summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2018-03-21mb/google/octopus: Create bip variantJustin TerAvest
2018-03-21mainboard/google/kahlee: Update GPIOs based on board IDMartin Roth
2018-03-21mb/google/poppy/variants/nami: change type of board_sku_id() to uint32_tZhuohao Lee
2018-03-21mb/google/octopus: Enable TPM on GSPIRavi Sarawadi
2018-03-21mb/google/poppy/variant/nautilus: Enable CABC feature as defaultSeunghwan Kim
2018-03-21mb/google/kahlee: Add register address mapping for FCH MISCAkshu Agrawal
2018-03-20mainboard/google/kahlee: Initialize EC earlier in the bootblockMartin Roth
2018-03-19mb/google/octopus: Configure PERST_0 pinJustin TerAvest
2018-03-19mb/google/octopus: Fix GPIO config for DRAM_IDsJustin TerAvest
2018-03-19mb/google/poppy: Config GPIO for DMIC by different sku idamanda_hwang
2018-03-19mb/google/octopus: Configure PCH_WP_OD early.Justin TerAvest
2018-03-19mb/google/fizz: Enable VMXShelley Chen
2018-03-19soc/amd/stoneyridge/southbridge.c: Remove configure_stoneyridge_uartRichard Spiegel
2018-03-17mb/google/octopus: Do not configure GPIO_149 as GPOFurquan Shaikh
2018-03-16soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin arrayFurquan Shaikh
2018-03-16mb/google/eve: Update DPTF parametersDuncan Laurie
2018-03-15mb/google/poppy/variants/nami: Add gpio-keys ACPI node for PENHShelley Chen
2018-03-15mb/google/poppy/variants/nami: Use GPP_B4 as Touchscreen Power EnableShelley Chen
2018-03-15mb/google/octopus: Enable audio components.Shamile Khan
2018-03-14mb/google/poppy/variants/baseboard: Add gpio-keys ACPI node for PENHNicolas Boichat
2018-03-14mb/google/zoombini/variants/meowth: Make FPMCU interrupt level-triggeredVincent Palatin
2018-03-14mainboard/google/meowth: Enable System Agent dynamic frequencyLijian Zhao
2018-03-13mb/google/octopus: Add yorp variantJustin TerAvest
2018-03-13mb/google/poppy/variants/nautilus: Enable SAR configsFurquan Shaikh
2018-03-13mb/google/poppy/variants/nami: Use internal pulldown for MEM_CONFIG_4Furquan Shaikh
2018-03-12mb/google/octopus: Fix lpddr4 skusJustin TerAvest
2018-03-12mb/google/zoombini/variants/meowth: change gpios to no-connectsNick Vaccaro
2018-03-12mb/google/poppy: Clear memory_params before initializing themNicolas Boichat
2018-03-10meowth: Add SAR Sensor in devicetreeGwendal Grignou
2018-03-09mb/google/zoombini: re-enable software syncCaveh Jalali
2018-03-09mb/google/poppy/variants/nami: Fix typo in nami MakefileFurquan Shaikh
2018-03-09mainboard/google/kahlee: Set GPIO 40 to inputMartin Roth
2018-03-09mainboard/google/kahlee: Disable Bayhub part on board_id 0Martin Roth
2018-03-08mb/google/poppy/variants/nami: Define smbios_mainboard_sku to return SKU IDsShelley Chen
2018-03-08mb/google/kahlee: Do not define SIO_EC_ENABLE_COM1Daniel Kurtz
2018-03-08mb/google/poppy : Get SKU_ID from EC for Nami/Vayneamanda_hwang
2018-03-08google/scarlet: Adjust K&D power sequence from softwareBrian Norris
2018-03-08mb/google/octopus: Add gpio configs for communitiesShaunak Saha
2018-03-08mb/google/octopus: Add device tree settingsShamile Khan
2018-03-08mb/google/nautilus: Correct LINK FREQ of imx258 sensorAlan Chiang
2018-03-08mb/google/kahlee: Add SKU supportSimon Glass
2018-03-08mb/google/poppy/variants/nami: Add WACOM EMR supportjasper lee
2018-03-07mb/google/poppy/variants/nami: Add SPD files for namijasper lee
2018-03-07mb/google/zoombini/variants/meowth: enable SAR powerNick Vaccaro
2018-03-07mb/google/poppy/variant/nautilus: Configure GPP_B0 for WLAN wakeSeunghwan Kim
2018-03-07mb/scaleway/tagada: populate smbios informationJulien Viard de Galbert
2018-03-07mb/scaleway/tagada: Override baudrate with bmcInfoJulien Viard de Galbert
2018-03-07mb/scaleway/tagada: Implement console loglevel override using bmcInfoJulien Viard de Galbert
2018-03-07mb/scaleway/tagada: Add bmcInfo interfaceJulien Viard de Galbert
2018-03-07mb/google/poppy/variants/nami: Add memory detection logicShelley Chen
2018-03-07mb/google/poppy/variants/nami: Add spd filesShelley Chen
2018-03-06google/snappy: enhance CCD type-A USB 2.0 phy strengthKevin Chiu
2018-03-06mainboard/google/fizz: Check HDMI HPD and DisplayPort HPDDaisuke Nojiri
2018-03-06mb/google/fizz: Skip FSP init for UART 0Duncan Laurie
2018-03-06Revert "mainboard/google/meowth: enable PCH iSCLK"Lijian Zhao
2018-03-05mb/google/poppy: Allow use of optional secondary SPDFurquan Shaikh
2018-03-05mb/google/poppy/variants: Set pch_trip_temp to 75CFurquan Shaikh
2018-03-02sb/intel/common: Fix conflicting OIC register definitionNico Huber
2018-03-02mb/google/zoombini/variants/meowth: Enable NVMeBora Guvendik
2018-03-02mb/hp: Enable additional ports at WWAN slot for ElitebooksIru Cai
2018-03-02mainboard/google/zoombini/variant/meowth: enable speed shiftNick Vaccaro
2018-03-01mb/google/reef/sand: Override USB2 phy settingsKatherine Hsieh
2018-03-01mainboard/google/meowth: Turn on DBC over USB3.0Lijian Zhao
2018-03-01mb/google/poppy/variant/nautilus: Change SlowSlewRateForSa settingSeunghwan Kim
2018-03-01mb/google/reef: Override USB2 phy settingsTim Chen
2018-03-01mb/google/coral: add usb2 phy setting override for some variantsSheng-Liang Pan
2018-03-01mb/{amd/gardenia,google/kahlee}: Initialize GPIOs earlierJustin TerAvest
2018-03-01mb/scaleway/tagada: set SMBIOS Enclosure Type in KconfigJulien Viard de Galbert
2018-02-28mainboard/google/zoombini: consolidate SPD makefilesNick Vaccaro
2018-02-28mb/google/poppy/variants/nami: Enable elan touchscreenCrystal Lin
2018-02-28mb/google/octopus: Add LPDDR4 memory initRavi Sarawadi
2018-02-27sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common locationArthur Heymans
2018-02-26mainboard/google/zoombini: enable 4 coresNick Vaccaro
2018-02-26mb/siemens/mc_bdx1: Avoid dereferencing a NULL pointerWerner Zeh
2018-02-23mb/google/fizz: Enable PCIe port 11, 12Zhongze Hu
2018-02-22mb/google/kahlee/mainboard.c: Fix mainboard_picr_dataRichard Spiegel
2018-02-22mb/google/kahlee: Use GPIO macros for baseboardJustin TerAvest
2018-02-22mb/google/kahlee: Correct bad gpio entryJustin TerAvest
2018-02-22mainboard/google/meowth: enable PCH iSCLKLijian Zhao
2018-02-22mainboard/google: Disable big, pit, and ryu ec buildsMartin Roth
2018-02-22mainboard/google/zoombini: Add config for meowth audioSathyanarayana Nujella
2018-02-21mainboard/google/kahlee: Add tis_plat_irq_statusChris Ching
2018-02-20mb/google/poopy/variants/nami: Add Pmax settingGaggery Tsai
2018-02-20mb/google/kahlee/OemCustomize.c: Disable bank interleaveRichard Spiegel
2018-02-20mb/compulab: Mark Intense-PC as single board computer in board_info.txtJonathan Neuschäfer
2018-02-20mb/emu/spike-riscv: Move usage instructions into Kconfig helpJonathan Neuschäfer
2018-02-17mb/google/fizz: Wait until display is readyDaisuke Nojiri
2018-02-17soc/amd/stoneyridge: Normalize GPIO initJustin TerAvest
2018-02-16mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45WNaresh G Solanki
2018-02-16mb/scaleway/tagada: Remove unused board_idJulien Viard de Galbert
2018-02-16mb/scaleway/tagada: Update GPIO configurationJulien Viard de Galbert
2018-02-16mb/scaleway/tagada: Remove eMMC configurationJulien Viard de Galbert
2018-02-16mb/scaleway/tagada: Remove memory down optionJulien Viard de Galbert
2018-02-16mb/scaleway/tagada: Update HSIO configurationJulien Viard de Galbert
2018-02-16mb/scaleway/tagada: Update device treeJulien Viard de Galbert
2018-02-16mb/scaleway/tagada: Copy intel/harcuvar and renameJulien Viard de Galbert
2018-02-16mb/google/zoombini/variants/meowth: enable FPMCU interruptVincent Palatin
2018-02-16google/gru: Fix GPIO_WP pull and polarity for ScarletJulius Werner
2018-02-15mb/google/poppy/variant/nautilus: Enable and configure DPTFSeunghwan Kim
2018-02-15mb/intel/glkrvp: Add FPF_STATUS section in fmd fileHannah Williams