| Age | Commit message (Collapse) | Author |
|---|
|
Change b41ae2 (mb/google/octopus: Enable wake-over-wifi for octopus
variants) changed the GPE mappings to accomodate for WiFi wake
pin. However, this resulted in TPM interrupt pin being removed from
the GPIO to GPE mapping. Since we do not support true interrupts in
coreboot, GPE_STS registers are used to identify if an interrupt has
triggered. Change in GPE mapping resulted in this information to be
lost when talking to TPM thus resulting in "Timeout wait for tpm
irq".
This change fixes the above issue by assigning GPIO block for TPM
interrupt back to DW1 and moving GPIO block for wake-over-wifi pin to
DW3. DW3 was mapped to NW_31_0 which only has debug header pins and
CNVI pins (none of them are used for reading GPE_STS or as wake
sources).
BUG=b:109824918
TEST=Verified that there are no "Timeout wait for tpm irq" messages
when talking to TPM.
Change-Id: I30768177a838a684948f7485d760c8b83c3190f7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
|
|
TPM over SPI/I2C config selection got changed in
https://review.coreboot.org/c/coreboot/+/24903 so this CL is fixing the
same.
BUG=None
BRANCH=None
TEST=Build for Soraka & make sure that TPM is probed over I2C interface
rather than SPI.
Change-Id: I077e4dc03520e26eb9f6404a7eb1edd99925de77
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/26890
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since there are two cameras on Nami and only one camera on Sona.
We need to disable rear camera/DMIC on all Sona sku.
BUG=b:109710674
BRANCH=master
TEST=Verify if only front camera/DMIC shown on Sona
Change-Id: Id84ee22c9ffc15db78be3bbad148af5cd7dc866e
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/26876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Since there are two cameras on Nami and only one camera on Pantheon.
We need to disable rear camera/DMIC on all Pantheon sku.
BUG=b:109720689
BRANCH=master
TEST=Verify if only front camera/DMIC shown on Pantheon
Change-Id: Ibe48a945dc57f2c05344479253040ad1945d92fd
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/26875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I3e0ca62ad88aea5c99f9f0902ad8553656469a1c
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/26936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Update GPIOs in baseboard to match latest schematics:
1. Get rid of STEST GPIOs(GPIO_{62,84-89})
2. Get rid of SD_CD_ODL(GPIO_134)
3. Get rid of KB control GPIOs(GPIO_{144-146})
4. Configure GPIOs for pen eject (GPIO_{144,145}). Additionally, fix the
configuration for other pen GPIOs.
BUG=b:109764138
Change-Id: I8e40dd90b2784596f055538e57ea67482c4c517a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26874
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These files are directly extracted from the vendor firmware.
Change-Id: I1dea2843255e4a3e93fbb734dea284be029dbc45
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/26654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This adds a INTEL_GMA_VBT_HAVE_DATA_FILE Kconfig option for the path
to point to the mainboard dir and to select
INTEL_GMA_ADD_VBT_DATA_FILE by default.
Change-Id: I730cb0737945631e2d5379a9e26b8c039ec6dc49
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/26653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested and working:
- Wi-Fi
- Ethernet
- WWAN ? (interface is created in linux, didn't actually test it, should work)
- Bluetooth
- Speakers
- Internal mic
- SD card reader
- Suspend and resume
- Keyboard, touchpad, trackpoint
- Fan
- Webcam
- 4 RAM slots
- All USB ports
- mSATA
- VGA ROM (FIXME: black screen after resume from s3)
- Native graphics initialization (FIXME: probably incorrect panel frequency, etc. in GRUB; in linux everything's fine incl. resume from s3)
- libgfxinit
- GRUB payload
- SeaBIOS payload
- Internal flashing using flashrom
Not tested yet:
- Fingerprint reader
- Colorimeter
- Smart card reader
- Docking station
- VGA output
- Optical disc drive
- Discrete graphics
TODO:
- Test BDC detection
Change-Id: Ic7918ea18712221cc62c5564caede340f71ce400
Signed-off-by: Evgeny Zinoviev <me@ch1p.com>
Reviewed-on: https://review.coreboot.org/26136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Chip sections must be covered by a PCI device.
Fixes chip_ops not being executed and TPM shows up in OS.
Change-Id: Id0ecd2f2f3e303f2228743369a8025b327bee61d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
When the normal termination is None, the standby termination is
none also as per Doc# 572688. So when termination is only needed in
standby, use the IOSSTATE setting that drives low/high via the
Tx mode instead.
Also disabled Speaker in Standby state to save power.
BUG=b:79874891, b:79982669
BRANCH=None
TEST=Compiled and flashed image on Bip. Checked that suspend_resume cycles
pass. Checked that bluetooth is functional on resume. On Yorp, checked
that speaker is functional after a suspend/resume cycle.
Change-Id: I6a3852548f944176a80feb32e9885b03b8af25db
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/26762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Issue observed on the board is: too many jack interrupts.
cat /proc/interrupts | grep da7219
58: 84292 15709 0 0 IO-APIC 58-fasteoi da7219-aad
Updated pad configuration for Jack IRQ pin to fix the issue.
BUG=b:109655907
TEST=Jack insertion & removal detection is working.
Change-Id: I41ef9d40325677b01ca94ec3215e7feded76dcc3
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/26851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
During measurement of signals during Elan touchscreen power on, saw
that the enable_gpio delay was not sufficient as there is a +1.5 ms
delay during power on. Adding more delay to take this into account.
BUG=b:78311818
BRANCH=None
TEST=probe power on signals to ensure meet timing requirements
Change-Id: Id661a202188a97aef97514ebecd0be6fc022d21e
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/26725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Power off does not seem to use the ACPI _OFF function, but rather the
smihandler. Creating variant_smi_sleep function for nami to handle
the power off sequence during reboot/power off.
BUG=b:78311818
BRANCH=None
TEST=Run "poweroff" command from AP console with SMI_DEBUG enabled
Make sure delays are consistent with spec
Change-Id: Ifeea545fe268be249793b3e508c51f5e4c1a3460
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/26724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Adding common chip config structure which will be used to return data to
common code. When common code requires soc data, code used to fetch
entire soc config structure. With this change, common code will only get
the data/structure which is required by common code and not entire
config.
For now, adding i2c, gspi and lockdown configuration which will be used
by common code.
BUG=none
BRANCH=b:78109109
TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check
values are returned properly using common structure.
Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/26189
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables wake-over-wifi functionality for all octopus
variants by making the following changeS:
1. Configure GPIO_119 as SCI active-low
2. Update GPE0_DW1 to include the group that GPIO_119 falls under
3. Add wake property to wifi device
BUG=b:77224247
TEST=Verified that wake-over-wifi works on yorp.
Change-Id: Ibae199c43e4d96da4c2f68f71a849c2f23d3e7b9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since Vayne added one more skuid 3A67, we need to disable rear
camera/DMIC for vayne skuid 3A67.
BUG=b:75073617
BRANCH=master
TEST=Verify if only front camera/DMIC shown on Vayne
Change-Id: I9131b4c41bf189829be4e7e6bfaf4a96765cfa15
Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/26855
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides option for mainboard to skip coreboot MP
initialization if required based on use_fsp_mp_init.
Option for mainboard to skip coreboot MP initialization
* 0 = Make use of coreboot MP Init
* 1 = Make use of FSP MP Init
Default coreboot does MP initialization for CNL.
Change-Id: Ia7da0842996a9db09e6e2b7b201b3a883c3887a2
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/26819
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch provides option for mainboard to skip coreboot MP
initialization if required based on use_fsp_mp_init.
Option for mainboard to skip coreboot MP initialization
* 0 = Make use of coreboot MP Init
* 1 = Make use of FSP MP Init
Default coreboot does MP initialization.
Change-Id: I8de24e662963f4600209ad1b110dc950ecfb3a27
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/26818
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2cce52561d30e30e1c81752cd2a455e7211006eb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Piotr Król <piotr.krol@3mdeb.com>
|
|
There is active work to convert remaining two boards,
PC Engines alix1c and alix2d, to EARLY_CBMEM_INIT.
Change-Id: I87e3963af7ef719e9fa2a8b0df34a896265905f0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Remove 2nd software stack in pc80 drivers directory.
* Create TSPI interface for common usage.
* Refactor TSS / TIS code base.
* Add vendor tss (Cr50) directory.
* Change kconfig options for TPM to TPM1.
* Add user / board configuration with:
* MAINBOARD_HAS_*_TPM # * BUS driver
* MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2
* Add kconfig TPM user selection (e.g. pluggable TPMs)
* Fix existing headers and function calls.
* Fix vboot for interface usage and antirollback mode.
Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/24903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ibe16242d98531ff8e8a696f571496c6f46ea964b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested on Lenovo T430:
The TPM is advertised through ACPI tables and the version can be
read using tpm_version, tcsd and tpm_tis.
Change-Id: I0b0c39e7aa1be4a479325d4b5eff5892a7e2f69f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/26780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I5ace69f9a624da9556a14c498a592305a3b1c89f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I0aefe25e3af61c747c06629e365b8e27459181aa
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I9d35bc706b0daac1e234441c86286cb2957f89ee
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib06f771b6b50f2ad1af440c8019e8cca38d2a4f0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I490091e7dec5a46040e8ba7cd5cd6c244b017e30
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Id2622e473959dcf105bfeeaebddd582593a3c274
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ic334f65e5c27d4f773f81fc1c9e3df7d63d47a11
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I52fe5a67e6b914426943c3499904e0546c3ea623
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I958fe66655cc3c589ce6709b83c56a9472628324
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I335dda11d0c1ee58bd2728580c48c41cef574654
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Icc7d7fee38e41f4bfda685fd42bf504a788b440c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I891b056b64fde27ef0e351f8cf24a258fb5cabfa
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I750ec788b7526ee2a7aa803bffb93805cedfb2ff
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I8e21843e11498438e115f1f82f94f2944ae7a3c8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I3f85e2ef0682b808f6e99dc406bccb88badcb82c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I24fd33887152c12b9db9742af475115b02b31ff2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Iacbd72e1c60573f4bb5ffa40717141e9fbca01bf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I0b0a09098bd4185ae36f1468ebc151e39668ee86
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib7068f381971d1270b22cb03937f1e7fa30acb46
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I0a4b7d774db1b2b486f44bd7363555c15d464484
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I0458e4fe08e32daf0b880e0a29752297e8159fe6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I085a5b7dca252943590a30c1afe6ad776dac6c97
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I299c579c996da4e0e9fa1fc4d8b40706356509f8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I15c34c65fba22c297cd26c2ee23bcf5e7b56e233
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I8999f1603014b558a9efd3823614020ba0ecce82
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I2022100f7d1d7b7f2667e45efc8cea074b424b65
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I2c3e44e1f7ad7dd14f62fd99fd48c485ec74b3cf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Id572144827b515e9e84c51aa3e4f8a20baf1c212
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ie1e319375ab0f5565805557b15e0bf821dfb223e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I05d938add5aabe2557a5d915a54a920e7ba9f50f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I6a3df8074d874cc5f4e1ff45c422c685cc90dbb4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I2c2e00cef28414d6beff1e37539977ee4c6e5088
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib2bb6cc80ac2bdc389c60c7ffac4bba937f0fca8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Icae1983be6b8c5aebb121be8a383e2613e064122
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26462
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Provide empty stub implementations for set_pcie_reset() and
set_pcie_dereset(), many boards do not provide a proper one.
Change-Id: Ia6811442905ef1776fa5a8e3f5d4433e86e42f88
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I5034debc2296352e698898c20910a2d76071e30a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Callsite declared returning int, which makes more sense
than u8 the motherboard side code defined the functions
with.
Change-Id: I8ee83aa2833408ad163c9011a076e08578f3ca6f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ifb73f51d34e179ff95b2b1e3ab28adc21717f9ab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Because of struct sci_source table of events that have to generate SCI or
SMI, <soc/smi.h> was included to kahlee/grunt gpio.c files. However, new
code transfered most of SCI/SMI/interrupt programming (with exception of
events not associated to a GPIO pin), and therefore smi.h is now included
by gpio.h. It was also added to some other files where they are not needed.
Only smihandler.c truly needs it. Remove the includes.
BUG=b:78139413
TEST=build and boot grunt.
Change-Id: I64cf0796103a5226ddace03d05d94160bf93aa69
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/26721
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Load vbt-vayne.bin by reading sku-id.
BUG=b:80509366
TEST=Boots to OS and display comes up.
Check the board specific vbt binary loaded.
Change-Id: Ia26ea4a9b7679aeb9d98f19ffaa1b686af828339
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/26749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change may require board_mismatch=force if mainline firmware was
used. If vendor firmware was used this patch remove flashrom confusion
since system product name reported by SMBIOS tables will match mainline
firmware.
Change-Id: Ic6942bc36df1a02db61b035ddc892585688aa27b
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/26757
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently the throttle event handler method THRM is defined as an
extern on the intel bd82x6x and lynxpoint chipsets, then defined
again in the platform with thermal event handling. In newer versions
of IASL, this generates an error, as the method is defined in two
places. Simply removing the extern causes the call to it to fail on
platforms where it isn't actually defined, so add a preprocessor define
where it's implemented, and only call the method on those platforms.
This also requires moving the thermal handler, which now includes
the define to before the gnvs asl file.
TEST=Build before and after, make sure correct code is included.
Change-Id: I7af4a346496c1352ec20bda8acb338b5d277d99b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26123
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Along with other patches submitted for review to get the chipset
parts working, this allows Linux or other OS to use a TPM module
plugged into the 20-pin LPC header on the board, by exposing its
presence through the ACPI and PNP tables.
This patch adds to the Kconfig and devicetree.cb files.
Tested with the TPM/FW 3.19 and the trousers tools.
Change-Id: I8c1aea245f81fa44a6bdd5301bbee958cbcdfaaa
Signed-off-by: Kevin Cody-Little <kcodyjr@gmail.com>
Reviewed-on: https://review.coreboot.org/26193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
With implementation of LATE_CBMEM_INIT, top-of-low-memory
TOLM was adjusted late in ramstage. We do not allow that with
EARLY_CBMEM_INIT so the previous maximum of 1024 MiB of MMIO
space is now used with statically set TOLM.
Also remove support code for the obsolete LATE_CBMEM_INIT
this northbridge used.
Change-Id: Ib3094903d7614d2212fbe1870248962fbc92e412
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This change adds and updates headers in all of the mainboard files that
had missing or unrecognized headers. After this goes in, we can turn on
lint checking for headers in all mainboard directories.
Change-Id: Ibe038a8f7468253b21fd2ac90c045d0c9cc89dfc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The driver only supports streaming images flipped horizontally
and vertically. In order to ensure that all current users will
be fine if or when support for upright streaming is added,
require the presence of the "rotation" control now.
BUG=None
BRANCH=None
TEST=Verified the MIPI and USB camera function on DUT board
Change-Id: I7e3abdea9071da1a089c7165f6bb609428090792
Signed-off-by: Lai, Jim <jim.lai@intel.com>
Reviewed-on: https://review.coreboot.org/26727
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Andy Yeh <andy.yeh@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Patch adds required changes for RT5682 codec enablement for the BIP board.
And code clean-up nhlt blob selection method in config.
BUG=b:77892150
TEST=build and boot on a BIP PO board.
verify headset codec i2cdetects at address 1a.
Change-Id: Iee91518c03a0e9e6ed52bc54a60fc607730a0b7d
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-on: https://review.coreboot.org/26211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change updates rambi ec init to perform SMI mask setting using
google_chromeec_events_init.
Change-Id: I7def3c07b4d7bfbe15b2d1c45381bdc31b7e3476
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Implement method to access the SuperIO's harware monitor (HWM) IO space.
Set the PSU fan using a new CMOS option psu_fan_lvl. Add the CMOS option
to all board that use NPCD378. In case no CMOS is set use the default
fan level 3.
The HWM space can be written to at any time, but the SuperIO has to be
notified that a write is ongoing. After clearing the write-lock bit all
changes are applied at once.
Tested on HP Compaq 8200 SFF.
Change-Id: I56ce7ad1df88638589a577b8a09d5d775557887b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26050
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds all USB ports to the device tree. Additionally, it adds _PS0
and _PS3 ACPI methods for the visible USB A ports, which makes it
possible to control the port power (VBUS) of each port individually.
Change-Id: I80ba090f323fbf9fc2b333b1c647b7dfb3393ff6
Signed-off-by: Emil Lundmark <lndmrk@chromium.org>
Reviewed-on: https://review.coreboot.org/26472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add Careena variant, based on the grunt board.
BUG=b:80106042
TEST=Build Careena
Change-Id: I87a24f6d8115aacf5b21181f3820cf2718ad252a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The FPMCU is using the standard cros-ec-spi interface on GSPI1.
Configure the GPIOs controlling the MCU too.
We need to be able to wake from S3 on the MCU interrupt, re-configure
GPE0 DW0 to point to GPP_C bank.
BRANCH=poppy
BUG=b:79666174
TEST=exercise the cros_ec interface, e.g. 'ectool --name=cros_fp version',
verify the MKBP events by doing 'ectool --name=cros_fp fpmode fingerup'
then 'ectool --name=cros_fp waitevent 5 10000', toggle the other GPIOs
with the flash_fp_mcu script.
Change-Id: Ib417dcf84cda8e354060785cd16a7b6b812148d5
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: https://review.coreboot.org/26684
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As far as I can see this Kconfig option was used wrong ever since it
was added. According to the commit message of 107f72e (Re-declare
CACHE_ROM_SIZE as aligned ROM_SIZE for MTRR), it was only necessary
to prevent overlapping with CAR.
Let's handle the potential overlap in C macros instead and get rid
of that option. Currently, it was only used by most FSP1.0 boards,
and only because the `fsp1_0/Kconfig` set it to CBFS_SIZE (WTF?).
Change-Id: I4d0096f14a9d343c2e646e48175fe2127198a822
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/26566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.
Change-Id: I34f9bffcced5ccdd8691994b78fffed057021d0e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.
Change-Id: Ic135c3f8eb18818d0ae3b63f53b542905815bbd0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.
Change-Id: I06840476ad187cbb6e6af554b5c8e8c4d66f6624
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.
Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I0bb515fbf7b1ae9b0dd1b61bad0c45a7f38d6767
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The chrmoeos.fmd file will be common across variants, so move it out of
of grunt directory and into the variants/baseboard directory.
BUG=b:80106042
TEST=Build grunt
Change-Id: I259d85f60c5e19e00f7d9149542bcfdcc6dfaf4f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The SPD files will be common to many of the mainboards, so move them out
of grunt and into the variants/baseboard directory.
BUG=b:80106042
TEST=Build grunt, make sure spd.bin is the same.
Change-Id: I53975a46a8c7d7e519bb6f7ef6ccd0b817ac4c92
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently the throttle event handler method THRT is defined as an extern,
then defined again in the platform with thermal event handling. In newer
versions of IASL, this generates an error, as the method is defined in
two places. Simply removing the extern causes the call to it to fail on
platforms where it isn't actually defined, so add a preprocessor define
where it's implemented, and only call the method on those platforms.
Change-Id: I6337c52edaf9350843848b31c5d87bbfca403930
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I16cdf2781ce1bf9458300de70a87a3bb98d01636
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
These pins should not have pull downs configured in standby state as that
can cause contention on the termination circuitry and lead to incorrect
behavior as per Doc# 572688 Gemini Lake Processor GPIOTermination
Configuration.
Furthermore, some of these pins were configured with normal termination
of None which would as per above mentioned document lead to a standby
termination of None anyways.
Instead of pull downs, use the IOSSTATE setting for driving low
via the Tx mode.
BUG=b:79874891, b:79494332, b:79982669
BRANCH=None
TEST=Flashed image and booted to OS on Yorp. Touchscreen does not
consume power in suspend state.
Change-Id: I7dcf3691b969d018b3cfb6af3f7467c9b523fee5
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/26491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This won't actually get called yet since the GPIO pin has not been
configured as SMI.
BUG=b:80295434
TEST=grunt: Made sure events could be processed.
Change-Id: I189e26196e4543b3e34bff5d9df8566eff07d585
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/26546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The default interrupt control for GPIO pins within stoneyridge is for
edge triggered, high. However, sometimes these need to change, or maybe
the interrupt needs to be reported or delivered. This was the case of
platform grunt, where the interrupt related bits were being changed
afterwards. Ideally all the bits should be programmed through the same
procedure. Create several PAD_INT definitions (for general configuration,
for trigger configuration and for interrupt type configuration) and change
function sb_program_gpios() to accept the output from PAD_INT_XX and
program all the necessary bits while keeping compatibility with other
PAD_XX definitions.
BUG=b:72875858
TEST=Add code to report GPIO and interrupt configuration, build grunt and
record a baseline. Add new code, rebuild grunt and record a test output.
Compare baseline against test, there should be no change in GPIO or
interrupt programming.
Remove code that reports GPIO/interrupt configuration.
Change-Id: I3457543bdf64ec757fd82df53c83fdc1d03c1f22
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix lint error due to non-ASCII characters
BUG=none
BRANCH=none
TEST=check if no error in checkpatch.pl script.
Change-Id: Iec7682e460c8e0d467a70349a23390554cc1de92
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/26562
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This board was used a test target for the x4x DDR3 raminit patches and
has an easy to access DIP8 socket.
What is tested and works:
* S3 resume
* PEG, PCI, USB, SATA
* Sound
* Ethernet
* Native graphic init (textmode and linear fb) on the VGA output
* Passing memtest86+ with 2 2Rx8 4G dimms
* PS2 Keyboard
* Flashing coreboot internally from vendor BIOS.
What does not work:
* Running dram at 533 MHz (limited at 400MHz currently)
Tested with two 4G dual rank DDR3 dimm, booted SeaBIOS and Linux
4.10.
Change-Id: If01bf658e52d273c3c203d362f21c3cb9c623f40
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20003
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves PL2 override to variant_devtree_update for two reasons:
1. This function was added to basically override devtree settings in
variant specific code. So, it would be a good idea to perform all the
overrides in a single place.
2. Adding a device for performing nami_enable would require changes to
devicetree and special handling for calling this device enable. Thus,
nami_enable was never getting called.
BUG=b:80148703
Change-Id: Ifa24a7b6e99cad2368b3d656a757f26297373121
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In cbdbf018 (mb/google/reef/variants/: Add new memory ID) a
new memory configuration entry was added. However, it was using
spaces for indention. Correct that.
Change-Id: Iaf788b0ad8a6ef3b001e7f29a6710e6e8f731ecf
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/26513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The BT W_DISABLE2# pin is connected to GPP_E4 in the latest schematic.
Update GPP_E4 as GPO and set 1 as default.
BUG=b:79993692, b:72007632
BRANCH=None
TEST=Enable/disable BT/WLAN by following command.
Enable:
localhost ~ # iotools mmio_write32 0xfdae0590 0x40000201
localhost ~ # iotools mmio_write32 0xfdae05a0 0x40000201
Disable:
localhost ~ # iotools mmio_write32 0xfdae0590 0x40000200
localhost ~ # iotools mmio_write32 0xfdae05a0 0x40000200
Change-Id: I9ef1a5314652ab29172d246abd58ee4e1a8a6299
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/26502
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIO APU_BIOS_FLASH_WP_L is first read in ROM stage to determine the
state of the BIOS FLASH Write Protect signal at boot.
The result of this read accumulated in the vboot state that's passed on
to the upper layers of the stack.
Therefore this GPIO must be configured as a "reset stage" GPIO, not
a "RAM" stage GPIO.
BUG=b:79866233
TEST=firmware_WriteProtect
Change-Id: I1d96ab4bbfeaf9db9f74cf0c58cbab2104079bf7
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/26498
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new port based on autoport.
The board uses a NPCD378 SuperIO, that is full of custom hardware.
The 8MiB flash SOIC-8 can be accessed after cutting of a part of the
DIMM slot holder. The flash IC has no diode, powering a part of the
board while flashing externaly, including the Standby-LED.
The following have been tested and is working:
* Native raminit with up to four DIMMs
* Libgfxinit on DisplayPort
* USB
* EHCI debug
* Serial on RS232
* Ethernet
* PCIe on x4
* PCIe on x16
* SATA
* Booting GNU Linux 4.14 using SeaBIOS 1.11.1 as payload
* Flashing internaly
* PS/2 is working
Untested:
* PCI slot
* LPT port
* VBIOS
* S3 resume
Not working:
* PSU fan managment (runs at 100%)
* Half of SuperIO functionality is unknown
TODO:
* Reverse engineer remaining SuperIO registers
* Reverse engineer SMM
Fixes on follow-up commits:
* Added PSU fan control
* Reverse engineered some of Super IO's HWM registers
* Added SMBIOS tables for IPMI
Change-Id: I4ee8da6349222fda8b6c30a7210ffdd65c183439
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/25385
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The file under lib/ will be removed with K8 and
Geode LX is the only other platform using it.
Change-Id: Id49d72358ecfc4aae4980e3ae787952073e5c838
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Tested with GRUB 2.02 as a payload, booting Arch Linux with
latest kernel. This code is based on the output of autoport
as well as existing ga-b75m-d3h and ga-b75m-d3v mainboards.
Working:
- Serial port I/O
- S3 suspend/resume (broken with SeaBIOS 1.11.1)
- USB ports and headers
- Gigabit Ethernet
- Integrated graphics (libgfxinit)
- PCIe x16 graphics
- PCIe x1
- SATA controller
- Hardware Monitor
- Fan Control (fancontrol on linux works well)
- Native raminit (4+4GB, 4+2GB, 2+2GB, DDR3-1333)
- Native graphics init with libgfxinit
- flashrom, using the internal programmer. Tested with coreboot,
as well as with the vendor firmware. Backup chip is untested.
- NVRAM settings. Only `gfx_uma_size` and `debug_level` have been
tested with values different from the default.
Untested:
- VGA BIOS for integrated graphics init
- DVI port. It can detect a "fake" display, that is, an
EEPROM connected to the DVI port.
- PS/2 ports
- Audio: Only rear output (green) has been tested.
- EHCI debug.
- Parallel port
- Non-Linux OSes
- ACPI thermal zone and fan control (probably not working)
Not working:
- SATA devices with Tianocore (payload issue)
- PCIe to PCI bridge. It seems to be poorly supported on Linux,
it lacks a public datasheet and vendor BIOS behaves in the
same way: The bridge and the devices behind it appear, but
drivers fail to find devices attached to the bridge.
Change-Id: I598a0b75093a0f1aef2ac615035d66786a8c22cb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/25912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I42b19d660b681cca8fea7d2f52b43c8daceb5e35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I74461e75abce6cdd0c7a16b3a6589de3486a1a3f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
