summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-12-20mb/google/poppy: Enable speaker and codec for namiGaggery Tsai
Nami uses MAX98357A speaker amplifier and DA7219 codec. This patch adds max98357a and da7219 under I2C #3 in devicetree and adds SPK DMIC nhlt support for 4CH DMIC. BUG=b:70646770 TEST=emerge-nami coreboot Change-Id: Iecf4059f8ea3d5e34f33f0be227897a8cca636fa Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-19mb/hp/xxx0p: set ACPI and SLPT bit in _WAK and _PTSIru Cai
ACPI bit is not set after an S3 resume, so set it in _WAK. Setting SLPT bit can make the power LED blink in S3. Change-Id: I2badc69510275df57938cb8607b3c4e0df50f028 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/22929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-19mainboard/lenovo: add Lenovo Z61t laptopAndrey Korolyov
This platform shares most hardware components with first-gen Core Lenovo laptops such as T60/X60, with much smaller EEPROM size as one of notable differences. The port features Intel graphics, ATI-based version should work with vendor VBIOS. Tested peripherals: - sleep/resume, - USB ports, - ACPI Fn key bindings/volume buttons, - backlight control, - ethernet, - wireless (under Linux), - sound/beep, - dock handling, - serial via dock. Untested peripherals: - IrDA, - parallel port, - PCMCIA, - S-Video port, - modem, - FP reader (should just work), - IEEE1394. Linux 3.16 works with native gfxinit perfectly, with Intel VBIOS console sometimes displays nothing when i915 framebuffer is used. Windows 7 has an interrupt assignment issue with iw3945, otherwise tested stuff is fine. Change-Id: I84c89cc47d3db126d827f92d50270954bc42f224 Signed-off-by: Andrey Korolyov <andrey@xdel.ru> Reviewed-on: https://review.coreboot.org/21019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-19mainboard/intel/saddlebrook: add support for Saddle BrookTeo Boon Tiong
Add initial files to support the Saddle Brook board. This board uses the Skylake FSP 1.1 image and does not build without the FspUpdVpd.h file. Most of the code has been taken carried over from kunimitsu with changes done for Saddle Brook. Saddle Brook is a reference board for Skylake SOC and has DDR4. TEST=Build with uefi payload and boot to Linux 4.9 on CRB successfully. Change-Id: Ie221eb58e8ab8ff15e9ef19c1d145a5eb2921b4e Signed-off-by: Anuj Mittal <anujx.mittal@intel.com> Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/21436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-12-19mb/google/poppy: Configure WWAN gpiosFurquan Shaikh
BUG=b:70773281 Change-Id: If9b575568cabcbee03ad190b69d9c033890f7fa6 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22927 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-19mb/google/poppy: Configure GPP_B0 for WLAN wakeFurquan Shaikh
As per the latest schematics, this change configures GPP_B0 for WLAN wake and uses corresponding gpe bit in ACPI node for WLAN. This hasn't been tested yet. BUG=b:70775494 Change-Id: I5198b8083a87d00f890b45986e5e3f62b81686c2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22928 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-19mb/google/poppy: Configure pen reset and eject linesFurquan Shaikh
This change configures the GPIOs for pen reset and eject lines and exports required properties using ACPI table. BUG=b:70773138 Change-Id: I52f6c3dced54259cde8ee6753275622622e15954 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/poppy/variants/nautilus: Enable AER and LTR for root port 1Furquan Shaikh
Similar to other KBL projects, this change enables AER and LTR for root port 1 on poppy. BUG=b:65570878 Change-Id: Iadad3d2fc46cbba575a776071305925c529a6760 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/poppy: Configure GPP_B8 for WLAN_PE_RSTFurquan Shaikh
BUG=b:62726961 Change-Id: I5a88e67d5a22f8a39427c95821ffee4f2fd717fa Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/poppy/variants/nami: Fix SATA configs againFurquan Shaikh
This change really fixes the SataMode to select non-RAID mode and enables SATA which was incorrectly disabled in a71276b (mb/google/poppy/variants/nami: Fix SataMode configuration in devicetree). BUG=b:70160119 Change-Id: Ied6adabdc1d2458972bde628616a198cd41f9f3e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/poppy: Configure GPP_F3 as NCFurquan Shaikh
GPP_F3 is not connected on poppy or any of its variants. This change configures GPP_F3 as NC on poppy and all the variants. BUG=b:70160119 Change-Id: I303276ab9546d56c846755fa3a6142978f6b8c92 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/poppy/variants/nami: Fix GPIO configuration for DEVSLPFurquan Shaikh
Nami uses DEVSLP1 and not DEVSLP0. This change updates the GPIO configuration for DEVSLP to match the latest version of schematics. BUG=b:70160119 Change-Id: Ifa181322011a4b8947ecd0fa44dcf790b0d8f657 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/fizz: Enable 2nd NIC ledsDavid Wu
This patch enables customized NIC leds as below: Green Orange (Amber) 100M off blinking 1000M on blinking BUG=b:69950854 TEST=Boot on fizz dut and observe the LEDs are behaving as expected. Perform suspend/resume test and the LEDs are still working as expected. Change-Id: Ic70587a0cd688e74b5e1ce532c5da954c80cf841 Signed-off-by: David Wu <david_wu@quantatw.com> Reviewed-on: https://review.coreboot.org/22817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-17mb/google/poppy/variants/nami: Fix SataMode configuration in devicetreeFurquan Shaikh
Similar to Fizz, SataMode on nami should be set to AHCI. This change fixes the configuration error done in 903472c (mb/google/poppy/variants/nami: Add support for nami board). BUG=b:70160119 Change-Id: Ia88b56ae6bd9121f8447f7c1a2f5a10990fb8ed5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22845 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-17mb/google/poppy/variants/nami: Fix GPIO config for PCH_SPK_ENFurquan Shaikh
PCH_SPK_EN uses GPP_A23 and not GPP_A22. This change fixes the gpio configuration error in the initial change 903472c (mb/google/poppy/variants/nami: Add support for nami board). BUG=b:70160119 Change-Id: I90d9c009369c53cfec47fe77356e181d5ecf7ad5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22844 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-15mb/google/snappy: add reset pin for Melfas touch controllerKevin Chiu
Melfas kernel TS driver (melfas_mip4.c) will look up "ce" GPIO during driver probe in ACPI _DSD. But FW does not report "ce-gpios" but "enable-gpios" in _DSD. Kernel will obtain GPIO from _CRS by index "0" without ID. Melfas driver does not have separate condition for MIT-410 so driver will set TS IC power off in probe. FW now may need to add back "reset" pin in order to hack this condition to let Melfas driver get "useless" GPIO so TS IC power (VTSP) will be not off during driver probe by itself. BUG=b:70149336 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: Icf0451ff0c3df97cb2474e30542a2f46ba67d82a Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/22858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-15mb/google/fizz: set SataMode to AHCI modeKane Chen
For Fizz, the default should be AHCI mode and not RAID mode. Additionally, there is only one drive connector, so attaching several drives for a RAID is hard. BUG=b:70146894 Change-Id: I2a9aa2d6281a916c00ff4659a927f164ba0e0705 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/22837 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-14mainboard/intel/glkrvp: Configure Prmrr and Enable SGXPratik Prajapati
Configure PRMRR to allocate 128MiB for SGX enclave memory and enable SGX by default for GLKRVP platform. Supported PRMRR size options: 0x02000000 - 32MiB 0x04000000 - 64MiB 0x08000000 - 128MiB Change-Id: Ifa39df4a1da84bae49551a9626257bda0729752b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-14mainboard/google/kahlee: Update overcurrent pinsMartin Roth
The overcurrent pins on kahlee weren't mapped correctly, causing the USB-A port to stop working. None of the EHCI only ports are used for external connectors, so all of the overcurrent pins should go to the XHCI connections. This is also true of the Grunt board. On Grunt, this also means that we don't need OC3, as it doesn't map to anything in the XHCI controller, as it's coming from an internal hub. BUG=b:70636233 TEST=Build & boot Kahlee, verify USB-A port is working again. Change-Id: I53336a18a26bd9be27c7265fddbcd780632656bf Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2017-12-14mb/glkrvp: Enable TouchpadShaunak Saha
This patch enables the APLS touchpad in glkrvp platform. TEST= Boot and test touchpad works. Change-Id: I6f52f7db57ab52b5531e647bde2adbb78b40f76f Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22627 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-13mb/cannonlake_rvp: Enable TouchpadShaunak Saha
This patch enables the APLS touchpad in cnl-y platform. TEST= Boot and test touchpad works. Change-Id: I461b9d119b1cac6c8c6cb9b096697f58e00d80ad Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22369 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-13mb/google/poppy/variants/nami: Disable native SD card controllerFurquan Shaikh
This change selects Kconfig option to disable native SD card controller in ACPI tables, since it is not used on nami. BUG=b:70160119 Change-Id: I6180c2b342c69e6a7c357f10b6297d67ea0211d7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-13mb/google/fizz: Enable SATA on port 0David Wu
Enable SATA port 0 to support SATA HDD. BUG=b:69950854 BRANCH=None TEST=emerge-fizz coreboot and boot on fizz dut Change-Id: Ifbf5950151758286f8bff7250a68d9d0b3975ef9 Signed-off-by: David Wu <david_wu@quantatw.com> Reviewed-on: https://review.coreboot.org/22815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-12google/kahlee/grunt: Add SPD filesMarc Jones
MEM_ID SPD 0000 hynix-H5AN8G6NAFR-UHC 0001 hynix-H5ANAG6NAMR-UHC 0010 micron-MT40A51216JY-083E 0011 micron-MT40A1G16KNR-075E 0100 samsung-K4A8G165WB-BCRC 0101 samsung-K4AAG165WB-MCRC BUG=b:69268926 TEST=build test Change-Id: I1fd6335b3f8842252c42009a0a91a5b6ed3ea238 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22748 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-12google/scarlet: support INNOLUX P097PFG panelLin Huang
Add INNOLUX P097PFG panel timing. According to Scalet schematic, if GPIO3_D4 get low status, it will use INNOLUX P097PFG panel; if GPIO3_D4 get high status, it will use KD097d04 panel. Change-Id: I43fa5d859a9a529a84c58a953b37d03953ce648a Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-12soc/amd/common: Move Agesa related headersRichard Spiegel
Move AGESA related headers in soc/amd/common to soc/amd/common/block/include/amdblocks. BUG=b:69262110 TEST=Build with no error gardenia and kahlee (no code change, headers moved). Change-Id: I5d3064625ddf8caaf370aabaf93165c6817f1ca0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-12mb/lenovo/t400/blc.c: Add a new panel to the listArthur Heymans
Also adds a comment in the code to clarify what this array is about. Change-Id: I04b185a5dbd7a7ccb039820f19d2cb549b9a2eac Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-12-12mb/google/poppy/variants/nami: Implement variant_memory_paramsFurquan Shaikh
This change provides implementation of variant_memory_params for nami. Since it uses DDR4 memory, DQ-DQS mapping table is not required. Also, Rcomp resistor values are provided based on SDP v/s DDP memory. BUG=b:70188937 Change-Id: Ic1d0cfdb7d8b02fa0be0a4c54b20057a4c2fc3ce Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-11mb/google/poppy/variants/soraka: Tune I2C5 paramsFurquan Shaikh
This change updates scl_lcnt value for I2C5 to bring the bus frequency closer to 400kHz. BUG=b:65062416 TEST=Verified that I2C5 frequency is between 389-396kHz. Change-Id: Ibaccab0c797174332633cb75e30d18ff5af76a43 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-11soc/amd/common: Move files to common/blockRichard Spiegel
The following files need to be moved: amd_pci_util.c, amd_pci_util.h and spi.c. The remaining files are AGESA related and will be part of a separate issue/commit. BUG=b:62240201 TEST=Build with no error gardenia and kahlee (no code change, just folder reorg). Change-Id: I3f965afa21124d4874d3b7bfe0f404a58b070e23 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-11google/gru: Stop mucking with unused I2S0 pins in codec configJulius Werner
Due to a schematic error, our code was written to configure more I2S0 pins than are actually used. We're also pinmuxing the whole bank of pins over to the I2S controller even though we don't need them all. Restrict the GPIO initialization and pinmuxing to the pins we really need so the other ones can be correctly used as SKU ID pins on Scarlet. Also, move the "audio" IO voltage domain selection to the other such selections in the bootblock, since that covers two whole banks of GPIOs and there's no guarantee that they're all used for audio (and thus not needed before ramstage). BUG=b:69373077 TEST=Booted Scarlet, confirmed correct SKU ID (7) was detected on rev2. Change-Id: I9314617e725fe83d254984529f269d4442e736f1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Schneider <dnschneid@chromium.org>
2017-12-11google/gru: Change Scarlet SKU ID pins to pull-upsJulius Werner
These pins need to be pull-ups. I forgot. BUG=b:69373077 Change-Id: I9314617e01d35898254984529f269d4442e736f1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-11mainboard/purism/librem_skl: Fix line length > 80 charactersMartin Roth
Make lint-stable was giving an error on this. Change-Id: I06d11d86151f683b82b6df537e3de8c52d33e8b4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-12-11google/nautilus: Add Maxim98357a supportNaveen Manohar
Adds Maxim98357a support for Nautilus using the generic driver in drivers/generic/max98357 BUG=b:68686020 TEST=With entire merged audio should be enabled on max98357 speaker codec. Change-Id: I958bf7c1395259b3e3fb30332882fd51a48dc0cc Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/22458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-11mb/google/poppy/variants/nautilus: add SPK DMIC nhlt supportNaveen Manohar
Nautilus board uses max989357a speaker codec and 4CH DMIC. Select the appropriate NHLT blob to be packaged in CBFS. Also generate the required ACPI NHLT table for codec and the supported topology in nautilus. BUG=b:68686020 TEST=With the required driver support in kernel verify that the Audio plays on Speaker and captures on 4CH DMIC Change-Id: Ie90af02e0935029f53f9020bd78027b6eb31a187 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/22457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-11AMD fam10: Link southbridge/amd/rs780/early_setup.cArthur Heymans
Removes rs780_before_pci_init() since it was a no-op anyway. Removes get_nb_rev() since this function is provided via a macro in the header. This Makes a lot of function non-static since the header has prototypes for these. Change-Id: I8933516771d959583bbd59a5c1beee3e30a7004f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-12-11intel: Use MSR_EBC_FREQUENCY_ID instead of 0x2cElyes HAOUAS
Change-Id: Ib1b761fc417f1bb000f408d3bed5e8666963f51d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/22603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-09mb/intel/glkrvp: Add gpio.h in dsdt.asl fileShaunak Saha
Add proper variants gpio.h in dsdt.asl where the GPE_EC_WAKE and EC_SCI_GPI is defined. Change-Id: Ideb6dd4d0ac496a81721cd883865218cb19583d9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-09google/cyan: fix FSP memory init paramsMatt DeVillier
In the original Chromium source, PcdMemorySpdPtr is only set for cyan, but none of the other Braswell variants. When upstreamed, it was left set for all boards as it didn't appear to be problematic. In wider testing, I came across one reks board for which it caused FSP memory init to fail, so restricting the parameter to cyan only as it was originally. TEST: build/boot google/reks with Micron EDF8132A3MA-JD-F RAM, observe board now successfully boots where it did not previously. Change-Id: Iacfbd4bc89fa04717baf85704181d346bca2ed2f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22782 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-09mainboard/google/kahlee: Update GPIOsMartin Roth
- The touchscreen interrupt was moved from the GPIO 3, as originally suggested to GPIO 11. This changes the gevent from 2 to 18. - Add EMMC reset on GPIO 93. - Add EMMC bridge PCIe reset on GPIO 40. - Set device enables to high. - Remove extra SCI comment from GPIO 130. - Set individual device PCIe reset pins to high. - Enable global PCIe reset on GPIO 26. - Mark LPC_CLK1 as unused. - Update net names based on latest schematics. - Set Direction and level/edge correctly for SCIs/SMIs. - Remove SCI for pen detect. - Add comments. BUG=b:70234300, b:69681660, b:69305596 TEST=build grunt Change-Id: Ib591e4278ed23d0963ecb19ad9c326498b4c7796 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-09mainboard/google/kahlee: Update PCIe port mapMartin Roth
- Grunt moved the EMMC chip to port 2, where Kahlee had the SD reader on PCIe port 1, so move the OemCustomize file into the variant directory. - Add comments in baseboard version so it's easier to understand. - Update reset pins, put the definitions in gpio.h BUG=b:70255003 TEST=Build and boot Kahlee. Build Grunt. Change-Id: I78ec72e9d6fd52b8ac75e7187bd01ee7ddc3ba2a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-08src/mainboard/glkrvp: Turn on CPU fanSrinidhi Kaushik
On GLK EC does not support temperature reads and does not control the fans anymore, OS is responsible fan control through EC. This hack enables running of the fan for boards without External EC. Change-Id: I361e53d4fd53678f3abb8fe9862071aec6e149a7 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/22235 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-12-08mb/intel/glkrvp: Fix CLKRUN gpioShaunak Saha
This patch does not put CLKRUN in IOSTANDBY. Change-Id: I7fedd729d3bb66c2b52a63166e461f8760457721 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-08google/fizz: Set BJ max current and voltageDaisuke Nojiri
This patch makes coreboot set the max current and voltage for barrel jack adapters. BUG=b:64442692 BRANCH=none TEST=Boot Fizz. Use chgsup console command to verify the max current and voltage are set as expected. Change-Id: Ifebee09096e0935cc7d3e53920a251b0496d3c55 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/22623 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-08mb/google/reef: provide override GPIO table in coralChris Wang
Allow overriding specific GPIOs by SKU ID. Override two GPIO settings for nasher to save the power consumption when the system in S0ix. Change as below: AVS_DMIC_CLK_A1: IGNORE -> Tx1RXDCRx0. AVS_DMIC_CLK_B1: IGNORE -> Tx1RXDCRx0. BUG=b:69025557 BRANCH=master TEST=compile/verify the power consumption change from ~150mW to ~100mW on clamshell SKU and from ~200mW to ~100mW for convertible SKU. Change-Id: I9e0674f206426fddb3947273754774b310106334 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-12-07mainboard/intel/glkrvp: Change gpio configuration for eSPIBora Guvendik
Skip LPC related gpio configuration if eSPI config option is selected. Change-Id: I15c5f769f36a1801217b1e3650379c7b181d814f Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22757 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07google/scarlet: update Kingdisplay kd097d04 timingLin Huang
With the old timing, the hblank time isn't large enough, it may cause display artifacts. So fix it. BUG=b:70160653 TEST=panel work on Scarlet rev2 board Change-Id: Ib061f5e215611d20f59e3f24cfe3c7fbc507ebed Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-12-07asus/p2b-ls: Disable SuperI/O ACPI logical deviceKeith Hui
This logical device is disabled in OEM BIOS. Disable here to match, since its support is currently incomplete anyway. Change-Id: I5c07136ec6a14a8ee8cb68537a2663b78fc0fa20 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/22145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-07asus/p2b: Align ACPI tables with asus/p2b-lsKeith Hui
Updates ACPI tables with work done for asus/p2b-ls, including super I/O related declarations. Change-Id: Id2420da4ab04aa5f59ac0aa237d21477a03b826e Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/22473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-07asus/p2b-ls: Add ACPI tablesKeith Hui
Add ACPI tables support that will be needed for soft-off and S3 resume in the future. Boot tested for soft-off. Change-Id: I28b559406bd53efc555dcbb8282dfe2bd6d1af87 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-07kahlee/ec.c: Use new wide IO functionRichard Spiegel
In preparation to deleting early_setup,c, change early_ec_init() to use new southbridge.c function sb_set_wideio_range and remove <#ifdef __PRE_RAM__>. BUG=b:64033893 TEST=Build, boot and check serial output, search for "Covered by wideIO xx", which should match earlier message "Range assigned to wide IO xx" generated within modified early_ec_init(). Change-Id: Iaea17f4f636aab6bd8b05b1b3bed53a677164e74 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07mb/google/poppy/variants/nami: Add support for nami boardFurquan Shaikh
This change adds variant nami derived from baseboard poppy. BUG=b:70160119 Change-Id: Ic6795d49d3e6e98a32f4af0b621e8bb463041412 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07mb/google/poppy: Add support for DDR4 memoryFurquan Shaikh
This change updates memory SPD handling code in baseboard poppy to allow variants to define either LPDDR3 or DDR4 memory types. In addition to that, it also updates the function to print SPD info considering offsets that might be different across the two memory types. BUG=b:70188937 Change-Id: Iefad01719c62264fb0d7e987904e77647d6026c2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07mb/google/poppy/variants/nautilus: Fix memory paramsFurquan Shaikh
Until now, nautilus was using the DQ-DQS mappings provided by the baseboard. However, based on schematics, these values are not correct. This change adds DQ-DQS mapping tables for nautilus. BUG=b:70188533 Change-Id: Ife6ba19b8fe8873ab8cca977ca8f34a4d86e8e6e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22706 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: shkim <sh_.kim@samsung.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07mainboard/intel/glkrvp: Ignore Audio DMIC IOSSTATESathyanarayana Nujella
Audio DMIC_CLK needs to be ON in S0ix to support Wake on Voice. So, configuring GPIO_171 to be as IGNORE IOSSTATE, so that clock is ON in S0ix state. BUG=None TEST=put DUT in S0ix, verified DMIC_CLK in scope when wov capture path is ON Change-Id: I147cf3c12acb11429c6cb234e8c511f57886b6b4 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07google/gru: Add SKU ID for ScarletJulius Werner
Scarlet has SKU detection strapping pins now. This patch adds the code to read them. BUG=b:69373077 Change-Id: I8d889a845950923bc7b5be9b79792cf3c8b6b8ad Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22697 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07boardid: Switch from Kconfig to weak functionsJulius Werner
This patch switches the board_id and ram_code helper framework to use weak functions rather than Kconfigs to determine whether the board supplies these IDs. This cuts down on the amount of boilerplate Kconfigs many boards have to set and also gives them more flexibility, such as being able to determine at runtime whether a given ID is present. Change-Id: I97d6d1103ebb2a2a7cf1ecfc45709c7e8c1a5cb0 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22695 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07boardid: Minor clean up and standardizationJulius Werner
Merge the different coreboot table strapping ID structures into one because they're really just all the same, and I want to add more. Make the signature of the board_id() function return a uint32_t because that's also what goes in the coreboot table. Add a printk to the generic code handling strapping IDs in ramstage so that not every individual mainboard implementation needs its own print. (In turn, remove one such print from fsp1_1 code because it's in the way of my next patch.) Change-Id: Ib9563edf07b623a586a4dc168fe357564c5e68b5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06Kconfig: Remove BOARD_ID_MANUAL optionJulius Werner
The BOARD_ID_MANUAL and BOARD_ID_STRING options were introduced for the Urara board which is now long dead, and have never been used anywhere else. They were trying to do something that we usually handle with a separate SKU ID these days, whereas BOARD_ID is supposed to be reserved for different revisions of the same board/SKU. Get rid of it to make further refactoring of other options easier. Also shove some stuff back into the Urara mainboard that should've never crept into generic headers. Change-Id: I4e7018066eadb38bced96d8eca2ffd4f0dd17110 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22694 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06mb/*/*/Kconfig: Remove default MMCONF_BASE_ADDRESS on Sandy BridgeArthur Heymans
Change-Id: I6f0d6d7fefc77fb05cdb629d09de8cb72496a9cc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-12-06mb/google/poppy: Remove variant_cros_gpios from variantsFurquan Shaikh
Variants nautilus and soraka currently provide the exact same definition for variant_cros_gpios as provided by the baseboard. This change removes the function defintions from variants so that the weak definition in baseboard can be used. Change-Id: Ic88623f34039792f0f9fb46842b24e4f1290981b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22705 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06mb/google/poppy: Add config option for camera ACPI supportFurquan Shaikh
This change adds a new config option VARIANT_HAS_CAMERA_ACPI to allow variants to define ACPI tables for camera support. It also prevents boards that do not need this from unnecessarily providing dummy files for camera ACPI support. Change-Id: I91f8e407e0f021071eeadbde8c2695e2a6d69e06 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Change POPPY_USE_* to VARIANT_HAS_*Furquan Shaikh
Change the prefix for TPM options from POPPY_USE_* to VARIANT_HAS_*. This makes it clear that these are variant specific options. Change-Id: I6fd120a34a5b0c1f018164d5c2b60548da1d0f61 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Introduce VARIANT_SPECIFIC_OPTIONS_*Furquan Shaikh
In order to allow variants to select different Kconfig options, this change adds VARIANT_SPECIFIC_OPTIONS_${VARIANT_NAME} which can be selected by each variant in Kcnonfig.name. Change-Id: I15db2fdac5c9e55f9698c8a0c083d6467afae245 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Remove dynamic disabling of TPMFurquan Shaikh
This change removes the dynamic disabling of TPM based on config options. Poppy and its variants will have only one type of TPM supported and so there is no need to update it dynamically. Change-Id: Ie82825fcf7092e845583edaac9ba0d3fc9d1dd80 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22704 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-06mb/google/poppy/variants/soraka: Disable SPI TPMFurquan Shaikh
Soraka is no longer using SPI TPM. This change disables GSPI0 in device tree and updates gpio config accordingly. Change-Id: Ia0554ce3a0d553631123cc2b23b6dc2f6f40a1a3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06mb/google/poppy: Disable SPI TPMFurquan Shaikh
Mainboard poppy is no longer using SPI TPM. This change disables GSPI0 in device tree and udpates gpio configuration accordingly. Change-Id: I713e41c45e323bf13aa79412ec679c90121a52b2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06google/kahlee: Set USB OC pinsMarc Jones
Set the USB over current pins for the Grunt baseboard and Kahlee mainboard. Removes the ACPI ASL OC code, which is not used on Stoney Ridge SOC. BUG=b:69229635 TEST=Build and boot Kahlee. Not tested with OC test fixture. Change-Id: I5a9b3409d9c91b89fd02f8eecf9e04c435f14342 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-05google/gru: update RAMID tableLin Huang
There is some confusion with old RAMID table, make it clear, and let's no longer tangle it in future. Change-Id: I44215b4a6668074575a5df691ac1ff8fa3d15492 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-12-05mb/google/poppy,nautilus,soraka: Disable PD on AC_PRESENT in deep SxFurquan Shaikh
This change updates device tree deep_sx_config to disable internal pull-down on AC_PRESENT. BUG=b:69983729 Change-Id: I041900a5262f8fd920856f126185329242a0639a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-05mb/hp/8460p: Add TPM supportBill XIE
After applying this change, /dev/tpm0 is visible inside GNU/Linux with kernel 4.9.51-1 from Debian, and there is a menu item shown inside SeaBIOS' (master only) interface if ESC is pressed. The TPM is confirmed working with [Heads](https://github.com/osresearch/heads). Change-Id: I3b845928954d203d1c3608b6704fedbd590e1fa9 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/22602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-04mb/google/fizz: Enable Wake-on-Lan featureGaggery Tsai
This patch enables WOL feature. BUG=b:69290148 BRANCH=None TEST=powerd_dbus_suspend && sudo etherwake -i eth0 $MAC to make sure the system could be woken up by WOL packet. Change-Id: I1178a776db2cdb448fe6650d49ae6c0281ac1128 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-02google/reef: Fix whitespace inconsistency in coral codePatrick Georgi
BUG=none BRANCH=none TEST=none Change-Id: I4e61f1327027c5100773e2b837f439a939807e72 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02google/reef: add more USB tuning for coral variantsPatrick Georgi
Lava numbers are in. BUG=b:69990330 BRANCH=none TEST=verified that USB signal is within spec Change-Id: I7416ec8d058271700ebe43f8d92af61c6c0d6b42 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quantatw.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02mainboard/google/kahlee: Remove usb_oc.asl filesMartin Roth
These files aren't needed for the overcurrent functionality. BUG=b:69305596, b:69229635 TEST=Build Grunt & Kahlee. Overcurrent wasn't yet enabled so no other testing was needed. Change-Id: I8dcd50a249e387ccf1142949b359cee09942460a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-02mainboard/google/kahlee: Add Baseboard GPIOsMartin Roth
Add initial baseboard GPIOs based on grunt schematics. BUG=b:69305596 TEST=Build grunt Change-Id: I4efcee7dbf54fb9ea82e5e9394db805bb69203c8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-01mainboard/google/kahlee: Update Kconfig string used in makefilesMartin Roth
Update the variable ${CONFIG_VARIANT_DIR} to use parens instead. Either is valid, but since we use parentheses everywhere else, it's better to be consistent. BUG=b:69691210 TEST=Build grunt & kahlee Change-Id: Ieffabaae5516a893f1dc1f7195a17c4cdeae8853 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22656 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-30mb/google/poppy/variants/nautilus: Disable DPTFFurquan Shaikh
This change disables DPTF until the support is properly added in dptf.asl Change-Id: I68f2442e00718a4edbb34661d31d3a415d41c29f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-11-30mainboard/google/fizz: Disable DPTF active policyDavid Wu
Use EC to perform FAN control. BUG=b:67487721,b:69404739,b:64439568 BRANCH=master TEST=emerge-fizz coreboot and boot on fizz dut Change-Id: I3394d3af9cbdb3eab1f18254909f60e2704735c3 Signed-off-by: David Wu <david_wu@quantatw.com> Reviewed-on: https://review.coreboot.org/22481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-11-30mainboard/compulab: add support for CompuLab Intense-PCHal Martin
Add coreboot support for CompuLab Intense-PC (Ivy Bridge) Modifications: - Memory SPDs have been fixed to detect both installed SODIMM modules - Full-height Mini-PCIe slot defaults to PCIe mode - mSATA can be chosen instead of mPCIe via Kconfig option ENABLE_MSATA Tested (Xubuntu 17.10/Linux 4.13 where applicable): - 2+2GB DDR3-1600 SODIMMs pass memtest - 4+4GB DDR3-1600 SODIMMs pass memtest - 4+8GB DDR3-1333 SODIMMs pass memtest - 8+8GB DDR3-1333 SODIMMs pass memtest - Booting via USB working (with no SATA HDD present) - Booting to main SATA HDD working - DisplayPort and HDMI output working for coreboot init (*requires* VGA BIOS) - DisplayPort and HDMI dual-head working in Linux - Mini-PCIe devices (half/full-height) detected in Linux - mSATA working (when chosen using ENABLE_MSATA) - Onboard Intel 82579 GbE working - Secondary Realtek 8111 GbE working - Rear eSATA ports working - Onboard analog audio output working - HDMI audio output working - USB 3.0 working - Suspend to RAM (S3) working, but not tested extensively - Mini PCIe WiFi - FACE module FM-4USB (4 USB 2.0 ports) Disabled/unsupported: - TPM (BTO option, not included in base config) - FACE modules: - FM-USB3 (USB 3.0/mSATA) NOT SUPPORTED/TESTED - FM-SER (serial) NOT SUPPORTED/TESTED - FM-XTDEU2/4 (LAN) NOT SUPPORTED/TESTED - FM-XTDE4U2/4 (Quad LAN) NOT SUPPORTED/TESTED - FM-XTDM2 (dual mPCIe) NOT SUPPORTED/TESTED - FM-VC (video capture) NOT SUPPORTED/TESTED - FM-POE (Quad LAN w/PoE) NOT SUPPORTED/TESTED Not tested: - RS-232 Product information: http://www.fit-pc.com/web/products/intense-pc/ Change-Id: I741b0b2f87eb9147c375b405a5b6989a10c7ad0a Signed-off-by: Hal Martin <hal.martin@gmail.com> Reviewed-on: https://review.coreboot.org/22210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-30intel: Replace msr(0x198) with msr(IA32_PERF_STATUS)Elyes HAOUAS
Change-Id: I22241427d1405de2e2eb2b3cfb029f3ce2c8dace Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/22585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-30mb/google/poppy/variants/soraka: Set PCH thermal trip point to 75 degreeCSubrata Banik
PMC logic shuts down the thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold in case Dynamic Thermal Shutdown in S0ix is enabled. BUG=b:69110373 BRANCH=none TEST=Ensure Thermal Device(B0: D20: F2) TSPM offset 0x1c[LTT (8:0)] value is 0xFA. Change-Id: I6246300a4376a0194950d4de277af040b10b6c1f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30mb/google/nautilus: add synaptics touch screen supportChris Wang
Add synaptics touchscreen in the device tree so that the correct ACPI device is created. BUG=b:66462881 BRANCH=master TEST=compiled/verify the touchscreen works Change-Id: I6e89a5db0e9f8ae777eed661f3bf89d653a937e6 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-29google/kahlee: Add SPD functionMarc Jones
Add the mainboard_spd_read function in romstage and call the variants function. Grunt is the baseboard and has soldered down memory, so add it for the default weak SPD functions and build the SPDs in cbfs. Kahlee overrides the weak SPD function and falls back to the soc I2C SPD functions. BUG=b:67845441 TEST=Build and boot Kahlee. Change-Id: I789002bfadc1a2b24f9046708986d29c0e2daf33 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29google/kahlee: Rename board_id to memory_skuMarc Jones
The GPIOs used in board_id are meant to indicate the memory configuration. Rename board_id to memory_skus. Report the board_id received from the EC. BUG=b:69649438 Change-Id: I84bacead3daf829c97f595c4c11a243953243c29 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22561 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29mb/google/poppy/variants/nautilus: Disable camera devicesFurquan Shaikh
This change disables camera devices until camera support is properly added for nautilus. Change-Id: I7de37cbf9c32fa063f55a2e54986e33b66acfa3b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-29mb/google/poppy: Add variant support for camera aslFurquan Shaikh
This change adds infrastructure to allow variants to define their own camera.asl file. - Poppy and soraka use the one provided by baseboard. - Dummy file is added for nautilus since it does not have camera support enabled yet. TEST=Verified that DSDT table remains the same with and without this change. Change-Id: I0f0b489e74739aa4708283d58d8b7626b77a89a3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28google/scarlet: support kd097d04 panelLin Huang
Support kd097d04 dual mipi panel on Scarlet. Change-Id: Ie8bc0cbb79840f1924a8cc111f2511292203731f Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28google/gru: correct backlight gpioLin Huang
it uses backlight enable pin as backlight gpio currently, correct it and define the right backlight gpio. Change-Id: I7c5abfd5bbbae015b899f3edc8892ea32bf82463 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: support dual mipi dsiLin Huang
Refactor the mipi driver, so we can support dual mipi panel. And pass the panel data from mainboard.c, that we can support different panel with different board. Change-Id: Id1286c0ccbe50c89514c8daee66439116d3f1ca4 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28mb/google/poppy/variants/nautilus: set I2C speed to 400KHzChris Wang
Add "speed_config" for each I2C port configuration to set speed to 400KHz. BRANCH=master BUG=none TEST=compiled/verified Change-Id: Icb48733b87cefc92577547b1eab661a8cbb12be6 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22589 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-28mb/google/poppy/variants/nautilus: Change IA/GT/SA slow slew rate settingsChris Wang
Change IA/GT/SA slow slew rate settings. System's audible noise will be reduced with them. - Slow slew rate for IA/GT/SA : fast/16 - Fast PKG C-state ramp for IA/GT/SA: disabled BRANCH=master BUG=none TEST=compiled/verified Change-Id: Ibf11aba7bafb3b02c510905d7d904507eee6394b Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: shkim <sh_.kim@samsung.com>
2017-11-28mb/google/soraka: configure WLAN_PE_RST gpio in early_gpio_tableDivya Chellap
On shutdown, Soraka enters Deep S5 and not S5 state. Setting pad reset config of a gpio to RSMRST will not preserve the gpio config across deepSx and the gpio should be configured again. The WLAN_PE_RST signal should be brought up early in the bootflow for giving the device enough time to initialized before PCIE init in FSP-S. Hence, the gpio WLAN_PE_RST (GPP_B8) pad configuration is done in early pad configuration in bootblock also. BUG=b:64386481 BRANCH=none TEST= WiFi functionality across S5, S3, DeepS3, S0ix and warm/cold reboot. Change-Id: I5c7a4a3871a3bff69c1136379c78a8368c6258a6 Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-11-28AMD platforms: Fix ASL comment that implies "\_SB" is southbridgeMartin Roth
Change-Id: I6ee86396a1c5aaee248a275b42da801cedace586 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-28mb/google/poppy/variants/nautilus: correct the SIO_EC_ENABLE_P2SK typoChris Wang
correct the typo from SIO_EC_ENABLE_P2SK to SIO_EC_ENABLE_PS2K. BRANCH=master BUG=b:66462881 TEST=compiled/boot to ChromeOS. Change-Id: Iaded458e202bc975c73cd295f7b363e2c9bfa861 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-28mb/google/poppy/variants/nautilus: remove ALS for nautilusChris Wang
nautilus doesn't support ALS. remove the definition from ec.h. BRANCH=master BUG=b:66462881 TEST=compiled/boot to ChromeOS. Change-Id: Ib357328799015f78b18cd260db221e524e98cef7 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-28mainboard/google/kahlee: Update Grunt for 16MB ROM chipMartin Roth
- Update Grunt to 16MB chip in Kconfig. - Move chromeos.fmd into variant directory & update Kconfig with the new location. - Add Grunt specific chromeos.fmd file. BUG=b:69691210 TEST=Build grunt; Build & Boot Kahlee Change-Id: I8d2f5e3255984d0d9a18df560f84f6db03b73a78 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-11-28mainboard/google/kahlee: Update chromeos.fmdMartin Roth
- Remove SI_ALL section. This is no longer needed as the PSP dirctory is placed into the RO coreboot section. - Add 1MB Legacy section. - Add Memory cache section. These sections are called "MRC", which is an Intel term, but AMD platforms will use the same regions for saving the same sort of data. BUG=b:65497959, b:67035984 TEST=Build & boot kahlee Change-Id: I5e41a0aa6bd4b29b8014c6559126a29cd7ed45d8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-27google/fizz: correct memory rcomp settingsKane Chen
Follow the schematic and Doc 573387 to correct the rcomp and rcomp target settings for fizz TEST= boot ok and the system can enter and resume from S3. Change-Id: Iffa90461509cfadaca20e335a6655e549e79e749 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/22479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-25google/fizz: Remove tpm i2c configs from KconfigShelley Chen
We are disabling tpm over i2c, so the configs are not needed anymore. BUG=b:65056998 BRANCH=None TEST=emerge fizz and make sure can still boot up. Change-Id: Id88f32fa952801749544534442fc15d85fc1a892 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 06:41:30 +0000