summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-07-11mb/intel/coffeelake_rvp: Add cpu count for CFL S62Lean Sheng Tan
Increases CPU max core count to 16 for coffeelake Refresh-S Platform. TEST: boot to linux OS on CFL-S refresh Intel RVP and verified the output of cat /proc/cpuinfo shows no of processor=16. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I579ff6ae8227844741406c503d3994408ec2b617 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34156 Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch: Fix interrupt trigger type for GPP_H0(HP_INT_L)Furquan Shaikh
HP_INT_L(GPP_H0) is configured for GPIO IRQ instead of APIC IRQ since it needs to trigger on both edges. With GPIO IRQ, it is necessary to configure the trigger type in coreboot to match the ACPI configuration. This is because: 1. ACPI configuration is used by intel-pinctrl driver in Linux kernel to re-configure the trigger type for the pad in GPIO DW0 config register. This is done when kernel driver probes and requests irq for its device. 2. On resume from S3, the pad configuration gets reset and coreboot sets the trigger type to LEVEL. However, kernel driver does not probe again. This results in the trigger type being configured incorrectly. This change updates the GPIO configuration for GPP_H0 to set the same trigger type as advertised in ACPI for the kernel. BUG=b:132672011 TEST=Verified that S3 works fine. Verified that interrupt on GPP_H0 works fine on boot as well as after suspend/resume. Change-Id: Ieb44c7403a2f4911b4a8f422053dee8bcfb91d85 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34181 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-10mb/google/octopus: Remove LPDDR4 RAMID index 5,6 CH[1] only SKUKevin Chiu
From Intel EDS: Table 3-5. LPDDR4 Configurations CH00 CH01 CH10 CH11 "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "Unpopulated" "Unpopulated" CH[1](CH10/CH11) can't use alone without CH[0] BUG=b:135498646,b:136694293 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I03af74301aad3e688c97992b37c59b20a4fff58a Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34069 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-09arch/non-x86: Flip HAVE_MONOTONIC_TIMER defaultKyösti Mälkki
Also remove allwinner/a10 dummy monotonic_timer implementation. Change-Id: I9dfa9b92dc63375465e3bb87b73eeefad601c810 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-09emulation/qemu-power8: Select CPU_QEMU_POWER8Kyösti Mälkki
Change-Id: I5fa6486e96cd81767225a3e1015341c0c89053d1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-09arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-classKyösti Mälkki
Build of the entire smm-class is skipped if we have HAVE_SMI_HANDLER=n. Change-Id: I10b4300ddd18b1673c404b45fd9642488ab3186c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34125 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-08sb/intel/ibexpeak: Use common final SPI OPs setupArthur Heymans
This also removes the relevant RCBA replays the mainboard dir. Change-Id: I75dd9d1bcd09d835f205a51c087d52ebb4e166f6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Thomas Heijligen <src@posteo.de>
2019-07-08qemu-q35: die if started on wrong machinePatrick Rudolph
The QEMU machine "PC" doesn't support MCFG. Die after console init if the user selected the wrong qemu machine and print a message to use the correct machine type. Without this patch ramstage dies with non-helpful message: "get_pbus: dev is NULL!" Change-Id: I9d1b24176de971c5f827091bc5bc1bac8426f3f6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-08intel/socket_mPGA604: Enable TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: I3ca2b7752905209e8db6b1dc74b930445676792e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-08intel/fsp_broadwell_de: Remove redundant TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: I240e9e767c9b38b3b06d3978fd20ddb37a96e470 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-08intel/fsp_baytrail: Move TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: Ib61ea29724401146eb6f008374cdf599f418e81f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-08mb/google/hatch: Set GPP_D9 as enable pin for Goodix Touch Screen andFrank Wu
increase reset off delay time Goodix touchscreen cannot work in normal mode because PP3300_TOUCHSCREEN_DX dropped. Configure GPP_D9 as enable pin in the devicetree.cb to fix the power sequence. Increase reset_off_delay time from 1ms to 3ms to met the HW requirement. BUG=b:135287161 BRANCH=None TEST=local build and measure sequence with Goodix touch screen Change-Id: I33140869990aa4715c780b0fa322921e450530ef Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33808 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/google/hatch: Update GPIO settings for SD card and SPI1 Chip selectKrishna Prasad Bhat
This patch updates the following GPIO settings. 1. Set Native termination for GPP_G0 - G4 SD card pins. 2. Set GPP_B19 to NF1. BUG=b:123907904 TEST=Verified SD card functionality on hatch. Checked for SD detection, transferred files to and from SD card. Change-Id: I4549ac7377d7f58f51cda0eb96a62604fd31d2f2 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-07mb/google/hatch/var/kindred: Add Raydium touchscreen supportDavid Wu
Add Raydium controller BUG=b:135728282 BRANCH=master TEST= 1. FW_NAME="kindred" emerge-hatch coreboot chromeos-bootimage 2. boot up on kindred DUT to check touchscreen device by evtest /dev/input/event3: Raydium Touchscreen 3. Raydium TS is working Change-Id: Id963300ab0dadcb78786c5a1328c2a4098a48a05 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33857 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/google/hatch/var/kindred: Update ELAN GPIO/IRQ and add Synaptics TouchpadDavid Wu
Update ELAN GPIO and IRQ setting and add Synaptics Touchpad BUG=b:132708463 BRANCH=None TEST=Verify ELAN/Synaptics touchpad is working fine. Change-Id: I883ce2e50ca5c6bd2b1ca76cbe24177055cc5d60 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-07mb/google/hatch/variants/kindred: Enable eMMC supportDavid Wu
Enable eMMC support for kindred. Cq-Depend: chromium:1666982 BUG=b:135464155 BRANCH=none TEST=Boot kindred onboard eMMC. Change-Id: I040af6da30313f8dd59e3ef910b290922e090cdc Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33618 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/lenovo/g505s: Disable SeaBIOS options unsupported by hardwareMike Banon
G505S doesn't have any SAS or NVMe controllers and couldn't have a TPM, so it makes sense to disable the related SeaBIOS options for this board. This reduces the size of compiled SeaBIOS by 129344-110048=19296 bytes. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ib0183b7786ecd77bb0df923bc84908275f2fe14c Reviewed-on: https://review.coreboot.org/c/coreboot/+/33870 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07soc/intel/cannonlake, mb/google/sarien: Get rid of unused dev paramFurquan Shaikh
This change gets rid of unused dev param to pmc_set_afterg3. BUG=b:136861224 Change-Id: Ic197d6fb8618db15601096f5815e82efc2b539c1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-07mb/lenovo/t60: Align ACPI C-state across the similar boardsPeter Lemenkov
We have 3 similar Lenovo mainboards - x60 (oldest), t60, and z61t (most recent addition). The only one with two consequent 2s as the C-types is t60: static acpi_cstate_t cst_entries[] = { { 1, 1, 1000, { 0x7f, 1, 2, { 0 }, 1, 0 } }, { 2, 1, 500, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV2, 0 } }, { 2, 17, 250, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV3, 0 } }, }; It seems that 3 could be a better choice for the last line here. UNTESTED on a real hardware. Change-Id: I090e82d5f4ae25c768ff45a01a8dd76ff8a96a90 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-04pcengines/apuX: Replace use of dev_find_slot()Kyösti Mälkki
Find the NIC device based on the PCIe root port function. Change-Id: Ia8c6e115c9b836ee60862427dfc9d46ca3dd1b69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-07-04arch/x86: Adjust size of postcar stackKyösti Mälkki
With VBOOT=y && VBOOT_MEASURED_BOOT=y message digest will be allocated from the stack and 1 KiB reserve used with the recent platforms was no longer sufficient. The comment of LZMA scratchpad consuming stack was obsolete for postcar, so these can be reduced to same 4 KiB. Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-04amdfam10: Declare get_sysinfo()Kyösti Mälkki
It's forbidden to use dereference CAR_GLOBAL variables directly. The notation fails after CAR teardown for romstage. Change-Id: I6e6285ca0f520608c2a344517fbac943aeb36d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33995 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04amdfam10: Declare empty activate_spd_rom() stubKyösti Mälkki
Change-Id: I1d0940a08f7ae5901b812618a6859c4297274591 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-03aopen/dxplplusu: Replace use of dev_find_slot()Kyösti Mälkki
To use fixed PCI bus numbers is always invalid. Change-Id: Ia2ffdb1f5e0ff398674a016ad4cb94f622c057ff Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03aopen/dxplplusu: Remove PIRQ tableKyösti Mälkki
It was never tested or injected. Change-Id: I3fd82aaa11afc5adab212ec6709580b4bcc67ca3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34001 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Override DDI1 DDC SDA/SCL for Garg HDMIKevin Chiu
garg 2A2C DB: SKU ID - 1 garg HDMI DB: SKU ID - 9 garg LTE DB: SKU ID - 17 For HDMI SKU9, GPIO needs to be overriden to enable DDI1 DDC SDA/SCL. BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I6ad8e5aa52f503121b10fe353e4bf4021aee2061 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-07-03mb/google/octopus/variants/fleex: Enable EMR function for Grob360SChris Zhou
Enable EMR Pen Stylus function for Grob360S BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with HW reworked Fleex. Change-Id: Ia220dc0d3051b79b110b4df66df108f701776478 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33802 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Add custom SAR values for BlooguardTony Huang
Google project name is Bloog. Bloog is 12-inch LCD. Blooguard is 14-inch LCD so would prefer to use a different SAR values instead. Use sku-id to load the SAR values. BUG=b:135078377 BRANCH=octopus TEST=build and verify SAR load by sku-id Change-Id: Id80df28a961eb1f62714558df2b219aa552ecb97 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-02mb/google/hatch: Set trackpad irq and wake to GPP_A21Shelley Chen
Previously, We had to use GPP_A21 for trackpad wake and GPP_D21 for trackpad interrupts due to ITSS not honoring the INVERT config. Now that's fixed, we can configure trackpad wake and interrupts on GPP_A21 only. BUG=b:130436471 BRANCH=None TEST=1. boot a hatch device and make sure we can move the cursor with the trackpad 2. Run powerd_dbus_suspend and wake by clicking on the trackpad and ensure through "mosys eventlog list" that the wake source is the trackpad.\ 3. Run "echo mem > /sys/power/state", wait until device goes into S3, click trackpad to ensure device wakes. Change-Id: I26a99206c42ba442f91ae577b98366fc2fd6c0ca Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-02mb/google/hatch: Add INVERT to all IOAPIC padsShelley Chen
Now that ITSS config is fixed, we can set the IOAPIC pad configs correctly. BUG=b:123967687 BRANCH=None TEST=Make sure Hatch is booting and tested out trackpad to make sure can move cursor and wake by clicking on the trackpad after running powerd_dbus_suspend. Change-Id: I0b125996338b6f16e03b7ca184f6337c696a5f64 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33819 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02mb/google/reef/variants/: fix Samsung K4F6E3S4HM-MGCJ densityKevin Chiu
Samsung K4F6E3S4HM-MGCJ density is 16Gb BUG=b:121228792 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage MemTotal: 8041964kB in /proc/meminfo Change-Id: Ie8ecd82b92d4e82d3955cf773febca30f6280a5e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-01mb/up/squared: Add kernel cmdline parametersFelix Singer
Since ttyS0 isn't used for UART0, configure ttyS4 as default Change-Id: Ia0469226253b08328807d5401c05633296e43d22 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33785 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28asus/am1i-a: Enable UART according to CONFIG_UART_FOR_CONSOLEMike Banon
It has been observed by me and Elisenda Cuadros / Gergely Kiss [1] that the boot process of this board is super slow when UART 0 is being used - even if nothing is connected to it. Enable UART according to CONFIG_UART_FOR_CONSOLE - and, if UART 0 is selected, it will be initialized at romstage and this problem will not happen. [1] https://mail.coreboot.org/pipermail/coreboot/2018-February/086132.html Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I6579aa8fd092da84f8afdcc33496db45c582919f Reviewed-on: https://review.coreboot.org/c/coreboot/+/33796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-06-28mb/google/kohaku: Correct trackpad i2c addressSeunghwan Kim
Correct i2c address of trackpad. It should be 0x20. BUG=None BRANCH=None TEST=Verified trackpad works on pre-evt system Change-Id: I7ded21ce8ff9e907e436777a27edb4273512011d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-06-28mb/emulation/qemu-riscv: Use generic 8250 uart driverPatrick Rudolph
Drop hacked uart code and use the generic 8250 uart driver for ns16550a. Tested on qemu-system-riscv64: * The UART is still working. Change-Id: I6efda913fa39e0cfa466b52c570572aca90dacdf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33735 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Philipp Hug <philipp@hug.cx> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27mainboard: Add support for ASUS P8Z77-M PRO desktop mainboardVlado Cibic
Add support for ASUS P8Z77-M PRO desktop mainboard Working: - Tianocore and SeaBIOS boot - PS/2 keyboard and mouse - Audio - S3 Suspend, shutdown and reboot - USB2 / USB3 - Gigabit Ethernet - SATA3, SATA2 and eSATA - NVME - CPU Temp sensors - TPM - Native raminit and also MRC - PCIe GPU in all PCIe slots (16x/8x/4x) (linux) - Integrated graphics with both libgfxinit and Intel Video OpROM (all connectors VGA/DVI-D/HDMI) Signed-off-by: Vlado Cibic <vladocb@protonmail.com> Change-Id: I47d24ac8b236f929c3160f9a769b971d83710f9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/33328 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27mb/upsquared: Align partitions to 4KiBFelix Singer
This fixes warnings while booting coreboot. Change-Id: If1e99b74ded5f743a3ad4fc829ae9747276c483a Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33784 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27mb/asrock/h110m: set serirq_mode to continuous modeMaxim Polyakov
By default, the LPC SIRQ mode is set to Quiet mode. Therefore, COM-port from the SurerIO chip don't work correctly after the LPC controller (PCI 0:1f.0) initialization. Console output is broken. The patch fixes this bug by overriding the serirq_mode option in the devicetree.cb to set Continuous SIRQ mode Change-Id: I37e26b271fb61f6c0343d6bf65c029924df82caf Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33801 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-26mb/google/hatch: Add a GPIO to enable/disable FPMCU powerPhilip Chen
A FPMCU power-control pin (GPP_C11) is added to the latest hatch reference schematic. Even though this is not implemented in hatch rev1 board, the future hatch family boards with FPMCU should all have this control pin. On the old boards without this control pin, GPP_C11 is a floating TP, and thus this patch should be backward-compatible. BUG=b:130307667, b:135216932 TEST=build Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: I6a84eeb6aab562258e749a8a5d09dadfa0e43587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-26mb/google/hatch: Remove pulls on NC padsFurquan Shaikh
There is no need to add internal termination (PU/PD) on the not-connected pads. This change gets rid of the terminations on the NC pads. Change-Id: I3df538d7127e5ef75e6e6ff9db3524e26f0450ed Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-06-26mb/google/hatch/variants/baseboard: Update PL2 power limit valueSumeet Pawnikar
Update PL2 power limit value from 44W to 64W. BUG=None BRANCH=None TEST=Build and Boot hatch EVT Change-Id: I3f4b5ab8bf0ce9464c322c148843f5a3e8d706d9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-06-26mb/up/squared: Remove unnecessary codeFelix Singer
This patch removes unnecessary code which configures default FSP values. Change-Id: If7dae4f24a9fcb01d2d47063dd3a0f4ce6c120d2 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-25atlas: enable GEO_SARCaveh Jalali
BUG=b:131634035 BRANCH=none TEST=verified SAR data shows up in ACPI SSDT table. Change-Id: I65ef59c9616b1cae3fa4c4b18bbfe4ed098d2891 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-25intel/945 boards: Use smp_write_pci_intsrc()Kyösti Mälkki
Radically reduces line lengths and splits '(bus<<2) | INT' to separate parameters. Change-Id: I0cfd714da3d2773affdb34d1dab2ac32879e2cfd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30740 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-25mainboard/facebook/fbg1701: Set CBFS_SIZE to 0x600000Frans Hendriks
CBFS_SIZE equals size of whole SPI device. The descriptor and ME need to be placed in bottom part. Reduce the CBFS_SIZE to maximum avalaible size. BUG=N/A TEST=Boot Embedded Linux 4.20 on Facebook FBG-1701 Change-Id: Iecfae4573100c6787b6e8b1c4f2583a7fb3d95a3 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-06-25mainboard/facebook/fbg1701: Use LCD Panel type for name of tablesFrans Hendriks
tc348860_table contains the eDP to MIPI Bridge controller type. b101uan08_table used the LCD Panel type. Use LCD Panel type for name of tables. Remove the incomplete resolution comments and specify the resolution at the start of the table to 1200x1920. BUG=N/A TEST=Config eDP and verify LCD panels are working on Facebook FBG-1701 Change-Id: Ic152ea1f95f155ab76638b57a259d37ce6f43037 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33736 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-25mb/lenovo/z61t: Remove `fn_ctrl_swap` optionPeter Lemenkov
It seems that the EC on t60/x60/z61t doesn't support it. This wasn't even introduced in z61t so let's remove the remaining bits. This commit follows up on commit a5fcc2e4 with Change-Id Id2964002406a5fcf992f0ffc3627e3f66a2bb13f ("mb/lenovo/x60/t60: Remove `fn_ctrl_swap` option"). Tested on a real hardware. Change-Id: Ifd5e7823af305cc4a0194ee2097a749e43680c55 Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Andrey Korolyov <andrey@xdel.ru>
2019-06-24mb/gigabyte/ga-h61ma-d3v: Add new mainboard as variantAngel Pons
Tested with SeaBIOS as a payload, booting Arch Linux with a Linux kernel. The new code is based on autoport and the existing GA-H61M-S2PV code. The GA-H61M-S2PV has been boot-tested too, it still boots. Working: - S3 suspend/resume - USB ports and headers (Intel USB2 and EtronTech USB3) - Gigabit Ethernet - Integrated DVI/VGA graphics (libgfxinit) - PCIe x16 graphics - PCIe x1 ports - PS/2 port with a keyboard - SATA controllers (Intel SATA2 and Marvell SATA3) - User-space fan control (fancontrol on Linux) - Native raminit (4+4GB DDR3-1333) - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. Backup chip is untested. Untested: - VGA BIOS for integrated graphics init - Audio: Only front/read outputs has been tested. - Non-Linux OSes - ACPI thermal zone and OS-independent fan control Not working: - Default IFD defines the BIOS region as the entire flash chip. Using 'flashrom --ifd -i bios' is asking for a failed flash! Change-Id: I37928de158bb8fbb47fbda5d1ccd4efba7edab26 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-22mainboard/facebook/fbg1701: Configure TC358860 eDP to MIPI controllerFrans Hendriks
FBG1701 contains a TC358860 eDP to MIPI Bridge controller which needs to be configured. Add mainboard_configure_edp_bridge() to program the controller. CPLD version is used to determine which table must be programmed. The eDP is an i2c slave which expects the next i2c bus data for block write: <Slave Addr> <Reg Addr[15:8]> <Reg Addr[7:0]> followed by data with LSB first. BUG=N/A TEST=Config eDP and verify LCD panels are working on Facebook FBG-1701 Change-Id: I262cb4376b86db94e3bb9522c556b5cc3ff38335 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21mb/asrock/h110m: Correct Kconfig symbol selectionAngel Pons
The asrock/h110m has a NCT6791D, but is selecting the NCT6776-specific SUPERIO_NUVOTON_NCT6776_COM_A symbol. Use the NCT6791D symbol instead. Change-Id: I9f3fde161844f919b070f2b6ce7e106411439a9a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <m.poliakov@yahoo.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-21mb/ocp/wedge100s: Use the new IPMI driverPatrick Rudolph
* Enable decoding the IPMI KCS to LPC * Select the IPMI driver * Add the PNP device that holds the IPMI KCS base address Tested on Wedge100s. Change-Id: I35634bbcbe6893bd72ec7e41f6ca7bba09d819a2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-21mb/lenovo/x201: Remove duplicated includePeter Lemenkov
Change-Id: I0917f11091b8c93c21c0e25690440b7dd0e9c8ba Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-06-21mb/facebook/fbg1701: Remove unused Kconfig symbolsArthur Heymans
Change-Id: Ifc61fd11c9d7a4d192eaae73c5421f643d27d817 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21mediatek/mt8183: support SAMSUNG and MICRON EMCP LPDDR4X DDR bootupHuayang Duan
Support SAMSUNG KMDP6001DA-B425 and MICRON MT29VZZZAD8DQKSL EMCP LPDDR4X DDR From the calibration log of MICRON MT29VZZZAD8DQKSL, we found the begin pass range of RX window earlier than with other DDR type. So need change the DQS starting offset to increase the scan range of RX window. BUG=b:80501386 BRANCH=none TEST=Boots correctly on EMCP DRAM Change-Id: I5fcc8673a2fbd7ec3a8776ab61c57f8903ddda20 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
2019-06-21mb/google/octopus: Override VBT selection for GargKevin Chiu
Garg proto build has 3 SKUs: garg 2A2C DB: SKU ID - 1 garg HDMI DB: SKU ID - 9 garg LTE DB: SKU ID - 17 For SKU#9, VBT will need to be overridden to enable DDI_C output to HDMI BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Cq-Depend: chrome-internal:1380847 Change-Id: I6c0ec086496eaf217ea8e326f5084d886d0e698f Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-06-21mb/google/octopus: expose get_board_sku as globalKevin Chiu
BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I1fb7b5eeac48f2cd9c24fa1d3ac3fe4b390762d2 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33448 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mb/emulation/qemu-riscv: Support arbitrary ROM sizesPatrick Rudolph
Make the linker script dynamic to support non default ROM sizes. Prevents weird runtime issues due to stages overwriting parts of the CBFS while decompressing stages. Change-Id: I37b9187c719b907959f02a272ec0459aabbcda3c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2019-06-21mb/google/hatch/variants/kindred: Update memory strap GPIOsDavid Wu
According to the latest schematic (b:127996858#comment38), MEM_CONFIG_0 --> GPP_H19 MEM_CONFIG_1 --> GPP_H22 MEM_CONFIG_2 --> GPP_F10 MEM_CONFIG_3 --> GPP_F3 BUG=none BRANCH=none TEST=Boot kindred proto board Change-Id: Ib79f9454116583a94fe1fd53a37ed928d32988d5 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-06-21sb/intel/bd82x6x: Set up io_gen_dec in romstage based on devicetreeArthur Heymans
Set up generic decode ranges based on the devicetree settings. Change-Id: Ie59b8272c69231d6dffccee30b4d3c84a7e83e8f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-21mainboard/facebook/fbg1701: Remove unused includesFrans Hendriks
Files onboard.h and mainboard.h are not used for building. Remove these files as include. BUG=N/A TEST=Build and boot embedded Linux 4.20 on Facebook FBG-1701 Change-Id: Ifeb0047357e641cbe1affbbaf5402213802c774c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-21mainboard/facebook/fbg1701/fadt.c: Use asl_revisionFrans Hendriks
Fix value of 1 is used for asl_compiler_revision. Use asl_revision for this. BUG=N/A TEST=booting Linux 4.20 kernel on Facebook FBG1701 Change-Id: Iffd8fe637d4669b7099fb6eafc9873560502bf80 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-06-21soc/intel/skylake: Clean up KconfigArthur Heymans
This does the following: - select MAINBOARD_USES_FSP2_0 on Kabylake (does not support FSP1.1) - Remove stale Kconfig option on intel/saddlebrook - select SOC_INTEL_KABYLAKE on intel/kblrvp Change-Id: I64f48eeb00150aea039d533b0ac471fdd8483b90 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-21qcs405: Update bootblock sizeNitheesh Sekar
Increase the size of bootblock from 96K to 128K. Change-Id: Ifc6e7239ed2978a8490fa229945ebd5ed9182298 Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33159 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mb/google/hatch: Do not pull down GPP_F2 internallyPhilip Chen
There is already an external pull-up/down resistor tied to this pin to identify if the board is single-channel or dual-channel memory SKU. BUG=b:135496271 BRANCH=none TEST=build Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Ie218657fd9dde113ab26cf5551d1dff1b6e392b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-21mb/lenovo/x201/smihandler.c: Remove useless smihandler codeArthur Heymans
This code to handle the brightness from SMM is copied from the Lenovo Thinkpad X60 code, but does not work on later generation. The PCI device it tries to address does not even exist on those devices. Change-Id: I0c25c3e5bec651b27158a84cc91289639a04ceb6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-21mb/packardbell/ms2290/Kconfig: Remove ARCH_x optionsArthur Heymans
Those are already selected in cpu/intel/model_2065x/Kconfig. Change-Id: I7421faa24b8a95d2780bce0651cde0bfeb357833 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21mb/*/{x201,packardbell}: Remove unused C-state generation functionsArthur Heymans
Those are copied from Lenovo X60 code, but are unused. NOTE: No ACPI C-state are generated on this platform but Linux has a separate driver for that. Change-Id: Ie9b49f5451d8cde9c36672cac1f0f14cb3f0095e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33140 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21sb/intel/ibexpeak/smihandler: Move finalizing to a common locationArthur Heymans
TODO: There is no reason to do this in SMM. Change-Id: I8bbb2f65bbe674bd1bc4ae8a4086bd1f5e9a79fa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33139 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21siemens/mc_apl5: Change PTN interface settingsMario Scheithauer
Switch the default clock output for single LVDS mode to odd bus only. Change-Id: I278e761566a112d95cbd6c79e09c076d70b93e8f Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-06-21siemens/mc_apl5: Enable TPM supportMario Scheithauer
This patch enables TPM on SPI and adds the needed devicetree entry for mc_apl5. TEST=Build coreboot for mc_apl5 board and check the TPM console output. In addition the TPM was correctly verified by our Linux driver. Change-Id: Iafc967c7a2bfee9bdb9b6591d12328620e2887cc Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33173 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21google/kukui: Increase SPI flash speed to boot fasterMengqi Zhang
Increase SPI flash speed from 26MHz to 56MHz and set correct tick_dly to get faster boot process. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: I8f44883b4f4a198146330caf5420dc39d5592a0a Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32462 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mediatek: Add SPI tick_dly settingMengqi Zhang
Add spi tick_dly setting for high-speed spi xfer. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: Ie49fc3efe2a4a6dcdf2a2fc4c91b47e35d4f086e Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mediatek/mt8183: Add SPI GPIO driving settingMengqi Zhang
Set SPI GPIO driving to support SPI FLASH. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: I95002ec71abd751c33c089185db04ed4a8686699 Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32460 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21google/kukui: Enable RTCYou-Cheng Syu
Enable RTC so that we can see correct timestamp in CrOS eventlogs. BUG=b:134461866 TEST='mosys eventlog list' shows correct timestamp on Kukui Change-Id: Ie9ef7c9343c781e348429cd5376a4a5519641e16 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-06-21google/kukui: Revise FMAP firmware layoutHung-Te Lin
Adjust FMAP sections that - ELOG only needs 4K (by driver limitation) - SHARED_DATA only needs 4K or less (for netboot params) - SMMSTORE is probably not needed since UEFI@ARM is not available yet - VPD can be smaller (most x86 devices have only 16/8K for RO/RW) - Increase RW_LEGACY to 1M (recommended value) - Move all new saved space to CBFS BUG=b:134624821 TEST=Built Kukui image and boots on Rev2 units. Change-Id: Id2910df73ea47bfa32e056d631d1c3e5f1eed0d1 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mb/google/snappy: Remove unneeded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: I7b6c319a58b9f4f47de19336d18d00b73d3d3772 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21mediatek/mt8183: Calibrate vsim2 to 2.7 VHsin-Hsiung Wang
The default voltage of vsim2 is set to 2.76V for sim card usage. In general, 2.76V of vsim2 is composed of 2.7V main voltage and 0.06V calibration voltage. However, vsim2 is used for the tx_ovdd power of display port IT6505 on the kukui board design which needs 2.7V. So we set it to 2.7V with modifying calibration value. BUG=b:126139364 BRANCH=none TEST=measure vsim2 voltage with multimeter Change-Id: I4dffdde89cbde91286d92e6c2b445f0b3d0ad2fe Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-20mb/google/hatch: Remove unused USB2 port5 from baseboard devicetreeAamir Bohra
Hatch newer board revision do not use USB port5 for discrete BT. Hence remove the port configuration and UBS2 P5 asl entry. The older board version would continue to use USB2 P5 hence moved the entry to overridetree.cb Change-Id: I98297d6b81e3184b7b0a14710f3790f5df30d68b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-06-19mb/intel/whl_rvp: Configure FSP UPDs of DDI ports for whlrvpsridhar
This patch configures FSP UPD values for HPD and DDC of DDI ports for WHLRVP. BUG=none TEST=Tested that eDP & DP works on WHLRVP Signed-off-by: Usha P <usha.p@intel.com> Signed-off-by: sridhar <sridhar.siricilla@intel.com> Change-Id: I576469f5564e3e56159762752dbe4557e9dc1912 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33435 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19{mb,sb}: Use get_acpi_table_revision(FADT)Elyes HAOUAS
Change-Id: Id3d7f021a52e08906ae0a3f794756e397601fe96 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33428 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19grunt: Change Bayhub eMMC base clock to 200MHzRaul E Rangel
The clock was previously set to 52MHz to workaround the fact that depthcharge didn't support tuning. Tuning has now been enabled in depthcharge: https://chromium-review.googlesource.com/c/chromiumos/platform/depthcharge/+/1655553 BUG=b:122244718 TEST=Verified on grunt that it speeds up boot by 130ms Change-Id: If847cea2a7848bcd175958db86e652d4f710201a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-19src/mainboard: Remove unused include <arch/byteorder.h>Elyes HAOUAS
Change-Id: I3d638febddbd88cd4870795f96dd1bbf123c7ba3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33537 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19mb/lenovo/*/romstage: Remove unused include byteorder.hPeter Lemenkov
Change-Id: I3e500aafd26b7524a6782883b9a30f55b544102d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33511 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19mb/lenovo/z61t/romstage: Remove unused includePeter Lemenkov
This commit follows up on commit commit 89989cf6 with Change-Id: I1f44ffeb54955ed660162a791c6281f292b1116a ("src: Drop unused include <arch/acpi.h>"). Change-Id: I3dc12373b32b95d25ba7b302cbca5f927678315d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33365 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19mb/lenovo/t60/romstage: Remove unused includePeter Lemenkov
This commit follows up on commit 8b7a1614 with Change-Id: I73c557d6ef009fb2cac35fdea500dee76f525330 ("src/mainboard: Remove unneeded include <arch/io.h>"). Change-Id: I7f307bf5b6cdcfebe1a290ce344b962fcecc8781 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-19mb/lenovo/x201: Remove unneeded includesPeter Lemenkov
Tested: still builds fine. Change-Id: I1ca4e42bd75a3e84afe8b30a60f02058b590416f Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-19mb/google/hatch/variants/hatch: Adjust all I2C CLK to meet specJohn Su
After adjustment on Hatch Touch Pad CLK: 383.4 KHz Touch Screen CLK: 381.6 KHz SAR Sensor CLK: 392.0 KHz Audio codec CLK: 386.0 KHz BUG=b:134911522 BRANCH=master TEST=emerge-hatch coreboot chromeos-bootimage measure by scope with hatch. Change-Id: Iee2b692c268381af267b70e92a577ac89ce41cbb Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-17mb/google/poppy/variants/atlas: Update DPTF parameterPuthikorn Voravootivat
The temperature delta between on-board thermistor and surface temp change, so update DPTF parameter accordingly. BUG=b:113101335 TEST=Tested in thermal chamber by thermal team. See comment 148 / 153 in the bug. Change-Id: Ie18be94fc1e7476755fb0e6947cce559854a82dd Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2019-06-17src/mb/gigabyte/ga-h61m-s2pv: Correct devicetreeAngel Pons
Subsystem IDs were missing and GPIO settings were wrong. Plus, the PCI bridge was erroneously enabled, this board uses an ITE IT8892E PCIe to PCI bridge instead. Tested, board still boots. Change-Id: Ieb9dd8c835bc3652e7a3a118feca5551196bb81b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-16mb/google/hatch: Move memory strap GPIOs under variant gpio headerAamir Bohra
Move the memory strap gpios to variant/gpio.h, as the memory straps are different for helios. Change-Id: I1833c9539687011ee27fd3e88c0581e30ca59354 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-16mb/lenovo/*/smihandler: Remove unused includePeter Lemenkov
All usage of pci_read_config8 was removed in commit d44d4f0f with Change-Id Ia959eb5b747846048396e66d4c926c96c27f3878 ("mb/lenovo/*: Remove useless smihandler code"). So we don't need this include anymore. Change-Id: Ic4f038c80e17799016ae7e92a5675cfe7c71e400 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-15mainboard/google/hatch: Scrub Helios GPIOsTim Wawrzynczak
Helios has a number of GPIO changes w/r/t to its baseboard. Override early, sleep and normal GPIOs as appropriate. BUG=b:135257452 BRANCH=none TEST=Compile only (no boards to test with) Change-Id: I45793ad6515df5af5b925d92106bd943374353d4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-15mb/google/octopus/variants/bloog: Set tcc offset for bloogTony Huang
Change tcc offset from 0 to 10 degree celsius for bloog. BUG=b:135225497 BRANCH=octopus TEST=Build and verify test result by thermal team. Change-Id: I4cbff846914a776c67692005f8b40cd73cfaf231 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-06-14mb/google/poppy/var/nami: Ensure SPD index is non-zeroJacob Garber
Memory id's are 1-indexed for DDR4, so we need to check that the SPD index is non-zero before converting it to the 0-indexed value in the bitmap. Change-Id: Icc542239d91c39b89c23f31856c28e7c20b2fc4d Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1387028 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-14nb/i945: Drop CHANNEL_XOR_RANDOMIZATION selectionElyes HAOUAS
CHANNEL_XOR_RANDOMIZATION is configurable for no reason. Change-Id: I31e6ed6cb040dcba756cbfd2247d90753d372915 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-14hatch: Fix pen eject wake polarityTim Wawrzynczak
The gpio_key wakeup_event_action in the ACPI tables was backwards, causing devices to wake up on pen insertion instead of removal. Changed to EV_ACT_DEASSERTED. BUG=b:134547896 BRANCH=none TEST=Verified in OS, device only wakes up on pen removal Change-Id: I0816ed9fb23cf00fd8e40bcdd25ff7a9f48badbd Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33427 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-14mainboard/google/hatch: Update Helios device treeTim Wawrzynczak
Update Helios device tree override to match schematics. BUG=b:133182138 BRANCH=none TEST=Compiles Change-Id: I3d15fc43651a289d16ffb3cfadaea8f786e858fc Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33050 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13mb/google/hatch/variants/helios: Use LPDDR3 memoryPaul Fagerburg
Change the SPD makefile to use the LPDDR3 SPDs. Set up the arrays for mapping SoC DQS pins to LPDDR3 pins. BRANCH=none BUG=b:133455595 TEST=`FEATURES="noclean" FW_NAME="helios" emerge-hatch chromeos-ec depthcharge vboot_reference libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch coreboot chromeos-bootimage` Ensure the firmware builds without error. Change-Id: Iebaba2ec65dfcf36674b4733b421ada107b22b09 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33456 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13mb/google/sarien: Disable unused GPIOsDuncan Laurie
These 4 GPIOs are being disconnected in the next board so use the board ID to configure these pins as not connected to ensure they do not cause leakage. Also remove the ACPI _PTS S5 code that was configuring the GPIOs. This does mean they will cause small leakage in S5 on existing boards, but it will not affect the new boards. BUG=b:132393441 TEST=boot on sarien with fake board ID and ensure that coreboot configures these pads as expected. Change-Id: I6ac04b9a635829811a09aeab7cba3bb58cfcff47 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2019-06-13mb/google/{hatch, sarien, arcada}: Make HECI1 chip config disableSubrata Banik
This patch is not actually disabling HECI1 as it requires a dedicated FSP UPD for WHL/CML SoC code to set this HECI1 chip config. Change-Id: Ia88f3315a9dc3365d0acc13ed887e7c596c97c91 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 22:14:50 +0000