with schematic_20240607.
BUG=b:354607924
TEST=Builds successfully for google/orisa.
Change-Id: I24745ba629c59c092ce676b29915e356a4d8d8af
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83656
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Adjust Touchpad I2C fall time configuration such that it meets the
I2C fast mode specification(<= 400KHz).
BUG=b:328670295
TEST=Build Brox firmware and boot to OS. Confirm the I2C bus
frequency(375 KHz), rise(650 ns) and fall(330 ns) times meet the
specification.
Change-Id: I0006bfb9bb5839ffa1248d9f2ea055160ed0936e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83755
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
The property `has_cdm` only existed in an early patchset, the version
that was merged only requires `cdm_index` so remove the former that
was added in c6c75dfbaeff208c17bb47fdede855286e12d857.
Change-Id: I62a9456e9a4f1571328ba6fd09ae383a8fd11767
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83796
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I3161c7d99a2d94d6c85a6c9652b8e78d3f447252
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Clean up the devicetree by removing settings set to 0, which are
initialized with 0 anyway, remove superfluous disabled devices and also
remove comments duplicating the device alias names.
Change-Id: I07005ae1db7d92fd50e72351031a5eb491768d3e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83782
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove some unused GPIOs and configurations for GPIO's that
aren't even connected.
Change-Id: I5b4691a0b5e8b1348304d11c1d59aa60517041ec
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83626
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs for WiFi and Bluetooth are also connected to the EC.
They are controlled from there so remove the configuration here.
Change-Id: I7aef1b821420daf5ea9f6ae107021e5d406a5ec3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The platform uses eSPI so these are not needed.
Change-Id: I81470658263f4b601c9964ff5bed86b22d24df3b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83624
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the USB ACPI to add entries for the USB and TCSS ports.
Change-Id: Iab8b6e03c8c05e459fb354bc008109c873a4846f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83623
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that multiple TPM drivers may be compiled in, it is possible to
support switching between fTPM and dTPM.
The patch adds:
- Device tree entry for PC80 discrete TPM
- TPM PIRQ# GPIO active low routed to IOAPIC for TPM interrupt
- MEMORY_MAPPED_TPM option to board's Kconfig to enable PC80 TPM driver
When the ME is disabled, e.g. via HECI command, chipset will route the
TPM traffic to SPI automatically. When a SPI TPM is connected to the
JTPM1 on the board, it will be probed successfully and initialized
in place of inactive PTT/fTPM.
Change-Id: Ie6e7026b6f1cec842bce4ef40b6db7feb75200e3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80456
Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Tested using `edk2` from
`github.com/starlabsltd/edk2/tree/uefipayload_vs`:
* Windows 11
* Ubuntu 22.04
* Manjaro 22
No known issues.
https://starlabs.systems/pages/starlite-specification
Change-Id: I8724e578c21353032b844b20b868348580ff561b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Depending on how firmware image was passed to QEMU, it may behave as:
- ROM - memory mapped reads, writes are ignored (FW image mounted with
'-bios');
- RAM - memory mapped reads and writes (FW image mounted with e.g.
'-device loader');
- flash - memory mapped reads, write and erase possible through
commands. Contrary to physical flash devices erase is not required
before writing, but it also doesn't hurt. Flash may be split into
read-only and read-write parts, like OVMF_CODE.fd and OVMF_VARS.fd.
Combined size of system firmware must not exceed 8 MiB by default
(FW image(s) mounted with '-drive if=pflash').
This function detects which of the above applies and fills
region_device_ops accordingly.
Tested by starting QEMU with firmware passed as '-drive if=pflash',
'-drive if=pflash,readonly=on' and '-bios'. When started with firmware
passed through '-device loader', coreboot complains about corrupted
FMAP, but this is the same behavior as without this change:
[ERROR] Invalid FMAP at 0x40000
[EMERG] Cannot locate primary CBFS
Writable pflash support was added about 17 years ago, so it should be
supported by all QEMU versions currently in use. Since QEMU 5.0.0 it is
possible to change the limit of firmware size with `max-fw-size` machine
configuration option, up to 16 MiB, as bigger sizes would overlap with
default IO APIC memory range.
Change-Id: I3ab9f22c6165064a769881d4be5eab13a0a2f519
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82555
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
|
|
Update GPIOs for WWAN and USB Camera functions.
BUG=b:341188351
TEST=Build and verify on jubilant
Change-Id: I145aa994767ddc59be519b96017af71badf82734
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
|
|
Define ISH main firmware name so ISH shim loader can load firmware
from file system.
BUG=b:354607924
TEST=Boot trulo board, check that ISH is enabled and loaded
lspci shows: 00:12.0 Serial controller: Intel Corporation Device 54fc
Change-Id: Id60cb416a1cce5407bd483f0ce54f477584459b1
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83671
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Match PCIe root port allocation and associated comments to
boardview, as follows:
Z77 PCIe ports 1-4: PCIEX16_3 (x4)
Z77 PCIe port 5: PCIEX1_1
Z77 PCIe port 6: RTL8111F LAN
Z77 PCIe port 7: ASM1042 USB3
Z77 PCIe port 8: ASM1061 eSATA
CPU PCIe lanes 1-8: PCIEX16_1
CPU PCIe lanes 9-16: Multiplexed via 4x ASM1480 to PCIEX16_1 lanes 9-16
and PCIEX16_2 lanes 1-8
(CPU PCIe lanes are not covered by overridetree.cb.)
These are not hardware tested.
Change-Id: I472e28add254ea945b401d1ddfd03f29f46d8fd2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The ID for X10SLM+F is 0811 as reported by Knogle on IRC.
Change-Id: Ie58aad50e66efbc3113541884beea9668d886b5d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Because Awasuki doesn't have SD card, disable related configurations.
BUG=b:351968527
TEST=abuild -v -a -x -c max -p none -t google/dedede -b awasuki
Change-Id: I1b0d2a9c2f9cdd4bca7c30cdc454ffa84b293146
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83706
Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BRANCH=None
BUG=b:348171026
TEST=Test on TI PDC device
Cq-Depend: chromium:5691079
Cq-Depend: chromium:5691080
Cq-Depend: chrome-internal:7464767
Original-Change-Id: I6ffb8bdb2245a74b0d5270435d0ffc8a44e7c2a6
Original-Signed-off-by: Bob Moragues <moragues@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/5691110
Original-Reviewed-by: YH Lin <yueherngl@chromium.org>
Change-Id: Iac5b4cd4dcb1d274553f78e9d4295f8f9ad8a863
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch introduces the following changes,
- Remove TCSS XHCI (USB 3.x) devicetree settings
- Update Over Current (OC) & USB 2.0 config
- Update TCSS-XHCI capabilities
BUG=b:348332200
TEST=Able to build google/nova and ensure lsusb can list genesys
hub device.
Change-Id: I4b4025bea41f67224ac35ff2077b1394f2c3e380
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83707
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the PMC MUX related setting from devicetree as Nova
doesn't include a MUX for it's USB-C port.
BUG=b:348332200
TEST=Able to build google/nova
Change-Id: I23a949ba9b598d7a86c6f8b08a2821651978e489
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Fix potential undefined behaviour in the `get_pkg_power()` function:
- If `rapl_power_unit == 0`, `pkg_power_info / rapl_power_unit` is
invalid
- If `rapl_power_unit > 7`, the result of the shift doesn't fit into a
`uint8_t`
Signed-off-by: Mate Kukri <km@mkukri.xyz>
Change-Id: I48ef59c4fbeb0a55675ac24da31e6e0b194cb58d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83736
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
UART0 is already configured in coreboot, so this change sets SerialIo
config for UART0 to PchSerialIoSkipInit to skip initialization in FSP.
BUG=none
TEST=Able to build and boot google/rex0. Able to see all debug prints
over CPU uart.
Change-Id: I37744f05083eb82ba8ca579b628b69aa976e3d1f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83750
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang builds (bootblock: 20800 bytes) are slightly larger than GCC
builds (bootblock: 18688 bytes) so increase the size of both bootblock
and romstage.
The technical reference manual mentions no upper limit to the size of
the bootblock in the TI header so increasing the bootblock size is
allowed.
To be able to link the clang bootblock increase it from 20K to 22K.
Change-Id: I8719bc3728d4cc8dba8d939cc154c3fc0884d47b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The Type-C kernel driver no longer programs the AP mux. So remove device
references to the TCSS Mux control device from the Type-C port driver.
BUG=b:351117685
TEST=USB-C drive can be detected after system warm or cold reboot.
Change-Id: I2fd6e8fcebd194da03ba3f264ee89037ca11769a
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83746
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The previous uploaded verb table is not fully applied due to
configuration error. Uploaded the verb table provided by Realtek which
can be found in b:336967284.
BUG=b:326412504, b:336967284
TEST=deploy and check volume
Change-Id: Ib9a8248c4a437fd204f40918d801a4a010a5c4df
Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Terry Cheong <htcheong@chromium.org>
|
|
DC offset of class-D amplifier is 7mV in Brox which is larger than the expected 3mV.
Add a section in the verb table to enable class-D calibration based
on the updated verb table provided by Realtek in b:342506575 comment#6.
This improves the offset to be less than 1mV.
BUG=b:342506575
BRANCH=main
TEST=Verify DC offset of speaker amplier output is less than 1mV with a multimeter when \
playing -100dB sine waves.
Change-Id: I776f5c24ce3c829cbd64840957c1431608cf2b85
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Create the jubilant variant of the brox reference board by copying
the template files to a new directory named for the variant.
BUG=b:348543712
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_JUBILANT.
Change-Id: Ic54437697058f8bce2167093bd88c0880d1b7cac
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83212
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
Change-Id: I3c4a963b233f549c7a76c76333af87c887550ac3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The Windows drivers require the subsystem ID to match on the PCI
device, so set these to allow the driver to install.
Change-Id: I01b36554d5322018efc72734a8e749cc06263577
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83621
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SMRAMC, C_BASE_SEG, G_SMRAME, D_LCK, D_CLS, D_OPEN, ESMRAMC, T_EN,
TSEG_SZ_MASK and H_SMRAME are already defined in included "q35.h" file.
Change-Id: Ic3c01cca14749f77adecc327a78ac011ba3f4c0b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83429
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the teliks variant of the nissa reference board by copying
the anraggar files to a new directory named for the variant.
BUG=b:352263941
BRANCH=None
TEST=1. util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TELIKS
2. Run part_id_gen tool without any errors
Change-Id: I744f4d7c2d35544d3a8a8f76e24bad3298442768
Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83408
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The Type-C kernel driver no longer programs the AP mux. So remove device
references to the TCSS Mux control device from the Type-C port driver.
BUG=b:351117685
TEST=USB-C drive can be detected after system warm or cold reboot.
Change-Id: I4a24fb69ebec87f65b679cde0e4a1a8827cd365d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83722
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch drops fw_config probing for ISH because ISH IP should
remains on by default for all Trulo variants.
Additionally, removed the redundant ISH entries from variant
override devicetree.
BUG=b:354607924
TEST=Able to verify ISH PCI Device is available while booting eMMC sku.
```
lspci
00:00.0 Host bridge: Intel Corporation Device 461c
...
00:12.0 Serial controller: Intel Corporation Device 54fc
...
00:1a.0 SD Host controller: Intel Corporation Device 54c4
```
Also, able to enter S0ix with this patch.
```
> suspend_stress_test -c 1 --ignore_s0ix_substates
At AP console:
s0ix errors: 0
s0ix substate errors: 0
s0ix pc10 errors: 0
At EC console:
power state 5 = S0ix, in 0x38d87
```
Change-Id: Ic1e415ec848ac91a9bbf21b26597f4e6b5f7a1f5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83695
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reduce PchPmSlpAMinAssert (pch_slp_a_min_assertion_width) to minimum
time (98ms) from 2sec.
BUG=b:349595391
BRANCH=firmware-brya-14505.B
Test=Verified on xol
Change-Id: Ia4b7b7ab5dc9afeb3505dfd2b42d0d397aed7a5c
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83683
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Streamline variant-level overrides by removing redundant entries that
already exist in either the SoC-level or the platform-level configurations.
BUG=None
TEST=emerge-nissa coreboot
Change-Id: I0b28354dfb865900a78a9d0738e00aa952eade0e
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change adds a new USB2 Bluetooth device configuration on Port 10
for the Trulo variant.
* A new `drivers/usb/acpi` chip is added with:
* `desc` set to "USB2 Bluetooth"
* `type` set to "UPC_TYPE_INTERNAL"
* `reset_gpio` set to "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)"
* `device` referencing `usb2_port10`
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I9a92a4d008eb4d0c339079ecbbb77facece435ba
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change removes the configuration for the unused USB2 Port 6
(index 5) and its associated Bluetooth device on the Trulo variant.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I9970274b9b1b1076a2f9d649d61c825cac71d0c7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83665
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rishika Raj <rishikaraj@google.com>
|
|
This change removes the configuration for the unused USB2 Port 6
(index 5) and its associated Bluetooth device on the Orisa variant.
It also cleans up a redundant newline before the `serial_io_i2c_mode`
definition.
BUG=b:351976770
TEST=Builds successfully for google/orisa.
Change-Id: Icf1ff442530ad2263ad0b58829e5c7b2ce544439
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83664
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rishika Raj <rishikaraj@google.com>
|
|
This patch moves the configuration for integrated Bluetooth
functionality (USB2 Port 9) from Orisa variant to the Trulo baseboard.
This change is necessary to support the CNVi BT module on Trulo
variants. The configuration is skipped for Orisa.
Trulo: USB2 Port 9 is now configured as USB2_PORT_MID(OC_SKIP) to
support the CNVi BT module.
Orisa: The previous configuration of USB2 Port 9 as a Bluetooth port for
CNVi WLAN has been removed.
This change ensures proper Bluetooth connectivity is applicable for all
Trulo variants including Orisa and Trulo.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I760a82cb6f6c98db7249caf1ba7e6d6c5dc8f2c4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83663
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add STORAGE_UNKNOWN fw_config to enable all storage devices.
2. Update fw_config probe to enable/disable devices in devicetree.
3. Disable eMMC controller incase STORAGE_UFS or STORAGE_NVME fw_config
is enabled.
BUG=None
TEST=emerge-nissa coreboot
Change-Id: Id3a22aa2206e86fdca6f6fadbc849572890fee58
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83657
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS for
Orisa variant which intends to achieve a unified AP firmware
image across UFS and non-UFS skus.
BUG=b:345112878
TEST=Able to enter S0ix on Orisa eMMC sku after disabling UFS
during boot path.
Change-Id: I969b0c0c785ed4c408f6fc6de71e7d0c1a1ea27c
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch selects USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS for
Google/Trulo variant which intends to achieve a unified AP firmware
image across UFS and non-UFS skus.
Note: Enabling this config would introduce an additional warm reset
during the cold-reset scenarios due to the function disabling of the
UFS controller as results we are expecting ~300ms higher boot time
(which might not be user visible because `cbmem -t` can't include
impacted boot time due to in-between resets).
BUG=b:355384185
TEST=Able to enter S0ix on Trulo eMMC sku after disabling UFS
during boot path.
Able to grep below debug prints while booting the eMMC sku.
[INFO ] FW_CONFIG value from CBI is 0x20000000
[INFO ] Disabling UFS controllers
...
[INFO ] fw_config match found: STORAGE=STORAGE_EMMC
Change-Id: I06a84fa8c3843edae5932e19d394b18b72ace422
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83654
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
|
|
Not setting tcss_aux_ori in devicetree is the same as
setting it to zero so remove it.
Change-Id: Ia0e90179dd05b23f1f36935be51327250c5a8684
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update wake-up type, mainboard feature flags and enclosure type.
All other info are used from src/lib/smbios_defaults.c
Change-Id: I8a7d4958171df121e2cd3acb3a71554c695d64ab
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Update wake-up type, mainboard feature flags and enclosure type.
All other info are used from src/lib/smbios_defaults.c
Change-Id: I8e68c057fefa1d408fb8d69fef066cb573c929a4
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83328
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add sample DIMM slot configuration table for avenuecity CRB
and beechnutcity CRB. This table will be used to fill SMBIOS
type 17 table.
TEST=Boot on intel/avenuecity CRB
It will help to update Locator, Bank Locator and Asset Tag
with the value described in dimm_slot_config_table
Change-Id: I53556c02eb75204994a1bcb42eccb940e83bd532
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83326
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to clean up a bit, drop devices which are equivalent to the
ones from chipset devicetree.
Change-Id: I92765b404508901c7e84fad0bca30489cf69abac
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83456
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
In preparation for dropping the Chrome-EC submodule, remove the ability
for Chrome-EC and PD components to be built as part of coreboot.
These components have not been used or buildable for many years.
Change-Id: Ibf6bd43e755cf5b4d2aa8a42f38dc52e7023e9b3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83638
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
MAINBOARD_VENDOR is already provided by the Kconfig file on the vendor
level, so there's no need to redefine it to the same value at the
mainboard level.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icfcbcec005fadb8eaf1b8f90e1d71b3c6ee32088
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83640
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The Fn key on riven emits a scancode of 94 (0x5e).
BUG=b:345231373
TEST=Flash riven, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: Iddedd08fc50e8e8e369ce3d73edf0f3077867e87
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83614
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch configures GPIO pins as required for booting the Trulo
device from ramstage.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I7b540416083a923ba4d2e52aa8edafb4bfb9ac0e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Change-Id: If514ee7c1174d13b8ca8eb7fd20359e0730a8893
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83525
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to clean up a bit, drop devices which are equivalent to the
ones from chipset devicetree.
Change-Id: Ie485684747efccb8fb0ab87f10694c52a98f3c88
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83455
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialise overridetree based on the schematics revision 20240715.
BUG=b:351968527
TEST=abuild -v -a -x -c max -p none -t google/dedede -b awasuki
Change-Id: Ie8194b6eca3e88f08f92e0ac8a9063b8de738652
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
