summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2022-03-29mb/google/skyrim: Disable PSP postcodesKarthikeyan Ramasubramanian
ESPI is not initialized in PSP. Hence any attempt to write to port80 causes failure to boot. Disable PSP postcodes for now and re-enable it later after ESPI is initialized in PSP. BUG=b:224618411 TEST=Build and boot to OS in Skyrim. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I73b7ddec50936f7836f915f459ca0bdc0777cb22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-29mb/google/cherry: Pre-initialize PCIe at the bootblock stageJianjun Wang
Described in PCIe CEM specification sections 2.2 (PERST# Signal) and 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should be delayed 100ms (TPVPERL) for the power and clock to become stable. Instead of asserting PERST# right before PCIe initialization and waiting for 100ms, which is currently the only function of 'mtk_pcie_pre_init', so that the extra 100ms delay in ramstage is avoided. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Id5b9369e6f8599f93415588ea585c952a41c5e7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29mb/google/brya/var/felwinter: Update GPP_E19 from NF to NCJohn Su
Configure GPIO according to b:224107199 comment#15. - GPP_E19 from NF to NC. BUG=b:224107199 TEST=emerge-brya coreboot Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I06d02c5a8b6cf65d5643eaf30fb277c3321dac8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/63116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-03-29mb/google/cherry: support max98390 audio ampTrevor Wu
The Cherry follower projects may choose Max98390 for audio output so we have to add a new config CHERRY_USE_MAX98390. Also, the 'dojo' device is the first one to use it. BUG=b:204391159 BRANCH=cherry TEST=emerge-cherry coreboot TEST=Verify beep function through CLI in depthcharge successfully Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Change-Id: I9b6bc5a5520292dd502b0389217f5062479b4490 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63083 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-29src/mainboard/starlabs: Remove unused <option.h>Elyes Haouas
Found using: diff <(git grep -l '#include <option.h>' -- src/) <(git grep -l 'sanitize_cmos(\|get_uint_option(\|set_uint_option(\|get_uint_option(\|set_uint_option' -- src/) |grep "<" Change-Id: Ib79dfa73b8a30ae1b1e432318bd42e4e3d845af3 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-03-28mb/google/skyrim: Implement mb_set_up_early_espiRaul E Rangel
This will setup the eSPI GPIOs in bootblock right before eSPI init. BUG=b:226635441 TEST=build skyrim Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6ff32bf840aa4b757e98d876cbd4e2ba15a760da Reviewed-on: https://review.coreboot.org/c/coreboot/+/63094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-28mb/google/skyrim: Swap eSPI_CS_L and SOC_DISABLE_DISP_BLRaul E Rangel
The eSPI CS function only exists on AGPIO30. We will need to rework all boards to make eSPI function. I also fixed the comments on the other eSPI pins. BUG=b:226635441 TEST=Build skyrim Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib03c0a7dcad31d10dd4bad0d10a0184ab84aef9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-27mb/google/skyrim: Add DXIO descriptorsJon Murphy
Add Skyrim DXIO descriptors using info from AMD and skyrim bouard shematics. BUG=b:225179599 TEST=Boots to OS on Skyrim Board Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ib68cf3d64641b006e0f2c4805af22b44a505a0d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-27mb/google/hatch/moonbuggy: Update GPIOsPablo Ceballos
Implement the GPIOs that have been changed from genesis. - Connect scaler UART on pins C12/C13 - Connect the HDMI redriver I2C on C18/C19 - Connect the iMX8 signals on D1/D2/D3/D21/D22 - Connect the EC interrupt on D14 (same as on scout) - Connect PCH_TYPEC_UPFB on E15 (same as on genesis) - Configure as not connected the following unused pins: D23, E11, E12, F11 -> F22, H0, H8, H9 BUG=b:200876872 TEST=moonbuggy boots Change-Id: Ie9cafe81e391bce6ab7ffbe23c2d57b407d146f3 Signed-off-by: Pablo Ceballos <pceballos@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-27mb/google/brya/var/banshee: Add mic mute switch settingFrank Wu
Using the GPP_F22 as mic mute switch based on the latest schematic. BUG=b:223737606, b:216110896 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage The mic_mute event is changed when the mic_mute GPIO pin is switched. Event: time 1647939954.639995, type 5 (EV_SW), code 14 (SW_MUTE_DEVICE), value 0 Event: time 1647939954.639995, -------------- SYN_REPORT ------------ Event: time 1647939954.648152, type 5 (EV_SW), code 14 (SW_MUTE_DEVICE), value 1 Event: time 1647939954.648152, -------------- SYN_REPORT ------------ Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I6f7176afbd64f7c080f02369f195043a2df88e5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-27mb/google/brya/variants/baseboard/brask: set GPP_D0 to GPOZhuohao Lee
Currently, we control the GPP_D0 in the flash_fp_mcu in order to program the component's firmware. If we set this pin to NC, then we can't control the GPP_D0 output low/high and that make the system fails to program the component's firmware. This patch sets the GPP_D0 to GPO to fix it. BUG=b:204679292 BRANCH=firmware-brya-14505.B TEST=program the component's firmware Change-Id: I2f58c324f807a067dbe338f044a33dc9622ca469 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-27mb/google/brya/var/brya0: Replace amp max98357 with max98360Amanda Huang
Based on Brya EVT schametic, replace audio amp max98357 with max98360. Add a new audio FW_CONFIG field to support ALC5682I+MAX98360. BUG=b:224423056 BRANCH=firmware-brya-14505.B TEST=dmidecode -t 11 Change-Id: I3033e31cf5c2dade02dc19531f5e5365eeeb7a78 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-27mb/intel/adlrvp: Select VBOOT_MOCK_SECDATA for ADL-NUsha P
Use MOCK TPM in vboot, since TPM is not enabled in ADLN RVP. BRANCH:NONE TEST=build and boot ADL-N RVP. Verify no TPM errors in depthcharge. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: Ibc0112545dbd80921d89d48eff58c512729243af Reviewed-on: https://review.coreboot.org/c/coreboot/+/62957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-03-25mb/google/guybrush/var/dewatt: Use exclusive SPD IDs for Samsung partsRobert Zieba
Parts K4U6E3S4AB-MGCL and K4UBE3D4AB-MGCL require special handling. This commit assigns them exclusive IDs 9 and 11 to facilitate this. BUG=b:224884904 Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: I01ea1442b20849a404cf397614c25a441cc84c4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-25mb/*/BiosCallOuts.c: Fix unused variableArthur Heymans
This fixes clang builds. Change-Id: Ie09fae149a9530ad45f0cd5945e73f46484ef385 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-03-25mb/google/skyrim: Increase RW_MRC_CACHE FMAP region sizeKarthikeyan Ramasubramanian
ABL generates memory training data whose size is ~80KiB. So increase the RW_MRC_CACHE region size to accommodate that. BUG=b:224618411 TEST=Build and boot to payload in Skyrim. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Id2040026a1fe2b3f760724023e2e252e137b31c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-25mb/google/brya: Adjust FMD file to chromeos.fmd for kanoDavid Wu
The separate FMD file for Kano is no longer required, as it was only required for early prototype testers, and those devices will be retired soon, therefore switch back to the original FMD file. BUG=b:226018550 TEST=Build pass. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I09833039a450fa014e8e501bde9fec6e7ed59c7a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-25drivers/i2c/tpm: Work around missing board_cfg in Ti50 FW under 0.15Eric Lai
Ti50 FW under 0.15 is not support board cfg command which causes I2C errors and entering recovery mode. And ODM stocks are 0.12 pre-flashed. Add workaround for the old Ti50 chip. BUG=b:224650720 TEST=no I2C errors in coreboot. [ERROR] cr50_i2c_read: Address write failed [INFO ] .I2C stop bit not received Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ieec7842ca66b4c690df04a400cebcf45138c745d Reviewed-on: https://review.coreboot.org/c/coreboot/+/63011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-03-25mb/dell/snb_ivb_workstations: Add Precision T1650 supportMichał Żygowski
Precision is a Mid Tower chassis platform with very similar mainboard to OptiPlex 9010. It has one more PCIe port and a PCI port. It also incorporates C216 chipset instead of Q77 and enables DRAM ECC support. Other changes are related to subsystem ID and fan control initialization. TEST=Boot Dell Precision T1650 and launch Debian 10. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I4ec2013d5f53af36cab0d1def19272f5ef1a9516 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-03-25mb/dell: Convert OptiPlex 9010 into directory with variantsMichał Żygowski
New boards like Dell Precision T1650 will be added as variants, in subsequent commit. They share most of the code, except some EC initialization tables, PCIe port configuration and subsystem ID. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I4075f0ae3b24892fcc2be07061a01f8070659239 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2022-03-24mb/google/brya/var/gimble: Include 4 new SPDsMark Hsieh
Add the four SPD files for LPDDD4 memory parts below to gimble: 1. Hynix H54G56CYRBX247 2. Hynix H54G46CYRBX267 3. Samsung K4UBE3D4AB-MGCL 4. Samsung K4U6E3S4AB-MGCL BUG=b:191574298 TEST=USE="project_gimble emerge-brya coreboot" Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I143207cda066603051803b9008eb2e2364f16e46 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-23mb/google/guybrush/var/nipperkin: update telemetry settingsKevin Chiu
Update the two load line slope settings for the telemetry. AGESA sends these values to the SMU, which accepts them as units of current. Proper calibration is determined by the AMD SDLE tool and the Stardust test. VDD scale: 73331 -> 94623 VDD offset: 1893 -> 1847 SOC scale: 31955 -> 29904 SOC offset: 852 -> 756 BUG=b:217963719 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage pass AMD SDLE/Stardust test Change-Id: Icad97644dd9391a325dfe1dbb1ec176e1f6d3dc3 Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-23mb/google/skyrim: Fix Backlight GPIOJon Murphy
Backlight GPIO was set to HIGH, when it should have been set LOW to enable the backlight in the embedded display. BUG=b:224618411 TEST=load on Skyrim proto1, observe backlight Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ife3335ca5a3c2517a6817fccf0544e5fcacb1f9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/63003 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-23soc/amd/cezanne: Turn off gpp clock request for disabled devicesRobert Zieba
The current behavior does not actually check if a device is present before enabling the corresponding gpp_clkx_clock_request_mapping bits which may cause issues with L1SS. This change sets the corresponding gpp_clkx_clock_request_mapping to off if the corresponding device is disabled. BUG=b:202252869 TEST=Checked that value of GPP_CLK_CNTRL matched the expected value when devices are enabled/disabled, checked that physically removing a device that is marked as enabled also disables the corresponding clk req BRANCH=guybrush Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: I77389372c60bdec572622a3b49484d4789fd4e4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61259 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-23mb/google/brya/var/taniks: Increase TSR2 threshold from 40 °C to 70 °CJoey Peng
Change settings according to thermal team test results BUG=b:215033682 TEST=build and tested fan works normally on taniks Change-Id: I567815782ece4ab7fcec7da6b787ee9eec27aba4 Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-23mb/dell/optiplex_9010/sch5545_ec.c: Fix HWM initialization bugsMichał Żygowski
Fix the HWM sequence matching to the chassis. HWM sequence for SFF was incorrectly passed to MT chassis HWM initialization. Vendor code also applies a fix-up for MT/DT chassis. This fixup was missing one register read compared to the vendor code. Add the missing read and guard the fixup depening on the returned value to match the vendor code behavior. Not doing so resulted in increased fan speeds on Dell Precision T1650 compared to Dell's firmware. TEST=Boot Dell Precision T1650 and hear the fans are as silent as on Dell's firmware Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I5c0e1c00e69d66848a602ad91a3e83375a095f44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2022-03-23mb/google/dedede/var/beadrix: Enable LTE function by FW_CONFIG optionTeddy Shih
Enable/disable LTE function based on LTE field of FW_CONFIG. 1. GPIO control 2. USB port setting BUG=b:213582491 BRANCH=dedede TEST=FW_NAME=beadrix emerge-dedede coreboot Change-Id: Icea44992e2e3195d1fd9a888f5ce4650f82280bb Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62801 Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-23mb/google/brya/var/primus{4es}: add delay time to rtd3-coldTerry Chen
This CL adds the delay time into the RTD3 sequence, which will turn off the eMMC controller (a true D3cold state) during the RTD3 sequence.We checked power on sequence requires enable pin prior to reset pin, added delay to meet the sequence and test passed on various eMMC SKUs.Base on BH799BB_Preliminary_DS_R079_20201124.pdf in chapter 7.2. BUG=b:224648680 TEST=USE="project_primus" emerge-brya coreboot chromeos-bootimage test suspend stress 2500 cycles passed on primus Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I1ab4fdf0ee73b819b3c203e995ac9d5ae0d24bd0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-22mb/google/brya/var/moli: Fix overridetreeTim Wawrzynczak
Commit 5a0ad1186 missed one chip config member that got converted to snake case in commit 215a97ee1. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie92106f0fee0bb18863b7063c07673e0f7995c74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63005 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Martin L Roth <martinroth@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-22mb/google/brask/variants/moli: init overridetree for moliRaihow Shi
init overridetree.cb based on the schematic adl_rfq_mb_20220310.pdf BUG=b:220814038 Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I8829d4b39d48ae574eeccbfc62e79b671211ae2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-22mb/google/brya/variants/crota: set up gpioTerry Chen
Set the GPIO configuration of crota by bernadino 14 adl-p 20220112.pdf BUG=b:219891328 Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I164bc7a8b682eb8682f02b06708bc7c72a5c449a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-22mb/google/brya/var/kinox: Modify DDR4 to non-interleavedDtrain Hsu
Kinox is designed to 8-layer PCB. In order to reduce the length of memory singals, the DDR4 is designed from interleaved to non-interleaved. BUG=b:210094309 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I03c6fcccf8b1646cec1a35cc1f9cbb1cfb942c4e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-22mb/google/brya/var/taeko: Disable GL9763e PCIE port L0sKevin Chang
GL9763e doesn’t support L0s state, so disable L0s at the root port. BUG=b:220079865 TEST=Build FW and run stress exceed 2500 cycles. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I6ed790c833d1c01a30aed0fd09cac260a3837ead Reviewed-on: https://review.coreboot.org/c/coreboot/+/62973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
2022-03-22mb/google/brya/var/taeko: Enable Genesys L1 max entry delayKevin Chang
The workaround causes the eMMC controller to not enter its L1 during the boot process BUG=b:220079865 TEST=Build FW and run stress exceed 2500 cycles. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I142a816611e204e6c8577d15b3f0a0e08251f848 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <martinroth@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
2022-03-21mb/google: Remove unused cpu deviceYu-Ping Wu
The cpu device listed in MediaTek platforms' devicetree.cb doesn't actually do anything, except causing an error during device initialization: CPU: 00 missing read_resources Therefore, remove it from the devicetree. BUG=b:224419346 TEST=emerge-corsola coreboot TEST=Krabby booted up successfully BRANCH=none Change-Id: Ibf9f7cf65da6a0dd0a0e1f556d5772573ba3e930 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62805 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-21mb/amd/chausie: add APCB binaries if availableFelix Held
The APCB files that provide the firmware components running on the PSP some mainboard-specific information like the DRAM interface configuration. Those files aren't yet in the upstream 3rdparty/blobs repository, so only add those files if they are present and print that no APCB was added and the image won't boot if they aren't present. TEST=Both cases behave as expected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1e8621901741b8b0531fe134273b47e85911e19f Reviewed-on: https://review.coreboot.org/c/coreboot/+/62925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-03-21mb/amd/chausie/chromeos.fmd: increase A/B RW section size to 4MBNikolai Vyssotski
To have enough space in the A/B RW sections, increase those sizes to 4 MByte and decrease the RO section size to 6 MByte to free up the space needed for that. Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib107fd05cfb0ef7de95425abcce6c82b88a9835d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-03-21mb/google/brya/var/banshee: Add WiFi SAR tableFrank Wu
Add WiFi SAR table BUG=b:225285426 TEST=emerge-brya chromeos-config chromeos-config-bsp-private coreboot-private-files-baseboard-brya coreboot chromeos-bootimage and checked SAR table can load by WiFi driver. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I8fa833409bd69e080fda735c89015b9548252190 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-21mb/google/zork/var/dirinboz: Add fw_config probe for ALC5682-VD & VS=
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name and machine_dev depending on the AUDIO_CODEC_SOURCE field of fw_config. Define FW_CONFIG bits 36 - 37 (SSFC bits 4 - 5) for codec selection. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:211672259 BRANCH=firmware-zork-13434.B TEST=ALC5682I-VS audio codec can work Change-Id: Icd4321ec0a284e35511dd4b860a16506f54cf663 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-21mb/google/zork/var/gumboz: Add fw_config probe for ALC5682-VD & VS=
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name and machine_dev depending on the AUDIO_CODEC_SOURCE field of fw_config. Define FW_CONFIG bits 36 - 37 (SSFC bits 4 - 5) for codec selection. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:215292608 BRANCH=firmware-zork-13434.B TEST=ALC5682I-VS audio codec can work Change-Id: I0b0231a3ee9c0dad289ffd50607b3ae6201f56a0 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-21mb/google/brya/vell: Move WWAN devices for vellRobert Chen
This was to merge PCIe ACPI code to WWAN device. Also, RTD3 devices are add to overridetree.cb where WWAN is present for vell. BUG=none BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Change-Id: If27abcf31ed948899bfaecbe8ef494fe8a80609b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-21mb/google/brya: Deselect ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTORSridhar Siricilla
The patch deselects ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTOR Kconfig which updates PMC settings in the IFD for Alder Lake A0 silicon. As Alder Lake A0 is intermediate stepping, and the IFD is locked in the production systems, so the Kconfig is deselected. BUG=b:190588098 BRANCH=firmware-brya-14505.B TEST=Build the coreboot for Gimble Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I81fe7c792dd82d9d547d318ebda55ee4a0f3ac96 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-21mb/google/corsola: Revise power-on sequence of PS8640Rex-BC Chen
Although the panel initializes fine and the fw recovery screen is displayed without issues, the current power-on sequence of the PS8640 violates the spec of the PS8640, which can be confirmed by measuring it with an oscilloscope. The sequence is: - set VDD12 to be 1.2V - set VDD33 to be 3.3V - pull hign PD# - pull down RST# - delay 2ms - pull high RST# - delay more than 50ms (55ms for margin) - pull down RST# - delay more than 50ms (55ms for margin) - pull high RST# This flow will increase 110ms if firmware display is enabled in krabby. For normal booting flow, the firmware will not be enabled, so it will meet boot time requirements of Chrome OS. (Less than 1s.) Datasheet name: PS8640_DS_V1.4_20200210.docx. Chapter: 14. BUG=b:222650141 TEST=show fw display normally in krabby. TEST=result of waveform meets the spec. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7706c56dc7fc13ac84c0d52a6e534bc0988e8fd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-19mb/google/skyrim/devicetree: set PSPP policy to DXIO_PSPP_DISABLEDFelix Held
Right now, the PSPP policy that controls if the PCIe lanes can be dynamically downgraded to a lower speed to save some power needs to be disabled in order for the link training to be successful. Once this feature is working, PSPP will be reenabled. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6ea602596acb8e5ea92076386e80102c3bc757af Reviewed-on: https://review.coreboot.org/c/coreboot/+/62924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-03-19mb/amd/chausie/devicetree: set PSPP policy to DXIO_PSPP_DISABLEDFelix Held
Right now, the PSPP policy that controls if the PCIe lanes can be dynamically downgraded to a lower speed to save some power needs to be disabled in order for the link training to be successful. Once this feature is working, the PSPP policy will be switched to balanced again. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I85a06f322c4ddff25c3a858e2b79c84b36c48932 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-19mb/google/dedede/var/lantis: Add ELAN touchscreen support for LandridRobert Chen
The touchscreen slave address for landrid is 0x10 same as lantis, so we use SSFC to switch touchscreen controller. BUG=b:222976965 TEST=emerge-dedede coreboot Change-Id: I23d3de5e45aa2876c1590a1e09679d652a3f2906 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-18mb/google/guybrush/port_descriptors: use enum values for link speedFelix Held
Use GEN3 from enum dxio_link_speed_cap instead of the number 3. TEST=Timeless build results in identical firmware image for guybrush Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0dddc57e05ec2395ca980bb63320bb9ee5242c29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-18mb/google/brya/nivviks/overridetree: update tcss_aux_ori register nameFelix Held
Commit 215a97ee1c4cd87b266d63e32bf0b379e18fe849 (soc/intel/adl/chip.h: Convert all camel case variables to snake case) converted the camel case used in the parameter name to snake case, but commit bd529e2e200a8fbfd455dd62be0494a2b727b9a5 (mb/google/nissa/var/ nivviks: Add TcssAuxori for nivviks) still used the old names which breaks the upstream build. his patch is intended to be merged via fast-path before the 24h are over to fix the tree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2b9049553889c77bd8c59a2c4564d36d836a4eea Reviewed-on: https://review.coreboot.org/c/coreboot/+/62927 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18mb/google/nissa/var/nivviks: Add TcssAuxori for nivviksUsha P
Enable SBU orientation handling by SoC for both USBC port0 and USBC port1. Nivviks USBC port0 do not have retimer, USBC port1 has redriver, but that do not flip the data lines. Hence we need to set bits for both the USBC ports. BRANCH:None TEST=emerge-nissa coreboot chromeos-bootimage. Flash the image on nivviks board and verified USBC display is working on both the ports in normal and inverted connections. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I219de6092ac9a9c773adbaa99f5a7d6196a2c937 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62731 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18mb/google/brya/var/banshee: Replace amp max98357 with max98360Frank Wu
Based on the latest schematic, replace amp max98357 with max98360. BUG=b:224692387, b:216110896 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Id265a4276c3f8b5553a0e5d7ed824b1d9a520d44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62887 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18mb/google/dedede/var/galtic: update Wifi SAR for for galnatFrank Chu
Add wifi sar for galnat/galnat360 Use SKU ID to load wifi table. Each Project and SKU ID correspond as below galtic (sku id:0x120000) galith (sku id:0x130000) galnat (sku id:0x140000)* gallop (sku id:0x150000) galtic360 (sku id:0x260000) galith360 (sku id:0x270000) galnat360 (sku id:0x2B0000)* BUG=b:222008376 TEST=emerge-dedede coreboot chromeos-bootimage \ coreboot-private-files-baseboard-dedede verify the SAR table is correct in each project Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I868a7416a002732736cabea48ce80548ea75e517 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-18mb/google/brya/var/volmar: Disable thunderboltRen Kuo
Volmar does not support Thunderbolt, therefore disable all of the TBT devices in the devicetree. The volmar fit image had been disabled already, cf. chrome-internal:4459289. BUG=b:2233193 TEST=Build and run on DUT. Change-Id: Ic1bba80707b1d4a97c486e22f79feccf6241865e Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-18mb/google/brya/var/kinox: Reconfigure GPIO settingsDtrain Hsu
Configure GPIOs according to updated schematics. - GPP_A21 from NC to TCP_DP1_CTRLCLK. - GPP_A22 from NC to TCP_DP1_CTRLDATA. - GPP_E22 from DDIA_DP_CTRLCLK to NC. - GPP_E23 from DDIA_DP_CTRLDATA to NC. BUG=b:214025396 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I9d2d73820fbb191b682713e4e351c6375927ddf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-18mb/intel/adlrvp: Set EPP to 45% for all Adl RVP variantsCliff Huang
This sets EPP value to be 45% for all Adl RVP variants. Historically, EPP Ratio has always been 50% (128) on Chrome platforms. But on Intel Alderlake EPP ratio of 45% is recommended for optimal power and performance on Chrome platforms. TEST= Use 'iotools rdmsr [cpu id] 0x774' command and check field 32:24 = 0x73. Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com> Change-Id: If83a2148d596efccd2e50cc82f1afcbfb9ebb935 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2022-03-18mb/google/brya/var/vell: Change AMP driver settingShon Wang
1.Change I2S GPP_Sx (S0-S3) Native PAD Configuration from NF2 to NF4 2.Select CS35l53 AMP driver for Vell variant. Change-Id: I96d49bd1a2ba061c4fd52b450b31d0885f49552c Signed-off-by: Shon.Wang <shon.wang@quanta.corp-partner.google.com> Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-18mb/google/skyrim: Build APCB sources into amdfw when presentKarthikeyan Ramasubramanian
BUG=b:224618411 TEST=util/abuild/abuild -t GOOGLE_SKYRIM with and without APCB Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I71b30a5716f2e0d60d07a0ec29f98609c1f2a8b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-18mb/google/skyrim: Fix I2C voltagesRaul E Rangel
Needed so i2c communication works. BUG=b:224618411 TEST=build skyrim Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8ec7c18cae509b5683cb73153fd6d3747cf9d753 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62874 Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18mb/google/skyrim: Enable tis_plat_irq_statusRaul E Rangel
This will fix: > [INFO ] Probing TPM I2C: tis_plat_irq_status() not implemented, wasting 20ms to wait on Cr50! BUG=b:224618411 TEST=Compile skyrim Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5add694506ad089adcc8961f101bf507bc39a522 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62873 Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17mb/google/brya: Remove mainboard.aslEric Lai
Use C code to generate MS0X entry and provide variant hook. BUG=b:207144468 TEST=check SSDT table has the same entry. Scope (\_SB) { Method (MS0X, 1, Serialized) { If ((Arg0 == One)) { \_SB.PCI0.CTXS (0x148) } Else { \_SB.PCI0.STXS (0x148) } } } Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ic36543e5cbaf8aaa7d933dcf54badc5f40e8ef02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17mb/google/brya: Remove Pcie Generic driver for WWANCliff Huang
This was to merge PCIe ACPI code to WWAN device. But, now use recent _DSD generation changes in FM driver instead. PCie generic driver is not used for WWAN at this time. Also, RTD3 devices are moved to overridetree.cb where WWAN is present. BUG=b:221250331 BRANCH=firmware-brya-14505.B TEST= Check that _DSD is added to WWAN device in SSDT for the variants. Check that RTD3 is added to WWAN device in SSDT for the variants. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: Ia343c7545cf30bdbcd1de19e5eb84049dbb2977f Reviewed-on: https://review.coreboot.org/c/coreboot/+/62330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17mb/google/brya/var/banshee: Update DPTF parametersFrank Wu
Follow thermal team design to update thermal table. BUG=b:223492897 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I5da776e7ae3368ce00cd29ec0ccdb5b7a725ff88 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-17mb/google/dedede/var/galtic: Add fw_config probe for 2nd touchscreenFrank Chu
For galnat platform, support 2nd ELAN touchscreen via SSFC. Define FW_CONFIG bits 39 - 40 (SSFC bits 7-8) for touchscreen controller switch. BUG=b:221002826 TEST=touch screen is functional. Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Id3501205b147c9dc3c96ce8381a3e7492ae8258e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-17mb/google/brya/var/kinox: Modify 15W SOC power control settingDtrain Hsu
Modify 15W SOC default power settings for kinox. - PL2 39W - PL4 100W - Psys_PL2 65W - Psys_imax_ma 5000ma - bj_volts_mv 20000mv BUG=b:213417026, b:222599762 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I2956705f7d26929c7cf2dd4e852fc61b619a83e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62627 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17mb/google/brask/variants/moli: set eMMC pin in bootblockRaihow Shi
1.Assert eMMC enable pin in bootblock 2.Deassert eMMC reset pin in bootblock BUG=b:220821454 Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I924fcdadaae8ed29b50369a55bad00983cf6ba19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17mb/google/nissa/var/nivviks: Set gpio override to board_0Eric Lai
Follow the latest schematic change, gpio will match the baseboard. Return the current table as override. BUG=b:223677877 TEST=audio is functional on board_0. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I91dc2c9c8811d403c60a4b4f3a7c5ed8de4e527e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-03-16mb/hp/snb_ivb_laptops: Move selects from Kconfig.name to KconfigFelix Singer
Move selects from Kconfig.name to Kconfig so that the configuration is in one place and not distributed over two files. Change-Id: I500f6422c1f8975de8b0bcc8b95cba2bcd4ebe27 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-16mb/google/brya/var/kinox: Enable PCIe-eMMC bridgeDtrain Hsu
Enable PCIe-eMMC bridge for Kinox. BUG=b:218786363, b:211176722 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iec34708e5879c47f5339c48fd996eb6d7ef0ee86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-16mb/google/brya/var/kinox: Modify the DPTF/Fan parametersDtrain Hsu
Follow the Thermal_paramters_list-0314.xlsx to modify DPTF/Fan parameters. BUG=b:221180425, b:222020226, b:221182596 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I5f44120430029130d38b89d0eab6bbf205aca929 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-16mb/hp/snb_ivb_laptops: Rename `BOARD_HP_SNB_IVB_LAPTOPS`Felix Singer
Rename `BOARD_HP_SNB_IVB_LAPTOPS` to `BOARD_HP_SNB_IVB_LAPTOPS_COMMON` to indicate and to make it clear that this option serves as base for others. Built HP EliteBook Revolve 810 G1 with BUILD_TIMELESS=1 and also with `INCLUDE_CONFIG_FILE` disabled. coreboot.rom remains identical. Change-Id: Icadeb8a33ae0787d2cd5da460065a2ed15256d64 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-16mb/hp/snb_ivb_laptops/Kconfig{,.name}: Reorder selects alphabeticallyFelix Singer
Built HP EliteBook Revolve 810 G1 with BUILD_TIMELESS=1 and coreboot.rom remains identical. Change-Id: I54367c7c663ad288ccdcbd4e7289546489a68f30 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-16mb/google/brya: set GPP_D0 to GPOMark Hsieh
Based on the schematic carbine_adl-p_dvt_20211104.pdf, the GPP_D0 is directly connected to FP module, Set GPP_D0 to GPO, DUT can flash FP firmware successfully. BUG=b:222188263, b:223906569 TEST=USE="project_gimble emerge-brya coreboot" and run the Fingerprint Firmware Test. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I164ffff6bd3b4058d6e28247eb7c3ed46d3891b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-15soc/intel/tgl: move DIMM_SPD_SIZE from mb to SoC KconfigMichael Niewöhner
All TGL mainboards are setting DIMM_SPD_SIZE to 512. Thus, default to 512 in the SoC Kconfig and drop it from the mainboard Kconfigs. Change-Id: I9fd947b61c984e10bd5fba20b73280b08623a008 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62766 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-15mb/google/guybrush/var/nipperkin: update APU STT settingKevin Chiu
BUG=b:219616787 BRANCH=guybrush TEST=emerge-guybrush coreboot update the thermal setting value by measurement and pass the thermal performance test Change-Id: I3ba3ab990d5362c6f02d2ee5a023f4c5cca7fa45 Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-15mb/google/brya/var/banshee: Add camera privacy settingFrank Wu
Using the GPP_F19 as privacy switch for camera in banshee. BUG=b:223712143, b:216110896 TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I67d65347ceac7152f1951018a633a2e93ee84e14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-15mb/google/brya: Disable C1-state auto demotion for Brya & BraskMAULIK V VAGHELA
C1-state auto demotion feature allows hardware to determine C1-state as per platform policy. Since Brya sets performance policy to balanced from hardware, auto demotion can be disabled without performance impact. Also, disabling this feature results in 110 mW power savings during video playback. Note that C1state Autodemotion feature is not applicable for ADL-P SoC. Hence recommendation is to keep it disabled. BUG=b:221876248 BRANCH=firmware-brya-14505.B TEST=Code compiles and correct value of c1-state auto demotion is passed to FSP. Also power and performance impact has been measure by respective teams. Change-Id: I41eea916cdfe4a86e4d263e3191f5cb40fa33a90 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-03-15soc/intel/adl/chip.h: Convert all camel case variables to snake caseMAULIK V VAGHELA
coreboot chip.h files mainly contains variable which allows board to fill platform configuration through devicetree. Since many of this configuration involves FSP UPDs, variable names were in camel case which aligned with UPD naming convention. By default coreboot follow snake case variable naming, so cleaning up file to align all variable names as per coreboot convention. During renaming process, this patch also removes unused variables listed below: -> SataEnable // Checked in SoC code based on PCI dev enabled status -> ITbtConnectTopologyTimeoutInMs // SoC always passes 0, so not used Note: Since separating out changes into smaller CL might break the compilation for the patch set, this is being pushed as a single big CL. BUG=None BRANCH=firmware-brya-14505.B TEST=All boards using ADL SoC compiles with the CL. Change-Id: Ieda567a89ec9287e3d988d489f3b3769dffcf9e0 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-03-15{mb, soc}: Move mrc_cache invalidating logic into `memory` common codeSubrata Banik
Commit hash b8b40964 ( mb, soc: Add the SPD_CACHE_ENABLE) introduced per mainboard logic to invalidate the mrc_cache. This patch moves mrc_cache invalidating logic into IA common code and cleans up the code to remove unused argument `dimms_changed` from SoC and mainboard directory. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=Able to build and boot redrix without any visible failure/errors. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6f18e18adc6572571871dd6da1698186e4e3d671 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-15{mb, soc}: Change `memcfg_init()` and `variant_memory_init()` prototypeSubrata Banik
This patch modifies `memcfg_init` and `variant_memory_init`functions argument from FSP_M_CONFIG to FSPM_UPD. This change in `memcfg_init()` argument will help to update the architectural FSP-M UPDs from common code blocks rather than going into SoC and/or mainboard implementation. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=Able to build and boot redrix without any visible failure/errors. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3002dd5c2f3703de41f38512976296f63e54d0c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-14mb/google/herobrine: consolidate hoglin/herobrine QUP initsShelley Chen
Hoglin and Herobrine (proto1) should share majority of GPIOs. Conslidating the QUP initializations in mainboard. Also, putting fingerprint init in a conditional as not all devices will have an FP sensor. BUG=b:182963902,b:223826899 BRANCH=None TEST=booted BIOS on hoglin and check for i2c errors in dmesg Change-Id: I48ce42760f2c75f04619b967a05909d2b3f28e2c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-14mb/google/trogdor: Add variant GelarshieMars Chen
New board introduced to trogdor family. BUG=b:223101874 BRANCH=none TEST=make Signed-off-by: Mars Chen <chenxiangrui@huaqin.corp-partner.google.com> Change-Id: Ie83df3c753d0863841430fe62805250ef8efeae9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-14mb/google/brya/var/primus{4es}: add eMMC enable pin in ramstageCasper Chang
Currently the BayHub eMMC enable pin is using the default configuration from the baseboard, which leads to RTD3 not being able to control the GPIO when exiting and entering suspend. To fix this, program the GPIO in the ramstage GPIO table. BUG=b:222436260 TEST=USE="project_primus" emerge-brya coreboot chromeos-bootimage scope enable pin while performing suspend stress and enable pin works as expected. test suspend stress 1000 cycles passed on primus. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I1b6f164cc326bd368addb1e143ad2cbd449bb08d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14mb/starlabs/labtop: Pull SSD Pin to low when entering S3Sean Rhodes
Pull GPP_D16 to low when suspending, otherwise it will remain active and use power. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2cbe7caf66e8d8c27414aca3b74416c2b8115ea1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-14mb/siemens/mc_ehl: Increase SPD buffer size to 512 bytesWerner Zeh
DDR4 SPD data needs to be 512 byte to comply with the spec. Though there is no vital timing data used beyond 256 byte there are some part information which will be used to show the part info in the coreboot log. If the buffer is too small this log shows garbage. This patch increases the SPD buffer size from 256 byte to 512 to avoid side effects. Change-Id: I5b88df7818cfd62b3579d69f9f5bb14880f49c8c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-14mb/google/brya/var/kinox: update overridetreeDtrain Hsu
1. Update override devicetree based on schematics. 2. ALC5682I-VS is for audio codec. BUG=b:218786363, b:214025396, b:212183045 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I08a1c2f784175b208ccdc562668041f432618dfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/62553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14mb/google/guybrush: Fix building with VBOOT_STARTS_IN_BOOTBLOCKRaul E Rangel
The verstage.c file contains PSP verstage specific code. We don't need it when using x86 verstage. BUG=b:193050286 TEST=Build and boot guybrush with x86 verstage Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6dc928cdce0c922bb18f4479b993c89dff106070 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62740 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-14mb/google/brya: Set EPP to 45% for all Brya variantsCliff Huang
This sets EPP value to be 45% for all Brya variants. Historically, EPP Ratio has always been 50% (128) on Chrome platforms. But on Intel Alderlake EPP ratio of 45% is recommended for optimal power and performance on Chrome platforms. BUG=b:219785001 BRANCH=firmware-brya-14505.B TEST= Use 'iotools rdmsr [cpu id] 0x774' command and check field 32:24 = 0x73. Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com> Change-Id: I973cfec72a0be24c56c4cd3283d2fe6e18400d02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14mb/google/dedede: Update DPTF settingTeddy Shih
Update PL1, PL2, and temperature sensor values from thermal team, as well as, we remove unused temperature sensors according to baseboard/devicetree.cb and mainboard schematic. After we check DTT setting, the thermal and performance test pass. BRANCH=dedede BUG=b:204229229 TEST=on beadrix, run following commands: localhost /tmp # cat /sys/class/thermal/thermal_zone*/type x86_pkg_temp INT3400 Thermal TSR0 TSR1 TCPU localhost /tmp # cat /sys/class/thermal/thermal_zone*/temp 45000 20000 32800 32800 39000 Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: Ibc59c4aa431f600158e744f5bbdc6d59a07a1ef3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62729 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-14mb/googe/skyrim/baseboard/devicetree: update USB port device ID on xhci2Felix Held
The one USB2 port on the XHCI2 controller should have the port ID 2.0, since it's the first USB2 port on that XHCI controller. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4a370132960939bccec4eb69a6590d0880b04137 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62713 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-14mb/amd/chausie/devicetree: enable GFX HDA, ACP and XHCI2 devicesFelix Held
GFX HDA is the audio controller that provides audio output via the external display connection, ACP is the audio coporcessor for the on- board audio codec and XHCI2 is the third XHCI controller that provides one USB 2.0 port. All those devices are used, so enable them in the board's devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I186797a832470eb17752e06aa2fcc0b5c9db0398 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62571 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-14mb/google/nissa/var/nivviks: Hook up SD host controller GL9750Eric Lai
Select GL9750 driver and add power sequence according to datasheet: GL9750S-OIY04 rev1.22. BUG=b:223304292 TEST=check GL9750 can get enumerated by kernel 5.15. 01:00.0 SD Host controller: Genesys Logic, Inc Device 9750 (rev 01) Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ib6d461a56f6aeba30994daafe8993c36df4b309d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-03-14mb/google/nissa/var/nivviks: Enable pen garageEric Lai
Enable pen garage. Pen detect is active low. And wake system when eject. BUG=b:223476974 TEST=evtest work as expected. Input driver version is 1.0.1 Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100 Input device name: "PRP0001:00" Supported events: Event type 0 (EV_SYN) Event type 5 (EV_SW) Event code 15 (SW_PEN_INSERTED) state 0 Properties: Testing ... (interrupt to exit) Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1 Event: -------------- SYN_REPORT ------------ Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I2f676301c3372a4760853ce9c10b75f94e22bbcd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-10mb/google/skyrim: Configure WLANJon Murphy
Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used for WLAN. Mappping derived from Skyrim schematic. BUG=b:214412172 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I16e35b443f741d366589fefb7fd21863369d1ec2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-10mb/google/skyrim:Update GPIO 32Jon Murphy
GPIO 32 was not allocated correctly, updating to reflect the native function use of the pin BUG=b:214412172 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Idadd2a802b3244eba8ee83f80d8f10baebe4ca40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62717 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-10mb/google/herobrine: Add trackpad initializationRavi Kumar Bokka
Initialize trackpad on Qualcomm reference boards BUG=b:182963902,b:223826899 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I93e866d92cf37887a98de88b4b2d768562515670 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62226 Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-10mb/google/guybrush: Enable DEBUG_SMI for non-serial firmwareRaul E Rangel
In order to copy the PSP verstage logs into x86 cbmem, we need to enable DEBUG_SMI. This will include the CBMEM console code in SMM. I only enable DEBUG_SMI when UART is disabled because SMM doesn't currently save/restore the UART registers. This will result in clearing the interrupt enable bits and makes it so you can no longer use the TTY. BUG=b:221231786, b:217968734 BRANCH=guybrush TEST=Build serial and non serial firmware and verify DEBUG_SMI is set correctly. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I85a7933e8eb49ff920d00e43a494aaeab555ef3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-10mb/google/guybrush/var/nipperkin: turn off WWAN DPRKevin Chiu
Sets GPIO 42 to high to turn off WWAN DPR BUG=b:216735313 BRANCH=guybrush TEST=emerge-guybrush coreboot make sure GPIO42 is high Change-Id: Id0fcf27f086f98b2d42b47c8a871252b52d204ba Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-10mb/google/guybrush/var/nipperkin: Update privacy GPIO to Graphics DRMKarthikeyan Ramasubramanian
GPIO_18 is used for LCD_PRIVACY_SCREEN feature starting board phase 2. But it is programmed incorrectly in the concerned ACPI device. Pass the correct GPIO. BUG=b:204401306 TEST=Build and boot to OS in Nipperkin. Ensure that the ACPI object contains the right GPIO. Ensure that the screen visibility gets updated by pressing the privacy screen button. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I99d40b49f4e97063f1ec2e15ac3da21f700a93eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-10mb/google/brask/variants/moli: Change DDR4 Interleave to Non-Interleavezoey wu
The Brask DDR4 setting are interleave, due to Moli PCB layer limited and the routing need to smooth, we will use non-interleave for Moli DDR4. BUG=b:219831754 Signed-off-by: zoey wu <zoey_wu@wistron.corp-partner.google.com> Change-Id: Iab153f16a3b729e7fa9daaa3dbfbccc70e6d789d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10mb/google/brask/variants/moli: Reduce PSysMax to 11 ARaihow Shi
Decrease PSysMax from 13.52 A to 11 A for Moli variant according to its power circuitry, implying Psys_Pmax = 11A * 19.5V = 214.5W BUG=b:215258941 Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I61f4813f3527123a590d80b4a6e49d76ebb71c99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10mb/starlabs/labtop: Remove unnecessary return value from MWAKSean Rhodes
Don't return 0x00 when running MWAK as it is not needed. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic62eab8ae5319aff37c61fc29d701d9a36ada919 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 06:29:48 +0000