| Age | Commit message (Collapse) | Author |
|---|
|
Remove rtd3 for emmc device on taniks
BUG=b:271003060
TEST=emerge-brya coreboot, flash to DUT and can boot to OS
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I03168ecbf4611f05acd8c6c722b6a5037a8cc31d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This will fix:
> [INFO ] Probing TPM I2C: tis_plat_irq_status() not implemented,
wasting 20ms to wait on Cr50!
BUG=b:277297687
TEST=builds
Change-Id: I611a2855d94167748d0f82a478687fe2cdf5846a
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74286
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used
for WLAN. Mapping derived from myst schematic.
BUG=b:275965982
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I5059be0bc011978e74ab4245e6ae037aa177ef9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Ensure that DXIO descriptors are updated using info from AMD and Myst
board schematics.
BUG=b:275960920,b:276744321
TEST=builds
Change-Id: Icdad785bcb90de036095bcc4219c15f55f4277fe
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74112
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This mainboard has SD slot available and therefore it should be enabled.
Use the same SD card configuration as for mc_ehl2 mainboard.
Change-Id: Icd9b25301311679cf93b05ba83a24e551261a020
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This mainboard has the RTC RV-3028-C7 connected to the I2C1.
TEST:
- Console Log shows no errors for RV-3028-C7 during I2C1 init
- Finalize device for I2C 00:52 shows correct date and time
Change-Id: I1b4115d7844a0c218fdf92cb1af2da5a95eb4337
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74652
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct the USB settings, suitable for this mainboard.
Change-Id: I943eb891e2f2d967acfd441c085063dbad49e993
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74651
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since mc_ehl4 was only a copy of mc_ehl1 in a first step, the default
value of the Kconfig switch EARLY_PCI_BRIDGE_FUNCTION must be set to
'0'. On this mainboard NC FPGA is connected to PCIe root port #1
(00:1c.0).
Change-Id: I15035523d8575d486c3f2d0ffe3916712ee89d7d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Since mc_ehl4 was only a copy of mc_ehl1 in a first step, the GPIOs must
be adjust according to the circuit diagram for this mainboard.
Change-Id: I66bfbb380e9a05b3a2c08d5d1980e9749b46ee43
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The patch disables Tccold Handshake to prevent possible display
flicker issue for Omnigul board. Please refer to Intel doc#723158
for more information.
BUG=b:279539826
BRANCH=firmware-brya-14505.B
TEST=Verify the build for Omnigul board
Change-Id: I04e54df5afe09c12e1cf774445d57e13ffd8819e
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74737
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iae2dc0a934f0ea3ca59d8a811f1daeedb090a7bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
For uni-processor platforms, with SMP=n or MAX_CPUS=1,
neither the LAPIC or IOAPIC MADT entries are added.
Change-Id: I8777f4e3b37fe7b564189c6bf48e3988026b2361
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
IRQ override from IRQ #0 to GSI #2 is changed from
MP_BUS_EISA to MP_BUS_ISA.
Change-Id: I115df037fd79e120b04e6aff9e53f963f045b997
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
i82801gx, i82801ix, i82801jx:
Maintain IRQ #0 to GSI #2 override as positive edge trigger.
ibexpeak, emulation/qemu-q35:
Change IRQ #0 to GSI #2 override to positive edge trigger from
the bus ISA default (positive edge).
Change-Id: Ia8a04daf3a79d9f2f4801dc85e4975278e30dc8a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add Kconfig COMMON_ACPI_MADT_IOAPIC to replace platforms'
implementations of adding IOAPIC and IRQ override entries
for ACPI MADT tables.
Platforms that have a more complex MADT may continue to
add custom entries using CUSTOM_ACPI_MADT.
Change-Id: I0b77769f89cc319ad228eb37bc341e2150b8a892
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74348
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
USB port 6 connects to a USB front camera, it should always probe.
Remove probe by rear camera fw_config.
BUG=b:273791621
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I554046718f6e0eb7197970f9a3808b3e1ea7f99c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Update devicetree
-Enable USB2 port5 for WWAN
-Update OVTI8856 setting
-Update USB2/3 Type-A 0/1 port location
Probe devicetree based on FW_CONFIG
-pen garage
-rear mipi cam
-USB WWAN
BUG=b:273791621, b:276369170
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I6cc7be2309483ce016bde57db34af078bd4d46b0
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
BUG=b:277294070
TEST=None
Change-Id: I0aa4e0bcfb06e5e5cb7e9d52f2d82b5818925267
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74284
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement `smm_mainboard_pci_resource_store_init` to store the
resources for XHCI devices. These stored resources are later used by
the elog code to log XHCI wake events.
BUG=b:277273428
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I608d51f438681ac529323c23cc707845a3d609d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74281
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable gfx_hda to allow for audio over hdmi.
BUG=b:277219546
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I58096f1408f66f968af1494e487cf2bfc43b9a0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74278
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the crypto device to the devicetree.
BUG=b:277214359
TEST=builds
Change-Id: I5394c5f9df64642d8633af84cf662652bd1a5cb2
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74275
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix after 'commit 69a13964ea6c ("sb,soc/amd,intel: Add and use
ACPI_COMMON_MADT_LAPIC")' broke interrupt delivery in kernel.
Apparently combination of LAPIC without IOAPIC is too rare
to be well supported.
Change-Id: I5e2fbf358cf644665b897afb0a9404abb5ca1df2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74472
Reviewed-by: Branden Waldner <scruffy99@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Mendocino and Rembrandt don't have an eMMC controller and also don't
have GPIO pins that eMMC signals can be multiplexed on, so drop the eMMC
related code from Mendocino.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib8ec49a7084bdd62e480baee75a280fde8b13d01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the
Kernel when an EC panic occurs. If system safe mode is also enabled
on the EC, the kernel will have a short period to extract and save info
about the EC panic.
BUG=b:268342532
BRANCH=firmware-octopus-11297.B
TEST=Observe kernel ec panic handler run when ec panics
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I37e566e459f39f8bc2dafc3c3915260259730ca6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add boxy supported memory parts in mem_parts_used.txt, generate
SPD id for this part.
1. Samsung K4U6E3S4AB-MGCL
2. Hynix H54G46CYRBX267
3. Micron MT53E512M32D1NP-046 WT:B
BUG=b:278983561
TEST=Use part_id_gen to generate related settings
Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com>
Change-Id: I317f2b31774627706babdea10776af05ab692d1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Yavilla board memory id setting references to yaviks.
This CL aligen it with yaviks.
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
H9JCNNNBK3MLYR-N6E 0 (0000)
H58G56AK6BX069 2 (0010)
K3LKBKB0BM-MGCP 2 (0010)
H58G56BK7BX068 3 (0011)
MT62F1G32D2DS-026 WT:B 3 (0011)
K3KL8L80CM-MGCT 3 (0011)
H58G66BK7BX067 4 (0100)
MT62F2G32D4DS-026 WT:B 4 (0100)
K3KL9L90CM-MGCT 4 (0100)
H58G66AK6BX070 5 (0101)
BUG=b:273791621
BRANCH=firmware-nissa-15217.B
TEST=run part_id_gen to generate SPD id
Change-Id: I4a5eb9e6e87a4adbc23f94f0eb92d5452c50e47c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
To aid in layout, the PCI ports for LAN and SD card were swapped.
SD Card is now on RP3 (clksrc 4)
LAN is now on RP8 (clksrc 3)
BUG=b:269371363
TEST=builds
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: If59849c13e4c42f00e3571c0385994ade5931adb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch disables PCH USB2 PHY power gating to prevent possible
display flicker issue. Please refer Intel doc#723158 for more information.
BUG=b:279117758
BRANCH=firmware-brya-14505.B
TEST=Verify the build for marasov board
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I5a5199be768fc59e2f053f8c50a49247145e7e72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74627
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The STARYU is the mt8186 detachable reference design, and the STARMIE
is a variant of STARYU. Let's rename the common config from STARMIE
to STARYU, and we can select the STARYU config for the follow up
mt8186 detachable variant.
BRANCH=corsola
BUG=b:275470328
TEST=./utils/abuild/abuild -t google/corsola -a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: If75e94e86420b0a216fe7a1a9dee9cb42bbd985c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74654
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Change-Id: I658596da1d84b486126d751b6066c3efd3f65290
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74523
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Google Brya variants like Nissa family selects
`SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION` to store CSE FPT
information.
BUG=b:273661726
TEST=Able to build and boot google/marasov.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I234b5d272077de9a6f0a9ba69fa015cda7ebd56c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74387
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Set the `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag to request End-Of-Post
right after PCI enumeration and handle the command response at
`BS_PAYLOAD_BOOT'.
With these settings we have observed a boot time reduction of about
100ms on google/rex.
TEST=Tests on google/rex with `SOC_INTEL_CSE_SEND_EOP_ASYNC' show
End-Of-Post after PCI initialization and EOP message received at
`BS_PAYLOAD_BOOT'.
Change-Id: I27b540eeddcada521eba91fcc51504831d6dc855
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Select EC_GOOGLE_CHROMEEC_SKUID and EC_GOOGLE_CHROMEEC_BOARDID to
provide common routine for reading skudid and boardid from Chrome EC.
BUG=b:277293398
TEST=builds
Change-Id: I8e42ba23dada9771f335df34275e44e51d645596
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74283
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3
and WWAN. The purpose of using this mutex is to prevent OSPM from
calling _ON and _OFF methods while WWAN kernel driver is calling _RST,
which accesses the GPIO pins.
BUG=NA
TEST=boot to OS and check the generated SSDT table for the root port.
The RPMX mutex should be generated under the root port.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I5b53765453bac0fc96e9651ab347069c7c8bf058
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73384
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3
and WWAN. The purpose of using this mutex is to prevent OSPM from
calling _ON and _OFF methods while WWAN kernel driver is calling _RST,
which accesses the GPIO pins.
BUG=NA
BRANCH=firmware-brya-14505.B
TEST=boot to OS and check the generated SSDT table for the root port.
The RPMX mutex should be generated under the root port.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I809eb84cb1a09deb168040e83041b65237a1b576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73383
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3
and WWAN.
BRANCH=firmware-brya-14505.B
TEST=boot to OS and check the generated SSDT table for the root port.
The RPMX mutex should be generated under the root port.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ia87b5f9d8300d6263c84a586256424799d3a45b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73382
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The mp2 PCI device is still present when no mp2 firmware is loaded. When
this device isn't explicitly enabled in the mainboard's devicetree, the
chipset devicetree default of the device being disabled is used. This
results in coreboot's resource allocator not allocating resources to
the device and since the bridge doesn't have enough MMIO space reserved,
the Linux kernel can't assign resources to it. Enable the mp2 device in
the mainboard's devicetree so that it gets its resources assigned by
coreboot.
BUG=b:277217097
TEST=builds
Change-Id: I21885c51ff08846b456675090946f381843ef5e6
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74277
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the audio co-processor in the device tree.
BUG=b:277214614
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I1e1749359804960bbd75d869385b9071e7f33be7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74276
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because WD SSD drive isn't holding the clock low for some reason.
So we change to read eMMC clkreq signal instead.
BRANCH=none
BUG=b:278495684
TEST=emerge-skyrim coreboot chromeos-bootimage and verify ok.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I3a9225473a6ae1ba01dc8e5d982c4999f073267e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74583
Reviewed-by: Chao Gui <chaogui@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Add the new memory support:
Samsung K4UBE3D4AB-MGCL
BUG=b:274373361
BRANCH=firmware-volteer-13672.B
TEST=FW_NAME=delbin emerge-volteer coreboot
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ie88c25b4b0f88ed299711f2b6b94006d5301554c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74556
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure GSC I2C and Interrupt GPIOs during the early initialization.
Add devicetree configuration for GSC device and enable the required
config items.
BUG=b:275959717
TEST=builds
Change-Id: I6e235356b252a7b68a42da128ffd3189a829f117
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74111
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers,
hence it makes sense to have a unified name across different device drivers.
BUG=b:278310435
BRANCH=firmware-brya-14505.B
TEST=Verified that the _DSD object is still present in the SSDT.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I5a69a47e67f6acaad5a5d1b67e437c5a41bebf3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74499
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the boxy variant of the waddledee reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:277529068
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_BOXY
Change-ID: Ief22eb000421c23abf6de3f99eb860bdae1e7919
Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add eSPI configuration for myst. Ensure the additional windows are used
and remove unnecessary addresses from the range used on skyrim.
BUG=b:275953893
TEST=builds
Change-Id: I7b40adec78d4e0b596596fa6e2951c79bd3bd8c7
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74110
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the `TcssD3ColdDisable` option in devicetree, as it exists
in Kconfig. The setting is only used on `starlabs/starbook` which
selects D3COLD_SUPPORT so the UPDs will not change.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I50e49e900c96748edd5b678765e47cc0e0d9b280
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74476
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Kconfig option SOC_INTEL_TIGERLAKE_S3 suggests that it's doing
something with S3, but it's actually disabling D3Cold support.
Remove it, and instead use D3COLD_SUPPORT so it's clear what the
option is doing.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id43f3e5c8620d474831cc02fcecebd8aac961687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74405
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCIe RTD3 support so the NVMe gets placed into D3 when entering s0i3
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I5eac65125c11dd04c5dbb5996c947ad734acdae3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update DXIO descriptors for birman-phoenix per schematic 105-D67000-00B
v0.7
Update devicetree to reference the updated DXIO descriptors.
TEST=boot birman and note the devices show up in the logs correctly
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I76cf6715b60a1857bf58349d70a623bf043594fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update the EC GPIO values for Birman, per schematic # 105-D67000-00B
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Icd9df120f555eb06f920f6263a8d2ab45c05baec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73971
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initial fch irq routing table for Myst.
BUG=b:275946702
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ic81c3cbfbb30a0beb3c4083624cf19abe6d1e694
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74109
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On Skyrim variants, the eMMC reset GPIO should be SSD_AUX_RST_L (GPIO6).
Update the port_descriptors to link the correct reset GPIO. Data
is from the skyrim variant schematics and go/skyrim-gpios.
BUG=b:278759559
TEST=reboot: 5 iterations
suspend_stress_test: 10 iterations
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I4713b3af23bb7684c9e2e81cf9c8d8a560b41a79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74512
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers
for FSP as crota is using a converged firmware image.
BUG=b:267249674
BRANCH=firmware-brya-14505.B
TEST="FW_NAME=crota emerge-brya
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage"
Cq-Depend: chromium:4430832
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I448c58f93fddc44904c1f5ef3f8939618eff536f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add sdram configs:
- RAM code 0x33: sdram-lpddr4x-K4UBE3D4AA-MGCL-4GB SPD for
K4UBE3D4AB-MGCL 4GB
- RAM code 0x34: sdram-lpddr4x-H9HCNNNFAMMLXR-NEE-8GB for
H54G68CYRBX248 8GB
BUG=b:278644249
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: If5b484b5324ba39dbb220f12bdb8344ecb5c4da5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73469
Reviewed-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Kconfig option SOC_INTEL_ALDERLAKE_S3 suggests that it's doing
something with S3, but it's actually disabling D3Cold support.
Rename it to D3COLD_SUPPORT to make it clear what it's doing.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ifc3f19912ac7ee55be8ec7a491598140f9532675
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Add supported memory part in mem_parts_used.txt, then generate.
K4UBE3D4AB-MGCL
BUG=b:267539938
TEST=run part_id_gen to generate SPD id
Change-Id: Iee41bb4511f2d77e5ddc2798f9d4db6137ed818d
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74497
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The M.2 NVMe SSD0 device is behind AMD PCIe bridge 0.2.4 (BDF),
hence update the correct bridge number in the device tree.
TEST: Builds and boots, the device enumerates.
[DEBUG] PCI: 00:02.4 [1022/14ee] enabled
[DEBUG] PCI: 01:00.0 [144d/a80a] enabled
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Change-Id: I43096beda0405bd392574319d50e7cd6a7f8d291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Need to tune I2C bus 0/1/3/5 clock frequency under the 400kHz for
audio, TPM, touchscreen, and touchpad.
Tuning i2c frequency for omnigul
I2C0 - Audio CLK : 293.7khz
I2C1 - TPM CLK : 388.8khz
I2C3 - Touch Screen CLK : 294.8khz
I2C5 - Touch Pad CLK : 389.2khz
BUG=b:275061994
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot, and measure i2c clock.
Change-Id: I7c4fdf0e003318a69b870b487a60accefbc0ffed
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: Ie75ce1eee3179a623da812a6b76c7ec457684177
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add boten supported memory parts in mem_parts_used.txt, generate
SPD id for this part.
1. Samsung K4U6E3S4AB-MGCL
BUG=b:278138388
TEST=Use part_id_gen to generate related settings
Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com>
Change-Id: I5f910393847c6494f77c009cb11f50b31bebffb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch enables all DDI ports on Rex board to support display port
tunneling and dual display on TBT dock.
BUG=b:273901499
TEST=Boot google/rex and connect two displays over a TBT dock and check the display functionality.
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I45ee5334fbb877bd58912c8d24920037f155dc42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74413
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update GPIO configs based on latest schematics (revision aabe36)
Move GPP_D4->GPP_A13 (BT_DISABLE_L)
Swap GPP_E3<>GPP_E8 (WIFI_DISABLE_L and PG_PPVAR_GPU_NVVDD_X_OD)
Move GPP_A13->GPP_A20 (GSC_PCH_INT_ODL)
BUG=b:269371363
TEST=builds
Change-Id: I958e45156515cf4ce236084ec823f9329d7a063d
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add G2 touchscreen GTCH7503 for craaskino.
Use SSFC to separate touchscreen settings.
Bit 38-41 for TS_SOURCE:
(1) TS_UNPROVISIONED --> 0
(2) TS_GTCH7503 --> 1
BUG=b:277979947
TEST=(1) emerge-nissa coreboot
(2) Test on craaskino with G2 touchscreen
(3) Test on craaskino with elan touchscreen
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I636f21be39f26a617653e134129a11479e801ea2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Create the screebo variant of the rex0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:276814951
BRANCH=None
TEST=util/abuild/abuild -p none -t google/rex -x -a
make sure the build includes GOOGLE_SCREEBO
Change-Id: I8d05ca7c0fe596378ca15d0734d46ad1dc63a1f9
Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74391
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Boards with SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID have
special handling for the time being.
Change of aopen/dxplplusu is coupled with sb/intel/i82801dx.
Change of emulation/qemu-i440fx is coupled with intel/i82371eb.
For asus/p2b, this adds MADT LAPIC entries, even though platform
has ACPI_NO_MADT selected. Even previously ACPI_NO_MADT creates
the MADT, including an entry for LAPIC address.
Change-Id: I1f8d7ee9891553742d73a92b55a87c04fa95a132
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The 'Starmie' is a mt8186 detachable reference design that will share
most of Corsola design. For AP firmware, there will be a few changes,
mostly in display (MIPI interface and w/o bridge), so we create it
as a variant in Corsola.
BUG=b:275470328
BRANCH=corsola
TEST=./util/abuild/abuild -t google/corsola -b starmie -a
Change-Id: Ic1556ad0031e9a24bf26fa84d7713b7b7928312a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add regulator VIO18 support to supply power for STA_HIMAX83102_J02 panel.
BUG=b:272425116
TEST=test firmware display pass for STA_HIMAX83102_J02 on Starmie.
Change-Id: Ie1dd9226b0c4f05f9c9ce6633b7384aa5eb4c978
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74342
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add G2touch touchscreen support for kracko.
BOE NV116WHM-T04 V8.0 with G7500 touch panel sensor IC
BUG=b:277852921
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot & test on DUT
Change-Id: Ic065d5dc2900c6ccfee09031f7a80cefc391f5dd
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74307
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All the variant will use the same dGPU, so make PCIEXP_SUPPORT_RESIZABLE_BARS common.
BUG=b:277974986
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: If8618f2da3133c6b52427375c55a69d7014c4881
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74371
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
The keyboard reset is not being used on this board, so disable the
functionality.
BUG=b:277294460
TEST=None
Change-Id: If7fb9ab0c9b1260d342313badb65c55bb9f788c0
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74285
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement the GPS_REQUESTDXSTATE function which forces the
current D notifier state to re-report.
TEST=verified that notifications are forced out when invoked using
acpiexec
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I6dab9b793fe1d0b1c875eddbe6ae324d2894efe6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Currently the DNOT function first checks to see if the current DNOT
value has already been reported. Add support to allow forcing regardless
if it had been sent already.
TEST=confirmed that when enabled, all events notify. When disabled, only
events on value change are notified.
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I7a93cca6a8f922574dd46b46572b230755db9aa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Currently the value was being truncated to 4 bytes. Change so that
the full 8 byte value is passed.
TEST=verified function returns expected value using acpiexec
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: Icfc775de680e328a2b240595223d7098fee3dc3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This function adds support to convert a integer into a 8 byte buffer
TEST=verified returned buffer is as expected using acpiexec
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I89eb50f1452657c26b97eb5609ed956fa8ee8117
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The logic was not equals, rather than the intended greater than or
equal to for checking the minimum GPS revision.
TEST=version check passes as expected now
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I66bf1fc32295e1b9e9c41c661ea8e395a1592a86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Create the taranza variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:277664211
BRANCH=dedede
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_TARANZA
Change-Id: Id64e48ff2acd6e827fe586a00376183930ddc7e1
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74295
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Its EDID string is "LTN121AT07L02". The vendor sets BLC_PWM_CTL to
0x31313131.
This frequency seems working well on the x200 with this panel, which
is said to be LED.
Change-Id: I8b0ec04c6f6fcb6d4027a5114698db87d7718191
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74182
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Yavilla is a variant of yaviks which is almost identical
to yaviks, so is reusing the yaviks coreboot variant.
so update the GPIO tables to handle these based on fw_config.
BUG=b:277148122
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I831b199055c931e7a4a393eeb9e75e83c8ae3c3a
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74264
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select hdmi vbt bin files based on MB_HDMI field of FW_CONFIG.
BUG=b:277148122, b:276369170
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I210003c27c83155dd5a768c1a6cdcfd8c849d256
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74262
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Yavilla will leverage yaviks FW build.
It has one additional USB Type-A0 port, support stylus and support WWAN.
Here update devicetree based on FW_CONFIG for yavilla's design.
-Enable USB2 port3 and USB3 port1 for USB2/3 Type-A0
-Enable USB2 port5 and USB3 port3 for WWAN
-Enable pen garage
-Enable rear mipi cam
-Enable Synaptics touchpad
BUG=b:277148122, b:276369170
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I38dbcf5920d12adb1f84885bdfa4c2f2faf2eb9e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add I2C peripheral reset configuration required during early init.
Enabled I2C generic and HID drivers.
BUG=b:275939564
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I44668295fb6ed03992df9d9fc075792e181d1a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74108
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable ELOG for Myst.
BUG=b:275938975
TEST=builds
Change-Id: I214e2dbaa3bc40c3f4ca68c8ee4b1398446d7090
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74282
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The USB port configuration was derived from the PPR and schematics.
Primary functions are:
2 USB-C ports
1 USB SS+ type A port
2 Cameras (World/User facing)
1 Bluetooth transceiver
1 WWAN
BUG=b:275905635
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Iecb256cad7b2daea1fddfc8323e88ff5c38d1e51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable the XHCI controllers in the devicetree for myst project.
BUG=b:275905635
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I05dc5bb157f0ef955e4b37e34d7b32678e42ebc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable internal graphics on the phoenix soc for myst projects.
BUG=b:275900162
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ia6ef1ca07b9af491c7d937be5cef4f051852e486
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74104
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
DDI 2..4 are the display outputs multiplexed onto the 3 USB type C ports
as DisplayPort alternate function, so use the DDI_DP_W_TYPEC connector
type for those.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I659d62bfb426e3e47214203490c34e9c200beee2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74299
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the blob type for TypeId0x25_Mp2Fw_MDN_AD03.sbin to
subprogram 0. Delete the extra MP2FW line.
BUG=b:246770914
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I5418b1ed59e1916b971d2eece9f6a2fd0e51b1b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This reverts commit 6bfca1b689e48be4f72e8fa401f3558d845fc282.
Reason for revert: dependency for revert CB:73903
Change-Id: I56bab4d85d04e90cacfe77db59d0cde6a8a75949
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Enable iommu in devicetree for myst in order to allow kernel to load and
initialize IOMMU.
Bug=b:276805280
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I94e93afe775b070253464a9d187ad6c028d1b811
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable the console UART for myst devices.
Bug=b:275900837
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I52c1b86c46907216d88f98917968b833af0d5d41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74103
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add initial FW_CONFIG for the myst program.
BUG=b:
TEST=builds
Cq-Depend: chrome-internal:5674351
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: If74c3649d4e8d174d9fe00a4b896c2351ee3ab19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74102
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Enable EC SCI events for eSPI.
BUG=b:275894894
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I8fd858c484f6fcf952bcb4f756ba2e4728091d8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74101
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add supported memory parts in mem_parts_used list, and generate SPD ID
for these parts.
These new memory are added for yavilla.
DRAM Part Name ID to assigna
H58G66BK7BX067 4 (0100)
MT62F2G32D4DS-026 WT:B 4 (0100)
K3KL9L90CM-MGCT 4 (0100)
H58G66AK6BX070 5 (0101)
BUG=b:277148122
BRANCH=firmware-nissa-15217.B
TEST=run part_id_gen to generate SPD id
Change-Id: I3c48b9763f54e2e69f7c2d494fefbabedab2a389
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
No need for variant to use _weak.
BUG=b:276818954
TEST=new_variant_fulltest.sh rex0
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I7ad904e06e5d83edf4bc11cafd5060ca409bd4ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74294
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
This patch configures external V1p05/Vnn/VnnSx rails for Uldren
to follow best practices for power savings – untested though.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
BUG=b:272829190
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I3ff8e7db33bfbe4048327825406462262e8d2919
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74335
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With EC's lid switch implementation, there is no need to maintain the
lid switch state in mainboard. Hence remove LIDS ACPI object from
mainboard.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Read the lid switch state
correctly through /proc/acpi/button/lid/LID0/state.
Change-Id: I0f8dc7216337268c421a475f54ee5b28abf33d08
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9971209539aa7b74e55673141902b6ad0d698e4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73985
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1c4bdab44f0d73546f52614917dccbe71f0911a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73984
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel Archer City CRB is a dual socket CRB with Intel Sapphire Rapids
Scalable Processor chipset. The chipset also includes Emmitsburg PCH.
It was tested with LinuxBoot payload on both dual and single socket
configurations.
The multisocket support depends on Change-Id:
I4a593252bb7f68494f4ccce215ac9cf1eb19b190
Change-Id: Ic02634cd615e2245e394f10aad24b0430cf5cd17
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71968
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add SMI handler code for Myst platform.
BUG=b:275858191
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I92e5e6aef7ab0b84a96d976e29ebf96b56f6f1a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74100
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:270624655
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Id18a311097d575973087eb92fd446a5c511f570e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
