summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2018-12-27mb/google/hatch: Add SMI handlersAamir Bohra
Add SMI handlers for below SMI events: 1. eSPI SMI event. 2. ACPI enable/disable SMI event -> Add support for EC to configure SMI mask on ACPI disable. -> Add support for EC to configure SCI mask on ACPI enable. 3. Sleep(S3/S5) SMI event -> Add support for EC to configure wake mask for S3/S5 event Change-Id: I7127b44712cd89b3d583e9948698870ca0c64b2b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add HPD GPIO support for displaysMaulik V Vaghela
Adding hot plug detect GPIO support for external Type-C display in event for cable connect/disconnect. Change-Id: If9d52dc0f9916f761c8fdd88c76968aaf663e650 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30365 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-25mb/google/hatch: Modify hatch SPI flash layoutV Sowmya
This patch modifies the hatch flash layout to support IFWI 1.6 with the following regions, Flash Region 0: Descriptor [0x0 - 0xFFF] Flash Region 1: IFWI (consist of ME and PMC FW) [0x1000 - 0x3FFFFF] Flash Region 2: BIOS [0x1400000 - 0x1FFFFFF] Change-Id: I3d05fb50e970737a2552b85d6aebed943bf2b6cb Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30413 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-25mb/google/hatch: Enable EC LPC interface and configure IO decode rangeAamir Bohra
Enable EC LPC interface and configure below LPC IO decode ranges: 1. 0x200-020F: EC host command range. 2. 0x800-0x8FF: EC host command args and params. 3. 0x900-0x9ff: EC memory map range. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ie5d92df80d6b3a5913d0cbe78c1b8eefb5269d4a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add SoC and EC asl files in DSDTAamir Bohra
This implementation adds below code: 1. Add SOC ACPI code in dsdt.asl -> platform.asl -> globalnvs.asl -> cpu.asl -> northbridge.asl -> southbridge.asl -> sleepstate.asl 2. Add chromeos.asl in dsdt.asl 3. Add EC ACPI code in dsdt.asl -> superio.asl -> ec.asl 4. Remove config for WAK/PTS ACPI method as chromeec doesn't implement those. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Icf1b1d7e34a7e863139c3583903f3b1e2cdc8da6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add EC trigger events and acpi configsAamir Bohra
This implemetation adds EC SCI, SMI, S5/S3 wake trigger events. Also adds the EC specific ACPI configs to enable support for ALS, EC PD device and PS2 keyboard device. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I3a86f609c269cb59e546fc7ba4ba032e5ea8341a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30281 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-24mb/asus/p5qpl-am: Add mainboardArthur Heymans
This mainboard has the BSEL straps hooked up to the SuperIO similar to the ASUS P5GC-MX and might therefore require a restart. Tested: - FSB 800, 1067 and 1333MHz CPUs - USB - Ethernet - Serial - 2 DIMM slots - SATA - Libgfxinit (VGA) TESTED with SeaBIOS (sercon disabled) and Linux 4.19. Change-Id: Id845289081751ff8900e366592745f16d96f07c0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-12-24drivers/aspeed/ast: Select `MAINBOARD_HAS_NATIVE_VGA_INIT`Tristan Corrick
Any board that uses the AST driver will have support for native graphics init. So, select the option in the driver instead of every board. Change-Id: I2bf42c168d1ffdda11857854889b74953abd7e40 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-24Revert "mb/google/octopus/variants/fleex: Update Charger throttling settings"Sumeet Pawnikar
This reverts commit 969ed357f823659a6861a2ca38f3ad9d7b58f949 Reason for revert: According to partner issue b:112448519 comment#80, it impacts skin temperature specifications. Change-Id: I7603c3816f34adebc1f67eff6fad214557544022 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-12-23mb/google/hatch: Enable IGD (Integrated GFX Device)Maulik V Vaghela
This patch ensures following 2 features 1. Enable IGD controller in devicetree.cb 2. Pass required FSP UPD to perform internal graphics initialization Change-Id: I607199590d793a70e1e20bb3241fc34467aa829d Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-23mb/google/hatch: Add memory init setup for hatchAamir Bohra
This implementation adds below support: 1. Add support to read memory strap. 2. Add support to configure below memory parameters -> rcomp resistor configuration -> dqs mapping -> ect and ca vref config 3. Include SPD configuration BUG=b:120914069 BRANCH=None TEST=USE="-intel_mrc -bmplk" emerge-hatch coreboot Change-Id: I9bda08bd0b9f91ebb96b39291e15473492a6bf19 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30248 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-22mb/google/hatch: Enable Elan TrackpadShelley Chen
BUG=b:120914069 BRANCH=None TEST=USE="-intel_mrc" emerge-hatch coreboot Change-Id: I91db5745d1db16ab4b2fbb7f8c415bd7c1eb29e9 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-22mb/google/hatch: Fixes to initial hatch mainboard checkinShelley Chen
Incorporating some feedback to initial hatch mainboard checking (CL:30169) that came in after the CL merged. Updated the chromeos.fmd with the following, * SI_ALL = 3MB * SI_BIOS = 16MB BUG=b:20914069 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a -v Change-Id: I4e311c68873f10f71314e44d3a714639a06dbee8 Signed-off-by: Shelley Chen <shchen@google.com> Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30296 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-22cbmem: Always use EARLY_CBMEM_INITKyösti Mälkki
Wipe out all remains of EARLY/LATE_CBMEM_INIT. Change-Id: Ice75ec0434bef60fa9493037f48833e38044d6e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-22emulation/qemu-{i440fx,q35}: Don't migrate globalsArthur Heymans
Migration of globals is not needed as there is no real CAR that gets torn down. Change-Id: Id24642b49fab811e59291747eda8632cd49d83d0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-22Revert "mb/google/octopus: Add custom SAR values for Bobba"Justin TerAvest
This reverts commit a914152fa6072c443ccd18de22412b47a228e754. Reason for revert: According to the partner on this project, custom values like this are no longer necessary. Change-Id: I393eb4997f58abe0f77161999474994f06741519 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/c/30347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-21mb/google/sarien: Disable pcie interface for wwanLijian Zhao
WWAN chip support 3 interfaces as pci express, USB 2.0 and USB 3.0, the usgae of Sarien choose to only use USB interface but not over pci express, so totally disable pci express root port 12. BUG=b:1246720 TEST=Boot up into OS with WWAN attached, cold boot and warm boot 10 cyles can still device can be listed under lsusb. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ic4da393c0c0d903848111e1c037c2730c86afa7d Reviewed-on: https://review.coreboot.org/c/30350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2018-12-21mb/intel/coffeelake_rvp: Update default configurationWonkyu Kim
Report correct board information for Whiskeylake RVP to OS. Use short board name like other RVP as it's used for firmware version check in auto test. Change-Id: I3f7c95f136e39b978a335cc7855cac819043db7c Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-on: https://review.coreboot.org/c/30318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-12-21mb/google/poppy/variants/atlas: Remove duplicate entry of dptf_enableSumeet Pawnikar
Remove duplicate entry of dptf_enable. BRANCH=None BUG=None TEST=None Change-Id: I3ddd6a702180624d31c5c58c71acdce8f627c925 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-21mb/google/poppy/variants/nami: Add micron_dimm_MT40A512M16TB-062EJ SPDFrank Wu
Add SPD file for micron_dimm_MT40A512M16TB-062EJ (ram id: 12) BUG=b:121217853 BRANCH=firmware-nami-10775.B TEST=emerge-nami coreboot chromeos-bootimage Change-Id: I45e6a7a183556fb085f5442cd6bb429d79ef4235 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-21mb/google/poppy/variants/nami: Add micron_dimm_MT40A256M16LY-075F SPDIvy Jian
Add SPD file for sdp micron_dimm_MT40A256M16LY-075F (ram id: 11) BUG=b:120884302 BRANCH=firmware-nami-10775.B TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Icf731bfefd550e9b94b6404bc870d4d76451deb1 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-21mb/pcengines/alixxx: Drop boardsArthur Heymans
These boards are still using LATE_CBMEM which was agreed upon to be removed after release 4.7. It is now more than 1 year later and they still linger around. The work and review to bring those boards up to date can happen on the 4.9 branch and then squashed and merged back into mainline when done. Change-Id: Iede79ef50681f769a47ce3d66b335dae92aef56b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-21mb/google/hatch: Enable H1 TPM support over SPI interfaceAamir Bohra
Add code support to enable H1 TPM interfaced to SOC on GSPI0. The TPM interrupt is mapped to GPP_C21. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ib63a0b473f632d91745102ebd01993e8d65b9552 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30210 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-21mb/google/hatch: Clean up gpio definitions in hatch variantAamir Bohra
This implementation cleans up gpio configuration functions and limit definition to baseboard only for now, until variant specfic overides are needed. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I563f6b97812b32d6e3d99e3df512dc112da78aea Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30291 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-20Revert "mb/google/poppy/variants/nocturne: Add DMIC properties to ACPI DSD"Jenny TC
This reverts commit 999b916015ea0558e3821bdb51501b43a60b5ed6. The DMIC doesn't have an ACPI id. The patch which enables ACPI device with id DMIC may create conflict in the feature. Also the ACPI id "DMIC" doesn't comply with ACPI naming conventions. The issue for which the patch was introduced, is already addressed in kernel DMIC driver and the patches are upstreamed in to the Linux kernel. Change-Id: I42cb076700dcb5906599471bebfcd5b265b17644 Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/c/30151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-12-20mb/intel/kblrvp: Change HDA verb table selection logicPraveen hodagatta pranesh
All the kaby lake variants uses HDA verb table except RVP8, hence unselect SOC_INTEL_COMMON_BLOCK_HDA_VERB for RVP8 and enable for other variants by default. BUG=None TEST= Tested on KBL RVP11 and verified the audio functionality. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I64d18ab62cfc08b5560dbcf1b77e975eb68c8d30 Reviewed-on: https://review.coreboot.org/c/30267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com>
2018-12-19zoombini: remove support for deprecated zoombini boardBob Moragues
Change-Id: Iab2737940f07afb4f5a29ff50e6cb2a22027c51b Signed-off-by: Bob Moragues <moragues@chromium.org> Reviewed-on: https://review.coreboot.org/c/30094 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19mb/google/octopus: Override emmc DLL values for YorpBora Guvendik
New emmc DLL values for Yorp. BUG=b:120561055 BRANCH=octopus TEST=Boot to OS, chromeos-install, mmc_test Change-Id: I771c959a15959160224f056c0a16aa65bfbba94e Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/30073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-12-19mb/ocp/wedge100s/romstage: Workaround broken platform statePatrick Rudolph
Sometimes the platform boots in an invalid state, that will cause FSP-M to fail. As a board_reset() doesn't fix it, issue an full_reset() as soon as the IA32_FEATURE_CONTROL MSR is locked at beging of romstage. Tested on wedge100s. After full reset the system behaves as normal. Change-Id: I1a382b8fb650311b0c24b48e0986d22edfa2d261 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-12-19mb/google/sarien: Enable DMI/SATA power OptimizeLijian Zhao
Turn on power optimizer of PCH side DMI and SATA controller. BUG=N/A TEST=Build and boot up into sarien platoform, able to finish 100 cycles of s0ix. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I41da2b4106d683945cdc296e2a77311176144f43 Reviewed-on: https://review.coreboot.org/c/30212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-19mb/google/kahlee: Remove board_id check for Liara 2T timingsMartin Roth
Use 2T memory timings on Liara for all board IDs. BUG=b:116082728 TEST=Build & boot on Liara Change-Id: I5814e63db35cf7761f4f20792b0f3cf4120a1b60 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/30285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-12-19mb/google/variant/nocturne: set CONFIG_NO_FADT_8042Nick Vaccaro
Set CONFIG_NO_FADT_8042 to avoid probing for the 8042 controller. This speeds up boot on nocturne by 1.3 seconds: Before change: [2.162266] EXT4-fs (mmcblk0p3): mounting ext2 file system using the ext4 subsystem After change: [0.867735] EXT4-fs (mmcblk0p3): mounting ext2 file system using the ext4 subsystem BUG=b:120960844 BRANCH=none TEST=build, flash, and boot nocturne; check dmesg to verify that boot is faster and that you don't see the following log in dmesg: [0.671501] i8042: Probing ports directly. Change-Id: I62a16e6de5e74fa17970d9967f6d1628497ec1d3 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/30283 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19google/rambi: disable TXE in devicetree for all variantsMatt DeVillier
The TXE PCI device serves no function under Linux, and doesn't work properly under Windows, so disable/hide it from the OS. Test: Boot Windows 10 on google/squawks, verify TXE not visible under Device Manager. Change-Id: Idaa152e15106b826fd5aa787090acd45719f4228 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-19google/cyan: set touchscreen GPIO to non_maskableMatt DeVillier
Commit 73b723d [google/cyan: Switch Touchpad and Touchscreen...] in additon to changing the touchpad/touchscreen interrupts from edge to level triggered, also marked them as maskable. This not only broke the touchpad functionality, but caused issues with the touchpad as well. Revert the touchpad to being non_maskable for all cyan variants with a touchscreen. Test: boot GalliumOS on google/cyan with a range of kernel versions (4.15.18, 4.16.13, 4.17.x, 4.18.x) and verify touchscreen functional, touchpad working properly (not jittery) Change-Id: I0e0357912f9404af7d0f4e7938a1a94c74810b37 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-19mb/asus/maximus_iv_gene-z: Select NO_UART_ON_SUPERIOTristan Corrick
This board doesn't have a UART on the super I/O. Selecting this option speeds up boot time from ~493 ms to ~416 ms. Change-Id: I1d84f373831381da79022638e1082adf68f47aad Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-19mb/sifive/hifive-unleashed: remove the definition of MAX_CPUSXiang Wang
When I debug with HiFive Unleashed, I found that hart 4 could not be running. Then find the duplicate MAX_CPUS definition. The correct MAX_CPUS is located in src/soc/sifive/fu540/Kconfig Change-Id: I583f6ba548daeeb6c7e341dc3fa8817e7dec5697 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/c/30179 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19smsc/sch5147: Implement ACPI handling of a few LDNArthur Heymans
Change-Id: Ide30a7396b6248e2037041e177dc8514533718a4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-19mb/lenovo/thinkcentre_a58: Add mainboardArthur Heymans
The following was tested: - Using two DDR2 DIMMs - S3 sleep and resume (on SeaBIOS it needs sercon disabled) - Ethernet NIC - Libgfxinit (native res and textmode) - SATA - USB - 800MHz FSB CPU (Pentium(R) E5200 @ 2.50GHz) - PS2 Keyboard - Serial output TODO: - Add ACPI code for SuperIO devices (done in a follow-up patch) - Add documentation TESTED with SeaBIOS (sercon disabled), Linux 4.19 Change-Id: I483e1143e4095b8a58fed142d31ca7f233a854e2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30239 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19mb/foxconn/g41s-k: Don't reprogram inherited subsystemidArthur Heymans
Change-Id: I85b5aef758a1ed30c46ed0adabec3293edb0f3fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2018-12-19mb/google/sarien: Use meaningful SATA modeLijian Zhao
Define SATA mode to AHCI mode instead of 0, make devicetree more readable. BUG=N/A Change-Id: I903545d9487c1409f9008407fe5bee6aa4959b98 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-19mb/asrock/h81m-hds: Allow "keep state" for power_on_after_failTristan Corrick
When I added the cmos.layout file, I did not realise that the southbridge code cleverly emulated the "keep state" option. Tested on an ASRock H81M-HDS. The `Keep` option works as it should. Change-Id: I908e59d1e1eedefa6610e7f980afc3c04390a519 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-19mb/google/sarien: Enable ELAN Touchpad and Disable ALPS TouchpadChris Zhou
Enable ELAN Touchpad and Disable ALPS Touchpad BUG=b:119628524 BRANCH=master TEST=ELAN Touchpad can work normally. Change-Id: I7839459a70768fa95ba4871b1915d2ea86419bbb Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-12-19mainboard: Remove useless include <device/pci_ids.h>Elyes HAOUAS
Change-Id: I4ee3cc42302c44dc80ae1f285579a4d1775aec16 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-12-19mb/google/octopus/var/ampton: Tune I2C AudioJustin TerAvest
The previous settings caused the I2C frequency for the audio bus to be too high, at 417kHz. The settings in this commit correct the frequency to 396kHz. BUG=b:119423345 Change-Id: Ibed886e6e1b0df4df6b87f6291e515364b3bf718 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/c/30129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-18Revert "google/sarien: Increase BIOS region to 28MB"Lijian Zhao
This reverts commit ad41f5512306d118047d2f7243678ddb32b4b06b. Reason for revert: <Issue have seen on EVT platform that vboot always fail to verify keyblock A> BUG=b:121169122 Change-Id: I2790ef3463a228008b614498009fbdc8b493cfb0 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30286 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-18mb/asus/kgpe-d16: Set ASpeed GPIO SPD mux lines during bootTimothy Pearson
When the BMC firmware module is installed on the KGPE-D16, the RAM SPD multiplexer lines are disconnected by hardware from the SP5100 GPIOs and attached to BMC GPIO lines instead. Set the BMC GPIOs to match the state of the SP5100 GPIOs during RAM setup. Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac5 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/19820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-18mb/google/sarien/variants/arcada: Enable touchpad and touchscreenCasper Chang
Enable Elan touchpad and WACOM touchscreen BUG=b:119924134, b:120103010 BRANCH=master TEST=Verify touchpad and touchscreen on arcada work with this change. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I3dcdb4eeeb32766e64553d9e69e6b7e2b5ba85aa Reviewed-on: https://review.coreboot.org/c/30146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-18mb/google/kahlee/liara: Document why IOMMU is disabledJonathan Neuschäfer
Commit d80884ea5a ("mb/google/kahlee: Disable IOMMU") disabled the IOMMU in all kahlee variants, but omitted the explaining comment only in liara's devicetree.cb. Copy this comment to liara. Change-Id: I564013a16217445003467e2a0579abd50597b205 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-18src/mb/google/*/Kconfig: Consistently use $(...) for variablesJonathan Neuschäfer
Using ${...} in some places is slightly confusing. Fixes: 395cbb4f97 ("mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetree") Change-Id: Id0856a10d92786a41d45ca697945699f6f4c1f4c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-18mb/google/poppy/variants/nami: Add sku_ids for SyndraAmanda Huang
Sync'ing the sku_ids list in the master sku sheet. BUG=b:112876867 Change-Id: I658e8dc67679b5b528ab267861a1151f50e42414 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-17mb/google/octopus/variants/fleex: Update Charger throttling settingsSumeet Pawnikar
Update dptf settings for Charger throttling. Also, update Power Limit1 minimum value setting from 4.5W to 3W. BUG=b:112448519 BRANCH=octopus TEST=Built and tested on Fleex system Change-Id: I8c2a796ff28254ebef28ed5745b344f925d6e649 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-12-17mb/google/octopus: Add custom SAR values for BobbaJustin TerAvest
Bobba would prefer to use different SAR values per sku-id for regulatory compliance. This commit uses the newly added interface for custom wifi SAR CBFS filenames. CQ-DEPEND=CL:*729429 BUG=b:120958726 BRANCH=octopus TEST=build Signed-off-by: Justin TerAvest <teravest@chromium.org> Change-Id: I354382d651d65d533459f0ca460ca6fd6de547fd Reviewed-on: https://review.coreboot.org/c/30223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-17mb/google/poppy/variants/nami: perform PL2 setting for bard/ekkoRen Kuo
According to bard/ekko cpu types, PL2 need to set the values 1. KBL_U PL2 is 25w. 2. KBL_R PL2 is 29w. BUG=b:120874861 TEST=power on and check the DUT can boot up well Change-Id: I5f9d672c4244c363a7cfb362653663a065259fc0 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-17siemens/mc_apl4: Enable RTC RX6110SA on this mainboardUwe Poeche
Enaebl the RTC driver to be used on mc_apl4. Change-Id: Ib8d2a9f6b8cea47cd10db4dfcc59eec1b21c7993 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-12-17siemens/mc_apl4: Enable LVDS Display on mc_apl4Uwe Poeche
Enable PTN3460 chip initialization to get LVDS attached LCD working on mc_apl4. Change-Id: I3ccf5398f16831db321eba846d6b041daadf31dd Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-12-17siemens/mc_apl4: Add GPIO configurationUwe Poeche
Add GPIO configuration to match the hardware of mc_apl4. Change-Id: Ia69603f42c57c1cc682550b8eeeab42fbac27563 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/30128 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-15mb/{intel,google}/{icelake_rvp,dragonegg}: make use of cpu_get_cpuid() ↵Subrata Banik
helper function This patch replaces cpuid(1) references from icelake mainboard with x86 cpu common code library functions cpu_get_cpuid(). - cpu_get_cpuid() -> to get processor id (from cpuid.eax) Change-Id: Ia12d95d911dd6ee60a3a35937264fef668ad9e35 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2018-12-14cheza: Add board reset via Chrome ECJulius Werner
This patch implements board reset on the Cheza board. The real board reset used by the operating system uses the PMIC, but unfortunately the PMIC needs to be configured right for that to work. The PMIC configuration currently happens in the Qualcomm blob (QcLib) that is run from romstage, but vboot needs to be able to reboot during verstage already. Porting all the PMIC initialization code to run in the bootblock seems excessive (and at odds with the goal of doing as little as possible before verification), so we'll just do a little hack and ask the EC to perform a cold reset instead. For vboot purposes, this should work just as well. BUG=b:118501305 TEST=Hacked vboot code to call vboot_reboot(), confirmed that board reset and came back up as expected. Change-Id: I3858d95f481884a87c243d4fa3d6369c1e8a5a2c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/29849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-14mb/google/octopus: Override emmc DLL values for BobbaBora Guvendik
New emmc DLL values for Bobba. BUG=b:120561055 TEST=Boot to OS, chromeos-install, mmc_test Change-Id: I5a0d9587a91b3c71c042cd8ea360c816ea29fb91 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/30176 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-14google/grunt: Correct mismatch character hynix-H5AN8G6NAFR-UH.spd.hex SPD ↵Lucas Chen
file Module Part Number Correct Ram_ID=0b0000 SPD Module Part Number mismatch last alphabet 'C' to "H5AN8G6NAFR-UHC". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I4f4b83589ad6b53c0a24f2637f0fe8b92a1168e3 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-14google/grunt: Correct mismatch character hynix-H5ANAG6NAMR-UH.spd.hex SPD ↵Lucas Chen
file Module Part Number Correct to add Ram_ID=0b0001 SPD Module Part Number mismatch last alphabet 'C' to "H5ANAG6NAMR-UHC". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I4d320b2e10c4865456a9a9ccb400db5dd9256b3e Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30177 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-13mb/google/hatch: Creating skeleton directories and filesShelley Chen
Creating skeleton files and directories in mainboard for the new Hatch board. This is to facilitate development for different parties involved. BUG=None BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I5fc60c178f83034abe5d846d0f4169072b66f448 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2018-12-12cheza: board-level GPIO supportT Michael Turney
Change-Id: I64e79904c7ad95091ea29d9f80444c4e3b493471 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/29298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-12mb/google/octopus/ampton: Fix the TRACKPAD_INT_ODL GPIO configurationKarthikeyan Ramasubramanian
Update the TRACKPAD_INT1_1V8_ODL GPIO configuration so that it acts as a wakeup source BUG=b:119598593 BRANCH=octopus TEST=Ensure that the system wakes up on trackpad events. Ensure that the suspend_stress_test runs successfully for 25 iterations. Change-Id: I28292682cf9c8037abb87d265e49a60139550db2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/30171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-12cheza: TPM/EC enable Kconfig in mainboardT Michael Turney
Change-Id: I15cfbbab15b940641c3952f2cfb4b11c37574816 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/29299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-11mb/google/octopus/variants/meep: Add 20ms reset delay for WACOM deviceTony Huang
Add reset delay in power resource to prevent bind to fail after unbind. BUG=b:119795901 BRANCH=master TEST=emerge-octopus coreboot, verified that WACOM touchscreen can re-bind successfully. Change-Id: Idcf02b1c931ed64951995403ec9ebe6b8f2db31d Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30099 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-11mb/google/sarien: Disable unused SATA portsLijian Zhao
Disable SATA port 0 and port 1 as that's not used as SATA on platform. BUG=N/A TEST=Build and boot up fine on google arcada board. Change-Id: I1b8801f7a0f9b7847b85d7c315fa0a2093b32f70 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2018-12-11mb/google/sarien: Disable PCH Gigabit LANLijian Zhao
There's no LAN connection on Arcada board, so disable PCH GBE. BUG=N/A Change-Id: I07c66df50dbe9fefd95a67b5af9e3f61ce6a18aa Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2018-12-11mb/intel/x200: Add data.vbtArthur Heymans
There are 2 vendor BIOS's for the Lenovo X200 with the difference being the settings in the VBT blob to accommodate different backlight frequencies. Linux however sticks with the setting set by the firmware. Tested on Lenovo X200 with CCFL backlight. Change-Id: I4c4a7011ce03cdd511fa2e2160c2f006ba2707ba Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29904 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-11mb/google/poppy/variants/nami: Modify SPD for hynix memory partRen Kuo
correct memory part name form hynix_dimm_H5ANAG6NCMR-VKC to hynix_dimm_H5AN4G6NAFR-UHC BUG=b:113983573 BRANCH=Nami TEST=emerge-nami coreboot chromeos-bootimage Change-Id: I0c33343eb1269919fba324333897805da1d1ff9b Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-12-10mb/intel/icelake_rvp: Fill Icelake U and Y RVP devicetree parametersAamir Bohra
This implementation configures below parameters: 1. Enable SaGv, isclk. 2. Set Pcie rootport enable, Clock source usage and clkreq. 3. Configure SATA and LPSS controllers parameters. 4. Enable CNVI controller, configure Wifi end device under PCIE RP1. 5. Add TPM device support under GSPI1. Change-Id: I585e82799eea0bad19ad2c94d6b4b3024f930ed4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-10mb/google/octopus: Update the PEN_EJECT GPIO configurationKarthikeyan Ramasubramanian
PEN_EJECT GPIOs are active high and also require an internal pull-up. Update the GPIO configuration appropriately. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the stylus tools open on pen eject. Ensure that the system can enter S0ix and S3 states successfully when the pen is inserted. Ensure that the system wakes on Pen Eject. Ensure that the system does not enter S0ix and S3 states when the pen is placed in its holder. Ensure that the suspend_stress_test runs successfully for 25 iterations with the pen placed in its holder. Change-Id: Ibf9cb214a8ce7561efbb77a7e99d1e386cf064c3 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-10mb/google/sarien: Update GPIOs for next buildDuncan Laurie
Update the GPIOs for the next board build. Mostly minor changes but the polarity change on GPP_E8/RECOVERY on sarien will result in it booting to recovery every time unless using new hardware. For this reason the recovery mode GPIO that is passed to vboot is commented out for sarien. It is only used for testing and currently it is useful to have an image that works on both board versions. Change-Id: I32d84f3010cb4d3968370a03f7e191b1710a50e8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30062 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-10mb/google/sarien: Setup GPIOs again after FSP-SDuncan Laurie
Currently CoffeeLake FSP is incorrectly modifying GPIO pad configuration if specific UPD variables are not set as it expects. This affects the display-related SOC pads with the following UPD variables: UINT8 DdiPortBHpd; // GPP_E13 UINT8 DdiPortCHpd; // GPP_E14 UINT8 DdiPortDHpd; // GPP_E15 UINT8 DdiPortFHpd; // GPP_E16 UINT8 DdiPortBDdc; // GPP_E18/GPP_E19 UINT8 DdiPortCDdc; // GPP_E20/GPP_E21 UINT8 DdiPortDDdc; // GPP_E22/GPP_E23 UINT8 DdiPortFDdc; // GPP_H16/GPP_H17 Until FSP is fixed to not touch the pad configuration this workaround will reprogram the GPIO settings after FSP-S step so they are correct when the OS attempts to use them. This was found in CoffeLake FSP Gold release: https://github.com/IntelFsp/FSP/tree/master/CoffeeLakeFspBinPkg As well as the current top-of-tree for the FSP sources. BUG=b:120686247,chromium:913216 TEST=verify correct GPIO configuration for GPP_E group in the kernel Change-Id: I19550c4347cf65d409de6a8638619270372c4d0a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-09mb/google/octopus/phaser: Fix trackpad GPE wake configurationKarthikeyan Ramasubramanian
Synaptics Trackpad wake event is incorrectly routed to GPE0_DW2_02. The concerned GPIO is not connected and hence wont trigger a wakeup. Fix the GPE wake configuration for synaptics trackpad. BUG=b:120666158 BRANCH=octopus TEST=Ensure that the wake on trackpad works with Synaptics touch pad. Ensure that the system can enter S0ix successfully(run suspend_stress_test -c 25). Change-Id: I87b8c266266280f61700839d428e6f8938b0f72f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30105 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-09mb/google/sarien: Enable LAN clock source usageLijian Zhao
FSP defined a special clock source usage 0x70 for PCH LAN device, update that to google sarien platform. BUG=b:120003760 TEST=Boot up into OS, ethernet able to be listed in ifconfig. Change-Id: I9f945be4f0ce15470ab53f44e60143f3fd0fddf8 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-08google/grunt: Update micron-MT40A1G16KNR-075-E.spd.hex SPD file ModuleLucas Chen
Part Number Correct Ram_ID=0b0011 SPD Module Part Number to "MT40A1G16KNR-075:E" from "4ATS1G64HZ-2G6E1". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I9d582b3753de9a48865eb6eca7e4fbdb31b799ff Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07google/grunt: Update hynix-H5AN8G6NAFR-UH.spd.hex SPD file Module PartLucas Chen
Number Correct Ram_ID=0b0000 SPD Module Part Number to "H5AN8G6NAFR-UH" from "HMA851S6AFR6N-UH". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I1f6e885638589a35334a9a8f905af4877c5d1f91 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07google/grunt: Update micron-MT40A512M16JY-083E-B.spd.hex SPD file ModuleLucas Chen
Part Number Correct Ram_ID=0b0010 SPD Module Part Number to "MT40A512M16JY-083E:B" from "4ATF51264HZ-2G3B2". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I6847a55968260cdbc1588ddeb8d23c515ad87920 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07mb/google/sarien: Enable ISH on arcada, disable on sarienDuncan Laurie
The Intel Sensor Hub was enabled on the wrong variant so this change moves the enable from sarien to arcada. Change-Id: If933623f7dbb45c4805fb61430465236eca19ee8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Li1 Feng <li1.feng@intel.com> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-07mb/google/kahlee: Use new VBIOS if liaraRichard Spiegel
A new liara specific VBIOS updating eDP power sequence is available now, Change Kconfig to use it if board is google liara. BUG=b:120534087 TEST=Build liara, booted, tested eDP test compliance. Change-Id: I444cfa0bd755480e006f11c0d692b25b96129c29 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/30090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-07mainboard/lenovo/t430s: Add ThinkPad T431s as a variantBill XIE
The code is based on autoport and that for T430s Tested: - CPU i5-3337U - Slotted DIMM 2GiB - Soldered RAM 4GiB from samsung (There may be more models here) - Camera - pci-e and usb2 on M.2 slot with A key for wlan - sata and usb2 (no superspeed components) on M.2 slot with B key for wwan - On board SDHCI connected to pci-e - USB3 ports - libgfxinit-based graphic init - NVRAM options for North and South bridges - Sound - Thinkpad EC - S3 - TPM1 on LPC - EHCI debug on SSP2 (USB3 port on the left) - Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from Linux payload (Heads), Seabios may also work. Not tested: - Fingerprint reader on USB2 (not present on mine) - Keyboard backlight (not present on mine) - "sticky_fn" flag in nvram Not implemented yet: - Fn locking in nvram (may not be identical to "sticky_fn") - C-based native graphic init (since T431s has eDP instead of LVDS) - Detecting the model of Soldered RAM at runtime, and loading the corresponding SPD datum (3 observed) from CBFS (the mechanism may be similar to that on x1_carbon_gen1 and s230u, but I do not know how to find gpio ports for that, and SPD data stored in vendor firmware.) Change-Id: Ic8062cacf5e8232405bb5757e1b1d063541f354a Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/30021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-07mb/google/sarien: Set initial I2C bus rise/fall timesDuncan Laurie
Provide rise/fall times as measured on existing boards. This will need adjusted for new boards but provides a starting point that makes I2C clocks look reasonable. Tested by measuring I2C bus speed and rise/fall times with a scope. Change-Id: Ic18010f5efc41dcee8925d696767ba2c44e3df4b Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-12-06rammus: ELAN touchpad I2C special timing requirementkane_chen
According to issue tracker b:119899090. https://partnerissuetracker.corp.google.com/issues/119899090 We modify rammus devicetree.cb .i2c[1] configuration to meet ELAN touchpad I2C special timing requirement. BUG=b:119899090 BRANCH=firmware-rammus-11275.B TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and check touchpad I2C characteristics meet requirement Signed-off-by: YanRu chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ifeb08c2530e6a7674f23f7d48cefa16cfc59cb13 Reviewed-on: https://review.coreboot.org/c/29922 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-06mb/google/sarien/variants/sarien: Enable melf touchscreenChris Zhou
BUG=b:119799550 BRANCH=master TEST=Verify touchscreen on sarien works with this change. Change-Id: I926c988c141628ae2d98206f9eb615d06357a366 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-06lenovo/h8,thinkpads: Re-do USB Always OnNathaniel Roach
Re-write the UAO handling code as it had stopped working (#171) (the flag was not getting read from the RTC properly in SMM) Remove the SMM code as it's not needed (but EC flag won't be set upon entering S3 now) Set the EC flags on boot the same way other flags are set Document bitwise operators for clarity Propagate changes to other Thinkpads (updated X201 to have 2 bits for the flag as it only had 1) Per Nicola Corna's previous commits, 0x0d is set for "AC only" "AC only" does exhibit different behaviour - the USB port is turned on a few seconds after entering S3, rather than < 1 sec, regardless of AC status Tested on X220 Change-Id: If812cd1ef8fb1a24d7fadbe834f574b40cbcd56a Signed-off-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-on: https://review.coreboot.org/c/29565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-12-06mb/lenovo/t520/romstage: Remove unused includesPeter Lemenkov
Tested - Lenovo t520 still builds fine with this patch. Change-Id: I82492c071ca760f0790b992acbdb86021f470cfe Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/30043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-05mb/google/sarien: Enable ISHJett Rink
Turn on the ISH in the device tree. BUG=b:120295222 Change-Id: I0ba08c245d050aebc6eb06055690c422ab9b51c6 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/30034 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05sdm845: Add SPI-NOR flash driverMukesh Savaliya
TEST=build & run Change-Id: Ie404faf37617d2ad792310709ca2063f9a372076 Signed-off-by: Mukesh Savaliya <msavaliy@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/25392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-05mainboard/google/kahlee: Add romstage GPIO initializationMartin Roth
Move the backlight initialization from bootblock to romstage BUG=b:120436919 TEST=Careena backlight is enabled Change-Id: Ia4993b993d37afaf9e23d6f3316ba91053732f1d Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/30039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-05google/sarien: Increase BIOS region to 28MBLijian Zhao
Platform have a 32MB SPI chip, so we can increase the bios region from 16MB to 28MB. BUG=b:119267832 TEST=Build and boot fine on sarien platform. Change-Id: I9bc0fa0f662e5ec64e77f2005dbb2e7edb8b2524 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-05soc/amd/stoneyridge: Name IO061 in ASL appropriatelyMarshall Dawson
AMD traditionally claims the resource at I/O port 61 for the onboard PC-AT speaker. In later designs, the speaker may be omitted in favor of routing the SPKR signal to the codec. Some systems implement neither, and for those it is not correct to identify the resource as a speaker. Modify the EISAID reported to the OS depending on the system design. The default is that port 61 is reported as reserved. In order to report a speaker, add #define in mainboard//dsdt.asl. TEST=check /proc/ioports and iasl -d for both ways using a Grunt BUG=b:117818432 Change-Id: I33aafb187f9fea7b38aae43c399292c7521fcfc4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/30037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-05mb/lenovo/x201/dsdt: Remove duplicated includePeter Lemenkov
Change-Id: Ifb08c903e19ef4e93bdc9cbc9844cb1888a8d2fa Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-12-05mb/lenovo/*/dsdt: Rearrange definesPeter Lemenkov
Sort mainboard-specific defines in the same order as in all other Lenovo boards. This is a purely cosmetic change which just makes diff between boards smaller. Change-Id: I4e379bb727b356fc6010e93de492f6d73f97a750 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-12-05mb/lenovo/*/dsdt: Move mainboard-specific defines out of ec.aslPeter Lemenkov
Most Lenovo mainboards define their own specific defines in dsdt.asl. Let's make it consistent across all Lenovo mainboards. Tested - builds fine. Change-Id: I03fbeb09b25e42af2dfbb220c0f726e6abb73673 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-12-05mb/emulation/spike-riscv: Implement mtime_initJonathan Neuschäfer
This patch lets spike boot to "Payload not loaded" again. Because soc/ucb/riscv/ does not represent a real SoC, but is a dummy directory for emulators, and different emulators might have different memory maps, I moved mtime_init to the mainboard-specific directories for Spike and QEMU. Change-Id: I080f7f81df752e25478bd277637bf894bbee4cb2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/28873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-12-05google/kukui: Support TPMTristan Shieh
Init SPI bus 0 to connect TPM, configure interrupt type of GPIO CR50_IRQ, implement tis_plat_irq_status(), and set up chromeos GPIO table for TPM interrupt. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui. Change-Id: Ieaa6ae65fbfb5ab6323e226e8171dd7a992c3a39 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/29192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-04mb/google/sarien: Enable WWAN detection on ArcadaLijian Zhao
Set GPIO D22 low to get WWAN_PERST#_R asserted. BUG=N/A TEST=Boot up with Arcada board, check WWAN get detected as USB devices through lsusb command. Change-Id: Ie848cd19fdf3b6c4b6abeb5fa3f566e5e4e7e928 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30030 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04mb/google/poppy/variant/nocturne: adjust RcompTarget to fix DRAM corruptionNick Vaccaro
BUG=b:111812662 TEST=flash to nocturne, boot nocturne, run "memtester 1g" and verify it passes. Change-Id: Iefc3957f915a39a47ad6018459e65b70d1b34091 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/29361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-04mb/google/sarien: Define USB devices for ACPIDuncan Laurie
Add the USB device information for the sarien/arcada variants. This includes the ACPI _PLD group definitions for the external ports that indicate which USB2 and USB3 ports share the same physical interface. Change-Id: I0b936127954ba09c61ccb871bfc62ee7d99da263 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 06:13:19 +0000