| Age | Commit message (Collapse) | Author |
|---|
|
Configure eldrid to use CSE Lite.
BUG=b:158140797
TEST=cd to volteer's asset_generation folder, execute
"./gen_all_variant_images.sh" and verify that all variant
images are produced.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I357abdac4102f358d3aa1cb50f600312039ef140
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
For Volteer (and future Tiger Lake boards) we can enable mode S0i3.4
only if we know that the Cr50 is generating 100us interrupt pulses.
We have to do so, because the SoC is not guaranteed to detect pulses
shorter than 100us in S0i3.4 substate.
A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code
running in verstage, which will program a new Cr50 register, provided
that Cr50 firmware is new enough to support the register.
This CL adds code to detect the case when Cr50 is unable to generate
longer pulses, and in that case explicitly disable the S0i3.4 substate
as well as setting gpio_pm_override to all zeroes. This will increase
power usage slightly, but guarantee that the GPIO block in the SoC
does not switch to a slower sampling clock. In practice, this case
will only be encountered in the factory, before the Cr50 chip is
updated to a new RW image.
(Prior to this change, the gpio_pm_override was hardcoded to zero for
Volteer, but the S0i3.4 substate was not disabled. According to my
conversations with Intel engineers, that was not enough to guarantee
detection pulses shorter than 100us. But it is entirely possible that
we have just been "lucky" that the SoC has not gone into low power
mode during the boot process, where most of the cr50 communication
happens.)
TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x
BUG=b:154333137
Change-Id: Idef1fffd410a345678da4b3c8aea46ac74a01470
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add DTT (Dynamic Tuning Technology) support for Jasper Lake based rvp board.
Set power limits and CPU sensor thresholds for DTT based thermal control.
BRANCH=None
BUG=Noe
TEST=Build and boot on jslrvp board
Change-Id: I41409c70d8472c54ca452fc98d5ee9edf3ccd307
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Support 4GB Samsung K4UBE3D4AA-MGCR discrete DDR bootup.
BUG=b:162379736
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Change-Id: I2f4f084ece067e9884c23004506b450a281a77a6
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45101
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the dooly variant of the puff reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.2).
BUG=b:155261464
BRANCH=puff
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_DOOLY
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Change-Id: I8e714cc9bf4a49266da77db88f8c4a3ca45878d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
3.6 schematic will separate TS power from eDP PP3300 to GPIO
for power control and correct GPIO assignment from GPIO_90 to
GPIO_32 instead.
BUG=b:161579679
BRANCH=zork
TEST=emerge-zork coreboot
Change-Id: Ieef67e1d04201c5d9e1dc625c519e6d0307c55f0
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ie663d424edbbeeb8f5691b00f3977f7501e9ab45
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Change-Id: Idd38ab530fd8a0c16231f3499eac393c333a9a92
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Change-Id: I8db3bfbdb557a84413408b4b39a13b24c45497cc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Change-Id: I3371bed7c2678fbc3304f53af1413a93462933f5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Enable SataPortsDevSlp for SATA ports 2 and 3.
Change-Id: Id6c69f4a6fe45cb5c6aad3f42c741a2724c6166c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Change-Id: Idf64d98b36ca95a8bc17a6544993c26e23851cd8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Change-Id: Ic5587402700d7b137e20538549b8a09a64cb6a9f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Enable the I2C HID driver, configure I2C bus 0 and add the touchpad
device to the devicetree.
Tested on lemp9, touchpad confirmed to use i2c-hid driver in Linux
instead of PS/2.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Ic3a90fda134b1d53f28ab687b3033ec52fee843b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43623
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop duplicated code for spd.bin generation that is provided globally
in lib/Makefile.inc.
For all affected boards it has been verified that the output binary
functionally matches the original one. The changed execution order of
Make instructions influenced the cbfs file order. Hence, the rom images
can't be compared directly.
Thus, the output files of the two timeless abuild runs have been compared.
Further, it was verified that the final files in cbfs stay identical, by
comparing the extracted cbfs of each board.
The boards (possibly) needing modification could be found with something
like this (with false positives, though):
find src/mainboard -name Makefile.inc | \
xargs egrep 'SPD_BIN|SPD_DEPS' | cut -d: -f1 | sort -u
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Icd3ac0fd6c901228554115c6350d88bb49874587
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
_GPE cannot be anywhere but at the root of the ACPI namespace.
This change ensures that is always the case.
Tested on lemp9, GPE still in correct location.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Ib31683b06e61da4b1859cd939c36879cebf4c03c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43630
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs required for DeepSx (e.g. SLP_SUS#) are not hooked up on the
lemp9. Therefore, drop the DeepSx settings.
Tested on lemp9, suspend works correctly.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Iab179abd7adc3a65dcfc43ce1b5742d514b711fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43629
Reviewed-by: Michael Niewöhner
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on lemp9, SA thermal device appears in lspci.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I527e586b1dae5f8087d2364c63c9db5bcb643214
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner
|
|
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset
devicetree settings default to 0 and the OC pin now only gets set when
the USB port is enabled (see CB:45112).
Thus, drop the setting from all devicetrees.
Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Don't configure USB3 port 4 since it's not used.
Change-Id: I6919f5ec3a5be53373f2ab75063764287b53baf5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Michael Niewöhner
|
|
CPU_INTEL_HASWELL is already selected at nb/intel/haswell/Kconfig.
Change-Id: I608286aae72bc740be642a72109472fb235f37bf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Currently HECI3 gets enabled by the option Heci3Enabled, but this
duplicates the devicetree on/off options. Therefore depend on the
devicetree for enablement of the HECI3 controller.
All corresponding mainboards were checked if the devicetree
configuration matches the Heci3Enabled setting, and divergent
devicetrees were adjusted.
Change-Id: Ic7d52096aee225c2ced1e1bc29ca850fe5073edc
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44579
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on the Lindar's schematic, generate memory settings.
util: rename lp4x spds to include "lp4x-" in name
BUG=b:161089195
TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage
Signed-off-by: Rasheed Hsueh <rasheed.hsueh@lcfc.corp-partner.google.com>
Change-Id: I1ec35d62f8ed21356329b78a614114edad78c2bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Michael Niewöhner
|
|
Since there are 4 different versions of FSPs for the Comet Lake
platform, add a new Kconfig option for the currently used SoC being able
to differ between the various SoCs and FSPs.
The new Kconfig option selects the Comet Lake SoC as base for taking
over its specific configuration and is only used for configuring the
path to its specific FSP header files and FSP binary.
Also, adjust all related mainboards so that their Kconfig selects the
new option.
For details, please see
https://github.com/intel/FSP/tree/master/CometLakeFspBinPkg
Built System76/lemp9 with BUILD_TIMELESS=1 before and after this patch
and both images are equal.
Change-Id: I44b717bb942fbcd359c7a06ef1a0ef4306697f64
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
GPP_F14 should be configured to be routed via APIC and not SCI.
BUG=b:162528549
TEST=verified on a volteer
Change-Id: Ie262ceeaea1c07bcc99e1545f5eb99e0d0dee905
Signed-off-by: Alex Levin <levinale@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44948
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Dual DDR4 Samsung K4AAG165WA-BCTD 16Gb x 8
BUG=b:165956925
BRANCH=zork
TEST=1. gen part id by gen_part_id
2. emerge-zork coreboot
Change-Id: Ia21a561e9b89feeccb6509d9280eaf52cfc2f5a3
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Some Trogdor variants power their USB hub from a PMIC LDO that is
already enabled by QcLib, and some have a discrete LDO that is
controlled by GPIO_84. For the latter, let's make sure we assert that
GPIO on boot.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I9d206cd7154ded3bf179e68c2b1421d0a8ee89f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: mturney mturney <mturney@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
|
|
We're moving a lot of pins around on Trogdor again. For firmware this
only affects the RAM and SKU strapping ID pins. Since there are quite a
few of the old devices in circulation this time and some people seem to
care about mosys RAM information working, let's actually check the board
revision and support both cases this time.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If7728d8ea4b7f6e7ff6721ade90f975f6efd5ddd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Update paramerters form thermal team.
2. Update PL2 Max/Min to 51W/15W.
BUG=b:167494420
BRANCH=puff
TEST=build noibat and verified by thermal team.
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Change-Id: Id96e681e9a990a1a1eaeb22781b1c60a7369118b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45020
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Set tcc offset to 5 degree celsius
2. Apply the DPTF parameters receive from the thermal team.
3. Change PL2 min value from 25W to 15W.
BUG=b:167477885
BRANCH=puff
TEST=build and verify by thermal team
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I68fdefe99cf36a39797c29ad84d08321bb8175f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
DRIVERS_INTEL_WIFI is already set to yes.
Change-Id: I09f628a9c1feb8992b6fe7c7ca93c75243ffc0f1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
This reverts commit 2ad859988b5243411393fdf3116eea281b92b1bb.
Reason for revert: broke the build
Change-Id: I7e7d917c2e8b698d5c7c3ce0b6d34e80696185f3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44993
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on the Lindar's schematic, generate memory settings.
BUG=b:161089195
TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage
Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com>
Change-Id: I75fb9254ec7aa40acc2e125f0c4fd31003d28be6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
1. Add new SPD file, "samsung_dimm_K4E8E324ED-EGCG.spd.hex".
2. Add SPD support in Rammus memory table, as follows:
SPD_SOURCES += samsung_dimm_K4E8E324ED-EGCG # 0b0110
SPD_SOURCES += samsung_dimm_K4E6E304ED-EGCG # 0b0111
BUG=b:166576463
BRANCH=firmware-rammus-11275.B
TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage
Flash FW to DUT, and make sure system boots up.
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I82386507c4e996e0a59c26ce50de3bced45b1196
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44854
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TPM2 set to yes by MAINBOARD_HAS_TPM2 at security/tpm/Kconfig file.
Change-Id: I815d545618e2e734f8e9b65731bbb4bed0b2d93d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BOOTBLOCK_CONSOLE is already set to yes in console/Kconfig file.
Change-Id: I2a4ee517795bc7b378afc5eae92e2799ad36111b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
GENERATE_SMBIOS_TABLES is already set to yes at src/Kconfig
Change-Id: I2845f4f329283360a49ea40dfee7d9a232ab4ea1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Modify the BOARD_SDRAM_TABLE_OFFSET as 0x10
BUG=b:162891673
BRANCH=kukui
TEST=make
Change-Id: I5a4794d6e899e35686c40a553b991643f9e35ea3
Signed-off-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jianbo Zhang <zhangjianbo@huaqin.corp-partner.google.com>
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
|
|
'CONSOLE_SERIAL' is already set to 'y' at src/console/Kconfig.
Change-Id: I350cf12a115c6ebe54a2b0821edc94c29db8d137
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
1. Apply the DPTF parameters receive from the thermal team.
2. Change PL2 min value from 25W to 15W.
3. Change PL2 max value from 64W to 51W.
BUG=b:166696500
BRANCH=puff
TEST=build and verify by thermal team
Change-Id: I53a4e8809369883c3ba77744fdc05fb510408209
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44903
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert 0X -> 0x
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Iea3ca67908135d0e85083a05bad2ea176ca34095
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch converts the current DPTF policies from static ASL files into
the new SSDT-based DPTF implementation. All settings are intended to be
copied exactly.
BUG=b:158986928
BRANCH=puff
TEST=duffy boots and dumped SSDT table for quick check.
Change-Id: I45987f44ec381917173f8d2a878edb50da454b4b
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Relative path to spd directory was wrong.
BUG=b:167175547
TEST=Boot Trembyle SKU 2
Change-Id: I63ae4f39ba69d2d80c25ac7383b6eb953901f56d
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44946
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIO_144 is REPORT_EN pin for the touchscreen controller where 1 means
enable operation and 0 means stop operation. Override tree exposes
this pin as stop GPIO. Thus, it needs to be configured as active low
i.e. 0 = active (stop), 1 = inactive (enable report).
Change-Id: I349123655260349b78d2f75f846da0ce1dc966fc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
v3.6+ of reference schematics have moved to using active low polarity
for touchscreen GPIO. This change sets the default polarity in
override tree accordingly to active low. To support boards from older
builds, variant_touchscreen_update() already updates the polarity to
active high.
BUG=b:161937506
Change-Id: I370bdb27ea5d0601612d13b515113a6048018964
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These changes are according to spd_binary_optimization_volteer_v0.4 sheet.
Offset Current value Updated value Analysis
1 0x10 0x11 As per SPD spec rev 1.1
5 0x19 0x21 16 bits for Row addrs, 10 bits for Column addrs
6 0x95 0xB5 4 die, 2 ch per pkg, Byte 16 signal matrix
12 0x02 0x0A 2 ranks per ch, 16 bits device data width
18 0x05 0x04 4267MHz support
29 0x90 0xC0 HW specific
30 0x06 0x68 HW specific
31 0xD0 0x60 HW specific
32 0x02 0x04 HW specific
125 0x00 0xE1 4267MHz support
BUG=b:159319534
TEST=Tested multiple cold boot cycles on TGL-UP3 with QS silicon
Change-Id: Ie506fbfe86a3ffb77763e8d9ef7e8aa69ea44bd3
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42524
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:155002684
TEST=emerge-dedede coreboot chromeos-bootimage
Change-Id: I87d8575131e745dec818bc5864ca6b21ce0825af
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Checked with the schematics that all PCIe clocks have a corresponding
clock enable pin.
BUG=b:149970243
BRANCH=zork
Change-Id: If96cdf95e213682217e46a98fc69c5c2ef4a148d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44892
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:149970243
BRANCH=zork
Change-Id: I0b31466c5a991b02cef3432942f8de45805fe546
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44891
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:149970243
BRANCH=zork
Change-Id: Ie3fc83484c6ce769956dc8e6e57194ffebb4f5b0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44890
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
dirinboz does not support stylus, config AGPIO4/5 to NC
to prevent unexpected wake event for s3.
BUG=none
BRANCH=zork
TEST=emerge-zork coreboot chromeos-bootimage
Change-Id: I3cfdeb326c3d3775148b2a00732c7d848dab35cb
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44894
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
berknip does not support stylus, config AGPIO4/5 to NC
to prevent unexpected wake event for s3.
BUG=b:162376046
BRANCH=zork
TEST=emerge-zork coreboot
Change-Id: I8d9b711ce1d7300181fe496d490dd33b38bc5983
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44893
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some Linux kernel drivers bind to "DMI quirks." In this case, the audio
fw_config is added as an OEM string, e.g., "AUDIO-MAX98357_ALC5682I_I2S"
so the audio topology can be correctly discovered.
But add all successfully probed fw_config items as well, because this
makes it easier to view what is selected from userspace.
BUG=b:161963281
TEST=With CBI FW_CONFIG field set to 0x201:
localhost ~ # dmidecode -t 11
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: DB_USB-USB4_GEN2
String 2: AUDIO-MAX98373_ALC5682I_I2S
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7b7586b0ebfe7b2fd888f448a50ae086364fa718
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I21378acd6408a4fae5600a54a41f695e54221dc2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44829
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ibc2446d7b8d4334e26ca6335179f50b7abe301cb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44831
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPP_F11 was in the early gpio table, but the definition was missing
from the main gpio_table. This change adds GPP_F11 to the gpio_table
array.
BUG=none
TEST="emerge-volteer coreboot" and verify it builds correctly.
Change-Id: I40f887300a9dfd4f8e790031b77bbee8a014f499
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Add Makefile.inc to include six generic DDR4 SPDs for the following
parts for Eldrid:
DRAM Part Name DRAM ID to assign
H5AN8G6NDJR-XNC 0 (0000)
MT40A512M16TB-062E:J 1 (0001)
H5ANAG6NCMR-XNC 2 (0010)
K4A8G165WC-BCWE 0 (0000)
K4AAG165WA-BCWE 3 (0011)
MT40A1G16KD-062E:E 3 (0011)
Add mem_list_variant.txt as a manifest of eldrid's DRAM parts for use
by gen_spd, the generic DD4 SPD generation tool.
Add dram_id_generated.txt to specify DRAM ID strap settings.
NOTE that Eldrid specified DRAM IDs for the first three parts to be 0
though 2 (i.e. no combined DRAM IDs for parts that use the same SPD).
BUG=b:161772961
TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds
without error.
Change-Id: Ica62e299ed40e60c2d5928b29ead5d2205b1af66
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44272
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4c7f23615bcfd9c2bda2cac8808544b98f8e25a2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib82689150689716bc9afdf8d4527a1dcd5deae56
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable TBT2 setting in overridetree.cb based on schematic.
BUG=b:165175296, b:166060548
BRANCH=none
TEST=Check all USB ports USB2 and USB3 both functional
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I23ecf76a3c2f631211b0ae2898707c68862b374b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Set tcc offset to 5 degree celsius for kaisa and duffy
BUG=b:166696500
BRANCH=puff
TEST=Build, and verify test result by thermal team.
Change-Id: I2bb977b98c0764f0b9cac3543074da56057717cf
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44901
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MODEM_CLKREQ / CNVI_CLKREQ has no external pull-down resistor.
When there is no M.2 card populated, the pin is floating. Thus
enable an internal 20K PD.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I37e0a9d7e9e0a8c8a7ac198abfd3995b8b0f9e3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Add CNVi and PCIe wifi devices to the devicetree and enable the wifi
driver and SMBIOS tables in Kconfig.
Test: both CNVi and PCIe wifi devices work fine
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I16e04dbbf5fc3a163ce5a2bb8de646877d5cbc0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43654
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rework the comments:
- fix wrong gpio / net names
- convert all comments to <gpio> / <net name>
- add more information where appropriate
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I51b552fd3255d5627dcc012e677bad51be517cf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43650
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert PAD_CFG_TERM_GPO with pull "NONE" to its shorter equivalent
PAD_CFG_GPO.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I9ed4d97ba184fa3e72425d5d16042a142b0640b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43649
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
INTP_OUT can be used as Type-C VBUS sense input/interrupt but is
currently unused in coreboot. It isn't a requirement for PD to work.
Disable it for now.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I233fbb562969487dff095ba6589fb9da3301ae4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43647
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable internal pull-ups for SATAXPCIE pads since there are external
ones at the M.2 slot's PEDET pins.
Test: both, SATA and NVME devices work fine on both slots
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I6be716620695ac38c44a17abe1c4de97b099b8d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43645
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are pads being unused for various reasons:
a) missing board support (DeepSx: SUSWARN#)
b) unneeded feature ID pins
- currently no known device models without keyboard backlight
- currently no known device models without TPM
c) BOARD_ID (L140CU/L140ZU) is fixed and known at build time
d) DDR_TYPE_*: there is only one known ram model
e) strap-only pads
f) unconnected pads
Configure them as NC with appropriate pull-up if no external pull exists.
The latter was checked by schematics and looking at the board.
When any of the unused ID pins is needed in the future, they can be
reactivated easily (configure as GPI).
Further, convert from use of legacy macro PAD_CFG_NC to PAD_NC.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ia370c180d5ae6f48360be14af3cbab29e6814e75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43644
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To support CSE Lite firmware update, CSE RW partition is extracted from
CSE blob binary and added to FW_MAIN_A and FW_MAIN_B.
CSE RW size for TGL is close to 2.3MB; hence, the size of FW_MAIN_A and
FW_MAIN_B is increased to avoid an overflow.
BUG=b:140448618
TEST=build with me_rw binary blob for volteer and boot to kernel.
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Ie3c2b657f0426d206dfe3729829ec34ff57812c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43790
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
L140CU has a TPM2 connected via SPI. Add the TPM device to the
devicetree and enable it.
According to Intel doc#615170-001, PIRQ is required for SPI TPM to work.
Since the TPM is connected to GPP_A7, enable NF1 (PIRQA#) and set it as
TPM interrupt in Kconfig.
Note: The PCH maps either LPC TPM or SPI TPM to the same address and
handles either LPC or SPI communication transparently. Thus we can use
MAINBOARD_HAS_LPC_TPM here, which implements TPM via that address.
Tested, but only polling works currently, because there is some upstream
issue with the tpm_tis module in current Linux kernels. [1]
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1770021
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I26d3b396fe1e99368e18fd3a6a9f02e3585b9f6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43641
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
burnet/esche
Add LPDDR4x DRAM index#0 Samsung K4UBE3D4AA-MGCR 4GB
BUG=b:165956924
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I644b65d77b79891ed65215d810b970fe43b29e3f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44821
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify USI_RESET_L GPIO_140 in touchscreen power on/off sequence
to be active low.
BUG=b:160126287
BRANCH=Zork
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I53dd872fdacb95cda43f297d2c3f9c6723b27bad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44858
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SATA is currently turned on in the Dalboz and Trembyle base board
variant devicetrees, even though no Google/Zork device uses SATA; for
mass storage they either use eMMC or NVME PCIe SSDs. This patch disables
both the SATA PCIe device and the bus where it was the only enabled
device on. The next patch in this patch train sets a new FSP-M UPD
setting
BUG=b:162302027
Change-Id: Ie7773d9dcb0518c3e01bdd0af23b62268ab64694
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44068
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on OCP Delta Lake, with FSP WW34 DCI can be connected if enabled.
Change-Id: I8e0dff921cef02dfc66467a2b8fa3e196fb36ac2
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These parts have not been used in any woomax devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=woomax
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611555
TEST=none
Change-Id: I651539c2df8e6d817582573d45b9e77156ece7d4
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
These parts have not been used in any berknip devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=berknip
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611704
TEST=none
Change-Id: I9020fc9cbbb4a97664b0c969dd841c5696a4d60f
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44871
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These parts have not been used in any dirinboz devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=dirinboz
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611271
TEST=none
Change-Id: I605550d44ba57d979df1bd5bef114f8ecc94fa3a
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44846
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch all zork boards to use generated generic SPDs from spd_tools.
HMAA1GS6CMR6N-VK is unused by Ezkinil, and all other boards, so it was
removed.
picasso/Makefile.inc was updated to populate the 2nd APCB channel based
on APCB_POPULATE_2ND_CHANNEL. This removes the need to suffix spd
entires with _x1/_x2.
Command to generate files:
$ find src/mainboard/google/zork/variants/ -maxdepth 1 -type d | grep -v '/$' | while read b; do
n=$(basename ${b});
if [ "${n}" = "baseboard" ]; then
continue
fi
go run util/spd_tools/ddr4/gen_part_id.go src/mainboard/google/zork/spd \
src/mainboard/google/zork/variants/${n}/spd \
src/mainboard/google/zork/variants/${n}/spd/mem_parts_used.txt
done
BUG=b:162939176
TEST=Boot ezkinil and dalboz check dmidecod -t17
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I0553858f83d3d1e90cf35bece108768f004a29a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44480
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add mem_list_variant.txt, a list of memory parts used by elemi SKUs.
Add dram_id.generated.txt, a list of dram id's to use for each memory part.
Add Makefile.inc, to specify DDR4 and build the SPD file list.
BUG=b:165461530
TEST=none
Change-Id: I6dbcccf577161cc0c787775e2ac03e0c7039baef
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44650
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add memory parts needed by zork boards. Attributes are derived from data
sheets.
BUG=b:162939176
TEST=Compared generated SPDs with data sheets and checked in SPDs
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I67f205f9af24bbc5c12656be1f363a15fe975955
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44447
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I noticed that re-running the lpddr4x SPD parts id tool that generates
the variants/VARIANT_NAME/memory/Makefile.inc changed the SPD that is
used for the H9HCNNNCPMMLXR-NEE part.
$ go run ./util/spd_tools/lp4x/gen_part_id.go \
src/soc/intel/tigerlake/spd src/mainboard/google/volteer/variants/delbin/memory
src/mainboard/google/volteer/variants/delbin/memory/mem_list_variant.txt
Based on the currently checked in generic SPDs for LPDDR4x, this
operation changes the Makefile.inc to use lp4x-spd-3.hex for the
H9HCNNNCPMMLXR-NEE part instead of lp4x-spd-2.hex.
This change updates that discrepancy in Delbin's memory Makefile.inc.
BUG=none
TEST=none
Change-Id: I9a19ab7b1bcdc3814fdd9c462ca2f590c8ed2935
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44785
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change lp4x spd names to include lp4x memory type (eg. lp4x-spd-1.hex).
BUG=b:160157545
TEST=run gen_part_id for volteer variants and verify that it changed
spd names to prepend the "lp4x-" to the filename..
Change-Id: I0c59da7eb78f34640aad2e852ca725d3e8571a8e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44784
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that generic SPD files have the memory type prepended to the
filename, they can be stored in the same location. This CL moves
the generic SPDs to the new location.
Change the ddr4 gen_part_id.go and gen_spd.go tools to use
"ddr4_spd_manifest.generated" instead of "spd_manifest.generated".
Change the lpddr4x gen_part_id.go and gen_spd.go tools to use
"lp4x_spd_manifest.generated" instead of "spd_manifest.generated".
Move TGL DDR4 and LPDDR4x generic SPDs into a common location.
Move JSL DDR4 and LPDDR4x generic SPDs into a common location.
Change the volteer/spd/Makefile.inc to use the new path for the spds.
Change the dedede/spd/Makefile.inc to use the new path for the spds.
BUG=b:165854055
TEST="emerge-volteer coreboot" and verify all variants build correctly.
Change-Id: I83b088cb718d15ffd3012c84a12b5231ae84a3e4
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44648
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable IPU for Volteer and Volteer2 variants for MIPI camera.
BUG=165340186
BRANCH=None
TEST=IPU is enabled and shows in lspci.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I66d60474e16c7a9aa8006d42b22510c1495dbd84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44628
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set psyspl2 to 97% of adapter rating, based on our experiment results.
BUG=b:160676773
TEST=Built and check firmware log.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I4b621a8cc1749ee52a9f16a7ad2ae7a7aa0f7a5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
|
|
DRIVERS_WIFI_GENERIC is a dependency for these SAR settings.
However, coreboot.org builders are not failing, but chromium
builders are only for serial configurations. It's not clear as
to why. Either way correct this.
BUG=b:159304570
Change-Id: I978b622a3a5a2490b0e3aaa14c24807d5afdff9a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44825
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most of the code is generated using autoport.
Working:
* booting Arch Linux from SeaBIOS
* PCIe/SATA/USB ports (see overridetree and early_init for lists)
* LVDS, DisplayPort, VGA, 3.5 mm jacks, RJ-45
* keyboard, touchpad
* C-States, S3 suspend
Not working:
* rfkill hotkey
* color of the mute hotkey
* sleep f-key
Untested:
* internal speakers and microphone (defective on my machine)
* FireWire
* docking station
* TPM (SeaBIOS detects it, no further test done)
Signed-off-by: Pablo Stebler <pablo@stebler.xyz>
Change-Id: I916583fad375f16e5b02388cbcad2e8a993e042f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Based on schematic and gpio table of lindar, generate gpio and
overridetree.cb settings for lindar.
BUG=b:161089195
TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage
Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com>
Change-Id: Ib869eef08433dab367edd46b3dc577190b6673d8
Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
|
|
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Change-Id: I2cc38115c27cbbe157fc850bbd88b10ae8001f52
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Returning a const uint32_t doesn't do anything, and it conflicts with the
declaration of sku_id() in include/boardid.h.
Change-Id: I2719e5782c9977f8ca4ce8f1dd781f092aa73d64
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1428708
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44746
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TS:
ELAN 5015M
G2 GTCH7503 HID TS
TP:
ELAN i2c-hid touchpad
BUG=b:161579679
BRANCH=master
TEST=1. emerge-zork coreboot chromeos-bootimage
2. power on proto board successfully
3. TP/TS are functional
Change-Id: I54aa16d433b6d71a39cca2ddd026a33e4741320f
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Follow HW schematic to correct DDSP_HPD1/2/3 and USB_OC3 pin.
BUG=b:165175296
BRANCH=none
TEST=Check all USB ports USB2 and USB3 both functional
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I2f941141d761b1b69bc8f9ef0b0c4516062fec4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Includes changes related to GPIO pad to configure I2C4 required for UFC
Change-Id: Ica3ac31f10214b8aff3bb64a2c3b42ccfa28bdcd
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
This change updates devicetree to enable I2C4 bus required for the UFC
Change-Id: Iade1b64fa3dc890a896fb987fdc8d68db7db5e5f
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
This reverts commit 81066b7ce7192432389578fc0f15b3a46da84bad.
Reason for revert: The hang observed when not exposing the reset GPIOs was root caused to zork sharing the same I2C bus between touchscreen and touchpad and interleaving of messages during probe which resulted in incorrect information returned back by touchscreen firmware. Exposing the reset GPIO changed the timing of probe and hence helped workaround the hang issue. The touchscreen driver is now fixed to perform I2C transactions in a single transfer and so the hang is no longer observed when reset GPIO isn't exposed.
BUG=b:162596241
BRANCH=zork
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ica11c33d542dd2324bb0b8905c5de06047cee301
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This will ensure that the cold reset is performed when CSE Lite jumps
from RO to RW.
BUG=b:162977697
TEST=Verify CSE reset is cold (sits in S5 for PCH Min Slp Duration time)
Change-Id: Ib1173e219ba46ee3275824220c8cf790b1d497fa
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
We hit a similar issue on Cereme, so I checked the trembyle base board
which also uses AUX4/HDP4 for the last DDI port, so using AUX3/HDP3 is
wrong there.
Change-Id: I99f9426969488cc5c5a14bd432b38bfd69ae7ef0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
BUG=b:155002684
TEST=emerge-dedede coreboot chromeos-bootimage
Change-Id: I89a4a5bbcd26b156a9660f80090bb5c953196b84
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add PMC.MUX.CONx devices to devicetree for terrador.
BUG=b:164941862
TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I3f5ea4c0fbcc0117934a1ec1c350e867d881eb9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add PMC.MUX.CONx devices to devicetree for todor.
BUG=b:164941862
TEST=FW_NAME=todor emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Iaef603553597685b03e805603352f38d70d65a5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
