summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-09-02mb/hp: Enable ExpressCard hotplug in all ElitebooksIru Cai
The MPC.HPCE bit of the ExpressCard root port is not set in vendor firmware, so autoport didn't generate the right pcie_hotplug_map to support ExpressCard hotplug. Also add comments for each PCIe root port. Change-Id: Ic53e36a7192b9bfa8ff9fca57f4556e972e2611b Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/21310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-01intel/i440bx: Move LATE_CBMEM_INIT under mainboardKyösti Mälkki
Some of these will move to EARLY_CBMEM_INIT. Change-Id: Ia969e30ad7097860180bd047eaf81859a42a747c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Keith Hui <buurin@gmail.com>
2017-09-01lippert/toucan-af: Switch away from AGESA_LEGACYKyösti Mälkki
NOTE: Some code was currently left behind that may be required for certain type of board reboots. A followup patch will address this. Change-Id: I8fb89fb82c3a3608bb84b29319eb793605538996 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01lippert/frontrunner-af: Switch away from AGESA_LEGACYKyösti Mälkki
NOTE: Some code was currently left behind that may be required for certain type of board reboots. A followup patch will address this. Change-Id: I3c1258b4e4dcf6fd04f57f5ab59cb1572a7d1fa3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-31google/gru: Support Nefario rev0Philip Chen
Do not assert GPIO1_B3 otherwise BT would be disabled on Nefario. Also, remove DVS support for CENTERLOGIC. BUG=b:64702054, b:63537905 TEST=build coreboot Change-Id: I350db2c080f2e41ae56413f5f895557978ef0ba8 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/21176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-31lenovo/g505s: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Ia65f9ecb62767424744e399a43e4728666fd28b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-31lenovo/g505s: Enable XHCI device in devicetreeKyösti Mälkki
Enabling XHCI is additionally controlled with Kconfig option HUDSON_XHCI_ENABLE. Even when it is enabled, it EHCI debug works on the USB port next to the DVD drive door. Change-Id: I83738da6015f58ecd0819c553d333a176365dc78 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-31lenovo/g505s: Switch from f15rl to f15tnKyösti Mälkki
Support code for Trinity and Richland is identical now. I have also come across a unit with Trinity model CPU, whose CPUID was not listed in f15rl while f15tn already had support for f15rl. Change-Id: Ia869429b75a9b308b4d4a84f16914ca629b1b1b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-30mainboard/google/soraka: Add stop gpio control to touchscreen deviceFurquan Shaikh
BUG=b:64987428 TEST=Verified that touchscreen works on boot-up and after suspend/resume. No power leakage via stop gpio in suspended state. Change-Id: Ia260eb444081dbe1646c90e82c2725661e7306bc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-30mainboard/google/soraka: Remove Atmel TouchscreenFurquan Shaikh
We no longer use this touchscreen device, so get rid of it. BUG=b:64987428 Change-Id: I67af787d231317a80998fb483eed5674de19aeb4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30google/cyan: update SPD functionsMatt DeVillier
Update cyan's SPD-related functions to more closely mirror those of other Braswell boards, in order to simplify the upcoming baseboard/variant setup for Braswell ChromeOS boards. TEST: boot google/cyan, observe SPD correctly identified in cbmem log, RAM-related data correct in SMBIOS tables. Change-Id: Iafe99ec0795764f645e0a91f5b321be5b4c6fd88 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-30drivers/i2c/ck505: Add generic driver to configure clockgenArthur Heymans
Replaces the ics/954309 driver with a more generic version to accommodate clockgens with a different amount of registers. It also features a mask to only touch certain bits of the clockgen. TODO: set appropriate mask for X60/T60 since the datasheets for their clockgens can be found. Change-Id: Ie43c4de7891a39f2f443e78213ecd688134e68d7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-30mb/google/eve: rt5514: Add 16ms delay on dmic initDuncan Laurie
Add a 16ms delay to DMIC init by the kernel driver in order to prevent an audible 'pop' noise when starting to record. BUG=b:63413023 TEST=manual testing to ensure this device property is present in SSDT: Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package () { Package () { "realtek,dmic-init-delay", 0x10 } } }) Change-Id: If9160ce6992153ba49719029de336595bbf4ae72 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/21271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-29mainboard/google/soraka: Tune I2C params (hcnt, lcnt, hold time)Furquan Shaikh
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the frequency does not exceed 400KHz. BUG=b:35948024 TEST=Verified for 25 iterations that the frequency on each bus ranges <= 400KHz. I2C0: 393 - 397 I2C1: 393 - 400 I2C2: 392 - 400 I2C4: 392 - 400 I2C5: 392 - 400 Change-Id: I3e12c75eb7e82a83aa6a6bcfcc11c12f83f2d3d4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-28mb/lenovo/t400/blc.c: Add B141EW05 V3 to whitelistKevin Keijzer
TESTED on Lenovo T400 Change-Id: I365aeb7e997def225c23d3287558bdc4eefa4298 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/21230 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-28google/Bruce: Add Raydium touch screen supportSheng-Liang Pan
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64705535 BRANCH=master TEST=emerge-coral coreboot Change-Id: Ifdea897ef66dd10f29a8a0e72f9406d316fbe8c7 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/21233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-28mainboard/winnet/g170: Add ACPI supportLubomir Rintel
What is present is APIC and legacy interrupt routing and the soft-off sleep state. Other sleep states are missing, so are the SuperIO devices. Boots Linux with and without "noapic" and a Windows XP (installed with factory BIOS, the installer reportedly requires legacy keyboard). Change-Id: Iee3ede8683d1ea51317228d4f782af27043cc945 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Initialize the IRQ routingLubomir Rintel
Initialize IRQ routing for legacy non-PNP OSes the same as the factory firmware would do. Change-Id: I0c7a7d584a2c47471456ab54ef6da815a2dc4e7c Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Add WinNET G170 boardLubomir Rintel
Change-Id: I0d7aba827fb87f69f542edd2f7ac7a66d949f865 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Copy from mainboard/bcom/winnetp680Lubomir Rintel
G170 is a board manufactured by WinNET, used in thin clients including HP Neoware CA19 and IGEL 2110. Copied from mainboard/bcom/winnetp680 which seems to be a similar board with an extra PCI slot. The p680 should probably be moved to winnet/ too, since the board is an OEM WinNET board, with BCom being just a machine that happens to it. Change-Id: I90b89ee634d90cfba2e56cca5b76cfd2bd7a8d0b Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mb/gigabyte/ga-b75m-d3*/acpi: Remove redundant codePatrick Rudolph
Remove obsolete code. The same settings are always done in southbridge. Change-Id: Ic893ddbace73ae8b122c4fb675febc7d1e0b5da9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28AGESA f15: Remove f10 referencesKyösti Mälkki
Vendorcode for f15 also has f10 support, so AMD_AGESA_FAMILY_10 was never selected. Change-Id: I9a026c36ace88f1110a52d7e24d3e6ab36508932 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-28mainboard/google/poppy: Tune I2C params (hcnt, lcnt, hold time)Furquan Shaikh
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the frequency does not exceed 400KHz. BUG=b:35948024 TEST=Verified for 25 iterations that the frequency on each bus ranges <= 400KHz. I2C0: 375 - 400 I2C1: 377 - 400 I2C2: 377 - 400 I2C4: 375 - 397 I2C5: 375 - 397 Change-Id: Ie30e1a12b66c4660b648a585c4dfd66faf004129 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21208 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-27mb/lenovo/*/acpi_tables: Add critical and passive thresholdPatrick Rudolph
Add critical and passive threshold to be advertised in thermal zone 0. Change-Id: Ic75a80994b27ac19651ed52b7fc3c00c65cd9c01 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-25jetway/nf81-t56n-lf: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I6ad0c4cf2f0398f0b1efac1282822acf0d4a3610 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25amd/union_station: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I706de64ae5d940df70701c8b9dd717f8e212cd0e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25amd/south_station: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I09fe0e903a1241212f81e2a897898356a7e372a9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25amd/persimmon: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Id2ef3e5aa0ea3f6e714eda6d9dbdf62fb96c0a74 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25amd/inagua: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Ie76291a8e227e49aae6fc6339cec2009ebd67fff Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25elmex/pcm205400: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Ib386b5d9ba636614016c3f9ac042fee43eac53f2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25asrock/e350m1: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I6ad99af55975b21b0a7671553246cdb5a1e19091 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25gizmosphere/gizmo: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I26e2450babfde1580e0e794c519344112d4019ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25pcengines/apu1: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I10b3e53a5e39764e3b199561d07391779804407c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25google/beltino: fix LED polarity for mccloud variantMatt DeVillier
The LED polarity was set incorrectly, fix using values derived from original Chromium sources: branch firmware-mccloud-5827.B, ToT src/mainboard/google/mccloud/smihandler.c src/mainboard/google/mccloud/romstage.c TEST: boot google/mccloud, observe power LED on normally, blinking in S3/S4, and off in S5. Change-Id: Ia1f63eebbccb48fcf8543188db390b23045d843e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25google/cyan: Increase RO coreboot size on flashMatt DeVillier
Commit 05627831826cab096789bd19f004b33a4cd70c0e applied this change to other Google boards, but cyan was left out. Bring cyan in line with other Google boards. Change-Id: Id86bea538a7b82367ea6ddbd3fe3efb1b1c0078d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-25google/cyan: Remove support for pre-EVT boardMatt DeVillier
Cleaning up code to remove support for pre-EVT rev of cyan board. Analogous to what was done for intel/strago in commit 103f00d. Change-Id: I29b32da8064e0743cc9c5df02ce7d3441459ee8f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Use GpioInt for Keyboard IRQJagadish Krishnamoorthy
Cherry-pick from Chromium commit a162348. Remove the hard coded IRQ number for the keyboard interrupt. IRQ number can change based upon the gpio bank index ordering. Hence pass the gpio bank and index number so that kernel calculates the IRQ number. Original-Change-Id: Icfe5c3995007164bf617575b541758c18ee63a1d Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I81ff19e3060c533ee76023c7651f741294e9db30 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Disable L1 sub stateT.H. Lin
Adapted from Chromium commit dc59188. Disable L1 sub state to prevent WiFi randomly disappear condition. Original-Change-Id: I8975bb4bbbc2fc89b91b06ae02716367890c672d Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Rajat Jain <rajatja@chromium.org> Original-Reviewed-by: Vincent Wang <vwang@chromium.org> Oriignal-Tested-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Change-Id: I51a1bcca6431e6bc28baf9b09433cec13db925c3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Add 2nd source memory 2-channel 4G (Micro/Samsung)T.H. Lin
Cherry-pick from Chromium commit 7f0cdf0. Cyan board add 4G DDR3L 2nd source memory (Micro/Samsung) Original-Change-Id: I12f82082d8227e61a97ce0a001d7d2b1f6613e06 Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Change-Id: Ieca7201346414d7a962f9619dbe846c67c0f02d6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Add 2nd source memory (Micro/Samsung)T.H. Lin
Cherry-pick from Chromium commit 3b578ef. Cyan board use new 2nd source memory (Micro/Samsung) Original-Change-Id: I6f4e8438faede7ac742776a622c265922e498898 Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Change-Id: Ie2febe4de57c00c269def15d57f2b5a6f0f378aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Fix Touchscreen InterruptJagadish Krishnamoorthy
Cherry-pick from Chromium commit 1138727. Elan touchscreen driver expects the first gpio resource in asl to be the reset line. The driver considers the gpio based irq line as reset gpio resource and changes the direction to output. This will cause irq registration to fail. Solution is to pass Interrupt resource for touchscreen irq instead of GpioInt. Original-Change-Id: Ia72d4ad80117f3c0014098113c9027416026e65e Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I1c4b029851e321feeedf713186976fbec42dd82e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Enable CA MirrorShobhit Srivastava
Cherry-pick from Chromium commit e49deb1. Configuring UPD PcdCaMirrorEn. This is a board specific parameter. CA mirror is the Command Address mirroring option that is board specific. Original-Change-Id: I05174e18d650332d838e5036c713e91c4840ee75 Original-Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Ibd0c811d41cb592634f7785edb83ad2f423546c5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Disable unused lines on Gpio North BankJagadish Krishnamoorthy
Cherry-pick from Chromium commit 1940eb6. The unused lines leads to spurious interrupts on few of the systems. Original-Change-Id: Ie539e1debc15dd1fd8707f8866c65714fc43e44b Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Original-Tested-by: Bernie Thompson <bhthompson@chromium.org> Change-Id: I6f4f7cec8ef11e781c66b6efff4188259469e41c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Clean-up the devicetreeRavi Sarawadi
Cherry-pick from Chromium 2b51633. Disable unused PCI devices. Update PCI DeviceID. Original-Change-Id: I34fa6e25f9178de959aad30cc979d787cf76b8ad Original-Signed-off-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7a06a1d44ce933000cbfe2eb71823ee66cb46a34 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Support reading Memory strap GPIOs to select SPDSubrata Banik
Cherry-pick from Chromium commit 8f63720. SoC GPIO to read Memory strap not getting configured correctly causing incorrect RAMID read during ROMSTAGE TEST=Build and boot the platform with differnt Memory type and read RAMID correctly inside spd.c RAMID = 0 => 4GB Samsung Memory RAMID = 1 => 4GB Hynix Memory RAMID = 2 => 2GB Samsung Memory RAMID = 3 => 2GB Hynix Memory Original-Change-Id: Ide9d4b5f73565cddd74cedf7afe4b7d168dde74c Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: If2ba9ec5be111b9c30360ffde41a2c644a69ecae Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-25mainboard/intel/cannonlake_rvp: SMBus, SAGV and Skip FSP MPInit in devicetreePratik Prajapati
Set SMBus, SAGV and Skip FSP MPInit configuration from devicetree.cb Change-Id: Ic810b003bf7fb13447d5d5dcd49cfcc31785b440 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Add LPC and SPI lock down config optionSubrata Banik
This patch to provide new config options to perform LPC and SPI lock down either by FSP or coreboot. Remove EISS bit programming as well. TEST=Build and boot Eve and Poppy. Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25mainboard/google/coral: Add USB2 phy setting override for SantaTim Chen
In order to pass type C USB2 eye diagram for sku Santa, USB2 port#1 PHY register needs to be overridden. port#1: PERPORTPETXISET = 7 PERPORTTXISET = 2 BUG=b:64880573 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: I07c0b7b0f08263a348befb7d6fd8d01028314470 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25amd/pi/hudson: Fix FCH ECMartin Roth
Move the fchec.h files, which do not seem mainboard specific, out of the mainboard directories into the southbridge/soc directories. Change-Id: Idd271c6ab618aa4badf81c702212e7de35317021 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-25soc/amd/stoneyridge: Move IMC ASL sourceKyösti Mälkki
This is not specific to a board but the binary IMC firmware used on the platform. Also remove unused IMSP and IMWK methods. Change-Id: I80026bca55f5ba236c080bcd882fc374559942e6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-25soc/amd/stoneyridge: Move oem_fan_control()Kyösti Mälkki
While at it, replace LibAmdMemFill() with memset(). Change-Id: I770cab446add8f305f02e365e7c9763df88cd958 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21192 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-25amd/pi/hudson: Move oem_fan_control()Martin Roth
It was not intentional to change oem_fan_control() to non-static with commit 23e5ba9 binarypi mainboards: Clean up IS_ENABLED fan control Every platform except bettong had its own static version of oem_fan_control, so remove the definition of oem_fan_control from imc.h, and move it out of imc.c into bettong's BiosCallOuts.c. Change-Id: Ie95ac1fd3a57259bb35796903aa8753ef0e70d70 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21189 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-25asrock/imb-a180: Remove commented oem_fan_control()Kyösti Mälkki
Change-Id: Ibfbb2ff2d9776fe91a8a09561d9c32eb49a56db6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-24mainboard/intel/cannonlake_rvp: set Max CPUs and Mainboard FamilyPratik Prajapati
Set MAX_CPUS and MAINBOARD_FAMILY for cannonlake RVP. Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: Ic6ef7e4f247ac2d227bab3b53512c659c5e72da7 Reviewed-on: https://review.coreboot.org/21152 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-24binarypi mainboards: Clean up IS_ENABLED fan controlMarshall Dawson
Remove all checks for #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) around the imc.h includes. Convert from #if to if() for all fan control setup code. Where necessary, make functions non-static to match the prototypes in imc.h. Change-Id: If88af42d00227285931829441909a982fc292b2b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24AGESA mainboards: Clean up IS_ENABLED fan controlMarshall Dawson
Remove all checks for #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) around the imc.h includes. Convert all #if to if() for fan control setup. Change-Id: I04a9fbbf6f64f45e1a0b544267bfe840ce7fa1d9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24amd/bettong: Fix IS_ENABLED for xHCIMarshall Dawson
Convert from #if to if(). Change-Id: Icf6db485735cb8bbadb3e742a079d0bafaacd79c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24mainboard/via*: Drop AMD car.h fileMarc Jones
Don't include src/include/cpu/amd/car.h in Via motherboards. Change-Id: I9d2b3cfb619cf831c7a677992ca03d5f42e5ffd1 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24gizmosphere/gizmo2: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Ief40319f5ff83c408e5a2b7f13572feabfab03a4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24biostar/am1ml: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I11ce2a558fe12f8f163dbe3dc52952a273b813ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24hp/abm: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Ie2f1eb5a101b9c392a7bd5cb2338dd6a6fdcfe52 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24hp/pavilion_m6_1035dx: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Iffc176522e943c003e2625d8e15341b281a261eb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/thatcher: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I7194eb910cccc454c5f20c23629ff2a45b1a9079 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/parmer: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I3730bf87030b7e20991e1de00d2024e4b02f4c19 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24bap/ode_e20XX: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Ia747b3bc149a672a6de2ecf0308141172321a493 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/olivehill: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I646a8f4cfc1df8648a72e58814c36ea66b48e9d7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24asrock/imb-a180: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I5e6e4cabe2b93c41da19412ec3ae2dfaa114bcc0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24msi/ms7721: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I39a0b4acbe44dca8be63201502be739d954c8a33 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24asus/f2a85-m: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I5a6373ac03d942cd16905c9e8360f7179b8eea61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/torpedo: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Iac0998a56b4e297c512fcba98d3dbb4253c9b526 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24mb/google/coral: Copy devicetree.cb from baseboardTim Chen
It is a copy from baseboard/devicetree.cb (coreboot.org ToT) BUG=b:64880573 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: I5db730c1974a96547fe7fda63689b7c5bfaefc66 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23src/mainboard/intel/cannonlake: Add gpio support for cannonlakezhaojohn
Add gpio pins configuration for cannonlake rvp u/y boards. Change-Id: Ia077a070979401fe7bd23bda110d2b66a038d9fc Signed-off-by: john zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23mb/lenovo/t430s: Enable libgfxinitBill XIE
Tested on T430s with an external screen connected to every one of the DP ports (miniDP on mainboard, two DP ports on dock), the GRUB payload can display on both the external screen and the internal LVDS screen. This is a copy-paste of I8f270d55 "mb/lenovo/x230: Enable libgfxinit". Change-Id: Ifb1471ecb18927c30c61c64011cbb0e20a465558 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-23sb/via/k8t890: Define ACPI sleep statesKyösti Mälkki
Change-Id: I9afd5eaab5f8e897dea037f32e1666ad31b0f8df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23soc/amd/stoneyridge ACPI: Sync sleepstates.asl definitionsKyösti Mälkki
Sync file with southbridge/amd/common/sleepstates.asl. SSFG was meant to be used as a mask to enable sleepstates _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. Change-Id: I674953f1a5add74e16ddd84c252e8d21501ffefd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23sb/amd/amd8111: Define ACPI sleep statesKyösti Mälkki
Note that against the specs, these definitions repeat the sleep type also in the reserved fields 3 and 4. For consistency, don't fix it here now. Entry for \_S3 is now masked off if HAVE_ACPI_RESUME=n. Change-Id: Icdc4c81d07fe7a99d5b0f8fa23e9443f58a40ab9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23AMD fam10 ACPI: Use common fixed sleepstates.aslKyösti Mälkki
SSFG was meant to be used as a mask to enable sleepstates _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. Note that all boards incorrectly had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. Change-Id: Ia948becff079383cbf861468da9e8a3ebbf213cb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23AGESA binaryPI: Consolidate and fix sleep statesKyösti Mälkki
SSFG was meant to be used as a mask to enable sleep states _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. State _S3 is now set conditionally if HAVE_ACPI_RESUME=y. For pi/hudson this had been fixed already preprocessor. Note that all boards had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. States _S1 and _S2 still appear enabled in ASL/AML but may not actually work. TEST: 'cat /sys/power/state' and notice choice 'mem' was removed from the list of available sleep states. Change-Id: I27d616871c1771f0c87d8fba23d4ce1569607765 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-22AMD K8 fam10-15: Consolidate post_cache_as_ram callKyösti Mälkki
Change-Id: I5e7890aafbc8c80716ee49690e306482a482a863 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20573 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-08-22google/kahlee: Enable ALS connected to ECAkshu Agrawal
Kahlee has an ambient light sensor connected to the EC. TEST=Can see the device in /sys/bus/iio BUG=b:62030268 Change-Id: Id1138a0fc5270489a734bdf8b1f4ac02d358c0df Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/21146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22mainboard/intel/cannonlake_rvp: remove redundant devicetree.cbPratik Prajapati
devicetree.cb of cannonlake-u and y variant gets picked up from src/mainboard/intel/cannonlake_rvp/variants/cnl_[u/y] Change-Id: I83f636c93407a6fe17114582506397c46d1b4e20 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-22mainboard/intel/cannonlake-y: populate PCI devicesPratik Prajapati
Define and populate PCI devices in devicetree for CNL-Y RVP Change-Id: I311437798274dd48b0898f0832bf03d86fd9d3a6 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-08-22mainboard/intel/cannonlake-u: populate PCI devicesPratik Prajapati
Define and populate PCI devices in devicetree for CNL-U RVP Change-Id: Id04f5efe77a04c180b5dd392da777195bd9fb7a3 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-08-22mainboard/google/coral: Overwrite family code for coral models.Harry Pan
This patch assigns the code of coral family, such that, the 'mosys platform family' returns 'Google_Coral'. BUG=b:64467244, b:64501879 BRANCH=none TEST=Examine 'mosys platform family' w/ new firmware. Change-Id: I1d8f8ca2166a1d80855608cf5b64b0cc7bf3dc93 Signed-off-by: Harry Pan <harry.pan@intel.com> Reviewed-on: https://review.coreboot.org/21136 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21Boards w/ Winbond superios: Use common config entry codeKeith Hui
Six mainboards with Winbond superios directly configure them in romstage.c. All use the common Winbond romstage code. Change them to use the common config entry code to allow for code refactoring such as [1]. Build tested. [1] https://review.coreboot.org/20988 Change-Id: Icecd52ec622b9da86edb07c52893f4db001e5562 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-21mainboard/asrock: add ASRock B75 Pro3-MIru Cai
Tested: - i5-3550 and DIMM configurations: 2+0+2+2, 0+2+2+2, 2+2+2+2, 4+2+4+2 - debug output from serial port, EHCI debug port not found - Arch Linux (Linux 4.11.5) loaded from SeaBIOS, GRUB2, and Linux payload - all PCI and PCI Express slots Issues: - sometimes the machine fails to boot, with serial debug output it can be seen it stucks after SMM initialization, and more likely to fail to boot when serial cable is attached - no S3 resume (not tested in vendor firmware) Change-Id: I94fbfcee06921538b32aa3c23efa642e7e405ef6 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-21google/snappy: Add Raydium touch screen supportKevin Chiu
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64821783 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I8852e38f01f82b80c2c9718b93baf5894dbd745b Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-21google/snappy: Add MELFAS touch screen supportKevin Chiu
Current coreboot does not create ACPI device for OS to recognize MELFAS touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64779224 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: If2bc910d641e0cf2b120ed883c5788542959f568 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21mainboard/google/poppy: Update VR config settingsFurquan Shaikh
Update Psi2Threshold, IccMax, ACLoadline and DCLoadline VR config settings to match that of soraka. BUG=b:62063434 BRANCH=None TEST=Build and boot poppy. Change-Id: I2c294eb14257d319e1e2d4d1e529481d921ba6f8 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21105 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-08-21mainboard/google/poppy: Remove MPS IMPV8 workaroundFurquan Shaikh
Poppy uses MPS2949 IMVP8 controller and does not need the VR workaround similar to Eve. Change-Id: If6fb1890e024e1488d278bbe0a71a1a63ee321af Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21104 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-08-20mb/gigabyte/ga-b75m-d3v: add libgfxinit supportBill XIE
On this device libgfxinit successfully initializes textmode and framebuffer mode on the device connected to the HDMI1 port. VGA port is not tested, due to lack of VGA with valid EDID. Every ports works on GNU/Linux with kernel version 4.9+80+deb9u1. Due to limitations within the libgfxinit's current build system, it needs "select NORTHBRIDGE_INTEL_IVYBRIDGE" to work, even it is PCH instead of CPU for which libgfxinit should be configured here. Change-Id: Ib1513fc57b79eebc5d047c2e24585731c44bc215 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-18drivers/i2c/rx6110sa: Drop I2C interface arbitrationNico Huber
Change-Id: Ib31e77eec639c231520198c0b978d6c3c1eadaed Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18mainboard/hp: Add HP Elitebook 8460pIru Cai
The code is based on autoport. I'm using a machine with discrete GPU, and gfx.* in devicetree.cb is from 2760p. It can be debug with serial port on dock. Tested: - CPU and memory: i5-2540M, 4G+0 - Arch Linux (Linux 4.11.7, SeaBIOS payload, with ATOM BIOS extracted from vendor UEFI firmware) - USB ports - SD card reader - WLAN - DP display - S3 Change-Id: I9c42723ba240a2e9b46998c1a8a708aebc66c604 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 2570pIru Cai
The code is based on autoport. The EHCI debug port is the upper USB port beside the battery. Tested and working: - CPU and memory: i7-3720QM, 4G+4G - Linux Mint with Linux 4.4 (SeaBIOS payload) - All USB ports - ExpressCard - WLAN - AC and battery status - S3 - Other devices detected: DVD drive, smartcard reader, fingerprint, bluetooth Not tested: - VGA and DP - Ethernet and modem - Dock Change-Id: I9f3cd124fc676d49add59e9f0a07f70a6bb0fff0 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 8470pIru Cai
The code is based on the code generated by autoport. The EHCI debug port is between the DP port and eSATA port. The serial port on dock can also be used for debugging. The model with discrete graphics is not tested. Tested and work: - memory: 0+4G, 4G+0, 4G+4G - Linux (Arch Linux with kernel 4.10.6) boot from SeaBIOS payload with native graphics init - WLAN - keyboard, trackpoint and touchpad - USB - serial port on dock - fan control - AC and battery status (EC) blobs: This laptop uses SMSC KBC1126 EC, and there are two blobs needed by it. You can use the tools in util/kbc1126/ to extract them and insert them to the coreboot image using the following configuration: -> Chipset -> Add firmware images for KBC1126 firmware Change-Id: Icbc051e2272b8ea73627940db15a56901d737472 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 2760pIru Cai
The code is generated by autoport. The flash chip is socketed beside the WLAN slot. The EHCI debug port is on right side of the laptop beside the RJ11 connector. Things that work: - memory: 0+8G, 4G+8G - Linux (Linux Mint 18.1 with Linux 4.4) - native graphics init + SeaBIOS payload with SeaVGABIOS - all 3 USB ports - WLAN - WWAN - SD card reader - expresscard - S3 suspend and resume - internal flashing after IFD is unlocked and coreboot is flashed - keyboard, trackpoint and touchpad - fan control - AC and battery status Issues: - Wacom digitizer does not work (even after I add it in DSDT) - GRUB payload will freeze (in all Elitebooks, including chainloading GRUB from SeaBIOS) Things that are not tested: - smart card reader - cable modem (EC) blobs: This laptop uses SMSC KBC1126-NU as EC. It needs two blobs in the flash chip. You can use the tools in util/kbc1126 to extract them from OEM firmware, and use the following configuration to insert them to coreboot image: -> Chipset -> Add firmware images for KBC1126 firmware Change-Id: I3ffdb9f9c71f6c9a84e896abc3c424c8dd4bed0e Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-17mainboard/google/poppy: Add ACPI objects for NVMEM device GT24C16S and CAT24C16V Sowmya
The Giantec semiconductor GT24C16S and ON semiconductor CAT24C16 are the industrial standard electrically erasable programmable read only memory (EEPROM's) and this patch adds ACPI objects and power resources for NVMEM device. Update DOVD method to set sensor IO LDO voltage and remove repetitive code from OVFI, VCMP and NVMP power resources. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Read the NVMEM content via sysfs interface. Change-Id: If49ed33b7e1de1eabf317b31ceed8568dfca0aae Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-17mainboard/google/coral: Add keyboard backlight supportSheng-Liang Pan
BUG=b:64705535 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage and verify the keyboard backlight can be bright and alt+f6, alt+f7 function keys can be used. Change-Id: I777247a6b58d3d50b72f12ca2fcab49a06ed5431 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/21027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-16AGESA f14: Sacrifice ACPI S3 support for EARLY_CBMEM_INITKyösti Mälkki
A decision has been made that boards with LATE_CBMEM_INIT will be dropped from coreboot master starting with next release scheduled for October 2017. As existing implementation of CAR teardown in AGESA can only do either EARLY_CBMEM_INIT or ACPI S3 support, choose the former. ACPI S3 support may be brought back at a later date for these platforms but that requires fair amount of work fixing the MTRR issues causing low-memory corruptions. Change-Id: I5d21cf6cbe02ded67566d37651c2062b436739a3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>