summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2021-07-08mb/intel/tglrvp: Update Power Limit2 minimum valueSumeet Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=None BRANCH=None TEST=Build and test on tglrvp system Change-Id: I6bbbfa8e43a241df721b91425294983c1d561f2c Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-07mb/google/dedede/var/boten: Modify Wifi-SAR sku conditionstanley.wu
Due to new sku id apply for AMP ALC1015Q-VB. Modify correct WIFI-SAR detect condition for boten/botenflex sku. BUG=b:186174768 TEST=build and test on boten/botenflex Change-Id: I0a4fb08e558fee26534564aa5e37cac814c5a98a Signed-off-by: stanley.wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-07mb/google/dedede/var/storo: Update DPTF parametersTao Xia
Update DPTF parameters from internal thermal team. BUG=b:180875582 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I6d87bc63a66ff38bc2f706d58b8537c052bf4594 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-07mb/google/dedede/var/sasukette: Configure I2C times for touchpadTao Xia
Configure I2C high / low time in the device tree to ensure I2C CLK runs accurately between 380 kHz and 400 kHz. Measured I2C frequency just as below after tuning: touchpad:390.4 kHz BUG=b:192601250 BRANCH=dedede TEST=Build and check after tuning I2C clock is between 380 kHz and 400 kHz Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Ibe1603a48a3e841b6a50aa0c703697ec615b2854 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-07mb/siemens/mc_ehl: Switch to 16 MB ROM and provide a flashmapWerner Zeh
There is a 16 MB flash chip on mc_ehl. Set the ROM size accordingly and provide a flashmap for partitioning. Select the used flashmap on variant level to allow different layouts for different variants. Change-Id: I694729ad98f91e27308220903c49e7cb7fc436b4 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-07-07mb/siemens/mc_ehl: Clean up KconfigWerner Zeh
Remove Kconfig switches that are not needed for mc_ehl based mainboards. Change-Id: If231f37f06c6763d52a821799e87fdb3010af0aa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-07-07mb/google/zork/var/shuboz: adjust telemetry settingsKane Chen
According to stardust test tracking report to adjust telemetry setting. VDD Slope : 30595 -> 30400 VDD Offset: 77 -> 317 SOC Slope : 24063 -> 23789 SOC Offset: 105 -> 94 BUG=b:190338440 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Id997f9cd220d704c5b0882c257a596fb3d2485ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/56077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2021-07-05mb/siemens/mc_ehl: Provide a proper scheme for variantsWerner Zeh
There will be more variants of this mainboard so prepare the scheme for Kconfig to handle the variants properly. Change-Id: If1cf418836d77a45955ee55d30ba670db8ff2533 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-07-05mb/siemens/mc_ehl: Add new mainboard based on elkhartlake_crbWerner Zeh
Add a new mainboard called mc_ehl which is based on Intel's 'elkhartlake_crb'. This commit simply copies the mainboard directory and adjusts the naming to match the new board's name. Follow-up commits will introduce the needed changes for the new mainboard. Change-Id: Ia7c0616098046d975aa698910ac81f435d7882cb Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-07-05mb/intel/adlrvp_m: Remove ASL code and enable dynamic SSDT creation for ↵Varshit B Pandya
camera ACPI This change updates device tree to enable SSDT generation for world facing camera and user facing camera for ADLRVP. Also reverts DSDT changes related to both camera. TEST=Build and Boot aldrvp check i2c enumeration and output of media-ctl Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I39f82dc9eb91496d80479ae3f59ca5e03402a599 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-07-05mb/intel/adlrvp: Remove ASL code and enable dynamic SSDT creation for camera ↵Varshit B Pandya
ACPI This change updates device tree to enable SSDT generation for world facing camera and user facing camera for ADLRVP. Also reverts DSDT changes related to both camera. TEST=Build and Boot aldrvp check i2c enumeration and output of media-ctl Compared SSDT with this patch against DSDT without this patch, they are same Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I08834bbcf80dc46737de07f69a2402ed6bf93d4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-07-05mb/google/dedede: Fix the pointer/address used in memcpyKarthikeyan Ramasubramanian
The caller is already passing the address to the required LTE reset and enable GPIO. During memcpy, the address to that pointer is used which will lead to copying undefined data. Fix the pointer/address used in memcpy. BUG=None BRANCH=dedede TEST=Build Kracko, Drawcia and Metaknight mainboards which use this function. Change-Id: I79d6d9af03acd59ab5e1cd7df97bf451011dfeaa Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Found-by: Coverity CID 1458053, 1458054. Reviewed-on: https://review.coreboot.org/c/coreboot/+/56046 Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-05mb/intel/adlrvp: Update the FIVR configurationsV Sowmya
This patch sets the optimized FIVR configuration for adlrvp cutomized based on the pnp measurements to achieve the better power savings in sleep states. * Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3, S4, S5 states. * Update the supported voltage states. * Set the ICC max to 500mA for v1p05 and vnn. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I83e6910502d5cf9d4c26fa581272f59ac483ae19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-07-05mb/google/brya/brya0: Enable CrashlogTim Wawrzynczak
brya0 is a reference and development platform, therefore it would be helpful to have Crashlog enabled. Change-Id: I936e73e808e0a05e8b7822cddbb5ee3fa7dee13e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-07-05mb/google/brya: Add HANG_DETECT host event to EC S0ix wake maskTim Wawrzynczak
The brya EC supports S0ix hang detection, but it was not enabled in coreboot as well, masking that event out of S0ix, therefore add it in to the EC S0ix wake mask. TEST=After EC prints "Warning: Detected sleep hang! Waking host up!", the host actually wakes up Change-Id: I2c699114abcd9a045a41858c731e4b6fe99d3000 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-05mb/google/dedede/var/cret: Disable SDCard controllerDtrain Hsu
Cret doesn't support SDCard. Disable SDCard contorller for Cret. BUG=b:191232222 TEST=Build and boot to check lspci Cq-Depend: chromium:2993724 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I889f0545883aa75813dd91dc3e6a4dcfc246687f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-04supermicro/x11: enable COMB via LPCAlexander Couzens
Allow to use the 2nd COM port of the AST2400 which can be also used via IPMI/serial-over-lan. Change-Id: I6f9c85b1f5428d3c3acf7a2f20296134c4611b1e Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-02mb/google/dedede/var/magolor: Enable G2 touchscreen for magmaTyler Wang
Add G2 touchscreen support for magma. BUG=b:189852808 TEST=Build and verify that touchscreen works. Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I3e032bff7f3e97f54f3e544035e862058ea0dbfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/55976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2021-07-02mb/google/volteer/variants/eldrid: Include SPD for MT40A512M16TB-062E:RMark Hsieh
Add SPD support to eldrid for DDR4 memory part MT40A512M16TB-062E:R. Eldrid should use DRAM_ID strap ID 0 (0000) on SKUs populated with MT40A512M16TB-062E:R DDR4 memory parts. BUG=b:192380070 TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds successfully. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I4d07727c9c41bf494fbef373abce0ac1fc65c316 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55983 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-01mb/google/hatch/scout: update gpios and device treeJeff Chase
Scout-specific changes to puff reference following bring-up - copy baseline changes from genesis - update GPIOs - update PCIe ports for TPUs - remove LSPCON - enable eMMC - disable touch I2C - enable uart BUG=b:187078663 TEST=boot scout BRANCH=none Signed-off-by: Jeff Chase <jnchase@google.com> Change-Id: Ic3cb9cf515ab7a4a0ebbee249644dd3f133d8735 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-01mb/google/brya: Swap P-sensor IRQEric Lai
P-sensor is swap by the latest schematic. Thus, swap the IRQ for correct P-sensor. BUG=b:192331122,b:181555900 TEST=check P-sensor driver can be probed without error. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3ccb31c1925e476e2ebb34b2439a491759472405 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-01QEMU: Only call `pci_assign_irqs` with non-NULL devAngel Pons
Do not call `pci_assign_irqs` with a NULL device pointer. Change-Id: Ide9ae38dedd881ed673ba1838a1e29529b306937 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-07-01mb/emulation/qemu-i440fx: Tidy up PAM register writesAngel Pons
Tidy up the code that programs the PAM (Programmable Attribute Map) registers. Introduce the `D0F0_PAM` macro and use it to replace the magic `0x59` and `0x5a` values in the code. Adjust the range of the for-loop to work with the `D0F0_PAM` macro, and properly indent the loop's body. Change-Id: I9036425d726ffb69737ea6ed36c7a8f61d9d040a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-07-01mb/asus/p8x7x-series: Add P8C WS as a variant of P8X7X seriesBill XIE
Mainboard information can be found in the included documentation. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Idb696193e5a67c42adf45e54d455d2dff7681ca7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-01mb/prodrive/hermes: Implement smbios_mainboard_versionPatrick Rudolph
Return the HSI version read from BMC in smbios_mainboard_version. Change-Id: If907d598c9e05d35f8898d294678f61d075f935a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-01mb/google/dedede: Create cappy2 variantSunway
Create the cappy2 variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:192035460 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_CAPPY2 Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: I772801152b9ca9c2c6afe76a353cb2b62d6210ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/55886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-01mb/google/brya/variants/primus: Update mainboard properties for BB retimer ↵Casper Chang
upgrade This changes updates mainboard properties by adding DFP number and power_gpio for each DFP. Reference CB:55348 BUG=b:191897776 Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I63c912980530e5c9f341bdbab18c07685fd77abf Reviewed-on: https://review.coreboot.org/c/coreboot/+/55888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-07-01mb/google/dedede/var/drawcia: Add LTE modem support for drawperKevin Chiu
Add LTE modem to devicetree. Configure GPIO control for LTE modem by fw_config. Update LTE USB port configuration at run-time after probing FW_CONFIG. By default the concerned USB port takes the Type-A port configuration. BUG=b:186393848 TEST=Build image and check with command modem status Change-Id: I20450ae37e5047dba67211316515994bd2a09600 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-01mb/google/dedede/var/kracko: Update LTE USB port configurationTony Huang
Update LTE USB port configuration at run-time after probing FW_CONFIG. By default the concerned USB port takes the Type-A port configuration. BUG=b:178092096 BRANCH=dedede TEST=Build and boot to OS to check LTE by modem status Change-Id: If12cc29ddda6d5c32c0bda840a3680e7bf932f89 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54671 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-01mb/emulation/qemu-i440fx/fw_cfg.c: Use `smbios_header`Angel Pons
Replace uses of `smbios_type0` with `smbios_header` for correctness. Change-Id: I2479984f5322f0fb474ff1707c1dd1f5885f30e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-01SMBIOS: Introduce `smbios_full_table_len` functionAngel Pons
Introduce the `smbios_full_table_len` function to consolidate table length calculation. The case where the length of a table equals the length of the structure happens when a table has no strings. Change-Id: Ibc60075e82eb66b5d0b7132b16da000b153413f9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-07-01SMBIOS: Introduce `smbios_carve_table` functionAngel Pons
Factor out some boilerplate code into a helper `smbios_carve_table` function, which zeroes out the table memory and fills in the header fields common to all tables. Change-Id: Iece2f64f9151d3c79813f6264dfb3a92d98c2035 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-07-01mb/pcengines/apuX: Refactor to avoid dead assignmentAngel Pons
The initial value of `len` is never used. Declare and initialise all local variables in a single statement to avoid this problem. Change-Id: Ieb96758f4cd19d9d3f8fdc543e8ca17db06a2123 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-01SMBIOS: Avoid `sizeof` on struct typeAngel Pons
Where applicable, use the size of the associated variable. Change-Id: Ibbac2a82893232a6f87182a6a965b84a599d633e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-06-30mb/google/brya/variants/gimble: init overridetree for gimbleMark Hsieh
init overridetree.cb based on the schematic carbine_adl-p_proto_20210618_proto final.pdf BUG=b:191213263 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I3f6875ef438b147436605629445d346a56896a87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-30mb/google/brya/variants/primus: update gpiosCasper Chang
set GPP_C3 and GPP_C4 as NC since LAN function removal. BUG=b:190643562 Change-Id: I21214d0a2904ba4347fbbbc74237aca6db22c345 Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55933 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-30soc/intel/elkhartlake: Enable PCH GBELean Sheng Tan
Enable PCH GBE with following changes: 1. Configure PCH GBE related FSP UPD flags 2. Use EHL own GBE ACPI instead of common code version due to different B:D.F from the usual GBE 3. Add kconfig PMC_EPOC to use the PMC XTAL read function Due to EHL GBE comes with time sensitive networking (TSN) capability integrated, EHL FSP is using 'PchTsn' instead of the usual 'PchLan' naming convention across the board. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I6b0108e892064e804693a34e360034ae7dbee68f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-30ec/google: Use EC_HOST_EVENT_NONERob Barnes
google_chromeec_get_event returns 0 for no event. Return EC_HOST_EVENT_NONE=0 to improve readability. BUG=b:184074997 TEST=Build and boot guybrush without error Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: Ic08ed9ccdd7c0023d0fe8b641fcf60dca495a242 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-30mb/google/dedede/var/storo: Add USB2 PHY parameters for LTE USB2.0Tao Xia
This change adds fine-tuned USB2 PHY parameters for storo. BUG=191089827 TEST=Built and verified USB2 eye diagram test result Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I38dd8ad59b32f635e641765e0a1bd13651180d23 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-30mb/google/dedede/var/storo: Enable Wifi SAR for storoTao Xia
BUG=b:190027970,b:178175837 BRANCH=dedede TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I7084f9b7be2b66adda2d9d5a83ce5dd9c31d01b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-30mb/google/brya: Set GPP_B3 to APIC modeEric Lai
Set GPP_B3 to APIC mode to avoid PCI IRQ conflict. BUG=b:181555900 TEST=check dmesg there are no IRQ request errors like below. genirq: Flags mismatch irq 27. 00002008 (sx932x_event) vs. 00000080 (idma64.1) Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Idf88fae9e244858445c45e66e26715cebe0c93ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/55777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-29mb/google/guybrush: Initialize WWAN for USB if requestedMartin Roth
To set the Fibocom 850-GL module to USB mode, it needs to be disabled when PCIe training happens, or it will automatically switch to PCIe mode. This patch makes sure it's shut down when training happens in FSP-M. It will be brought up in ramstage and will be available for USB enumeration later. BUG=b:187316460 TEST=Run lsusb from the OS and see that the Fibocom module is present on USB. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I153eb6cd7c3a0e2cc3b71c99f76db3e565173cfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/54743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-29mb/google/guybrush: Update romstage power-on timings for PCIeMartin Roth
This configures the romstage portion of the PCIe GPIOs in the correct sequence to meet the power-on timings. The PCIe_RST line is anded with the Aux reset lines, so to take the PCIe devices out of reset, both need to be brought hign. BUG=b:184796302, b:184598323 TEST=Verify timings between GPIO init sections. All available modules are present after training. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ib1990bba31c84827467d4ff8a15f1e0682501e70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54741 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29mb/google/guybrush: Update bootblock power-on timings for PCIeMartin Roth
This configures the bootblock portion of the PCIe GPIOs in the correct sequence to meet the power-on timings. Setting the PCIE Reset happens in coreboot instead of in the FSP. The Aux reset lines are anded with the PCIe RST line, so both have to be brought up together. On v1 of guybrush, the PCIe reset line also resets EC communication, so it must be brought up immediately on that version. BUG=b:184796302, b:184598323 TEST=Verify timings between GPIO init sections. All available modules are present after training. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I2d0b812b654b0cd317a2c8c1ce554e850c96be44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-29Kconfig: Escape variablesPatrick Georgi
New kconfig parsers interpret $(var) themselves, leading to empty fields. Old kconfig understands \$(var), so use that. Change-Id: I927fc9dc7a66211bfe51d4324cf7c51b555ea3a8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55912 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29mb/google/herobrine: Add Senor and Piglin variantsShelley Chen
Add configs for Herobrine variants. Also enable ec sw sync as this should not be disabled by default. BUG=b:182963902 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_SENOR -x -a -B ./util/abuild/abuild -p none -t GOOGLE_PIGLIN -x -a -B Change-Id: Ide4e375aa0236dce65a954a2f68455d05fa841eb Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-06-29mb/google/guybrush: provide full range backlight settings to kernelPratik Vishwakarma
Utilize the SOC_AMD_COMMON_BLOCK_GRAPHICS_ATIF option to provide full range backlight settings to the kernel. BUG=b:190443612 Change-Id: If071b701c383e3a6b78bf45a562f5a9b31397835 Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-29mb/google/brya0: Enable MIPI UFCVarshit B Pandya
1. Add 2 port 2 endpoint 2. Add support for OVTI5675 3. Guard entries in override device tree by FW_CONFIG MIPI UFC is on I2C2 This configuration is as per P2 schematics BUG=b:190674542 TEST=Build and Boot on Brya Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: Id3ef974994fd0d447e398b365cdf01d78c94cc4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/55670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-28mb/google/guybrush: Configure eSPI requirements before setting it upMartin Roth
When initializing eSPI early, guybrush has requirements to configure the bus properly. Those are normally run in bootblock_mainboard_early_init, but when setting up eSPI early, those have not run yet. BUG=192100564 TEST=Build along with previous patch, eSPI works on guybrush Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ifec6113d48aea0bb5efe47909e4faf0161148a99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55864 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-28mb/google/volteer/var/volet: add G2 touch supportSheng-Liang Pan
Enable G2 touchscreen support for Volet. BUG=b:185097280 TEST=emerge-volteer coreboot chromeos-bootimage Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I907356448b5d5cbf3974717654ea09cd995962f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55835 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-28mb/google/dedede/var/blipper: Update devicetree and gpio settingZanxi Chen
To reduce power load, set unused GPIOs to NC and close unused interface in devicetree. GPIOs and interfaces are as below: GPIO: GPP_C18/C19/D12/D14/D15/D19/D20/D21/E00/E02/H06/H07 Interface: I2C1/I2C3/I2C5 USB: port2_3/2_4/2_6 BUG=b:185044041 BRANCH=dedede TEST=Built bios and test, it reduces power load without affecting device function. Change-Id: Ib5999f0e129bf3e660fe293eda7af3e8e1426151 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ben Kao <ben.kao@intel.com>
2021-06-28mb/google/brya0: Add FW_CONFIG for UFCVarshit B Pandya
UFC on brya can be USB or MIPI Add FW_CONFIG bit for this option Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I2f1492d7c769aba8da80763124dda474b32cfbfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/55780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-28mb/google/brya: Update mainboard properties for BB retimer upgradeMaulik V Vaghela
This changes updates mainboard properties by adding DFP number and power_gpio for each DFP. Reference CB:54292 BUG=b:186521258 TEST=Updated BB retimer FW from 3.4 to 3.5 without any device connected. Change-Id: I24a02fd446cb66bda9e66e59802b4deea6894273 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-28mb/google/dedede/var/sasukette: Update DPTF parametersTao Xia
Update DPTF parameters from internal thermal team. BUG=b:180875580 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I4dbe3947779395903d7999627948d3e97d6cc985 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-28mb/google/dedede/var/cret: Add ssfc codec cs42l42 supportDtrain Hsu
Add cs42l42 codec support in cret. BUG=b:188623237, b:189073353 TEST=Build and boot to check functional with cs42l42 EV board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I2c53291e07fd785c1360c05171eed634788bc665 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55091 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-28mb/intel/adlrvp_m: Enable TCSS USB ports device pathBernardo Perez Priego
This provide a more consistent mechanism to enable corresponding USB TCSS port. BUG=b:182960979 TEST=Boot device, Type C port should operate correctly. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Iadc0df2e6e19a5afacbb7db1ae0bc7546dbcdc1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/55772 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-28mb/google/dedede/var/pirika: Update DPTF parametersAlex1 Kao
Update DPTF parameters from internal thermal team. BUG=b:190518303 BRANCH=None TEST=emerge-dedede coreboot Change-Id: I4005047e0c5f39a12c161a92fbd0afaaec1dc976 Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com>
2021-06-28mb/google/dedede/var/pirika: Support audio AMP auto modeAlex1 Kao
Support audio AMP selection with fw_config. BUG=b:188446060 BRANCH=None. TEST=built pass Change-Id: Idf0eb2a87bfa9665e61d185e37adb90987f3cefb Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com>
2021-06-28mb/google/dedede/var/blipper: Enable ELAN touchscreenZanxi Chen
Modify driver from hid to generic(ELAN0001 that used generic driver without hid). BUG=b:191620724 BRANCH=dedede TEST=build bios and boot, touchscreen will work properly. Change-Id: Ife77d514d9906049f237edd169bc07bb53c48579 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
2021-06-26mb/google/brya/variants/primus: init overridetree for PrimusCasper Chang
init overridetree.cb based on the schematic ver MB_20210616C. BUG=b:191897776, b:191897775 Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I185b36e34d24b703092e3798e91c70ce3912b11f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-25mb/facebook/fbg1701/fbg1701/vboot-rw.fmd: Correct FMD statementFrans Hendriks
CB:55452 uses FMAP instead of "cbfs master header". The flash size statement in vboot-rw.fmd does not contain the start address, resulting in a non-booting system. Add start address to FLASH statement. BUG = N/A TEST = Boot Facebook FBG1701 Change-Id: Id05ad33babb416a37c657b25cdb1e98d47c1a56d Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-25mb/google/{octopus,reef}: Fix size of SI_BIOS region in default.fmdMatt DeVillier
0xf7f000 - 0x1000 = 0xf7e000, not 0xf6f000. This fixes build failure when selecting the option to validate the layout using the flash descriptor (CONFIG_VALIDATE_INTEL_DESCRIPTOR) Test: build google/casta successfully with IFD validation selected Change-Id: I6df67f76f5d766a9f4f85ffc3e1f0de4a241f509 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55815 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-25security/intel/cbnt: Remove fixed size requirementArthur Heymans
The CBnT provisioning tooling in intel-sec-tools are now cbfs aware and don't need to have a fixed size at buildtime. Tested on OCP/Deltalake with CBnT enabled. Change-Id: I446b5045fe65f51c5fa011895cd56dbd25b6ccc7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55821 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christopher Meis <christopher.meis@9elements.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-25mb/google/brya/variants/primus: add dram part idMalik_Hsu
This change adds mem_parts_uesd.txt that contains the only memory parts used by primus for Proto build and Makefile.inc generated by gen_part_id.go using mem_parts_used.txt. BUG=b:186091208,b:189169995 Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I423fd9ad4349c51c6e6b166734ae706509d6ac3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/55748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-06-25mb/google/volteer/var/chronicler: add chronicler memory configuration and ↵Sheng-Liang Pan
gpio and devicetree settings add memory configuration for chronicler, based on schematic and gpio table, update gpio and devicetree settings for chronicler. BUG=b:187318819 BRANCH=None TEST=FW_NAME=chronicler emerge-volteer coreboot chromeos-bootimage verify bootable with chronicler Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Id5524b97a236dcc64d18ab1cd2ce13f6bb2d998f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55340 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-25mb/facebook/fbg1701/fbg1701/Kconfig: Update VBOOT key locationFrans Hendriks
Error Could not add [key.vbpubk]: too big occurs, when Eltan verified boot is enabled. Update value of VENDORCODE_ELTAN_VBOOT_KEY_LOCATION. BUG = N/A TEST = Boot Facebook FBG1701 with Eltan verified boot enabled. Change-Id: I1faecd189915985df633ac74627fd872ce8867f0 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-25mb/google/octopus: add audio codec into SSFC support for Garg/GarfourKevin Chiu
BUG=b:191213716 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I2d5738442d2c173fd5b4802d8b5dff76b428c6f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55564 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-25mb/google/guybrush: Change ACPI HID for machine driverYu-Hsuan Hsu
To avoid from using same the name AMDI5682 as Zork, changing to use AMDI1019. The corresponding kernel change is on CL:2929864 BUG=b:189297564 TEST=Audio works with the corresponding kernel change. Cq-Depend: chromium:2929864 Signed-off-by: Yu-Hsuan Hsu <yuhsuan@google.com> Change-Id: Ie89302f3b6cd3edb8253b909fde4722c2ea1e102 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55508 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-25mb/asus/p5q_se: Add initial supportAlice Sell
This motherboard is almost identical to the ASUS P5QL PRO, with the only noticeable difference being that the ASUS P5Q SE has a P45 MCH while the P5QL PRO has a P43 MCH. Few changes were required. Signed-off-by: Hunter Sell <alicelyralain@gmail.com> Change-Id: I36612bac16a79f05f3fe57e535e4ba3c73790a86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-25mb/google/brya: add generic LPDDR4 SPDs for GimbleMark Hsieh
Add Makefile.inc to include three generic LPDDR4 SPDs for the following parts for Gimble: DRAM Part Name DRAM ID to assign MT53E512M32D2NP-046 WT:E 0 (0000) H9HCNNNCPMMLXR-NEE 1 (0001) H9HCNNNBKMMLXR-NEE 0 (0000) BUG=b:191574298 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I60f95ac5ed7f3134882f6580335ec33632676796 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-06-25mb/google/brya/variants/gimble: set up gpioMark Hsieh
Set the GPIO configuration of gimble BUG=b:191213263 Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I667943578a2bf58cc5841564b8df5b6469d7594b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55717 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-24mb/google/trogdor: Add new vaviant mrblandZanxi Chen
New boards introduced to trogdor family. BUG=b:191800434 BRANCH=none TEST=make Change-Id: I93b74e79188bd0cc36c8b48e552230ae0d6f593a Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-06-24soc/intel/alderlake: Update mainboard_memory_init_params() argumentSubrata Banik
This patch updates mainboard_memory_init_params() function argument from FSPM_UPD to FSP_M_CONFIG. Ideally mainboard_memory_init_params() function don't need to override anything other than FSP_M_CONFIG UPDs hence passing config block alone rather passing entire FSP-M UPD structure. Change-Id: I238870478a1427918abf888d71ba9c9fa80d3427 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-24mb/google/guybrush: configure eSPI mux on psp_verstageKangheui Won
Temporarily set eSPI mux in verstage_mainboard_early_init. Ideally cezanne code should have common function to do this and mb-specific code would just call it, but for now PCI access doesn't work in the PSP so we can't do it. AMD team confirmed that the current PSP doesn't configure LPC so we don't have to disable LPC when configuring eSPI mux so we can temporarliy skip the LPC part here. BUG=b:183149183 TEST=boot guybrush with psp_verstage Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I8317409fa5efd1adffc184d75affbb4d305183f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-06-24mb/google/cherry: Implement regulator interfaceRex-BC Chen
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iab58edd019ccf9130e96fae55f147ab20cd0f45b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55751 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-24mb/google/cherry: Initialize DPM in romstageRyan Chuang
Add initialization of DPM drvier used by DRAM calibration test. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: I8bd10864267dfa4db8528d40483eccee2d05c1d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-24mb/google/cherry: Add mt6360 driver for PMIC accessRyan Chuang
Add initialization of mt6360 drvier used by DRAM calibration test. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: Id74835d8395afac9e7e2c987a0a033f1b524fbfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/55750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-23mb/google/guybrush: Indicate the presence of ACP DMICKarthikeyan Ramasubramanian
In order to enable ACP DMIC hardware runtime detection, indicate that ACP DMIC is present. BUG=b:182960979 TEST=Build and boot to OS in guybrush. Ensure that the _WOV ACPI method is populated in the ACP device. Change-Id: I9a53d158ed08a6b46c29bcb8fe3a2a0d108bd6cd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55030 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-23mb/google/guybrush: Add guybrush specific AMDFW config fileMartin Roth
This takes the "generic" AMD firmware config file from the cezanne directory and removes pieces unnecessary for guybrush. Removed: - PSPTRUSTLETS_FILE TypeId0x0C_FtpmDrv_CZN.csbin - PSP_MP2FW0_FILE TypeId0x25_Mp2Fw_CZN.sbin - PSP_KVM_ENGINE_DUMMY_FILE TypeId0x29_KvmEngineDummy.csbin - DRTMTA_FILE TypeId0x47_DrtmTA_CZN.sbin - PSP_MP2CFG_FILE MP2FWConfig.sbin BUG=b:187103438 TEST=Build & Boot Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I5a0ed1edd7616a890f906b7f3e4a7d364758ca47 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-23mb/google/dedede/var/magolor: Enable weida touchscreen for magisterDavid Wu
Add weida touchscreen support for magister. BUG=b:191633024 BRANCH=dedede TEST=Build and verify that touchscreen works on magister. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I3de6a84d2d58ef87f0ae13e8a117a980a0210ac4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Randy Lai <randy.lai@weida.corp-partner.google.com>
2021-06-23mb/google/dedede/var/sasukette: Change ELAN touchpad driverZhi Li
Use drivers/i2c/hid can't update firmware by kernel update script, so change to drivers/i2c/generic. BUG=b:188602529 BRANCH=dedede TEST=can update ELAN touchpad firmware(277.0_1.0) by kernel script Change-Id: I3592403fe5d0f8d0f67059f8296277e3c028c117 Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55248 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-23mb/{fb/fbg1701,portwell/m107}: Don't select HAVE_FSP_BINArthur Heymans
This selected by default if 3rdparty/fsp is used. There is no need to override this behavior in the mainboard Kconfig. Change-Id: I01ee2e90e0eceaa3100d911b5460cf99f413b185 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-06-23mb/facebook/fbg1701/Kconfig: Correct dependencyFrans Hendriks
Config items depends on USE_VENDORCODE_ELTAN but are VBOOT specific. Correct dependency of these items on VENDORCODE_ELTAN_VBOOT. BUG = NA TEST = Boot facebook FBG-1701 with possible combinations of Eltan security. Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Change-Id: Icd1c3e5c70ca562190308752f45aac734826649a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52132 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-23mb/intel/sm: Skip FSP to program UART0Subrata Banik
Set "SerialIoUartMode" for UART0 as PchSerialIoSkipInit Change-Id: Idc7da7bf38634c04b0f4acd4c7c2ea9fa88545e5 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55207 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-22mb/google/guybrush: Only enable early port80s if using psp_verstageMartin Roth
PSP_Verstage will enable eSPI early in the boot sequence. If the platform isn't using psp_verstage, the system can hang on the first port 80h postcode that comes out because they aren't routed to an active device until eSPI is configured. BUG=b:191370340 TEST=Build without PSP_Verstage, verify system doesn't hang. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I37fbb251cd79609b856c4480ca29ce94b08897d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55738 Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-22mb/intel/adlrvp: Update Mainboard part number and VendorMeera Ravindranath
dmidecode output should match with the CrOS kernel updated string. TEST=dmidecode grep "Manufacturer" = Intel Corporation dmidecode grep "Product name" = Alder Lake Client Platform Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I7cce423de624e7056e88b52a1443c554fd9123bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/51408 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-22mb/google/brya/variants/primus: set up gpioMalik_Hsu
Set the GPIO configuration of primus BUG=b:190643562 Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I405561ae8a44d95ffdc526241f9c52761f67ed35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-22mb/asus/p8h61-m_pro_cm6630: Add initial supportAlice Sell
This motherboard is somewhat similar to the p8h61-m_pro, but also different. It has two exposed RAM slots with a pinout for four, and it's an OEM variant used in PCs ASUS sold in stores. Signed-off-by: Hunter Sell <alicelyralain@gmail.com> Change-Id: Id08349feb0aeaf21406f814f6d19bbe0d9312a4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-22mb/lenovo/t440p: Disable second PEG deviceAngel Pons
PEG bifurcation is strapped to x8/x8 on this board, but only the first port is used. Disable the PEG device at 00:01.1 because it is unused. Should fix booting with commit ae999503f62ef8a3b9b2756a2810d29c383a009e (nb/intel/haswell/pcie.c: Add missing pre-ASPM init). The `config_of()` function call added in that commit makes coreboot die if any PEG device that is enabled by strapping is not present in the devicetree. While it is true that the PEG code should not use `config_of()`, this PEG device should still be disabled on this board as it is never used. Change-Id: I16809e081f9a56ba2f1fdfcb4b8289d75161056b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
2021-06-22mb/lenovo/t440p/devicetree.cb: Visually align devicesAngel Pons
Visually align devices and corresponding comments in the devicetree. Tested with BUILD_TIMELESS=1, Lenovo T440p remains identical. Change-Id: Id6f521275ffd0b35c247152dc9293c4182c4a96d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-06-22mb/lenovo/t440p: Drop redundancy in devtree commentsAngel Pons
Remove some redundant parts of devicetree comments. This used to happen when using autoport, but has been fixed at some point. Tested with BUILD_TIMELESS=1, Lenovo T440p remains identical. Change-Id: Ie24b5430c7771c9ce4dda6c9a10d70ee9000df7c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-06-22drivers/i2c: sx9310: fix overridetree.cbGwendal Grignou
An error in script did not set the attribute properly: - Entry CS0 is not used as sensor, but as ground, - Entry CS1 is used as the startup sensor. This fixes a regression caused by commit 689c25b9d6 (drivers/i2c: sx9310: Replace register map with descriptive names) EQ=b:173341604 BRANCH=volteer Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Change-Id: I92c01209031e9a917d95b1cb2537b0ce7b93e66d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51893 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21mb/google/dedede/var/storo: Update DPTF parametersTao Xia
Update DPTF parameters from internal thermal team. BUG=b:180875582 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Ica2f2856000c8dcbf4d23b7b4a3c479dc7d4862b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-06-21mb/google/guybrush: Add devfn macros for devices on GPP bridgeKarthikeyan Ramasubramanian
Add devfn macros for some peripheral devices that are attached to PCIE GPP Bridge. BUG=None TEST=Build and boot to OS in Guybrush. Change-Id: I7c5433dff2329f13c282908e2b848405819347ff Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-21mb/google/dedede/var/blipper: Configure Acoustic noise mitigation UPDsZanxi Chen
Enable Acoustic noise mitigation for blipper and set slew rate to 1/8 which is calibrated value for the board. BUG=b:187760191 BRANCH=dedede TEST=build firmware to UPD and Acoustic noise test Change-Id: I187702c23712416eaaaaf1e210dcfc6b2c560041 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-21mb/purism/librem_mini/hda_verb.c: Fix subsystem, jack detectMatt DeVillier
- set subsystem/subvendor ID to Realtek default, as the one dumped from the vendor UEFI firmware provides no advantages - Add a codec reset before setting the subvendor ID using the Azalia macro for consistency with all other Realtek HDA codecs - disable jack detect for the external mic on the 3.5mm jack, since it's not currently working, so that the external microphone can be manually selected Change-Id: Ib0f99e5088973a721c0a295899012c9aea5009cf Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21mb/purism/librem_14/hda_verb.c: Fix subsystem, verb count, jack detectMatt DeVillier
- set subsystem/subvendor ID to Realtek default, as the one dumped from the vendor UEFI firmware provides no advantages - fix the number of verb entries, which excluded the 4 following the pin configs - issue the reset *before* setting the subvendor, and use the Azalia macro - disable jack detect for the 3.5mm jack, both line out and mic, since it's not currently working, so that the outputs can be manually selected Change-Id: Icd961c3c5aec23cf61d6a9ad65c603c6dc04697a Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21mb/purism/librem_mini: Enable acoustic noise mitigationMatt DeVillier
Enable FastPkgCRampDisable for all domains, set SlowSlewRate to fast/16 for all domains. This aligns the settings with the Librem 14. Test: boot Librem Mini v2, observe high frequency acoustic noise reduced. Change-Id: I10bc2a3e6b631b8c0b430e204f376aa9a81ac683 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21mb/purism/librem_14: set SA slew rate to fast/16Matt DeVillier
Decrease SA slew rate to match other domains and reduce high-frequency noise slightly. Change-Id: I02cd93481f6bfba6249cb338a0e2f47d471a438e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21mb/guybrush: Probe FW_CONFIG for FP_PRESENTRob Barnes
Only enable fingerprint device when FP=FP_PRESENT in FW_CONFIG. BUG=b:186685292 TEST=Boot guybrush, no "EC failed to respond in time" error Change-Id: Ifaea9e23e6cdfdae024464ff36c1520b8ad05e50 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 07:05:54 +0000