| Age | Commit message (Collapse) | Author |
|---|
|
Update DPTF parameters from internal thermal team.
BUG=b:180875582
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Change-Id: I6d87bc63a66ff38bc2f706d58b8537c052bf4594
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Configure I2C high / low time in the device tree to ensure I2C
CLK runs accurately between 380 kHz and 400 kHz.
Measured I2C frequency just as below after tuning:
touchpad:390.4 kHz
BUG=b:192601250
BRANCH=dedede
TEST=Build and check after tuning I2C clock is between 380 kHz and 400 kHz
Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Change-Id: Ibe1603a48a3e841b6a50aa0c703697ec615b2854
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
There is a 16 MB flash chip on mc_ehl. Set the ROM size accordingly and
provide a flashmap for partitioning. Select the used flashmap on variant
level to allow different layouts for different variants.
Change-Id: I694729ad98f91e27308220903c49e7cb7fc436b4
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Remove Kconfig switches that are not needed for mc_ehl based mainboards.
Change-Id: If231f37f06c6763d52a821799e87fdb3010af0aa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
According to stardust test tracking report to adjust
telemetry setting.
VDD Slope : 30595 -> 30400
VDD Offset: 77 -> 317
SOC Slope : 24063 -> 23789
SOC Offset: 105 -> 94
BUG=b:190338440
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: Id997f9cd220d704c5b0882c257a596fb3d2485ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
|
|
There will be more variants of this mainboard so prepare the scheme for
Kconfig to handle the variants properly.
Change-Id: If1cf418836d77a45955ee55d30ba670db8ff2533
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add a new mainboard called mc_ehl which is based on Intel's
'elkhartlake_crb'. This commit simply copies the mainboard directory and
adjusts the naming to match the new board's name. Follow-up commits will
introduce the needed changes for the new mainboard.
Change-Id: Ia7c0616098046d975aa698910ac81f435d7882cb
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
camera ACPI
This change updates device tree to enable SSDT generation for
world facing camera and user facing camera for ADLRVP.
Also reverts DSDT changes related to both camera.
TEST=Build and Boot aldrvp check i2c enumeration and output of media-ctl
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I39f82dc9eb91496d80479ae3f59ca5e03402a599
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
ACPI
This change updates device tree to enable SSDT generation for
world facing camera and user facing camera for ADLRVP.
Also reverts DSDT changes related to both camera.
TEST=Build and Boot aldrvp check i2c enumeration and output of media-ctl
Compared SSDT with this patch against DSDT without this patch, they are same
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I08834bbcf80dc46737de07f69a2402ed6bf93d4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
The caller is already passing the address to the required LTE reset and
enable GPIO. During memcpy, the address to that pointer is used which
will lead to copying undefined data. Fix the pointer/address used in
memcpy.
BUG=None
BRANCH=dedede
TEST=Build Kracko, Drawcia and Metaknight mainboards which use this
function.
Change-Id: I79d6d9af03acd59ab5e1cd7df97bf451011dfeaa
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Found-by: Coverity CID 1458053, 1458054.
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56046
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch sets the optimized FIVR configuration for adlrvp cutomized
based on the pnp measurements to achieve the better power savings in
sleep states.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 states.
* Update the supported voltage states.
* Set the ICC max to 500mA for v1p05 and vnn.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I83e6910502d5cf9d4c26fa581272f59ac483ae19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
brya0 is a reference and development platform, therefore it would be
helpful to have Crashlog enabled.
Change-Id: I936e73e808e0a05e8b7822cddbb5ee3fa7dee13e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
The brya EC supports S0ix hang detection, but it was not enabled in
coreboot as well, masking that event out of S0ix, therefore add it in to
the EC S0ix wake mask.
TEST=After EC prints "Warning: Detected sleep hang! Waking host up!",
the host actually wakes up
Change-Id: I2c699114abcd9a045a41858c731e4b6fe99d3000
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Cret doesn't support SDCard. Disable SDCard contorller for Cret.
BUG=b:191232222
TEST=Build and boot to check lspci
Cq-Depend: chromium:2993724
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I889f0545883aa75813dd91dc3e6a4dcfc246687f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Allow to use the 2nd COM port of the AST2400 which can be also used via
IPMI/serial-over-lan.
Change-Id: I6f9c85b1f5428d3c3acf7a2f20296134c4611b1e
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add G2 touchscreen support for magma.
BUG=b:189852808
TEST=Build and verify that touchscreen works.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I3e032bff7f3e97f54f3e544035e862058ea0dbfc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Add SPD support to eldrid for DDR4 memory part MT40A512M16TB-062E:R.
Eldrid should use DRAM_ID strap ID 0 (0000) on SKUs populated
with MT40A512M16TB-062E:R DDR4 memory parts.
BUG=b:192380070
TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds
successfully.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I4d07727c9c41bf494fbef373abce0ac1fc65c316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55983
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Scout-specific changes to puff reference following bring-up
- copy baseline changes from genesis
- update GPIOs
- update PCIe ports for TPUs
- remove LSPCON
- enable eMMC
- disable touch I2C
- enable uart
BUG=b:187078663
TEST=boot scout
BRANCH=none
Signed-off-by: Jeff Chase <jnchase@google.com>
Change-Id: Ic3cb9cf515ab7a4a0ebbee249644dd3f133d8735
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
P-sensor is swap by the latest schematic. Thus, swap the IRQ for correct
P-sensor.
BUG=b:192331122,b:181555900
TEST=check P-sensor driver can be probed without error.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I3ccb31c1925e476e2ebb34b2439a491759472405
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Do not call `pci_assign_irqs` with a NULL device pointer.
Change-Id: Ide9ae38dedd881ed673ba1838a1e29529b306937
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tidy up the code that programs the PAM (Programmable Attribute Map)
registers. Introduce the `D0F0_PAM` macro and use it to replace the
magic `0x59` and `0x5a` values in the code. Adjust the range of the
for-loop to work with the `D0F0_PAM` macro, and properly indent the
loop's body.
Change-Id: I9036425d726ffb69737ea6ed36c7a8f61d9d040a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Mainboard information can be found in the included documentation.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: Idb696193e5a67c42adf45e54d455d2dff7681ca7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Return the HSI version read from BMC in smbios_mainboard_version.
Change-Id: If907d598c9e05d35f8898d294678f61d075f935a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55712
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Create the cappy2 variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:192035460
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_CAPPY2
Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com>
Change-Id: I772801152b9ca9c2c6afe76a353cb2b62d6210ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
upgrade
This changes updates mainboard properties by adding DFP number and
power_gpio for each DFP.
Reference CB:55348
BUG=b:191897776
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I63c912980530e5c9f341bdbab18c07685fd77abf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add LTE modem to devicetree.
Configure GPIO control for LTE modem by fw_config.
Update LTE USB port configuration at run-time after probing FW_CONFIG.
By default the concerned USB port takes the Type-A port configuration.
BUG=b:186393848
TEST=Build image and check with command modem status
Change-Id: I20450ae37e5047dba67211316515994bd2a09600
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update LTE USB port configuration at run-time after probing FW_CONFIG.
By default the concerned USB port takes the Type-A port configuration.
BUG=b:178092096
BRANCH=dedede
TEST=Build and boot to OS to check LTE by modem status
Change-Id: If12cc29ddda6d5c32c0bda840a3680e7bf932f89
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54671
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace uses of `smbios_type0` with `smbios_header` for correctness.
Change-Id: I2479984f5322f0fb474ff1707c1dd1f5885f30e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Introduce the `smbios_full_table_len` function to consolidate table
length calculation. The case where the length of a table equals the
length of the structure happens when a table has no strings.
Change-Id: Ibc60075e82eb66b5d0b7132b16da000b153413f9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Factor out some boilerplate code into a helper `smbios_carve_table`
function, which zeroes out the table memory and fills in the header
fields common to all tables.
Change-Id: Iece2f64f9151d3c79813f6264dfb3a92d98c2035
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
The initial value of `len` is never used. Declare and initialise all
local variables in a single statement to avoid this problem.
Change-Id: Ieb96758f4cd19d9d3f8fdc543e8ca17db06a2123
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Where applicable, use the size of the associated variable.
Change-Id: Ibbac2a82893232a6f87182a6a965b84a599d633e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
init overridetree.cb based on the schematic carbine_adl-p_proto_20210618_proto final.pdf
BUG=b:191213263
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I3f6875ef438b147436605629445d346a56896a87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
set GPP_C3 and GPP_C4 as NC since LAN function removal.
BUG=b:190643562
Change-Id: I21214d0a2904ba4347fbbbc74237aca6db22c345
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55933
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable PCH GBE with following changes:
1. Configure PCH GBE related FSP UPD flags
2. Use EHL own GBE ACPI instead of common code version due to
different B:D.F from the usual GBE
3. Add kconfig PMC_EPOC to use the PMC XTAL read function
Due to EHL GBE comes with time sensitive networking (TSN)
capability integrated, EHL FSP is using 'PchTsn' instead of the
usual 'PchLan' naming convention across the board.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: I6b0108e892064e804693a34e360034ae7dbee68f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
google_chromeec_get_event returns 0 for no event. Return
EC_HOST_EVENT_NONE=0 to improve readability.
BUG=b:184074997
TEST=Build and boot guybrush without error
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: Ic08ed9ccdd7c0023d0fe8b641fcf60dca495a242
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adds fine-tuned USB2 PHY parameters for storo.
BUG=191089827
TEST=Built and verified USB2 eye diagram test result
Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Change-Id: I38dd8ad59b32f635e641765e0a1bd13651180d23
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:190027970,b:178175837
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Change-Id: I7084f9b7be2b66adda2d9d5a83ce5dd9c31d01b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Set GPP_B3 to APIC mode to avoid PCI IRQ conflict.
BUG=b:181555900
TEST=check dmesg there are no IRQ request errors like below.
genirq: Flags mismatch irq 27. 00002008 (sx932x_event) vs. 00000080 (idma64.1)
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Idf88fae9e244858445c45e66e26715cebe0c93ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
To set the Fibocom 850-GL module to USB mode, it needs to be disabled
when PCIe training happens, or it will automatically switch to PCIe
mode. This patch makes sure it's shut down when training happens in
FSP-M. It will be brought up in ramstage and will be available for USB
enumeration later.
BUG=b:187316460
TEST=Run lsusb from the OS and see that the Fibocom module is present
on USB.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I153eb6cd7c3a0e2cc3b71c99f76db3e565173cfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This configures the romstage portion of the PCIe GPIOs in the correct
sequence to meet the power-on timings.
The PCIe_RST line is anded with the Aux reset lines, so to take the PCIe
devices out of reset, both need to be brought hign.
BUG=b:184796302, b:184598323
TEST=Verify timings between GPIO init sections. All available modules
are present after training.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ib1990bba31c84827467d4ff8a15f1e0682501e70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54741
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This configures the bootblock portion of the PCIe GPIOs in the correct
sequence to meet the power-on timings.
Setting the PCIE Reset happens in coreboot instead of in the FSP.
The Aux reset lines are anded with the PCIe RST line, so both have
to be brought up together. On v1 of guybrush, the PCIe reset line
also resets EC communication, so it must be brought up immediately on
that version.
BUG=b:184796302, b:184598323
TEST=Verify timings between GPIO init sections. All available modules
are present after training.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I2d0b812b654b0cd317a2c8c1ce554e850c96be44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
New kconfig parsers interpret $(var) themselves, leading to empty
fields. Old kconfig understands \$(var), so use that.
Change-Id: I927fc9dc7a66211bfe51d4324cf7c51b555ea3a8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55912
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add configs for Herobrine variants. Also enable ec sw sync as this
should not be disabled by default.
BUG=b:182963902
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_SENOR -x -a -B
./util/abuild/abuild -p none -t GOOGLE_PIGLIN -x -a -B
Change-Id: Ide4e375aa0236dce65a954a2f68455d05fa841eb
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Utilize the SOC_AMD_COMMON_BLOCK_GRAPHICS_ATIF option to provide
full range backlight settings to the kernel.
BUG=b:190443612
Change-Id: If071b701c383e3a6b78bf45a562f5a9b31397835
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
1. Add 2 port 2 endpoint
2. Add support for OVTI5675
3. Guard entries in override device tree by FW_CONFIG
MIPI UFC is on I2C2
This configuration is as per P2 schematics
BUG=b:190674542
TEST=Build and Boot on Brya
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: Id3ef974994fd0d447e398b365cdf01d78c94cc4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
When initializing eSPI early, guybrush has requirements to configure the
bus properly. Those are normally run in bootblock_mainboard_early_init,
but when setting up eSPI early, those have not run yet.
BUG=192100564
TEST=Build along with previous patch, eSPI works on guybrush
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ifec6113d48aea0bb5efe47909e4faf0161148a99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55864
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable G2 touchscreen support for Volet.
BUG=b:185097280
TEST=emerge-volteer coreboot chromeos-bootimage
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: I907356448b5d5cbf3974717654ea09cd995962f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55835
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To reduce power load, set unused GPIOs to NC and close
unused interface in devicetree. GPIOs and
interfaces are as below:
GPIO: GPP_C18/C19/D12/D14/D15/D19/D20/D21/E00/E02/H06/H07
Interface: I2C1/I2C3/I2C5
USB: port2_3/2_4/2_6
BUG=b:185044041
BRANCH=dedede
TEST=Built bios and test, it reduces power load without affecting
device function.
Change-Id: Ib5999f0e129bf3e660fe293eda7af3e8e1426151
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ben Kao <ben.kao@intel.com>
|
|
UFC on brya can be USB or MIPI
Add FW_CONFIG bit for this option
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I2f1492d7c769aba8da80763124dda474b32cfbfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This changes updates mainboard properties by adding DFP number and
power_gpio for each DFP.
Reference CB:54292
BUG=b:186521258
TEST=Updated BB retimer FW from 3.4 to 3.5 without any device
connected.
Change-Id: I24a02fd446cb66bda9e66e59802b4deea6894273
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Update DPTF parameters from internal thermal team.
BUG=b:180875580
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Change-Id: I4dbe3947779395903d7999627948d3e97d6cc985
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add cs42l42 codec support in cret.
BUG=b:188623237, b:189073353
TEST=Build and boot to check functional with cs42l42 EV board.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I2c53291e07fd785c1360c05171eed634788bc665
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55091
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This provide a more consistent mechanism to enable corresponding USB
TCSS port.
BUG=b:182960979
TEST=Boot device, Type C port should operate correctly.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Iadc0df2e6e19a5afacbb7db1ae0bc7546dbcdc1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55772
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update DPTF parameters from internal thermal team.
BUG=b:190518303
BRANCH=None
TEST=emerge-dedede coreboot
Change-Id: I4005047e0c5f39a12c161a92fbd0afaaec1dc976
Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com>
|
|
Support audio AMP selection with fw_config.
BUG=b:188446060
BRANCH=None.
TEST=built pass
Change-Id: Idf0eb2a87bfa9665e61d185e37adb90987f3cefb
Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com>
|
|
Modify driver from hid to generic(ELAN0001 that used
generic driver without hid).
BUG=b:191620724
BRANCH=dedede
TEST=build bios and boot, touchscreen will work properly.
Change-Id: Ife77d514d9906049f237edd169bc07bb53c48579
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
|
|
init overridetree.cb based on the schematic ver MB_20210616C.
BUG=b:191897776, b:191897775
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I185b36e34d24b703092e3798e91c70ce3912b11f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
CB:55452 uses FMAP instead of "cbfs master header".
The flash size statement in vboot-rw.fmd does not contain the start
address, resulting in a non-booting system.
Add start address to FLASH statement.
BUG = N/A
TEST = Boot Facebook FBG1701
Change-Id: Id05ad33babb416a37c657b25cdb1e98d47c1a56d
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
0xf7f000 - 0x1000 = 0xf7e000, not 0xf6f000.
This fixes build failure when selecting the option to validate the
layout using the flash descriptor (CONFIG_VALIDATE_INTEL_DESCRIPTOR)
Test: build google/casta successfully with IFD validation selected
Change-Id: I6df67f76f5d766a9f4f85ffc3e1f0de4a241f509
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55815
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The CBnT provisioning tooling in intel-sec-tools are now cbfs aware
and don't need to have a fixed size at buildtime.
Tested on OCP/Deltalake with CBnT enabled.
Change-Id: I446b5045fe65f51c5fa011895cd56dbd25b6ccc7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55821
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christopher Meis <christopher.meis@9elements.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds mem_parts_uesd.txt that contains the only
memory parts used by primus for Proto build and Makefile.inc
generated by gen_part_id.go using mem_parts_used.txt.
BUG=b:186091208,b:189169995
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I423fd9ad4349c51c6e6b166734ae706509d6ac3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
gpio and devicetree settings
add memory configuration for chronicler,
based on schematic and gpio table, update gpio and devicetree settings for chronicler.
BUG=b:187318819
BRANCH=None
TEST=FW_NAME=chronicler emerge-volteer coreboot chromeos-bootimage
verify bootable with chronicler
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: Id5524b97a236dcc64d18ab1cd2ce13f6bb2d998f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55340
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Error Could not add [key.vbpubk]: too big occurs, when Eltan verified boot is enabled.
Update value of VENDORCODE_ELTAN_VBOOT_KEY_LOCATION.
BUG = N/A
TEST = Boot Facebook FBG1701 with Eltan verified boot enabled.
Change-Id: I1faecd189915985df633ac74627fd872ce8867f0
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:191213716
BRANCH=octopus
TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check
whether device tree is updated correspondingly by disabling unselected
one.
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I2d5738442d2c173fd5b4802d8b5dff76b428c6f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55564
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To avoid from using same the name AMDI5682 as Zork, changing to use
AMDI1019. The corresponding kernel change is on CL:2929864
BUG=b:189297564
TEST=Audio works with the corresponding kernel change.
Cq-Depend: chromium:2929864
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@google.com>
Change-Id: Ie89302f3b6cd3edb8253b909fde4722c2ea1e102
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55508
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This motherboard is almost identical to the ASUS P5QL PRO,
with the only noticeable difference being that the ASUS P5Q SE
has a P45 MCH while the P5QL PRO has a P43 MCH. Few changes were
required.
Signed-off-by: Hunter Sell <alicelyralain@gmail.com>
Change-Id: I36612bac16a79f05f3fe57e535e4ba3c73790a86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add Makefile.inc to include three generic LPDDR4 SPDs for the following
parts for Gimble:
DRAM Part Name DRAM ID to assign
MT53E512M32D2NP-046 WT:E 0 (0000)
H9HCNNNCPMMLXR-NEE 1 (0001)
H9HCNNNBKMMLXR-NEE 0 (0000)
BUG=b:191574298
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I60f95ac5ed7f3134882f6580335ec33632676796
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Set the GPIO configuration of gimble
BUG=b:191213263
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I667943578a2bf58cc5841564b8df5b6469d7594b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55717
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
New boards introduced to trogdor family.
BUG=b:191800434
BRANCH=none
TEST=make
Change-Id: I93b74e79188bd0cc36c8b48e552230ae0d6f593a
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch updates mainboard_memory_init_params() function argument from
FSPM_UPD to FSP_M_CONFIG. Ideally mainboard_memory_init_params()
function don't need to override anything other than FSP_M_CONFIG UPDs
hence passing config block alone rather passing entire FSP-M UPD
structure.
Change-Id: I238870478a1427918abf888d71ba9c9fa80d3427
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Temporarily set eSPI mux in verstage_mainboard_early_init.
Ideally cezanne code should have common function to do this and
mb-specific code would just call it, but for now PCI access doesn't work
in the PSP so we can't do it.
AMD team confirmed that the current PSP doesn't configure LPC so we
don't have to disable LPC when configuring eSPI mux so we can
temporarliy skip the LPC part here.
BUG=b:183149183
TEST=boot guybrush with psp_verstage
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I8317409fa5efd1adffc184d75affbb4d305183f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Iab58edd019ccf9130e96fae55f147ab20cd0f45b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55751
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initialization of DPM drvier used by DRAM calibration test.
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com>
Change-Id: I8bd10864267dfa4db8528d40483eccee2d05c1d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add initialization of mt6360 drvier used by DRAM calibration test.
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com>
Change-Id: Id74835d8395afac9e7e2c987a0a033f1b524fbfb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
In order to enable ACP DMIC hardware runtime detection, indicate that
ACP DMIC is present.
BUG=b:182960979
TEST=Build and boot to OS in guybrush. Ensure that the _WOV ACPI method
is populated in the ACP device.
Change-Id: I9a53d158ed08a6b46c29bcb8fe3a2a0d108bd6cd
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55030
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This takes the "generic" AMD firmware config file from the cezanne
directory and removes pieces unnecessary for guybrush.
Removed:
- PSPTRUSTLETS_FILE TypeId0x0C_FtpmDrv_CZN.csbin
- PSP_MP2FW0_FILE TypeId0x25_Mp2Fw_CZN.sbin
- PSP_KVM_ENGINE_DUMMY_FILE TypeId0x29_KvmEngineDummy.csbin
- DRTMTA_FILE TypeId0x47_DrtmTA_CZN.sbin
- PSP_MP2CFG_FILE MP2FWConfig.sbin
BUG=b:187103438
TEST=Build & Boot
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I5a0ed1edd7616a890f906b7f3e4a7d364758ca47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add weida touchscreen support for magister.
BUG=b:191633024
BRANCH=dedede
TEST=Build and verify that touchscreen works on magister.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I3de6a84d2d58ef87f0ae13e8a117a980a0210ac4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Randy Lai <randy.lai@weida.corp-partner.google.com>
|
|
Use drivers/i2c/hid can't update firmware by kernel update script,
so change to drivers/i2c/generic.
BUG=b:188602529
BRANCH=dedede
TEST=can update ELAN touchpad firmware(277.0_1.0) by kernel script
Change-Id: I3592403fe5d0f8d0f67059f8296277e3c028c117
Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55248
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This selected by default if 3rdparty/fsp is used. There is no need to
override this behavior in the mainboard Kconfig.
Change-Id: I01ee2e90e0eceaa3100d911b5460cf99f413b185
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Config items depends on USE_VENDORCODE_ELTAN but are VBOOT specific.
Correct dependency of these items on VENDORCODE_ELTAN_VBOOT.
BUG = NA
TEST = Boot facebook FBG-1701 with possible combinations of Eltan
security.
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Change-Id: Icd1c3e5c70ca562190308752f45aac734826649a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52132
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set "SerialIoUartMode" for UART0 as PchSerialIoSkipInit
Change-Id: Idc7da7bf38634c04b0f4acd4c7c2ea9fa88545e5
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55207
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PSP_Verstage will enable eSPI early in the boot sequence. If the
platform isn't using psp_verstage, the system can hang on the first
port 80h postcode that comes out because they aren't routed to an
active device until eSPI is configured.
BUG=b:191370340
TEST=Build without PSP_Verstage, verify system doesn't hang.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I37fbb251cd79609b856c4480ca29ce94b08897d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55738
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
dmidecode output should match with the CrOS kernel updated string.
TEST=dmidecode grep "Manufacturer" = Intel Corporation
dmidecode grep "Product name" = Alder Lake Client Platform
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I7cce423de624e7056e88b52a1443c554fd9123bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51408
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the GPIO configuration of primus
BUG=b:190643562
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I405561ae8a44d95ffdc526241f9c52761f67ed35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This motherboard is somewhat similar to the p8h61-m_pro, but also different.
It has two exposed RAM slots with a pinout for four, and it's an OEM
variant used in PCs ASUS sold in stores.
Signed-off-by: Hunter Sell <alicelyralain@gmail.com>
Change-Id: Id08349feb0aeaf21406f814f6d19bbe0d9312a4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
PEG bifurcation is strapped to x8/x8 on this board, but only the first
port is used. Disable the PEG device at 00:01.1 because it is unused.
Should fix booting with commit ae999503f62ef8a3b9b2756a2810d29c383a009e
(nb/intel/haswell/pcie.c: Add missing pre-ASPM init). The `config_of()`
function call added in that commit makes coreboot die if any PEG device
that is enabled by strapping is not present in the devicetree. While it
is true that the PEG code should not use `config_of()`, this PEG device
should still be disabled on this board as it is never used.
Change-Id: I16809e081f9a56ba2f1fdfcb4b8289d75161056b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
|
|
Visually align devices and corresponding comments in the devicetree.
Tested with BUILD_TIMELESS=1, Lenovo T440p remains identical.
Change-Id: Id6f521275ffd0b35c247152dc9293c4182c4a96d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Remove some redundant parts of devicetree comments. This used to happen
when using autoport, but has been fixed at some point.
Tested with BUILD_TIMELESS=1, Lenovo T440p remains identical.
Change-Id: Ie24b5430c7771c9ce4dda6c9a10d70ee9000df7c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
An error in script did not set the attribute properly:
- Entry CS0 is not used as sensor, but as ground,
- Entry CS1 is used as the startup sensor.
This fixes a regression caused by commit
689c25b9d6 (drivers/i2c: sx9310: Replace register map with descriptive names)
EQ=b:173341604
BRANCH=volteer
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Change-Id: I92c01209031e9a917d95b1cb2537b0ce7b93e66d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51893
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update DPTF parameters from internal thermal team.
BUG=b:180875582
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Change-Id: Ica2f2856000c8dcbf4d23b7b4a3c479dc7d4862b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Add devfn macros for some peripheral devices that are attached to PCIE
GPP Bridge.
BUG=None
TEST=Build and boot to OS in Guybrush.
Change-Id: I7c5433dff2329f13c282908e2b848405819347ff
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Enable Acoustic noise mitigation for blipper and set slew rate to 1/8
which is calibrated value for the board.
BUG=b:187760191
BRANCH=dedede
TEST=build firmware to UPD and Acoustic noise test
Change-Id: I187702c23712416eaaaaf1e210dcfc6b2c560041
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
- set subsystem/subvendor ID to Realtek default, as the one dumped
from the vendor UEFI firmware provides no advantages
- Add a codec reset before setting the subvendor ID using the Azalia macro
for consistency with all other Realtek HDA codecs
- disable jack detect for the external mic on the 3.5mm jack, since it's not
currently working, so that the external microphone can be manually selected
Change-Id: Ib0f99e5088973a721c0a295899012c9aea5009cf
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
- set subsystem/subvendor ID to Realtek default, as the one dumped
from the vendor UEFI firmware provides no advantages
- fix the number of verb entries, which excluded the 4 following the
pin configs
- issue the reset *before* setting the subvendor, and use the Azalia macro
- disable jack detect for the 3.5mm jack, both line out and mic, since
it's not currently working, so that the outputs can be manually selected
Change-Id: Icd961c3c5aec23cf61d6a9ad65c603c6dc04697a
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable FastPkgCRampDisable for all domains, set SlowSlewRate to fast/16
for all domains. This aligns the settings with the Librem 14.
Test: boot Librem Mini v2, observe high frequency acoustic noise reduced.
Change-Id: I10bc2a3e6b631b8c0b430e204f376aa9a81ac683
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Decrease SA slew rate to match other domains and reduce
high-frequency noise slightly.
Change-Id: I02cd93481f6bfba6249cb338a0e2f47d471a438e
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Only enable fingerprint device when FP=FP_PRESENT in FW_CONFIG.
BUG=b:186685292
TEST=Boot guybrush, no "EC failed to respond in time" error
Change-Id: Ifaea9e23e6cdfdae024464ff36c1520b8ad05e50
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
On dedede boards without Cr50, the CrOS Board Info (CBI) EEPROM write
protect signal is decoupled from the hardware write protect signal.
Instead, we'd like for it to mirror the software write protect status.
This commit simply checks the software write protect status of the SPI
flash and sets the CBI EEPROM write protect if it's enabled. To prevent
changing the WP signal at run-time, the GPIO configuration is also
locked down after the level has been set. If HW WP is deasserted, the
CBI EEPROM WP will be deasserted as well.
BUG=b:191189275,b:184592299
BRANCH=None
TEST=Build and flash lalala, disable SW WP by running `flashrom -p host
--wp-disable` from a root shell and verify that the GPIO is asserted
after a reboot. Export the gpio via sysfs and verify that attempting to
change the value of the GPIO is futile. Enable SW WP via `flashrom -p
host --wp-enable` and reboot the DUT. Again, export the GPIO via sysfs
and verify that attempts to change the GPIO value are futile.
localhost ~ # iotools mem_read32 0xfd6e08d0
0x44000200
localhost ~ # cd /sys/class/gpio/
localhost /sys/class/gpio # echo 217 > export
localhost /sys/class/gpio # cd gpio217/
localhost /sys/class/gpio/gpio217 # echo out > direction
localhost /sys/class/gpio/gpio217 # cat value
0
localhost /sys/class/gpio/gpio217 # echo 1 > value
localhost /sys/class/gpio/gpio217 # cat value
1
localhost /sys/class/gpio/gpio217 # iotools mem_read32 0xfd6e08d0
0x44000200
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: Ic103037921ec7d2f96f86178675c11a3a1357d1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
To enable display, we have to:
1. Configure panel power and backlight
2. Configure eDP driver
BUG=b:189985956
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Change-Id: Ida6c157a6a3bd904d3fa3dd2001385ced34f7711
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55574
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
