| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I7d9cbbd1aeadecc1a4c91816df303c6cb4817fe3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7034
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Icc2e7b66b3ff5f70b219a3e67494ce3df055c9d5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7033
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I3847eb1524a5a816cd4885a31d703b410804c1f0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7032
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Icc663c28713f2d872bfeb1749303ce92db953bf5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7031
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This was copied from P2B-F without doing any modification. It never worked.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Change-Id: I2c90688c8ff8c3bd272d24f059e8e1bfb86e2b4a
Reviewed-on: http://review.coreboot.org/7555
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
The suggested IRQs 10 and 11 would conflict with PCI IRQ assignment
(10 for most interrupts on this board). Suggest IRQ 6 instead.
It's actually a noop since the code is commented out.
Change-Id: I0fdd8e2091d3dc79cfb1809a9ea5e1e841ca598a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7476
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
GPIOs 32 and 64 used the wrong code path.
Change-Id: I1d293cf38844b477cac67bc19ce5e5c92a6e93ca
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7577
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
On those chipsets the pins are just a legacy concept. Real interrupts are
messages on corresponding busses or some internal logic of chipset.
Hence interrupt routing isn't anymore board-specific (dependent on layout) but
depends only on configuration.
Rather than attempting to sync real config, ACPI and legacy descriptors, just
use the same interrupt routing per chipset covering all possible devices.
The only part which remains board-specific are LPC and PCI interrupts.
Interrupt balancing may suffer from such merge but:
a) Doesn't seem to be the case of this map on current systems
b) Almost all OS use MSI nowadays bypassing this stuff completely
c) If we want a good balancing we need to take into account that e.g.
wlan card may be placed in a different slot and so would require complicated
balancing on runtime. It's difficult to maintain with almost no benefit.
Change-Id: I9f63d1d338c5587ebac7a52093e5b924f6e5ca2d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7130
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Not sure if they ever worked.
Change-Id: I77cf090763aa7ac46480a5a9583985b10b02a267
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7551
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This was copied from T60 which in turn copied from P2B-F without doing
any modification. It never worked.
Change-Id: I23fc8a7775df410d0f9735d1461dd9b80e54d076
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7554
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I8b4c36adaa7ea791ae1a8f7c0d059b9201b08f94
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7332
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I9ce2333e1ea527843f83d411dea2a669263156c2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7027
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This interface is common with AMD PI implementations.
Change-Id: Ifabfce97db749e04aa19e53f62216be78158b282
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7150
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
To backport features introduced with recent Chromebooks and/or Intel
boards in general, heavy work on the AMD AGESA platform infrastructure
is required. With the AGESA PI available in binary form only, community
members have little means to verify, debug and develop for the said
platforms.
Thus it makes sense to fork the existing agesawrapper interfaces, to give
AMD PI platforms a clean and independent sandbox. New directory layout
reflects the separation already taken place under 3rdparty/ and vendorcode/.
Change-Id: Ia730f0e45e7c1bdfc0c91e95eb6729a77773e2b9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7388
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
To backport features introduced with recent Chromebooks and/or Intel
boards in general, heavy work on the AMD AGESA platform infrastructure
is required. With the AGESA PI available in binary form only, community
members have little means to verify, debug and develop for the said
platforms.
Thus it makes sense to fork the existing agesawrapper interfaces, to give
AMD PI platforms a clean and independent sandbox. New directory layout
reflects the separation already taken place under 3rdparty/ and vendorcode/.
Change-Id: Ib60861266f8a70666617dde811663f2d5891a9e0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7149
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
Expose one CONFIG_ variable instead of seven to C preprocessor.
Change-Id: Ib815127561d320a5e8f8e6ef168933d81809521e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7494
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
As build.h is an auto-generated file it was necessary to add it as
an explicit prerequisite in the Makefiles. When this was forgotten
abuild would sometimes fail with following error:
fatal error: build.h: No such file or directory
Fix this error by compiling version.c into all stages.
Change-Id: I342f341077cc7496aed279b00baaa957aa2af0db
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7510
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Sync up these 'Porting.h' headers to include fixes from each
family on botched-up typedef's for primitive data types.
Fix corresponding breakage introduced by typecasts in
mainboards.
Change-Id: I003b155cc6c860f6b0cd75667083634a04814473
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7512
Tested-by: build bot (Jenkins)
|
|
Fix warning thrown by Clang due to missing prototype for main
entry point function in -ffreestanding. main() is as any other
function in freestanding and so a prototype is strictly needed.
Change-Id: Ic27e0f93065b1aa85d3979db61b5e2ff0dd2a310
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7518
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Fix warning thrown by Clang due to missing prototype for main
entry point function in -ffreestanding. main() is as any other
function in freestanding and so a prototype is strictly needed.
Change-Id: Icb29ced0306d5089049a35b1d8862f86a555ff1f
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7517
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The F2A85-M LE has less DRAM slots and needs different settings.
Additionally, the audio codec verb table is different.
Change-Id: I0e13c91fc924f4f9eac534fd13d57830654dd0aa
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: http://review.coreboot.org/7356
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
The ASUS F2A85-M has a keyboard controller, serial and parallel port
and thus is not legacy free at all.
Setting LEGACY_FREE causes some early bootup serial debug messages
to be lost.
Change-Id: Ibba38826e2f863c6e490e52bd5854e5dc0b6a357
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: http://review.coreboot.org/7480
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
The A85 IMC is unused on this board, disable the build option.
The original ASUS BIOS image does not contain any IMC firmware.
Change-Id: I93fd50f2d4a85811ed43722e90f38864610f1cda
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: http://review.coreboot.org/7385
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
This implementation is more compact, unified and works with windows as well.
Tested under windows and under Debian GNU/Linux.
Change-Id: I585dec12e17e22d829baa3f2dc7aecc174f9d3b5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7296
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ifdfb78e39280af5017034b57e63c33b461b9b531
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7474
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The entries in chip.h are used to set the UPD values. These had
originally been shortened and did not match the names of the structure
entries in vendorcode/intel/fsp/baytrail/include/fspvpd.h
This patch aligns the names.
- Update names in chip.h.
- Update names in devictree registers for bayley bay and minnow max.
- Update names in chipset_fsp_util.c
Change-Id: I8d7e34195cec2e63802d7e07e5aed71735556936
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7486
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I70e3f2198292bcaffd08beb1d56807428416af5b
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7390
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I7c823550bf77b03907fa8940a8800658d66d6786
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7183
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I83317e9c4d81e7e6cae4132eb95718c781d64a12
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7473
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ifb5ea81ccfdedd5ea617d6b3dafc2f169d4d9287
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7467
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I76577cc3739f23d392d077db5a5edfdbdbe8fb1e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7466
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
We already have these implemented in 'lib/debug.c'. Will fix
'.c' includes in follow ups.
Change-Id: I1586d8864db7f93515214ef9a4458ebc618bf61c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7316
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
There are no reasons to not load ramstage @ 0x100000.
Boards with HAVE_ACPI_RESUME enabled have performance penalty in using
excessive RAMTOP. For these boards, this change releases 11 MiB of RAM from CBMEM allocation to OS.
Change-Id: Ib71995aba5e9332d0ec1626b3eb3b4ef6a506d1c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7094
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I4d830d988b74f2403ef8979cbafcaee3018fea62
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7423
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
This is a companion patch of CL:191692 "Tegra: Fix Beep".
TEST=Booted Big. Verified beeps at dev screen. Measured frequency by smartphone.
Built Blaze.
BUG=chrome-os-partner:26609
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I9ba47d06202e9968a908c4a15cfbeac4bfe2c20c
Original-Reviewed-on: https://chromium-review.googlesource.com/192063
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 87a0f166e493b98d2a4e597f90ede090161fffdb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id3b819745b0753862e8cfa43e7fa1ed4b27eb462
Reviewed-on: http://review.coreboot.org/7462
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The TPM now works correctly with the I2C bus running at 400 KHz. Running it at
that frequency saves some boot time.
CQ-DEPEND=CL:191634
CQ-DEPEND=CL:191793
BUG=chrome-os-partner:27220
TEST=Built and booted on nyan with and without EFS.
BRANCH=None
Original-Change-Id: I157308c2745342dc1ada4499433004c7ce1c6435
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191813
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 39a740d488d8f33ee698805bc2a8438263162cc8)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I02978407e20cc9d526545157a3a3304729a91010
Reviewed-on: http://review.coreboot.org/7461
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This is required to send 1.5Mhz clock to Max98090 and get a right beep sound.
BUG=chrome-os-partner:26609
TEST=Booted Nyan. Verified Max98090 can beep. Measured frequency by smartphone.
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Ie3ff6df6759cb23d78dc05069553ddb4eb8e508a
Original-Reviewed-on: https://chromium-review.googlesource.com/191791
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 2f75a147f26ac334fff174a1f9618a2bbe290fe9)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If8c7871dc8202f98ccf23fb0afad1e7745fbf174
Reviewed-on: http://review.coreboot.org/7457
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
To enable EFS, we need to be able to talk to the TPM and the EC before the RAM
stage starts. That means we need to set up the pins for those busses, clock
those controllers and take them out of reset.
BUG=None
TEST=Built for nyan, nyan_big, and nyan_blaze. Booted on nyan. With other
changes which implement EFS on nyan, saw EC and TPM communication work when in
vboot.
BRANCH=None
Original-Change-Id: Ic65d69fd42beec5f03084c8cb970927c2f69dfb6
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191390
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d9c176536b1e2eba47fdca90dd3346052573223e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id3117bd0c36f8b92d85cc0cefde2bed9d8de90d0
Reviewed-on: http://review.coreboot.org/7456
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The existing display init functions were translated from a script. The new
code will play the same functions but are cleaner and readable and easier to
be ported to new panel.
BUG=none
TEST=build nyan and boot up kernel.
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: Ic9983e57684a03e206efe3731968ec62905f4ee8
Original-Reviewed-on: https://chromium-review.googlesource.com/189518
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 5998f991ea3069d603443b93c2ebdcdcd04af961)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Squashed to pass abuild
nyan: Fix the build for big and blaze.
The display code for the tegra124 was cleaned up recently, but only the nyan
device tree was updated to match the new code, not big's or blaze's. This
change copies nyan's device tree over to those other two boards which will get
them building again. The settings may not be correct, but they'll be no less
correct than they were before. I also updated the copyright date for nyan.
BUG=none
TEST=Built for nyan, nyan_big, nyan_blaze. Booted on nyan_big and verified the
panel wasn't damaged by the new display code or settings.
BRANCH=None
Original-Change-Id: I75055a01f9402b3a9de9a787a9d3e737d25bb515
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191364
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ea235f23df31b4ca8006dcdf3628eed096e062b9)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icdad74bf2d013c3677e1a3373b8f89fad99f616e
Reviewed-on: http://review.coreboot.org/7454
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The nyan_blaze board will have different BCT .inc files, to be
added/updated later. GPIOs and some devicetree stuff may also differ.
BUG=None
TEST=Built nyan, nyan_big and nyan_blaze.
BRANCH=None
Original-Change-Id: I8b16fc71346cf973983aa046096b79cb83ad4bb6
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/190721
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit bea753131e2247a90cc5359fa5f603026d66c7ce)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I435ae78da2f6c4f1a78fea8300b6285e52272535
Reviewed-on: http://review.coreboot.org/7453
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The ARM configuration files have been changed that we need more settings to run
Coreboot on qemu-v7.
Also fixed the incorrect Makefile settings that caused armv7 to try building
with armv8 cache.
BRANCH=none
BUG=none
TEST=make menuconfig # select qemu-armv7
make # pass
qemu... # successfully boots to ramstage.
Original-Change-Id: I4040e86ad1ff6e8ebd07cfe387c3f5a0e8941800
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/186080
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@google.com>
(cherry picked from commit f2fab7383ee5352dab2d5f2b8a7d2d321d5944bc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ibe18a1a87f036df148393f8dfc6a6d92dba4ac5c
Reviewed-on: http://review.coreboot.org/7421
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Switching unused pin to GPIO to avoid SPI1 conflicting.
BUG=chrome-os-partner:26701
BRANCH=none
TEST=Built and boot on Nyan
Original-Change-Id: I7de5b8d015f6d02baadd41b1b272dfc49d17c376
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/189970
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit edf12f441adb2395fe2718bed98d79eb3b128f6b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I562b58ba02825b16d374d9f0328f6c75431edc63
Reviewed-on: http://review.coreboot.org/7420
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The PMIC setup code was unconditionally waiting for 10ms after each register
write. It might be possible for there to be an excess of current from lots of
rails switching around at the same time, but we can avoid that with a much
shorter delay in a few strategic places.
This change also moves the write to LDO3 to just under SD1 because LDO3 should
track SD1.
The duration and position for the delays and moving LDO3 were provided by Dan
Coggin at nvidia.
BUG=chrome-os-partner:25467
TEST=Built and booted on nyan rev1. Measured a 230 ms decrease in boot time.
BRANCH=None
Original-Change-Id: I14805bf1b6242bdd0b286f37ae7d635c03909677
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/189016
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Daniel Coggin <dcoggin@nvidia.com>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 06c4d346deeb47809cd88655a9fa6712ceef9491)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3ce0bdeb4ee60499f6c192fe0803a4cab3d7a8af
Reviewed-on: http://review.coreboot.org/7419
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
These had been set to something fairly random which results in a very slow
clock on the bus itself. The new settings take into consideration the speed
the devices on the bus can run at. The TPM can't seem to handle speeds above
40KHz, but some documentation suggests that it should be able to handle up to
at least 100KHz.
BUG=chrome-os-partner:25467
TEST=Built and booted on nyan rev1. Built for big.
BRANCH=None
Original-Change-Id: Iee98957c7e492c7dd08b071aeef3cce75c4a9e56
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/189015
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit afca97a29aeb99d3899b713d0e57a3b3214f0d96)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iab0c50b2119ac322252564354c90b5cb2d255c97
Reviewed-on: http://review.coreboot.org/7418
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
When using LPAE, the address space is split to 2MB blocks. This change makes
the space reserved for DMA consistent with the block size.
TEST=Booted nyan with and without LPAE. Built nyan_big.
BUG=None
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I75c77484f6ca9f23b583ef651956d0265a9b4474
Original-Reviewed-on: https://chromium-review.googlesource.com/188571
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 16a40a48c2e3fc131a348d5e7d377d26f4b20aaf)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib79c9491dc504d28f811bbf0d91cffd292f5eb86
Reviewed-on: http://review.coreboot.org/7413
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This indirectly selects an appropriate PLLX frequency so the main CPUs run as
fast as they can but not faster.
BUG=chrome-os-partner:25467
TEST=Booted on nyan rev1.
BRANCH=None
Original-Change-Id: Ibe61f5e35246b272771debf4fdf90c79b21eb5d0
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/188603
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 947ecbce3cb6e4d7ab07d3ffd5b4694ca6270cde)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9163ddea7f246ae7207a8a715ebae2c9627a7e37
Reviewed-on: http://review.coreboot.org/7410
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
BUG=none
BRANCH=nyan
TEST=built and booted coreboot on my Nyan-rev1, browsed, ran Youtube vids,
WebGL experiments, etc. Everything seemed OK.
Original-Change-Id: I877680c9329ed96a0b602f0690acaa12079786d7
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/188550
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit b6ca59e9db26f7422fa43ade889c921257a36851)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If166938f241e2a4a8670bfce2df6591b4b71ff67
Reviewed-on: http://review.coreboot.org/7408
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The SRAM is very likely faster than going all the way out to DRAM for data,
but I don't think it's part of the cores themselves and won't be as fast as
the L1 caches. Enabling caching for this region reduces the time it takes to
get to the payload by about 75% when serial output is disabled and the main
part of display init is commented out.
BUG=chrome-os-partner:25467
TEST=Built and booted on nyan.
BRANCH=None
Original-Change-Id: I7ff26dea9d50e7d9a76e598e5654488481286b35
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/188459
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ac8b9b30490d511ca1b207af6845d50e08ac130f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If79dcd1b116f30b778788ba4fd45d362ff5d8e6e
Reviewed-on: http://review.coreboot.org/7407
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Replace sdram entry 1 with valid configurations since nyan 4GB board uses
RAM_CODE 1.
BUG=none
TEST=Flash and boot new image.bin. Console shows "RAMCODE=1" and
"Total SDRAM (MB): 4096"
BRANCH=none
Original-Change-Id: Ia872bd7849f1b58075e1f97bf300e081293cb0d4
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/187450
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit f19e2ea3dd4d314b7540c7cf9a11d7af289d24d0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4914c3811b13c8cee0577101bc0c8ee32a0a5b81
Reviewed-on: http://review.coreboot.org/7406
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
When setting up caching on nyan and big, we would set the region after DRAM to
the end of the address space as uncachable. DRAM may actually extend beyond
the end of the address space, so that may result in address aliasing or other
problems. This change adds a check to make sure there's actually space there.
BUG=None
TEST=Built for big.
BRANCH=None
Original-Change-Id: Ic0a98550222f9dfc0aeafd67a2dd1c0c8f4ece44
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/186769
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 1866a4d2a001beb97779b611b8b69c63175048f4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If1ca8b5bd4efab8962e03c0d9eaa70c0327ea6b5
Reviewed-on: http://review.coreboot.org/7405
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This patch brings in ipq806x source files from the vendor's u-boot
tree as it was published in the 'cs_banana' release.
The following files are being copied:
arch/arm/cpu/armv7/ipq/clock.c => src/soc/qualcomm/ipq806x/clock.c
arch/arm/cpu/armv7/ipq/gpio.c => src/soc/qualcomm/ipq806x/gpio.c
arch/arm/cpu/armv7/ipq/timer.c => src/soc/qualcomm/ipq806x/timer.c
arch/arm/include/asm/arch-ipq806x/clock.h => src/soc/qualcomm/ipq806x/clock.h
arch/arm/include/asm/arch-ipq806x/gpio.h => src/soc/qualcomm/ipq806x/gpio.h
arch/arm/include/asm/arch-ipq806x/gsbi.h => src/soc/qualcomm/ipq806x/gsbi.h
arch/arm/include/asm/arch-ipq806x/iomap.h => src/soc/qualcomm/ipq806x/iomap.h
arch/arm/include/asm/arch-ipq806x/timer.h src/soc/qualcomm/ipq806x/timer.h
arch/arm/include/asm/arch-ipq806x/uart.h => src/soc/qualcomm/ipq806x/uart.h
board/qcom/ipq806x_cdp/ipq806x_cdp.c => src/mainboard/google/storm/cdp.c
board/qcom/ipq806x_cdp/ipq806x_cdp.h => src/soc/qualcomm/ipq8064/cdp.h
drivers/serial/ipq806x_uart.c => src/console/ipq806x_console.c
Note that local timer.c gets overwritten with the original version. To
prevent a build breakage some shortly to be reverted modifications had
to be made to src/soc/qualcomm/ipq806x/Makefile.inc and
src/soc/qualcomm/ipq806x/cbfs.c.
BRANCH=none
BUG=chrome-os-partner:27784
TEST='emerge-storm coreboot' still succeeds
Original-Change-Id: I3f50bfbec2e18a3b5d2c640cff353a26f88c98c1
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/193722
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 3c9c2ede7e97e330cad2c2f3e557cc9bcdaecdcc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia7bc66cecfc16f1dd4a9f3cb9840cbe91878adf4
Reviewed-on: http://review.coreboot.org/7263
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We want the coreboot build produce an image which can be run on the
target, even if the remaining parts of the bootprom (recovery path,
read-write stages, gbb, etc.) are not available yet.
This is achieved by including the Qualcomm SBLs blob in the bootblock.
CQ-DEPEND=CL:193518
BRANCH=None
BUG=chrome-os-partner:27784
TEST=manual
. run the following commands inside chroot to confirm expected image
layout (no actual code is executed on the target yet):
$ emerge-storm coreboot
$ \od -Ax -t x1 -v /build/storm/firmware/coreboot.rom 2>/dev/null | head -1
000000 d1 dc 4b 84 34 10 d7 73 15 00 00 00 ff ff ff ff
$ \od -Ax -t x1 -v /build/storm/firmware/coreboot.rom | grep 220000
220000 05 00 00 00 03 00 00 00 00 00 00 00 00 00 01 2a
Original-Change-Id: I10e8b81c7bd90e4550a027573ad3a26c38c3808a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/193540
(cherry picked from commit 64e193974ee448f78e0a5775a440094901590afb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Idbdbeb9d229eff94a7a94af5dc4844a295458200
Reviewed-on: http://review.coreboot.org/7262
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Repurpose config->pwm to mean the particular PWM device (we use PWM1 on
nyan), and add code to program the PWM device.
BUG=none
TEST=emerge-nyan chromeos-coreboot-nyan, regenerate bootimage, and boot.
See that the backlight comes up in the bootloader, and brightness can be
adjusted via pwm_bl driver in the kernel.
Original-Change-Id: I2db047e5ef23c0e8fb66dd05ad6339d60918d493
Original-Signed-off-by: Andrew Chew <achew@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185772
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
(cherry picked from commit 0dee98dd0c8510ecd630b5c6cb9ea49724dc8b55)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie53610f3afa30b2d8f484685fb0e8c0b12cd8241
Reviewed-on: http://review.coreboot.org/7402
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The generic tegra124 code will use one of the PWMs to drive the backlight of
the display, but the PWM clock was enabled only for nyan. This change enables
it for big as well.
BUG=none
TEST=Built for Big
BRANCH=None
Original-Change-Id: I5171da7c41f4b4db931563ada3e8e4ebf74ec3d9
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/186767
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 687f3771fb3e6b340a818fa7594b3ac0630fdeaf)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ifd14a22a98e7fe273ec28c460b928b8a83c84b66
Reviewed-on: http://review.coreboot.org/7404
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Configure pin H1 for PWM1, and enable the PWM clock.
BUG=none
TEST=emerge-nyan chromeos-coreboot-nyan
Original-Change-Id: I2f91ebd4666bd227686c08cedf3c1aa7abbe8215
Original-Signed-off-by: Andrew Chew <achew@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185770
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
(cherry picked from commit 069636d9299f64dd64466d45d2297593b37df4f2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic41515842fb883f44f228c77b4cd266e16124d99
Reviewed-on: http://review.coreboot.org/7400
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
We'd been putting some data structures like the framebuffer and the cbmem at
the end of memory, but that may not actually be addressable as identity mapped
memory. This change clamps the addresses those structures are placed at so
they stay below 4GB.
BUG=None
TEST=Booted on nyan. Went into recovery mode and verified that there was a
recovery screen. Forced memory size to be 4GB and verified that the recovery
screen still shows up.
BRANCH=None
Original-Change-Id: I9e6b28212c113107d4f480b3dd846dd2349b3a91
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185571
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 63ea1274a838dc739d302d7551f1db42034c5bd0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I970c1285270cb648bc67fa114d44c0841eab1615
Reviewed-on: http://review.coreboot.org/7397
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
If an asm blob isn't marked as volatile, gcc is free to throw it out if it
doesn't think it produces any values that are actually used. To prevent that
from happening, add volatile to some asm blobs in the nyan romstage code.
BUG=None
TEST=Booted on nyan rev1.
BRANCH=None
Original-Change-Id: I819e068e738e94ea749fcb72bba2eee080e1dfb1
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185610
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 76c09581d6ca4dc6c2f9048f599822939f439d11)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0b32197abf0ddc5f454f9c2415a65d98c60ca48b
Reviewed-on: http://review.coreboot.org/7396
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
The hudson handling alluded to in the original comment was implemented in
commit ea90963666af1ba49d524c46c9d3257f9438e6c4, use it to disable the
SD controller so it doesn't show up in lspci.
Change-Id: Ib2ba79a11af06c6765dcad4070232a8a7c6d2751
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: http://review.coreboot.org/7383
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
The "Bus 0, Dev 21 PCIE Bridge" entry doesn't match the DSDT from my
BIOS. It looks like this entry was erroneously copied from the entry
for "Bus 0, Dev 20" without rotating the IRQ numbers.
The other entries match my ASUS BIOS and the usual rotation pattern.
Change-Id: I7401c3daaf0da78ba631791947e5a6bb045fc075
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: http://review.coreboot.org/7384
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
Correctly align option (whitespace off-by-one).
Change-Id: I606861c5a9f748a17965b75c6d9a8e0f5e4262ce
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: http://review.coreboot.org/7382
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
This patch changes several cache-related pieces to be cleaner, faster or
more correct. The largest point is removing the old
arm_invalidate_caches() function and surrounding bootblock code to
initialize SCTLR and replace it with an all-assembly function that takes
care of cache and SCTLR initialization to bring the system to a known
state. It runs without stack and before coreboot makes any write
accesses to be as compatible as possible with whatever state the system
was left in by preceeding code. This also finally fixes the dreaded
icache bug that wasted hundreds of milliseconds during boot.
Old-Change-Id: I7bb4995af8184f6383f8e3b1b870b0662bde8bd4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/183890
(cherry picked from commit 07a35925dc957919bf88dfc90515971a36e81b97)
nyan_big: apply cache-related changes from nyan
This applies the same changes from 07a3592 that were applied to nyan.
Old-Change-Id: Idcbe85436d7a2f65fcd751954012eb5f4bec0b6c
Reviewed-on: https://chromium-review.googlesource.com/184551
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4af27f02614da41c611aee2c6d175b1b948428ea)
Squashed the followup patch for nyan_big into the original patch.
Change-Id: Id14aef7846355ea2da496e55da227b635aca409e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
(cherry picked from commit 4cbf25f8eca3a12bbfec5b015953c0fc2b69c877)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/6993
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3e9b7e0e5558a6942067dcea04b83fe3bccbbaf9
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7362
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I00c2c725de5b982a5e4f584b77b09017a5bc0a72
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7062
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Idc3522807b17e56bdaf8f04b4bd68c6ed9777363
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7110
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ic8b2204a6d08d63ac7f05836bf1424f1ca6ee50e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7046
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ibb4dcc4356876f6385e79c10d8296fb680937827
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7201
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I04ed600796c55f5af4f0a07687f676e6484a9830
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7200
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If6cb99469f56fff8f88b294b625f0a5205ec540b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7238
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
cpu/intel/romstage.h is needed so the the main() has a
prototype in freestanding.
Change-Id: I5e6afef82a4f63ab42927725adf3881084a1e25c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7235
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Do all the handling in SB code with few parameters from devicetree.cb
instead of having mobo callbacks.
Change-Id: I8fd02ff05553a3c51ea5f6ae66b8f5502509e2bc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7199
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I9cc549b7862ee535928bd06b5fb4bd38bb67a992
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7279
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
That takes them out of .data
Change-Id: Idf88ddaacb2f78ba6a0260e3511b34edc269731d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/7313
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Breaks abuild and is dependent on WIP, is WIP itself.
This reverts commit d7d0c8134854cba72f0c3fe25946b27ce0364b43.
Change-Id: I8b589b41632696aa4570abcceab5f3a3b0784649
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7319
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This is based on LENOVO X230 port. Board boots to linux via SATA.
Remaining Issues:
1. Native raminit sometimes fails with "timC write discovery failed"
even without changing the ram configuration.
I suggest altering the native raminit code so that it reboots
if that message appears to give a chance for the boot process to recover.
2. VGA does not work.
Native graphics initialization only supports LVDS and the
VGA Option ROM still hangs when run in SeaBIOS
3. USB does not work.
SeaBIOS/GRUB2 do not detect devices connected to USB ports
4. Sound needs corrected codec verb settings
Change-Id: Ib465a4824ef1a71ab6aa17bd40fc281215c6d44f
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/7020
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I37c302c7a17645f55d568c1a5f7bb791319ddbb4
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7286
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Change-Id: Ieee54e28641f88497503d6d91ddeb52ad091d78d
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7274
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
On the ASRock E350M1 a Nuvoton NCT5572D is used as SuperIO-chip. The coreboot
port to this board however used the driver of the Winbond W83627HF SuperIO,
which is compatible enough to get most stuff working, but which clears bit 6 in
register 0x2B. This switches the function of pin 38 of the NCT5572D from
RSTOUT1# output to GP36. The PERST# pin of the ethernet chip and the
unpopulated miniPCIe slot are connected to this pin, so they didn't get reset
during a reboot.
Using the newly added driver for the Nuvoton NCT5572D fixes this problem.
There is also a trace from the pin 37 of the SuperIO, which can be configured
as RSTOUT2#, to pin 82 of the USB3-chip with unknown function.
As with the wrong driver, PS/2 keyboard and mouse do work in SeaBIOS and GRUB
but not in Linux.
Change-Id: I4bc78406afd3b0e10a1b04b561147e0ed94cc494
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/6266
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Minnowboard Max was broken by
commit 454625c5 - intel/fsp_baytrail: Fix SMM/SMI
because TSEG wasn't set to 8MB by the FSP.
The default in the FSP is 1MB.
Change-Id: I2e671a6ca0240e931399920c62439c36133789aa
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7240
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: I167d2c9ad3f690de41fee51dd7800ce76b328e41
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7231
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: Id5c5d68048169b0cd400926cead2d1835194d1a5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7210
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: Ibbcdbb44c7586ac8d445870789647f8ff9585452
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7232
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
With following settings
1.Coreboot 25Mhz
2.Maxim codec configured with MCLK=25Mhz
2.I2C 400Khz fixed
4.Including Enable/Disable SHDN bit when LRCLK starts/Stops
5.Removed PLL toggle workaround routine.
audio playing is smooth before/after S3, no noise when recording so change
MCLK from 19.2 back to 25Mhz.
BUG=chrome-os-partner:26948
BRANCH=firmware-rambi-5216
TEST=test audio play and record on Rambi, works fine.
Change-Id: I5602feb39721344feab837ff4a3a18309a47a6a6
Signed-off-by: Kein Yuan <kein.yuan@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/193881
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit bfe1d535aa2f20a32e163abeb99f3d657e2b43ab)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7219
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
We're no longer configuring hotplug + backlight settings from
devicetree, so remove these entries + fields.
BUG=chrome-os-partner:27304
TEST=Compile only.
BRANCH=rambi+squawks
Change-Id: I7e27fbc070a9ea774e7dcbe551d61b1b1682a47f
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193831
(cherry picked from commit 4ab13fd3aa2634673bb099bdfd714a21adc3caa0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7218
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
bit: 7 6 5 4 3 2 1 0
LFP2 EFP2 EFP3 CRT2 LFP EFP TV CRT
so int 15 0x5f35 need to return 0x8(LFP/eDP) instead of 0x2(TV).
BUG=chrome-os-partner:26365
BUG=chrome-os-partner:27505
BRANCH=rambi
TEST=Booted with and without HDMI connected monitor. DEV screen
always showed on eDP panel on Rambi.
Change-Id: I8f876e78383424f517689eb25e9229a27739957b
Original-Change-Id: I77edbeb3c86549f90302b4296b5a2f50313ca675
Signed-off-by: Kein Yuan <kein.yuan@intle.com>
Reviewed-on: https://chromium-review.googlesource.com/193303
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit dd375462147f182331f336ba826108e58b4e0a47)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7216
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Id0aecbd3e45bdf9661168ebd0e55f17dc6febaaa
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7203
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ia4060831236d72f880eeff6263ada40cf195fb12
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7180
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I0ace5f49b84170ab4701ad1b70d3c50c99066e53
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7178
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Part number is used only for coreboot ROM identification and
in coreboot tables. Rather than guessing the P/N, just use readable name.
SMBIOS uses information from EEPROM and so isn't affected.
Change-Id: I33534c3acb83f20d5b493c82bfc98896bf64ff1a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7177
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I88e889efe43b32e7efc59ea40d13e79209a27264
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7179
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
The simo board with console output at UART port 1 (COM2) will not produce
any output if CONFIG_UART_FOR_CONSOLE=1 is set correctly.
Commit f29200240e428761827ab8d179fa23068bfa9d59
(superio/ite/*: Factor out generic romstage component)
will only and always activate UART port 0 unregarded to
CONFIG_UART_FOR_CONSOLE value.
Now the UART port which was selected by CONFIG_UART_FOR_CONSOLE
will be enabled and used for console output
Change-Id: Ibbd2b5115b1ed4763962ba32fc9c19431a906c78
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Reviewed-on: http://review.coreboot.org/7060
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I54955fa44d126b7a3d382f57b4aa0dac01688104
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7129
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I9909a5b2bdb4b59219db6304fa4332802fe0301c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7127
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I5cf6dbab64f3eda02e6418be65f21e28ddf0d9ff
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7125
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I3badb18839773e38834de967a51c29a306975d20
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7152
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I242664032d368794d828fce73a20f75ded45051d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7151
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These functions are only used for ramstage.
Change-Id: I089230ca625037637c7af061b0939fd981dbdfd2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7148
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Regression introduced with commit
7b23ae0 AGESA: Trace execution with AGESAWRAPPER()
As the call is made before console_init() is called it must
not call any printk(). Debugging Olivehill and Parmer platforms
using a custom FPGA (as these boards have no Super-IO UART) have
been observed to halt and/or delay at early boot.
Change-Id: I3ab4e5378db44aece9046c8636cde1053ce5390d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7059
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
|
|
Change-Id: Iddd4d99af7e1c70384f13f18d785f491c47c7617
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6712
Tested-by: build bot (Jenkins)
Reviewed-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
nyan_big: Add 204MHz BCT for bringup, use 1.2V for VDD_CPU
Reviewed-on: https://chromium-review.googlesource.com/183939
(cherry picked from commit a6df76afb5342b805baca749abb8265e15748dc1)
nyan_big: Add initial 792MHz BCT
Reviewed-on: https://chromium-review.googlesource.com/183975
(cherry picked from commit 61d0122fdce6dc9479666bb0a5bc079c6389f78a)
nyan_big: use RAM_CODE[3:2] for ram code
Reviewed-on: https://chromium-review.googlesource.com/184076
(cherry picked from commit 35e5c5e473f871cdc897473a31586afbececd716)
tegra124: support tri-state Board Id
Reviewed-on: https://chromium-review.googlesource.com/183855
(cherry picked from commit 1a9d1bd73aa2cd0c36203b247976ad0d00a360e4)
nyan*: Fix SPI pinmux configuration
Reviewed-on: https://chromium-review.googlesource.com/184281
(cherry picked from commit ac4106b673c285af66d72392bd4a8522aba98489)
nyan_big: Add 4GB 204/792MHz BCTs
Reviewed-on: https://chromium-review.googlesource.com/184159
(cherry picked from commit 5ff002d09f8db0543b58962f6c0d24627fb0937e)
tegra124: Add function for obtaining DRAM size via MC regs
Reviewed-on: https://chromium-review.googlesource.com/184535
(cherry picked from commit d4580c46de649903a266a99eb11c9126ba385b48)
tegra124/nyan*: Obtain DRAM size dynamically
Reviewed-on: https://chromium-review.googlesource.com/184431
(cherry picked from commit a7db71744771decc04cf1966efba70bf4897cfa3)
tegra124: Rearrange iRAM layout to allow more space for romstage
Reviewed-on: https://chromium-review.googlesource.com/184240
(cherry picked from commit 6bdaabbc068146a4516c724b71d31bb777dabcfc)
tegra124: Fix MemoryType field name in SDRAM parameters.
Reviewed-on: https://chromium-review.googlesource.com/185113
(cherry picked from commit 9caccd1e86a8c683402fab87d9f3a49b87496e97)
nyan_big: Initialize SDRAM without BootROM.
Reviewed-on: https://chromium-review.googlesource.com/183624
(cherry picked from commit a1cbc00aa80ec1ea52e833a8e31c8e4b27160e70)
tegra124: move FB_SIZE_MB to a more appropriate location
Reviewed-on: https://chromium-review.googlesource.com/184930
(cherry picked from commit ddea486fd4410394417c4e59039d46a324918bdc)
nyan: Initialize SDRAM without BootROM.
Reviewed-on: https://chromium-review.googlesource.com/185114
(cherry picked from commit 1ff51b580b28553919f91b11b443251b048cf26b)
tegra124: Save SDRAM parameters to PMC registers for LP0
Reviewed-on: https://chromium-review.googlesource.com/182928
(cherry picked from commit 7476b4bd0ecdc312476cce871d22f57915a0bd86)
tegra124: Rewrite SDRAM parameter saving code to be more efficient
Reviewed-on: https://chromium-review.googlesource.com/184388
(cherry picked from commit 25084bd0407624e4b2ff82388c32af1198c501a6)
nyan: Slightly change the way SDRAM parameter files are set up
Reviewed-on: https://chromium-review.googlesource.com/185286
(cherry picked from commit a31887b804f23e031c395113db582cd71f3d1b6d)
Squashed 16 commits for SDRAM support on nyan and nyan_big.
Change-Id: I07419985376277083d62400dd14fe8273f6d5ca8
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6949
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
baytrail: Change all GPIO related pull resistors from 10K to 20K
Reviewed-on: https://chromium-review.googlesource.com/187570
(cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e)
baytrail: workaround kernel using serial console on resume
Reviewed-on: https://chromium-review.googlesource.com/188011
(cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469)
baytrail: allow dirty cache line evictions for SMRAM to stick
Reviewed-on: https://chromium-review.googlesource.com/188015
(cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca)
baytrail: Optionally pull up TDO and TMS to avoid power loss in S3.
Reviewed-on: https://chromium-review.googlesource.com/188260
(cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6)
rambi: always load option rom
Reviewed-on: https://chromium-review.googlesource.com/188721
(cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9)
baytrail: use new chromeos ram oops API
Reviewed-on: https://chromium-review.googlesource.com/186394
(cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594)
rambi: always show dev/rec screens on eDP connected panel
Reviewed-on: https://chromium-review.googlesource.com/188731
(cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95)
baytrail: stop e820 reserving default SMM region
Reviewed-on: https://chromium-review.googlesource.com/189084
(cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24)
baytrai: update MRC wrapper header
Reviewed-on: https://chromium-review.googlesource.com/189196
(cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970)
rambi: Put LPE device into ACPI mode
Reviewed-on: https://chromium-review.googlesource.com/189371
(cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413)
baytrail: DPTF: Enable mainboard-specific PPCC
Reviewed-on: https://chromium-review.googlesource.com/189576
(cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612)
baytrail: Add config option for PCIe wake
Reviewed-on: https://chromium-review.googlesource.com/189994
(cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5)
rambi: Enable PCIe wake
Reviewed-on: https://chromium-review.googlesource.com/189995
(cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6)
Squashed 13 commits for baytrail/rambi.
Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6957
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
