summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-07-12mb/google/volteer: Convert static ASL files to new DPTF implementationTim Wawrzynczak
This patch converts the current DPTF policies from static ASL files into the new SSDT-based DPTF implementation. All settings are intended to be copied exactly. Change-Id: I964c53afbd503d47a07b982672425f0e7a986a3f Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41895 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/google/dedede: Add ability to provide override GPIO tableKarthikeyan Ramasubramanian
For variants with slightly different GPIO configuration, add support to pass an override GPIO configuration table. BUG=None TEST=Build and boot the waddledee mainboard. Change-Id: I2f1c6dc2ea5499bff96a471c4461339ef01ee19a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-12mb/ocp/deltalake: Pull POST complete pin low before booting payloadJohnny Lin
Delta Lake uses GPIO pin GPP_B20 for POST complete event, BIOS needs to pull this pin low for BIC (Bridge IC) to start reading sensors. Tested=On Delta Lake oBMC, bic-util slotx --get_gpio to confirm the pin is low. Change-Id: I7e05f8a7caead8ee0632af4ff60ccd8b2412b3dd Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-12mb/intel/tglrvp: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4Brandon Breitenstein
This change enables PCIEXP_HOTPLUG to support resource allocation for TCSS TBT/USB4. BUG=b:149186922 Change-Id: Id3066204c8a780ade251c7be4052a60a861e43db Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-07-12mb/intel/tglrvp: Enable recovery in TGL RVPShaunak Saha
Share "EC in RW" GPIO with depthcharge. Also we define the CONFIGS needed CHROME, CHROME_EC and use the chrome lid and recovery. BUG=None BRANCH=None TEST=Build and boot TGL RVP. Check recovery works with crossystem recovery_request. Change-Id: I1e88200e3f8418e5b0ab39ac65ed1b3545ce111e Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-07-12mb/google/dedede/var/drawcia: support internal usb cameraWisley Chen
BUG=b:160741778 TEST=build drawcia, and check camera can be regconized Change-Id: I67bee9773b53451653abd76088d1d4062fe3da8f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42929 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/google/dedede/var/drawcia:Add audio support (ALC5682 codec, MX98360A spk amp)Wisley Chen
Select the drivers for ALC5682 codec and MX98360A spk amp BUG=b:158202026 TEST=FW_NAME=drawcia emerge-dedede coreboot chromeos-bootimage Change-Id: If271f11f10a85ade6f61ff8c25bfafeb67a69af6 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-12mb/ocp/deltalake: Use VPD data to configure FSP UPD at romstageJohnny Lin
Read VPD variable 'fsp_log_enable' to decide enabling FSP log or not. With VPD_RW_THEN_RO, VPD_RW takes precedence over VPD_RO, and would be set to enabled if both places cannot find it. Tested=On OCP Delta Lake, use vpd to create and set fsp_log_enable and verified the results are expected. Change-Id: I0b3463acedd90e8e17f7e4eedc2fab63644f87e1 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: insomniac <insomniac@slackware.it>
2020-07-12mb/getac/p470: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: Ida12426c51313a7642b5c363e58a79d77b1b096b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-12mb/supermicro/x9scl: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I65fedfa7e8b2fbb72b3109a8790445e38909976a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-12mb/intel/tglrvp: Enable s0ix for tglrvp up3 and up4John Zhao
This change enables s0ix for tglrvp up3 and up4 platform. TEST=Built image and booted to kernel. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I657bee1d7ee120ae15ccb4a33f9eb2fcf5cca65a Reviewed-on: https://review.coreboot.org/c/coreboot/+/42954 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/intel/tglrvp: Enable CpuReplacementCheckJamie Ryu
Enable CpuReplacementCheck for TGLRVP with a CPU socket. Test=build and verified with tglrvp Change-Id: I75b4a4609c172c341087077228e23c6d31a9e7e1 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-07-12haswell: Move some MRC settings to devicetreeAngel Pons
There's no generic way to tell whether a mainboard has an EC or not. Making Kconfig symbols for these options seems overkill, too. So, just put them on the devicetree. Also, drop unnecessary assignments when the board's current value is zero, as the struct defaults to zero already. Change-Id: If2ebac5fcab278c97dfaf8adc9d1e125888acafe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43129 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12haswell: Automatically check if Intel GbE is to be enabledAngel Pons
If the Intel in-PCH GbE MAC is enabled in the devicetree, then tell MRC to enable it as well. No one can ever forget to set this option anymore! Change-Id: I946af36d16c94bb1a0f146604d0329fe6d6ce7e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43128 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12haswell: Add function to retrieve SPD addressesAngel Pons
And use it instead of directly writing to the MRC struct. Change-Id: I7f04db29a08512c1a8b2b2300dba71cb3b84a5c5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12haswell: Automatically determine system typeAngel Pons
Check the PCH's LPC device ID to know the system type instead of relying on hardcoded numbers. The `get_pch_platform_type` function is MRC-safe. Change-Id: Icfe7c2dccb7c7a178892ad3a2e34ca93b33b2bb9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43124 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12haswell: Introduce ENABLE_DDR_2X_REFRESH Kconfig optionAngel Pons
This Kconfig symbol allows doubling the memory's refresh rate, assuming that the MRC actually cares about it. It is disabled by default except on the mainboards which explicitly enabled this setting in `pei_data`. Change-Id: I6318dad0350d1c506c67f9d117d0ae8dad871281 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12haswell boards: Drop unused romstage.c includesAngel Pons
Several of these includes are no longer necessary. Get rid of them. Since "raminit.h" already includes "pei_data.h", we can omit including the latter for brevity's sake. Change-Id: Ia7e9dadf87114ca9ea4761b89909ea035cdfc38a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43121 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12haswell: Factor out `max_ddr3_freq`Angel Pons
All mainboards choose the maximum speed of DDR3-1600. Change-Id: I8863f9d1df950b924f596689ebf1bfda5d317e06 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43120 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12haswell: Compute disabled channel masks at runtimeAngel Pons
All mainboards have a non-zero SPD address to implemented DIMM slots. Knowing this, it is possible to compute the MRC slot population masks automatically instead of hardcoding the values on each mainboard. Change-Id: Ia8f369dd1228d53d64471e48700e870e01e77837 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43119 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/lenovo/t440p: Factor out common MRC settingsAngel Pons
There's no need to redefine common settings. Change-Id: I43922b2a1fdf90aa5004a43a17e9bc53337d88c5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12mb/google/slippy: Factor out common MRC settingsAngel Pons
There's no need to redefine common settings. Change-Id: I4c6b65bce42b875bb55e8d04da44afe9c18fb6e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12mb/google/beltino: Factor out common MRC settingsAngel Pons
There's no need to redefine common settings. Change-Id: I62f5014cf1fea093aee17023b48fd4d404279410 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12mb/intel/baskingridge: Factor out common MRC settingsAngel Pons
There's no need to redefine common settings. Change-Id: If0cbc147791496bafc85831c1f88d3eb71b63350 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12mb/supermicro/x10slm-f: Factor out common MRC settingsAngel Pons
There's no need to redefine common settings. Change-Id: Iee5ca6188de4cea9393efb66baa089969353b4e6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12mb/asrock/h81m-hds: Factor out common MRC settingsAngel Pons
There's no need to redefine common settings. Change-Id: Ie4ced6efc8119afca070ce86634a3c31c6580d0f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12mb/asrock/b85m_pro4: Factor out common MRC settingsAngel Pons
These settings are the same on all boards. Since the other boards currently overwrite the struct contents, it doesn't make a difference. To ease review, the same settings will be dropped from other boards in separate commits, one board at a time. Change-Id: I500b7a1d7d97c6976e0c7c10ca491d3875cae22b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12haswell: Relocate `mainboard_romstage_entry` to northbridgeAngel Pons
This is what sandybridge does, and if done properly allows factoring out common settings. Said refactoring will be handled in subsequent commits. Change-Id: I075eba1324a9e7cbd47e776b097eb940102ef4fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12haswell boards: Fix writes to 16-bit DxxIR registersAngel Pons
The DxxIR (Device xx Interrupt Route) registers in RCBA are 16-bit wide, so do not use 32-bit operations to program them. Note that the DxxIP (Device xx Interrupt Pin) registers are 32-bit, so using 32-bit operations on them is correct. Change-Id: I9699b98d5fcd26b2c710bf018f16acc65dcb634e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12haswell: Drop `struct romstage_params` typeAngel Pons
It only contains a pointer to another struct. Flatten it. Change-Id: Iab427592c332646e032a768719fc380c5794086b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12haswell: Make `copy_spd` a weak functionAngel Pons
Instead of using function pointers, we can use weak functions. So, drop the pointer from `romstage_params`, leaving `pei_data` as the only remaining member. This will be cleaned up in a follow-up commit. Change-Id: I3b17d21ea7a650734119a5cab4892fcb158b589d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-11mb/asrock/b85m_pro4: Reduce Super I/O ACPI codeAngel Pons
We only need ACPI for the PS/2 devices. Plus, the NCT6776 ACPI code makes Windows BSOD with STOP 0xA5 (ACPI_BIOS_ERROR), which is bad. Change-Id: I4cfad012684264b21284674e8e3713a5d8bb37be Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42430 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-11nb/intel/haswell: Add `mb_late_romstage_setup` functionAngel Pons
This function is called at the end of `romstage_common`. Only one board makes use of it, the Lenovo ThinkPad T440p. To preserve behavior, call it after `romstage_common` has done nearly everything. Change-Id: I35742879e737be4f383a0e36aecc6682fc9df058 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43094 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-11mb/google/beltino: Move Super I/O init to bootblockAngel Pons
Also remove an unneeded `pch_enable_lpc` function call. Change-Id: I83158a655670d4e6cd91f6bf3332d1b6f9f655d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-07-10mb/hp/abm: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I2a97954a36e5af37dc3c379c39afa24030daceea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-10mb/google/zork: Rename get_gpe_table to variant_gpe_tableRaul E Rangel
This matches the other methods. BUG=b:154756391 TEST=Build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6ba1fc5756c17da4dc1727425af17c4582c01a18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-10mb/google/volteer: remove ripto variantNick Vaccaro
BUG=b:160711124 TEST="FW_NAME=ripto emerge-volteer coreboot chromeos-bootimage" and verify that the build does not fail. Change-Id: Ic132256a192b8cb77662963bea844f193eb912d9 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-10mb/google/zork: enable i2c devices in verstageMartin Roth
Zork devices shut down the i2c controllers in S3 to save power. On resume, they need to be enabled in verstage before being accessed or the system hangs. BUG=b:160834101 TEST=Resume works with psp_verstage. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I7b8c7e12847876dab4ca74d67d3c41e63d7727cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/43334 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-10AMD mainboards: Drop commented-out includeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I6f71419ea23b973b0bedb426e20cb3dc460ef68d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43271 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-10mb/asrock/imb-a180: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I00b3af64b6f842d298e91c20ab5f54f0ca3197ee Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-10mb/*/Kconfig: Drop spurious warning about disabled boardsAngel Pons
No boards are disabled anymore. Change-Id: Ic8f7bdcc02faa73ce8e647756d40b20a920fc430 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-07-10mb/gizmosphere/gizmo2: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: Icc3f9a4f71001547ef3d1efe6fc7551b5c690f92 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-10mb/biostar: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I18ddd8a4821d83c038f0a1d17f50247271566e42 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-10mb/amd/olivehill: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: Ic09b0ee6437766a3ddf126217540f25854a2a562 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-10mb/bap/ode_e20XX: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I9cc4fe7c643458c9d2fa124539a0fd21013ef451 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-09mb/lippert: Align whitespace and commentsAngel Pons
This reduces the diffstat between the two boards. Change-Id: I6754d22139be52c66a9dda5d8e71f1092ecf0697 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43272 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09ACPI: Drop commented-out DSDT DefinitionBlock instancesAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I9b5589d4596eead83a5897b083ccb85ef05a03d5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43270 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09mb/lippert/toucan-af: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: Icb59d04c2a8f6ec3b0d1b8b74336c003f521acfe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-09mb/lippert/frontrunner-af: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I8836bf05dc84a25640dc63b41e1232d8fb1f50a9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-09mb/emulation/qemu-i440fx: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I8781912fe87ee568b7ea6003414c75f255c8cd07 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-09mb/emulation/qemu-q35: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I54f3fe0d3b0c988ab6f9065bea81a385507e9747 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-09mb/aopen/dxplplusu: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I3f9b31a2bfb85ceb9ff833c076e062291c944923 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-09mb/intel/glkrvp: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I6948a0b9a6b699cb44e3e02d9e134180bac2fa14 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-09mb/asrock/b85m_pro4: Add Super I/O GPIO tableAngel Pons
Information taken from the boardviews. We are not configuring any GPIO in bootblock, but we may want to do so in the future. Change-Id: Iac16f02490adcccd9486718847ca2b1a47f4e6cf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42404 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09mb/asrock/b85m_pro4: Properly select muxed functionsAngel Pons
The old values were completely out of whack. Use the same settings as vendor firmware. The SUPERIO_NUVOTON_NCT6776_COM_A option overwrites configured settings, so drop it from Kconfig to prevent conflicts. Change-Id: I9743741518adc153d594ccae65298c7dcc8a88d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-09haswell: Drop GPIO indirection layersAngel Pons
This simplifies things and makes type checking possible. Change-Id: Iefc9baabae286aac2f2c46853adf1f6edf01586f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-09mb/google/slippy: Put GPIOs in a C fileAngel Pons
This will allow dropping the pointer inside romstage_params. Change-Id: Iec6dac1a271b22d6c09b4064a9e8a310e57026a6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-09mb/google/beltino: Put GPIOs in a C fileAngel Pons
This will allow dropping the pointer inside romstage_params. Change-Id: I536225351a0353298381c16cff25f39098c19bba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-09haswell: Turn RCBA configuration into a functionAngel Pons
Instead of passing around a pointer to an array, just write the relevant registers directly. Note that intel/baskingridge used spaces to indent line continuations and had to be replaced with tabs to quell Jenkins. Change-Id: Ifa06a2ab24da9b8c6aac6480542fa32d04f6d6fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-07-09mb/siemens/mc_apl1: Use OPCODE menu set up of fast SPI driverWerner Zeh
The common fast SPI driver has a function to set up the SPI OPCODE menu. Use this function here instead of coding it again as it results in the very same register values being written. TEST=Compare register values in both cases and make sure they match. Change-Id: I98457a0b0652f746734ee4204e10acd09b6e5fda Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43166 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: <uwe.poeche@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09mb/lenovo/t440p/romstage.c: Drop empty functionAngel Pons
There's a weak definition in chipset code that does nothing as well. Change-Id: I2531e8b9d48eb4a1a667f22a81bb082ec98c1199 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-09soc/intel/baytrail: Rename "pmc.h" to "pm.h"Angel Pons
This reduces the differences between Bay Trail and Braswell. Tested with BUILD_TIMELESS=1, Google Ninja remains identical. Change-Id: I3d4c1285bdc4b061383b7bb6262f69671166b9c4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-07-09mainboard/intel/tglrvp: Remove unused PrmrrSize chip configSubrata Banik
Refer to commit 7736bfc TEST=Able to build and boot TGLRVP. Change-Id: Ie9a97cee7d7793077167db3a642dcbca45b09427 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43139 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/google/zork: Do not select VARIANT_SUPPORTS_PRE_V3_SCHEMATICS for VilbozFurquan Shaikh
This change drops the selection of VARIANT_SUPPORTS_PRE_V3_SCHEMATICS for Vilboz since it did not have any build with pre-v3 schematics. Change-Id: I3919ad43e1dae95a4fa71073e83865e92f30dfec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43225 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/google/zork: Add helpers for v3 schematics and wifi power enableFurquan Shaikh
This change adds following two helper functions: 1. variant_uses_v3_schematics() - Check whether the variant is using v3 version of schematics. 2. variant_has_active_low_wifi_power() - Check whether the variant is using active low power enable for WiFi. In addition to this, Kconfig options are reorganized to add two new configs - VARIANT_SUPPORTS_PRE_V3_SCHEMATICS and VARIANT_SUPPORTS_WIFI_POWER_ACTIVE_HIGH. This allows the helper functions to return `true` early without checking for board version. Eventually, when a variant decides to drop support for pre-v3 schematics, it can be dropped from selecting VARIANT_SUPPORTS_PRE_V3_SCHEMATICS. Similarly, when the variant decides to drop support for active high power enable for WiFi, it can be dropped from selecting VARIANT_SUPPORTS_WIFI_POWER_ACTIVE_HIGH. Change-Id: I62851299e8dd7929a8e1e9a287389abd71c7706c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43224 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/google/zork: Move GPIO_137 configuration to ramstageFurquan Shaikh
This change moves the configuration of GPIO_137 to happen in ramstage since there is nothing in coreboot that requires the state of write protect GPIO for zork. Change-Id: Ibaf8e7d9dd5d13a9b39b10ac0174de345b8380f5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43223 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/google/zork: Do not share "write protect" information with depthchargeFurquan Shaikh
This change removes "write protect" entry from the list of GPIOs shared with depthcharge as done for other Chrome OS boards in CB:39318. Change-Id: Ibd39e8d6835e465b2ab5eebcc245e45db5d84deb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43222 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/asrock/b85m_pro4: Disable PS/2 keyboard wakeupAngel Pons
This results in a wake from S5 as well. Since the PS/2 keyboard now works, this behavior is annoying and, therefore, undesired. Change-Id: I180f17c87df23f2a1bbd5c968c64a4b2bc7d9978 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42431 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/asrock/b85m_pro4: Correct GP01 output levelAngel Pons
This allows the CPU fan tach signal to reach the Super I/O. Change-Id: Ibf73d7c7c1951b75ee4e0c731caf951f2c6bfcae Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42402 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/asrock/b85m_pro4: Add missing HWM IRQ on devicetreeAngel Pons
Otherwise, there are complaints about it from the allocator. Change-Id: Ibf6124c3720959154d0b9649871f9bf68a912f14 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42401 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/asrock/b85m_pro4: Correct Super I/O GPIOsAngel Pons
GPIO2 is not used as such, GPIO7 is though. Also relocate GPIO1 settings under the correct PnP device. Confirmed findings against boardviews. Change-Id: I4a88ac82d640ca709e7875b4d34b9babb1f2e0a4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42400 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/asrock/b85m_pro4: Expand Super I/O commentsAngel Pons
Change-Id: I03ca67d748725283ba8382e476d70eb5554f5fb8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42399 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/asrock/b85m_pro4: Correct PS/2 keyboard IRQAngel Pons
No wonder why the PS/2 keyboard was being detected as a mouse! Change-Id: I7080c8210d96b079a5c08d98554ed154141086a6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42398 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/asrock/b85m_pro4: Drop spurious LPC decode rangesAngel Pons
Only one generic decode range is needed for the HWM. Change-Id: I964a073efbfaa1d79d3483d59ad04fe674bcb275 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42131 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/asus/p8z77-v_lx2: Correct Super I/O GPIO settingsAngel Pons
Compared against superiotool dumps with vendor firmware. Still boots. Change-Id: I49f36b2805e36695d7a53865e87dfafdb897594e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42482 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/intel/baskingridge: Put GPIOs in a C fileAngel Pons
This will allow dropping the pointer inside romstage_params. Change-Id: I04b695cbe2a6485b42ab037f4f7359a2429c3440 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-08sb/intel/lynxpoint: Factor out RCBA Function DisableAngel Pons
Comments stating that this was mainboard-specific were very wrong. Change-Id: I7026ca9c7dabd01b4a0c0549b697e006d5f75eb8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-07-08mb/google/slippy: Factor out common romstage settingsAngel Pons
There's no need to repeat the same values over four variants. Change-Id: Ifc4a9961fe9c87f15a6039e6e478682fab5b0bb7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-08mb/google/zork: Enable psp_verstageMartin Roth
Finally enable psp_verstage for zork. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: If6a12c2074d7c84c0cb766393c66f5eff29a58d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-08mb/google/waddledee: Enable AudioMaulik V Vaghela
1. Enable HDA Pci device in devicetree 2. Enable I2C4 in devicetree and fill ACPI information 3. Pass correct IRQ GPIO for headset jack BUG=None BRANCH=None TEST=Audio playback and recording works on Waddledee. Change-Id: I77aaa27bb29460ef834c3dd090ced868f2e99616 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Yong Zhi <yong.zhi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41765 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/ocp/deltalake: Enable LPC IO 0x600 decode for BICBryant Ou
BIC uses LPCflash utility to flash FW, it uses LPC to send the bridge IC image from host to bridge IC, 0x600 ~ 0x6FF is used to send BIC image for in-band update support. TEST=Use LPCflash utility to flash BIC FW on YV3 successfully. [root@localhost lpcflash_101_bin]# ./lpc_update.sh Y3BRDL_D06.bin Update Bridge IC Firmware from LPC Deltalake linux utility ver:1.01 build time: Feb 11 2020 14:30:55 Processing image file: Y3BRDL_D06.bin .. of size 206968 (0x00032878) bytes .. file will be padded to a 64-byte size .. with DEBUG Enabled Generating CRC-32 for file. Done (0x4e3905a3). iBytesRead (0x00007c00). Discovering LPC boot loader. Discovered @ 0x3f8. Configuring LPC boot loader. Configured @ 0x00000600. Sending header block. Sent. Loading firmware into target. Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 16512 bytes ................. Load complete. Update done! Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com> Change-Id: Ia1ea9b35b154225fdfd8955830e6c42b453a81ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/42856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-08mb/google/dedede/var/drawcia: add elan touchscreenWisley Chen
BUG=b:155002684 TEST=build drawcia, and check touchscreen can work Change-Id: Ib6a190d2f6fc5132af0e58c6df9919381e88f699 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-08mb/ocp/deltalake: Configure IPMI FRB2 watchdog timer via VPD variables in ↵Johnny Lin
romstage Add VPD variables for enabling/disabling FRB2 watchdog timer and setting the timer countdown value. By default it would start the timer and trigger hard reset when it's expired. The timer is expected to be stopped later by payload or OS. Tested on OCP Delta Lake. Change-Id: I3ce3bdc24a41d27eb1877655b3148ba02f7f5497 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-08mb/ocp/deltalake: Update IIO PCIe bifurcation according to different configsJohnny Lin
In romstage get the config from BMC IPMI and update the IIO accordingly. Tested on OCP Delta Lake with FSP WW24 release, with lspci checking bifurcation register values are expected. Change-Id: I412336c32d093fe2bbdc7175f8e596923c77876f Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-07-08mb/google/dedede/var/drawcia: Support Elan touchpadWisley Chen
BUG=b:155002811 TEST=build drawcia, and check touchpad can work. Change-Id: I674236aa6937a0444a85e6b8e2fb9a7925b56f5c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42922 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07google/trogdor: Add new variant PompomJulius Werner
This patch adds a new variant called Pompom that is identical to Lazor for now. Also reorder variants alphabetically while we're here. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I5a0f297413765bce8353d5a781f0f67446de4e7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-07-07vendorcode/intel/fsp/fsp2_0/cpx_sp: Update to FSP ww26 release and adapt socJonathan Zhang
CPX-SP FSP ww26 release added UPDs to allow FSP serial redirection. Also update memory map HOB definition file accordingly. The CPX-SP soc code is updated to direct FSP log to SOL. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ifd86fb710a0b2bdc8a43225b50b24f585d320caf Reviewed-on: https://review.coreboot.org/c/coreboot/+/42840 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/lenovo/t60: Fix override devicetreesNico Huber
When converting to override trees in commit c1dc2d5e68 (mb/lenovo/t60: Switch to override tree), some device nodes were missed. These are essential, as `chip` configuration data is always tied to device nodes. The resulting `static.c` contained multiple copies of the `chip` configuration structs, but the wrong ones were hooked up. The therefore missing configuration of the clock gen led to general instability, especially with SMP under Linux (probably due to the attempt to enter lower C states on an idle core). Passing `maxcpus=1` to the Linux kernel served as a workaround. Change-Id: I6c26d633d1860cf9a5415994444e75ae1c2e59ad Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43150 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/vilboz: Drop gpio.c from variants/vilbozPeichao Wang
Update GPIOs since Vilboz hardware design follow schematic V3.2, so gpio.c is unnecessary. BUG=b:157744136 BRANCH=NONE TEST=flash the bios to vilboz DUT and test touchpad function Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I575f8b233b56185f3281ad7127bc274bda5ea801 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42986 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/vilboz: Fix variant ID for v3+ schematics for vilbozPeichao Wang
At this moment, Vilboz board version is 1 and it according to v3+ schematics, however WiFi power enable is active high. This change sets VARIANT_MIN_BOARD_ID_V3_SCHEMATICS for Vilboz as 1 and VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW as 2. BUG=b:160547115 BRANCH=None TEST=flash the bios to vilboz DUT and test WIFI module Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I9699bb839a801ab7d14c38b971ec28e3a322a997 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-07mb/intel/tglrvp: Add PMC.MUX.CONx devices to devicetree for tglrvp_up3John Zhao
Two usb Type-C ports under the actual mux device. Each port has its own ACPI device entry. These nodes are the ones that the USB Type-C port/connector device will refer to in order to configure the mux. TEST=Verified the scope of PMC.MUX CONx in the SSDT on Tigerlake RVP board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I7210e00cebe16a5fb8417ac23abad98e574e0982 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42953 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/volteer: Change ov2740 HID of Chrome driver to match withDaniel Kang
Windows definition There was a review comment for Chromium Linux ov2740 driver that Windows driver already set the HID as INT3474 and suggested to have the same value for Chrome. The upstreamed Linux driver code has INT3474 as HID and this patch is to set the same HID in ACPI configuration. https://patchwork.kernel.org/patch/11540753/ BUG=b:160334865 BRANCH=none TEST=User-facing camera should work with the driver which set the HID as INT3474 Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I10e98d32899f31d91c1cc7ddfa099af73d8aef37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43006 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/volteer: Fix world-facing camera LED is always on issueDaniel Kang
Volteer world-facing camera has a privacy LED and it is supposed to be turned on only when the camera is being used. But the LED is always on and this is to fix the issue. RCAM_SNR_PWR_EN (RearCAMera_SeNsoR_PoWeR_ENable) GPIO, which controls the world-facing camera LED, was not in the power-up and power-down sequence definitions and this caused the issue. BUG=b:160341981 BRANCH=none TEST=Build and boot volteer proto 2 board. Start a camera app and check the world-facing camera LED is only turned on only when the camera is working. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I564690baffddfdd0f998525992643aaf16ba4b02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42985 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/zork: update telemetry settings for dalbozChris Wang
update telemetry value for SDLE test result. BUG=b:152922299,b:152369472 TEST=emerge-zork coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I14d218243931271ba15ec4113e9bc46c670fb2ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/42999 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/volteer/var/terrador: Update gpio settings and overridetree.cbDavid Wu
Based on schematic and gpio table of terrador, generate gpio settings and overridetree.cb for terrador. BUG=b:156435028,b:151978872 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Verify that the image-terrador.bin is generated successfully. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I4bf9081b034bc4cd566dde45586be8309cdbb4a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42302 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/volteer/var/terrador: Add memory parts and generate DRAM IDsDavid Wu
This change adds memory parts used by variant terrador to mem_list_variant.txt and generates DRAM IDs allocated to these parts. Added memory 1. MT53E512M64D4NW-046 WT:E 2. MT53E1G64D8NW-046 WT:E BUG=b:159195585,b:152936481,b:156435028 TEST="emerge-volteer coreboot chromeos-bootimage", flash terrador and verify terrador boots to kernel. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia14f76e9cb0df64961d46f4b61b39439e56f6a8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41995 Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06trogdor: Add board variant checks in KconfigRavi Kumar Bokka
Diffentiate Lazor and trogdor build configuration Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I3ad413ea6e658e939796bebdff8c1e0dd76417cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/42730 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06mb/google/volteer: Enable HotPlug on PCIe root port for the SD expressnick_xr_chen
Enable HotPlug for the PCIe root port that the SD express is on so the OS can re-train the link without needing a reboot if it goes down unexpectedly at runtime. BUG=b:156879564 BRANCH=master TEST=enable HotPlug on Volteer Root Port 7 (SD express) and check in linux that it is identified as a HotPlug capable root port Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: Ie9d427dd297567f06123119a670b5ed2e1f73701 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42897 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06mb/amd/mandolin: Drop SPD eeproms in devicetreeKyösti Mälkki
Even with previous platforms, these entries were not utilised for raminit. Change-Id: I9a9a1a292bad8c4c89cbacb826c80f4098cae00f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-06mb/google/volteer: Rename remaining pmc_mux/con to connPatrick Georgi
CB:43090 renamed con to conn to avoid issues when building on Windows. CB:42905 introduced more uses of the old name. Adapt the latter to comply with the former. Change-Id: I723141add5452fc541f67cb8591793f2d64cc231 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43141 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>